Sierra MC7455 problems

[Bjørn Mork]

heni wael <waelheni91 at gmail.com> writes:

> Thanks for your response
>
> Now the connection work and i got this
>
> [root at mc7455-1-qpcs-local ~]# qmicli -d /dev/cdc-wdm0
> --wds-get-current-settings
> [/dev/cdc-wdm0] Current settings retrieved:
>            IP Family: IPv4
>         IPv4 address: 166.164.108.XXX
>     IPv4 subnet mask: 255.255.255.248
> IPv4 gateway address: 166.164.108.XXX
>     IPv4 primary DNS: 198.224.173.XXX
>   IPv4 secondary DNS: 198.224.174.XXX
>                  MTU: 1428
>              Domains: none
>
>
> Still the interface configuration
> [root at mc7455-1-qpcs-local ~]# ifconfig wwp0s20u8u2i8
> wwp0s20u8u2i8: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST>  mtu 1500
>         unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  txqueuelen
> 1000  (UNSPEC)
>         RX packets 732  bytes 43460 (42.4 KiB)
>         RX errors 0  dropped 0  overruns 0  frame 0
>         TX packets 0  bytes 0 (0.0 B)
>         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
>
> Have you got any suggestion
> i configure it by hand or there is another kind of dhcp client

You can configure it by hand, or script, based on the qmicli output.  Or
you can use a DHCP client which works on non-ethernet interfaces.  I
believe the busybox udhcpc client should work.



Bjørn