QMI does not work with 3.10
Simone Ferlin-Oliveira
ferlin at simula.no
Thu Jul 25 11:32:54 PDT 2013
Hi,
I know fixed one of the problems and can see /deb/cdc_wdm0 although I have
more than one modem o the same type - huawei E353 - I see only one cdc_wdm.
How can one check whether the modem is QMI-enabled (at^SETPORT?) and/or
verify it?
On Thursday, July 25, 2013, Simone Ferlin-Oliveira wrote:
> Hi,
>
> I am using Huawei E353 and trying to enable QMI on these modems, although
> I can connect to the provider, nothing happens under /dev/...
>
> Is there something missing?
>
> My output:
>
> lsmod:
> Module Size Used by
> qmi_wwan 7982 0
> cdc_ncm 13942 0
> cdc_ether 6658 0
> usbnet 28671 3 qmi_wwan,cdc_ncm,cdc_ether ***
> ppp_async 7571 1
> ppp_generic 24492 5 ppp_async
> slhc 5236 1 ppp_generic
> option 21303 2
> usb_wwan 9753 1 option
> usbserial 34260 5 option,usb_wwan
> ***qmi_wwan, cdc_ncm and cdc_ether were loaded with modprobe statically
>
> lsusb and/or usb-modeswitch:
> Bus 001 Device 002: ID 1a40:0201 Terminus Technology Inc. FE 2.1 7-port Hub
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 001 Device 003: ID 12d1:1506 Huawei Technologies Co., Ltd. E398
> LTE/UMTS/GSM Modem/Networkcard
>
> uname -a
> Linux xxx 3.10.0norarm-gad89ba6-dirty #1 PREEMPT
>
> ls -lh /dev/:
> lrwxrwxrwx 1 root root 9 Jan 1 1970 MAKEDEV -> /bin/true
> crw------T 1 root root 10, 134 Jan 1 1970 apm_bios
> drwxr-xr-x 2 root root 600 Jan 1 1970 block
> drwxr-xr-x 3 root root 60 Jan 1 1970 bus
> drwxr-xr-x 2 root root 2.9K Jan 1 1970 char
> crw------- 1 root root 5, 1 Jan 1 1970 console
> crw------T 1 root root 10, 63 Jan 1 1970 cpu_dma_latency
> drwxr-xr-x 6 root root 120 Jan 1 1970 disk
> lrwxrwxrwx 1 root root 13 Jan 1 1970 fd -> /proc/self/fd
> crw-rw-rwT 1 root root 1, 7 Jan 1 1970 full
> lrwxrwxrwx 1 root root 7 Jan 1 1970 gsmmodem -> ttyUSB0
> crw-r----T 1 root kmem 1, 2 Jan 1 1970 kmem
> crw-r--r-T 1 root root 1, 11 Jan 1 1970 kmsg
> (...)
>
> and /var/log/syslog:
> Jul 25 14:38:53 localhost kernel: [ 7323.515513] qmi_wwan: Unknown symbol
> usbnet_change_mtu (err 0)
> Jul 25 14:38:53 localhost kernel: [ 7323.515602] qmi_wwan: Unknown symbol
> usbnet_open (err 0)
> Jul 25 14:38:53 localhost kernel: [ 7323.515668] qmi_wwan: Unknown symbol
> usbnet_get_ethernet_addr (err 0)
> Jul 25 14:38:53 localhost kernel: [ 7323.515741] qmi_wwan: Unknown symbol
> usbnet_tx_timeout (err 0)
> Jul 25 14:38:53 localhost kernel: [ 7323.516576] qmi_wwan: Unknown symbol
> usbnet_suspend (err 0)
> Jul 25 14:38:53 localhost kernel: [ 7323.528748] qmi_wwan: Unknown symbol
> usbnet_start_xmit (err 0)
> Jul 25 14:38:53 localhost kernel: [ 7323.528826] qmi_wwan: Unknown symbol
> usbnet_get_endpoints (err 0)
> Jul 25 14:38:53 localhost kernel: [ 7323.538545] qmi_wwan: Unknown symbol
> usbnet_stop (err 0)
> Jul 25 14:38:53 localhost kernel: [ 7323.539280] qmi_wwan: Unknown symbol
> usbnet_disconnect (err 0)
> Jul 25 14:38:53 localhost kernel: [ 7323.545411] qmi_wwan: Unknown symbol
> usbnet_probe (err 0)
> Jul 25 14:38:53 localhost kernel: [ 7323.550667] qmi_wwan: Unknown symbol
> usbnet_resume (err 0)
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/libqmi-devel/attachments/20130725/fc9aa733/attachment.html>
More information about the libqmi-devel
mailing list