MC7455 PROBLEM
heni wael
waelheni91 at gmail.com
Wed Jan 18 07:40:14 UTC 2017
Ok Tang
thanks for Help
2017-01-17 22:46 GMT+01:00 Tang Nguyen <tang_nguyen at yahoo.com>:
> Module allow you configuring more than one profile - let's try this:
>
> 1. Create profile 1 with AT command
> AT+CGDCONT=1,"IPV4V6","vzwims","0.0.0.0",0,0,0,0
>
> 2. Create profile #3
> AT+CGDCONT=3,"IP","xxxx. vzwstatic","0.0.0.0",0,0,0,0
>
> Reset modem, and reboot your system.
>
> 2. Check modem registration status with AT command
> AT+CGCONTRDP
>
> Expect modem reports bearer information, including IP address
>
> If you don't see IP address from AT+CGCONTRDP command - Don't bother step
> 3 below - waiting until modem got IP address for profile #1.
>
>
> 3. Try to connect with qmicli commands
>
> qmicli -d /dev/cdc-wdm0 --wda-get-data-format -v
>
> qmicli -d /dev/cdc-wdm0 --set-expected-data-format=raw -ip -v
> qmicli -d /dev/cdc-wdm0 --wds-start-network="apn=xxxx.
> vzwstatic,ip-type=4" --device-open-net="net-raw-ip| net-no-qos-header"
> --device-open-sync --client-no-release-cid -v
>
>
>
> I did try above steps on MC73xx with libqmi v. 16.2, and it works fine for
> me. Of course, there is a difference between your modem (MC74xx) and mine
> (MC73xx) - but I think the steps shouldn't be different.
>
> Cheers,
> -tang
>
>
>
>
>
>
> --------------------------------------------
> On Tue, 1/17/17, heni wael <waelheni91 at gmail.com> wrote:
>
> Subject: Re: MC7455 PROBLEM
> To: libqmi-devel at lists.freedesktop.org
> Date: Tuesday, January 17, 2017, 3:36 PM
>
> I have
> this also
>
> AT+CGDCONT=?
>
>
> +CGDCONT:
> (1-24),"IP",,,(0-2),(0-4),(0-1),(0-1)
>
> +CGDCONT:
> (1-24),"PPP",,,(0-2),(0-4),(0-1),(0-1)
>
> +CGDCONT:
> (1-24),"IPV6",,,(0-2),(0-4),(0-1),(0-1)
> +CGDCONT:
> (1-24),"IPV4V6",,,(0-2),(0-4),(0-1),(0-1)
>
>
> OK
>
>
>
> 2017-01-17 21:24 GMT+01:00
> heni wael <waelheni91 at gmail.com>:
> Thanks for reply
> It work for a few day and then it
> give this errors
> i got this :
>
> AT+CGDCONT?
>
> +CGDCONT:
> 1,"IP","xxxx.vzwstatic","0.0.
> 0.0",0,0,0,0
>
>
> OK
>
>
> and this
>
> [root at mc7455-1-qpcs-local ~]#
> qmicli -d /dev/cdc-wdm0 --wds-start-network="apn=xxxx.
> vzwstatic,ip-type=4"
> --device-open-net="net-raw-ip| net-no-qos-header"
> --device-open-sync --client-no-release-cid -v
> [17 ينا 2017, 15:19:27] [Debug]
> [/dev/cdc-wdm0] Opening device with flags 'sync,
> net-raw-ip, net-no-qos-header'...
> [17
> ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Running
> sync...
> [17 ينا 2017, 15:19:27] [Debug]
> [/dev/cdc-wdm0] Sent message...
> <<<<<< RAW:
> <<<<<< length = 12
> <<<<<< data =
> 01:0B:00:00:00:00:00:01:27:00: 00:00
>
> [17 ينا 2017, 15:19:27] [Debug]
> [/dev/cdc-wdm0] Sent message (translated)...
> <<<<<< QMUX:
> <<<<<< length = 11
> <<<<<< flags =
> 0x00
> <<<<<< service =
> "ctl"
> <<<<<<
> client = 0
> <<<<<<
> QMI:
> <<<<<<
> flags = "none"
> <<<<<< transaction = 1
> <<<<<< tlv_length =
> 0
> <<<<<<
> message = "Sync" (0x0027)
>
> [17 ينا 2017, 15:19:27]
> [Debug] [/dev/cdc-wdm0] Received message...
> >>>>>> RAW:
> >>>>>> length = 19
> >>>>>> data =
> 01:12:00:80:00:00:01:01:27:00: 07:00:02:04:00:00:00:00:00
>
> [17 ينا 2017, 15:19:27]
> [Debug] [/dev/cdc-wdm0] Received message (translated)...
> >>>>>> QMUX:
> >>>>>> length = 18
> >>>>>> flags =
> 0x80
> >>>>>> service =
> "ctl"
> >>>>>>
> client = 0
> >>>>>>
> QMI:
> >>>>>>
> flags = "response"
> >>>>>> transaction = 1
> >>>>>> tlv_length =
> 7
> >>>>>>
> message = "Sync" (0x0027)
> >>>>>> TLV:
> >>>>>> type =
> "Result" (0x02)
> >>>>>> length =
> 4
> >>>>>>
> value = 00:00:00:00
> >>>>>> translated =
> SUCCESS
>
> [17 ينا 2017,
> 15:19:27] [Debug] [/dev/cdc-wdm0] Sync operation finished
> [17 ينا 2017, 15:19:27] [Debug]
> [/dev/cdc-wdm0] Setting network port data format...
> [17 ينا 2017, 15:19:27] [Debug]
> [/dev/cdc-wdm0] Sent message...
> <<<<<< RAW:
> <<<<<< length = 21
> <<<<<< data =
> 01:14:00:00:00:00:00:02:26:00:
> 09:00:10:02:00:02:00:01:01:00: 00
>
> [17 ينا 2017, 15:19:27] [Debug]
> [/dev/cdc-wdm0] Sent message (translated)...
> <<<<<< QMUX:
> <<<<<< length = 20
> <<<<<< flags =
> 0x00
> <<<<<< service =
> "ctl"
> <<<<<<
> client = 0
> <<<<<<
> QMI:
> <<<<<<
> flags = "none"
> <<<<<< transaction = 2
> <<<<<< tlv_length =
> 9
> <<<<<<
> message = "Set Data Format" (0x0026)
> <<<<<< TLV:
> <<<<<< type =
> "Protocol" (0x10)
> <<<<<< length =
> 2
> <<<<<<
> value = 02:00
> <<<<<< translated =
> raw-ip
> <<<<<< TLV:
> <<<<<< type =
> "Format" (0x01)
> <<<<<< length =
> 1
> <<<<<<
> value = 00
> <<<<<< translated =
> absent
>
> [17 ينا 2017,
> 15:19:27] [Debug] [/dev/cdc-wdm0] Received message...
> >>>>>> RAW:
> >>>>>> length = 28
> >>>>>> data =
> 01:1B:00:80:00:00:01:02:26:00:
> 10:00:02:04:00:00:00:00:00:12: 01:00:00:10:02:00:02:00
>
> [17 ينا 2017, 15:19:27]
> [Debug] [/dev/cdc-wdm0] Received message (translated)...
> >>>>>> QMUX:
> >>>>>> length = 27
> >>>>>> flags =
> 0x80
> >>>>>> service =
> "ctl"
> >>>>>>
> client = 0
> >>>>>>
> QMI:
> >>>>>>
> flags = "response"
> >>>>>> transaction = 2
> >>>>>> tlv_length =
> 16
> >>>>>>
> message = "Set Data Format" (0x0026)
> >>>>>> TLV:
> >>>>>> type =
> "Result" (0x02)
> >>>>>> length =
> 4
> >>>>>>
> value = 00:00:00:00
> >>>>>> translated =
> SUCCESS
> >>>>>> TLV:
> >>>>>> type = 0x12
> >>>>>> length = 1
> >>>>>> value = 00
> >>>>>> TLV:
> >>>>>> type =
> "Protocol" (0x10)
> >>>>>> length =
> 2
> >>>>>>
> value = 02:00
> >>>>>> translated =
> raw-ip
>
> [17 ينا 2017,
> 15:19:27] [Debug] [/dev/cdc-wdm0] Network port data format
> operation finished
> [17 ينا 2017,
> 15:19:27] [Debug] QMI Device at '/dev/cdc-wdm0'
> ready
> [17 ينا 2017, 15:19:27] [Debug]
> [/dev/cdc-wdm0] Assuming service 'wds' is
> supported...
> [17 ينا 2017, 15:19:27]
> [Debug] [/dev/cdc-wdm0] Allocating new client ID...
> [17 ينا 2017, 15:19:27] [Debug]
> [/dev/cdc-wdm0] Sent message...
> <<<<<< RAW:
> <<<<<< length = 16
> <<<<<< data =
> 01:0F:00:00:00:00:00:03:22:00: 04:00:01:01:00:01
>
> [17 ينا 2017, 15:19:27]
> [Debug] [/dev/cdc-wdm0] Sent message (translated)...
> <<<<<< QMUX:
> <<<<<< length = 15
> <<<<<< flags =
> 0x00
> <<<<<< service =
> "ctl"
> <<<<<<
> client = 0
> <<<<<<
> QMI:
> <<<<<<
> flags = "none"
> <<<<<< transaction = 3
> <<<<<< tlv_length =
> 4
> <<<<<<
> message = "Allocate CID" (0x0022)
> <<<<<< TLV:
> <<<<<< type =
> "Service" (0x01)
> <<<<<< length =
> 1
> <<<<<<
> value = 01
> <<<<<< translated =
> wds
>
> [17 ينا 2017,
> 15:19:27] [Debug] [/dev/cdc-wdm0] Received message...
> >>>>>> RAW:
> >>>>>> length = 24
> >>>>>> data =
> 01:17:00:80:00:00:01:03:22:00:
> 0C:00:02:04:00:00:00:00:00:01: 02:00:01:23
>
> [17 ينا 2017, 15:19:27]
> [Debug] [/dev/cdc-wdm0] Received message (translated)...
> >>>>>> QMUX:
> >>>>>> length = 23
> >>>>>> flags =
> 0x80
> >>>>>> service =
> "ctl"
> >>>>>>
> client = 0
> >>>>>>
> QMI:
> >>>>>>
> flags = "response"
> >>>>>> transaction = 3
> >>>>>> tlv_length =
> 12
> >>>>>>
> message = "Allocate CID" (0x0022)
> >>>>>> TLV:
> >>>>>> type =
> "Result" (0x02)
> >>>>>> length =
> 4
> >>>>>>
> value = 00:00:00:00
> >>>>>> translated =
> SUCCESS
> >>>>>> TLV:
> >>>>>> type =
> "Allocation Info" (0x01)
> >>>>>> length =
> 2
> >>>>>>
> value = 01:23
> >>>>>> translated = [
> service = 'wds' cid = '35' ]
>
> [17 ينا 2017, 15:19:27]
> [Debug] [/dev/cdc-wdm0] Registered 'wds' (version
> unknown) client with ID '35'
> [17
> ينا 2017, 15:19:27] [Debug] Network start parameters set
> (apn: 'xxxx.vzwstatic', 3gpp_profile: '0',
> 3gpp2_profile: '0', auth: 'unspecified',
> username: 'unspecified', password:
> 'unspecified', autoconnect:
> 'unspecified')
> [17 ينا 2017,
> 15:19:27] [Debug] Asynchronously starting network...
> [17 ينا 2017, 15:19:27] [Debug]
> [/dev/cdc-wdm0] Sent message...
> <<<<<< RAW:
> <<<<<< length = 34
> <<<<<< data =
> 01:21:00:00:01:23:00:01:00:20:
> 00:15:00:19:01:00:04:14:0E:00:
> 77:65:30:31:2E:76:7A:77:73:74: 61:74:69:63
>
> [17 ينا 2017, 15:19:27]
> [Debug] [/dev/cdc-wdm0] Sent message (translated)...
> <<<<<< QMUX:
> <<<<<< length = 33
> <<<<<< flags =
> 0x00
> <<<<<< service =
> "wds"
> <<<<<<
> client = 35
> <<<<<<
> QMI:
> <<<<<<
> flags = "none"
> <<<<<< transaction = 1
> <<<<<< tlv_length =
> 21
> <<<<<<
> message = "Start Network" (0x0020)
> <<<<<< TLV:
> <<<<<< type =
> "IP Family Preference" (0x19)
> <<<<<< length =
> 1
> <<<<<<
> value = 04
> <<<<<< translated =
> ipv4
> <<<<<< TLV:
> <<<<<< type =
> "APN" (0x14)
> <<<<<< length =
> 14
> <<<<<<
> value = 77:65:30:31:2E:76:7A:77:73:74:
> 61:74:69:63
> <<<<<<
> translated = xxxx.vzwstatic
>
> [17 ينا 2017, 15:19:27] [Debug]
> [/dev/cdc-wdm0] Received message...
> >>>>>> RAW:
> >>>>>> length = 20
> >>>>>> data =
> 01:13:00:80:01:23:02:01:00:20:
> 00:07:00:02:04:00:01:00:1A:00
>
> [17 ينا 2017, 15:19:27] [Debug]
> [/dev/cdc-wdm0] Received message (translated)...
> >>>>>> QMUX:
> >>>>>> length = 19
> >>>>>> flags =
> 0x80
> >>>>>> service =
> "wds"
> >>>>>>
> client = 35
> >>>>>>
> QMI:
> >>>>>>
> flags = "response"
> >>>>>> transaction = 1
> >>>>>> tlv_length =
> 7
> >>>>>>
> message = "Start Network" (0x0020)
> >>>>>> TLV:
> >>>>>> type =
> "Result" (0x02)
> >>>>>> length =
> 4
> >>>>>>
> value = 01:00:1A:00
> >>>>>> translated =
> FAILURE: NoEffect
>
> error:
> couldn't start network: QMI protocol error (26):
> 'NoEffect'
> [/dev/cdc-wdm0] Client ID
> not released:
> Service:
> 'wds'
> CID:
> '35'
> [17 ينا 2017, 15:19:27]
> [Debug] [/dev/cdc-wdm0] Releasing 'wds' client with
> flags 'none'...
> [17 ينا 2017,
> 15:19:27] [Debug] [/dev/cdc-wdm0] Unregistered 'wds'
> client with ID '35'
> [17 ينا 2017,
> 15:19:27] [Debug] Client released
>
>
> 2017-01-17 21:02 GMT+01:00
> Tang Nguyen <tang_nguyen at yahoo.com>:
> I didn't see the output of
> command
>
>
>
> qmicli -d /dev/cdc-wdm0 --wds-start-network="apn=wxxx
> .vzwstatic,ip-type=4"
> --device-open-net="net-raw-ip| net-no-qos-header"
> --device-open-sync --client-no-release-cid -v
>
>
>
> Can you put the debug output in your email.
>
>
>
> Also, can you send the full output of AT+CGDCONT?.
> Normally, it should be a list of profile.
>
>
>
> Question: Do you try to connect to live Verizon network or
> with base station simulator ? Verizon modem connectivity
> is abit different with other module. Verizon modem would use
> PDP #1 to register with IP Multimedia System (IMS), and IMS
> is responsible for SMS, video message, etc. For internet
> traffic, modem would use PDP#3 to connect to network. If
> you instruct modem using PDP#1 to connect to Internet APN,
> it would fails.
>
>
>
>
>
>
>
> --tang
>
>
>
>
>
>
>
> ------------------------------ --------------
>
> On Tue, 1/17/17, heni wael <waelheni91 at gmail.com>
> wrote:
>
>
>
> Subject: Re: MC7455 PROBLEM
>
> To: libqmi-devel at lists.freedesktop
> .org
>
> Date: Tuesday, January 17, 2017, 2:46 PM
>
>
>
> Hey Tang
>
> Did you see the attached debug output
>
> I used now the kernel 4.9
>
> but same problem
>
> It look a problem in the qmicli
>
> Thanks
>
>
>
> 2017-01-17 10:18 GMT+01:00
>
> Aleksander Morgado <aleksander at aleksander.es>:
>
> On Mon,
>
> Jan 16, 2017 at 5:25 PM, heni wael <waelheni91 at gmail.com>
>
> wrote:
>
>
>
> >
>
>
>
> > and i tried your suggestion but got some issues
>
>
>
> > [root at mc7455-1-qpcs-local ~]# qmicli -d
>
> /dev/cdc-wdm0
>
>
>
> > --wds-set-autoconnect- settings=disabled
>
>
>
> > error: couldn't set autoconnect settings: QMI
>
> protocol error (3): 'Internal'
>
>
>
> >
>
>
>
> > have you got any advice ?
>
>
>
>
>
>
>
> Oh weird, no idea :/
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> --
>
>
>
> Aleksander
>
>
>
> https://aleksander.es
>
>
>
>
>
>
>
> -----Inline
> Attachment Follows-----
>
>
>
> _____________________________ __________________
>
> libqmi-devel mailing list
>
> libqmi-devel at lists.freedeskto
> p.org
>
> https://lists.freedesktop.
> org/mailman/listinfo/libqmi- devel
>
>
>
>
>
>
>
> -----Inline Attachment Follows-----
>
> _______________________________________________
> libqmi-devel mailing list
> libqmi-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/libqmi-devel
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/libqmi-devel/attachments/20170118/7a979ca3/attachment-0001.html>
More information about the libqmi-devel
mailing list