<div dir="ltr">You should first start the network using --wds-start-network with valid apn and ip-type. Once the network started(success), you will be able to read the current settings.<div><br></div><div>Thanks</div><div>Balaji</div></div><div class="gmail_extra"><br><div class="gmail_quote">On Tue, Oct 10, 2017 at 12:38 PM, Erik Kazandjian <span dir="ltr"><<a href="mailto:erik.kazandjian@accelleran.com" target="_blank">erik.kazandjian@accelleran.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">I'm a little confused now. All of a sudden the MC7430 refuses to reveil its IP address. Although the modem is PS attached (verified with --nas-get-serving-sytem) the call to --wds-get-current-settings now return not in Call. What could be the reason for this behaviour that re-appeared out of nothing<div><br></div><div>cheers</div><span class="HOEnZb"><font color="#888888"><div><br></div><div>Erik</div></font></span></div><div class="HOEnZb"><div class="h5"><div class="gmail_extra"><br><div class="gmail_quote">On Tue, Oct 3, 2017 at 11:26 AM, Erik Kazandjian <span dir="ltr"><<a href="mailto:erik.kazandjian@accelleran.com" target="_blank">erik.kazandjian@accelleran.<wbr>com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">This always works for me<br> <br> But I wonder . Why /sys/class/net/wwan0/qmi/raw_i<wbr>p is set to N. Is this a driver issue ? Can I change this ?<br> <br> BR<br> <br> Erik<br> <br> <br> sudo -s<br> root@raspberrypi:/home/pi# ifconfig wwan0 down<br> root@raspberrypi:/home/pi# echo Y > /sys/class/net/wwan0/qmi/raw_i<wbr>p<br> root@raspberrypi:/home/pi# ifconfig wwan0 up<br> root@raspberrypi:/home/pi# qmicli -d /dev/cdc-wdm0 --dms-set-operating-mode=low-p<wbr>ower<br> [/dev/cdc-wdm0] Operating mode set successfully<br> root@raspberrypi:/home/pi# qmicli -d /dev/cdc-wdm0 --dms-set-operating-mode=onlin<wbr>e<br> [/dev/cdc-wdm0] Operating mode set successfully<br> root@raspberrypi:/home/pi# qmicli -d /dev/cdc-wdm1 --nas-get-serving-system<br> [/dev/cdc-wdm1] Successfully got serving system:<br> Registration state: 'registered'<br> CS: 'attached'<br> PS: 'attached'<br> Selected network: '3gpp'<br> Radio interfaces: '1'<br> [0]: 'lte'<br> Roaming status: 'off'<br> Data service capabilities: '1'<br> [0]: 'lte'<br> Current PLMN:<br> MCC: '1'<br> MNC: '1'<br> Description: 'Test1-1'<br> Roaming indicators: '1'<br> [0]: 'off' (lte)<br> 3GPP location area code: '65534'<br> 3GPP cell ID: '64768'<br> Detailed status:<br> Status: 'available'<br> Capability: 'cs-ps'<br> HDR Status: 'none'<br> HDR Hybrid: 'no'<br> Forbidden: 'no'<br> LTE tracking area code: '1'<br> Full operator code info:<br> MCC: '1'<br> MNC: '1'<br> MNC with PCS digit: 'no'<br> root@raspberrypi:/home/pi# qmicli -d /dev/cdc-wdm0 --wds-get-current-settings<br> [/dev/cdc-wdm0] Current settings retrieved:<br> IP Family: IPv4<br> IPv4 address: 10.188.20.63<br> IPv4 subnet mask: 255.255.255.128<br> IPv4 gateway address: 10.188.20.64<br> IPv4 primary DNS: 8.8.8.8<br> MTU: 1500<br> Domains: none<br> root@raspberrypi:/home/pi# ifconfig wwan0 <a href="http://10.188.20.63/24" rel="noreferrer" target="_blank">10.188.20.63/24</a><br> root@raspberrypi:/home/pi# route add -host 8.8.8.8 gw 10.188.20.63 wwan0<br> root@raspberrypi:/home/pi# ping 8.8.8.8<br> PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.<br> 64 bytes from <a href="http://8.8.8.8" rel="noreferrer" target="_blank">8.8.8.8</a>: icmp_seq=1 ttl=57 time=41.2 ms<br> 64 bytes from <a href="http://8.8.8.8" rel="noreferrer" target="_blank">8.8.8.8</a>: icmp_seq=2 ttl=57 time=41.7 ms<br> 64 bytes from <a href="http://8.8.8.8" rel="noreferrer" target="_blank">8.8.8.8</a>: icmp_seq=3 ttl=57 time=35.7 ms<div class="m_-7997269021713442376HOEnZb"><div class="m_-7997269021713442376h5"><br> <br> <br> On 10/03/2017 09:27 AM, Aleksander Morgado wrote:<br> <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> On Tue, Oct 3, 2017 at 8:51 AM, Erik Kazandjian<br> <<a href="mailto:erik.kazandjian@accelleran.com" target="_blank">erik.kazandjian@accelleran.co<wbr>m</a>> wrote:<br> <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> To be very honest we are developing a cell ourselves and I see on the cell<br> that the modem is attached. But now I also noticed if I reboot everything ,<br> the Pi and the modem I see the modem atteching and when I ask for its<br> current settings it responds with an IP address.<br> <br> This seems to work every time I put switch the modem from low power to<br> online. Without any other qmi command.<br> <br> </blockquote> This looks like the modem is configured for auto-connect, so that as<br> soon as it's registered in the network it sets up the active<br> connection?<br> <br> </blockquote> <br> </div></div></blockquote></div><br></div> </div></div><br>______________________________<wbr>_________________<br> libqmi-devel mailing list<br> <a href="mailto:libqmi-devel@lists.freedesktop.org">libqmi-devel@lists.<wbr>freedesktop.org</a><br> <a href="https://lists.freedesktop.org/mailman/listinfo/libqmi-devel" rel="noreferrer" target="_blank">https://lists.freedesktop.org/<wbr>mailman/listinfo/libqmi-devel</a><br> <br></blockquote></div><br></div>