Firmware update of MC7455 timing out.

[Aleksander Morgado]

On Wed, Jan 10, 2018 at 9:18 PM, Aleksander Morgado
<aleksander at aleksander.es> wrote:
> On Wed, Jan 10, 2018 at 12:35 PM, Paul Gildea <gildeap at tcd.ie> wrote:
>> I uninstalled libqmi to test out upgrading with the Sierra Wireless
>> driver/application. That worked fine and I upgraded to the newest firmware
>> successfully. I reinstalled libqmi to try it out again, upgrading from the
>> new firmware this time in case my old firmware was causing a problem however
>> it had the same issue below. I checked permissions at each stage and also
>> that nothing else was using the port. I can still upgrade my MC7304's fine
>> with libqmi, has anyone upgraded their MC7455's firmware?
>>
>>> [10 Jan 2018, 12:25:55] [Debug] [qfu,utils] operating mode set
>>> successfully...
>>> [10 Jan 2018, 12:25:55] [Debug] [qfu-updater] reset requested
>>> successfully...
>>> [10 Jan 2018, 12:25:55] [Debug] [qfu-updater] cleaning up QMI device...
>>> [10 Jan 2018, 12:25:55] [Debug] [/dev/cdc-wdm0] Releasing 'dms' client
>>> with flags 'none'...
>>> [10 Jan 2018, 12:25:55] [Debug] [/dev/cdc-wdm0] Unregistered 'dms' client
>>> with ID '2'
>>> rebooting in download mode...
>>> [10 Jan 2018, 12:25:55] [Debug] [qfu-updater] reset requested, now waiting
>>> for TTY device...
>>> [10 Jan 2018, 12:26:07] [Debug] [qfu-udev] event: remove ttyUSB0
>>> [10 Jan 2018, 12:26:07] [Debug] [qfu-udev] event: remove 2-3:1.0
>>> [10 Jan 2018, 12:26:07] [Debug] [qfu-udev] event: remove ttyUSB1
>>> [10 Jan 2018, 12:26:07] [Debug] [qfu-udev] event: remove ttyUSB2
>>> [10 Jan 2018, 12:26:07] [Debug] [qfu-udev] event: remove 2-3:1.2
>>> [10 Jan 2018, 12:26:07] [Debug] [qfu-udev] event: remove 2-3:1.3
>>> [10 Jan 2018, 12:26:07] [Debug] [qfu-udev] event: remove wwan0
>>> [10 Jan 2018, 12:26:07] [Debug] [qfu-udev] event: remove cdc-wdm0
>>> [10 Jan 2018, 12:26:07] [Debug] [qfu-udev] event: remove 2-3:1.8
>>> [10 Jan 2018, 12:26:07] [Debug] [qfu-udev] event: remove wwan1
>>> [10 Jan 2018, 12:26:07] [Debug] [qfu-udev] event: remove cdc-wdm1
>>> [10 Jan 2018, 12:26:07] [Debug] [qfu-udev] event: remove 2-3:1.10
>>> [10 Jan 2018, 12:26:07] [Debug] [qfu-udev] event: remove 2-3
>>> [10 Jan 2018, 12:26:08] [Debug] [qfu-udev] event: add 1-6
>>> [10 Jan 2018, 12:26:08] [Debug] [qfu-udev] event: add 1-6:1.0
>>> [10 Jan 2018, 12:26:08] [Debug] [qfu-udev] event: add ttyUSB0
>>> [10 Jan 2018, 12:26:38] [Debug] [qfu-udev] event: remove ttyUSB0
>>> [10 Jan 2018, 12:26:38] [Debug] [qfu-udev] event: remove 1-6:1.0
>>> [10 Jan 2018, 12:26:38] [Debug] [qfu-udev] event: remove 1-6
>>> [10 Jan 2018, 12:26:45] [Debug] [qfu-udev] event: add 2-3
>>> [10 Jan 2018, 12:26:45] [Debug] [qfu-udev] event: add 2-3:1.2
>>> [10 Jan 2018, 12:26:45] [Debug] [qfu-udev] event: add 2-3:1.0
>>> [10 Jan 2018, 12:26:45] [Debug] [qfu-udev] event: add 2-3:1.8
>>> [10 Jan 2018, 12:26:45] [Debug] [qfu-udev] event: add cdc-wdm0
>>> [10 Jan 2018, 12:26:45] [Debug] [qfu-udev] event: add 2-3:1.10
>>> [10 Jan 2018, 12:26:45] [Debug] [qfu-udev] event: add cdc-wdm1
>>> [10 Jan 2018, 12:26:45] [Debug] [qfu-udev] event: add 2-3:1.3
>>> [10 Jan 2018, 12:26:45] [Debug] [qfu-udev] event: add ttyUSB0
>>> [10 Jan 2018, 12:26:45] [Debug] [qfu-udev] waiting device (tty) matched:
>>> ttyUSB0
>>> [10 Jan 2018, 12:26:45] [Debug] [qfu-updater] TTY device found:
>>> /dev/ttyUSB0
>>> download mode detected
>>> [10 Jan 2018, 12:26:45] [Debug] [qfu-qdl-device] opening TTY: /dev/ttyUSB0
>>> [10 Jan 2018, 12:26:45] [Debug] [qfu-qdl-device] setting terminal in raw
>>> mode...
>>> [10 Jan 2018, 12:26:45] [Debug] [qfu,dload-message] sent sdp:
>>> [10 Jan 2018, 12:26:45] [Debug] [qfu-qdl-device] >> 70:00:00 [3, unframed]
>>> [10 Jan 2018, 12:26:45] [Debug] [qfu-qdl-device] >> 7E:70:00:00:14:46:7E
>>> [7]
>>> [10 Jan 2018, 12:26:45] [Debug] [qfu-qdl-device] << 13:70:00:00:6A:9A:7E
>>> [7]
>>> [10 Jan 2018, 12:26:45] [Debug] [qfu-qdl-device] << 13:70:00:00 [4,
>>> unframed]
>>> error: error creating device: unexpected response received in dload sdp:
>>> 0x13
>>
>
> Which is the FW version you're trying to upload to the MC7455? (e.g.
> the full name of the file)
>

Nevermind, just read your previous emails... SWI9X30C_02.24.05.06.cwe
and SWI9X30C_02.24.05.06_VERIZON_002.034_000.nvu right?

Any difference if you run with --override-download added to the update command?

-- 
Aleksander
https://aleksander.es