[Libreoffice-commits] .: svl/source
Libreoffice Gerrit user
logerrit at kemper.freedesktop.org
Wed Dec 19 10:40:07 PST 2012
svl/source/numbers/zforfind.cxx | 67 +++++++++++++++++++++++++++++++++++++---
svl/source/numbers/zforfind.hxx | 10 +++++
2 files changed, 72 insertions(+), 5 deletions(-)
New commits:
commit f2851a270eb9c617fce9bfdde5c8f2428ced7014
Author: Eike Rathke <erack at redhat.com>
Date: Wed Dec 19 19:21:55 2012 +0100
resolved fdo#54336 accept abbreviated combined date/time input
Abbreviated combined date/time input was not accepted if the date
acceptance pattern ended in a separator, like "D.M." with input
"D.M. hh:mm".
Additionally check that for "D.M. #" input against a "D.M." pattern the
'#' (any number) is not interpreted as year if the input so far was
recognized to possibly match a date without time, in which case the
count of numbers in input must match the count of numbers in pattern and
input here is not a date.
Change-Id: I3b123b872fbab9dab58afe3b6754b8ad70a61356
diff --git a/svl/source/numbers/zforfind.cxx b/svl/source/numbers/zforfind.cxx
index 6a19dd7..7e05fe4 100644
--- a/svl/source/numbers/zforfind.cxx
+++ b/svl/source/numbers/zforfind.cxx
@@ -140,6 +140,7 @@ void ImpSvNumberInputScan::Reset()
nMayBeMonthDate = 0;
nAcceptedDatePattern = -2;
nDatePatternStart = 0;
+ nDatePatternNumbers = 0;
nCanForceToIso8601 = 0;
}
@@ -1179,6 +1180,7 @@ bool ImpSvNumberInputScan::IsAcceptedDatePattern( sal_uInt16 nStartPatternAt )
for (sal_Int32 nPattern=0; nPattern < sDateAcceptancePatterns.getLength(); ++nPattern)
{
sal_uInt16 nNext = nDatePatternStart;
+ nDatePatternNumbers = 0;
bool bOk = true;
const OUString& rPat = sDateAcceptancePatterns[nPattern];
sal_Int32 nPat = 0;
@@ -1190,6 +1192,8 @@ bool ImpSvNumberInputScan::IsAcceptedDatePattern( sal_uInt16 nStartPatternAt )
case 'M':
case 'D':
bOk = IsNum[nNext];
+ if (bOk)
+ ++nDatePatternNumbers;
break;
default:
bOk = !IsNum[nNext];
@@ -1227,12 +1231,45 @@ bool ImpSvNumberInputScan::IsAcceptedDatePattern( sal_uInt16 nStartPatternAt )
if (nNext < nAnzStrings)
{
// Pattern end but not input end.
- if (!IsNum[nNext])
+ // A trailing blank may be part of the current pattern input,
+ // if pattern is "D.M." and input is "D.M. hh:mm" last was
+ // ". ", or may be following the current pattern input, if
+ // pattern is "D.M" and input is "D.M hh:mm" last was "M".
+ sal_Int32 nPos = 0;
+ sal_uInt16 nCheck;
+ if (nPat > 0 && nNext > 0)
+ {
+ // nPat is one behind after the for loop.
+ sal_Int32 nPatCheck = nPat - 1;
+ switch (rPat[nPatCheck])
+ {
+ case 'Y':
+ case 'M':
+ case 'D':
+ nCheck = nNext;
+ break;
+ default:
+ {
+ nCheck = nNext - 1;
+ // Advance position in input to match length of
+ // non-YMD (separator) characters in pattern.
+ sal_Unicode c;
+ do
+ {
+ ++nPos;
+ } while ((c = rPat[--nPatCheck]) != 'Y' && c != 'M' && c != 'D');
+ }
+ }
+ }
+ else
+ {
+ nCheck = nNext;
+ }
+ if (!IsNum[nCheck])
{
// Trailing (or separating if time follows) blanks are ok.
- sal_Int32 nPos = 0;
- SkipBlanks( sStrArray[nNext], nPos);
- if (nPos == sStrArray[nNext].getLength())
+ SkipBlanks( sStrArray[nCheck], nPos);
+ if (nPos == sStrArray[nCheck].getLength())
{
nAcceptedDatePattern = nPattern;
return true;
@@ -1307,6 +1344,18 @@ bool ImpSvNumberInputScan::SkipDatePatternSeparator( sal_uInt16 nParticle, sal_I
//---------------------------------------------------------------------------
+sal_uInt16 ImpSvNumberInputScan::GetDatePatternNumbers()
+{
+ // If not initialized yet start with first number, if any.
+ if (!IsAcceptedDatePattern( (nAnzNums ? nNums[0] : 0)))
+ {
+ return 0;
+ }
+ return nDatePatternNumbers;
+}
+
+//---------------------------------------------------------------------------
+
sal_uInt32 ImpSvNumberInputScan::GetDatePatternOrder()
{
// If not initialized yet start with first number, if any.
@@ -3392,7 +3441,15 @@ bool ImpSvNumberInputScan::IsNumberFormat( const OUString& rString,
}
else
{
- res = IsAcceptedDatePattern( nNums[0]) || MayBeIso8601() || nMatchedAllStrings;
+ // Even if a date pattern was matched, for abbreviated
+ // pattern like "D.M." an input of "D.M. #" was
+ // accepted because # could had been a time. Here we do
+ // not have a combined date/time input though and #
+ // would be taken as Year in this example, which it is
+ // not. The count of numbers in pattern must match the
+ // count of numbers in input.
+ res = (GetDatePatternNumbers() == nAnzNums)
+ || MayBeIso8601() || nMatchedAllStrings;
}
}
break;
diff --git a/svl/source/numbers/zforfind.hxx b/svl/source/numbers/zforfind.hxx
index ad30dec..412e189 100644
--- a/svl/source/numbers/zforfind.hxx
+++ b/svl/source/numbers/zforfind.hxx
@@ -177,6 +177,12 @@ private:
*/
sal_uInt16 nDatePatternStart;
+ /** Count of numbers that matched the accepted pattern, if any, else 0.
+
+ @see GetDatePatternNumbers()
+ */
+ sal_uInt16 nDatePatternNumbers;
+
#ifdef _ZFORFIND_CXX // methods private to implementation
void Reset(); // Reset all variables before start of analysis
@@ -375,6 +381,10 @@ private:
*/
bool SkipDatePatternSeparator( sal_uInt16 nParticle, sal_Int32 & rPos );
+ /** Returns count of numbers in accepted date pattern.
+ */
+ sal_uInt16 GetDatePatternNumbers();
+
/** Obtain order of accepted date pattern coded as, for example,
('D'<<16)|('M'<<8)|'Y'
*/
More information about the Libreoffice-commits
mailing list