Autoconnect through QMI

Kasper Holtze kasper at
Mon Dec 5 11:54:00 UTC 2016

On 12/05/2016 12:19 PM, Aleksander Morgado wrote:
> On Mon, Dec 5, 2016 at 11:34 AM, Kasper Holtze <kasper at> wrote:
>> Using AT commands with Sierra MC7710, we can set a PDP using
>> +CGDCONT=x,"IP","apn". By setting SCPROF=x, ... we can tell the modem to
>> automatically connect a PDP when the modem boots.
>> We now switched to MC7304, and QMI. How do archieve the same using
>> libqmi/qmicli? To make the modem automatically connect on boot, without any
>> interaction (besides sending PIN code to the modem).
> Try to use these qmicli commands to get/set the settings:
>    --wds-get-autoconnect-settings  Get autoconnect settings
> and:
>    --wds-set-autoconnect-settings=[(enabled|disabled|paused)[,(roaming-allowed|home-only)]]
>      Set autoconnect settings (roaming settings optional)
Thank you - that enables autoconnect. But how to set the 
APN/username/password in the modem? Will the settings used with 
wds-start-network be persistent over reboots of the modem? I guess it 
has to do with the profiles which can be fetched with 

More information about the libqmi-devel mailing list