A few initial EM7565 observations

[Reinhard Speyerer]

On Thu, Dec 14, 2017 at 11:01:57AM +0100, Bjørn Mork wrote:
> This is based on a device running firmware 'SWI9X50C_01.00.02.00' and
> is likely not applicable to any later firmware revisions...
> 
> [...]
> 
> 4) as noted by both Reinhard and Sebastian: USBCOMP defaults to
>   '1,3,50D' which should enable both rmnet0 and rmnet1, but the
>   firmware will show only rmnet0 (USB interface number 8).
> 

Hi Bjørn,

according to the information now available here

https://source.sierrawireless.com/resources/airprime/application_notes_and_code_samples/airprime---multiple-pdn-support-on-newer-sierra-wireless-modules/
https://techship.com/downloads/sierra-wireless-multiple-pdn-support-on-mdm9x06-9x07-9x50-chipset-based-modules-guide/

having only one USB RMNET interface is not specific to the EM7565 or
firmware 'SWI9X50C_01.00.02.00'. My guess is that Sierra Wireless will
set the default to 1,3,10D in a future firmware update to make it
match reality.

Regards,
Reinhard