Sierra Wireless EM7455, MBIM connect

[Fabian Schörghofer]

Thank you for your answer.

I used the following command to connect after connecting the modem to
the USB port:

mbim-network /dev/cdc-wdm0 start

Which yields the following output:

Loading profile...
    APN: drei.at
Querying subscriber ready status 'mbimcli -d /dev/cdc-wdm0
--query-subscriber-ready-status --no-close'...
[/dev/cdc-wdm0] Subscriber ready status retrieved: Ready state:
'initialized' Subscriber ID: '232106606055008' SIM ICCID: 'somenumber'
Ready info: 'unknown' Telephone numbers: (1) '+43660xxxxxxx'
[/dev/cdc-wdm0] Session not closed: TRID: '3'
Saving state... (TRID: 3)
Querying registration state 'mbimcli -d /dev/cdc-wdm0
--query-registration-state --no-open=3 --no-close'...
error: operation failed: Transaction timed out
[/dev/cdc-wdm0] Session not closed: TRID: '4'
Saving state... (TRID: 4)
Attaching to packet service with 'mbimcli -d /dev/cdc-wdm0
--attach-packet-service --no-open=4 --no-close'...
error: operation failed: Transaction timed out
Saving state... (TRID: 5)
Starting network with 'mbimcli -d /dev/cdc-wdm0 --connect=drei.at
--no-open=5 --no-close'...
Network started successfully
Saving state... (TRID: 7)


Then I use mbim-network /dev/cdc-wdm0 status to get the status:

Loading profile...
    APN: drei.at
Loading previous state...
    Previous Transaction ID: 7
Getting status with 'mbimcli -d /dev/cdc-wdm0 --query-connection-state
--no-close --no-open=7'...
error: operation failed: Transaction timed out
Saving state... (TRID: 8)
error: couldn't get connection status

As I get it, with status you get infos like the IP address.

I used the newest version from source:

mbim-network 1.13.0

usb id: Bus 004 Device 005: ID 1199:9071 Sierra Wireless, Inc.

Fabian