<div dir="ltr"><div><div>Thanks for reply </div><div>It work for a few day and then it give this errors </div>i got this : AT+CGDCONT? +CGDCONT: 1,"IP","xxxx.vzwstatic","0.0.0.0",0,0,0,0 OK </div>and this [root@mc7455-1-qpcs-local ~]# qmicli -d /dev/cdc-wdm0 --wds-start-network="apn=xxxx.vzwstatic,ip-type=4" --device-open-net="net-raw-ip|net-no-qos-header" --device-open-sync --client-no-release-cid -v [17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Opening device with flags 'sync, net-raw-ip, net-no-qos-header'... [17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Running sync... [17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Sent message... <<<<<< RAW: <<<<<< length = 12 <<<<<< data = 01:0B:00:00:00:00:00:01:27:00:00:00 [17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Sent message (translated)... <<<<<< QMUX: <<<<<< length = 11 <<<<<< flags = 0x00 <<<<<< service = "ctl" <<<<<< client = 0 <<<<<< QMI: <<<<<< flags = "none" <<<<<< transaction = 1 <<<<<< tlv_length = 0 <<<<<< message = "Sync" (0x0027) [17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Received message... >>>>>> RAW: >>>>>> length = 19 >>>>>> data = 01:12:00:80:00:00:01:01:27:00:07:00:02:04:00:00:00:00:00 [17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Received message (translated)... >>>>>> QMUX: >>>>>> length = 18 >>>>>> flags = 0x80 >>>>>> service = "ctl" >>>>>> client = 0 >>>>>> QMI: >>>>>> flags = "response" >>>>>> transaction = 1 >>>>>> tlv_length = 7 >>>>>> message = "Sync" (0x0027) >>>>>> TLV: >>>>>> type = "Result" (0x02) >>>>>> length = 4 >>>>>> value = 00:00:00:00 >>>>>> translated = SUCCESS [17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Sync operation finished [17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Setting network port data format... [17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Sent message... <<<<<< RAW: <<<<<< length = 21 <<<<<< data = 01:14:00:00:00:00:00:02:26:00:09:00:10:02:00:02:00:01:01:00:00 [17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Sent message (translated)... <<<<<< QMUX: <<<<<< length = 20 <<<<<< flags = 0x00 <<<<<< service = "ctl" <<<<<< client = 0 <<<<<< QMI: <<<<<< flags = "none" <<<<<< transaction = 2 <<<<<< tlv_length = 9 <<<<<< message = "Set Data Format" (0x0026) <<<<<< TLV: <<<<<< type = "Protocol" (0x10) <<<<<< length = 2 <<<<<< value = 02:00 <<<<<< translated = raw-ip <<<<<< TLV: <<<<<< type = "Format" (0x01) <<<<<< length = 1 <<<<<< value = 00 <<<<<< translated = absent [17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Received message... >>>>>> RAW: >>>>>> length = 28 >>>>>> data = 01:1B:00:80:00:00:01:02:26:00:10:00:02:04:00:00:00:00:00:12:01:00:00:10:02:00:02:00 [17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Received message (translated)... >>>>>> QMUX: >>>>>> length = 27 >>>>>> flags = 0x80 >>>>>> service = "ctl" >>>>>> client = 0 >>>>>> QMI: >>>>>> flags = "response" >>>>>> transaction = 2 >>>>>> tlv_length = 16 >>>>>> message = "Set Data Format" (0x0026) >>>>>> TLV: >>>>>> type = "Result" (0x02) >>>>>> length = 4 >>>>>> value = 00:00:00:00 >>>>>> translated = SUCCESS >>>>>> TLV: >>>>>> type = 0x12 >>>>>> length = 1 >>>>>> value = 00 >>>>>> TLV: >>>>>> type = "Protocol" (0x10) >>>>>> length = 2 >>>>>> value = 02:00 >>>>>> translated = raw-ip [17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Network port data format operation finished [17 ينا 2017, 15:19:27] [Debug] QMI Device at '/dev/cdc-wdm0' ready [17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Assuming service 'wds' is supported... [17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Allocating new client ID... [17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Sent message... <<<<<< RAW: <<<<<< length = 16 <<<<<< data = 01:0F:00:00:00:00:00:03:22:00:04:00:01:01:00:01 [17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Sent message (translated)... <<<<<< QMUX: <<<<<< length = 15 <<<<<< flags = 0x00 <<<<<< service = "ctl" <<<<<< client = 0 <<<<<< QMI: <<<<<< flags = "none" <<<<<< transaction = 3 <<<<<< tlv_length = 4 <<<<<< message = "Allocate CID" (0x0022) <<<<<< TLV: <<<<<< type = "Service" (0x01) <<<<<< length = 1 <<<<<< value = 01 <<<<<< translated = wds [17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Received message... >>>>>> RAW: >>>>>> length = 24 >>>>>> data = 01:17:00:80:00:00:01:03:22:00:0C:00:02:04:00:00:00:00:00:01:02:00:01:23 [17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Received message (translated)... >>>>>> QMUX: >>>>>> length = 23 >>>>>> flags = 0x80 >>>>>> service = "ctl" >>>>>> client = 0 >>>>>> QMI: >>>>>> flags = "response" >>>>>> transaction = 3 >>>>>> tlv_length = 12 >>>>>> message = "Allocate CID" (0x0022) >>>>>> TLV: >>>>>> type = "Result" (0x02) >>>>>> length = 4 >>>>>> value = 00:00:00:00 >>>>>> translated = SUCCESS >>>>>> TLV: >>>>>> type = "Allocation Info" (0x01) >>>>>> length = 2 >>>>>> value = 01:23 >>>>>> translated = [ service = 'wds' cid = '35' ] [17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Registered 'wds' (version unknown) client with ID '35' [17 ينا 2017, 15:19:27] [Debug] Network start parameters set (apn: 'xxxx.vzwstatic', 3gpp_profile: '0', 3gpp2_profile: '0', auth: 'unspecified', username: 'unspecified', password: 'unspecified', autoconnect: 'unspecified') [17 ينا 2017, 15:19:27] [Debug] Asynchronously starting network... [17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Sent message... <<<<<< RAW: <<<<<< length = 34 <<<<<< data = 01:21:00:00:01:23:00:01:00:20:00:15:00:19:01:00:04:14:0E:00:77:65:30:31:2E:76:7A:77:73:74:61:74:69:63 [17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Sent message (translated)... <<<<<< QMUX: <<<<<< length = 33 <<<<<< flags = 0x00 <<<<<< service = "wds" <<<<<< client = 35 <<<<<< QMI: <<<<<< flags = "none" <<<<<< transaction = 1 <<<<<< tlv_length = 21 <<<<<< message = "Start Network" (0x0020) <<<<<< TLV: <<<<<< type = "IP Family Preference" (0x19) <<<<<< length = 1 <<<<<< value = 04 <<<<<< translated = ipv4 <<<<<< TLV: <<<<<< type = "APN" (0x14) <<<<<< length = 14 <<<<<< value = 77:65:30:31:2E:76:7A:77:73:74:61:74:69:63 <<<<<< translated = xxxx.vzwstatic [17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Received message... >>>>>> RAW: >>>>>> length = 20 >>>>>> data = 01:13:00:80:01:23:02:01:00:20:00:07:00:02:04:00:01:00:1A:00 [17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Received message (translated)... >>>>>> QMUX: >>>>>> length = 19 >>>>>> flags = 0x80 >>>>>> service = "wds" >>>>>> client = 35 >>>>>> QMI: >>>>>> flags = "response" >>>>>> transaction = 1 >>>>>> tlv_length = 7 >>>>>> message = "Start Network" (0x0020) >>>>>> TLV: >>>>>> type = "Result" (0x02) >>>>>> length = 4 >>>>>> value = 01:00:1A:00 >>>>>> translated = FAILURE: NoEffect error: couldn't start network: QMI protocol error (26): 'NoEffect' [/dev/cdc-wdm0] Client ID not released: Service: 'wds' CID: '35' [17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Releasing 'wds' client with flags 'none'... [17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Unregistered 'wds' client with ID '35' [17 ينا 2017, 15:19:27] [Debug] Client released </div><div class="gmail_extra"> <div class="gmail_quote">2017-01-17 21:02 GMT+01:00 Tang Nguyen <<a href="mailto:tang_nguyen@yahoo.com" target="_blank">tang_nguyen@yahoo.com</a>>: <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">I didn't see the output of command qmicli -d /dev/cdc-wdm0 --wds-start-network="apn=wxxx .vzwstatic,ip-type=4" --device-open-net="net-raw-ip| net-no-qos-header" --device-open-sync --client-no-release-cid -v Can you put the debug output in your email. Also, can you send the full output of AT+CGDCONT?. Normally, it should be a list of profile. Question: Do you try to connect to live Verizon network or with base station simulator ? Verizon modem connectivity is abit different with other module. Verizon modem would use PDP #1 to register with IP Multimedia System (IMS), and IMS is responsible for SMS, video message, etc. For internet traffic, modem would use PDP#3 to connect to network. If you instruct modem using PDP#1 to connect to Internet APN, it would fails. --tang -------------------------------------------- On Tue, 1/17/17, heni wael <<a href="mailto:waelheni91@gmail.com">waelheni91@gmail.com</a>> wrote: Subject: Re: MC7455 PROBLEM To: <a href="mailto:libqmi-devel@lists.freedesktop.org">libqmi-devel@lists.freedesktop.org</a> Date: Tuesday, January 17, 2017, 2:46 PM <div class="HOEnZb"><div class="h5"> Hey Tang Did you see the attached debug output I used now the kernel 4.9 but same problem It look a problem in the qmicli Thanks 2017-01-17 10:18 GMT+01:00 Aleksander Morgado <<a href="mailto:aleksander@aleksander.es">aleksander@aleksander.es</a>>: On Mon, Jan 16, 2017 at 5:25 PM, heni wael <<a href="mailto:waelheni91@gmail.com">waelheni91@gmail.com</a>> wrote: > > and i tried your suggestion but got some issues > [root@mc7455-1-qpcs-local ~]# qmicli -d /dev/cdc-wdm0 > --wds-set-autoconnect- settings=disabled > error: couldn't set autoconnect settings: QMI protocol error (3): 'Internal' > > have you got any advice ? Oh weird, no idea :/ -- Aleksander <a href="https://aleksander.es" rel="noreferrer" target="_blank">https://aleksander.es</a> </div></div><div class="HOEnZb"><div class="h5"> -----Inline Attachment Follows----- _______________________________________________ libqmi-devel mailing list <a href="mailto:libqmi-devel@lists.freedesktop.org">libqmi-devel@lists.freedesktop.org</a> <a href="https://lists.freedesktop.org/mailman/listinfo/libqmi-devel" rel="noreferrer" target="_blank">https://lists.freedesktop.org/mailman/listinfo/libqmi-devel</a> </div></div></blockquote></div> </div>