<div dir="ltr"><div><div><div><div><div><div><div>OK <br></div>now i have firmware installed and the network connected <br></div>i try to use qmicli to do the LTE connection<br></div>i have this <br><br>AT<br>OK<br>AT!ENTERCND="A710"<br>OK<br>AT!UDUSBCOMP?<br>!UDUSBCOMP: 6<br><br>OK<br>AT!GOBIIMPREF<br>ERROR<br>AT!GOBIIMPREF?<br>!GOBIIMPREF: <br> preferred fw version: 05.05.58.01<br> preferred carrier name: VZW<br> preferred config name: VZW_005.029_000<br> current fw version: 05.05.58.01<br> current carrier name: VZW<br> current config name: VZW_005.029_000<br><br>OK<br><br><br></div>And network connected <br></div>i dont know if the PDP is Ok or not<br><br><br>AT<br>OK<br>at!gstatus?<br>!GSTATUS: <br>Current Time: 203 Temperature: 33<br>Bootup Time: 5 Mode: ONLINE <br>System mode: LTE PS state: Attached <br>LTE band: B4 LTE bw: 10 MHz <br>LTE Rx chan: 2100 LTE Tx chan: 20100<br>EMM state: Registered Normal Service <br>RRC state: RRC Idle <br>IMS reg state: Full Srv IMS mode: Normal <br><br>RSSI (dBm): -54 Tx Power: 0<br>RSRP (dBm): -78 TAC: 2501 (9473)<br>RSRQ (dB): -9 Cell ID: 0091A216 (9544214)<br>SINR (dB): 3.6<br><br><br>OK<br>AT+CGCONTRDP<br>+CGCONTRDP: 1,5,vzwims,38.0.16.16.129.83.54.223.0.0.0.23.143.19.114.1, 254.128.0.0.0.0.0.0.0.0.0.23.143.19.114.64, 32.1.72.136.0.104.6<br><br>OK<br>AT+CGDCONT?<br>+CGDCONT: 1,"IPV4V6","vzwims","0.0.0.0",0,0<br>+CGDCONT: 2,"IPV4V6","vzwadmin","0.0.0.0",0,0<br>+CGDCONT: 3,"IPV4V6","vzwinternet","0.0.0.0",0,0<br>+CGDCONT: 4,"IPV4V6","vzwapp","0.0.0.0",0,0<br>+CGDCONT: 5,"IPV4V6","vzw800","0.0.0.0",0,0<br>+CGDCONT: 9,"IPV6","vzwims","0.0.0.0",0,0<br>+CGDCONT: 10,"IP","vzwadmin","0.0.0.0",0,0<br>+CGDCONT: 11,"IP","vzwinternet","0.0.0.0",0,0<br>+CGDCONT: 12,"IPV4V6","vzwapp","0.0.0.0",0,0<br>+CGDCONT: 13,"IP","","0.0.0.0",0,0<br><br>OK<br>AT+CGATT?<br>+CGATT: 1<br><br>OK<br><br></div>but when i try to use the qmicli i got an error <br><br><br>[root@localhost ~]# qmi-network /dev/cdc-wdm0 start<br>Loading profile at /etc/qmi-network.conf...<br> APN: we01.vzwstatic<br> APN user: unset<br> APN password: unset<br> qmi-proxy: no<br>Loading previous state from /tmp/qmi-network-state-cdc-wdm0...<br> Previous CID: 1<br> Previous PDH: 1138072296<br>error: cannot re-start network, PDH already exists<br><br>qmicli -d /dev/cdc-wdm0 --wds-get-current-settings<br>[root@localhost ~]# qmicli -d /dev/cdc-wdm0 --wds-get-current-settings<br>error: couldn't get current settings: QMI protocol error (15): 'OutOfCall'<br>[root@localhost ~]# qmi-network /dev/cdc-wdm0 start<br>Loading profile at /etc/qmi-network.conf...<br> APN: we01.vzwstatic<br> APN user: unset<br> APN password: unset<br> qmi-proxy: no<br>Loading previous state from /tmp/qmi-network-state-cdc-wdm0...<br> Previous CID: 1<br> Previous PDH: 1138072296<br>error: cannot re-start network, PDH already exists<br><br></div>have you got an idea ?<br></div><div class="gmail_extra"><br><div class="gmail_quote">2017-01-23 21:35 GMT+01:00 heni wael <span dir="ltr"><<a href="mailto:waelheni91@gmail.com" target="_blank">waelheni91@gmail.com</a>></span>:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Ok Thanks<br><br></div><div class="HOEnZb"><div class="h5"><div class="gmail_extra"><br><div class="gmail_quote">2017-01-23 21:31 GMT+01:00 Sebastian Sjoholm <span dir="ltr"><<a href="mailto:sebastian.sjoholm@gmail.com" target="_blank">sebastian.sjoholm@gmail.com</a>></span>:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><span>> On Jan 23, 2017, at 21:26 , heni wael <<a href="mailto:waelheni91@gmail.com" target="_blank">waelheni91@gmail.com</a>> wrote:<br>
><br>
> [root@localhost ~]# cat /etc/modprobe.d/blacklist-mode<wbr>m.conf<br>
> blacklist qcserial<br>
> blacklist qmi_wwan<br>
> blacklist usb_wwan<br>
> blacklist cdc_mbim<br>
> blacklist cdc_wdm<br>
> blacklist cdc_ncm<br>
> blacklist sierra<br>
> blacklist sierra_net<br>
> [root@localhost ~]#<br>
><br>
<br>
</span>That looks pretty OK, and the dmesg and lsusb -t shows that the qmi_wwan is still loaded after that?<br>
<br>
I can find a bunch of cases via google when the blacklist file is not loaded, but it is depended on what linux you are running, I think a google search for your system would be a good start.<br>
<span class="m_-3293872406650236247HOEnZb"><font color="#888888"><br>
-Sebastian<br>
<br>
<br>
<br>
</font></span></blockquote></div><br></div>
</div></div></blockquote></div><br></div>