[Libreoffice-commits] .: configure.in solenv/gbuild
Tor Lillqvist
tml at kemper.freedesktop.org
Thu May 10 13:17:01 PDT 2012
configure.in | 46 +++++++++++++++++++++++++++++++++------
solenv/gbuild/platform/macosx.mk | 14 +++++++++++
2 files changed, 54 insertions(+), 6 deletions(-)
New commits:
commit a24a980424ec2ec81b13c8e5a95394d62cbf7406
Author: Tor Lillqvist <tml at iki.fi>
Date: Thu May 10 22:59:30 2012 +0300
Make visibility tests work as intended on Mac OS X
If the tests detect that visibiliy works, then use it also in
gbuild. In the old build system, -fvisibility=hidden was already
being used on Mac OS X if HAVE_GCC_VISIBILITY_FEATURE had been
detected.
In configure.in, let's not hardcode the -shared, -fpic and -Wl,-z,defs
options or the .so suffix used in visibility-related tests. Factor
them out and use platform-specific options. Done just for Mac OS X so
far. Using the Linux options for Mac OS X caused visibility tests to
silently and misleadingly fail.
Yes, it is silly to now define some platform-specific options in three
places: configure.in, solenv/inc/* for the old build system, and
solenv/gbuild/platform/* for gbuild.
At least with my Xcode3 installation, I need to pass an -isysroot flag
pointing to the SDK when running $CC -E, otherwise headers weren't
found. This was then misinterpreted as the visibility tests failing.
Pass -DHAVE_GCC_VISIBILITY_FEATURE to the compiler if configure
detected visibility working. In that case also pass
-fvisibility=hidden. HAVE_GCC_VISIBILITY_FEATURE being defined is
supposed to mean that the -fvisibility=hidden option is used, I think.
Pass also -fvisibility-inlines-hidden if that was detected to work.
Change-Id: I I I58d566fcb07584246e91f45e683ce9b31208edba
diff --git a/configure.in b/configure.in
index b09a935..4322a07 100644
--- a/configure.in
+++ b/configure.in
@@ -140,6 +140,18 @@ test_xrender=yes
test_cups=yes
test_fontconfig=yes
+# Default values, as such probably valid just for Linux, set
+# differently below just for Mac OS X,but at least better than
+# hardcoding these as we used to do. Much of this is duplicated also
+# in solenv for old build system and for gbuild, ideally we should
+# perhaps define stuff like this only here in configure.in?
+
+LINKFLAGSSHL="-shared"
+PICSWITCH="-fpic"
+DLLPOST=".so"
+
+LINKFLAGSNOUNDEFS="-Wl,-z,defs"
+
case "$host_os" in
solaris*)
@@ -244,6 +256,16 @@ darwin*) # Mac OS X or iOS
_os=Darwin
fi
enable_systray=no
+ # See comment above the case "$host_os"
+ LINKFLAGSSHL="-dynamiclib -single_module"
+
+ # -fPIC is default
+ PICSWITCH=""
+
+ DLLPOST=".dylib"
+
+ # -undefined error is the default
+ LINKFLAGSNOUNDEFS=""
;;
freebsd*)
@@ -4661,6 +4683,11 @@ if test \( "$_os" != "WINNT" -o "$WITH_MINGW" = "yes" \); then
AC_LANG_PUSH([C++])
+ save_CPPFLAGS="$CPPFLAGS"
+ if test -n "$MACOSX_SDK_PATH"; then
+ CPPFLAGS="-isysroot $MACOSX_SDK_PATH $CPPFLAGS"
+ fi
+
if test "$HAVE_GCC_VISIBILITY_FEATURE" = "TRUE"; then
AC_MSG_CHECKING([if STL headers are visibility safe])
AC_EGREP_HEADER(visibility push, string, stlvisok=yes, stlvisok=no)
@@ -4674,7 +4701,7 @@ if test \( "$_os" != "WINNT" -o "$WITH_MINGW" = "yes" \); then
if test "$HAVE_GCC_VISIBILITY_FEATURE" = "TRUE"; then
sharedlink_ldflags_save=$LDFLAGS
- LDFLAGS="$LDFLAGS -fvisibility-inlines-hidden -fpic -shared"
+ LDFLAGS="$LDFLAGS -fvisibility-inlines-hidden $PICSWITCH $LINKFLAGSSHL"
AC_MSG_CHECKING([if gcc is -fvisibility-inlines-hidden safe with STL headers])
AC_LINK_IFELSE([AC_LANG_PROGRAM([[
@@ -4682,7 +4709,13 @@ if test \( "$_os" != "WINNT" -o "$WITH_MINGW" = "yes" \); then
using namespace std;
]], [[
istringstream strm( "test" ); return 0;
- ]])],[$EGREP -q unresolvable conftest.err;
+ ]])],
+ # Ugh, surely bad to assume an error message will contain
+ # the word "unresolvable", a problem with
+ # -fvisibility-inlines-hidden and STL headers might cause
+ # some more obscure message on some platform, and anway,
+ # the error message could be localised.
+ [$EGREP -q unresolvable conftest.err;
if test $? -eq 0; then gccvisok=no; else gccvisok=yes; fi],[gccvisok=no
])
AC_MSG_RESULT([$gccvisok])
@@ -4708,16 +4741,15 @@ struct S2: S1<int> { virtual ~S2(); };
struct S3: S2 { virtual ~S3(); }; S3::~S3() {}
_ACEOF
gccvisinlineshiddenok=yes
- if ! $CXX $CXXFLAGS $CPPFLAGS -shared -fPIC -fvisibility-inlines-hidden conftestlib1.cc -o libconftest1.so >/dev/null 2>/dev/null; then
+ if ! $CXX $CXXFLAGS $CPPFLAGS $LINKFLAGSSHL -fPIC -fvisibility-inlines-hidden conftestlib1.cc -o libconftest1$DLLPOST; then
gccvisinlineshiddenok=no
else
- if ! $CXX $CXXFLAGS $CPPFLAGS -shared -fPIC -fvisibility-inlines-hidden conftestlib2.cc -L. -lconftest1 -Wl,-z,defs -o libconftest2.so >/dev/null 2>/dev/null; then
+ if ! $CXX $CXXFLAGS $CPPFLAGS $LINKFLAGSSHL -fPIC -fvisibility-inlines-hidden conftestlib2.cc -L. -lconftest1 $LINKFLAGSNOUNDEFS -o libconftest2$DLLPOST; then
gccvisinlineshiddenok=no
fi
fi
- rm -f libconftest1.so libconftest2.so
-
+ rm -f libconftest1$DLLPOST libconftest2$DLLPOST
AC_MSG_RESULT([$gccvisinlineshiddenok])
if test "$gccvisinlineshiddenok" = "no"; then
AC_MSG_WARN([Your gcc/clang is not -fvisibility-inlines-hidden safe, disabling that.])
@@ -4767,6 +4799,8 @@ _ACEOF
fi
fi
+ CPPFLAGS="$save_CPPFLAGS"
+
AC_LANG_POP([C++])
fi
diff --git a/solenv/gbuild/platform/macosx.mk b/solenv/gbuild/platform/macosx.mk
index 9241cda..5ad4f3d 100644
--- a/solenv/gbuild/platform/macosx.mk
+++ b/solenv/gbuild/platform/macosx.mk
@@ -47,9 +47,23 @@ gb_OSDEFS := \
$(EXTRA_CDEFS) \
+ifeq ($(HAVE_GCC_VISIBILITY_FEATURE),TRUE)
gb_COMPILERDEFS += \
-DHAVE_GCC_VISIBILITY_FEATURE \
+gb_CFLAGS += \
+ -fvisibility=hidden
+
+gb_CXXFLAGS += \
+ -fvisibility=hidden \
+
+ifneq ($(HAVE_GCC_VISIBILITY_BROKEN),TRUE)
+gb_CXXFLAGS += \
+ -fvisibility-inlines-hidden \
+
+endif
+
+endif
ifeq ($(HAVE_SFINAE_ANONYMOUS_BROKEN),TRUE)
gb_COMPILERDEFS += \
More information about the Libreoffice-commits
mailing list