QMI protocol error (14): 'CallFailed'

[Marco Salatin]

ok but if i repeat command cid number increase:

root at raspberrypi:/home/pi# qmicli -d /dev/cdc-wdm0 -p
--device-open-"net=net-raw-ip|net-no-qos-header"
--wds-start-network="apn=internet.wind,ip-type=4" --client-no-release-cid
error: couldn't start network: QMI protocol error (14): 'CallFailed'
call end reason (12): (null)
verbose call end reason (2,201): [internal] error
[/dev/cdc-wdm0] Client ID not released:
        Service: 'wds'
            CID: '1'
root at raspberrypi:/home/pi# qmicli -d /dev/cdc-wdm0 -p
--device-open-"net=net-raw-ip|net-no-qos-header"
--wds-start-network="apn=internet.wind,ip-type=4" --client-no-release-cid
error: couldn't start network: QMI protocol error (14): 'CallFailed'
call end reason (12): (null)
verbose call end reason (2,201): [internal] error
[/dev/cdc-wdm0] Client ID not released:
        Service: 'wds'
            CID: '2'
root at raspberrypi:/home/pi# qmicli -d /dev/cdc-wdm0 -p
--device-open-"net=net-raw-ip|net-no-qos-header"
--wds-start-network="apn=internet.wind,ip-type=4" --client-no-release-cid
error: couldn't start network: QMI protocol error (14): 'CallFailed'
call end reason (12): (null)
verbose call end reason (2,201): [internal] error
[/dev/cdc-wdm0] Client ID not released:
        Service: 'wds'
            CID: '3'
root at raspberrypi:/home/pi# qmicli -d /dev/cdc-wdm0 -p
--device-open-"net=net-raw-ip|net-no-qos-header"
--wds-start-network="apn=internet.wind,ip-type=4" --client-no-release-cid
error: couldn't start network: QMI protocol error (14): 'CallFailed'
call end reason (12): (null)
verbose call end reason (2,201): [internal] error
[/dev/cdc-wdm0] Client ID not released:
        Service: 'wds'
            CID: '4'


is correct?

Il giorno lun 12 ott 2020 alle ore 17:08 Aleksander Morgado <
aleksander at aleksander.es> ha scritto:

> Hey,
>
> > Error system command: qmicli -d /dev/cdc-wdm0 -p
> --device-open-"net=net-raw-ip|net-no-qos-header"
> --wds-start-network="apn=myinternet.wind,ip-type=4" --client-no-release-cid
> > error: couldn't start network: QMI protocol error (14): 'CallFailed'
> > call end reason (3): generic-no-service
> > verbose call end reason (3,2001): [cm] no-service
> > [/dev/cdc-wdm0] Client ID not released:
> >         Service: 'wds'
> >             CID: '1'
> >
> > how can i release cid 1 to reconnect again?
> >
> >
> > qmicli -d /dev/cdc-wdm0 -p --wds-stop-network=" + PDH + " --client-cid="
> + CID
> >
>
> You should do the above if the Start Network succeeded, because you
> know the PDH.
>
> > or
> >
> > qmicli -d /dev/cdc-wdm0 -p --wds-noop --client-cid=" + CID
> >
>
> You should do the above if the Start Network failed, because there was
> no PDH returned.
>
> --
> Aleksander
> https://aleksander.es
>


-- 


*Marco Salatin*T. +39 388 1947558

skype: marco.salatin

marco.salatin at gmail.com
Sito web: www.salatin.eu

Ai sensi del D.Lgs. 196/2003 si precisa che le informazioni contenute in
questo messaggio sono riservate ed a uso esclusivo del destinatario.
Qualora il messaggio in parola Le fosse pervenuto per errore, La invito ad
eliminarlo senza copiarlo e a non inoltrarlo a terzi, dandomene gentilmente
comunicazione. Grazie.
Pursuant to Legislative Decree No. 196/2003, you are hereby informed that
this message contains confidential information intended only for the use of
the addressee. If you are not the addressee, and have received this message
by mistake, please delete it and immediately notify us. You may not copy or
disseminate this message to anyone. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/libqmi-devel/attachments/20201013/ddea59ce/attachment.htm>