QMI errors om Telit LM960A18 after reset
Aleksander Morgado
aleksander at aleksander.es
Sun Mar 15 09:02:25 UTC 2020
Hey Alex,
> > > I have been trying to use a Telit LM960A18 using ModemManager 1.12.6
> > > using libqmi 1.24.4 on a router running openwrt. I have been
> > > experiencing instability some time after the modem is reset.
> > > Sporadically after one or more resets, the modem will refuse to
> > > connect or reset. Resets have no effect, while attemping to bring
> > > up the wwan network interface for the modem results in
> > >
> > > daemon.notice netifd: wwan (8476): error: couldn't connect the
> > > modem:
> > > 'GDBus.Error:org.freedesktop.libqmi.Error.Protocol.InvalidTransition:
> > > Couldn't set operating mode: QMI protocol error (60):
> > > 'InvalidTransition''
> > >
> > > being printed in syslog. This failure persists after a warm reboot.
> > > In order to fully reset the modem a hard power cycle of the board is
> > > required.
> > >
> > > Is this something that can be worked around in libqmi or is it
> > > entirely the modem's fault?
> >
> > I think we need to see ModemManager debug logs to try to understand
> > how the transition to online mode is failing. Would you be able to get
> > those while the issue is reproduced?
> >
>
> Attached debug logs from modemmanager
How did you enable those debug logs? All QMI message logs are missing
in that output I'm afraid.
Try to modify the init.d script and setup the daemon call with e.g.
-debug --log-file=/tmp/MM.log
--
Aleksander
https://aleksander.es
More information about the libqmi-devel
mailing list