[PATCH 0/5] Add HDMI PLL Algorithm for SNPS/C10PHY

[Jani Nikula]

On Wed, 22 Jan 2025, "Nautiyal, Ankit K" <ankit.k.nautiyal at intel.com> wrote:
> On 1/22/2025 4:15 AM, Almahallawy, Khaled wrote:
>> Thank You for the series.
>> Tested a modeline that is not pre-computed and able to see pixel clock
>> calculation done correctly and the analyzer turns on:
>>
>> adjusted mode: "3440x1440": 50 265250 3440 3488 3520 3600 1440 1443
>> 1453 1474 0x48 0x9
>> crtc timings: clock=265250, hd=3440 hb=3440-3600 hs=3488-3520 ht=3600,
>> vd=1440 vb=1440-1474 vs=1443-1453 vt=1474, flags=0x9
>>
>> Tested-by: Khaled Almahallawy <khaled.almahallawy at intel.com>
>
> Thanks Khaled for the testing.
>
> Jani, does the series looks alright to merge?

Acked-by: Jani Nikula <jani.nikula at intel.com>


>
>
> Regards,
>
> Ankit
>
>>
>> On Mon, 2025-01-20 at 09:51 +0530, Ankit Nautiyal wrote:
>>> The HDMI PLL programming involves pre-calculated values for specific
>>> frequencies and an algorithm to compute values for other frequencies.
>>> While the algorithm itself wasn't part of the driver, tables were
>>> added based on it for known modes.
>>>
>>> Some HDMI modes were pruned due to lack of support (for example
>>> issues
>>> [1],[2], and [3]).
>>> This series adds the algorithm for computing HDMI PLLs for
>>> SNPS/C10PHY
>>> to work with all modes supported by the hardware.
>>>
>>> The original algorithm uses floating-point math, which has been
>>> converted to integers while preserving precision. As a result,
>>> the values in the existing computable tables are very close but not
>>> exact. Testing with DG2 and MTL on various panels revealed no issues.
>>>
>>> [1] https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9722
>>> [2] https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10654
>>> [3] https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10956
>>>
>>> Rev2:
>>> -Change the name of the new file for HDMI PLL algorithm.
>>> -Fix styling issues and bit refactoring for readbility.
>>> -Fix issues reported by kernel test bot.
>>>
>>> Rev3:
>>> -Modify the names of helper functions to align with filename.
>>>
>>> Rev4:
>>> -Rebase, added Bspec references, and address review comments.
>>>
>>> Ankit Nautiyal (5):
>>>    drm/i915/display: Add support for SNPS PHY HDMI PLL algorithm for
>>> DG2
>>>    drm/i915/snps_phy: Use HDMI PLL algorithm for DG2
>>>    drm/i915/cx0_phy_regs: Add C10 registers bits
>>>    drm/i915/intel_snps_hdmi_pll: Compute C10 HDMI PLLs with algorithm
>>>    drm/i915/cx0_phy: Use HDMI PLL algorithm for C10 PHY
>>>
>>>   drivers/gpu/drm/i915/Makefile                 |   1 +
>>>   drivers/gpu/drm/i915/display/intel_cx0_phy.c  |  49 +--
>>>   drivers/gpu/drm/i915/display/intel_cx0_phy.h  |   1 -
>>>   .../gpu/drm/i915/display/intel_cx0_phy_regs.h |  24 ++
>>>   drivers/gpu/drm/i915/display/intel_hdmi.c     |  12 -
>>>   .../drm/i915/display/intel_snps_hdmi_pll.c    | 364
>>> ++++++++++++++++++
>>>   .../drm/i915/display/intel_snps_hdmi_pll.h    |  17 +
>>>   drivers/gpu/drm/i915/display/intel_snps_phy.c |  37 +-
>>>   drivers/gpu/drm/i915/display/intel_snps_phy.h |   1 -
>>>   drivers/gpu/drm/xe/Makefile                   |   1 +
>>>   10 files changed, 427 insertions(+), 80 deletions(-)
>>>   create mode 100644
>>> drivers/gpu/drm/i915/display/intel_snps_hdmi_pll.c
>>>   create mode 100644
>>> drivers/gpu/drm/i915/display/intel_snps_hdmi_pll.h
>>>

-- 
Jani Nikula, Intel