[PATCH v5 10/11] drm/xe/configfs: Only allow configurations for supported devices

[Rodrigo Vivi]

On Wed, Jul 30, 2025 at 09:57:01PM +0200, Michal Wajdeczko wrote:
> 
> 
> On 7/30/2025 8:28 PM, Rodrigo Vivi wrote:
> > On Wed, Jul 30, 2025 at 10:12:06AM -0700, John Harrison wrote:
> >> On 7/30/2025 9:30 AM, Rodrigo Vivi wrote:
> >>> On Wed, Jul 30, 2025 at 10:23:22AM +0200, Michal Wajdeczko wrote:
> >>>> On 7/30/2025 12:20 AM, John Harrison wrote:
> >>>>> On 7/29/2025 2:40 PM, Rodrigo Vivi wrote:
> >>>>>> On Tue, Jul 29, 2025 at 01:42:14PM +0200, Michal Wajdeczko wrote:
> >>>>>>> Since we already lookup for the real PCI device before we allow
> >>>>>>> to create its directory config, we might also check if the found
> >>>>>>> device matches our driver PCI ID list. This will prevent creation
> >>>>>>> of the directory configs for the unsupported devices.
> >>>>>>>
> >>>>>>> Signed-off-by: Michal Wajdeczko <michal.wajdeczko at intel.com>
> >>>>>>> Cc: Lucas De Marchi <lucas.demarchi at intel.com>
> >>>>>>> ---
> >>>>>>> v2: rebased
> >>>>>>> ---
> >>>>>>>    drivers/gpu/drm/xe/xe_configfs.c | 17 +++++++++++++++++
> >>>>>>>    1 file changed, 17 insertions(+)
> >>>>>>>
> >>>>>>> diff --git a/drivers/gpu/drm/xe/xe_configfs.c b/drivers/gpu/drm/xe/xe_configfs.c
> >>>>>>> index 5f145ccdf535..766775772eef 100644
> >>>>>>> --- a/drivers/gpu/drm/xe/xe_configfs.c
> >>>>>>> +++ b/drivers/gpu/drm/xe/xe_configfs.c
> >>>>>>> @@ -275,11 +275,22 @@ static const struct config_item_type xe_config_device_type = {
> >>>>>>>        .ct_owner    = THIS_MODULE,
> >>>>>>>    };
> >>>>>>>    +static const struct xe_device_desc *xe_match_desc(struct pci_dev *pdev)
> >>>>>>> +{
> >>>>>>> +    struct device_driver *driver = driver_find("xe", &pci_bus_type);
> >>>>>>> +    struct pci_driver *drv = to_pci_driver(driver);
> >>>>>>> +    const struct pci_device_id *ids = drv ? drv->id_table : NULL;
> >>>>>>> +    const struct pci_device_id *found = pci_match_id(ids, pdev);
> >>>>>>> +
> >>>>>>> +    return found ? (const void *)found->driver_data : NULL;
> >>>>>>> +}
> >>>>>>> +
> >>>>>>>    static struct config_group *xe_config_make_device_group(struct config_group *group,
> >>>>>>>                                const char *name)
> >>>>>>>    {
> >>>>>>>        unsigned int domain, bus, slot, function;
> >>>>>>>        struct xe_config_group_device *dev;
> >>>>>>> +    const struct xe_device_desc *match;
> >>>>>>>        struct pci_dev *pdev;
> >>>>>>>        char canonical[16];
> >>>>>>>        int ret;
> >>>>>>> @@ -297,8 +308,14 @@ static struct config_group *xe_config_make_device_group(struct config_group *gro
> >>>>>>>        pdev = pci_get_domain_bus_and_slot(domain, bus, PCI_DEVFN(slot, function));
> >>>>>>>        if (!pdev)
> >>>>>>>            return ERR_PTR(-ENODEV);
> >>>>>>> +
> >>>>>>> +    match = xe_match_desc(pdev);
> >>>>>>> +
> >>>>>>>        pci_dev_put(pdev);
> >>>>>>>    +    if (!match)
> >>>>>>> +        return ERR_PTR(-ECANCELED);
> >>>>>> why ECANCELED instead of ENODEV?
> >>>>> Or EINVAL? This is for when a user has created a directory for a PCI device that exists but it is not a Xe device? Seems like ENODEV is not the correct option given that the device does exist. But ECANCELED also seems odd.
> >>>> we can always return -EINVAL but user will have no clue what went wrong
> >>>>
> >>>> so the idea was:
> >>>>
> >>>> -EINVAL     when config directory name is malformed
> >>>> -ENODEV     config directory name is correct but
> >>>>              there is no such device under such BDF
> >>>> -ECANCELED  when device exists but it is not covered by Xe driver
> >>>>
> >>>> since you both don't like -ECANCELED for this case, what about:
> >>>>
> >>>> -ECONNREFUSED /* Connection refused */
> >>>> -EOPNOTSUPP   /* Operation not supported on transport endpoint */
> >>>> -ENXIO        /* No such device or address */
> >>> What about -ENODEV, but with debug messages to differentiate the cases?
> >>>
> >>> Otherwise -ENXIO seems the best of the alternatives here.
> >> I'm confused by what is wrong with EINVAL. Are there many other paths that
> >> can return EINVAL for this operation? If not then how is any other return
> >> code any different from a user confusion point of view? But yes, I think at
> >> least a debug message to say "requested device is not supported by this
> >> driver" would be good.
> > 
> > to me it looks more like a 'no device' than 'invalid device', hence my
> > thought on the enodev, but no strong/hard preference to be honest.
> > and we are definitely on the same page that there
> > shouldn't be nothing wrong with reusing the error code and printing the
> > debug message like 'requested device is not supported by this driver'...
> 
> looking at pci/iov.c where some diag messages are given:
> 
> 	/* is PF driver loaded */
> 	if (!pdev->driver) {
> 		pci_info(pdev, "no driver bound to device; cannot configure SR-IOV\n");
> 		ret = -ENOENT;
> 		goto exit;
> 	}
> 
> 	/* is PF driver loaded w/callback */
> 	if (!pdev->driver->sriov_configure) {
> 		pci_info(pdev, "driver does not support SR-IOV configuration via sysfs\n");
> 		ret = -ENOENT;
> 		goto exit;
> 	}
> 
> so maybe we should use -ENOENT
> 
> $ sudo mkdir /sys/kernel/config/xe/0000:00:07.0
> mkdir: cannot create directory ‘/sys/kernel/config/xe/0000:00:07.0’: No such file or directory
> 
> and print message using pci_info() like this
> 
> pcieport 0000:00:07.0: xe driver does not support configuration of this device

works for me.


> 
> 
> > 
> >>
> >> John.
> >>
> >>
> >>>>> John.
> >>>>>
> >>>>>>> +
> >>>>>>>        dev = kzalloc(sizeof(*dev), GFP_KERNEL);
> >>>>>>>        if (!dev)
> >>>>>>>            return ERR_PTR(-ENOMEM);
> >>>>>>> -- 
> >>>>>>> 2.47.1
> >>>>>>>
> >>
>