<html> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8"> </head> <body text="#000000" bgcolor="#FFFFFF"> Hi Using the busybox dhcp client it seems to work BR Erik <div class="moz-cite-prefix">On 10/17/2017 07:52 AM, Erik Kazandjian wrote: </div> <blockquote type="cite" cite="mid:f9daff1d-e6bf-cd04-16e7-6e166aec270f@accelleran.com"> <meta http-equiv="content-type" content="text/html; charset=utf-8"> Hi, The MC7430 does behave very strange when I try to setup ip connectivity to it. When I bring the modem on line qmicli -d /dev/cdc-wdm0 --dms-set-operating-mode=online I see the modem attaching on our cell and in the Attach accept message it gets an IP address. That address is not automatically added to the wwan0 interface. Verification of the nas-serving-system returns the following info qmicli -d /dev/cdc-wdm0 --nas-get-serving-system [/dev/cdc-wdm0] Successfully got serving system: Registration state: 'registered' CS: 'attached' PS: 'attached' Selected network: '3gpp' Radio interfaces: '1' [0]: 'lte' Roaming status: 'off' Data service capabilities: '1' [0]: 'lte' Current PLMN: MCC: '1' MNC: '1' Description: 'Test1-1' Roaming indicators: '1' [0]: 'off' (lte) 3GPP location area code: '65534' 3GPP cell ID: '769' Detailed status: Status: 'available' Capability: 'cs-ps' HDR Status: 'none' HDR Hybrid: 'no' Forbidden: 'no' LTE tracking area code: '1' Full operator code info: MCC: '1' MNC: '1' MNC with PCS digit: 'no' However when I try to get information about the IP address using qmicli -d /dev/cdc-wdm0 --wds-get-current-settings I get error: couldn't get current settings: QMI protocol error (15): 'OutOfCall' Until a few days ago this would just return me the assigned IP address. If I than start the network (can someone explain me what this does) I get the following qmi-network /dev/cdc-wdm0 start Loading profile at /etc/qmi-network.conf... APN: internet APN user: unset APN password: unset qmi-proxy: no Checking data format with 'qmicli -d /dev/cdc-wdm0 --wda-get-data-format '... Device link layer protocol retrieved: raw-ip Getting expected data format with 'qmicli -d /dev/cdc-wdm0 --get-expected-data-format'... Expected link layer protocol retrieved: raw-ip Device and kernel link layer protocol match: raw-ip Starting network with 'qmicli -d /dev/cdc-wdm0 --wds-start-network=apn='internet' --client-no-release-cid '... Saving state at /tmp/qmi-network-state-cdc-wdm0... (CID: 35) Saving state at /tmp/qmi-network-state-cdc-wdm0... (PDH: 62876480) Network started successfully If I than ask for the current settings qmicli -d /dev/cdc-wdm0 --wds-get-current-settings I get Current settings retrieved: IP Family: IPv4 IPv4 address: 10.188.20.18 IPv4 subnet mask: 255.255.255.252 IPv4 gateway address: 10.188.20.17 IPv4 primary DNS: 8.8.8.8 MTU: 1500 Domains: none The first thing I noticed is the netmask. I don't know where the modem is getting this from but it is definitely not coming from the core network. Anyway if I assign 10.188.20.18/24 to the wwan0 interface I see that wwan0 is configured but the Link encap is UNSPEC wwan0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.188.20.18 P-t-P:10.188.20.18 Mask:255.255.255.0 inet6 addr: fe80::d37a:aed3:aeb:4d4/64 Scope:Link UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:9 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:504 (504.0 B) If I than try to ping from my raspberry pi which has the modem connected to a host behind the core network, I see nothing arriving in the GTP tunnel on core network, however when I ping from the host behind the core network to 10.188.20.18 I get replies from the ping , I even see them in both directions going through the GTP tunnel but on my linux interface (wwan0) on the rasberry pi I don't see any packet being received or transmitted. So it looks as if the Sierra Wireless card is responding to the pings but it is not offering its IP capabilities to the my Linux. Does any body has any idea what is going on ? Kind regards Erik </blockquote> </body> </html>