MC7710 enable GPS
Dan Williams
dcbw at redhat.com
Mon Nov 25 09:13:24 PST 2013
On Mon, 2013-11-25 at 18:44 +0400, Danilo Magat wrote:
> Hi guys,
>
> i am not sure if this the right place to post and ask a question with
> regards to the subject.
> i am trying to look for a solution on how can i enable the GPS on my sierra
> MC7710.
> my OS is OPENWRT ive successfully configure the WWAN to connect on the
> internet using
If your 7710 is QMI-enabled, I'd use ModemManager or libqmi.
If your 7710 is using DirectIP firmware, then you have to follow the
directions in the "GPS Enabling and Disabling" section here:
http://whirlpool.net.au/wiki/sierra_advanced
Dan
> config interface 'wan'
> option ifname 'wwan0'
> option proto 'dhcp'
>
> wwan0 Link encap:Ethernet HWaddr 12:F4:A5:C0:01:01
> inet addr:10.216.178.223 Bcast:10.216.178.255 Mask:255.255.255.0
> UP BROADCAST RUNNING NOARP MULTICAST MTU:1500 Metric:1
> RX packets:4748 errors:0 dropped:0 overruns:0 frame:0
> TX packets:3023 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:670227 (654.5 KiB) TX bytes:302146 (295.0 KiB)
>
> and i would like to know how can get the GPS or enable or get my current
> location.
>
> #lsmod
> Module Size Used by Tainted: G
> sierra 5816 0
> qcserial 3544 0
> pl2303 9080 0
> option 14744 0
> sierra_net 5176 0
> usb_wwan 5368 2 qcserial,option
> usbserial 21544 5 sierra,qcserial,pl2303,option,usb_wwan
> usbnet 10012 1 sierra_net
>
> T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
> D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=1199 ProdID=68a3 Rev= 0.06
> S: Manufacturer=Sierra Wireless, Incorporated
> S: Product=MC7710
> S: SerialNumber=358178041055833
> C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr= 0mA
> I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=sierra
> E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=sierra
> E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
> I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=sierra
> E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
> I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=sierra
> E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
> E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
> I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=sierra
> E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
> E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
> I:* If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=sierra_net
> E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
> E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
>
>
> Thanks in advance.
>
>
> _______________________________________________
> libqmi-devel mailing list
> libqmi-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/libqmi-devel
More information about the libqmi-devel
mailing list