[PATCH v3 1/4] drm/xe/bmg: Update Wa_14022085890
Summers, Stuart
stuart.summers at intel.com
Wed Jun 4 00:06:52 UTC 2025
On Tue, 2025-06-03 at 13:31 -0700, Belgaumkar, Vinay wrote:
>
> On 6/3/2025 12:31 PM, Summers, Stuart wrote:
> > On Tue, 2025-06-03 at 11:41 -0700, Belgaumkar, Vinay wrote:
> > > On 6/3/2025 10:36 AM, Summers, Stuart wrote:
> > > > On Mon, 2025-06-02 at 16:44 -0700, Vinay Belgaumkar wrote:
> > > > > Set GT min frequency to 1200Mhz once driver load is
> > > > > complete.
> > > > >
> > > > > v2: Review comments (Rodrigo)
> > > > > v3: Apply Wa earlier so user_req_min is not clobbered.
> > > > >
> > > > > Cc: Matt Roper <matthew.d.roper at intel.com>
> > > > > Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
> > > > > Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar at intel.com>
> > > > > ---
> > > > > drivers/gpu/drm/xe/xe_guc_pc.c | 5 +++++
> > > > > drivers/gpu/drm/xe/xe_wa_oob.rules | 1 +
> > > > > 2 files changed, 6 insertions(+)
> > > > >
> > > > > diff --git a/drivers/gpu/drm/xe/xe_guc_pc.c
> > > > > b/drivers/gpu/drm/xe/xe_guc_pc.c
> > > > > index 18c623992035..cb0563494fcc 100644
> > > > > --- a/drivers/gpu/drm/xe/xe_guc_pc.c
> > > > > +++ b/drivers/gpu/drm/xe/xe_guc_pc.c
> > > > > @@ -51,6 +51,7 @@
> > > > >
> > > > > #define LNL_MERT_FREQ_CAP 800
> > > > > #define BMG_MERT_FREQ_CAP 2133
> > > > > +#define BMG_MIN_FREQ 1200
> > > > >
> > > > > #define SLPC_RESET_TIMEOUT_MS 5 /* roughly 5ms, but no
> > > > > need for
> > > > > precision */
> > > > > #define SLPC_RESET_EXTENDED_TIMEOUT_MS 1000 /* To be used
> > > > > only
> > > > > at
> > > > > pc_start */
> > > > > @@ -843,6 +844,9 @@ static int pc_adjust_freq_bounds(struct
> > > > > xe_guc_pc
> > > > > *pc)
> > > > > if (pc_get_min_freq(pc) > pc->rp0_freq)
> > > > > ret = pc_set_min_freq(pc, pc->rp0_freq);
> > > > >
> > > > > + if (XE_WA(pc_to_gt(pc), 14022085890))
> > > > > + ret = pc_set_min_freq(pc, max(BMG_MIN_FREQ,
> > > > > pc_get_min_freq(pc)));
> > > > Do we want this above the get_min_freq() call above? Seems like
> > > > that
> > > > would further limit which is what we'd want in that case right?
> > > No, this is during SLPC init, we don't need to read the min freq
> > > at
> > > this
> > > point. We will adjust it later in the flow if there was a user
> > > request.
>
> This ensures min frequency is set to 1200. That is required by the
> WA.
> If there was no previous user request (like before a GT reset), the
> min
> will be set to 1200 instead of the usual RPe (which is around 500).
Ok makes sense to me. I did confirm the workaround frequency called out
in bspec matches here:
Reviewed-by: Stuart Summers <stuart.summers at intel.com>
>
> Thanks,
>
> Vinay.
>
> > So then what is the purpose of the code just above this?
> >
> > -Stuart
> >
> > > Thanks,
> > >
> > > Vinay.
> > >
> > > > Thanks,
> > > > Stuart
> > > >
> > > > > +
> > > > > out:
> > > > > return ret;
> > > > > }
> > > > > @@ -879,6 +883,7 @@ static int pc_set_mert_freq_cap(struct
> > > > > xe_guc_pc
> > > > > *pc)
> > > > > ret = xe_guc_pc_get_min_freq(pc, &pc-
> > > > > > stashed_min_freq);
> > > > > if (!ret)
> > > > > ret = xe_guc_pc_get_max_freq(pc,
> > > > > &pc-
> > > > > > stashed_max_freq);
> > > > > +
> > > > > if (ret)
> > > > > return ret;
> > > > >
> > > > > diff --git a/drivers/gpu/drm/xe/xe_wa_oob.rules
> > > > > b/drivers/gpu/drm/xe/xe_wa_oob.rules
> > > > > index 9efc5accd43d..75fbdab68d44 100644
> > > > > --- a/drivers/gpu/drm/xe/xe_wa_oob.rules
> > > > > +++ b/drivers/gpu/drm/xe/xe_wa_oob.rules
> > > > > @@ -59,3 +59,4 @@ no_media_l3 MEDIA_VERSION(3000)
> > > > > MEDIA_VERSION_RANGE(1301, 3000)
> > > > > 16026508708 GRAPHICS_VERSION_RANGE(1200, 3001)
> > > > > MEDIA_VERSION_RANGE(1300, 3000)
> > > > > +14022085890 GRAPHICS_VERSION(2001)
More information about the Intel-xe
mailing list