Is Huawei E3372S-153 supported by qmi wwan ?
Gopakumar Choorakkot Edakkunni
gopakumar.c.e at gmail.com
Thu Jul 16 00:13:01 PDT 2015
Thanks Markus. Its most certainly the HiSilicon chipset ! But I read
in some forums that we can still get it working as a serial/ppp modem
- is there any "magic" commands etc.. to be sent over ttyUSB<N> before
the modem can work using the option driver dialling ppp ?
Rgds,
Gopa.
On Wed, Jul 15, 2015 at 2:04 PM, Markus Gothe <nietzsche at lysator.liu.se> wrote:
> AFAIK all E3372 variants are HiSilicon Balong.
>
> If you are lucky they run CDC NCM.
>
> //M
>
> On 15 Jul 2015, at 23:03 , Gopakumar Choorakkot Edakkunni <gopakumar.c.e at gmail.com> wrote:
>
>> Ah .. why do I always start way back in time searching for discussion
>> threads :). Thanks Markus, I will see if it can be inserted into a
>> windows machine to find what its chipset it.
>>
>> Rgds,
>> Gopa.
>>
>> On Wed, Jul 15, 2015 at 1:48 PM, Markus Gothe <nietzsche at lysator.liu.se> wrote:
>>> I was referring to yesterdays discussion: http://lists.freedesktop.org/archives/libqmi-devel/2015-July/001219.html
>>>
>>> //M
>>>
>>> On 15 Jul 2015, at 22:40 , Gopakumar Choorakkot Edakkunni <gopakumar.c.e at gmail.com> wrote:
>>>
>>>> Thanks for the pointer Markus. So I guess you were referring to the
>>>> discussion http://lists.freedesktop.org/archives/modemmanager-devel/2014-September/001496.html
>>>> ? That thread seems to be talking about issues with dhcp/arp *after*
>>>> the modem was recognized as a qmi device, no wwan0 get created .. I
>>>> initially suspected mode-switch and tried punching a couple of
>>>> different "messages" that I found in different forums into the "msg"
>>>> field of the modeswitch file (openwrt version, listed below) - but all
>>>> of no avail, it just doesnt get recognized by qmi, no wwan0 !
>>>>
>>>> "12d1:1505": {
>>>> "*": {
>>>> "t_vendor": 4817,
>>>> "t_product": [ 5131, 5132, 5382, 5391, 5386 ],
>>>> "mode": "HuaweiNew",
>>>> "msg": [ ]
>>>> }
>>>> },
>>>>
>>>> Rgds,
>>>> Gopa.
>>>>
>>>> On Wed, Jul 15, 2015 at 11:15 AM, Markus Gothe <nietzsche at lysator.liu.se> wrote:
>>>>> See previous discussion on E3272.
>>>>>
>>>>> //M
>>>>> On 15 Jul 2015, at 20:14 , Gopakumar Choorakkot Edakkunni <gopakumar.c.e at gmail.com> wrote:
>>>>>
>>>>>> usb_modeswitch converts it into 12d1:1506 - but it still seems to go
>>>>>> with the option driver (as shown in the dmesg log below). But is it
>>>>>> really unsupported by qmi ?
>>>>>>
>>>>>> [ 10.109524] usbserial: USB Serial support registered for GSM modem (1-port)
>>>>>> [ 10.117013] option 1-1.4:1.0: GSM modem (1-port) converter detected
>>>>>> [ 10.123668] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB0
>>>>>> [ 10.130869] option 1-1.4:1.1: GSM modem (1-port) converter detected
>>>>>> [ 10.137530] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB1
>>>>>> [ 10.145757] PPP generic driver version 2.4.2
>>>>>> [ 10.150836] NET: Registered protocol family 24
>>>>>> [ 10.155904] usbcore: registered new interface driver qcserial
>>>>>> [ 10.161836] usbserial: USB Serial support registered for Qualcomm USB modem
>>>>>> [ 10.169713] usbcore: registered new interface driver qmi_wwan
>>>>>> [ 10.176482] usbcore: registered new interface driver rndis_host
>>>>>> [ 10.183360] usbcore: registered new interface driver sierra_net
>>>>>>
>>>>>> Rgds,
>>>>>> Gopa.
>>>>>> _______________________________________________
>>>>>> libqmi-devel mailing list
>>>>>> libqmi-devel at lists.freedesktop.org
>>>>>> http://lists.freedesktop.org/mailman/listinfo/libqmi-devel
>>>>>
>>>>> //Markus - The panama-hat hacker
>>>>>
>>>> _______________________________________________
>>>> libqmi-devel mailing list
>>>> libqmi-devel at lists.freedesktop.org
>>>> http://lists.freedesktop.org/mailman/listinfo/libqmi-devel
>>>
>>> //Markus - The panama-hat hacker
>>>
>> _______________________________________________
>> libqmi-devel mailing list
>> libqmi-devel at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/libqmi-devel
>
> //Markus - The panama-hat hacker
>
More information about the libqmi-devel
mailing list