Verizon UML295

[Markus Gothe]

The HID devices are wrapped up in mystery... They are really HID-devices for reason unknown.

//M

Den 2 sep 2014 08:01 skrev =?ISO-8859-1?Q?Bj=F8rn_Mork?= <bjorn at mork.no>:
>
> Markus Gothe <nietzsche at lysator.liu.se> writes:
>
> > Still not sure how to use it since this is how it will enumerate it self:
> > [  297.876567] usb 1-1: new high-speed USB device number 2 using ehci-pci
> > [  298.010745] usb 1-1: New USB device found, idVendor=10a9, idProduct=6064
> > [  298.010748] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> > [  298.010750] usb 1-1: Product: PANTECH UML295
> > [  298.010753] usb 1-1: Manufacturer: Pantech, Incorporated
> > [  298.010754] usb 1-1: SerialNumber: UML295591906098
> > [  298.697748] cdc_ether 1-1:1.0 eth1: register 'cdc_ether' at usb-0000:00:1d.7-1, CDC Ethernet Device, d0:57:85:74:4b:c9
> > [  298.697843] usbcore: registered new interface driver cdc_ether
>
> Could still be a QMI function using CDC ECM class codes, like
> e.g. Novatel does it. Try manually unbinding from cdc_ether and then
> bind to qmi_wwan so you can test qmicli against it.  I.e.
>
> echo "1-1:1.0" >/sys/bus/usb/drivers/cdc_ether/unbind
> modprobe qmi_wwan
> echo "10a9 6064" >/sys/bus/usb/drivers/qmi_wwan/new_id
>
> > [  298.765996] hidraw: raw HID events driver (C) Jiri Kosina
> > [  298.850160] usbcore: registered new interface driver usbhid
> > [  298.850162] usbhid: USB HID core driver
> > [  299.171355] hid-generic 0003:10A9:6064.0001: hiddev0,hidraw0: USB HID v2.00 Device [Pantech, Incorporated PANTECH UML295] on usb-0000:00:1d.7-1/input2
> > [  299.172067] hid-generic 0003:10A9:6064.0002: hiddev0,hidraw1: USB HID v2.00 Device [Pantech, Incorporated PANTECH UML295] on usb-0000:00:1d.7-1/input3
>
> I assume this HID device is just there for further mode switching?  Or
> maybe it's used for more than that?
>
> Bjørn
> _______________________________________________
> libqmi-devel mailing list
> libqmi-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/libqmi-devel