<html>
<head>
<base href="https://bugs.documentfoundation.org/">
</head>
<body><table border="1" cellspacing="0" cellpadding="8">
<tr>
<th>Bug ID</th>
<td><a class="bz_bug_link
bz_status_UNCONFIRMED "
title="UNCONFIRMED - Launching LO components takes 2-3 minutes"
href="https://bugs.documentfoundation.org/show_bug.cgi?id=131911">131911</a>
</td>
</tr>
<tr>
<th>Summary</th>
<td>Launching LO components takes 2-3 minutes
</td>
</tr>
<tr>
<th>Product</th>
<td>LibreOffice
</td>
</tr>
<tr>
<th>Version</th>
<td>6.4.2.2 release
</td>
</tr>
<tr>
<th>Hardware</th>
<td>All
</td>
</tr>
<tr>
<th>OS</th>
<td>Linux (All)
</td>
</tr>
<tr>
<th>Status</th>
<td>UNCONFIRMED
</td>
</tr>
<tr>
<th>Severity</th>
<td>normal
</td>
</tr>
<tr>
<th>Priority</th>
<td>medium
</td>
</tr>
<tr>
<th>Component</th>
<td>Writer
</td>
</tr>
<tr>
<th>Assignee</th>
<td>libreoffice-bugs@lists.freedesktop.org
</td>
</tr>
<tr>
<th>Reporter</th>
<td>rnturner@theturners.org
</td>
</tr></table>
<p>
<div>
<pre>Description:
Following a patch to openSUSE today that included several updates related to
LibreOffice -- bringing everything in LO up to "6.4.2.2-1p151.3.12.3" --
launching oowriter (or another component, i.e., oocalc) now takes 2-3 minutes
to launch---even to an empty document. The splash progress bar stops at about
20% completion for an inordinate amount of time. If I run oowriter by hand
using strace (from a terminal) and pipe it the results through a script that
times how long each line of output took to be outputted, I see that a call to
"wait()" is the culprit. (See log file below)
Prior to today's patches (i.e. yesterday), this behavior was not seen. The
previous set of patches applied to LO were on 2020-04-01 and brought it to
6.3.3.2-lp151.3.9.1. There were no slow launch problems seen following that
update.
According to openSUSE's logging of the patch process, no errors were
encountered while applying the patches that resulted in 6.4.2.2-xxx.
Thinking that this could have been some sort of user profile corruption, I've
followed the instructions for starting LO in safe mode, and reset my profile
back to "factory settings" (I don't lose much by doing this and it's easily
resetable) but that has not resulting in normal (a few seconds) startup time.
Steps to Reproduce:
1. Open LibreOffice Writer from openSUSE panel menu, OR...
2. Open terminal emulator
3. oowriter
Actual Results:
(Note: "timetagger -d" is a local utility that times the interval between
successive lines out output.)
$ strace oowriter 2>&1 | timetagger -d | cat -n | tee oowriter.log
1 0000-00:00:00 execve("/usr/bin/oowriter", ["oowriter"], 0x7fff54d3ccd0
/* 148 vars */) = 0
2 0000-00:00:00 brk(NULL) = 0x55b968aeb000
3 0000-00:00:00 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No
such file or directory)
4 0000-00:00:00 openat(AT_FDCWD,
"/lib64/bash/tls/x86_64/x86_64/libreadline.so.7", O_RDONLY|O_CLOEXEC) = -1
ENOENT (No such file or directory)
5 0000-00:00:00 stat("/lib64/bash/tls/x86_64/x86_64", 0x7fff6b812de0) =
-1 ENOENT (No such file or directory)
6 0000-00:00:00 openat(AT_FDCWD,
"/lib64/bash/tls/x86_64/libreadline.so.7", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No
such file or directory)
7 0000-00:00:00 stat("/lib64/bash/tls/x86_64", 0x7fff6b812de0) = -1
ENOENT (No such file or directory)
8 0000-00:00:00 openat(AT_FDCWD,
"/lib64/bash/tls/x86_64/libreadline.so.7", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No
such file or directory)
9 0000-00:00:00 stat("/lib64/bash/tls/x86_64", 0x7fff6b812de0) = -1
ENOENT (No such file or directory)
10 0000-00:00:00 openat(AT_FDCWD, "/lib64/bash/tls/libreadline.so.7",
O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
11 0000-00:00:00 stat("/lib64/bash/tls", 0x7fff6b812de0) = -1 ENOENT (No
such file or directory)
12 0000-00:00:00 openat(AT_FDCWD,
"/lib64/bash/x86_64/x86_64/libreadline.so.7", O_RDONLY|O_CLOEXEC) = -1 ENOENT
(No such file or directory)
13 0000-00:00:00 stat("/lib64/bash/x86_64/x86_64", 0x7fff6b812de0) = -1
ENOENT (No such file or directory)
14 0000-00:00:00 openat(AT_FDCWD, "/lib64/bash/x86_64/libreadline.so.7",
O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
15 0000-00:00:00 stat("/lib64/bash/x86_64", 0x7fff6b812de0) = -1 ENOENT
(No such file or directory)
16 0000-00:00:00 openat(AT_FDCWD, "/lib64/bash/x86_64/libreadline.so.7",
O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
17 0000-00:00:00 stat("/lib64/bash/x86_64", 0x7fff6b812de0) = -1 ENOENT
(No such file or directory)
18 0000-00:00:00 openat(AT_FDCWD, "/lib64/bash/libreadline.so.7",
O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
19 0000-00:00:00 stat("/lib64/bash", 0x7fff6b812de0) = -1 ENOENT (No
such file or directory)
20 0000-00:00:00 openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC)
= 3
21 0000-00:00:00 fstat(3, {st_mode=S_IFREG|0644, st_size=258374, ...}) = 0
22 0000-00:00:00 mmap(NULL, 258374, PROT_READ, MAP_PRIVATE, 3, 0) =
0x7fd631aa7000
23 0000-00:00:00 close(3) = 0
24 0000-00:00:00 openat(AT_FDCWD, "/lib64/libreadline.so.7",
O_RDONLY|O_CLOEXEC) = 3
25 0000-00:00:00 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0
\213\1\0\0\0\0\0"..., 832) = 832
26 0000-00:00:00 fstat(3, {st_mode=S_IFREG|0755, st_size=317440, ...}) = 0
27 0000-00:00:00 mmap(NULL, 8192, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fd631aa5000
28 0000-00:00:00 mmap(NULL, 2417928, PROT_READ|PROT_EXEC,
MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fd631673000
29 0000-00:00:00 mprotect(0x7fd6316b9000, 2093056, PROT_NONE) = 0
30 0000-00:00:00 mmap(0x7fd6318b8000, 32768, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x45000) = 0x7fd6318b8000
31 0000-00:00:00 mmap(0x7fd6318c0000, 5384, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fd6318c0000
32 0000-00:00:00 close(3) = 0
33 0000-00:00:00 openat(AT_FDCWD, "/lib64/libdl.so.2", O_RDONLY|O_CLOEXEC)
= 3
34 0000-00:00:00 read(3,
"\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\20\0\0\0\0\0\0"..., 832) =
832
35 0000-00:00:00 fstat(3, {st_mode=S_IFREG|0755, st_size=18400, ...}) = 0
36 0000-00:00:00 mmap(NULL, 2109584, PROT_READ|PROT_EXEC,
MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fd63146f000
37 0000-00:00:00 mprotect(0x7fd631472000, 2093056, PROT_NONE) = 0
38 0000-00:00:00 mmap(0x7fd631671000, 8192, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7fd631671000
39 0000-00:00:00 close(3) = 0
40 0000-00:00:00 openat(AT_FDCWD, "/lib64/libc.so.6", O_RDONLY|O_CLOEXEC)
= 3
41 0000-00:00:00 read(3,
"\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0`D\2\0\0\0\0\0"..., 832) = 832
42 0000-00:00:00 fstat(3, {st_mode=S_IFREG|0755, st_size=2038480, ...}) =
0
43 0000-00:00:00 mmap(NULL, 3909496, PROT_READ|PROT_EXEC,
MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fd6310b4000
44 0000-00:00:00 mprotect(0x7fd631265000, 2097152, PROT_NONE) = 0
45 0000-00:00:00 mmap(0x7fd631465000, 24576, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1b1000) = 0x7fd631465000
46 0000-00:00:00 mmap(0x7fd63146b000, 14200, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fd63146b000
47 0000-00:00:00 close(3) = 0
48 0000-00:00:00 openat(AT_FDCWD, "/lib64/libtinfo.so.6",
O_RDONLY|O_CLOEXEC) = 3
49 0000-00:00:00 read(3,
"\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0p\225\0\0\0\0\0\0"..., 832) =
832
50 0000-00:00:00 fstat(3, {st_mode=S_IFREG|0755, st_size=189296, ...}) = 0
51 0000-00:00:00 mmap(NULL, 2285344, PROT_READ|PROT_EXEC,
MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fd630e86000
52 0000-00:00:00 mprotect(0x7fd630eac000, 2093056, PROT_NONE) = 0
53 0000-00:00:00 mmap(0x7fd6310ab000, 36864, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x25000) = 0x7fd6310ab000
54 0000-00:00:00 close(3) = 0
55 0000-00:00:00 mmap(NULL, 8192, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fd631aa3000
56 0000-00:00:00 arch_prctl(ARCH_SET_FS, 0x7fd631aa3b80) = 0
57 0000-00:00:00 mprotect(0x7fd631465000, 12288, PROT_READ) = 0
58 0000-00:00:00 mprotect(0x7fd6310ab000, 4096, PROT_READ) = 0
59 0000-00:00:00 mprotect(0x7fd631671000, 4096, PROT_READ) = 0
60 0000-00:00:00 mprotect(0x7fd6318b8000, 8192, PROT_READ) = 0
61 0000-00:00:00 mprotect(0x55b968618000, 8192, PROT_READ) = 0
62 0000-00:00:00 mprotect(0x7fd631ae7000, 4096, PROT_READ) = 0
63 0000-00:00:00 munmap(0x7fd631aa7000, 258374) = 0
64 0000-00:00:00 openat(AT_FDCWD, "/dev/tty", O_RDWR|O_NONBLOCK) = 3
65 0000-00:00:00 close(3) = 0
66 0000-00:00:00 stat("/usr/lib/locale/locale-archive", 0x7fff6b8133f0) =
-1 ENOENT (No such file or directory)
67 0000-00:00:00 brk(NULL) = 0x55b968aeb000
68 0000-00:00:00 brk(0x55b968b0c000) = 0x55b968b0c000
69 0000-00:00:00 getuid() = 1234
70 0000-00:00:00 getgid() = 1234
71 0000-00:00:00 geteuid() = 1234
72 0000-00:00:00 getegid() = 1234
73 0000-00:00:00 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
74 0000-00:00:00 ioctl(-1, TIOCGPGRP, 0x7fff6b813474) = -1 EBADF (Bad
file descriptor)
75 0000-00:00:00 sysinfo({uptime=381892, loads=[21056, 38720, 49024],
totalram=8299536384, freeram=736120832, sharedram=395673600,
bufferram=273969152, totalswap=40807415808, freeswap=38982631424, procs=998,
totalhigh=0, freehigh=0, mem_unit=1}) = 0
76 0000-00:00:00 rt_sigaction(SIGCHLD, {sa_handler=SIG_DFL, sa_mask=[],
sa_flags=SA_RESTORER|SA_RESTART, sa_restorer=0x7fd6310ed5a0},
{sa_handler=SIG_DFL, sa_mask=[], sa_flags=0}, 8) = 0
77 0000-00:00:00 rt_sigaction(SIGCHLD, {sa_handler=SIG_DFL, sa_mask=[],
sa_flags=SA_RESTORER|SA_RESTART, sa_restorer=0x7fd6310ed5a0},
{sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER|SA_RESTART,
sa_restorer=0x7fd6310ed5a0}, 8) = 0
78 0000-00:00:00 rt_sigaction(SIGINT, {sa_handler=SIG_DFL, sa_mask=[],
sa_flags=SA_RESTORER, sa_restorer=0x7fd6310ed5a0}, {sa_handler=SIG_DFL,
sa_mask=[], sa_flags=0}, 8) = 0
79 0000-00:00:00 rt_sigaction(SIGINT, {sa_handler=SIG_DFL, sa_mask=[],
sa_flags=SA_RESTORER, sa_restorer=0x7fd6310ed5a0}, {sa_handler=SIG_DFL,
sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd6310ed5a0}, 8) = 0
80 0000-00:00:00 rt_sigaction(SIGQUIT, {sa_handler=SIG_DFL, sa_mask=[],
sa_flags=SA_RESTORER, sa_restorer=0x7fd6310ed5a0}, {sa_handler=SIG_DFL,
sa_mask=[], sa_flags=0}, 8) = 0
81 0000-00:00:00 rt_sigaction(SIGQUIT, {sa_handler=SIG_DFL, sa_mask=[],
sa_flags=SA_RESTORER, sa_restorer=0x7fd6310ed5a0}, {sa_handler=SIG_DFL,
sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd6310ed5a0}, 8) = 0
82 0000-00:00:00 rt_sigaction(SIGTSTP, {sa_handler=SIG_DFL, sa_mask=[],
sa_flags=SA_RESTORER|SA_NODEFER, sa_restorer=0x7fd6310ed5a0},
{sa_handler=SIG_DFL, sa_mask=[], sa_flags=0}, 8) = 0
83 0000-00:00:00 rt_sigaction(SIGTSTP, {sa_handler=SIG_DFL, sa_mask=[],
sa_flags=SA_RESTORER|SA_NODEFER, sa_restorer=0x7fd6310ed5a0},
{sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER|SA_NODEFER,
sa_restorer=0x7fd6310ed5a0}, 8) = 0
84 0000-00:00:00 rt_sigaction(SIGTTIN, {sa_handler=SIG_DFL, sa_mask=[],
sa_flags=SA_RESTORER|SA_NODEFER, sa_restorer=0x7fd6310ed5a0},
{sa_handler=SIG_DFL, sa_mask=[], sa_flags=0}, 8) = 0
85 0000-00:00:00 rt_sigaction(SIGTTIN, {sa_handler=SIG_DFL, sa_mask=[],
sa_flags=SA_RESTORER|SA_NODEFER, sa_restorer=0x7fd6310ed5a0},
{sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER|SA_NODEFER,
sa_restorer=0x7fd6310ed5a0}, 8) = 0
86 0000-00:00:00 rt_sigaction(SIGTTOU, {sa_handler=SIG_DFL, sa_mask=[],
sa_flags=SA_RESTORER|SA_NODEFER, sa_restorer=0x7fd6310ed5a0},
{sa_handler=SIG_DFL, sa_mask=[], sa_flags=0}, 8) = 0
87 0000-00:00:00 rt_sigaction(SIGTTOU, {sa_handler=SIG_DFL, sa_mask=[],
sa_flags=SA_RESTORER|SA_NODEFER, sa_restorer=0x7fd6310ed5a0},
{sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER|SA_NODEFER,
sa_restorer=0x7fd6310ed5a0}, 8) = 0
88 0000-00:00:00 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
89 0000-00:00:00 rt_sigaction(SIGQUIT, {sa_handler=SIG_IGN, sa_mask=[],
sa_flags=SA_RESTORER, sa_restorer=0x7fd6310ed5a0}, {sa_handler=SIG_DFL,
sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd6310ed5a0}, 8) = 0
90 0000-00:00:00 uname({sysname="Linux", nodename="kadath", ...}) = 0
91 0000-00:00:00 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
92 0000-00:00:00 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
93 0000-00:00:00 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
94 0000-00:00:00 stat("/home/rnturn", {st_mode=S_IFDIR|0755,
st_size=12288, ...}) = 0
95 0000-00:00:00 stat(".", {st_mode=S_IFDIR|0755, st_size=12288, ...}) = 0
96 0000-00:00:00 stat("/home", {st_mode=S_IFDIR|0755, st_size=4096, ...})
= 0
97 0000-00:00:00 stat("/home/rnturn", {st_mode=S_IFDIR|0755,
st_size=12288, ...}) = 0
98 0000-00:00:00 stat("/home/rnturn/etc/profile.d", {st_mode=S_IFDIR|0755,
st_size=4096, ...}) = 0
99 0000-00:00:00 getpid() = 17103
100 0000-00:00:00 getppid() = 17098
101 0000-00:00:00 getpid() = 17103
102 0000-00:00:00 getpgrp() = 17098
103 0000-00:00:00 ioctl(2, TIOCGPGRP, 0x7fff6b813344) = -1 ENOTTY
(Inappropriate ioctl for device)
104 0000-00:00:00 rt_sigaction(SIGCHLD, {sa_handler=0x55b9683e4c70,
sa_mask=[], sa_flags=SA_RESTORER|SA_RESTART, sa_restorer=0x7fd6310ed5a0},
{sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER|SA_RESTART,
sa_restorer=0x7fd6310ed5a0}, 8) = 0
105 0000-00:00:00 ioctl(2, TIOCGPGRP, 0x7fff6b813324) = -1 ENOTTY
(Inappropriate ioctl for device)
106 0000-00:00:00 prlimit64(0, RLIMIT_NPROC, NULL, {rlim_cur=30695,
rlim_max=30695}) = 0
107 0000-00:00:00 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
108 0000-00:00:00 openat(AT_FDCWD, "/usr/bin/oowriter", O_RDONLY) = 3
109 0000-00:00:00 stat("/usr/bin/oowriter", {st_mode=S_IFREG|0755,
st_size=63, ...}) = 0
110 0000-00:00:00 ioctl(3, TCGETS, 0x7fff6b813400) = -1 ENOTTY
(Inappropriate ioctl for device)
111 0000-00:00:00 lseek(3, 0, SEEK_CUR) = 0
112 0000-00:00:00 read(3, "#!/bin/sh\n/usr/lib64/libreoffice"..., 80) = 63
113 0000-00:00:00 lseek(3, 0, SEEK_SET) = 0
114 0000-00:00:00 prlimit64(0, RLIMIT_NOFILE, NULL, {rlim_cur=1024,
rlim_max=4*1024}) = 0
115 0000-00:00:00 fcntl(255, F_GETFD) = -1 EBADF (Bad
file descriptor)
116 0000-00:00:00 dup2(3, 255) = 255
117 0000-00:00:00 close(3) = 0
118 0000-00:00:00 fcntl(255, F_SETFD, FD_CLOEXEC) = 0
119 0000-00:00:00 fcntl(255, F_GETFL) = 0x8000 (flags
O_RDONLY|O_LARGEFILE)
120 0000-00:00:00 fstat(255, {st_mode=S_IFREG|0755, st_size=63, ...}) = 0
121 0000-00:00:00 lseek(255, 0, SEEK_CUR) = 0
122 0000-00:00:00 read(255, "#!/bin/sh\n/usr/lib64/libreoffice"..., 63) =
63
123 0000-00:00:00 rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0
124 0000-00:00:00 clone(child_stack=NULL,
flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD,
child_tidptr=0x7fd631aa3e50) = 17104
125 0000-00:00:00 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
126 0000-00:00:00 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
127 0000-00:00:00 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
128 0000-00:00:00 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
129 0000-00:00:00 rt_sigaction(SIGINT, {sa_handler=0x55b9683dfe30,
sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd6310ed5a0},
{sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER,
sa_restorer=0x7fd6310ed5a0}, 8) = 0
130 0000-00:02:36 wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0,
NULL) = 17104
131 0000-00:00:00 rt_sigaction(SIGINT, {sa_handler=SIG_DFL, sa_mask=[],
sa_flags=SA_RESTORER, sa_restorer=0x7fd6310ed5a0}, {sa_handler=0x55b9683dfe30,
sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd6310ed5a0}, 8) = 0
132 0000-00:00:00 ioctl(2, TIOCGWINSZ, 0x7fff6b8131c0) = -1 ENOTTY
(Inappropriate ioctl for device)
133 0000-00:00:00 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
134 0000-00:00:00 --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED,
si_pid=17104, si_uid=1234, si_status=0, si_utime=0, si_stime=0} ---
135 0000-00:00:00 wait4(-1, 0x7fff6b812cd0, WNOHANG, NULL) = -1 ECHILD (No
child processes)
136 0000-00:00:00 rt_sigreturn({mask=[]}) = 0
137 0000-00:00:00 read(255, "", 63) = 0
138 0000-00:00:00 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
139 0000-00:00:00 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
140 0000-00:00:00 exit_group(0) = ?
141 0000-00:00:00 +++ exited with 0 +++
142 0000-00:00:00 EOD
The timing in line 130 of the output is the problem. Launching "oocalc",
"ooimpress", etc in a similar fashion results in that same
"rt_sigaction()/wait()" to hang for roughly 2:40.
Expected Results:
Normally, launch time for oowriter is only a couple of seconds. The oowriter
window did not appear for roughly 2:40.
Reproducible: Always
User Profile Reset: No
OpenGL enabled: Yes
Additional Info:
Launch time for oowriter in only a couple of seconds.</pre>
</div>
</p>
<hr>
<span>You are receiving this mail because:</span>
<ul>
<li>You are the assignee for the bug.</li>
</ul>
</body>
</html>