[Libdlo] dlfb 0.2rc2 (udlfb)

[Greg KH]

On Wed, May 27, 2009 at 11:55:25PM -0700, Greg KH wrote:
> On Tue, May 26, 2009 at 04:05:31PM +0200, Roberto De Ioris wrote:
> > Hi all this is a second release candidate for the displaylink
> > framebuffer linux module.
> > 
> > It implements edid (the devices is set to the best display resolution
> > dinamically), multiple devices connected to the same system, and some
> > code refactoring.
> > 
> > Resolutions supported are:
> > 
> > 1400x1050
> > 1280x1024
> > 1024x768
> > 800x480
> > 
> > tested on
> > 
> > vibook
> > mimo display 710 and 730
> > hp docking station
> > asus vw223
> 
> Hm, I get the following error when plugging this into a displaylink
> device that is attached to a viewsonic monitor:
> [  345.176855] udlfb 1-6.1.4.4:1.0: usb_probe_interface
> [  345.176858] udlfb 1-6.1.4.4:1.0: usb_probe_interface - got id
> [  345.176861] DisplayLink device attached
> [  345.177274] ret control msg 0: 4 0500fffffff0
> [  345.228207] EDID XRES 0 YRES 0
> [  345.228214] INIT VIDEO 0 800 480
> [  345.228218] INIT VIDEO 1 1024 768
> [  345.228222] INIT VIDEO 2 1280 1024
> [  345.228227] INIT VIDEO 3 1400 1050
> [  345.228250] udlfb: probe of 1-6.1.4.4:1.0 failed with error -12
> 
> Something not nice with my EDID tables for the monitor?

Ok, odd, I added some debugging, and it now works, let me poke at this
some more...

greg k-h