Point to Point interface over qmi_wwan device
Dan Williams
dcbw at redhat.com
Wed Oct 5 20:36:44 UTC 2016
On Wed, 2016-10-05 at 19:23 +0000, Tang Nguyen wrote:
> --------------------------------------------
> On Wed, 10/5/16, Bjørn Mork <bjorn at mork.no> wrote:
>
> Subject: Re: Point to Point interface over qmi_wwan device
> To: "Tang Nguyen" <tang_nguyen at yahoo.com>
> Cc: "Dan Williams" <dcbw at redhat.com>, "Reinhard Speyerer" <rspmn at arc
> or.de>, "libqmi (development)" <libqmi-devel at lists.freedesktop.org>
> Date: Wednesday, October 5, 2016, 9:26 AM
>
> Tang Nguyen <tang_nguyen at yahoo.com>
> writes:
>
> > I try to use
> --set-expected-data-format=raw-ip command, but I got error
> message of non-existence
> "'/sys/class/net/wwan-6-1.ip/qmi/raw_ip'
> file.
> > I found Bjon's patch : https://patchwork.ozlabs.org/patch/552408/
> from patchwork regarding about raw-ip support in
> qmi_wwan driver.
> > Is this patch
> already available in upstream kernel , or it will happen
> soon ?
>
> >It's in Linux
> >v4.5 and later.
>
>
> >Bjørn
>
> Applying cleanly Bjon's patch to kernel 3.14.68, I can set raw-ip
> data format, but not able to make a connection. Do i need to apply
> another patch to get it work.
These logs say that the device refused to set raw-ip through the CTL
service request. Can you try the WDA method instead? IIRC newer
devices don't do this through CTL anymore.
qmicli -d /dev/cdc-wdm0 --wda-set-data-format=raw-ip
qmicli -d /dev/cdc-wdm0 --set-expected-data-format=raw-ip
then try to connect.
Dan
> [05 Oct 2016, 14:06:07] [Debug] [/dev/cdc-wdm0] Opening device with
> flags 'sync, net-raw-ip, net-no-qos-header'...
> [05 Oct 2016, 14:06:07] [Debug] [/dev/cdc-wdm0] Running sync...
> [05 Oct 2016, 14:06:07] [Debug] [/dev/cdc-wdm0] Sent message...
> <<<<<< RAW:
> <<<<<< length = 12
> <<<<<< data = 01:0B:00:00:00:00:00:01:27:00:00:00
>
> [05 Oct 2016, 14:06:07] [Debug] [/dev/cdc-wdm0] Sent message
> (translated)...
> <<<<<< QMUX:
> <<<<<< length = 11
> <<<<<< flags = 0x00
> <<<<<< service = "ctl"
> <<<<<< client = 0
> <<<<<< QMI:
> <<<<<< flags = "none"
> <<<<<< transaction = 1
> <<<<<< tlv_length = 0
> <<<<<< message = "Sync" (0x0027)
>
> [05 Oct 2016, 14:06:07] [Debug] [/dev/cdc-wdm0] Received message...
> >
> > >
> > > >
> > > > >
> > > > > >
> > > > > > >
> > > > > > > RAW:
> > > > > > > length = 19
> > > > > > > data =
> > > > > > > 01:12:00:80:00:00:01:01:27:00:07:00:02:04:00:00:00:00:00
>
> [05 Oct 2016, 14:06:07] [Debug] [/dev/cdc-wdm0] Received message
> (translated)...
> >
> > >
> > > >
> > > > >
> > > > > >
> > > > > > >
> > > > > > > QMUX:
> > > > > > > length = 18
> > > > > > > flags = 0x80
> > > > > > > service = "ctl"
> > > > > > > client = 0
> > > > > > > QMI:
> > > > > > > flags = "response"
> > > > > > > transaction = 1
> > > > > > > tlv_length = 7
> > > > > > > message = "Sync" (0x0027)
> > > > > > > TLV:
> > > > > > > type = "Result" (0x02)
> > > > > > > length = 4
> > > > > > > value = 00:00:00:00
> > > > > > > translated = SUCCESS
>
> [05 Oct 2016, 14:06:07] [Debug] [/dev/cdc-wdm0] Sync operation
> finished
> [05 Oct 2016, 14:06:07] [Debug] [/dev/cdc-wdm0] Setting network port
> data format...
> [05 Oct 2016, 14:06:07] [Debug] [/dev/cdc-wdm0] Sent message...
> <<<<<< RAW:
> <<<<<< length = 21
> <<<<<< data =
> 01:14:00:00:00:00:00:02:26:00:09:00:10:02:00:02:00:01:01:00:00
>
> [05 Oct 2016, 14:06:07] [Debug] [/dev/cdc-wdm0] Sent message
> (translated)...
> <<<<<< QMUX:
> <<<<<< length = 20
> <<<<<< flags = 0x00
> <<<<<< service = "ctl"
> <<<<<< client = 0
> <<<<<< QMI:
> <<<<<< flags = "none"
> <<<<<< transaction = 2
> <<<<<< tlv_length = 9
> <<<<<< message = "Set Data Format" (0x0026)
> <<<<<< TLV:
> <<<<<< type = "Protocol" (0x10)
> <<<<<< length = 2
> <<<<<< value = 02:00
> <<<<<< translated = raw-ip
> <<<<<< TLV:
> <<<<<< type = "Format" (0x01)
> <<<<<< length = 1
> <<<<<< value = 00
> <<<<<< translated = absent
>
> [05 Oct 2016, 14:06:07] [Debug] [/dev/cdc-wdm0] Received message...
> >
> > >
> > > >
> > > > >
> > > > > >
> > > > > > >
> > > > > > > RAW:
> > > > > > > length = 19
> > > > > > > data =
> > > > > > > 01:12:00:80:00:00:01:02:26:00:07:00:02:04:00:01:00:46:00
>
> [05 Oct 2016, 14:06:07] [Debug] [/dev/cdc-wdm0] Received message
> (translated)...
> >
> > >
> > > >
> > > > >
> > > > > >
> > > > > > >
> > > > > > > QMUX:
> > > > > > > length = 18
> > > > > > > flags = 0x80
> > > > > > > service = "ctl"
> > > > > > > client = 0
> > > > > > > QMI:
> > > > > > > flags = "response"
> > > > > > > transaction = 2
> > > > > > > tlv_length = 7
> > > > > > > message = "Set Data Format" (0x0026)
> > > > > > > TLV:
> > > > > > > type = "Result" (0x02)
> > > > > > > length = 4
> > > > > > > value = 01:00:46:00
> > > > > > > translated = FAILURE: InvalidOperation
> _______________________________________________
> libqmi-devel mailing list
> libqmi-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/libqmi-devel
More information about the libqmi-devel
mailing list