[PATCH v7 1/5] i2c: designware: Use polling by default when there is no irq resource

[Raag Jadav]

From: Heikki Krogerus <heikki.krogerus at linux.intel.com>

The irq resource itself can be used as a generic way to
determine when polling is needed.

This not only removes the need for special additional device
properties that would soon be needed when the platform may
or may not have the irq, but it also removes the need to
check the platform in the first place in order to determine
is polling needed or not.

Signed-off-by: Heikki Krogerus <heikki.krogerus at linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti at linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-platdrv.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 879719e91df2..3104f52e32be 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -205,25 +205,28 @@ static void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev)
 
 static int dw_i2c_plat_probe(struct platform_device *pdev)
 {
+	u32 flags = (uintptr_t)device_get_match_data(&pdev->dev);
 	struct device *device = &pdev->dev;
 	struct i2c_adapter *adap;
 	struct dw_i2c_dev *dev;
 	int irq, ret;
 
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
+	irq = platform_get_irq_optional(pdev, 0);
+	if (irq == -ENXIO)
+		flags |= ACCESS_POLLING;
+	else if (irq < 0)
 		return irq;
 
 	dev = devm_kzalloc(device, sizeof(*dev), GFP_KERNEL);
 	if (!dev)
 		return -ENOMEM;
 
-	dev->flags = (uintptr_t)device_get_match_data(device);
 	if (device_property_present(device, "wx,i2c-snps-model"))
-		dev->flags = MODEL_WANGXUN_SP | ACCESS_POLLING;
+		flags = MODEL_WANGXUN_SP | ACCESS_POLLING;
 
 	dev->dev = device;
 	dev->irq = irq;
+	dev->flags = flags;
 	platform_set_drvdata(pdev, dev);
 
 	ret = dw_i2c_plat_request_regs(dev);
-- 
2.34.1