[PATCH 08/20] drm/i915/dp: Remove the device service IRQ handling from connector detect

[Imre Deak]

From: Imre Deak <imre.deak at gmail.com>

The device service IRQ handling was added to the connector detect
function by

commit 09b1eb130e43 ("drm/i915: Move Displayport test request and sink
IRQ logic to intel_dp_detect()")

since some Automated Test Request IRQs couldn't be handled in the short
HPD IRQ handler context. This has been fixed meanwhile by deferring the
handling of all test request events from the IRQ handler to the hotplug
handler (intel_dp_short_pulse() -> intel_dp_test_short_pulse() ->
reprobe) and by handling all hotplug events (both for short and long HPD
pulses) in the test application.

Handling device IRQs during connector detection is not standard
compliant (the IRQs should be handled when an HPD IRQ is raised) and it
happens in a racy way with the same device IRQ handling happening from
the HPD IRQ handler (since the detect and HPD IRQ handler can run in
parallel).

Based on the above, remove the redundant call from the detect function.

Signed-off-by: Imre Deak <imre.deak at gmail.com>
---
 drivers/gpu/drm/i915/display/intel_dp.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 2592afb96ab58..aacea2d7b9738 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -5940,8 +5940,6 @@ intel_dp_detect(struct drm_connector *_connector,
 	if (intel_dp_is_edp(intel_dp) || connector->detect_edid)
 		status = connector_status_connected;
 
-	intel_dp_check_device_service_irq(intel_dp);
-
 out_unset_edid:
 	if (status != connector_status_connected && !intel_dp->is_mst)
 		intel_dp_unset_edid(intel_dp);
-- 
2.44.2