Fibocom FM150-NA / GLib-CRITICAL

[Daniele Palmas]

Hi Aleksander and all,

Il giorno mar 28 gen 2020 alle ore 11:56 Aleksander Morgado
<aleksander at aleksander.es> ha scritto:
>
> Hey,
>
> > > > > > <<<<<< TLV:
> > > > > > <<<<<<   type       = "Info" (0x01)
> > > > > > <<<<<<   length     = 14
> > > > > > <<<<<<   value      = 80:F0:FA:02:00:E1:F5:05:04:02:03:05:08:0A
> > > > > > <<<<<<   translated = [ max_tx_channel_rate = '50000000'
> > > > > > max_rx_channel_rate = '100000000' data_service_capability =
> > > > > > 'non-simultaneous-cs-ps' sim_capability = 'supported' radio_interface_list
> > > > > > = '{ [0] = 'umts ' [1] = 'lte ' [2] = '(null) '}' ]
> > > > >
> > > > > Looks like the QmiDmsRadioInterface and QmiNasRadioInterface (why do we
> > > > > have two of these anyway?) must be extended with an entry for RAT #10.
> > > > >
> > > >
> > > > Yes, looks like we could just set a new "QmiRadioInterface" common to
> > > > all services and deprecate the other two.
> > >
> > > Hi Aleksander,
> > >
> > > on a Quectel RG500Q (still running beta firmware) qmicli --dms-get-capabilities
> > > returns
> > >
> > > <<<<<< TLV:
> > > <<<<<<   type       = "Info" (0x01)
> > > <<<<<<   length     = 14
> > > <<<<<<   value      = 80:F0:FA:02:00:E1:F5:05:04:02:03:05:08:0A
> > > <<<<<<   translated = [ max_tx_channel_rate = '50000000' max_rx_channel_rate = '100000000' data_service_capability = 'non-simultaneous-cs-ps' sim_capability = 'supported' radio_interface_list = '{ [0] = 'umts ' [1] = 'lte ' [2] = '(null) '}' ]
> > >
> > > while qmicli --nas-get-system-selection-preference returns
> > >
> > > <<<<<< TLV:
> > > <<<<<<   type   = 0x1c
> > > <<<<<<   length = 4
> > > <<<<<<   value  = 03:08:0C:05
> > >
> > > which seems to indicate that both enums might actually differ for 5G-capable
> > > devices.
> > >
> > > Sebastian: could you please crosscheck this with the FM150-NA?
> > >
> >
> > So it's 0x0A in DMS and 0x0C in NAS for the new "NR" radio interface?
> > Does anyone have any contact at Quectel that could confirm this?
> >
>
> Can anyone confirm whether these new enum values look right in the
> FM150-NA and RG500Q modules?
> https://gitlab.freedesktop.org/mobile-broadband/libqmi/merge_requests/92
>

I confirm for the FN980 the same values reported by Reinhard

dms-get-capabilities

<<<<<<   type       = "Info" (0x01)
<<<<<<   length     = 18
<<<<<<   value      = 80:F0:FA:02:00:E1:F5:05:04:02:07:01:02:04:05:08:09:0A
<<<<<<   translated = [ max_tx_channel_rate = '50000000'
max_rx_channel_rate = '100000000' data_service_capability =
'non-simultaneous-cs-ps' sim_capability = 'supported'
radio_interface_list = '{ [0] = 'cdma20001x ' [1] = 'evdo ' [2] = 'gsm
' [3] = 'umts ' [4] = 'lte ' [5] = '(null) ' [6] = '(null) '}' ]

nas-get-system-selection-preference

<<<<<<   type       = "Acquisition Order Preference" (0x1c)
<<<<<<   length     = 4
<<<<<<   value      = 03:0C:08:05
<<<<<<   translated = { [0] = '(null) ' [1] = 'lte ' [2] = 'umts '}

so the change looks good.

Related to the name, it seems that Qualcomm is referring to it as NR5G
(see https://www.qualcomm.com/media/documents/files/qxdm-professional-qualcomm-extensible-diagnostic-monitor.pdf
document "QTI Tools Serial Interface Control Document for NR5G").

Regards,
Daniele

> --
> Aleksander
> https://aleksander.es
> _______________________________________________
> libqmi-devel mailing list
> libqmi-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/libqmi-devel