[PATCH 05/14] drm/i915/dp: Move max DSC BPP reduction one level higher
Imre Deak
imre.deak at intel.com
Fri Jan 31 14:26:24 UTC 2025
On Fri, Jan 31, 2025 at 02:49:58PM +0200, Jani Nikula wrote:
> Now that {icl,xelpd}_dsc_compute_link_config() take .4 fixed point as
> parameter, move the common max DSC BPP reduction one level higher. Use
> intel_dp_dsc_bpp_step() to compute the step, and pass on to both
> platform specific functions. (Though it's unused for now in
> icl_dsc_compute_link_config()).
>
> We can drop the pipe_bpp and connector parameters.
>
> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
Reviewed-by: Imre Deak <imre.deak at intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_dp.c | 32 +++++++++++--------------
> 1 file changed, 14 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index b13d806c9de7..4e7b3dd4067c 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -2079,14 +2079,10 @@ icl_dsc_compute_link_config(struct intel_dp *intel_dp,
> const struct link_config_limits *limits,
> int min_bpp_x16,
> int max_bpp_x16,
> - int pipe_bpp,
> + int bpp_step_x16,
> int timeslots)
> {
> int i, ret;
> - int output_bpp = intel_dp_output_bpp(pipe_config->output_format, pipe_bpp);
> -
> - /* Compressed BPP should be less than the Input DSC bpp */
> - max_bpp_x16 = min(max_bpp_x16, fxp_q4_from_int(output_bpp - 1));
>
> for (i = ARRAY_SIZE(valid_dsc_bpp) - 1; i >= 0; i--) {
> if (valid_dsc_bpp[i] < fxp_q4_to_int(min_bpp_x16) ||
> @@ -2116,24 +2112,17 @@ icl_dsc_compute_link_config(struct intel_dp *intel_dp,
> */
> static int
> xelpd_dsc_compute_link_config(struct intel_dp *intel_dp,
> - const struct intel_connector *connector,
> struct intel_crtc_state *pipe_config,
> const struct link_config_limits *limits,
> int min_bpp_x16,
> int max_bpp_x16,
> - int pipe_bpp,
> + int bpp_step_x16,
> int timeslots)
> {
> struct intel_display *display = to_intel_display(intel_dp);
> - int output_bpp = intel_dp_output_bpp(pipe_config->output_format, pipe_bpp);
> - int bpp_x16, bpp_step_x16;
> + int bpp_x16;
> int ret;
>
> - bpp_step_x16 = intel_dp_dsc_bpp_step_x16(connector);
> -
> - /* Compressed BPP should be less than the Input DSC bpp */
> - max_bpp_x16 = min(max_bpp_x16, fxp_q4_from_int(output_bpp) - bpp_step_x16);
> -
> for (bpp_x16 = max_bpp_x16; bpp_x16 >= min_bpp_x16; bpp_x16 -= bpp_step_x16) {
> if (intel_dp->force_dsc_fractional_bpp_en &&
> !fxp_q4_to_frac(bpp_x16))
> @@ -2165,9 +2154,10 @@ static int dsc_compute_compressed_bpp(struct intel_dp *intel_dp,
> {
> struct intel_display *display = to_intel_display(intel_dp);
> const struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
> + int output_bpp;
> int dsc_min_bpp;
> int dsc_max_bpp;
> - int min_bpp_x16, max_bpp_x16;
> + int min_bpp_x16, max_bpp_x16, bpp_step_x16;
> int dsc_joiner_max_bpp;
> int num_joined_pipes = intel_crtc_num_joined_pipes(pipe_config);
>
> @@ -2182,11 +2172,17 @@ static int dsc_compute_compressed_bpp(struct intel_dp *intel_dp,
> min_bpp_x16 = fxp_q4_from_int(dsc_min_bpp);
> max_bpp_x16 = fxp_q4_from_int(dsc_max_bpp);
>
> + bpp_step_x16 = intel_dp_dsc_bpp_step_x16(connector);
> +
> + /* Compressed BPP should be less than the Input DSC bpp */
> + output_bpp = intel_dp_output_bpp(pipe_config->output_format, pipe_bpp);
> + max_bpp_x16 = min(max_bpp_x16, fxp_q4_from_int(output_bpp) - bpp_step_x16);
> +
> if (DISPLAY_VER(display) >= 13)
> - return xelpd_dsc_compute_link_config(intel_dp, connector, pipe_config, limits,
> - min_bpp_x16, max_bpp_x16, pipe_bpp, timeslots);
> + return xelpd_dsc_compute_link_config(intel_dp, pipe_config, limits,
> + min_bpp_x16, max_bpp_x16, bpp_step_x16, timeslots);
> return icl_dsc_compute_link_config(intel_dp, pipe_config, limits,
> - min_bpp_x16, max_bpp_x16, pipe_bpp, timeslots);
> + min_bpp_x16, max_bpp_x16, bpp_step_x16, timeslots);
> }
>
> int intel_dp_dsc_min_src_input_bpc(void)
> --
> 2.39.5
>
More information about the Intel-xe
mailing list