qmicli: NAS set technology preference at alcatel

[Dan Williams]

On Tue, 2013-01-29 at 18:33 +0100, Thomas Schäfer wrote:
> Am 29.01.2013 18:16, schrieb Dan Williams:
> > I can confirm:
> >
> > AT+SYSSEL=,1,0 -----> the LED indicates 2G/GSM
> > AT+SYSSEL=,2,0 -----> the LED indicates 3G/GSM
> >
> > AT+SYSSEL=,0,0
> > and
> > AT+SYSSEL=,5,0
> >                 -----> LED indicates LTE (my experience)
> >                                indicates net search (docu at manual), but the
> > connection afterwards is also LTE
> > Which device is this again?
> >
> 
> alcatel one touch L100V LTE
> Telekom Speedstick II (in germany)
> 
> ID: 0x1bbb:0x011e

Ah good they actually are TCT/Alcatel devices.  I guess somehow the
alcatel plugin grows the capability to do QMI bearers and everything
else, but then overrides the preferred mode setting using AT commands.

One interesting question though:  does the device have a DIAG/QCDM port?
If so, can you run test-qcdm --port /dev/ttyUSBx and let me know what
the "mode preference" is for each of these?  I'm curious if that follows
the AT commands, which it most often does on Qualcomm devices.

Dan