qmicli: NAS set technology preference at alcatel

Thu Jan 31 12:15:47 PST 2013

Am Dienstag, 29. Januar 2013, 12:38:15 schrieb Dan Williams:

> > 
> > alcatel one touch L100V LTE
> > Telekom Speedstick II (in germany)
> > 
> > ID: 0x1bbb:0x011e
> 
> Ah good they actually are TCT/Alcatel devices.  I guess somehow the
> alcatel plugin grows the capability to do QMI bearers and everything
> else, but then overrides the preferred mode setting using AT commands.
> 
> One interesting question though:  does the device have a DIAG/QCDM port?
> If so, can you run test-qcdm --port /dev/ttyUSBx and let me know what
> the "mode preference" is for each of these?  I'm curious if that follows
> the AT commands, which it most often does on Qualcomm devices.
>

-------------- next part --------------
hpmini:/home/thomas/mm/ModemManager-20130131/libqcdm/tests # ./test-qcdm --port /dev/ttyUSB0
/test_crc16_1: OK
/test_crc16_2: OK
/test_escape1: OK
/test_escape2: OK
/test_escape_unescape: OK
/test_utils_decapsulate_buffer: OK
/test_utils_encapsulate_buffer: OK
/test_utils_decapsulate_sierra_cns: OK
/test_result_string: OK
/test_result_uint32: OK
/test_result_uint8: OK
/test_result_uint8_array: OK
/test_com_port_init: OK
/test_com_version_info: 
** Message: test_com_version_info: Compiled Date: Oct 19 2012
** Message: test_com_version_info: Compiled Time: 10:51:10
** Message: test_com_version_info: Release Date: Sep 24 2012
** Message: test_com_version_info: Release Time: 22:00:00
** Message: test_com_version_info: Model: SCAQWBZM
OK
/test_com_esn: 
** Message: test_com_esn: ESN: deadd00d
OK
/test_com_mdn: OK
/test_com_read_roam_pref: 
** Message: test_com_read_roam_pref: Roam preference: 0xFF (automatic)
OK
/test_com_read_mode_pref: 
** Message: test_com_read_mode_pref: Mode preference: 0x0E (UMTS only)
OK
/test_com_read_hybrid_pref: OK
/test_com_read_hdr_rev_pref: OK
/test_com_status: OK
/test_com_sw_version: OK
/test_com_status_snapshot: OK
/test_com_pilot_sets: OK
/test_com_cm_subsys_state_info: 
** Message: test_com_cm_subsys_state_info: Call State: 0 (idle)
** Message: test_com_cm_subsys_state_info: Operating Mode: 5 (online)
** Message: test_com_cm_subsys_state_info: System Mode: 5 (WCDMA)
** Message: test_com_cm_subsys_state_info: Mode Preference: 0x0E (WCDMA only)
** Message: test_com_cm_subsys_state_info: Band Preference: 24642432
** Message: test_com_cm_subsys_state_info: Roam Preference: 0xFF (automatic)
** Message: test_com_cm_subsys_state_info: Service Domain Preference: 2
** Message: test_com_cm_subsys_state_info: Acquisition Order Preference: 0
** Message: test_com_cm_subsys_state_info: Hybrid Preference: 0
** Message: test_com_cm_subsys_state_info: Network Selection Preference: 1
OK
/test_com_hdr_subsys_state_info: 
** Message: test_com_hdr_subsys_state_info: device does not implement the HDR subsystem
OK
/test_com_ext_logmask: 
** Message: test_com_ext_logmask: Max # Log Items: 1370 (0x55A)

OK
/test_com_event_report: 
OK
/test_com_log_config: 
** Message: test_com_log_config: Num Log Items: 1369 (0x559)
** Message: test_com_log_config:    Enabled: 0x1029
** Message: test_com_log_config:    Enabled: 0x102b


OK
/test_com_zte_subsys_status: 
** Message: test_com_zte_subsys_status: device does not implement the ZTE subsystem
OK
/test_com_nw_subsys_modem_snapshot_cdma: 
OK
/test_com_wcdma_subsys_state_info: 
** Message: test_com_wcdma_subsys_state_info: IMEI: 861170000416999
** Message: test_com_wcdma_subsys_state_info: IMSI: 262020429000213
** Message: test_com_wcdma_subsys_state_info: L1 state: 8 (Deactivated)
OK
/test_com_gsm_subsys_state_info: 
** Message: test_com_gsm_subsys_state_info: IMEI: 861170000416999
** Message: test_com_gsm_subsys_state_info: IMSI: 262020429000213
** Message: test_com_gsm_subsys_state_info: MCC: 0
** Message: test_com_gsm_subsys_state_info: MNC: 0
** Message: test_com_gsm_subsys_state_info: LAC: 0x0000
** Message: test_com_gsm_subsys_state_info: Cell ID: 0x0000
** Message: test_com_gsm_subsys_state_info: CM Call State: 0 (idle)
** Message: test_com_gsm_subsys_state_info: CM Opmode: 5 (online)
** Message: test_com_gsm_subsys_state_info: CM Sysmode: 5 (WCDMA)


----------------------------------------------------------
hpmini:/home/thomas/mm/ModemManager-20130131/libqcdm/tests # ./test-qcdm --port /dev/ttyUSB1
/test_crc16_1: OK
/test_crc16_2: OK
/test_escape1: OK
/test_escape2: OK
/test_escape_unescape: OK
/test_utils_decapsulate_buffer: OK
/test_utils_encapsulate_buffer: OK
/test_utils_decapsulate_sierra_cns: OK
/test_result_string: OK
/test_result_uint32: OK
/test_result_uint8: OK
/test_result_uint8_array: OK
/test_com_port_init: OK
/test_com_version_info: **
ERROR:test-qcdm-com.c:412:test_com_version_info: assertion failed: (result)
Abgebrochen

--------------------------------------------------------------

hpmini:/home/thomas/mm/ModemManager-20130131/libqcdm/tests # LANG=C ./test-qcdm --port /dev/ttyUSB2
/test_crc16_1: OK
/test_crc16_2: OK
/test_escape1: OK
/test_escape2: OK
/test_escape_unescape: OK
/test_utils_decapsulate_buffer: OK
/test_utils_encapsulate_buffer: OK
/test_utils_decapsulate_sierra_cns: OK
/test_result_string: OK
/test_result_uint32: OK
/test_result_uint8: OK
/test_result_uint8_array: OK
/test_com_port_init: OK
/test_com_version_info: **
ERROR:test-qcdm-com.c:412:test_com_version_info: assertion failed: (result)
Abgebrochen
hpmini:/home/thomas/mm/ModemManager-20130131/libqcdm/tests

hpmini:/home/thomas/mm/ModemManager-20130131/libqcdm/tests # export LC_ALL=POSIX
hpmini:/home/thomas/mm/ModemManager-20130131/libqcdm/tests # locale
LANG=de_DE.UTF-8
LC_CTYPE="POSIX"
LC_NUMERIC="POSIX"
LC_TIME="POSIX"
LC_COLLATE="POSIX"
LC_MONETARY="POSIX"
LC_MESSAGES="POSIX"
LC_PAPER="POSIX"
LC_NAME="POSIX"
LC_ADDRESS="POSIX"
LC_TELEPHONE="POSIX"
LC_MEASUREMENT="POSIX"
LC_IDENTIFICATION="POSIX"
LC_ALL=POSIX
hpmini:/home/thomas/mm/ModemManager-20130131/libqcdm/tests # ./test-qcdm --port /dev/ttyUSB1
/test_crc16_1: OK
/test_crc16_2: OK
/test_escape1: OK
/test_escape2: OK
/test_escape_unescape: OK
/test_utils_decapsulate_buffer: OK
/test_utils_encapsulate_buffer: OK
/test_utils_decapsulate_sierra_cns: OK
/test_result_string: OK
/test_result_uint32: OK
/test_result_uint8: OK
/test_result_uint8_array: OK
/test_com_port_init: OK
/test_com_version_info: **
ERROR:test-qcdm-com.c:412:test_com_version_info: assertion failed: (result)
Aborted
hpmini:/home/thomas/mm/ModemManager-20130131/libqcdm/tests # ./test-qcdm --port /dev/ttyUSB2
/test_crc16_1: OK
/test_crc16_2: OK
/test_escape1: OK
/test_escape2: OK
/test_escape_unescape: OK
/test_utils_decapsulate_buffer: OK
/test_utils_encapsulate_buffer: OK
/test_utils_decapsulate_sierra_cns: OK
/test_result_string: OK
/test_result_uint32: OK
/test_result_uint8: OK
/test_result_uint8_array: OK
/test_com_port_init: OK
/test_com_version_info: **
ERROR:test-qcdm-com.c:412:test_com_version_info: assertion failed: (result)
Aborted