<html>
<head>
<base href="https://bugs.documentfoundation.org/">
</head>
<body>
<p>
<div>
<b><a class="bz_bug_link
bz_status_UNCONFIRMED "
title="UNCONFIRMED - Could not start printer when attempting to print on Brother on Cups server"
href="https://bugs.documentfoundation.org/show_bug.cgi?id=129146#c19">Comment # 19</a>
on <a class="bz_bug_link
bz_status_UNCONFIRMED "
title="UNCONFIRMED - Could not start printer when attempting to print on Brother on Cups server"
href="https://bugs.documentfoundation.org/show_bug.cgi?id=129146">bug 129146</a>
from <span class="vcard"><a class="email" href="mailto:kurt.sanger@ksanger.com" title="KSanger <kurt.sanger@ksanger.com>"> <span class="fn">KSanger</span></a>
</span></b>
<pre>Had to change selinux after copying over the edited cupsd.conf file.
Many messages in the journal.
I believe this is one full request to print from LibreWrite. I belive this is
one full print cycle from LibreWrite using the command "journalctl -u cups -r".
The error is at Sep 22 11:23:05 wart cupsd[3552]: Brother_HL_2270DW_kurts_pi:
PPD creation failed: Printer does not support required IPP attributes >
Sep 22 11:23:08 wart cupsd[3552]: [Client 33] Flushing write buffer.
Sep 22 11:23:08 wart cupsd[3552]: [Client 33] bytes=0, http_state=0,
data_remaining=98
Sep 22 11:23:08 wart cupsd[3552]: [Client 33] Writing IPP response,
ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
Sep 22 11:23:08 wart cupsd[3552]: [Client 33] cupsdWriteClient error=0, used=0,
state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCOD>
Sep 22 11:23:08 wart cupsd[3552]: [Client 33] con->http=0x55c9546c22e0
Sep 22 11:23:08 wart cupsd[3552]: [Client 33] cupsdSendHeader: code=200,
type="application/ipp", auth_type=0
Sep 22 11:23:08 wart cupsd[3552]: [Client 33] Content-Length: 98
Sep 22 11:23:08 wart cupsd[3552]: [Client 33] Returning IPP successful-ok for
Get-Printer-Attributes (ipp://localhost/printers/Broth>
Sep 22 11:23:08 wart cupsd[3552]: Get-Printer-Attributes
ipp://localhost/printers/Brother_HL_2270DW_kurts_pi
Sep 22 11:23:08 wart cupsd[3552]: [Client 33] 2.0 Get-Printer-Attributes 98
Sep 22 11:23:08 wart cupsd[3552]: [Client 33] No authentication data provided.
Sep 22 11:23:08 wart cupsd[3552]: [Client 33] Read: status=200, state=6
Sep 22 11:23:08 wart cupsd[3552]: cupsdSetBusyState: newbusy="Active clients
and dirty files", busy="Dirty files"
Sep 22 11:23:08 wart cupsd[3552]: [Client 33] POST / HTTP/1.1
Sep 22 11:23:07 wart cupsd[3552]: cupsdSetBusyState: newbusy="Dirty files",
busy="Active clients and dirty files"
Sep 22 11:23:07 wart cupsd[3552]: [Client 33] Waiting for request.
Sep 22 11:23:07 wart cupsd[3552]: [Client 33] New state is HTTP_STATE_WAITING
Sep 22 11:23:07 wart cupsd[3552]: [Client 33] Flushing write buffer.
Sep 22 11:23:07 wart cupsd[3552]: [Client 33] bytes=0, http_state=0,
data_remaining=98
Sep 22 11:23:07 wart cupsd[3552]: [Client 33] Writing IPP response,
ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
Sep 22 11:23:07 wart cupsd[3552]: [Client 33] cupsdWriteClient error=0, used=0,
state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCOD>
Sep 22 11:23:07 wart cupsd[3552]: [Client 33] con->http=0x55c9546c22e0
Sep 22 11:23:07 wart cupsd[3552]: [Client 33] cupsdSendHeader: code=200,
type="application/ipp", auth_type=0
Sep 22 11:23:07 wart cupsd[3552]: [Client 33] Content-Length: 98
Sep 22 11:23:07 wart cupsd[3552]: [Client 33] Returning IPP successful-ok for
Get-Printer-Attributes (ipp://localhost/printers/Broth>
Sep 22 11:23:07 wart cupsd[3552]: Get-Printer-Attributes
ipp://localhost/printers/Brother_HL_2270DW_kurts_pi
Sep 22 11:23:07 wart cupsd[3552]: [Client 33] 2.0 Get-Printer-Attributes 97
Sep 22 11:23:07 wart cupsd[3552]: [Client 33] No authentication data provided.
Sep 22 11:23:07 wart cupsd[3552]: [Client 33] Read: status=200, state=6
Sep 22 11:23:07 wart cupsd[3552]: cupsdSetBusyState: newbusy="Active clients
and dirty files", busy="Dirty files"
Sep 22 11:23:07 wart cupsd[3552]: [Client 33] POST / HTTP/1.1
Sep 22 11:23:06 wart cupsd[3552]: cupsdSetBusyState: newbusy="Dirty files",
busy="Active clients and dirty files"
Sep 22 11:23:06 wart cupsd[3552]: [Client 33] Waiting for request.
Sep 22 11:23:06 wart cupsd[3552]: [Client 33] New state is HTTP_STATE_WAITING
Sep 22 11:23:06 wart cupsd[3552]: [Client 33] Flushing write buffer.
Sep 22 11:23:06 wart cupsd[3552]: [Client 33] bytes=0, http_state=0,
data_remaining=98
Sep 22 11:23:06 wart cupsd[3552]: [Client 33] Writing IPP response,
ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
Sep 22 11:23:06 wart cupsd[3552]: [Client 33] cupsdWriteClient error=0, used=0,
state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCOD>
Sep 22 11:23:06 wart cupsd[3552]: [Client 33] con->http=0x55c9546c22e0
Sep 22 11:23:06 wart cupsd[3552]: [Client 33] cupsdSendHeader: code=200,
type="application/ipp", auth_type=0
Sep 22 11:23:06 wart cupsd[3552]: [Client 33] Content-Length: 98
Sep 22 11:23:06 wart cupsd[3552]: [Client 33] Returning IPP successful-ok for
Get-Printer-Attributes (ipp://localhost/printers/Broth>
Sep 22 11:23:06 wart cupsd[3552]: Get-Printer-Attributes
ipp://localhost/printers/Brother_HL_2270DW_kurts_pi
Sep 22 11:23:06 wart cupsd[3552]: [Client 33] 2.0 Get-Printer-Attributes 96
Sep 22 11:23:06 wart cupsd[3552]: [Client 33] No authentication data provided.
Sep 22 11:23:06 wart cupsd[3552]: [Client 33] Read: status=200, state=6
Sep 22 11:23:06 wart cupsd[3552]: cupsdSetBusyState: newbusy="Active clients
and dirty files", busy="Dirty files"
Sep 22 11:23:06 wart cupsd[3552]: [Client 33] POST / HTTP/1.1
Sep 22 11:23:05 wart cupsd[3552]: Brother_HL_2270DW_kurts_pi: PPD creation
failed: Printer does not support required IPP attributes >
Sep 22 11:23:05 wart cupsd[3552]: Brother_HL_2270DW_kurts_pi:
Get-Printer-Attributes returned successful-ok (successful-ok)
Sep 22 11:23:05 wart cupsd[3552]: Brother_HL_2270DW_kurts_pi: Connected to
kurts-pi.local:631, sending Get-Printer-Attributes reques>
Sep 22 11:23:05 wart cupsd[3552]: cupsdSetBusyState: newbusy="Dirty files",
busy="Active clients and dirty files"
Sep 22 11:23:05 wart cupsd[3552]: [Client 33] Waiting for request.
Sep 22 11:23:05 wart cupsd[3552]: [Client 33] New state is HTTP_STATE_WAITING
Sep 22 11:23:05 wart cupsd[3552]: [Client 33] Flushing write buffer.
Sep 22 11:23:05 wart cupsd[3552]: REQUEST localhost - - "POST / HTTP/1.1" 200
298 CUPS-Create-Local-Printer successful-ok
Sep 22 11:23:05 wart cupsd[3552]: Brother_HL_2270DW_kurts_pi: Generating PPD
file from "ipp://kurts-pi.local:631/printers/Brother_HL>
Sep 22 11:23:05 wart cupsd[3552]: [Client 33] bytes=0, http_state=0,
data_remaining=277
Sep 22 11:23:05 wart cupsd[3552]: [Client 33] Writing IPP response,
ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
Sep 22 11:23:05 wart cupsd[3552]: [Client 33] cupsdWriteClient error=0, used=0,
state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCOD>
Sep 22 11:23:05 wart cupsd[3552]: [Client 33] con->http=0x55c9546c22e0
Sep 22 11:23:05 wart cupsd[3552]: [Client 33] cupsdSendHeader: code=200,
type="application/ipp", auth_type=0
Sep 22 11:23:05 wart cupsd[3552]: [Client 33] Content-Length: 277
Sep 22 11:23:05 wart cupsd[3552]: [Client 33] Returning IPP successful-ok for
CUPS-Create-Local-Printer (ipp://localhost/) from loca>
Sep 22 11:23:05 wart cupsd[3552]: CUPS-Create-Local-Printer successful-ok:
Local printer created.
Sep 22 11:23:05 wart cupsd[3552]:
cupsdRegisterPrinter(p=0x55c95461b1d0(Brother_HL_2270DW_kurts_pi))
Sep 22 11:23:05 wart cupsd[3552]: load_ppd: Loading
/etc/cups/ppd/Brother_HL_2270DW_kurts_pi.ppd...
Sep 22 11:23:05 wart cupsd[3552]: cupsdSetBusyState: newbusy="Active clients
and dirty files", busy="Active clients"
Sep 22 11:23:05 wart cupsd[3552]: cupsdMarkDirty(P----)
Sep 22 11:23:05 wart cupsd[3552]: CUPS-Create-Local-Printer ipp://localhost/
Sep 22 11:23:05 wart cupsd[3552]: [Client 33] 2.0 CUPS-Create-Local-Printer 95
Sep 22 11:23:05 wart cupsd[3552]: [Client 33] Read: status=100, state=6
Sep 22 11:23:05 wart cupsd[3552]: [Client 33] Read: status=100, state=6
Sep 22 11:23:05 wart cupsd[3552]: [Client 33] Read: status=100, state=6
Sep 22 11:23:05 wart cupsd[3552]: [Client 33] Read: status=100, state=6
Sep 22 11:23:05 wart cupsd[3552]: [Client 33] Read: status=100, state=6
Sep 22 11:23:05 wart cupsd[3552]: [Client 33] Read: status=100, state=6
Sep 22 11:23:05 wart cupsd[3552]: [Client 33] Read: status=100, state=6
Sep 22 11:23:05 wart cupsd[3552]: [Client 33] Read: status=100, state=6
Sep 22 11:23:05 wart cupsd[3552]: [Client 33] Read: status=100, state=6
Sep 22 11:23:05 wart cupsd[3552]: [Client 33] No authentication data provided.
Sep 22 11:23:05 wart cupsd[3552]: [Client 33] Read: status=200, state=6
Sep 22 11:23:05 wart cupsd[3552]: cupsdSetBusyState: newbusy="Active clients",
busy="Active clients"
Sep 22 11:23:05 wart cupsd[3552]: [Client 33] POST / HTTP/1.1
Sep 22 11:23:05 wart cupsd[3552]: [Client 33] Waiting for request.
Sep 22 11:23:05 wart cupsd[3552]: [Client 33] Accepted from localhost (Domain)
Sep 22 11:23:05 wart cupsd[3552]: [Client 33] Server address is
"/run/cups/cups.sock".
Sep 22 11:23:05 wart cupsd[3552]: cupsdSetBusyState: newbusy="Active clients",
busy="Not busy"
Sep 22 11:23:05 wart cupsd[3552]: cupsdSetBusyState: newbusy="Not busy",
busy="Active clients"
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] Waiting for request.
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] New state is HTTP_STATE_WAITING
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] Flushing write buffer.
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] bytes=0, http_state=0,
data_remaining=116
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] Writing IPP response,
ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] cupsdWriteClient error=0, used=0,
state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCOD>
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] con->http=0x55c954633620
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] cupsdSendHeader: code=200,
type="application/ipp", auth_type=0
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] Content-Length: 116
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] Returning IPP
client-error-not-found for CUPS-Get-Printers (no URI) from localhost.
Sep 22 11:23:05 wart cupsd[3552]: CUPS-Get-Printers client-error-not-found: No
destinations added.
Sep 22 11:23:05 wart cupsd[3552]: CUPS-Get-Printers
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] 2.0 CUPS-Get-Printers 94
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] No authentication data provided.
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] Read: status=200, state=6
Sep 22 11:23:05 wart cupsd[3552]: cupsdSetBusyState: newbusy="Active clients",
busy="Not busy"
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] POST / HTTP/1.1
Sep 22 11:23:05 wart cupsd[3552]: cupsdSetBusyState: newbusy="Not busy",
busy="Active clients"
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] Waiting for request.
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] New state is HTTP_STATE_WAITING
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] Flushing write buffer.
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] bytes=0, http_state=0,
data_remaining=113
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] Writing IPP response,
ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] cupsdWriteClient error=0, used=0,
state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCOD>
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] con->http=0x55c954633620
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] cupsdSendHeader: code=200,
type="application/ipp", auth_type=0
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] Content-Length: 113
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] Returning IPP
client-error-not-found for CUPS-Get-Default (no URI) from localhost.
Sep 22 11:23:05 wart cupsd[3552]: CUPS-Get-Default client-error-not-found: No
default printer.
Sep 22 11:23:05 wart cupsd[3552]: CUPS-Get-Default
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] 2.0 CUPS-Get-Default 93
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] No authentication data provided.
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] Read: status=200, state=6
Sep 22 11:23:05 wart cupsd[3552]: cupsdSetBusyState: newbusy="Active clients",
busy="Not busy"
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] POST / HTTP/1.1
Sep 22 11:23:05 wart cupsd[3552]: cupsdSetBusyState: newbusy="Not busy",
busy="Active clients"
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] Waiting for request.
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] New state is HTTP_STATE_WAITING
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] Flushing write buffer.
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] bytes=0, http_state=0,
data_remaining=130
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] Writing IPP response,
ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] cupsdWriteClient error=0, used=0,
state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCOD>
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] con->http=0x55c954633620
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] cupsdSendHeader: code=200,
type="application/ipp", auth_type=0
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] Content-Length: 130
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] Returning IPP
client-error-not-found for Get-Printer-Attributes (ipp://localhost:631/p>
Sep 22 11:23:05 wart cupsd[3552]: Get-Printer-Attributes
client-error-not-found: The printer or class does not exist.
Sep 22 11:23:05 wart cupsd[3552]: Get-Printer-Attributes
ipp://localhost:631/printers/Brother_HL_2270DW_kurts_pi
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] 2.0 Get-Printer-Attributes 92
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] No authentication data provided.
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] Read: status=200, state=6
Sep 22 11:23:05 wart cupsd[3552]: cupsdSetBusyState: newbusy="Active clients",
busy="Not busy"
Sep 22 11:23:05 wart cupsd[3552]: [Client 23] POST / HTTP/1.1
Sep 22 11:23:05 wart cupsd[3552]: cupsdSetBusyState: newbusy="Not busy",
busy="Not busy"
Sep 22 11:23:05 wart cupsd[3552]: [Client 32] Closing connection.
Sep 22 11:23:05 wart cupsd[3552]: [Client 32] HTTP_STATE_WAITING Closing for
error 32 (Broken pipe)
Sep 22 11:23:05 wart cupsd[3552]: cupsdSetBusyState: newbusy="Not busy",
busy="Active clients"
Sep 22 11:23:05 wart cupsd[3552]: [Client 32] Waiting for request.
Sep 22 11:23:05 wart cupsd[3552]: [Client 32] New state is HTTP_STATE_WAITING
Sep 22 11:23:05 wart cupsd[3552]: [Client 32] Flushing write buffer.
Sep 22 11:23:05 wart cupsd[3552]: [Client 32] bytes=0, http_state=0,
data_remaining=130
Sep 22 11:23:05 wart cupsd[3552]: [Client 32] Writing IPP response,
ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
Sep 22 11:23:05 wart cupsd[3552]: [Client 32] cupsdWriteClient error=0, used=0,
state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCOD>
Sep 22 11:23:05 wart cupsd[3552]: [Client 32] con->http=0x55c9546c22e0
Sep 22 11:23:05 wart cupsd[3552]: [Client 32] cupsdSendHeader: code=200,
type="application/ipp", auth_type=0
Sep 22 11:23:05 wart cupsd[3552]: [Client 32] Content-Length: 130
Sep 22 11:23:05 wart cupsd[3552]: [Client 32] Returning IPP
client-error-not-found for Get-Printer-Attributes (ipp://localhost/print>
Sep 22 11:23:05 wart cupsd[3552]: Get-Printer-Attributes
client-error-not-found: The printer or class does not exist.
Sep 22 11:23:05 wart cupsd[3552]: Get-Printer-Attributes
ipp://localhost/printers/Brother_HL_2270DW_kurts_pi
Sep 22 11:23:05 wart cupsd[3552]: [Client 32] 2.0 Get-Printer-Attributes 91
Sep 22 11:23:05 wart cupsd[3552]: [Client 32] No authentication data provided.
Sep 22 11:23:05 wart cupsd[3552]: [Client 32] Read: status=200, state=6
Sep 22 11:23:05 wart cupsd[3552]: cupsdSetBusyState: newbusy="Active clients",
busy="Active clients"
Sep 22 11:23:05 wart cupsd[3552]: [Client 32] POST
/printers/Brother_HL_2270DW_kurts_pi HTTP/1.1
Sep 22 11:23:05 wart cupsd[3552]: [Client 32] Waiting for request.
Sep 22 11:23:05 wart cupsd[3552]: [Client 32] Accepted from localhost (Domain)
Sep 22 11:23:05 wart cupsd[3552]: [Client 32] Server address is
"/run/cups/cups.sock".
Sep 22 11:23:05 wart cupsd[3552]: cupsdSetBusyState: newbusy="Active clients",
busy="Not busy"
Sep 22 11:23:05 wart cupsd[3552]: cupsdSetBusyState: newbusy="Not busy",
busy="Not busy"
Sep 22 11:23:05 wart cupsd[3552]: [Client 31] Closing connection.
Sep 22 11:23:05 wart cupsd[3552]: [Client 31] HTTP_STATE_WAITING Closing for
error 32 (Broken pipe)
Sep 22 11:23:05 wart cupsd[3552]: cupsdSetBusyState: newbusy="Not busy",
busy="Active clients"
Sep 22 11:23:05 wart cupsd[3552]: [Client 31] Waiting for request.
Sep 22 11:23:05 wart cupsd[3552]: [Client 31] New state is HTTP_STATE_WAITING
Sep 22 11:23:05 wart cupsd[3552]: [Client 31] Flushing write buffer.
Sep 22 11:23:05 wart cupsd[3552]: [Client 31] bytes=0, http_state=0,
data_remaining=130
Sep 22 11:23:05 wart cupsd[3552]: [Client 31] Writing IPP response,
ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
Sep 22 11:23:05 wart cupsd[3552]: [Client 31] cupsdWriteClient error=0, used=0,
state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCOD>
Sep 22 11:23:05 wart cupsd[3552]: [Client 31] con->http=0x55c9546c22e0
Sep 22 11:23:05 wart cupsd[3552]: [Client 31] cupsdSendHeader: code=200,
type="application/ipp", auth_type=0
Sep 22 11:23:05 wart cupsd[3552]: [Client 31] Content-Length: 130
Sep 22 11:23:05 wart cupsd[3552]: [Client 31] Returning IPP
client-error-not-found for Get-Printer-Attributes (ipp://localhost/print>
Sep 22 11:23:05 wart cupsd[3552]: Get-Printer-Attributes
client-error-not-found: The printer or class does not exist.
Sep 22 11:23:05 wart cupsd[3552]: Get-Printer-Attributes
ipp://localhost/printers/Brother_HL_2270DW_kurts_pi
Sep 22 11:23:05 wart cupsd[3552]: [Client 31] 2.0 Get-Printer-Attributes 90
Sep 22 11:23:05 wart cupsd[3552]: [Client 31] No authentication data provided.
Sep 22 11:23:05 wart cupsd[3552]: [Client 31] Read: status=200, state=6
Sep 22 11:23:05 wart cupsd[3552]: cupsdSetBusyState: newbusy="Active clients",
busy="Active clients"
Sep 22 11:23:05 wart cupsd[3552]: [Client 31] POST
/printers/Brother_HL_2270DW_kurts_pi HTTP/1.1
Sep 22 11:23:05 wart cupsd[3552]: [Client 31] Waiting for request.
Sep 22 11:23:05 wart cupsd[3552]: [Client 31] Accepted from localhost (Domain)
Sep 22 11:23:05 wart cupsd[3552]: [Client 31] Server address is
"/run/cups/cups.sock".
Sep 22 11:23:05 wart cupsd[3552]: cupsdSetBusyState: newbusy="Active clients",
busy="Not busy"
Sep 22 11:23:05 wart cupsd[3552]: cupsdSetBusyState: newbusy="Not busy",
busy="Not busy"
Sep 22 11:23:05 wart cupsd[3552]: [Client 30] Closing connection.
Sep 22 11:23:05 wart cupsd[3552]: [Client 30] HTTP_STATE_WAITING Closing for
error 32 (Broken pipe)
Sep 22 11:23:05 wart cupsd[3552]: cupsdSetBusyState: newbusy="Not busy",
busy="Active clients"
Sep 22 11:23:05 wart cupsd[3552]: [Client 30] Waiting for request.
Sep 22 11:23:05 wart cupsd[3552]: [Client 30] New state is HTTP_STATE_WAITING
Sep 22 11:23:05 wart cupsd[3552]: [Client 30] Flushing write buffer.
Sep 22 11:23:05 wart cupsd[3552]: [Client 30] bytes=0, http_state=0,
data_remaining=130
Sep 22 11:23:05 wart cupsd[3552]: [Client 30] Writing IPP response,
ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
Sep 22 11:23:05 wart cupsd[3552]: [Client 30] cupsdWriteClient error=0, used=0,
state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCOD>
Sep 22 11:23:05 wart cupsd[3552]: [Client 30] con->http=0x55c9546c22e0
Sep 22 11:23:05 wart cupsd[3552]: [Client 30] cupsdSendHeader: code=200,
type="application/ipp", auth_type=0
Sep 22 11:23:05 wart cupsd[3552]: [Client 30] Content-Length: 130
Sep 22 11:23:05 wart cupsd[3552]: [Client 30] Returning IPP
client-error-not-found for Get-Printer-Attributes (ipp://localhost/print>
Sep 22 11:23:05 wart cupsd[3552]: Get-Printer-Attributes
client-error-not-found: The printer or class does not exist.
Sep 22 11:23:05 wart cupsd[3552]: Get-Printer-Attributes
ipp://localhost/printers/Brother_HL_2270DW_kurts_pi
Sep 22 11:23:05 wart cupsd[3552]: [Client 30] 2.0 Get-Printer-Attributes 89
Sep 22 11:23:05 wart cupsd[3552]: [Client 30] No authentication data provided.
Sep 22 11:23:05 wart cupsd[3552]: [Client 30] Read: status=200, state=6
Sep 22 11:23:05 wart cupsd[3552]: cupsdSetBusyState: newbusy="Active clients",
busy="Active clients"
Sep 22 11:23:05 wart cupsd[3552]: [Client 30] POST
/printers/Brother_HL_2270DW_kurts_pi HTTP/1.1
Sep 22 11:23:05 wart cupsd[3552]: [Client 30] Waiting for request.
Sep 22 11:23:05 wart cupsd[3552]: [Client 30] Accepted from localhost (Domain)
Sep 22 11:23:05 wart cupsd[3552]: [Client 30] Server address is
"/run/cups/cups.sock".
Sep 22 11:23:05 wart cupsd[3552]: cupsdSetBusyState: newbusy="Active clients",
busy="Not busy"
Sep 22 11:23:05 wart cupsd[3552]: cupsdSetBusyState: newbusy="Not busy",
busy="Not busy"
Sep 22 11:23:05 wart cupsd[3552]: [Client 29] Closing connection.
Sep 22 11:23:05 wart cupsd[3552]: [Client 29] HTTP_STATE_WAITING Closing for
error 32 (Broken pipe)
Sep 22 11:23:05 wart cupsd[3552]: cupsdSetBusyState: newbusy="Not busy",
busy="Active clients"
Sep 22 11:23:05 wart cupsd[3552]: [Client 29] Waiting for request.
Sep 22 11:23:05 wart cupsd[3552]: [Client 29] New state is HTTP_STATE_WAITING
Sep 22 11:23:05 wart cupsd[3552]: [Client 29] Flushing write buffer.
Sep 22 11:23:05 wart cupsd[3552]: [Client 29] bytes=0, http_state=0,
data_remaining=130
Sep 22 11:23:05 wart cupsd[3552]: [Client 29] Writing IPP response,
ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
Sep 22 11:23:05 wart cupsd[3552]: [Client 29] cupsdWriteClient error=0, used=0,
state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCOD>
Sep 22 11:23:05 wart cupsd[3552]: [Client 29] con->http=0x55c9546c22e0
Sep 22 11:23:05 wart cupsd[3552]: [Client 29] cupsdSendHeader: code=200,
type="application/ipp", auth_type=0
Sep 22 11:23:05 wart cupsd[3552]: [Client 29] Content-Length: 130
Sep 22 11:23:05 wart cupsd[3552]: [Client 29] Returning IPP
client-error-not-found for Get-Printer-Attributes (ipp://localhost/print>
Sep 22 11:23:05 wart cupsd[3552]: Get-Printer-Attributes
client-error-not-found: The printer or class does not exist.
Sep 22 11:23:05 wart cupsd[3552]: Get-Printer-Attributes
ipp://localhost/printers/Brother_HL_2270DW_kurts_pi
Sep 22 11:23:05 wart cupsd[3552]: [Client 29] 2.0 Get-Printer-Attributes 88
Sep 22 11:23:05 wart cupsd[3552]: [Client 29] No authentication data provided.
Sep 22 11:23:05 wart cupsd[3552]: [Client 29] Read: status=200, state=6
Sep 22 11:23:05 wart cupsd[3552]: cupsdSetBusyState: newbusy="Active clients",
busy="Active clients"
Sep 22 11:23:05 wart cupsd[3552]: [Client 29] POST
/printers/Brother_HL_2270DW_kurts_pi HTTP/1.1
Sep 22 11:23:05 wart cupsd[3552]: [Client 29] Waiting for request.
Sep 22 11:23:05 wart cupsd[3552]: [Client 29] Accepted from localhost (Domain)
Sep 22 11:23:05 wart cupsd[3552]: [Client 29] Server address is
"/run/cups/cups.sock".
Sep 22 11:23:05 wart cupsd[3552]: cupsdSetBusyState: newbusy="Active clients",
busy="Not busy"
Sep 22 11:22:41 wart cupsd[3552]: cupsdSetBusyState: newbusy="Not busy",
busy="Not busy"
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] Closing connection.
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] HTTP_STATE_WAITING Closing for
error 32 (Broken pipe)
Sep 22 11:22:41 wart cupsd[3552]: cupsdSetBusyState: newbusy="Not busy",
busy="Active clients"
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] Waiting for request.
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] New state is HTTP_STATE_WAITING
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] Flushing write buffer.
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] bytes=0, http_state=0,
data_remaining=116
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] Writing IPP response,
ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] cupsdWriteClient error=0, used=0,
state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCOD>
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] con->http=0x55c9546c22e0
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] cupsdSendHeader: code=200,
type="application/ipp", auth_type=0
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] Content-Length: 116
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] Returning IPP
client-error-not-found for CUPS-Get-Printers (no URI) from localhost.
Sep 22 11:22:41 wart cupsd[3552]: CUPS-Get-Printers client-error-not-found: No
destinations added.
Sep 22 11:22:41 wart cupsd[3552]: CUPS-Get-Printers
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] 2.0 CUPS-Get-Printers 87
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] No authentication data provided.
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] Read: status=200, state=6
Sep 22 11:22:41 wart cupsd[3552]: cupsdSetBusyState: newbusy="Active clients",
busy="Not busy"
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] POST / HTTP/1.1
Sep 22 11:22:41 wart cupsd[3552]: cupsdSetBusyState: newbusy="Not busy",
busy="Active clients"
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] Waiting for request.
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] New state is HTTP_STATE_WAITING
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] Flushing write buffer.
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] bytes=0, http_state=0,
data_remaining=113
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] Writing IPP response,
ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] cupsdWriteClient error=0, used=0,
state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCOD>
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] con->http=0x55c9546c22e0
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] cupsdSendHeader: code=200,
type="application/ipp", auth_type=0
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] Content-Length: 113
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] Returning IPP
client-error-not-found for CUPS-Get-Default (no URI) from localhost.
Sep 22 11:22:41 wart cupsd[3552]: CUPS-Get-Default client-error-not-found: No
default printer.
Sep 22 11:22:41 wart cupsd[3552]: CUPS-Get-Default
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] 2.0 CUPS-Get-Default 86
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] No authentication data provided.
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] Read: status=200, state=6
Sep 22 11:22:41 wart cupsd[3552]: cupsdSetBusyState: newbusy="Active clients",
busy="Active clients"
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] POST / HTTP/1.1
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] Waiting for request.
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] Accepted from localhost (Domain)
Sep 22 11:22:41 wart cupsd[3552]: [Client 28] Server address is
"/run/cups/cups.sock".
Sep 22 11:22:41 wart cupsd[3552]: cupsdSetBusyState: newbusy="Active clients",
busy="Not busy"
Sep 22 11:22:41 wart cupsd[3552]: cupsdSetBusyState: newbusy="Not busy",
busy="Not busy"
Sep 22 11:22:41 wart cupsd[3552]: [Client 27] Closing connection.
Sep 22 11:22:41 wart cupsd[3552]: [Client 27] HTTP_STATE_WAITING Closing for
error 32 (Broken pipe)
Sep 22 11:22:41 wart cupsd[3552]: cupsdSetBusyState: newbusy="Not busy",
busy="Active clients"
Sep 22 11:22:41 wart cupsd[3552]: [Client 27] Waiting for request.
Sep 22 11:22:41 wart cupsd[3552]: [Client 27] New state is HTTP_STATE_WAITING
Sep 22 11:22:41 wart cupsd[3552]: [Client 27] Flushing write buffer.
Sep 22 11:22:41 wart cupsd[3552]: [Client 27] bytes=0, http_state=0,
data_remaining=130
Sep 22 11:22:41 wart cupsd[3552]: [Client 27] Writing IPP response,
ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
Sep 22 11:22:41 wart cupsd[3552]: [Client 27] cupsdWriteClient error=0, used=0,
state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCOD>
Sep 22 11:22:41 wart cupsd[3552]: [Client 27] con->http=0x55c9546c22e0
Sep 22 11:22:41 wart cupsd[3552]: [Client 27] cupsdSendHeader: code=200,
type="application/ipp", auth_type=0
Sep 22 11:22:41 wart cupsd[3552]: [Client 27] Content-Length: 130
Sep 22 11:22:41 wart cupsd[3552]: [Client 27] Returning IPP
client-error-not-found for Get-Printer-Attributes (ipp://localhost/print>
Sep 22 11:22:41 wart cupsd[3552]: Get-Printer-Attributes
client-error-not-found: The printer or class does not exist.
Sep 22 11:22:41 wart cupsd[3552]: Get-Printer-Attributes
ipp://localhost/printers/Brother_HL_2270DW_kurts_pi
Sep 22 11:22:41 wart cupsd[3552]: [Client 27] 2.0 Get-Printer-Attributes 85
Sep 22 11:22:41 wart cupsd[3552]: [Client 27] No authentication data provided.
Sep 22 11:22:41 wart cupsd[3552]: [Client 27] Read: status=200, state=6
Sep 22 11:22:41 wart cupsd[3552]: cupsdSetBusyState: newbusy="Active clients",
busy="Active clients"
Sep 22 11:22:41 wart cupsd[3552]: [Client 27] POST
/printers/Brother_HL_2270DW_kurts_pi HTTP/1.1
Sep 22 11:22:41 wart cupsd[3552]: [Client 27] Waiting for request.
Sep 22 11:22:41 wart cupsd[3552]: [Client 27] Accepted from localhost (Domain)
Sep 22 11:22:41 wart cupsd[3552]: [Client 27] Server address is
"/run/cups/cups.sock".
Sep 22 11:22:41 wart cupsd[3552]: cupsdSetBusyState: newbusy="Active clients",
busy="Not busy"
Sep 22 11:22:41 wart cupsd[3552]: cupsdSetBusyState: newbusy="Not busy",
busy="Not busy"
Sep 22 11:22:41 wart cupsd[3552]: [Client 26] Closing connection.
Sep 22 11:22:41 wart cupsd[3552]: [Client 26] HTTP_STATE_WAITING Closing for
error 32 (Broken pipe)
Sep 22 11:22:41 wart cupsd[3552]: cupsdSetBusyState: newbusy="Not busy",
busy="Active clients"
Sep 22 11:22:41 wart cupsd[3552]: [Client 26] Waiting for request.
Sep 22 11:22:41 wart cupsd[3552]: [Client 26] New state is HTTP_STATE_WAITING
Sep 22 11:22:41 wart cupsd[3552]: [Client 26] Flushing write buffer.
Sep 22 11:22:41 wart cupsd[3552]: [Client 26] bytes=0, http_state=0,
data_remaining=130
Sep 22 11:22:41 wart cupsd[3552]: [Client 26] Writing IPP response,
ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
Sep 22 11:22:41 wart cupsd[3552]: [Client 26] cupsdWriteClient error=0, used=0,
state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCOD>
Sep 22 11:22:41 wart cupsd[3552]: [Client 26] con->http=0x55c9546c22e0
Sep 22 11:22:41 wart cupsd[3552]: [Client 26] cupsdSendHeader: code=200,
type="application/ipp", auth_type=0
Sep 22 11:22:41 wart cupsd[3552]: [Client 26] Content-Length: 130
Sep 22 11:22:41 wart cupsd[3552]: [Client 26] Returning IPP
client-error-not-found for Get-Printer-Attributes (ipp://localhost/print>
Sep 22 11:22:41 wart cupsd[3552]: Get-Printer-Attributes
client-error-not-found: The printer or class does not exist.
Sep 22 11:22:41 wart cupsd[3552]: Get-Printer-Attributes
ipp://localhost/printers/Brother_HL_2270DW_kurts_pi
Sep 22 11:22:41 wart cupsd[3552]: [Client 26] 2.0 Get-Printer-Attributes 84
Sep 22 11:22:41 wart cupsd[3552]: [Client 26] No authentication data provided.
Sep 22 11:22:41 wart cupsd[3552]: [Client 26] Read: status=200, state=6
Sep 22 11:22:41 wart cupsd[3552]: cupsdSetBusyState: newbusy="Active clients",
busy="Active clients"
Sep 22 11:22:41 wart cupsd[3552]: [Client 26] POST
/printers/Brother_HL_2270DW_kurts_pi HTTP/1.1
Sep 22 11:22:41 wart cupsd[3552]: [Client 26] Waiting for request.
Sep 22 11:22:41 wart cupsd[3552]: [Client 26] Accepted from localhost (Domain)
Sep 22 11:22:41 wart cupsd[3552]: [Client 26] Server address is
"/run/cups/cups.sock".
Sep 22 11:22:41 wart cupsd[3552]: cupsdSetBusyState: newbusy="Active clients",
busy="Not busy"
Sep 22 11:22:41 wart cupsd[3552]: cupsdSetBusyState: newbusy="Not busy",
busy="Not busy"
Sep 22 11:22:41 wart cupsd[3552]: [Client 25] Closing connection.
Sep 22 11:22:41 wart cupsd[3552]: [Client 25] HTTP_STATE_WAITING Closing for
error 32 (Broken pipe)
Sep 22 11:22:41 wart cupsd[3552]: cupsdSetBusyState: newbusy="Not busy",
busy="Active clients"
Sep 22 11:22:41 wart cupsd[3552]: [Client 25] Waiting for request.
Sep 22 11:22:41 wart cupsd[3552]: [Client 25] New state is HTTP_STATE_WAITING
Sep 22 11:22:41 wart cupsd[3552]: [Client 25] Flushing write buffer.
Sep 22 11:22:41 wart cupsd[3552]: [Client 25] bytes=0, http_state=0,
data_remaining=130
Sep 22 11:22:41 wart cupsd[3552]: [Client 25] Writing IPP response,
ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
Sep 22 11:22:41 wart cupsd[3552]: [Client 25] cupsdWriteClient error=0, used=0,
state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCOD>
Sep 22 11:22:41 wart cupsd[3552]: [Client 25] con->http=0x55c9546c22e0
Sep 22 11:22:41 wart cupsd[3552]: [Client 25] cupsdSendHeader: code=200,
type="application/ipp", auth_type=0
Sep 22 11:22:41 wart cupsd[3552]: [Client 25] Content-Length: 130
Sep 22 11:22:41 wart cupsd[3552]: [Client 25] Returning IPP
client-error-not-found for Get-Printer-Attributes (ipp://localhost/print>
Sep 22 11:22:41 wart cupsd[3552]: Get-Printer-Attributes
client-error-not-found: The printer or class does not exist.
Sep 22 11:22:41 wart cupsd[3552]: Get-Printer-Attributes
ipp://localhost/printers/Brother_HL_2270DW_kurts_pi
Sep 22 11:22:41 wart cupsd[3552]: [Client 25] 2.0 Get-Printer-Attributes 83
Sep 22 11:22:41 wart cupsd[3552]: [Client 25] No authentication data provided.
Sep 22 11:22:41 wart cupsd[3552]: [Client 25] Read: status=200, state=6
Sep 22 11:22:41 wart cupsd[3552]: cupsdSetBusyState: newbusy="Active clients",
busy="Active clients"
Sep 22 11:22:41 wart cupsd[3552]: [Client 25] POST
/printers/Brother_HL_2270DW_kurts_pi HTTP/1.1
Sep 22 11:22:41 wart cupsd[3552]: Report: stringpool-total-bytes=41096
Sep 22 11:22:41 wart cupsd[3552]: Report: stringpool-alloc-bytes=6208
Sep 22 11:22:41 wart cupsd[3552]: Report: stringpool-string-count=2174
Sep 22 11:22:41 wart cupsd[3552]: Report: printers=0
Sep 22 11:22:41 wart cupsd[3552]: Report: jobs-active=0
Sep 22 11:22:41 wart cupsd[3552]: Report: jobs=0
Sep 22 11:22:41 wart cupsd[3552]: Report: clients=2
Sep 22 11:22:41 wart cupsd[3552]: cupsdAddCert: Adding certificate for PID 0
Sep 22 11:22:41 wart cupsd[3552]: [Client 25] Waiting for request.
Sep 22 11:22:41 wart cupsd[3552]: [Client 25] Accepted from localhost (Domain)
Sep 22 11:22:41 wart cupsd[3552]: [Client 25] Server address is
"/run/cups/cups.sock".
Sep 22 11:22:41 wart cupsd[3552]: cupsdSetBusyState: newbusy="Active clients",
busy="Not busy"</pre>
</div>
</p>
<hr>
<span>You are receiving this mail because:</span>
<ul>
<li>You are the assignee for the bug.</li>
</ul>
</body>
</html>