Quectel RM500Q-GL not showing 5G bands or access technology
Reinhard Speyerer
rspmn at arcor.de
Thu Jun 4 17:01:05 UTC 2020
On Thu, Jun 04, 2020 at 05:06:33PM +0200, Sebastian Sjoholm wrote:
> Hi Nick,
>
> The data exists, it is just not parsed. In the verbose printout you can see
> that TLV 0x13is not parsed, and that will contain the 5GNR bands.
>
> -Sebastian
>
> dms_get_band_capability_respTlvs[5] {
> Type = 0x13
> Length = 40
> supported_nr5g_bands {
> supported_nr5g_bands_len = 19
> supported_nr5g_bands = {
> 1, 2, 3, 5, 7, 8, 12, 20, 25, 28, 38, 40, 41, 48, 66, 71, 77, 78,
> 79
> }
> }
> }
>
[+CC: Subash Abhinov Kasiviswanathan]
Hi Sebastian,
I also have seen this TLV to be present in the first firmware version
on the Quectel RG500Q eval kit. However it is no longer present for a
Telit FN980m and a Quectel RM500Q running current firmwares:
Telit FN980m (AT+GMR firmware M0H.001000-B007):
# sqmuxdqwa -p 4200 /dev/cdc-wdm0 &
+OK sqmuxdqwa 1.60 (Kleinkunst) connected to /dev/cdc-wdm0, QMI service(s) 0:1.5,1:1.176,2:1.71,3:1.25,4:1.17,5:1.10,7:1.13,8:1.6,9:2.1,10:2.24,11:1.77,12:1.4,15:1.0,16:2.115,17:1.0,18:1.82,20:1.0,23:1.0,24:1.0,26:1.24,29:1.6,33:1.36,34:1.0,36:1.0,41:1.0,42:1.60,48:1.11,49:1.0,68:1.3,71:1.1,73:1.7,74:1.0,75:1.3,76:1.0,77:1.2,78:1.2,230:1.0,231:1.21,232:1.0,235:1.1, listen port 4200, protocol QMUXD
# gobicmapicli -g ~/lib/GobiConnectionMgmt.so SOCKET:TCP:127.0.0.1:4200,0 1 2 3 5 7 9 11 26
+OK gobicmapicli 2.25 connected to SOCKET:TCP:127.0.0.1:4200,0, QMI service(s) 1,2,3,5,7,9,11,26
DMSGetSoftwareVersion 3000
+OK DMSGetSoftwareVersion 02040000000000010e0033382e30302e3030302d42303037109a000309000000434d5053532e48492e312e302e63382d30303532322d53445835355f414c4c5f5041434b2d313a73647835352e67656e2e70726f64513a7372762d6b72732d6a656e3032020000001d545a2e46552e352e392d30303034323a45415441414e4241413a43524d010000002a424f4f542e53424c2e342e312d30303130343a4d414154414e415a413a7372762d6b72732d6a656e3032
DMSGetBandCapabilities 3000
+OK DMSGetBandCapabilities 020400000000000108008741e80f00000610100800df380fbbe2a300001108002100000000000000123e001e0001000200030004000500070008000c000d000e00110012001300140019001a001c001d001e002000220026002700280029002a002e00300042004700
quit
+OK gobicmapicli disconnected from SOCKET:TCP:127.0.0.1:4200,0
Quectel RM500Q (AT+GMR firmware RM500QGLAAR01A01M4G_BETA_20200330F):
# sqmuxdqwa -p 4200 /dev/cdc-wdm0 &
+OK sqmuxdqwa 1.60 (Kleinkunst) connected to /dev/cdc-wdm0, QMI service(s) 0:1.5,1:1.176,2:1.71,3:1.25,4:1.17,5:1.10,7:1.13,8:1.6,9:2.1,10:2.24,11:1.77,12:1.4,15:1.0,16:2.115,17:1.0,18:1.82,20:1.0,23:1.0,24:1.0,26:1.24,29:1.6,33:1.36,34:1.0,36:1.0,41:1.0,42:1.60,48:1.11,49:1.0,68:1.3,73:1.7,74:1.0,75:1.3,76:1.0,77:1.2,78:1.2, listen port 4200, protocol QMUXD
# gobicmapicli -g ~/lib/GobiConnectionMgmt.so SOCKET:TCP:127.0.0.1:4200,0 1 2 3 5 7 9 11 26
+OK gobicmapicli 2.25 connected to SOCKET:TCP:127.0.0.1:4200,0, QMI service(s) 1,2,3,5,7,9,11,26
DMSGetSoftwareVersion 3000
+OK DMSGetSoftwareVersion 0204000000000001200035303051474c41415230314130314d34475f424554415f32303230303333304610920003090000003d4d5053532e48492e312e302e63382d30303730332d53445835355f414c4c5f5041434b2d313a73647835352e67656e2e70726f64513a7175656374656c020000001d545a2e46552e352e392d30303036313a45415441414e4241413a43524d0100000028424f4f542e53424c2e342e312d30303131373a4d414154414e415a413a48462d53572d50414e4441112200524d35303051474c41415230314130314d34475f424554415f323032303033333046
DMSGetBandCapabilities 3000
+OK DMSGetBandCapabilities 020400000000000108000000c00f00000610100800df380fbbe2a300001108000000000000000000123e001e0001000200030004000500070008000c000d000e00110012001300140019001a001c001d001e002000220026002700280029002a002e00300042004700
quit
+OK gobicmapicli disconnected from SOCKET:TCP:127.0.0.1:4200,0
Maybe somebody from CodeAurora/Qualcomm could enlighten us what to use instead?
Regards,
Reinhard
> root at rm500q:~# qmicli --version
>
> qmicli 1.24.4
> Copyright (C) 2012-2019 Aleksander Morgado
> License GPLv2+: GNU GPL version 2 or later <
> http://gnu.org/licenses/gpl-2.0.html>
> This is free software: you are free to change and redistribute it.
> There is NO WARRANTY, to the extent permitted by law.
>
> root at rm500q:~#
>
> root at rm500q:~# qmicli -p -d /dev/cdc-wdm0 --dms-get-band-capabilities
> [29 May 2020, 04:32:54] -Warning ** [/dev/cdc-wdm0] requested auto mode but
> no MBIM QMUX support available
> [/dev/cdc-wdm0] Device band capabilities retrieved:
> Bands: 'wcdma-2100, wcdma-pcs-1900, wcdma-dcs-1800, wcdma-1700-us,
> wcdma-850-us, wcdma-800, wcdma-900, wcdma-1700-japan, wcdma-850-japan'
> LTE bands: '1, 2, 3, 4, 5, 7, 8, 12, 13, 14, 17, 18, 19, 20, 25, 26, 28,
> 29, 30, 32, 34, 38, 39, 40, 41, 42'
> LTE bands (extended): '1, 2, 3, 4, 5, 7, 8, 12, 13, 14, 17, 18, 19, 20, 25,
> 26, 28, 29, 30, 32, 34, 38, 39, 40, 41, 42, 46, 48, 66, 71'
> root at rm500q:~# qmicli -p -d /dev/cdc-wdm0 --dms-get-band-capabilities
> --verbose
> [29 May 2020, 04:33:33] [Debug] [/dev/cdc-wdm0] Opening device with flags
> 'proxy, auto'...
> [29 May 2020, 04:33:33] [Debug] [/dev/cdc-wdm0] loaded driver of cdc-wdm
> port: qmi_wwan
> [29 May 2020, 04:33:33] -Warning ** [/dev/cdc-wdm0] requested auto mode but
> no MBIM QMUX support available
> [29 May 2020, 04:33:33] [Debug] [/dev/cdc-wdm0] created endpoint
> [29 May 2020, 04:33:33] [Debug] [/dev/cdc-wdm0] sent message...
> <<<<<< RAW:
> <<<<<< length = 28
> <<<<<< data =
> 01:1B:00:00:00:00:00:01:00:FF:10:00:01:0D:00:2F:64:65:76:2F:63:64:63:2D:77:64:6D:30
>
> [29 May 2020, 04:33:33] [Debug] [/dev/cdc-wdm0] sent generic request
> (translated)...
> <<<<<< QMUX:
> <<<<<< length = 27
> <<<<<< flags = 0x00
> <<<<<< service = "ctl"
> <<<<<< client = 0
> <<<<<< QMI:
> <<<<<< flags = "none"
> <<<<<< transaction = 1
> <<<<<< tlv_length = 16
> <<<<<< message = "Internal Proxy Open" (0xFF00)
> <<<<<< TLV:
> <<<<<< type = "Device Path" (0x01)
> <<<<<< length = 13
> <<<<<< value = 2F:64:65:76:2F:63:64:63:2D:77:64:6D:30
> <<<<<< translated = /dev/cdc-wdm0
>
> [29 May 2020, 04:33:33] [Debug] [/dev/cdc-wdm0] received message...
> <<<<<< RAW:
> <<<<<< length = 19
> <<<<<< data = 01:12:00:80:00:00:01:01:00:FF:07:00:02:04:00:00:00:00:00
>
> [29 May 2020, 04:33:33] [Debug] [/dev/cdc-wdm0] received generic response
> (translated)...
> <<<<<< QMUX:
> <<<<<< length = 18
> <<<<<< flags = 0x80
> <<<<<< service = "ctl"
> <<<<<< client = 0
> <<<<<< QMI:
> <<<<<< flags = "response"
> <<<<<< transaction = 1
> <<<<<< tlv_length = 7
> <<<<<< message = "Internal Proxy Open" (0xFF00)
> <<<<<< TLV:
> <<<<<< type = "Result" (0x02)
> <<<<<< length = 4
> <<<<<< value = 00:00:00:00
> <<<<<< translated = SUCCESS
>
> [29 May 2020, 04:33:33] [Debug] QMI Device at '/dev/cdc-wdm0' ready
> [29 May 2020, 04:33:33] [Debug] [/dev/cdc-wdm0] Assuming service 'dms' is
> supported...
> [29 May 2020, 04:33:33] [Debug] [/dev/cdc-wdm0] Allocating new client ID...
> [29 May 2020, 04:33:33] [Debug] [/dev/cdc-wdm0] sent message...
> <<<<<< RAW:
> <<<<<< length = 16
> <<<<<< data = 01:0F:00:00:00:00:00:02:22:00:04:00:01:01:00:02
>
> [29 May 2020, 04:33:33] [Debug] [/dev/cdc-wdm0] sent generic request
> (translated)...
> <<<<<< QMUX:
> <<<<<< length = 15
> <<<<<< flags = 0x00
> <<<<<< service = "ctl"
> <<<<<< client = 0
> <<<<<< QMI:
> <<<<<< flags = "none"
> <<<<<< transaction = 2
> <<<<<< tlv_length = 4
> <<<<<< message = "Allocate CID" (0x0022)
> <<<<<< TLV:
> <<<<<< type = "Service" (0x01)
> <<<<<< length = 1
> <<<<<< value = 02
> <<<<<< translated = dms
>
> [29 May 2020, 04:33:33] [Debug] [/dev/cdc-wdm0] received message...
> <<<<<< RAW:
> <<<<<< length = 24
> <<<<<< data =
> 01:17:00:80:00:00:01:02:22:00:0C:00:02:04:00:00:00:00:00:01:02:00:02:01
>
> [29 May 2020, 04:33:33] [Debug] [/dev/cdc-wdm0] received generic response
> (translated)...
> <<<<<< QMUX:
> <<<<<< length = 23
> <<<<<< flags = 0x80
> <<<<<< service = "ctl"
> <<<<<< client = 0
> <<<<<< QMI:
> <<<<<< flags = "response"
> <<<<<< transaction = 2
> <<<<<< tlv_length = 12
> <<<<<< message = "Allocate CID" (0x0022)
> <<<<<< TLV:
> <<<<<< type = "Result" (0x02)
> <<<<<< length = 4
> <<<<<< value = 00:00:00:00
> <<<<<< translated = SUCCESS
> <<<<<< TLV:
> <<<<<< type = "Allocation Info" (0x01)
> <<<<<< length = 2
> <<<<<< value = 02:01
> <<<<<< translated = [ service = 'dms' cid = '1' ]
>
> [29 May 2020, 04:33:33] [Debug] [/dev/cdc-wdm0] Registered 'dms' (version
> unknown) client with ID '1'
> [29 May 2020, 04:33:33] [Debug] Asynchronously getting band capabilities...
> [29 May 2020, 04:33:33] [Debug] [/dev/cdc-wdm0] sent message...
> <<<<<< RAW:
> <<<<<< length = 13
> <<<<<< data = 01:0C:00:00:02:01:00:01:00:45:00:00:00
>
> [29 May 2020, 04:33:33] [Debug] [/dev/cdc-wdm0] sent generic request
> (translated)...
> <<<<<< QMUX:
> <<<<<< length = 12
> <<<<<< flags = 0x00
> <<<<<< service = "dms"
> <<<<<< client = 1
> <<<<<< QMI:
> <<<<<< flags = "none"
> <<<<<< transaction = 1
> <<<<<< tlv_length = 0
> <<<<<< message = "Get Band Capabilities" (0x0045)
>
> [29 May 2020, 04:33:33] [Debug] [/dev/cdc-wdm0] received message...
> <<<<<< RAW:
> <<<<<< length = 161
> <<<<<< data =
> 01:A0:00:80:02:01:02:01:00:45:00:94:00:02:04:00:00:00:00:00:01:08:00:00:00:C0:0F:00:00:06:10:10:08:00:DF:38:0F:BB:E2:A3:00:00:11:08:00:00:00:00:00:00:00:00:00:12:3E:00:1E:00:01:00:02:00:03:00:04:00:05:00:07:00:08:00:0C:00:0D:00:0E:00:11:00:12:00:13:00:14:00:19:00:1A:00:1C:00:1D:00:1E:00:20:00:22:00:26:00:27:00:28:00:29:00:2A:00:2E:00:30:00:42:00:47:00:13:28:00:13:00:01:00:02:00:03:00:05:00:07:00:08:00:0C:00:14:00:19:00:1C:00:26:00:28:00:29:00:30:00:42:00:47:00:4D:00:4E:00:4F:00
>
> [29 May 2020, 04:33:33] [Debug] [/dev/cdc-wdm0] received generic response
> (translated)...
> <<<<<< QMUX:
> <<<<<< length = 160
> <<<<<< flags = 0x80
> <<<<<< service = "dms"
> <<<<<< client = 1
> <<<<<< QMI:
> <<<<<< flags = "response"
> <<<<<< transaction = 1
> <<<<<< tlv_length = 148
> <<<<<< message = "Get Band Capabilities" (0x0045)
> <<<<<< TLV:
> <<<<<< type = "Result" (0x02)
> <<<<<< length = 4
> <<<<<< value = 00:00:00:00
> <<<<<< translated = SUCCESS
> <<<<<< TLV:
> <<<<<< type = "Band Capability" (0x01)
> <<<<<< length = 8
> <<<<<< value = 00:00:C0:0F:00:00:06:10
> <<<<<< translated = wcdma-2100, wcdma-pcs-1900, wcdma-dcs-1800,
> wcdma-1700-us, wcdma-850-us, wcdma-800, wcdma-900, wcdma-1700-japan,
> wcdma-850-japan
> <<<<<< TLV:
> <<<<<< type = "LTE Band Capability" (0x10)
> <<<<<< length = 8
> <<<<<< value = DF:38:0F:BB:E2:A3:00:00
> <<<<<< translated = 1, 2, 3, 4, 5, 7, 8, 12, 13, 14, 17, 18, 19, 20, 25,
> 26, 28, 29, 30, 32, 34, 38, 39, 40, 41, 42
> <<<<<< TLV:
> <<<<<< type = 0x11
> <<<<<< length = 8
> <<<<<< value = 00:00:00:00:00:00:00:00
> <<<<<< TLV:
> <<<<<< type = "Extended LTE Band Capability" (0x12)
> <<<<<< length = 62
> <<<<<< value =
> 1E:00:01:00:02:00:03:00:04:00:05:00:07:00:08:00:0C:00:0D:00:0E:00:11:00:12:00:13:00:14:00:19:00:1A:00:1C:00:1D:00:1E:00:20:00:22:00:26:00:27:00:28:00:29:00:2A:00:2E:00:30:00:42:00:47:00
> <<<<<< translated = { [0] = '1 ' [1] = '2 ' [2] = '3 ' [3] = '4 ' [4] =
> '5 ' [5] = '7 ' [6] = '8 ' [7] = '12 ' [8] = '13 ' [9] = '14 ' [10] = '17 '
> [11] = '18 ' [12] = '19 ' [13] = '20 ' [14] = '25 ' [15] = '26 ' [16] = '28
> ' [17] = '29 ' [18] = '30 ' [19] = '32 ' [20] = '34 ' [21] = '38 ' [22] =
> '39 ' [23] = '40 ' [24] = '41 ' [25] = '42 ' [26] = '46 ' [27] = '48 ' [28]
> = '66 ' [29] = '71 '}
> <<<<<< TLV:
> <<<<<< type = 0x13
> <<<<<< length = 40
> <<<<<< value =
> 13:00:01:00:02:00:03:00:05:00:07:00:08:00:0C:00:14:00:19:00:1C:00:26:00:28:00:29:00:30:00:42:00:47:00:4D:00:4E:00:4F:00
>
> [/dev/cdc-wdm0] Device band capabilities retrieved:
> Bands: 'wcdma-2100, wcdma-pcs-1900, wcdma-dcs-1800, wcdma-1700-us,
> wcdma-850-us, wcdma-800, wcdma-900, wcdma-1700-japan, wcdma-850-japan'
> LTE bands: '1, 2, 3, 4, 5, 7, 8, 12, 13, 14, 17, 18, 19, 20, 25, 26, 28,
> 29, 30, 32, 34, 38, 39, 40, 41, 42'
> LTE bands (extended): '1, 2, 3, 4, 5, 7, 8, 12, 13, 14, 17, 18, 19, 20, 25,
> 26, 28, 29, 30, 32, 34, 38, 39, 40, 41, 42, 46, 48, 66, 71'
> [29 May 2020, 04:33:33] [Debug] [/dev/cdc-wdm0] Releasing 'dms' client with
> flags 'release-cid'...
> [29 May 2020, 04:33:33] [Debug] [/dev/cdc-wdm0] Unregistered 'dms' client
> with ID '1'
> [29 May 2020, 04:33:33] [Debug] [/dev/cdc-wdm0] sent message...
> <<<<<< RAW:
> <<<<<< length = 17
> <<<<<< data = 01:10:00:00:00:00:00:03:23:00:05:00:01:02:00:02:01
>
> [29 May 2020, 04:33:33] [Debug] [/dev/cdc-wdm0] sent generic request
> (translated)...
> <<<<<< QMUX:
> <<<<<< length = 16
> <<<<<< flags = 0x00
> <<<<<< service = "ctl"
> <<<<<< client = 0
> <<<<<< QMI:
> <<<<<< flags = "none"
> <<<<<< transaction = 3
> <<<<<< tlv_length = 5
> <<<<<< message = "Release CID" (0x0023)
> <<<<<< TLV:
> <<<<<< type = "Release Info" (0x01)
> <<<<<< length = 2
> <<<<<< value = 02:01
> <<<<<< translated = [ service = 'dms' cid = '1' ]
>
> [29 May 2020, 04:33:33] [Debug] [/dev/cdc-wdm0] received message...
> <<<<<< RAW:
> <<<<<< length = 24
> <<<<<< data =
> 01:17:00:80:00:00:01:03:23:00:0C:00:02:04:00:00:00:00:00:01:02:00:02:01
>
> [29 May 2020, 04:33:33] [Debug] [/dev/cdc-wdm0] received generic response
> (translated)...
> <<<<<< QMUX:
> <<<<<< length = 23
> <<<<<< flags = 0x80
> <<<<<< service = "ctl"
> <<<<<< client = 0
> <<<<<< QMI:
> <<<<<< flags = "response"
> <<<<<< transaction = 3
> <<<<<< tlv_length = 12
> <<<<<< message = "Release CID" (0x0023)
> <<<<<< TLV:
> <<<<<< type = "Result" (0x02)
> <<<<<< length = 4
> <<<<<< value = 00:00:00:00
> <<<<<< translated = SUCCESS
> <<<<<< TLV:
> <<<<<< type = "Release Info" (0x01)
> <<<<<< length = 2
> <<<<<< value = 02:01
> <<<<<< translated = [ service = 'dms' cid = '1' ]
>
> [29 May 2020, 04:33:33] [Debug] Client released
> [29 May 2020, 04:33:33] [Debug] Closed
> root at rm500q:~#
>
>
> On Thu, Jun 4, 2020 at 11:45 AM Nick <mips171 at icloud.com> wrote:
>
> > Hi Sebastian,
> >
> > Please find the result in line. I believe we are on 5G non-standalone
> > mode here, but I can ask our contact at the MNO to confirm.
> >
> > root at OpenWrt:~# qmicli -p -d /dev/cdc-wdm0 --dms-get-band-capabilities
> > [/dev/cdc-wdm0] Device band capabilities retrieved:
> > Bands: 'wcdma-2100, wcdma-pcs-1900, wcdma-dcs-1800, wcdma-1700-us,
> > wcdma-850-us, wcdma-800, wcdma-900, wcdma-1700-japan, wcdma-850-japan'
> > LTE bands: '1, 2, 3, 4, 5, 7, 8, 12, 13, 14, 17, 18, 19, 20, 25,
> > 26, 28, 29, 30, 32, 34, 38, 39, 40, 41, 42'
> > LTE bands (extended): '1, 2, 3, 4, 5, 7, 8, 12, 13, 14, 17, 18,
> > 19, 20, 25, 26, 28, 29, 30, 32, 34, 38, 39, 40, 41, 42, 46, 48, 66, 71???
> >
> > root at OpenWrt:~# mmcli -m 0
> > -----------------------------------
> > General | dbus path:
> > /org/freedesktop/ModemManager1/Modem/0
> > | device id:
> > 854940f4d7b0ce19b485d2ae7142f49dfb527684
> > -----------------------------------
> > Hardware | manufacturer: QUALCOMM INCORPORATED
> > | model: 0
> > | firmware revision: RM500QGLAAR01A01M4G_BETA_20200330F
> > 1 [Mar 15 2020 04:00:00]
> > | carrier config: Telstra_Australia_Commercial
> > | carrier config revision: 0A010F00
> > | h/w revision: 20000
> > | supported: gsm-umts, lte
> > | current: gsm-umts, lte
> > | equipment id: 86971003xxxxxx
> > -----------------------------------
> > System | device:
> > /sys/devices/platform/soc/8af8800.usb3/8a00000.dwc3/xhci-hcd.0.auto/usb2/2-1
> > | drivers: qmi_wwan, option
> > | plugin: Quectel
> > | primary port: cdc-wdm0
> > | ports: ttyUSB0 (qcdm), ttyUSB2 (at),
> > ttyUSB3 (at), cdc-wdm0 (qmi),
> > | wwan0 (net)
> > -----------------------------------
> > Status | lock: sim-pin2
> > | unlock retries: sim-pin (3), sim-pin2 (3), sim-puk
> > (10), sim-puk2 (10)
> > | state: connected
> > | power state: on
> > | access tech: lte
> > | signal quality: 54% (recent)
> > -----------------------------------
> > Modes | supported: allowed: 3g; preferred: none
> > | allowed: 4g; preferred: none
> > | allowed: 3g, 4g; preferred: 3g
> > | allowed: 3g, 4g; preferred: 4g
> > | current: allowed: 3g, 4g; preferred: 4g
> > -----------------------------------
> > Bands | supported: utran-1, utran-3, utran-4, utran-6,
> > utran-5, utran-8,
> > | utran-9, utran-2, eutran-1,
> > eutran-2, eutran-3, eutran-4, eutran-5,
> > | eutran-7, eutran-8, eutran-12,
> > eutran-13, eutran-14, eutran-17,
> > | eutran-18, eutran-19, eutran-20,
> > eutran-25, eutran-26, eutran-28,
> > | eutran-29, eutran-30, eutran-32,
> > eutran-34, eutran-38, eutran-39,
> > | eutran-40, eutran-41, eutran-42,
> > eutran-46, eutran-48, eutran-66,
> > | eutran-71, utran-19
> > | current: utran-1, utran-3, utran-4, utran-6,
> > utran-5, utran-8,
> > | utran-9, utran-2, eutran-1,
> > eutran-2, eutran-3, eutran-4, eutran-5,
> > | eutran-7, eutran-8, eutran-12,
> > eutran-13, eutran-14, eutran-17,
> > | eutran-18, eutran-19, eutran-20,
> > eutran-25, eutran-26, eutran-28,
> > | eutran-29, eutran-30, eutran-32,
> > eutran-34, eutran-38, eutran-39,
> > | eutran-40, eutran-41, eutran-42,
> > eutran-46, eutran-48, eutran-66,
> > | eutran-71, utran-19
> > -----------------------------------
> > IP | supported: ipv4, ipv6, ipv4v6
> > -----------------------------------
> > 3GPP | imei: 86971003xxxxxxx
> > | operator id: 50501
> > | operator name: Telstra
> > | registration: home
> > -----------------------------------
> > 3GPP EPS | ue mode of operation: csps-2
> > -----------------------------------
> > SIM | dbus path: /org/freedesktop/ModemManager1/SIM/0
> > -----------------------------------
> > Bearer | dbus path:
> > /org/freedesktop/ModemManager1/Bearer/0
> >
> > root at OpenWrt:~# mmcli --version
> >
> > mmcli 1.13.0
> >
> > root at OpenWrt:~# qmicli --version
> > qmicli 1.25.900
> >
> >
> > Best,
> > Nick
> >
> > > On 4 Jun 2020, at 1:46 pm, Sebastian Sjoholm <
> > sebastian.sjoholm at gmail.com> wrote:
> > >
> > > Hi Nick,
> > >
> > > Please provide the printouts, and also let us know if you are on 5G NSA
> > or SA (I would assume NSA).
> > >
> > > Regards,
> > > Sebastian
> > >
> > >
> > > On Thu, Jun 4, 2020 at 2:47 AM Nick <mips171 at icloud.com> wrote:
> > > Hey,
> > >
> > > I am on git master modemmanager and libqmi 1.25.900. My RM500Q-GL is
> > showing LTE, but not 5gnr as an available access technology. I???m also not
> > seeing any 5G bands in --dms-get-band-capabilities. Can anyone else
> > confirm, or advise?
> > >
> > > There is a possibility that I need to get a 5G enabled SIM, as I???m
> > testing on Telstra in Australia.
> > >
> > >
> > > Best,
> > > Nick
> > > _______________________________________________
> > > libqmi-devel mailing list
> > > libqmi-devel at lists.freedesktop.org
> > > https://lists.freedesktop.org/mailman/listinfo/libqmi-devel
> > >
> > >
> > > _______________________________________________
> > > libqmi-devel mailing list
> > > libqmi-devel at lists.freedesktop.org
> > > https://lists.freedesktop.org/mailman/listinfo/libqmi-devel
> >
> >
>
> --
> Sebastian Sjöholm
>
> Simborgarvägen 116
> SE-18439 Åkersberga
> Sverige
>
> Mobile : +46 76 335 0667
> Email : sebastian.sjoholm at gmail.com
> _______________________________________________
> libqmi-devel mailing list
> libqmi-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/libqmi-devel
More information about the libqmi-devel
mailing list