[PATCH] mbimcli: report IP configuration on connect

[Dan Williams]

On Mon, 2015-05-04 at 20:21 +0200, Bjørn Mork wrote:
> Looks good, but how do I test it with IPv6?  Cannot figure out how to
> initiate an IPv6 or IPv4v6 connection using mbimcli...

For that, I don't know :)  With a Sierra 7355 (Qualcomm) and T-Mobile
HSPA I automatically get an IPv6 address with --connect.  The patch
outputs the IPv6 details the same way as the IPv4 ones, at least for
this device.  Since we know Telenor supports IPv6, perhaps the device
you've got doesn't support it via MBIM?  Which device is it?

Dan

> Connecting an IPv4v6 APN ends up with an IPv4 only connection:
> 
> nemi:/usr/local/src/git# mbimcli -d /dev/cdc-wdm0 -p --no-close --no-open=4 --connect=telenor.smart
> [/dev/cdc-wdm0] Successfully connected
> 
> [/dev/cdc-wdm0] Connection status:
>               Session ID: '0'
>         Activation state: 'activated'
>         Voice call state: 'none'
>                  IP type: 'ipv4'
>             Context type: 'internet'
>            Network error: 'unknown'
> 
> [/dev/cdc-wdm0] IPv4 configuration available: 'address, gateway, dns'
>      IP [0]: '10.141.70.20/24'
>     Gateway: '10.141.70.1'
>     DNS [0]: '193.213.112.4'
>     DNS [1]: '130.67.15.198'
> 
> [/dev/cdc-wdm0] IPv6 configuration available: 'none'
> [/dev/cdc-wdm0] Session not closed:
>             TRID: '7'
> 
> And attempting an IPv6 only APN results in failure:
> 
> nemi:/usr/local/src/git# mbimcli -d /dev/cdc-wdm0 -p --no-close --no-open=9 --connect=telenor.mobil
> error: operation failed: Failure
> [/dev/cdc-wdm0] Session not closed:
>             TRID: '11'
> 
> 
> 
> Bjørn
> _______________________________________________
> libmbim-devel mailing list
> libmbim-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/libmbim-devel