ME936 MBIM

[Markus Gothe]

Did a rain check and google came up with this:
https://forum.openwrt.org/viewtopic.php?id=56922&p=2

seems like you are stuck with CDC NCM (which is to prefer in embedded environments where you want an ether layer / MAC-layer).

//M

On 21 Jul 2016, at 15:17 , Sebastian Sjoholm <sebastian.sjoholm at gmail.com> wrote:

> Hi,
> 
> I would like to ask if anyone out there have Huawei ME936 and is running with MBIM on Linux?
> 
> After some deep internet digging it seems that I should be able to activate MBIM mode on the ME936 with following;
> 
> # echo 3 > /sys/bus/usb/drivers/usb/2-1/bConfigurationValue
> -bash: echo: write error: Invalid argument
> #
> 
> But my modem will not accept anything else than '1' which is the default. I am wondering if it can be an firmware issue.
> 
> As it is not easy to know if I have old or new firmware, so if anyone with ME936 can tell if they have different than I have below.
> 
> ati
> Manufacturer: Huawei Technologies Co., Ltd.
> Model: ME936
> Revision: 11.350.20.01.00
> IMEI: 862595020646622
> +GCAP: +CGSM
> 
> OK
> 
> Thanks.
> 
> Regards,
> Sebastian
> _______________________________________________
> libmbim-devel mailing list
> libmbim-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/libmbim-devel

//Markus - The panama-hat hacker

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/libmbim-devel/attachments/20160721/58a3e201/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 186 bytes
Desc: Message signed with OpenPGP using GPGMail
URL: <https://lists.freedesktop.org/archives/libmbim-devel/attachments/20160721/58a3e201/attachment.sig>