[Libreoffice-commits] core.git: Branch 'libreoffice-4-3' - sw/source
Oliver-Rainer Wittmann
orw at apache.org
Wed Jul 16 05:02:00 PDT 2014
sw/source/core/crsr/viscrs.cxx | 2
sw/source/core/inc/rootfrm.hxx | 4
sw/source/core/layout/trvlfrm.cxx | 871 ++++++++++++++++++--------------------
3 files changed, 429 insertions(+), 448 deletions(-)
New commits:
commit 3a2f00a90b5cc08c45cf92c82050247deb5176d6
Author: Oliver-Rainer Wittmann <orw at apache.org>
Date: Thu Jun 5 10:06:45 2014 +0000
Resolves: #i125024# remove code regarding table selection...
as it is not used any more.
(cherry picked from commit 65f39887f41e701b699fd2e51da803d116766eb8)
Signed-off-by: Michael Stahl <mstahl at redhat.com>
Conflicts:
sw/source/core/crsr/viscrs.cxx
sw/source/core/inc/rootfrm.hxx
sw/source/core/layout/trvlfrm.cxx
Change-Id: Ia37e73a515a8f5d0218e4e4144e75f18449599c9
(cherry picked from commit 690c6787b4a2ab0118690fb8d00be871faa0db76)
Signed-off-by: Michael Stahl <mstahl at redhat.com>
diff --git a/sw/source/core/crsr/viscrs.cxx b/sw/source/core/crsr/viscrs.cxx
index 6a05a8c..b6dc410 100644
--- a/sw/source/core/crsr/viscrs.cxx
+++ b/sw/source/core/crsr/viscrs.cxx
@@ -534,7 +534,7 @@ void SwShellCrsr::FillRects()
(GetMark()->nNode == GetPoint()->nNode ||
(GetMark()->nNode.GetNode().IsCntntNode() &&
GetMark()->nNode.GetNode().GetCntntNode()->getLayoutFrm( GetShell()->GetLayout() ) ) ))
- GetShell()->GetLayout()->CalcFrmRects( *this, GetShell()->IsTableMode() );
+ GetShell()->GetLayout()->CalcFrmRects( *this );
}
void SwShellCrsr::Show()
diff --git a/sw/source/core/inc/rootfrm.hxx b/sw/source/core/inc/rootfrm.hxx
index f1c6ea2..78a95e5 100644
--- a/sw/source/core/inc/rootfrm.hxx
+++ b/sw/source/core/inc/rootfrm.hxx
@@ -275,9 +275,7 @@ public:
// next page border
const SwPageFrm* GetPageAtPos( const Point& rPt, const Size* pSize = 0, bool bExtend = false ) const;
- void CalcFrmRects(
- SwShellCrsr&,
- const bool bIsTblSel );
+ void CalcFrmRects( SwShellCrsr& );
// Calculates the cells included from the current selection
// false: There was no result because of an invalid layout
diff --git a/sw/source/core/layout/trvlfrm.cxx b/sw/source/core/layout/trvlfrm.cxx
index 6fc290f..ceb6fff 100644
--- a/sw/source/core/layout/trvlfrm.cxx
+++ b/sw/source/core/layout/trvlfrm.cxx
@@ -1987,9 +1987,7 @@ inline void Sub( SwRegionRects& rRegion, const SwRect& rRect )
* inverted rectangles are available.
* In the end the Flys are cut out of the section.
*/
-void SwRootFrm::CalcFrmRects(
- SwShellCrsr &rCrsr,
- const bool bIsTblMode)
+void SwRootFrm::CalcFrmRects(SwShellCrsr &rCrsr)
{
SwPosition *pStartPos = rCrsr.Start(),
*pEndPos = rCrsr.GetPoint() == pStartPos ? rCrsr.GetMark() : rCrsr.GetPoint();
@@ -2034,45 +2032,49 @@ void SwRootFrm::CalcFrmRects(
}
}
- //Case 4: Table selection
- if( bIsTblMode )
- {
- const SwFrm *pCell = pStartFrm->GetUpper();
- while ( !pCell->IsCellFrm() )
- pCell = pCell->GetUpper();
- SwRect aTmp( pCell->Prt() );
- aTmp.Pos() += pCell->Frm().Pos();
- aRegion.ChangeOrigin( aTmp );
- aRegion.clear();
- aRegion.push_back( aTmp);
- }
- else
- {
- // if a selection which is not allowed exists, we correct what is not
- // allowed (header/footer/table-headline) for two pages.
- do { // middle check loop
- const SwLayoutFrm* pSttLFrm = pStartFrm->GetUpper();
- const sal_uInt16 cHdFtTblHd = FRM_HEADER | FRM_FOOTER | FRM_TAB;
- while( pSttLFrm &&
- ! (cHdFtTblHd & pSttLFrm->GetType() ))
- pSttLFrm = pSttLFrm->GetUpper();
- if( !pSttLFrm )
- break;
- const SwLayoutFrm* pEndLFrm = pEndFrm->GetUpper();
- while( pEndLFrm &&
- ! (cHdFtTblHd & pEndLFrm->GetType() ))
- pEndLFrm = pEndLFrm->GetUpper();
- if( !pEndLFrm )
- break;
+ // if a selection which is not allowed exists, we correct what is not
+ // allowed (header/footer/table-headline) for two pages.
+ do { // middle check loop
+ const SwLayoutFrm* pSttLFrm = pStartFrm->GetUpper();
+ const sal_uInt16 cHdFtTblHd = FRM_HEADER | FRM_FOOTER | FRM_TAB;
+ while( pSttLFrm &&
+ ! (cHdFtTblHd & pSttLFrm->GetType() ))
+ pSttLFrm = pSttLFrm->GetUpper();
+ if( !pSttLFrm )
+ break;
+ const SwLayoutFrm* pEndLFrm = pEndFrm->GetUpper();
+ while( pEndLFrm &&
+ ! (cHdFtTblHd & pEndLFrm->GetType() ))
+ pEndLFrm = pEndLFrm->GetUpper();
+ if( !pEndLFrm )
+ break;
- OSL_ENSURE( pEndLFrm->GetType() == pSttLFrm->GetType(),
- "Selection over different content" );
- switch( pSttLFrm->GetType() )
+ OSL_ENSURE( pEndLFrm->GetType() == pSttLFrm->GetType(),
+ "Selection over different content" );
+ switch( pSttLFrm->GetType() )
+ {
+ case FRM_HEADER:
+ case FRM_FOOTER:
+ // On different pages? Then always on the start-page
+ if( pEndLFrm->FindPageFrm() != pSttLFrm->FindPageFrm() )
+ {
+ // Set end- to the start-CntntFrame
+ if( pStartPos == rCrsr.GetPoint() )
+ pEndFrm = pStartFrm;
+ else
+ pStartFrm = pEndFrm;
+ }
+ break;
+ case FRM_TAB:
+ // On different pages? Then check for table-headline
{
- case FRM_HEADER:
- case FRM_FOOTER:
- // On different pages? Then always on the start-page
- if( pEndLFrm->FindPageFrm() != pSttLFrm->FindPageFrm() )
+ const SwTabFrm* pTabFrm = (SwTabFrm*)pSttLFrm;
+ if( ( pTabFrm->GetFollow() ||
+ ((SwTabFrm*)pEndLFrm)->GetFollow() ) &&
+ pTabFrm->GetTable()->GetRowsToRepeat() > 0 &&
+ pTabFrm->GetLower() != ((SwTabFrm*)pEndLFrm)->GetLower() &&
+ ( lcl_IsInRepeatedHeadline( pStartFrm ) ||
+ lcl_IsInRepeatedHeadline( pEndFrm ) ) )
{
// Set end- to the start-CntntFrame
if( pStartPos == rCrsr.GetPoint() )
@@ -2080,478 +2082,459 @@ void SwRootFrm::CalcFrmRects(
else
pStartFrm = pEndFrm;
}
- break;
- case FRM_TAB:
- // On different pages? Then check for table-headline
- {
- const SwTabFrm* pTabFrm = (SwTabFrm*)pSttLFrm;
- if( ( pTabFrm->GetFollow() ||
- ((SwTabFrm*)pEndLFrm)->GetFollow() ) &&
- pTabFrm->GetTable()->GetRowsToRepeat() > 0 &&
- pTabFrm->GetLower() != ((SwTabFrm*)pEndLFrm)->GetLower() &&
- ( lcl_IsInRepeatedHeadline( pStartFrm ) ||
- lcl_IsInRepeatedHeadline( pEndFrm ) ) )
- {
- // Set end- to the start-CntntFrame
- if( pStartPos == rCrsr.GetPoint() )
- pEndFrm = pStartFrm;
- else
- pStartFrm = pEndFrm;
- }
- }
- break;
}
- } while( false );
-
- SwCrsrMoveState aTmpState( MV_NONE );
- aTmpState.b2Lines = true;
- aTmpState.bNoScroll = true;
- aTmpState.nCursorBidiLevel = pStartFrm->IsRightToLeft() ? 1 : 0;
-
- //CntntRects to Start- and EndFrms.
- SwRect aStRect, aEndRect;
- pStartFrm->GetCharRect( aStRect, *pStartPos, &aTmpState );
- Sw2LinesPos *pSt2Pos = aTmpState.p2Lines;
- aTmpState.p2Lines = NULL;
- aTmpState.nCursorBidiLevel = pEndFrm->IsRightToLeft() ? 1 : 0;
-
- pEndFrm->GetCharRect( aEndRect, *pEndPos, &aTmpState );
- Sw2LinesPos *pEnd2Pos = aTmpState.p2Lines;
-
- SwRect aStFrm ( pStartFrm->UnionFrm( true ) );
- aStFrm.Intersection( pStartFrm->PaintArea() );
- SwRect aEndFrm( pStartFrm == pEndFrm ? aStFrm : pEndFrm->UnionFrm( true ) );
- if( pStartFrm != pEndFrm )
- {
- aEndFrm.Intersection( pEndFrm->PaintArea() );
- }
- SWRECTFN( pStartFrm )
- const bool bR2L = pStartFrm->IsRightToLeft();
- const bool bEndR2L = pEndFrm->IsRightToLeft();
-
- // If there's no doubleline portion involved or start and end are both
- // in the same doubleline portion, all works fine, but otherwise
- // we need the following...
- if( pSt2Pos != pEnd2Pos && ( !pSt2Pos || !pEnd2Pos ||
- pSt2Pos->aPortion != pEnd2Pos->aPortion ) )
- {
- // If we have a start(end) position inside a doubleline portion
- // the surrounded part of the doubleline portion is subtracted
- // from the region and the aStRect(aEndRect) is set to the
- // end(start) of the doubleline portion.
- if( pSt2Pos )
- {
- SwRect aTmp( aStRect );
+ break;
+ }
+ } while( false );
+
+ SwCrsrMoveState aTmpState( MV_NONE );
+ aTmpState.b2Lines = true;
+ aTmpState.bNoScroll = true;
+ aTmpState.nCursorBidiLevel = pStartFrm->IsRightToLeft() ? 1 : 0;
+
+ //CntntRects to Start- and EndFrms.
+ SwRect aStRect, aEndRect;
+ pStartFrm->GetCharRect( aStRect, *pStartPos, &aTmpState );
+ Sw2LinesPos *pSt2Pos = aTmpState.p2Lines;
+ aTmpState.p2Lines = NULL;
+ aTmpState.nCursorBidiLevel = pEndFrm->IsRightToLeft() ? 1 : 0;
+
+ pEndFrm->GetCharRect( aEndRect, *pEndPos, &aTmpState );
+ Sw2LinesPos *pEnd2Pos = aTmpState.p2Lines;
+
+ SwRect aStFrm ( pStartFrm->UnionFrm( true ) );
+ aStFrm.Intersection( pStartFrm->PaintArea() );
+ SwRect aEndFrm( pStartFrm == pEndFrm ? aStFrm : pEndFrm->UnionFrm( true ) );
+ if( pStartFrm != pEndFrm )
+ {
+ aEndFrm.Intersection( pEndFrm->PaintArea() );
+ }
+ SWRECTFN( pStartFrm )
+ const bool bR2L = pStartFrm->IsRightToLeft();
+ const bool bEndR2L = pEndFrm->IsRightToLeft();
+
+ // If there's no doubleline portion involved or start and end are both
+ // in the same doubleline portion, all works fine, but otherwise
+ // we need the following...
+ if( pSt2Pos != pEnd2Pos && ( !pSt2Pos || !pEnd2Pos ||
+ pSt2Pos->aPortion != pEnd2Pos->aPortion ) )
+ {
+ // If we have a start(end) position inside a doubleline portion
+ // the surrounded part of the doubleline portion is subtracted
+ // from the region and the aStRect(aEndRect) is set to the
+ // end(start) of the doubleline portion.
+ if( pSt2Pos )
+ {
+ SwRect aTmp( aStRect );
- // BiDi-Portions are swimming against the current.
- const bool bPorR2L = ( MT_BIDI == pSt2Pos->nMultiType ) ?
- ! bR2L :
- bR2L;
+ // BiDi-Portions are swimming against the current.
+ const bool bPorR2L = ( MT_BIDI == pSt2Pos->nMultiType ) ?
+ ! bR2L :
+ bR2L;
- if( MT_BIDI == pSt2Pos->nMultiType &&
- (pSt2Pos->aPortion2.*fnRect->fnGetWidth)() )
- {
- // nested bidi portion
- long nRightAbs = (pSt2Pos->aPortion.*fnRect->fnGetRight)();
- nRightAbs -= (pSt2Pos->aPortion2.*fnRect->fnGetLeft)();
- long nLeftAbs = nRightAbs - (pSt2Pos->aPortion2.*fnRect->fnGetWidth)();
+ if( MT_BIDI == pSt2Pos->nMultiType &&
+ (pSt2Pos->aPortion2.*fnRect->fnGetWidth)() )
+ {
+ // nested bidi portion
+ long nRightAbs = (pSt2Pos->aPortion.*fnRect->fnGetRight)();
+ nRightAbs -= (pSt2Pos->aPortion2.*fnRect->fnGetLeft)();
+ long nLeftAbs = nRightAbs - (pSt2Pos->aPortion2.*fnRect->fnGetWidth)();
- (aTmp.*fnRect->fnSetRight)( nRightAbs );
+ (aTmp.*fnRect->fnSetRight)( nRightAbs );
- if ( ! pEnd2Pos || pEnd2Pos->aPortion != pSt2Pos->aPortion )
- {
- SwRect aTmp2( pSt2Pos->aPortion );
- (aTmp2.*fnRect->fnSetRight)( nLeftAbs );
- aTmp2.Intersection( aEndFrm );
- Sub( aRegion, aTmp2 );
- }
+ if ( ! pEnd2Pos || pEnd2Pos->aPortion != pSt2Pos->aPortion )
+ {
+ SwRect aTmp2( pSt2Pos->aPortion );
+ (aTmp2.*fnRect->fnSetRight)( nLeftAbs );
+ aTmp2.Intersection( aEndFrm );
+ Sub( aRegion, aTmp2 );
}
+ }
+ else
+ {
+ if( bPorR2L )
+ (aTmp.*fnRect->fnSetLeft)(
+ (pSt2Pos->aPortion.*fnRect->fnGetLeft)() );
else
+ (aTmp.*fnRect->fnSetRight)(
+ (pSt2Pos->aPortion.*fnRect->fnGetRight)() );
+ }
+
+ if( MT_ROT_90 == pSt2Pos->nMultiType ||
+ (pSt2Pos->aPortion.*fnRect->fnGetTop)() ==
+ (aTmp.*fnRect->fnGetTop)() )
+ {
+ (aTmp.*fnRect->fnSetTop)(
+ (pSt2Pos->aLine.*fnRect->fnGetTop)() );
+ }
+
+ aTmp.Intersection( aStFrm );
+ Sub( aRegion, aTmp );
+
+ SwTwips nTmp = (pSt2Pos->aLine.*fnRect->fnGetBottom)();
+ if( MT_ROT_90 != pSt2Pos->nMultiType &&
+ (aStRect.*fnRect->fnBottomDist)( nTmp ) > 0 )
+ {
+ (aTmp.*fnRect->fnSetTop)( (aTmp.*fnRect->fnGetBottom)() );
+ (aTmp.*fnRect->fnSetBottom)( nTmp );
+ if( (aStRect.*fnRect->fnBottomDist)(
+ (pSt2Pos->aPortion.*fnRect->fnGetBottom)() ) > 0 )
{
if( bPorR2L )
- (aTmp.*fnRect->fnSetLeft)(
- (pSt2Pos->aPortion.*fnRect->fnGetLeft)() );
- else
(aTmp.*fnRect->fnSetRight)(
(pSt2Pos->aPortion.*fnRect->fnGetRight)() );
+ else
+ (aTmp.*fnRect->fnSetLeft)(
+ (pSt2Pos->aPortion.*fnRect->fnGetLeft)() );
}
-
- if( MT_ROT_90 == pSt2Pos->nMultiType ||
- (pSt2Pos->aPortion.*fnRect->fnGetTop)() ==
- (aTmp.*fnRect->fnGetTop)() )
- {
- (aTmp.*fnRect->fnSetTop)(
- (pSt2Pos->aLine.*fnRect->fnGetTop)() );
- }
-
aTmp.Intersection( aStFrm );
Sub( aRegion, aTmp );
+ }
- SwTwips nTmp = (pSt2Pos->aLine.*fnRect->fnGetBottom)();
- if( MT_ROT_90 != pSt2Pos->nMultiType &&
- (aStRect.*fnRect->fnBottomDist)( nTmp ) > 0 )
- {
- (aTmp.*fnRect->fnSetTop)( (aTmp.*fnRect->fnGetBottom)() );
- (aTmp.*fnRect->fnSetBottom)( nTmp );
- if( (aStRect.*fnRect->fnBottomDist)(
- (pSt2Pos->aPortion.*fnRect->fnGetBottom)() ) > 0 )
- {
- if( bPorR2L )
- (aTmp.*fnRect->fnSetRight)(
- (pSt2Pos->aPortion.*fnRect->fnGetRight)() );
- else
- (aTmp.*fnRect->fnSetLeft)(
- (pSt2Pos->aPortion.*fnRect->fnGetLeft)() );
- }
- aTmp.Intersection( aStFrm );
- Sub( aRegion, aTmp );
- }
+ aStRect = pSt2Pos->aLine;
+ (aStRect.*fnRect->fnSetLeft)( bR2L ?
+ (pSt2Pos->aPortion.*fnRect->fnGetLeft)() :
+ (pSt2Pos->aPortion.*fnRect->fnGetRight)() );
+ (aStRect.*fnRect->fnSetWidth)( 1 );
+ }
- aStRect = pSt2Pos->aLine;
- (aStRect.*fnRect->fnSetLeft)( bR2L ?
- (pSt2Pos->aPortion.*fnRect->fnGetLeft)() :
- (pSt2Pos->aPortion.*fnRect->fnGetRight)() );
- (aStRect.*fnRect->fnSetWidth)( 1 );
- }
+ if( pEnd2Pos )
+ {
+ SWRECTFNX( pEndFrm )
+ SwRect aTmp( aEndRect );
+
+ // BiDi-Portions are swimming against the current.
+ const bool bPorR2L = ( MT_BIDI == pEnd2Pos->nMultiType ) ?
+ ! bEndR2L :
+ bEndR2L;
- if( pEnd2Pos )
+ if( MT_BIDI == pEnd2Pos->nMultiType &&
+ (pEnd2Pos->aPortion2.*fnRectX->fnGetWidth)() )
{
- SWRECTFNX( pEndFrm )
- SwRect aTmp( aEndRect );
+ // nested bidi portion
+ long nRightAbs = (pEnd2Pos->aPortion.*fnRectX->fnGetRight)();
+ nRightAbs = nRightAbs - (pEnd2Pos->aPortion2.*fnRectX->fnGetLeft)();
+ long nLeftAbs = nRightAbs - (pEnd2Pos->aPortion2.*fnRectX->fnGetWidth)();
- // BiDi-Portions are swimming against the current.
- const bool bPorR2L = ( MT_BIDI == pEnd2Pos->nMultiType ) ?
- ! bEndR2L :
- bEndR2L;
+ (aTmp.*fnRectX->fnSetLeft)( nLeftAbs );
- if( MT_BIDI == pEnd2Pos->nMultiType &&
- (pEnd2Pos->aPortion2.*fnRectX->fnGetWidth)() )
+ if ( ! pSt2Pos || pSt2Pos->aPortion != pEnd2Pos->aPortion )
{
- // nested bidi portion
- long nRightAbs = (pEnd2Pos->aPortion.*fnRectX->fnGetRight)();
- nRightAbs = nRightAbs - (pEnd2Pos->aPortion2.*fnRectX->fnGetLeft)();
- long nLeftAbs = nRightAbs - (pEnd2Pos->aPortion2.*fnRectX->fnGetWidth)();
-
- (aTmp.*fnRectX->fnSetLeft)( nLeftAbs );
-
- if ( ! pSt2Pos || pSt2Pos->aPortion != pEnd2Pos->aPortion )
- {
- SwRect aTmp2( pEnd2Pos->aPortion );
- (aTmp2.*fnRectX->fnSetLeft)( nRightAbs );
- aTmp2.Intersection( aEndFrm );
- Sub( aRegion, aTmp2 );
- }
+ SwRect aTmp2( pEnd2Pos->aPortion );
+ (aTmp2.*fnRectX->fnSetLeft)( nRightAbs );
+ aTmp2.Intersection( aEndFrm );
+ Sub( aRegion, aTmp2 );
}
+ }
+ else
+ {
+ if ( bPorR2L )
+ (aTmp.*fnRectX->fnSetRight)(
+ (pEnd2Pos->aPortion.*fnRectX->fnGetRight)() );
else
- {
- if ( bPorR2L )
- (aTmp.*fnRectX->fnSetRight)(
- (pEnd2Pos->aPortion.*fnRectX->fnGetRight)() );
- else
- (aTmp.*fnRectX->fnSetLeft)(
- (pEnd2Pos->aPortion.*fnRectX->fnGetLeft)() );
- }
+ (aTmp.*fnRectX->fnSetLeft)(
+ (pEnd2Pos->aPortion.*fnRectX->fnGetLeft)() );
+ }
- if( MT_ROT_90 == pEnd2Pos->nMultiType ||
- (pEnd2Pos->aPortion.*fnRectX->fnGetBottom)() ==
- (aEndRect.*fnRectX->fnGetBottom)() )
- {
- (aTmp.*fnRectX->fnSetBottom)(
- (pEnd2Pos->aLine.*fnRectX->fnGetBottom)() );
- }
+ if( MT_ROT_90 == pEnd2Pos->nMultiType ||
+ (pEnd2Pos->aPortion.*fnRectX->fnGetBottom)() ==
+ (aEndRect.*fnRectX->fnGetBottom)() )
+ {
+ (aTmp.*fnRectX->fnSetBottom)(
+ (pEnd2Pos->aLine.*fnRectX->fnGetBottom)() );
+ }
- aTmp.Intersection( aEndFrm );
- Sub( aRegion, aTmp );
+ aTmp.Intersection( aEndFrm );
+ Sub( aRegion, aTmp );
- // The next statement means neither ruby nor rotate(90):
- if( !( MT_RUBY & pEnd2Pos->nMultiType ) )
+ // The next statement means neither ruby nor rotate(90):
+ if( !( MT_RUBY & pEnd2Pos->nMultiType ) )
+ {
+ SwTwips nTmp = (pEnd2Pos->aLine.*fnRectX->fnGetTop)();
+ if( (aEndRect.*fnRectX->fnGetTop)() != nTmp )
{
- SwTwips nTmp = (pEnd2Pos->aLine.*fnRectX->fnGetTop)();
- if( (aEndRect.*fnRectX->fnGetTop)() != nTmp )
+ (aTmp.*fnRectX->fnSetBottom)(
+ (aTmp.*fnRectX->fnGetTop)() );
+ (aTmp.*fnRectX->fnSetTop)( nTmp );
+ if( (aEndRect.*fnRectX->fnGetTop)() !=
+ (pEnd2Pos->aPortion.*fnRectX->fnGetTop)() )
{
- (aTmp.*fnRectX->fnSetBottom)(
- (aTmp.*fnRectX->fnGetTop)() );
- (aTmp.*fnRectX->fnSetTop)( nTmp );
- if( (aEndRect.*fnRectX->fnGetTop)() !=
- (pEnd2Pos->aPortion.*fnRectX->fnGetTop)() )
- {
- if( bPorR2L )
- (aTmp.*fnRectX->fnSetLeft)(
- (pEnd2Pos->aPortion.*fnRectX->fnGetLeft)() );
- else
- (aTmp.*fnRectX->fnSetRight)(
- (pEnd2Pos->aPortion.*fnRectX->fnGetRight)() );
- }
- aTmp.Intersection( aEndFrm );
- Sub( aRegion, aTmp );
+ if( bPorR2L )
+ (aTmp.*fnRectX->fnSetLeft)(
+ (pEnd2Pos->aPortion.*fnRectX->fnGetLeft)() );
+ else
+ (aTmp.*fnRectX->fnSetRight)(
+ (pEnd2Pos->aPortion.*fnRectX->fnGetRight)() );
}
+ aTmp.Intersection( aEndFrm );
+ Sub( aRegion, aTmp );
}
-
- aEndRect = pEnd2Pos->aLine;
- (aEndRect.*fnRectX->fnSetLeft)( bEndR2L ?
- (pEnd2Pos->aPortion.*fnRectX->fnGetRight)() :
- (pEnd2Pos->aPortion.*fnRectX->fnGetLeft)() );
- (aEndRect.*fnRectX->fnSetWidth)( 1 );
}
- }
- else if( pSt2Pos && pEnd2Pos &&
- MT_BIDI == pSt2Pos->nMultiType &&
- MT_BIDI == pEnd2Pos->nMultiType &&
- pSt2Pos->aPortion == pEnd2Pos->aPortion &&
- pSt2Pos->aPortion2 != pEnd2Pos->aPortion2 )
- {
- // This is the ugly special case, where the selection starts and
- // ends in the same bidi portion but one start or end is inside a
- // nested bidi portion.
- if ( (pSt2Pos->aPortion2.*fnRect->fnGetWidth)() )
- {
- SwRect aTmp( aStRect );
- long nRightAbs = (pSt2Pos->aPortion.*fnRect->fnGetRight)();
- nRightAbs -= (pSt2Pos->aPortion2.*fnRect->fnGetLeft)();
- long nLeftAbs = nRightAbs - (pSt2Pos->aPortion2.*fnRect->fnGetWidth)();
-
- (aTmp.*fnRect->fnSetRight)( nRightAbs );
- aTmp.Intersection( aStFrm );
- Sub( aRegion, aTmp );
-
- aStRect = pSt2Pos->aLine;
- (aStRect.*fnRect->fnSetLeft)( bR2L ? nRightAbs : nLeftAbs );
- (aStRect.*fnRect->fnSetWidth)( 1 );
- }
-
- SWRECTFNX( pEndFrm )
- if ( (pEnd2Pos->aPortion2.*fnRectX->fnGetWidth)() )
- {
- SwRect aTmp( aEndRect );
- long nRightAbs = (pEnd2Pos->aPortion.*fnRectX->fnGetRight)();
- nRightAbs -= (pEnd2Pos->aPortion2.*fnRectX->fnGetLeft)();
- long nLeftAbs = nRightAbs - (pEnd2Pos->aPortion2.*fnRectX->fnGetWidth)();
+ aEndRect = pEnd2Pos->aLine;
+ (aEndRect.*fnRectX->fnSetLeft)( bEndR2L ?
+ (pEnd2Pos->aPortion.*fnRectX->fnGetRight)() :
+ (pEnd2Pos->aPortion.*fnRectX->fnGetLeft)() );
+ (aEndRect.*fnRectX->fnSetWidth)( 1 );
+ }
+ }
+ else if( pSt2Pos && pEnd2Pos &&
+ MT_BIDI == pSt2Pos->nMultiType &&
+ MT_BIDI == pEnd2Pos->nMultiType &&
+ pSt2Pos->aPortion == pEnd2Pos->aPortion &&
+ pSt2Pos->aPortion2 != pEnd2Pos->aPortion2 )
+ {
+ // This is the ugly special case, where the selection starts and
+ // ends in the same bidi portion but one start or end is inside a
+ // nested bidi portion.
- (aTmp.*fnRectX->fnSetLeft)( nLeftAbs );
- aTmp.Intersection( aEndFrm );
- Sub( aRegion, aTmp );
+ if ( (pSt2Pos->aPortion2.*fnRect->fnGetWidth)() )
+ {
+ SwRect aTmp( aStRect );
+ long nRightAbs = (pSt2Pos->aPortion.*fnRect->fnGetRight)();
+ nRightAbs -= (pSt2Pos->aPortion2.*fnRect->fnGetLeft)();
+ long nLeftAbs = nRightAbs - (pSt2Pos->aPortion2.*fnRect->fnGetWidth)();
+
+ (aTmp.*fnRect->fnSetRight)( nRightAbs );
+ aTmp.Intersection( aStFrm );
+ Sub( aRegion, aTmp );
+
+ aStRect = pSt2Pos->aLine;
+ (aStRect.*fnRect->fnSetLeft)( bR2L ? nRightAbs : nLeftAbs );
+ (aStRect.*fnRect->fnSetWidth)( 1 );
+ }
- aEndRect = pEnd2Pos->aLine;
- (aEndRect.*fnRectX->fnSetLeft)( bEndR2L ? nLeftAbs : nRightAbs );
- (aEndRect.*fnRectX->fnSetWidth)( 1 );
- }
+ SWRECTFNX( pEndFrm )
+ if ( (pEnd2Pos->aPortion2.*fnRectX->fnGetWidth)() )
+ {
+ SwRect aTmp( aEndRect );
+ long nRightAbs = (pEnd2Pos->aPortion.*fnRectX->fnGetRight)();
+ nRightAbs -= (pEnd2Pos->aPortion2.*fnRectX->fnGetLeft)();
+ long nLeftAbs = nRightAbs - (pEnd2Pos->aPortion2.*fnRectX->fnGetWidth)();
+
+ (aTmp.*fnRectX->fnSetLeft)( nLeftAbs );
+ aTmp.Intersection( aEndFrm );
+ Sub( aRegion, aTmp );
+
+ aEndRect = pEnd2Pos->aLine;
+ (aEndRect.*fnRectX->fnSetLeft)( bEndR2L ? nLeftAbs : nRightAbs );
+ (aEndRect.*fnRectX->fnSetWidth)( 1 );
}
+ }
- // The charrect may be outside the paintarea (for cursortravelling)
- // but the selection has to be restricted to the paintarea
- if( aStRect.Left() < aStFrm.Left() )
- aStRect.Left( aStFrm.Left() );
- else if( aStRect.Left() > aStFrm.Right() )
- aStRect.Left( aStFrm.Right() );
- SwTwips nTmp = aStRect.Right();
- if( nTmp < aStFrm.Left() )
- aStRect.Right( aStFrm.Left() );
- else if( nTmp > aStFrm.Right() )
- aStRect.Right( aStFrm.Right() );
- if( aEndRect.Left() < aEndFrm.Left() )
- aEndRect.Left( aEndFrm.Left() );
- else if( aEndRect.Left() > aEndFrm.Right() )
- aEndRect.Left( aEndFrm.Right() );
- nTmp = aEndRect.Right();
- if( nTmp < aEndFrm.Left() )
- aEndRect.Right( aEndFrm.Left() );
- else if( nTmp > aEndFrm.Right() )
- aEndRect.Right( aEndFrm.Right() );
-
- if( pStartFrm == pEndFrm )
- {
- bool bSameRotatedOrBidi = pSt2Pos && pEnd2Pos &&
- ( MT_BIDI & pSt2Pos->nMultiType ) &&
- pSt2Pos->aPortion == pEnd2Pos->aPortion;
- //case 1: (Same frame and same row)
- if( bSameRotatedOrBidi ||
- (aStRect.*fnRect->fnGetTop)() == (aEndRect.*fnRect->fnGetTop)() )
+ // The charrect may be outside the paintarea (for cursortravelling)
+ // but the selection has to be restricted to the paintarea
+ if( aStRect.Left() < aStFrm.Left() )
+ aStRect.Left( aStFrm.Left() );
+ else if( aStRect.Left() > aStFrm.Right() )
+ aStRect.Left( aStFrm.Right() );
+ SwTwips nTmp = aStRect.Right();
+ if( nTmp < aStFrm.Left() )
+ aStRect.Right( aStFrm.Left() );
+ else if( nTmp > aStFrm.Right() )
+ aStRect.Right( aStFrm.Right() );
+ if( aEndRect.Left() < aEndFrm.Left() )
+ aEndRect.Left( aEndFrm.Left() );
+ else if( aEndRect.Left() > aEndFrm.Right() )
+ aEndRect.Left( aEndFrm.Right() );
+ nTmp = aEndRect.Right();
+ if( nTmp < aEndFrm.Left() )
+ aEndRect.Right( aEndFrm.Left() );
+ else if( nTmp > aEndFrm.Right() )
+ aEndRect.Right( aEndFrm.Right() );
+
+ if( pStartFrm == pEndFrm )
+ {
+ bool bSameRotatedOrBidi = pSt2Pos && pEnd2Pos &&
+ ( MT_BIDI & pSt2Pos->nMultiType ) &&
+ pSt2Pos->aPortion == pEnd2Pos->aPortion;
+ //case 1: (Same frame and same row)
+ if( bSameRotatedOrBidi ||
+ (aStRect.*fnRect->fnGetTop)() == (aEndRect.*fnRect->fnGetTop)() )
+ {
+ Point aTmpSt( aStRect.Pos() );
+ Point aTmpEnd( aEndRect.Right(), aEndRect.Bottom() );
+ if( bSameRotatedOrBidi || bR2L )
{
- Point aTmpSt( aStRect.Pos() );
- Point aTmpEnd( aEndRect.Right(), aEndRect.Bottom() );
- if( bSameRotatedOrBidi || bR2L )
+ if( aTmpSt.Y() > aTmpEnd.Y() )
{
- if( aTmpSt.Y() > aTmpEnd.Y() )
- {
- long nTmpY = aTmpEnd.Y();
- aTmpEnd.Y() = aTmpSt.Y();
- aTmpSt.Y() = nTmpY;
- }
- if( aTmpSt.X() > aTmpEnd.X() )
- {
- long nTmpX = aTmpEnd.X();
- aTmpEnd.X() = aTmpSt.X();
- aTmpSt.X() = nTmpX;
- }
+ long nTmpY = aTmpEnd.Y();
+ aTmpEnd.Y() = aTmpSt.Y();
+ aTmpSt.Y() = nTmpY;
}
-
- SwRect aTmp = SwRect( aTmpSt, aTmpEnd );
- // Bug 34888: If content is selected which doesn't take space
- // away (i.e. PostIts, RefMarks, TOXMarks), then at
- // least set the width of the Crsr.
- if( 1 == (aTmp.*fnRect->fnGetWidth)() &&
- pStartPos->nContent.GetIndex() !=
- pEndPos->nContent.GetIndex() )
+ if( aTmpSt.X() > aTmpEnd.X() )
{
- OutputDevice* pOut = pSh->GetOut();
- long nCrsrWidth = pOut->GetSettings().GetStyleSettings().
- GetCursorSize();
- (aTmp.*fnRect->fnSetWidth)( pOut->PixelToLogic(
- Size( nCrsrWidth, 0 ) ).Width() );
+ long nTmpX = aTmpEnd.X();
+ aTmpEnd.X() = aTmpSt.X();
+ aTmpSt.X() = nTmpX;
}
- aTmp.Intersection( aStFrm );
- Sub( aRegion, aTmp );
}
- //case 2: (Same frame, but not the same line)
- else
- {
- SwTwips lLeft, lRight;
- if( pSt2Pos && pEnd2Pos && pSt2Pos->aPortion == pEnd2Pos->aPortion )
- {
- lLeft = (pSt2Pos->aPortion.*fnRect->fnGetLeft)();
- lRight = (pSt2Pos->aPortion.*fnRect->fnGetRight)();
- }
- else
- {
- lLeft = (pStartFrm->Frm().*fnRect->fnGetLeft)() +
- (pStartFrm->Prt().*fnRect->fnGetLeft)();
- lRight = (pStartFrm->Frm().*fnRect->fnGetLeft)() +
- (pStartFrm->Prt().*fnRect->fnGetRight)();
- }
- if( lLeft < (aStFrm.*fnRect->fnGetLeft)() )
- lLeft = (aStFrm.*fnRect->fnGetLeft)();
- if( lRight > (aStFrm.*fnRect->fnGetRight)() )
- lRight = (aStFrm.*fnRect->fnGetRight)();
- SwRect aSubRect( aStRect );
- //First line
- if( bR2L )
- (aSubRect.*fnRect->fnSetLeft)( lLeft );
- else
- (aSubRect.*fnRect->fnSetRight)( lRight );
- Sub( aRegion, aSubRect );
- //If there's at least a twips between start- and endline,
- //so the whole area between will be added.
- SwTwips aTmpBottom = (aStRect.*fnRect->fnGetBottom)();
- SwTwips aTmpTop = (aEndRect.*fnRect->fnGetTop)();
- if( aTmpBottom != aTmpTop )
- {
- (aSubRect.*fnRect->fnSetLeft)( lLeft );
- (aSubRect.*fnRect->fnSetRight)( lRight );
- (aSubRect.*fnRect->fnSetTop)( aTmpBottom );
- (aSubRect.*fnRect->fnSetBottom)( aTmpTop );
- Sub( aRegion, aSubRect );
- }
- //and the last line
- aSubRect = aEndRect;
- if( bR2L )
- (aSubRect.*fnRect->fnSetRight)( lRight );
- else
- (aSubRect.*fnRect->fnSetLeft)( lLeft );
- Sub( aRegion, aSubRect );
+ SwRect aTmp = SwRect( aTmpSt, aTmpEnd );
+ // Bug 34888: If content is selected which doesn't take space
+ // away (i.e. PostIts, RefMarks, TOXMarks), then at
+ // least set the width of the Crsr.
+ if( 1 == (aTmp.*fnRect->fnGetWidth)() &&
+ pStartPos->nContent.GetIndex() !=
+ pEndPos->nContent.GetIndex() )
+ {
+ OutputDevice* pOut = pSh->GetOut();
+ long nCrsrWidth = pOut->GetSettings().GetStyleSettings().
+ GetCursorSize();
+ (aTmp.*fnRect->fnSetWidth)( pOut->PixelToLogic(
+ Size( nCrsrWidth, 0 ) ).Width() );
}
+ aTmp.Intersection( aStFrm );
+ Sub( aRegion, aTmp );
}
- //case 3: (Different frames, maybe with other frames between)
+ //case 2: (Same frame, but not the same line)
else
{
- //The startframe first...
+ SwTwips lLeft, lRight;
+ if( pSt2Pos && pEnd2Pos && pSt2Pos->aPortion == pEnd2Pos->aPortion )
+ {
+ lLeft = (pSt2Pos->aPortion.*fnRect->fnGetLeft)();
+ lRight = (pSt2Pos->aPortion.*fnRect->fnGetRight)();
+ }
+ else
+ {
+ lLeft = (pStartFrm->Frm().*fnRect->fnGetLeft)() +
+ (pStartFrm->Prt().*fnRect->fnGetLeft)();
+ lRight = (pStartFrm->Frm().*fnRect->fnGetLeft)() +
+ (pStartFrm->Prt().*fnRect->fnGetRight)();
+ }
+ if( lLeft < (aStFrm.*fnRect->fnGetLeft)() )
+ lLeft = (aStFrm.*fnRect->fnGetLeft)();
+ if( lRight > (aStFrm.*fnRect->fnGetRight)() )
+ lRight = (aStFrm.*fnRect->fnGetRight)();
SwRect aSubRect( aStRect );
+ //First line
if( bR2L )
- (aSubRect.*fnRect->fnSetLeft)( (aStFrm.*fnRect->fnGetLeft)());
+ (aSubRect.*fnRect->fnSetLeft)( lLeft );
else
- (aSubRect.*fnRect->fnSetRight)( (aStFrm.*fnRect->fnGetRight)());
+ (aSubRect.*fnRect->fnSetRight)( lRight );
Sub( aRegion, aSubRect );
- SwTwips nTmpTwips = (aStRect.*fnRect->fnGetBottom)();
- if( (aStFrm.*fnRect->fnGetBottom)() != nTmpTwips )
+
+ //If there's at least a twips between start- and endline,
+ //so the whole area between will be added.
+ SwTwips aTmpBottom = (aStRect.*fnRect->fnGetBottom)();
+ SwTwips aTmpTop = (aEndRect.*fnRect->fnGetTop)();
+ if( aTmpBottom != aTmpTop )
{
- aSubRect = aStFrm;
- (aSubRect.*fnRect->fnSetTop)( nTmpTwips );
+ (aSubRect.*fnRect->fnSetLeft)( lLeft );
+ (aSubRect.*fnRect->fnSetRight)( lRight );
+ (aSubRect.*fnRect->fnSetTop)( aTmpBottom );
+ (aSubRect.*fnRect->fnSetBottom)( aTmpTop );
Sub( aRegion, aSubRect );
}
+ //and the last line
+ aSubRect = aEndRect;
+ if( bR2L )
+ (aSubRect.*fnRect->fnSetRight)( lRight );
+ else
+ (aSubRect.*fnRect->fnSetLeft)( lLeft );
+ Sub( aRegion, aSubRect );
+ }
+ }
+ //case 3: (Different frames, maybe with other frames between)
+ else
+ {
+ //The startframe first...
+ SwRect aSubRect( aStRect );
+ if( bR2L )
+ (aSubRect.*fnRect->fnSetLeft)( (aStFrm.*fnRect->fnGetLeft)());
+ else
+ (aSubRect.*fnRect->fnSetRight)( (aStFrm.*fnRect->fnGetRight)());
+ Sub( aRegion, aSubRect );
+ SwTwips nTmpTwips = (aStRect.*fnRect->fnGetBottom)();
+ if( (aStFrm.*fnRect->fnGetBottom)() != nTmpTwips )
+ {
+ aSubRect = aStFrm;
+ (aSubRect.*fnRect->fnSetTop)( nTmpTwips );
+ Sub( aRegion, aSubRect );
+ }
- //Now the frames between, if there are any
- bool const bBody = pStartFrm->IsInDocBody();
- const SwTableBox* pCellBox = pStartFrm->GetUpper()->IsCellFrm() ?
- ((SwCellFrm*)pStartFrm->GetUpper())->GetTabBox() : 0;
- if (pSh->IsSelectAll())
- pCellBox = 0;
+ //Now the frames between, if there are any
+ bool const bBody = pStartFrm->IsInDocBody();
+ const SwTableBox* pCellBox = pStartFrm->GetUpper()->IsCellFrm() ?
+ ((SwCellFrm*)pStartFrm->GetUpper())->GetTabBox() : 0;
+ if (pSh->IsSelectAll())
+ pCellBox = 0;
- const SwCntntFrm *pCntnt = pStartFrm->GetNextCntntFrm();
- SwRect aPrvRect;
+ const SwCntntFrm *pCntnt = pStartFrm->GetNextCntntFrm();
+ SwRect aPrvRect;
- OSL_ENSURE( pCntnt,
- "<SwRootFrm::CalcFrmRects(..)> - no content frame. This is a serious defect -> please inform OD" );
- while ( pCntnt && pCntnt != pEndFrm )
+ OSL_ENSURE( pCntnt,
+ "<SwRootFrm::CalcFrmRects(..)> - no content frame. This is a serious defect -> please inform OD" );
+ while ( pCntnt && pCntnt != pEndFrm )
+ {
+ if ( pCntnt->IsInFly() )
{
- if ( pCntnt->IsInFly() )
- {
- const SwAnchoredObject* pObj = pCntnt->FindFlyFrm();
- aSortObjs.Insert( *(const_cast<SwAnchoredObject*>(pObj)) );
- }
+ const SwAnchoredObject* pObj = pCntnt->FindFlyFrm();
+ aSortObjs.Insert( *(const_cast<SwAnchoredObject*>(pObj)) );
+ }
- // Consider only frames which have the same IsInDocBody value like pStartFrm
- // If pStartFrm is inside a SwCellFrm, consider only frames which are inside the
- // same cell frame (or its follow cell)
- const SwTableBox* pTmpCellBox = pCntnt->GetUpper()->IsCellFrm() ?
- ((SwCellFrm*)pCntnt->GetUpper())->GetTabBox() : 0;
- if (pSh->IsSelectAll())
- pTmpCellBox = 0;
- if ( bBody == pCntnt->IsInDocBody() &&
- ( !pCellBox || pCellBox == pTmpCellBox ) )
+ // Consider only frames which have the same IsInDocBody value like pStartFrm
+ // If pStartFrm is inside a SwCellFrm, consider only frames which are inside the
+ // same cell frame (or its follow cell)
+ const SwTableBox* pTmpCellBox = pCntnt->GetUpper()->IsCellFrm() ?
+ ((SwCellFrm*)pCntnt->GetUpper())->GetTabBox() : 0;
+ if (pSh->IsSelectAll())
+ pTmpCellBox = 0;
+ if ( bBody == pCntnt->IsInDocBody() &&
+ ( !pCellBox || pCellBox == pTmpCellBox ) )
+ {
+ SwRect aCRect( pCntnt->UnionFrm( true ) );
+ aCRect.Intersection( pCntnt->PaintArea() );
+ if( aCRect.IsOver( aRegion.GetOrigin() ))
{
- SwRect aCRect( pCntnt->UnionFrm( true ) );
- aCRect.Intersection( pCntnt->PaintArea() );
- if( aCRect.IsOver( aRegion.GetOrigin() ))
+ SwRect aTmp( aPrvRect );
+ aTmp.Union( aCRect );
+ if ( (aPrvRect.Height() * aPrvRect.Width() +
+ aCRect.Height() * aCRect.Width()) ==
+ (aTmp.Height() * aTmp.Width()) )
{
- SwRect aTmp( aPrvRect );
- aTmp.Union( aCRect );
- if ( (aPrvRect.Height() * aPrvRect.Width() +
- aCRect.Height() * aCRect.Width()) ==
- (aTmp.Height() * aTmp.Width()) )
- {
- aPrvRect.Union( aCRect );
- }
- else
- {
- if ( aPrvRect.HasArea() )
- Sub( aRegion, aPrvRect );
- aPrvRect = aCRect;
- }
+ aPrvRect.Union( aCRect );
+ }
+ else
+ {
+ if ( aPrvRect.HasArea() )
+ Sub( aRegion, aPrvRect );
+ aPrvRect = aCRect;
}
}
- pCntnt = pCntnt->GetNextCntntFrm();
- OSL_ENSURE( pCntnt,
- "<SwRootFrm::CalcFrmRects(..)> - no content frame. This is a serious defect!" );
}
- if ( aPrvRect.HasArea() )
- Sub( aRegion, aPrvRect );
-
- //At least the endframe...
- bVert = pEndFrm->IsVertical();
- bRev = pEndFrm->IsReverse();
- fnRect = bVert ? ( bRev ? fnRectVL2R : ( pEndFrm->IsVertLR() ? fnRectVertL2R : fnRectVert ) ) :
- ( bRev ? fnRectB2T : fnRectHori );
- nTmpTwips = (aEndRect.*fnRect->fnGetTop)();
- if( (aEndFrm.*fnRect->fnGetTop)() != nTmpTwips )
- {
- aSubRect = aEndFrm;
- (aSubRect.*fnRect->fnSetBottom)( nTmpTwips );
- Sub( aRegion, aSubRect );
- }
- aSubRect = aEndRect;
- if( bEndR2L )
- (aSubRect.*fnRect->fnSetRight)((aEndFrm.*fnRect->fnGetRight)());
- else
- (aSubRect.*fnRect->fnSetLeft)( (aEndFrm.*fnRect->fnGetLeft)() );
+ pCntnt = pCntnt->GetNextCntntFrm();
+ OSL_ENSURE( pCntnt,
+ "<SwRootFrm::CalcFrmRects(..)> - no content frame. This is a serious defect!" );
+ }
+ if ( aPrvRect.HasArea() )
+ Sub( aRegion, aPrvRect );
+
+ //At least the endframe...
+ bVert = pEndFrm->IsVertical();
+ bRev = pEndFrm->IsReverse();
+ fnRect = bVert ? ( bRev ? fnRectVL2R : ( pEndFrm->IsVertLR() ? fnRectVertL2R : fnRectVert ) ) :
+ ( bRev ? fnRectB2T : fnRectHori );
+ nTmpTwips = (aEndRect.*fnRect->fnGetTop)();
+ if( (aEndFrm.*fnRect->fnGetTop)() != nTmpTwips )
+ {
+ aSubRect = aEndFrm;
+ (aSubRect.*fnRect->fnSetBottom)( nTmpTwips );
Sub( aRegion, aSubRect );
}
-
- aRegion.Invert();
- delete pSt2Pos;
- delete pEnd2Pos;
+ aSubRect = aEndRect;
+ if( bEndR2L )
+ (aSubRect.*fnRect->fnSetRight)((aEndFrm.*fnRect->fnGetRight)());
+ else
+ (aSubRect.*fnRect->fnSetLeft)( (aEndFrm.*fnRect->fnGetLeft)() );
+ Sub( aRegion, aSubRect );
}
+ aRegion.Invert();
+ delete pSt2Pos;
+ delete pEnd2Pos;
+
// Cut out Flys during loop. We don't cut out Flys when:
// - the Lower is StartFrm/EndFrm (FlyInCnt and all other Flys which again
// sit in it)
More information about the Libreoffice-commits
mailing list