[Libreoffice-commits] core.git: setup_native/source sfx2/source shell/inc slideshow/source solenv/bin solenv/gbuild soltools/cpp starmath/source stoc/source svgio/inc svl/source svtools/source svx/inc svx/source
Andrea Gelmini
andrea.gelmini at gelma.net
Sat Jul 4 03:21:34 PDT 2015
setup_native/source/win32/wintools/msidb/msidb.c | 2 +-
sfx2/source/appl/appopen.cxx | 2 +-
sfx2/source/appl/newhelp.cxx | 2 +-
sfx2/source/appl/workwin.cxx | 2 +-
sfx2/source/control/dispatch.cxx | 6 +++---
sfx2/source/dialog/mailmodel.cxx | 2 +-
sfx2/source/doc/DocumentMetadataAccess.cxx | 2 +-
sfx2/source/doc/doctempl.cxx | 2 +-
sfx2/source/doc/objcont.cxx | 2 +-
sfx2/source/doc/objstor.cxx | 2 +-
sfx2/source/doc/printhelper.cxx | 8 ++++----
sfx2/source/menu/virtmenu.cxx | 2 +-
sfx2/source/statbar/stbitem.cxx | 2 +-
shell/inc/internal/types.hxx | 2 +-
slideshow/source/engine/effectrewinder.hxx | 2 +-
solenv/bin/modules/installer/parameter.pm | 4 +---
solenv/gbuild/TargetLocations.mk | 2 +-
soltools/cpp/_lex.c | 2 +-
soltools/cpp/_unix.c | 2 +-
soltools/cpp/cpp.h | 2 +-
starmath/source/mathmlexport.cxx | 4 ++--
starmath/source/mathtype.cxx | 2 +-
stoc/source/servicemanager/servicemanager.cxx | 2 +-
svgio/inc/svgio/svgreader/svgnode.hxx | 2 +-
svgio/inc/svgio/svgreader/svgstyleattributes.hxx | 2 +-
svl/source/filerec/filerec.cxx | 4 ++--
svl/source/items/itemset.cxx | 2 +-
svl/source/items/poolio.cxx | 2 +-
svl/source/numbers/supservs.cxx | 2 +-
svl/source/numbers/zforfind.cxx | 2 +-
svl/source/numbers/zforfind.hxx | 2 +-
svl/source/passwordcontainer/passwordcontainer.cxx | 2 +-
svtools/source/config/optionsdrawinglayer.cxx | 2 +-
svtools/source/control/inettbc.cxx | 2 +-
svtools/source/svrtf/svparser.cxx | 2 +-
svtools/source/table/mousefunction.cxx | 2 +-
svtools/source/uno/genericunodialog.cxx | 2 +-
svx/inc/galtheme.hrc | 2 +-
svx/inc/sdr/primitive2d/sdrtextprimitive2d.hxx | 2 +-
svx/source/accessibility/AccessibleControlShape.cxx | 2 +-
svx/source/accessibility/ChildrenManagerImpl.hxx | 2 +-
svx/source/dialog/measctrl.cxx | 2 +-
svx/source/engine3d/float3d.cxx | 2 +-
svx/source/engine3d/scene3d.cxx | 2 +-
svx/source/fmcomp/gridctrl.cxx | 2 +-
svx/source/form/fmshimp.cxx | 4 ++--
svx/source/form/fmsrcimp.cxx | 2 +-
svx/source/form/navigatortree.cxx | 2 +-
svx/source/form/navigatortreemodel.cxx | 2 +-
svx/source/sdr/contact/viewobjectcontactofunocontrol.cxx | 4 ++--
svx/source/sdr/properties/attributeproperties.cxx | 2 +-
svx/source/svdraw/svdedtv1.cxx | 2 +-
svx/source/svdraw/svdundo.cxx | 2 +-
svx/source/toolbars/extrusionbar.cxx | 2 +-
svx/source/unodraw/unoshap2.cxx | 2 +-
svx/source/unodraw/unoshape.cxx | 4 ++--
svx/source/xoutdev/xtabdash.cxx | 2 +-
57 files changed, 67 insertions(+), 69 deletions(-)
New commits:
commit 0b7d51df3b4ce49f318dd9091df0bf7ba37cdd99
Author: Andrea Gelmini <andrea.gelmini at gelma.net>
Date: Thu Jul 2 18:25:02 2015 +0200
Fix typos
Change-Id: Ic6415423f46aaee7ba90239a617c318cf92ae222
Reviewed-on: https://gerrit.libreoffice.org/16711
Tested-by: Jenkins <ci at libreoffice.org>
Reviewed-by: Samuel Mehrbrodt <s.mehrbrodt at gmail.com>
diff --git a/setup_native/source/win32/wintools/msidb/msidb.c b/setup_native/source/win32/wintools/msidb/msidb.c
index ea1c5ba..b4242e1 100644
--- a/setup_native/source/win32/wintools/msidb/msidb.c
+++ b/setup_native/source/win32/wintools/msidb/msidb.c
@@ -492,7 +492,7 @@ int wmain(int argc, WCHAR *argv[])
argv++; argc--; i++;
}
break;
- case 'c': /* Create/ovrwrt .msi db */
+ case 'c': /* Create/overwrite .msi db */
createdb = TRUE;
break;
case 'f': /* Specify working dir */
diff --git a/sfx2/source/appl/appopen.cxx b/sfx2/source/appl/appopen.cxx
index 4ac17df..8664128 100644
--- a/sfx2/source/appl/appopen.cxx
+++ b/sfx2/source/appl/appopen.cxx
@@ -214,7 +214,7 @@ sal_uInt32 CheckPasswd_Impl
{
// TODO/LATER:
// the storage either has no encrypted elements or it's just
- // does not allow to detect it, probably it should be implemented laiter
+ // does not allow to detect it, probably it should be implemented later
}
if ( bIsEncrypted )
diff --git a/sfx2/source/appl/newhelp.cxx b/sfx2/source/appl/newhelp.cxx
index c936655..daf697c 100644
--- a/sfx2/source/appl/newhelp.cxx
+++ b/sfx2/source/appl/newhelp.cxx
@@ -681,7 +681,7 @@ void IndexTabPage_Impl::InitializeIndex()
else
aIndex.clear();
- // Assume the token is trimed
+ // Assume the token is trimmed
UNIFY_AND_INSERT_TOKEN( aKeywordPair );
sal_uInt32 nRefListLen = aRefList.getLength();
diff --git a/sfx2/source/appl/workwin.cxx b/sfx2/source/appl/workwin.cxx
index 1bf8e32..93bf4df 100644
--- a/sfx2/source/appl/workwin.cxx
+++ b/sfx2/source/appl/workwin.cxx
@@ -78,7 +78,7 @@ static const ResIdToResName pToolBarResToName[] =
{ 18001, "formsnavigationbar" }, // Probably the rest are defined in .hrc files that are higher
// up in the dependency chain and/or later in the build order,
// and that is the (bad) reason why their symbolic names are
- // not available? Would it really be so owful to move the .hrc
+ // not available? Would it really be so awful to move the .hrc
// files in question out from the modules where they now are?
{ 18002, "formsfilterbar" },
diff --git a/sfx2/source/control/dispatch.cxx b/sfx2/source/control/dispatch.cxx
index 64a6cb5..109d336 100644
--- a/sfx2/source/control/dispatch.cxx
+++ b/sfx2/source/control/dispatch.cxx
@@ -1266,8 +1266,8 @@ void SfxDispatcher::_Update_Impl( bool bUIActive, bool bIsMDIApp, bool bIsIPOwne
xImp->aObjBars[n].nResId = 0;
xImp->aChildWins.clear();
- // bQuiet : own shells aren't considered for UI and SlotServer
- // bNoUI: own Shells aren't considered fors UI
+ // bQuiet: own shells aren't considered for UI and SlotServer
+ // bNoUI: own Shells aren't considered forms UI
if ( xImp->bQuiet || xImp->bNoUI || (xImp->pFrame && xImp->pFrame->GetObjectShell()->IsPreview()) )
return;
@@ -1538,7 +1538,7 @@ void SfxDispatcher::FlushImpl()
// If more changes have occurred on the stach when
// Activate/Deactivate/Delete:
if (!xImp->bFlushed)
- // If Push/Pop hs been called by someone, theb also EnterReg was called!
+ // If Push/Pop has been called by someone, then also EnterReg was called!
FlushImpl();
if( bAwakeBindings && GetBindings() )
diff --git a/sfx2/source/dialog/mailmodel.cxx b/sfx2/source/dialog/mailmodel.cxx
index b0cdda7..6b31c59 100644
--- a/sfx2/source/dialog/mailmodel.cxx
+++ b/sfx2/source/dialog/mailmodel.cxx
@@ -567,7 +567,7 @@ SfxMailModel::SaveResult SfxMailModel::SaveDocumentAsFormat(
}
}
- //check if this is the pdf otput filter (i#64555)
+ //check if this is the pdf output filter (i#64555)
if( bSendAsPDF )
{
SaveResult eShowPDFFilterDialog = ShowFilterOptionsDialog(
diff --git a/sfx2/source/doc/DocumentMetadataAccess.cxx b/sfx2/source/doc/DocumentMetadataAccess.cxx
index 228f578..d6130df 100644
--- a/sfx2/source/doc/DocumentMetadataAccess.cxx
+++ b/sfx2/source/doc/DocumentMetadataAccess.cxx
@@ -1262,7 +1262,7 @@ throw (uno::RuntimeException, lang::IllegalArgumentException,
if (!xIn.is() && URL.isEmpty()) {
throw lang::IllegalArgumentException(
"DocumentMetadataAccess::loadMetadataFromMedium: "
- "inalid medium: no URL, no input stream", *this, 0);
+ "invalid medium: no URL, no input stream", *this, 0);
}
uno::Reference<embed::XStorage> xStorage;
try {
diff --git a/sfx2/source/doc/doctempl.cxx b/sfx2/source/doc/doctempl.cxx
index 140e62c..38ca442 100644
--- a/sfx2/source/doc/doctempl.cxx
+++ b/sfx2/source/doc/doctempl.cxx
@@ -615,7 +615,7 @@ bool SfxDocumentTemplates::CopyOrMove
else
{
if ( xTemplates->removeTemplate( pTargetRgn->GetTitle(), aTitle ) )
- return false; // will trigger tetry with copy instead of move
+ return false; // will trigger retry with copy instead of move
// if it is not possible to remove just created template ( must be possible! )
// it is better to report success here, since at least the copy has succeeded
diff --git a/sfx2/source/doc/objcont.cxx b/sfx2/source/doc/objcont.cxx
index c7d5cde..16c573e 100644
--- a/sfx2/source/doc/objcont.cxx
+++ b/sfx2/source/doc/objcont.cxx
@@ -233,7 +233,7 @@ void SfxObjectShell::UpdateTime_Impl(
util::Duration editDuration(sal_False, 0, 0, 0,
secs/3600, (secs%3600)/60, secs%60, 0);
- // Initialize some local member! Its necessary for wollow operations!
+ // Initialize some local member! Its necessary for follow operations!
DateTime aNow( DateTime::SYSTEM ); // Date and time at current moment
tools::Time n24Time (24,0,0,0) ; // Time-value for 24 hours - see follow calculation
sal_uIntPtr nDays = 0 ; // Count of days between now and last editing
diff --git a/sfx2/source/doc/objstor.cxx b/sfx2/source/doc/objstor.cxx
index ae51fb7..cfaa651 100644
--- a/sfx2/source/doc/objstor.cxx
+++ b/sfx2/source/doc/objstor.cxx
@@ -1795,7 +1795,7 @@ bool SfxObjectShell::DisconnectStorage_Impl( SfxMedium& rSrcMedium, SfxMedium& r
{
// the following call will only compare stream sizes
// TODO/LATER: this is a very risky part, since if the URL contents are different from the storage
- // contents, the storag will be broken
+ // contents, the storage will be broken
xOptStorage->attachToURL( aBackupURL, sal_True );
// the storage is successfully attached to backup, thus it is owned by the document not by the medium
diff --git a/sfx2/source/doc/printhelper.cxx b/sfx2/source/doc/printhelper.cxx
index 791fbea..be3825a0 100644
--- a/sfx2/source/doc/printhelper.cxx
+++ b/sfx2/source/doc/printhelper.cxx
@@ -470,8 +470,8 @@ void SAL_CALL SfxPrintHelper::setPrinter(const uno::Sequence< beans::PropertyVal
/* This implements a thread which will be started to wait for asynchronous
- print jobs to temp. localy files. If they finish we move the temp. files
- to her right locations by using the ucb.
+ print jobs to temp. locally files. If they finish we move the temp. files
+ to their right locations by using the ucb.
*/
class ImplUCBPrintWatcher : public ::osl::Thread
{
@@ -509,7 +509,7 @@ class ImplUCBPrintWatcher : public ::osl::Thread
/* } SAFE */
// lock for further using of our member isn't necessary - because
- // we truns alone by defenition. Nobody join for us nor use us ...
+ // we run alone by definition. Nobody join for us nor use us...
moveAndDeleteTemp(&m_pTempFile,m_sTargetURL);
// finishing of this run() method will call onTerminate() automatically
@@ -787,7 +787,7 @@ void SAL_CALL SfxPrintHelper::print(const uno::Sequence< beans::PropertyValue >&
// b)
else
{
- // Note: we create(d) some resource on the heap. (thread and tep file)
+ // Note: we create(d) some resource on the heap (thread and temp file).
// They will be deleted by the thread automatically if he finish his run() method.
ImplUCBPrintWatcher* pWatcher = new ImplUCBPrintWatcher( pPrinter, pUCBPrintTempFile, sUcbUrl );
pWatcher->create();
diff --git a/sfx2/source/menu/virtmenu.cxx b/sfx2/source/menu/virtmenu.cxx
index 85defbf..4adda62 100644
--- a/sfx2/source/menu/virtmenu.cxx
+++ b/sfx2/source/menu/virtmenu.cxx
@@ -782,7 +782,7 @@ IMPL_LINK_TYPED( SfxVirtualMenu, Activate, Menu *, pMenu, bool )
<< pSVMenu);
// MI: for what was it still good for?
- // MBA: seemes to be an old QAP-Hack( checked-in in rev.1.41 ! )
+ // MBA: seems to be an old QAP-Hack (checked-in in rev.1.41!)
if ( pMenu )
{
diff --git a/sfx2/source/statbar/stbitem.cxx b/sfx2/source/statbar/stbitem.cxx
index 204fee2..5a18661 100644
--- a/sfx2/source/statbar/stbitem.cxx
+++ b/sfx2/source/statbar/stbitem.cxx
@@ -426,7 +426,7 @@ void SfxStatusBarControl::StateChanged
sal_uInt16 nSID,
SfxItemState eState,
const SfxPoolItem* pState /* Pointer to SfxPoolItem, is only valid
- withih this Method call. This can be a
+ within this Method call. This can be a
Null-Pointer, a Pointer to SfxVoidItem
or of this Type found registered by the
Subclass of SfxStatusBarControl.
diff --git a/shell/inc/internal/types.hxx b/shell/inc/internal/types.hxx
index d147004..1a6c32d 100644
--- a/shell/inc/internal/types.hxx
+++ b/shell/inc/internal/types.hxx
@@ -62,7 +62,7 @@ const Chunk_t EMPTY_CHUNK = ::std::make_pair( EMPTY_LOCALE, ::std::wstring());
//+-------------------------------------------------------------------------
// Declare: StyleName_t, style name of a style-locale pair.
-// StyleLocaleMap, the map of Styple-Locale pair.
+// StyleLocaleMap, the map of Style-Locale pair.
// Contents: Definitions of Style Names.
typedef ::std::wstring StyleName_t;
diff --git a/slideshow/source/engine/effectrewinder.hxx b/slideshow/source/engine/effectrewinder.hxx
index e44a63f..2fba401 100644
--- a/slideshow/source/engine/effectrewinder.hxx
+++ b/slideshow/source/engine/effectrewinder.hxx
@@ -55,7 +55,7 @@ public:
UserEventQueue& rUserEventQueue);
~EffectRewinder();
- /** Call Dispose() before the ownder of an EffectRewinder object dies so
+ /** Call Dispose() before the owner of an EffectRewinder object dies so
that the EffectRewinder can release all references to the owner.
*/
diff --git a/solenv/bin/modules/installer/parameter.pm b/solenv/bin/modules/installer/parameter.pm
index d32df73..bb98b7c 100644
--- a/solenv/bin/modules/installer/parameter.pm
+++ b/solenv/bin/modules/installer/parameter.pm
@@ -230,10 +230,8 @@ sub make_path_absolute
$$pathref =~ s/[\/\\]\s*$//; # removing ending slashes
}
-##################################################
# Setting some global parameters
-# This has to be expanded with furher platforms
-##################################################
+# This has to be expanded with further platforms
sub setglobalvariables
{
diff --git a/solenv/gbuild/TargetLocations.mk b/solenv/gbuild/TargetLocations.mk
index 82857a9..10955c4 100644
--- a/solenv/gbuild/TargetLocations.mk
+++ b/solenv/gbuild/TargetLocations.mk
@@ -19,7 +19,7 @@
# outdir target pattern
-# thoese are hard-coded to URE for now since there are so few of them...
+# these are hard-coded to URE for now since there are so few of them...
gb_CliLibrary_get_target = $(INSTROOT)/$(LIBO_URE_LIB_FOLDER)/$(1)$(gb_CliLibrary_EXT)
gb_CliNativeLibrary_get_target = $(INSTROOT)/$(LIBO_URE_LIB_FOLDER)/$(1)$(gb_CliNativeLibrary_EXT)
gb_CliUnoApi_get_target = $(INSTROOT)/$(if $(filter cli_uretypes,$(1)),$(LIBO_URE_LIB_FOLDER),$(LIBO_LIB_FOLDER))/$(1)$(gb_CliUnoApi_EXT)
diff --git a/soltools/cpp/_lex.c b/soltools/cpp/_lex.c
index 3c35320..4a9dcc7 100644
--- a/soltools/cpp/_lex.c
+++ b/soltools/cpp/_lex.c
@@ -597,7 +597,7 @@ int
{
int n = 1;
- /* skip pending wihite spaces */
+ /* skip pending white spaces */
while ((s->inp[n] == ' ') || (s->inp[n] == '\t'))
{
n++;
diff --git a/soltools/cpp/_unix.c b/soltools/cpp/_unix.c
index fa8abff..d68eed4 100644
--- a/soltools/cpp/_unix.c
+++ b/soltools/cpp/_unix.c
@@ -39,7 +39,7 @@
int Pflag = 0; /* print no line information */
int Iflag = 0; /* print includes */
-int Mflag = 0; /* print macor expansion */
+int Mflag = 0; /* print macro expansion */
int Aflag = 0; /* translate character sets */
int Xflag = 0; /* print pragma for include/import */
int Vflag = 0; /* verbose flag */
diff --git a/soltools/cpp/cpp.h b/soltools/cpp/cpp.h
index 5e57118..dcf01e5 100644
--- a/soltools/cpp/cpp.h
+++ b/soltools/cpp/cpp.h
@@ -21,7 +21,7 @@
#include <string.h>
#define INS 32768 /* input buffer */
-#define OBS 8092 /* outbut buffer */
+#define OBS 8092 /* output buffer */
#define NARG 32 /* Max number arguments to a macro */
#define NINCLUDE 48 /* Max number of include directories (-I) */
#define NIF 64 /* depth of nesting of #if */
diff --git a/starmath/source/mathmlexport.cxx b/starmath/source/mathmlexport.cxx
index a08750b..471e0e3 100644
--- a/starmath/source/mathmlexport.cxx
+++ b/starmath/source/mathmlexport.cxx
@@ -19,7 +19,7 @@
/*
Warning: The SvXMLElementExport helper class creates the beginning and
- closing tags of xml elements in its constructor and destructor, so theres
+ closing tags of xml elements in its constructor and destructor, so there's
hidden stuff going on, on occasion the ordering of these classes declarations
may be significant
*/
@@ -1211,7 +1211,7 @@ void SmXMLExport::ExportFont(const SmNode *pNode, int nLevel)
default:
SAL_WARN("starmath", "unexpected case");
}
- // According to the parser every node that is to be evaluated heres
+ // According to the parser every node that is to be evaluated here
// has a single non-zero subnode at index 1!! Thus we only need to check
// that single node for follow-up nodes that have an effect on the attribute.
if (pNode->GetNumSubNodes() > 1 && pNode->GetSubNode(1) &&
diff --git a/starmath/source/mathtype.cxx b/starmath/source/mathtype.cxx
index b3dccf7..5948272 100644
--- a/starmath/source/mathtype.cxx
+++ b/starmath/source/mathtype.cxx
@@ -68,7 +68,7 @@ void MathType::Init()
General solution required to force starmath to handle
unicode math chars the way it handles its own math
- chars rathar than handle them as text as it will do
+ chars rather than handle them as text as it will do
for the default case below, i.e. incorrect spacing
between math symbols and ordinary text e.g. 1=2 rather
than 1 = 2
diff --git a/stoc/source/servicemanager/servicemanager.cxx b/stoc/source/servicemanager/servicemanager.cxx
index b84dd9d..8a85e15 100644
--- a/stoc/source/servicemanager/servicemanager.cxx
+++ b/stoc/source/servicemanager/servicemanager.cxx
@@ -398,7 +398,7 @@ public:
virtual Reference<XInterface > SAL_CALL createInstance(const OUString &) throw(css::uno::Exception, css::uno::RuntimeException, std::exception) SAL_OVERRIDE;
virtual Reference<XInterface > SAL_CALL createInstanceWithArguments(const OUString &, const Sequence<Any >& Arguments) throw(css::uno::Exception, css::uno::RuntimeException, std::exception) SAL_OVERRIDE;
- // The same as the getAvailableServiceNames, but only uique names
+ // The same as the getAvailableServiceNames, but only unique names
Sequence< OUString > getUniqueAvailableServiceNames(
HashSet_OWString & aNameSet );
diff --git a/svgio/inc/svgio/svgreader/svgnode.hxx b/svgio/inc/svgio/svgreader/svgnode.hxx
index d8e488d..81d62d3 100644
--- a/svgio/inc/svgio/svgreader/svgnode.hxx
+++ b/svgio/inc/svgio/svgreader/svgnode.hxx
@@ -78,7 +78,7 @@ namespace svgio
};
// helper to convert a string associated with a token of type SVGTokenDisplay
- // to the enum Display. Empty trings return the default 'Display_inline' with
+ // to the enum Display. Empty strings return the default 'Display_inline' with
// which members should be initialized
Display getDisplayFromContent(const OUString& aContent);
diff --git a/svgio/inc/svgio/svgreader/svgstyleattributes.hxx b/svgio/inc/svgio/svgreader/svgstyleattributes.hxx
index ac3fbf8..5a67aa1 100644
--- a/svgio/inc/svgio/svgreader/svgstyleattributes.hxx
+++ b/svgio/inc/svgio/svgreader/svgstyleattributes.hxx
@@ -223,7 +223,7 @@ namespace svgio
// defines if this attributes are part of a ClipPath. If yes,
// rough geometry will be created on decomposition by patching
- // vaules for fill, stroke, strokeWidth and others
+ // values for fill, stroke, strokeWidth and others
bool mbIsClipPathContent : 1;
// #121221# Defines if evtl. an empty array *is* set
diff --git a/svl/source/filerec/filerec.cxx b/svl/source/filerec/filerec.cxx
index 3c02645..c68a8c6 100644
--- a/svl/source/filerec/filerec.cxx
+++ b/svl/source/filerec/filerec.cxx
@@ -107,7 +107,7 @@ bool SfxMiniRecordReader::SetHeader_Impl( sal_uInt32 nHeader )
{
bool bRet = true;
- // determine reord end and PreTag from the header
+ // determine record end and PreTag from the header
_nEofRec = _pStream->Tell() + SFX_REC_OFS(nHeader);
_nPreTag = sal::static_int_cast< sal_uInt8 >(SFX_REC_PRE(nHeader));
@@ -520,7 +520,7 @@ bool SfxMultiRecordReader::ReadHeader_Impl()
_pStream->ReadUInt16( _nContentCount );
_pStream->ReadUInt32( _nContentSize ); // Fix: each on its own, Var|Mix: table position
- // do we still need to rade a table with Content offsets?
+ // do we still need to read a table with Content offsets?
if ( _nRecordType != SFX_REC_TYPE_FIXSIZE )
{
// read table from the stream
diff --git a/svl/source/items/itemset.cxx b/svl/source/items/itemset.cxx
index 301bafc..8a8dafd 100644
--- a/svl/source/items/itemset.cxx
+++ b/svl/source/items/itemset.cxx
@@ -1398,7 +1398,7 @@ SvStream &SfxItemSet::Store
* This method loads an SfxItemSet from a stream.
* If the SfxItemPool was loaded without RefCounts the loaded Item
* references are counted, else we assume the they were accounted for
- * when loadig the SfxItemPool.
+ * when loading the SfxItemPool.
*
* @see SfxItemSet::Store(Stream&,bool) const
*/
diff --git a/svl/source/items/poolio.cxx b/svl/source/items/poolio.cxx
index 918330f..1e0a20e 100644
--- a/svl/source/items/poolio.cxx
+++ b/svl/source/items/poolio.cxx
@@ -937,7 +937,7 @@ void SfxItemPool::SetStoringRange( sal_uInt16 nFrom, sal_uInt16 nTo )
* WhichIds. Moving WhichIds is not permitted.
* This method should only be called in or right after the ctor.
*
- * The array must be static, because its not copied and resued in the
+ * The array must be static, because its not copied and reused in the
* copy-ctor of the SfxItemPool
*
* Example usage:
diff --git a/svl/source/numbers/supservs.cxx b/svl/source/numbers/supservs.cxx
index 416ddef..6fed0a0 100644
--- a/svl/source/numbers/supservs.cxx
+++ b/svl/source/numbers/supservs.cxx
@@ -157,7 +157,7 @@ void SvNumberFormatsSupplierServiceObject::implEnsureFormatter()
SvtSysLocale aSysLocale;
css::lang::Locale aOfficeLocale = aSysLocale.GetLocaleData().getLanguageTag().getLocale();
- // initi with this locale
+ // initialize with this locale
Sequence< Any > aFakedInitProps( 1 );
aFakedInitProps[0] <<= aOfficeLocale;
diff --git a/svl/source/numbers/zforfind.cxx b/svl/source/numbers/zforfind.cxx
index ac8de66..f0b08b5 100644
--- a/svl/source/numbers/zforfind.cxx
+++ b/svl/source/numbers/zforfind.cxx
@@ -353,7 +353,7 @@ bool ImpSvNumberInputScan::SkipThousands( const sal_Unicode*& pStr,
} // switch
} // while
- if (eState == SsGetValue) // break witth less than 3 digits
+ if (eState == SsGetValue) // break with less than 3 digits
{
if ( nCounter )
{
diff --git a/svl/source/numbers/zforfind.hxx b/svl/source/numbers/zforfind.hxx
index de99dd9..a66e332 100644
--- a/svl/source/numbers/zforfind.hxx
+++ b/svl/source/numbers/zforfind.hxx
@@ -360,7 +360,7 @@ private:
bool MatchedReturn();
//! Be sure that the string to be analyzed is already converted to upper
- //! case and if it contained native humber digits that they are already
+ //! case and if it contained native number digits that they are already
//! converted to ASCII.
// Main analyzing function
diff --git a/svl/source/passwordcontainer/passwordcontainer.cxx b/svl/source/passwordcontainer/passwordcontainer.cxx
index 76b8eff..a6e8a83 100644
--- a/svl/source/passwordcontainer/passwordcontainer.cxx
+++ b/svl/source/passwordcontainer/passwordcontainer.cxx
@@ -242,7 +242,7 @@ PassMap StorageItem::getInfo()
}
}
else
- OSL_FAIL( "Wrong index sintax!\n" );
+ OSL_FAIL( "Wrong index syntax!\n" );
}
return aResult;
diff --git a/svtools/source/config/optionsdrawinglayer.cxx b/svtools/source/config/optionsdrawinglayer.cxx
index b4bd909..1b1ecc8 100644
--- a/svtools/source/config/optionsdrawinglayer.cxx
+++ b/svtools/source/config/optionsdrawinglayer.cxx
@@ -724,7 +724,7 @@ bool SvtOptionsDrawinglayer_Impl::IsAAPossibleOnThisSystem() const
pThat->m_bAllowAAChecked = true;
#ifdef WIN32
- // WIN32 uses GDIPlus with VCL forthe first incarnation; this will be enhanced
+ // WIN32 uses GDIPlus with VCL for the first incarnation; this will be enhanced
// in the future to use canvases and the canvas renderer, thus a AA-abled
// canvas needs to be checked here in the future.
// Currently, just allow AA for WIN32
diff --git a/svtools/source/control/inettbc.cxx b/svtools/source/control/inettbc.cxx
index 997ce064e..4f34198 100644
--- a/svtools/source/control/inettbc.cxx
+++ b/svtools/source/control/inettbc.cxx
@@ -313,7 +313,7 @@ void SvtMatchContext_Impl::ReadFolder( const OUString& rURL,
|| aText.endsWith("/..");
// for pure home paths ( ~username ) the '.' at the end of rMatch
- // means that it poits to root catalog
+ // means that it points to root catalog
// this is done only for file contents since home paths parsing is useful only for them
if ( bPureHomePath && rMatch == "file:///." )
{
diff --git a/svtools/source/svrtf/svparser.cxx b/svtools/source/svrtf/svparser.cxx
index 50c2313..7e1c053 100644
--- a/svtools/source/svrtf/svparser.cxx
+++ b/svtools/source/svrtf/svparser.cxx
@@ -154,7 +154,7 @@ sal_Unicode SvParser::GetNextChar()
sal_Unicode c = 0U;
// When reading muliple bytes, we don't have to care about the file
- // position when we run inti the pending state. The file position is
+ // position when we run into the pending state. The file position is
// maintained by SaveState/RestoreState.
bool bErr;
if( bSwitchToUCS2 && 0 == rInput.Tell() )
diff --git a/svtools/source/table/mousefunction.cxx b/svtools/source/table/mousefunction.cxx
index 5a17fbc..2dfbdca 100644
--- a/svtools/source/table/mousefunction.cxx
+++ b/svtools/source/table/mousefunction.cxx
@@ -39,7 +39,7 @@ namespace svt { namespace table
if ( m_nResizingColumn == COL_INVALID )
{
- // if we hit a column divider, change the mosue pointer accordingly
+ // if we hit a column divider, change the mouse pointer accordingly
Pointer aNewPointer( PointerStyle::Arrow );
TableCell const tableCell = i_tableControl.hitTest( aPoint );
if ( ( tableCell.nRow == ROW_COL_HEADERS ) && ( tableCell.eArea == ColumnDivider ) )
diff --git a/svtools/source/uno/genericunodialog.cxx b/svtools/source/uno/genericunodialog.cxx
index 4b7f82f..7f47b57a 100644
--- a/svtools/source/uno/genericunodialog.cxx
+++ b/svtools/source/uno/genericunodialog.cxx
@@ -262,7 +262,7 @@ void SAL_CALL OGenericUnoDialog::endExecute( ) throw(RuntimeException)
throw RuntimeException();
if (!m_pDialog->IsInExecute())
- // we tighly missed it ... another thread finished the execution of the dialog,
+ // we tightly missed it... another thread finished the execution of the dialog,
// but did not manage it to reset m_bExecuting, it currently tries to acquire
// m_aMutex or m_aExecutionMutex
// => nothing to do
diff --git a/svx/inc/galtheme.hrc b/svx/inc/galtheme.hrc
index 48aa054..ebcaed4 100644
--- a/svx/inc/galtheme.hrc
+++ b/svx/inc/galtheme.hrc
@@ -28,7 +28,7 @@
// These defines are used to map gallery names to translated string ressources. Since
// galleries may be copied from older offices to newer, do *never* change this
// IDs except adding new ones (and adapting RID_GALLERYSTR_THEME_LAST). The ID
-// *is* written into the binary file *.thm (which is a galler theme combined of
+// *is* written into the binary file *.thm (which is a gallery theme combined of
// three files, *.thm, *.sdv and *.sdg)
#define RID_GALLERYSTR_THEME_3D (RID_GALLERYSTR_THEME_START + 1)
diff --git a/svx/inc/sdr/primitive2d/sdrtextprimitive2d.hxx b/svx/inc/sdr/primitive2d/sdrtextprimitive2d.hxx
index d018594..e31bac9 100644
--- a/svx/inc/sdr/primitive2d/sdrtextprimitive2d.hxx
+++ b/svx/inc/sdr/primitive2d/sdrtextprimitive2d.hxx
@@ -55,7 +55,7 @@ namespace drawinglayer
// remember last VisualizingPage for which a decomposition was made. If the new target
// is not given or different, the decomposition needs to be potentially removed
// for supporting e.g. page number change on MasterPage objects or the different
- // field renderings in SubGeometry and MasterPage mnode
+ // field renderings in SubGeometry and MasterPage node
com::sun::star::uno::Reference< com::sun::star::drawing::XDrawPage > mxLastVisualizingPage;
// remember last PageNumber for which a decomposition was made. This is only used
diff --git a/svx/source/accessibility/AccessibleControlShape.cxx b/svx/source/accessibility/AccessibleControlShape.cxx
index 550e019..0e45e5f 100644
--- a/svx/source/accessibility/AccessibleControlShape.cxx
+++ b/svx/source/accessibility/AccessibleControlShape.cxx
@@ -259,7 +259,7 @@ void AccessibleControlShape::Init()
if ( m_xControlContextProxy.is() )
{
// At this point in time, the proxy has a ref count of exactly one - in m_xControlContextProxy.
- // Remember to _not_ reset this member unles the delegator of the proxy has been reset, too!
+ // Remember to _not_ reset this member unless the delegator of the proxy has been reset, too!
m_xControlContextProxy->setDelegator( *this );
}
osl_atomic_decrement( &m_refCount );
diff --git a/svx/source/accessibility/ChildrenManagerImpl.hxx b/svx/source/accessibility/ChildrenManagerImpl.hxx
index 1e0ec53..d793596 100644
--- a/svx/source/accessibility/ChildrenManagerImpl.hxx
+++ b/svx/source/accessibility/ChildrenManagerImpl.hxx
@@ -345,7 +345,7 @@ protected:
AccessibleShapeTreeInfo maShapeTreeInfo;
/** Reference to an accessible context object that is used to inform its
- listeners of new and remved children.
+ listeners of new and removed children.
*/
AccessibleContextBase& mrContext;
diff --git a/svx/source/dialog/measctrl.cxx b/svx/source/dialog/measctrl.cxx
index 19b666f..3c551c2 100644
--- a/svx/source/dialog/measctrl.cxx
+++ b/svx/source/dialog/measctrl.cxx
@@ -87,7 +87,7 @@ void SvxXMeasurePreview::dispose()
// No one is deleting the MeasureObj? This is not only an error but also
// a memory leak (!). Main problem is that this object is still listening to
// a StyleSheet of the model which was set. Thus, if You want to keep the obnject,
- // set the modfel to 0L, if object is not needed (seems to be the case here),
+ // set the model to 0L, if object is not needed (seems to be the case here),
// delete it.
delete pMeasureObj;
diff --git a/svx/source/engine3d/float3d.cxx b/svx/source/engine3d/float3d.cxx
index 455ef5e..84d6b06 100644
--- a/svx/source/engine3d/float3d.cxx
+++ b/svx/source/engine3d/float3d.cxx
@@ -982,7 +982,7 @@ void Svx3DWin::Update( SfxItemSet& rAttrs )
bUpdate = true;
}
}
- // Ligh 3 (on/off)
+ // Light 3 (on/off)
eState = rAttrs.GetItemState(SDRATTR_3DSCENE_LIGHTON_3);
if( eState != SfxItemState::DONTCARE )
{
diff --git a/svx/source/engine3d/scene3d.cxx b/svx/source/engine3d/scene3d.cxx
index a488e5e..d4c5b47 100644
--- a/svx/source/engine3d/scene3d.cxx
+++ b/svx/source/engine3d/scene3d.cxx
@@ -625,7 +625,7 @@ void E3dScene::NbcRotate(const Point& rRef, long nAngle, double sn, double cs)
// So that was the scene, now the objects used in the scene
// 3D objects, if there is only one it can still have multiple surfaces but
- // the surfaces do not hve to be connected. This allows you to access child
+ // the surfaces do not have to be connected. This allows you to access child
// objects. So going through the entire list and rotate around the Z axis
// through the enter of aOutRect's (Steiner's theorem), so RotateZ
diff --git a/svx/source/fmcomp/gridctrl.cxx b/svx/source/fmcomp/gridctrl.cxx
index 5bd3331..cdb3302 100644
--- a/svx/source/fmcomp/gridctrl.cxx
+++ b/svx/source/fmcomp/gridctrl.cxx
@@ -2056,7 +2056,7 @@ bool DbGridControl::SetCurrent(long nNewRow)
{
// to we need to move the cursor to the insert row?
// we need to insert the if the current row isn't the insert row or if the
- // cursor triggered the move by itselt and we need a reinitialization of the row
+ // cursor triggered the move by itself and we need a reinitialization of the row
Reference< XPropertySet > xCursorProps = m_pDataCursor->getPropertySet();
if ( !::comphelper::getBOOL(xCursorProps->getPropertyValue(FM_PROP_ISNEW)) )
{
diff --git a/svx/source/form/fmshimp.cxx b/svx/source/form/fmshimp.cxx
index 0d0312e..dd639bd 100644
--- a/svx/source/form/fmshimp.cxx
+++ b/svx/source/form/fmshimp.cxx
@@ -1155,7 +1155,7 @@ bool FmXFormShell::executeControlConversionSlot( const Reference< XFormComponent
aOldScripts = xEvManager->getScriptEvents(nIndex);
}
- // replace the mdoel within the parent container
+ // replace the model within the parent container
Reference< XIndexContainer> xIndexParent(xChild->getParent(), UNO_QUERY);
if (xIndexParent.is())
{
@@ -3056,7 +3056,7 @@ void FmXFormShell::stopFiltering(bool bSave)
j != rControllerList.end(); ++j)
{
if (bSave)
- { // remember the current filter settings in case we're goin to reload the forms below (which may fail)
+ { // remember the current filter settings in case we're going to reload the forms below (which may fail)
try
{
Reference< XPropertySet > xFormAsSet((*j)->getModel(), UNO_QUERY);
diff --git a/svx/source/form/fmsrcimp.cxx b/svx/source/form/fmsrcimp.cxx
index f747bca..52680c1 100644
--- a/svx/source/form/fmsrcimp.cxx
+++ b/svx/source/form/fmsrcimp.cxx
@@ -483,7 +483,7 @@ FmSearchEngine::SEARCH_RESULT FmSearchEngine::SearchWildcard(const OUString& str
Application::Reschedule();
// do 2 reschedules because of #70226# : some things done within this loop's body may cause an user event
// to be posted (deep within vcl), and these user events will be handled before any keyinput or paintings
- // or anything like that. So within each loop we create one user event and hanel one user event (and no
+ // or anything like that. So within each loop we create one user event and handle one user event (and no
// paintings and these), so the office seems to be frozen while searching.
// FS - 70226 - 02.12.99
}
diff --git a/svx/source/form/navigatortree.cxx b/svx/source/form/navigatortree.cxx
index d54ead0..a1f49fb 100644
--- a/svx/source/form/navigatortree.cxx
+++ b/svx/source/form/navigatortree.cxx
@@ -808,7 +808,7 @@ namespace svxform
// 5) a control or form will be dropped onto a control which is _not_ a sibling (dropping onto a sibling
// means moving the control)
- // collect the ancestors of the drop targte (speeds up 3)
+ // collect the ancestors of the drop target (speeds up 3)
SvLBoxEntrySortedArray arrDropAnchestors;
SvTreeListEntry* pLoop = _pTargetEntry;
while (pLoop)
diff --git a/svx/source/form/navigatortreemodel.cxx b/svx/source/form/navigatortreemodel.cxx
index bfc78c6..9bfa52b 100644
--- a/svx/source/form/navigatortreemodel.cxx
+++ b/svx/source/form/navigatortreemodel.cxx
@@ -510,7 +510,7 @@ namespace svxform
void NavigatorTreeModel::FillBranch( FmFormData* pFormData )
{
- // insert froms from root
+ // insert forms from root
if( pFormData == NULL )
{
Reference< XIndexContainer > xForms(GetForms(), UNO_QUERY);
diff --git a/svx/source/sdr/contact/viewobjectcontactofunocontrol.cxx b/svx/source/sdr/contact/viewobjectcontactofunocontrol.cxx
index 496459e..8479eeb 100644
--- a/svx/source/sdr/contact/viewobjectcontactofunocontrol.cxx
+++ b/svx/source/sdr/contact/viewobjectcontactofunocontrol.cxx
@@ -1516,7 +1516,7 @@ namespace sdr { namespace contact {
void LazyControlCreationPrimitive2D::getTransformation( const ViewContactOfUnoControl& _rVOC, ::basegfx::B2DHomMatrix& _out_Transformation )
{
// Do use model data directly to create the correct geometry. Do NOT
- // use getBoundRect()/getSnapRect() here; tese will use the sequence of
+ // use getBoundRect()/getSnapRect() here; these will use the sequence of
// primitives themselves in the long run.
Rectangle aSdrGeoData( _rVOC.GetSdrUnoObj().GetGeoRect() );
Point aGridOffset = _rVOC.GetSdrUnoObj().GetGridOffset();
@@ -1678,7 +1678,7 @@ namespace sdr { namespace contact {
{
// when live mode is switched on, a refresh is needed. The edit mode visualisation
// needs to be repainted and the now used VCL-Window needs to be positioned and
- // sized. Both is done from the repant refresh.
+ // sized. Both is done from the repaint refresh.
const_cast< ViewObjectContactOfUnoControl* >(this)->ActionChanged();
}
}
diff --git a/svx/source/sdr/properties/attributeproperties.cxx b/svx/source/sdr/properties/attributeproperties.cxx
index c4609c4..325558b 100644
--- a/svx/source/sdr/properties/attributeproperties.cxx
+++ b/svx/source/sdr/properties/attributeproperties.cxx
@@ -483,7 +483,7 @@ namespace sdr
SfxItemSet* pDestItemSet = new SfxItemSet(*mpItemSet);
pDestItemSet->SetParent(0L);
- // pepare forgetting the current stylesheet like in RemoveStyleSheet()
+ // prepare forgetting the current stylesheet like in RemoveStyleSheet()
EndListening(*mpStyleSheet);
EndListening(mpStyleSheet->GetPool());
diff --git a/svx/source/svdraw/svdedtv1.cxx b/svx/source/svdraw/svdedtv1.cxx
index e9979ad6..83f8a66 100644
--- a/svx/source/svdraw/svdedtv1.cxx
+++ b/svx/source/svdraw/svdedtv1.cxx
@@ -188,7 +188,7 @@ void SdrEditView::MoveMarkedObj(const Size& rSiz, bool bCopy)
OUString aStr(ImpGetResStr(STR_EditMove));
if (bCopy)
aStr += ImpGetResStr(STR_EditWithCopy);
- // meeds its own UndoGroup because of its parameters
+ // needs its own UndoGroup because of its parameters
BegUndo(aStr,GetDescriptionOfMarkedObjects(),SDRREPFUNC_OBJ_MOVE);
}
diff --git a/svx/source/svdraw/svdundo.cxx b/svx/source/svdraw/svdundo.cxx
index b2c85d2..069afe4 100644
--- a/svx/source/svdraw/svdundo.cxx
+++ b/svx/source/svdraw/svdundo.cxx
@@ -1161,7 +1161,7 @@ void SdrUndoObjSetText::Redo()
pTarget->ActionChanged();
- // #i124389# if it's a table, als oneed to relayout TextFrame
+ // #i124389# if it's a table, also need to relayout TextFrame
if(0 != dynamic_cast< sdr::table::SdrTableObj* >(pTarget))
{
pTarget->NbcAdjustTextFrameWidthAndHeight();
diff --git a/svx/source/toolbars/extrusionbar.cxx b/svx/source/toolbars/extrusionbar.cxx
index de50647..79c0fdf 100644
--- a/svx/source/toolbars/extrusionbar.cxx
+++ b/svx/source/toolbars/extrusionbar.cxx
@@ -1120,7 +1120,7 @@ void getExtrusionLightingIntensityState( SdrView* pSdrView, SfxItemSet& rSet )
}
else if( fBrightness >= 10.0 )
{
- nLevel = 1; // Noraml;
+ nLevel = 1; // Normal;
}
else
{
diff --git a/svx/source/unodraw/unoshap2.cxx b/svx/source/unodraw/unoshap2.cxx
index f01fe9e..30ff3f4 100644
--- a/svx/source/unodraw/unoshap2.cxx
+++ b/svx/source/unodraw/unoshap2.cxx
@@ -1133,7 +1133,7 @@ void SAL_CALL B2DPolyPolygonToSvxPointSequenceSequence( const basegfx::B2DPolyPo
// get single polygon
const basegfx::B2DPolygon aPoly(rPolyPoly.getB2DPolygon(a));
- // #i75974# take closed stae into account, the API polygon still uses the old closed definition
+ // #i75974# take closed state into account, the API polygon still uses the old closed definition
// with last/first point are identical (cannot hold information about open polygons with identical
// first and last point, though)
const sal_uInt32 nPointCount(aPoly.count());
diff --git a/svx/source/unodraw/unoshape.cxx b/svx/source/unodraw/unoshape.cxx
index 319678a..549c3e7 100644
--- a/svx/source/unodraw/unoshape.cxx
+++ b/svx/source/unodraw/unoshape.cxx
@@ -1442,7 +1442,7 @@ bool SAL_CALL SvxShape::SetFillAttribute( sal_Int32 nWID, const OUString& rName
bool SAL_CALL SvxShape::SetFillAttribute( sal_Int32 nWID, const OUString& rName, SfxItemSet& rSet, SdrModel* pModel )
{
// check if an item with the given name and which id is inside the models
- // pool or the stylesheet pool, if found its puttet in the itemse
+ // pool or the stylesheet pool, if found it's put in the itemset
if( !SetFillAttribute( nWID, rName, rSet ) )
{
// we did not find such item in one of the pools, so we check
@@ -2287,7 +2287,7 @@ bool SvxShape::setPropertyValueImpl( const OUString&, const SfxItemPropertySimpl
{
basegfx::B2DPolyPolygon aNewPolyPolygon;
- // #123616# be a little bit more flexible regardin gthe data type used
+ // #123616# be a little bit more flexible regarding the data type used
if( rValue.getValueType() == cppu::UnoType<drawing::PointSequenceSequence>::get())
{
// get polygpon data from PointSequenceSequence
diff --git a/svx/source/xoutdev/xtabdash.cxx b/svx/source/xoutdev/xtabdash.cxx
index 1a08f7b..0fea3a6 100644
--- a/svx/source/xoutdev/xtabdash.cxx
+++ b/svx/source/xoutdev/xtabdash.cxx
@@ -213,7 +213,7 @@ OUString XDashList::GetStringForUiNoLine() const
{
if(maStringNoLine.isEmpty())
{
- // formally was RID_SVXSTR_INVISIBLE, but tomake equal
+ // formally was RID_SVXSTR_INVISIBLE, but to make equal
// everywhere, use RID_SVXSTR_NONE
const_cast< XDashList* >(this)->maStringNoLine = ResId(RID_SVXSTR_NONE, DIALOG_MGR()).toString();
}
More information about the Libreoffice-commits
mailing list