[Libdlo] DirectFB support?

[Tim Stowell]

Hi,

I have successfully compiled Directfb, and whenever I try to run an
example program, it says everything is working but all I see is a
green screen, sample output is below:


 ~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.5.0 |~~~~~~~~~~~~~~~~~~~~~~~~~~
       (c) 2001-2010  The world wide DirectFB Open Source Community
       (c) 2000-2004  Convergence (integrated media) GmbH
     ----------------------------------------------------------------

(*) DirectFB/Core: Single Application Core. (2010-12-17 00:26)
(*) Direct/Thread: Started 'VT Switcher' (4405) [CRITICAL OTHER/OTHER
0/0] <8388608>...
(*) Direct/Thread: Started 'VT Flusher' (4406) [DEFAULT OTHER/OTHER
0/0] <8388608>...
(*) DirectFB/FBDev: Found 'udlfb' (ID 0) with frame buffer at
0xc8854000, 3752k (MMIO 0x00000000, 0k)
(*) Direct/Thread: Started 'PS/2 Input' (4407) [INPUT OTHER/OTHER 0/0]
<8388608>...
(*) DirectFB/Input: IMPS/2 Mouse 1.0 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (4408) [INPUT OTHER/OTHER
0/0] <8388608>...
(*) DirectFB/Input: Macintosh mouse button emulatio (1) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (4409) [INPUT OTHER/OTHER
0/0] <8388608>...
(*) DirectFB/Input: em28xx snapshot button (2) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Hotplug with Linux Input' (4410) [INPUT
OTHER/OTHER 0/0] <8388608>...
(*) DirectFB/Input: Hot-plug detection enabled with Linux Input Driver
(*) Direct/Thread: Started 'Keyboard Input' (4411) [INPUT OTHER/OTHER
0/0] <8388608>...
(*) DirectFB/Input: Keyboard 0.9 (directfb.org)
(*) DirectFB/Genefx: MMX detected and enabled
(*) DirectFB/Graphics: MMX Software Rasterizer 0.6 (directfb.org)
(*) DirectFB/Core/WM: Default 0.3 (directfb.org)
(*) FBDev/Mode: Setting 1600x1200 RGB16
(*) FBDev/Mode: Switched to 1600x1200 (virtual 1600x1200) at 16 bit
(RGB16), pitch 3200

Is there something simple I'm missing? I'm using udlfb with a DL-165
usb device, at /dev/fb0 thanks!