-32763.0 dBm
Aleksander Morgado
aleksander at lanedo.com
Thu Sep 27 03:27:38 PDT 2012
> [27 Sep 2012, 11:17:36] [Debug] [/dev/cdc-wdm0] Received message...
>>>>>>> >>>>>> QMUX:
>>>>>>> >>>>>> length = 49
>>>>>>> >>>>>> flags = 0x80
>>>>>>> >>>>>> service = "nas"
>>>>>>> >>>>>> client = 6
>>>>>>> >>>>>> QMI:
>>>>>>> >>>>>> flags = "response"
>>>>>>> >>>>>> transaction = 1
>>>>>>> >>>>>> tlv_length = 37
>>>>>>> >>>>>> message = "Get Signal Strength" (0x0020)
>>>>>>> >>>>>> TLV:
>>>>>>> >>>>>> type = "Result" (0x02)
>>>>>>> >>>>>> length = 4
>>>>>>> >>>>>> value = 00:00:00:00
>>>>>>> >>>>>> translated = SUCCESS
>>>>>>> >>>>>> TLV:
>>>>>>> >>>>>> type = "Signal Strength" (0x01)
>>>>>>> >>>>>> length = 2
>>>>>>> >>>>>> value = A8:05
>>>>>>> >>>>>> translated = [ strength = '-88' radio_interface = '5' ]
>>>>>>> >>>>>> TLV:
>>>>>>> >>>>>> type = "RSSI List" (0x11)
>>>>>>> >>>>>> length = 4
>>>>>>> >>>>>> value = 01:00:58:05
>>>>>>> >>>>>> translated = { [0] = '[ rssi = '88' radio_interface = '5' ] '}
>>>>>>> >>>>>> TLV:
>>>>>>> >>>>>> type = "ECIO List" (0x12)
>>>>>>> >>>>>> length = 4
>>>>>>> >>>>>> value = 01:00:FC:05
>>>>>>> >>>>>> translated = { [0] = '[ ecio = '252' radio_interface = '5' ] '}
>>>>>>> >>>>>> TLV:
>>>>>>> >>>>>> type = "IO" (0x13)
>>>>>>> >>>>>> length = 4
>>>>>>> >>>>>> value = 96:FF:FF:FF
>>>>>>> >>>>>> translated = -106
>>>>>>> >>>>>> TLV:
>>>>>>> >>>>>> type = "SINR" (0x14)
>>>>>>> >>>>>> length = 1
>>>>>>> >>>>>> value = 08
>>>>>>> >>>>>> translated = 8
> [27 Sep 2012, 11:17:36] [Debug] KEY: 01:00:06:03:00:00:00:00
> [27 Sep 2012, 11:17:36] [Debug] Service: 03
> [27 Sep 2012, 11:17:36] [Debug] Client ID: 06
> [27 Sep 2012, 11:17:36] [Debug] Transaction ID: 01:00
> [/dev/cdc-wdm0] Successfully got signal strength
> Current:
> Network 'umts': '-88 dBm'
> RSSI:
> Network 'umts': '-88 dBm'
> ECIO:
> Network 'umts': '-126.0 dBm'
> IO:
> Network 'cdma-1xevdo': '-106 dBm'
> SINR:
> Network 'cdma-1xevdo': (8) '9.0 dB'
> [27 Sep 2012, 11:17:36] [Debug] [/dev/cdc-wdm0] Unregistered 'nas' client with ID '6'
Weird, IO and SINR are supposed to be applicable only for EV-DO. Best I
can do here is to remove the assumed network type from the mmcli output.
Pushed a fix for this already in qmicli.
--
Aleksander
More information about the libqmi-devel
mailing list