Huawei E1732 qmilib supported?

[david preetham]

Hi,
I am trying to connect network connectivity using network interface in
huawei E1732 dongle. I followed two procedures but both are not successful.
on ubuntu 3.10 kernel. Can anybody please suggest me how can i connect
through network interface that is wwan0.

Interface Details: E1732 for network interface
Interface Number: 1
                Name: (none)
                Alternate Number: 0
                Class: 02(comm.)
                Sub Class: 06
                Protocol: ff
                Number of Endpoints: 1

Interface Number: 2
                Name: (none)
                Alternate Number: 0
                Class: 0a(data )
                Sub Class: 00
                Protocol: 00
                Number of Endpoints: 2
1) using qmilib-1.4.0.I tried to configure qmi-network connect using qmicli.
     a)created /etc/qmi-network.conf
               APN=airtelgprs.com
     b)Loading profile...
    APN: airtelgprs.com
    Starting network with 'qmicli -d /dev/cdc-wdm0  --wds-start-   network=
airtelgprs.com  --client-no-release-cid'...
    error: couldn't start network: QMI protocol error (10): 'InvalidProfile'
    Saving state... (CID: 1)
   error: network start failed, no packet data handle
   Clearing state...
   err, wwan0: timed out
   warn, wwan0: using IPV4LL address 169.254.99.182
   root at administrator-OptiPlex-390:~/Desktop/qmi# dhcpcd.sh: interface
wwan0 has been configured with new IP=169.254.99.182

*I loaded qmi_wwan for control and data interface.*

2) sending At commands through /dev/ttyUSB0(option)
    a) AT^NDISDUP=1,1,"airtelgprs.com"
       ok.
    b) AT^DHCP?
       CME ERROR:2

I thought of configuring wwan0 interface with above dhcp response(ip and
netwmask) and run dhcp but not successful*. I loaded cdc_ether for network
interface.*


Regards
david
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/libqmi-devel/attachments/20130807/817ea128/attachment.html>