[Libdlo] Trying to get libdlo running with Kensington K33367 Notebook, Expansion Dock with Video (VGA)

[Willi Herzig]

Hello,

I am trying to get libdlo running with a Kensington K33367 Notebook
Expansion Dock with Video (VGA) (see
http://us.kensington.com/html/11613.html).

This device works well running on Windows/XP.

I am now trying to use it using Debian squeeze on a sheevaplug.

I have tried the instruction on http://libdlo.freedesktop.org/wiki/
using libdlo-0.1.2.tar.gz.

The library compiles fine using
	./configure
	sudo make install

But when I try "make check" I got the following errors (see also below).

	test: basic graphics tests...
	test: device info: uid &27148
	test: device info: serial 0030-102AB6
	test: device info: type  &0
	test: native mode info...
	  0x0 @ 0 Hz 0 bpp base &0
	test: set_mode...
	test: error 20 'error sending control message: Broken pipe'
	FAIL: test/test1

Nothing shows on the screen.

The following devices are specific for the device (diff of lsusb after
plugging it in):
	< Bus 001 Device 126: ID 0409:005a NEC Corp. HighSpeed Hub
	< Bus 001 Device 125: ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter
	< Bus 001 Device 124: ID 17e9:0030 Newnham Research
	< Bus 001 Device 123: ID 0b95:7720 ASIX Electronics Corp. AX88772
	< Bus 001 Device 122: ID 0409:005a NEC Corp. HighSpeed Hub

I have also attached the output of dmesg für this device.

Any clues what I can do to get it work?

Best Regards

	Willi Herzig
---------------------
Making check in src
make[1]: Entering directory `/usr/local/src/libdlo/libdlo-0.1.2/src'
make[1]: Nothing to be done for `check'.
make[1]: Leaving directory `/usr/local/src/libdlo/libdlo-0.1.2/src'
Making check in test
make[1]: Entering directory `/usr/local/src/libdlo/libdlo-0.1.2/test'
make[1]: Nothing to be done for `check'.
make[1]: Leaving directory `/usr/local/src/libdlo/libdlo-0.1.2/test'
make[1]: Entering directory `/usr/local/src/libdlo/libdlo-0.1.2'
make  check-TESTS
make[2]: Entering directory `/usr/local/src/libdlo/libdlo-0.1.2'
test: argv[0]: /usr/local/src/libdlo/libdlo-0.1.2/test/.libs/lt-test1
test: init...

test: basic graphics tests...
test: device info: uid &27148
test: device info: serial 0030-102AB6
test: device info: type  &0
test: native mode info...
  0x0 @ 0 Hz 0 bpp base &0
test: set_mode...
test: error 20 'error sending control message: Broken pipe'
FAIL: test/test1
=======================================
1 of 1 test failed
Please report to libdlo at displaylink.com
=======================================
make[2]: *** [check-TESTS] Error 1
make[2]: Leaving directory `/usr/local/src/libdlo/libdlo-0.1.2'
make[1]: *** [check-am] Error 2
make[1]: Leaving directory `/usr/local/src/libdlo/libdlo-0.1.2'
make: *** [check-recursive] Error 1
---------
output of dmesg:

[9339369.421497] usb 1-1.3.3: new high speed USB device using orion-ehci
and address 127
[9339369.531615] usb 1-1.3.3: New USB device found, idVendor=0409,
idProduct=005a
[9339369.538990] usb 1-1.3.3: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[9339369.549207] usb 1-1.3.3: configuration #1 chosen from 1 choice
[9339369.556844] hub 1-1.3.3:1.0: USB hub found
[9339369.571212] hub 1-1.3.3:1.0: 4 ports detected
[9339369.851366] usb 1-1.3.3.1: new high speed USB device using
orion-ehci and address 2
[9339369.984869] usb 1-1.3.3.1: New USB device found, idVendor=0b95,
idProduct=7720
[9339369.992512] usb 1-1.3.3.1: New USB device strings: Mfr=1,
Product=2, SerialNumber=3
[9339370.000549] usb 1-1.3.3.1: Product: AX88772
[9339370.005105] usb 1-1.3.3.1: Manufacturer: ASIX Elec. Corp.
[9339370.010831] usb 1-1.3.3.1: SerialNumber: 000001
[9339370.019076] usb 1-1.3.3.1: configuration #1 chosen from 1 choice
[9339370.856738] eth1: register 'asix' at usb-orion-ehci.0-1.3.3.1, ASIX
AX88772 USB 2.0 Ethernet, 00:50:b6:40:9e:fd
[9339370.961369] usb 1-1.3.3.2: new high speed USB device using
orion-ehci and address 3
[9339371.093607] usb 1-1.3.3.2: New USB device found, idVendor=17e9,
idProduct=0030
[9339371.101249] usb 1-1.3.3.2: New USB device strings: Mfr=1,
Product=2, SerialNumber=3
[9339371.109303] usb 1-1.3.3.2: Product: USB Display Adapter
[9339371.114928] usb 1-1.3.3.2: Manufacturer: Newnham Research
[9339371.120619] usb 1-1.3.3.2: SerialNumber: 0030-102AB6
[9339371.129050] usb 1-1.3.3.2: configuration #1 chosen from 1 choice
[9339371.221373] usb 1-1.3.3.3: new full speed USB device using
orion-ehci and address 4
[9339371.352610] usb 1-1.3.3.3: New USB device found, idVendor=0d8c,
idProduct=000c
[9339371.360209] usb 1-1.3.3.3: New USB device strings: Mfr=0,
Product=1, SerialNumber=0
[9339371.368288] usb 1-1.3.3.3: Product: C-Media USB Headphone Set
[9339371.377543] usb 1-1.3.3.3: configuration #1 chosen from 1 choice
[9339371.407803] input: C-Media USB Headphone Set   as
/devices/platform/orion-ehci.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3.3/1-1.3.3.3:1.3/input/input7
[9339371.422999] generic-usb 0003:0D8C:000C.0008: input,hidraw1: USB HID
v1.00 Device [C-Media USB Headphone Set  ] on
usb-orion-ehci.0-1.3.3.3/input3
[9339371.531373] usb 1-1.3.3.4: new high speed USB device using
orion-ehci and address 5
[9339371.671616] usb 1-1.3.3.4: New USB device found, idVendor=0409,
idProduct=005a
[9339371.679192] usb 1-1.3.3.4: New USB device strings: Mfr=0,
Product=0, SerialNumber=0
[9339371.689647] usb 1-1.3.3.4: configuration #1 chosen from 1 choice
[9339371.702190] hub 1-1.3.3.4:1.0: USB hub found
[9339371.713988] hub 1-1.3.3.4:1.0: 4 ports detected