[PATCH 03/17] drm/i915/ddi: Make all the PORT_WIDTH macros work the same way

[Imre Deak]

Make the PORT_WIDTH macro of the XELPDP_PORT_CTL1 register work the same
way as those used for the DDI_BUF_CTL and the TRANS_DDI_FUNC_CTL
registers: accept a width parameter and convert it to the given
register's encoding.

Signed-off-by: Imre Deak <imre.deak at intel.com>
---
 .../gpu/drm/i915/display/intel_cx0_phy_regs.h |  3 ++-
 drivers/gpu/drm/i915/display/intel_ddi.c      | 22 ++-----------------
 2 files changed, 4 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h b/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
index 4a3cf08007e31..a24531656aa89 100644
--- a/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
+++ b/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
@@ -110,7 +110,8 @@
 #define   XELPDP_TCSS_POWER_REQUEST			REG_BIT(5)
 #define   XELPDP_TCSS_POWER_STATE			REG_BIT(4)
 #define   XELPDP_PORT_WIDTH_MASK			REG_GENMASK(3, 1)
-#define   XELPDP_PORT_WIDTH(val)			REG_FIELD_PREP(XELPDP_PORT_WIDTH_MASK, val)
+#define   XELPDP_PORT_WIDTH(width)			REG_FIELD_PREP(XELPDP_PORT_WIDTH_MASK, \
+								       (width) == 3 ? 4 : (width) - 1)
 
 #define _XELPDP_PORT_BUF_CTL2(idx)			_MMIO(_PICK_EVEN_2RANGES(idx, PORT_TC1, \
 										 _XELPDP_PORT_BUF_CTL1_LN0_A, \
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 36e7dde422d37..76e8296cb134b 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -2525,23 +2525,6 @@ static void intel_ddi_mso_configure(const struct intel_crtc_state *crtc_state)
 		     OVERLAP_PIXELS_MASK, dss1);
 }
 
-static u8 mtl_get_port_width(u8 lane_count)
-{
-	switch (lane_count) {
-	case 1:
-		return 0;
-	case 2:
-		return 1;
-	case 3:
-		return 4;
-	case 4:
-		return 3;
-	default:
-		MISSING_CASE(lane_count);
-		return 4;
-	}
-}
-
 static void
 mtl_ddi_enable_d2d(struct intel_encoder *encoder)
 {
@@ -2575,7 +2558,7 @@ static void mtl_port_buf_ctl_program(struct intel_encoder *encoder,
 	enum port port = encoder->port;
 	u32 val = 0;
 
-	val |= XELPDP_PORT_WIDTH(mtl_get_port_width(crtc_state->lane_count));
+	val |= XELPDP_PORT_WIDTH(crtc_state->lane_count);
 
 	if (intel_dp_is_uhbr(crtc_state))
 		val |= XELPDP_PORT_BUF_PORT_DATA_40BIT;
@@ -3490,10 +3473,9 @@ static void intel_ddi_enable_hdmi(struct intel_atomic_state *state,
 		buf_ctl |= DDI_A_4_LANES;
 
 	if (DISPLAY_VER(dev_priv) >= 14) {
-		u8  lane_count = mtl_get_port_width(crtc_state->lane_count);
 		u32 port_buf = 0;
 
-		port_buf |= XELPDP_PORT_WIDTH(lane_count);
+		port_buf |= XELPDP_PORT_WIDTH(crtc_state->lane_count);
 
 		if (dig_port->lane_reversal)
 			port_buf |= XELPDP_PORT_REVERSAL;
-- 
2.44.2