Establishing connections to multiple PDPs simultaneously with MBIM

[Neal Gompa]

I'm using a Telit LN930 (Intel XMM7160 based modem). I'd prefer to not use
ModemManager and use mbimcli directly. I'm not exactly sure how to do it,
though. The --connect switch doesn't seem to indicate a way to do it.

On Wed, Aug 5, 2015 at 11:50 AM, Markus Gothe <nietzsche at lysator.liu.se>
wrote:

> Btw what kind of modem are you using?
> You can tunnel AT-commands over MBIM for Huawei as pointed out earlier on
> the list.
>
> //M
>
> Den 5 aug 2015 2:17 em skrev Neal Gompa <ngompa13 at gmail.com>:
> >
> > Hello,
> >
> > Is there a way with mbimcli to use to multiple APNs simultaneously? One
> operator I've used (Verizon Wireless), apparently requires simultaneous
> connection to one APN (vzwims) and another APN (vzwinternet) to enable full
> Internet access (the modem automatically connects to vzwims as it is the
> one that the SIM designates for auto-registration). I've not been able to
> see it work properly with just the vzwinternet APN yet. I did this with a
> different modem that uses NCM/AT commands, but I'd like to know if this is
> possible with MBIM. It didn't appear obvious in ModemManager or mbimcli
> that it was possible.
> >
> > Thanks in advance!
> >
> > --
> > 真実はいつも一つ！/ Always, there's only one truth!
> _______________________________________________
> libmbim-devel mailing list
> libmbim-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/libmbim-devel
>



-- 
真実はいつも一つ！/ Always, there's only one truth!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/libmbim-devel/attachments/20150805/b53e36d3/attachment.html>