<div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr">In the latest version 1.33.2 of libqmi I'm getting strange warnings. It's very noisy and not useful. It can be silenced with --silent, is this normal?<div><div dir="ltr" class="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div><div></div></div></div></div></div></div></div><div><br></div><div>I'm using a new firmware with a Sierra WP76xx device.</div><div><br></div><div>Every command is prefixed by:</div><div><div>[01 Dec 2022, 09:16:20] -Warning ** [/dev/lte/cdc] couldn't detect transport type of port: unexpected port subsystem</div><div>[01 Dec 2022, 09:16:20] -Warning ** [/dev/lte/cdc] requested QMI mode but unexpected transport type found</div><div><br>This happens for every command, e.g.</div><div>qmicli --device-open-qmi -p -d /dev/lte/cdc --wds-get-lte-attach-parameters<br></div><div><div>[01 Dec 2022, 09:16:20] -Warning ** [/dev/lte/cdc] couldn't detect transport type of port: unexpected port subsystem</div><div>[01 Dec 2022, 09:16:20] -Warning ** [/dev/lte/cdc] requested QMI mode but unexpected transport type found</div><div>LTE attach parameters successfully retrieved:</div><div><span style="white-space:pre"> </span>APN: MYAPN</div><div><span style="white-space:pre">    </span>IP support type: ipv4</div><div><span style="white-space:pre"> </span>OTA attach performed: yes</div></div></div><div><br></div><div>Note, I have symlinked the device to /dev/lte/cdc but the same thing happens if I use /dev/cdc-wdm0 instead.</div></div></div></div></div></div></div></div>