[Libreoffice-commits] core.git: sc/qa sd/qa sfx2/qa svx/qa

4k5h1t (via logerrit) logerrit at kemper.freedesktop.org
Mon Aug 30 14:23:39 UTC 2021


 sc/qa/extras/sctablerowsobj.cxx         |    1 -
 sc/qa/unit/scshapetest.cxx              |    2 --
 sd/qa/unit/SVGExportTests.cxx           |    1 -
 sd/qa/unit/dialogs-test.cxx             |    1 -
 sfx2/qa/cppunit/test_classification.cxx |    3 ---
 svx/qa/unit/classicshapes.cxx           |    2 --
 svx/qa/unit/customshapes.cxx            |   26 --------------------------
 7 files changed, 36 deletions(-)

New commits:
commit 7970e700f86bca811508f9b229110d6ab4393d04
Author:     4k5h1t <ask160203 at gmail.com>
AuthorDate: Sun Aug 29 17:44:58 2021 +0530
Commit:     Mike Kaganski <mike.kaganski at collabora.com>
CommitDate: Mon Aug 30 16:23:05 2021 +0200

    tdf#139734 Drop redundant asserts after MacrosTest::loadFromDesktop
    
    Change-Id: I7347d2c9429647e9cd87ad8147848d24f717d181
    Reviewed-on: https://gerrit.libreoffice.org/c/core/+/121222
    Tested-by: Jenkins
    Reviewed-by: Mike Kaganski <mike.kaganski at collabora.com>

diff --git a/sc/qa/extras/sctablerowsobj.cxx b/sc/qa/extras/sctablerowsobj.cxx
index e92e500b1726..5efe6bc64cac 100644
--- a/sc/qa/extras/sctablerowsobj.cxx
+++ b/sc/qa/extras/sctablerowsobj.cxx
@@ -118,7 +118,6 @@ void ScTableRowsObj::setUp()
 {
     CalcUnoApiTest::setUp();
     m_xComponent = loadFromDesktop("private:factory/scalc");
-    CPPUNIT_ASSERT_MESSAGE("no component", m_xComponent.is());
 }
 
 void ScTableRowsObj::tearDown()
diff --git a/sc/qa/unit/scshapetest.cxx b/sc/qa/unit/scshapetest.cxx
index c178c28578a6..e14ffeb508cd 100644
--- a/sc/qa/unit/scshapetest.cxx
+++ b/sc/qa/unit/scshapetest.cxx
@@ -246,7 +246,6 @@ void ScShapeTest::testTdf140252_DragCreateFormControl()
     OUString aFileURL;
     createFileURL(u"ManualColWidthRowHeight.ods", aFileURL);
     uno::Reference<css::lang::XComponent> xComponent = loadFromDesktop(aFileURL);
-    CPPUNIT_ASSERT(xComponent.is());
 
     // Get ScTabViewShell
     ScDocShell* pDocSh = lcl_getScDocShellWithAssert(xComponent);
@@ -297,7 +296,6 @@ void ScShapeTest::testTdf134355_DragCreateCustomShape()
     OUString aFileURL;
     createFileURL(u"ManualColWidthRowHeight.ods", aFileURL);
     uno::Reference<css::lang::XComponent> xComponent = loadFromDesktop(aFileURL);
-    CPPUNIT_ASSERT(xComponent.is());
 
     // Get ScTabView
     ScDocShell* pDocSh = lcl_getScDocShellWithAssert(xComponent);
diff --git a/sd/qa/unit/SVGExportTests.cxx b/sd/qa/unit/SVGExportTests.cxx
index 966d3d18cfd7..d43815264d26 100644
--- a/sd/qa/unit/SVGExportTests.cxx
+++ b/sd/qa/unit/SVGExportTests.cxx
@@ -112,7 +112,6 @@ protected:
         if (pName)
             std::cout << pName << ",";
         mxComponent = loadFromDesktop(rURL);
-        CPPUNIT_ASSERT(mxComponent.is());
     }
 
     void save()
diff --git a/sd/qa/unit/dialogs-test.cxx b/sd/qa/unit/dialogs-test.cxx
index 16b14a7b37d8..363732c75b44 100644
--- a/sd/qa/unit/dialogs-test.cxx
+++ b/sd/qa/unit/dialogs-test.cxx
@@ -104,7 +104,6 @@ void SdDialogsTest::setUp()
 
     mpFact = SdAbstractDialogFactory::Create();
     mxComponent = loadFromDesktop("private:factory/simpress", "com.sun.star.presentation.PresentationDocument");
-    CPPUNIT_ASSERT(mxComponent.is());
 
     mpImpressDocument = dynamic_cast<SdXImpressDocument*>(mxComponent.get());
     CPPUNIT_ASSERT(mpImpressDocument);
diff --git a/sfx2/qa/cppunit/test_classification.cxx b/sfx2/qa/cppunit/test_classification.cxx
index b824ca219efe..49664aca6f2f 100644
--- a/sfx2/qa/cppunit/test_classification.cxx
+++ b/sfx2/qa/cppunit/test_classification.cxx
@@ -112,7 +112,6 @@ void ClassificationTest::testWriter()
 {
     // Test SID_CLASSIFICATION_APPLY handling in SwDocShell::Execute().
     mxComponent = loadFromDesktop("private:factory/swriter", "com.sun.star.text.TextDocument");
-    CPPUNIT_ASSERT(mxComponent.is());
     // This resulted in a beans::UnknownPropertyException when the request wasn't handled.
     testClassification();
 }
@@ -121,7 +120,6 @@ void ClassificationTest::testCalc()
 {
     // Test SID_CLASSIFICATION_APPLY handling in ScFormatShell::ExecuteStyle().
     mxComponent = loadFromDesktop("private:factory/scalc", "com.sun.star.sheet.SpreadsheetDocument");
-    CPPUNIT_ASSERT(mxComponent.is());
     // This resulted in a beans::UnknownPropertyException when the request wasn't handled.
     testClassification();
 }
@@ -130,7 +128,6 @@ void ClassificationTest::testImpress()
 {
     // Test SID_CLASSIFICATION_APPLY handling in sd::DrawViewShell::FuTemporary().
     mxComponent = loadFromDesktop("private:factory/simpress", "com.sun.star.presentation.PresentationDocument");
-    CPPUNIT_ASSERT(mxComponent.is());
     // This resulted in a beans::UnknownPropertyException when the request wasn't handled.
     testClassification();
 }
diff --git a/svx/qa/unit/classicshapes.cxx b/svx/qa/unit/classicshapes.cxx
index 7f02865c03d5..8d8ed8bd74e4 100644
--- a/svx/qa/unit/classicshapes.cxx
+++ b/svx/qa/unit/classicshapes.cxx
@@ -75,7 +75,6 @@ CPPUNIT_TEST_FIXTURE(ClassicshapesTest, testTdf98584ShearVertical)
     // not consider the additional scaling (tdf#98565).
     const OUString sURL(m_directories.getURLFromSrc(sDataDirectory) + "tdf98584_ShearVertical.odg");
     mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument");
-    CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
 
     OUString sErrors; // sErrors collects the errors and should be empty in case all is OK.
     // All tests have a small tolerance for to avoid failing because of rounding errors.
@@ -151,7 +150,6 @@ CPPUNIT_TEST_FIXTURE(ClassicshapesTest, testTdf98583ShearHorizontal)
     const OUString sURL(m_directories.getURLFromSrc(sDataDirectory)
                         + "tdf98583_ShearHorizontal.odp");
     mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.presentation.PresentationDocument");
-    CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
 
     OUString sErrors; // sErrors collects the errors and should be empty in case all is OK.
     // All tests have a small tolerance for to avoid failing because of rounding errors.
diff --git a/svx/qa/unit/customshapes.cxx b/svx/qa/unit/customshapes.cxx
index 058ad4a42abd..57ef2ade4b8e 100644
--- a/svx/qa/unit/customshapes.cxx
+++ b/svx/qa/unit/customshapes.cxx
@@ -136,7 +136,6 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf141021ExtrusionNorth)
     // Load document and get shape. It is a custom shape in 3D mode.
     OUString aURL = m_directories.getURLFromSrc(sDataDirectory) + "tdf141021_ExtrusionNorth.odp";
     mxComponent = loadFromDesktop(aURL, "com.sun.star.comp.presentation.PresentationDocument");
-    CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
     uno::Reference<drawing::XShape> xShape(getShape(0));
     SdrObjCustomShape& rSdrCustomShape(
         static_cast<SdrObjCustomShape&>(*SdrObject::getSdrObjectFromXShape(xShape)));
@@ -168,7 +167,6 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testResizeRotatedShape)
     OUString aURL
         = m_directories.getURLFromSrc(sDataDirectory) + "tdf138945_resizeRotatedShape.odg";
     mxComponent = loadFromDesktop(aURL, "com.sun.star.comp.presentation.PresentationDocument");
-    CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
     uno::Reference<drawing::XShape> xShape(getShape(0));
 
     // Change height and mirror vertical
@@ -219,7 +217,6 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testViewBoxLeftTop)
     OUString aURL
         = m_directories.getURLFromSrc(sDataDirectory) + "viewBox_positive_twolines_strict.odp";
     mxComponent = loadFromDesktop(aURL, "com.sun.star.comp.presentation.PresentationDocument");
-    CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
     // Get the shape "leftright". Error was, that the identifier "left" was always set to zero, thus
     // the path was outside the frame rectangle for a viewBox having a positive "left" value.
     uno::Reference<drawing::XShape> xShapeLR(getShape(0));
@@ -253,7 +250,6 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testAccuracyCommandX)
     OUString aURL
         = m_directories.getURLFromSrc(sDataDirectory) + "tdf121761_Accuracy_command_X.odp";
     mxComponent = loadFromDesktop(aURL, "com.sun.star.comp.presentation.PresentationDocument");
-    CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
     // Get the shape "arc_45deg_rotated". Error was, that a Bezier curve with bad parameters
     // was used, thus the segment height was obviously smaller than for a true circle.
     // Math: segment height approx 10000 * ( 1 - sqrt(0.5)) + line width
@@ -276,7 +272,6 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testToggleCommandXY)
     OUString aURL
         = m_directories.getURLFromSrc(sDataDirectory) + "tdf121952_Toggle_direction_command_X.odp";
     mxComponent = loadFromDesktop(aURL, "com.sun.star.comp.presentation.PresentationDocument");
-    CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
     // Error was, that the second segment was drawn with same direction as first one. If drawn
     // correctly, the bounding box height of the segments together is about twice the single
     // segment height. Math: segment height approx 10000 * ( 1 - sqrt(0.5)) + line width
@@ -296,7 +291,6 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testMultipleMoveTo)
     // Load a document with path "M 0 0 5 10 10 0 N"
     OUString aURL = m_directories.getURLFromSrc(sDataDirectory) + "tdf122964_MultipleMoveTo.odg";
     mxComponent = loadFromDesktop(aURL, "com.sun.star.comp.drawing.DrawingDocument");
-    CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
     // Error was, that the second and further parameter pairs were treated as moveTo,
     // and so the generated path was empty, resulting in zero width and height of the
     // bounding box. It has to be treated same as "M 0 0 L 5 10 10 0 N".
@@ -317,7 +311,6 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testWidthOrientationCommandU)
     const OUString sURL
         = m_directories.getURLFromSrc(sDataDirectory) + "tdf121845_WidthOrientation_command_U.odg";
     mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument");
-    CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
     // Error was, that the width and height of the ellipse was halved and that the ellipse
     // was not drawn clockwise but counter clockwise.
     uno::Reference<drawing::XShape> xShape(getShape(0));
@@ -341,7 +334,6 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testHalfEllipseVML)
     const OUString sURL
         = m_directories.getURLFromSrc(sDataDirectory) + "tdf121845_HalfEllipseVML.doc";
     mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.text.TextDocument");
-    CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
     // Error was, that a full circle instead of the half circle was draw.
     uno::Reference<drawing::XShape> xShape(getShape(0));
     uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY);
@@ -361,7 +353,6 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testLargeSwingAngleVML)
     const OUString sURL
         = m_directories.getURLFromSrc(sDataDirectory) + "tdf121845_start40_swing480.doc";
     mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.text.TextDocument");
-    CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
     // Error was, that only the 120 deg segment was drawn.
     uno::Reference<drawing::XShape> xShape(getShape(0));
     uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY);
@@ -380,7 +371,6 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf121845_two_commands_U)
     // thus a line from first to second segment was drawn.
     OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + "tdf121845_Two_commands_U.odg";
     mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument");
-    CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
     uno::Reference<drawing::XShape> xShape(getShape(0));
     // In case no line is drawn, two polygons are generated; with line only one polygon
     SdrObjCustomShape& rSdrObjCustomShape(
@@ -402,7 +392,6 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf124212_handle_position)
     // does not reflect the movement.
     OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + "tdf124212_handle_position.odg";
     mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument");
-    CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
     uno::Reference<drawing::XShape> xShape(getShape(0));
     // The shape has one, horizontal adjust handle.
     SdrObjCustomShape& rSdrObjCustomShape(
@@ -426,7 +415,6 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf124029_arc_position)
     // LibreOffice has used the underlying ellipse.
     OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + "tdf124029_Arc_position.doc";
     mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.text.TextDocument");
-    CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
     uno::Reference<drawing::XShape> xShape(getShape(0));
     // The visual wrong position is due to a wrong shape width.
     uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY);
@@ -445,7 +433,6 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf124740_handle_path_coordsystem)
     OUString sURL
         = m_directories.getURLFromSrc(sDataDirectory) + "tdf124740_HandleInOOXMLUserShape.pptx";
     mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument");
-    CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
     uno::Reference<drawing::XShape> xShape(getShape(0));
     // The shape has one, horizontal adjust handle. It is about 1/5 of 10cm from left
     // shape edge, shape is 6cm from left . That results in a position
@@ -471,7 +458,6 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf115813_OOXML_XY_handle)
     OUString sURL = m_directories.getURLFromSrc(sDataDirectory)
                     + "tdf115813_HandleMovementOOXMLPresetShapes.pptx";
     mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument");
-    CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
 
     OUString sErrors;
     // values in vector InteractionsHandles are in 1/100 mm and refer to page
@@ -530,7 +516,6 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testQuadraticCurveTo)
     const OUString sURL
         = m_directories.getURLFromSrc(sDataDirectory) + "tdf125782_QuadraticCurveTo.odg";
     mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument");
-    CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
     uno::Reference<drawing::XShape> xShape(getShape(0));
     uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY);
     CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is());
@@ -551,7 +536,6 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf126512_OOXML_handle_in_ODP)
     OUString sURL
         = m_directories.getURLFromSrc(sDataDirectory) + "tdf126512_OOXMLHandleMovementInODF.odp";
     mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument");
-    CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
 
     OUString sErrors; // sErrors collects shape type and handle index for failing cases
     for (sal_uInt8 i = 0; i < countShapes(); i++)
@@ -598,7 +582,6 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf127785_Mirror)
     // text frame but the frame rectangle for their text.
     OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + "tdf127785_Mirror.odp";
     mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument");
-    CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
     OUString sErrors; // sErrors collects the errors and should be empty in case all is OK.
 
     uno::Reference<drawing::XShape> xShapeV(getShape(0));
@@ -640,7 +623,6 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf126060_3D_Z_Rotation)
 
     OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + "tdf126060_3D_Z_Rotation.pptx";
     mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument");
-    CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
 
     uno::Reference<drawing::XShape> xShape(getShape(0));
     SdrObjCustomShape& rSdrObjCustomShape(
@@ -677,7 +659,6 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf127785_Asymmetric)
     OUString sURL
         = m_directories.getURLFromSrc(sDataDirectory) + "tdf127785_asymmetricTextBoxFlipV.odg";
     mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument");
-    CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
     OUString sErrors; // sErrors collects the errors and should be empty in case all is OK.
 
     uno::Reference<drawing::XShape> xShape(getShape(0));
@@ -710,7 +691,6 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf127785_TextRotateAngle)
     // flip were not made to the text box position but to the text matrix.
     OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + "tdf127785_TextRotateAngle.odp";
     mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument");
-    CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
     OUString sErrors; // sErrors collects the errors and should be empty in case all is OK.
 
     uno::Reference<drawing::XShape> xShape(getShape(0));
@@ -769,7 +749,6 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf129532_MatrixFlipV)
     // The rectangle was only shifted.
     OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + "tdf129532_MatrixFlipV.odg";
     mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument");
-    CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
     OUString sErrors; // sErrors collects the errors and should be empty in case all is OK.
 
     uno::Reference<drawing::XShape> xShape0(getShape(0));
@@ -808,7 +787,6 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf103474_commandT_CaseZeroHeight)
     OUString sURL
         = m_directories.getURLFromSrc(sDataDirectory) + "tdf103474_commandT_CaseZeroHeight.odp";
     mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.presentation.PresentationDocument");
-    CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
     uno::Reference<drawing::XShape> xShape(getShape(0));
     // The end points of the straight line segment should have the same x-coordinate of left
     // of shape, and different y-coordinates, one top and the other bottom of the shape.
@@ -839,7 +817,6 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf103474_commandG_CaseZeroHeight)
     OUString sURL
         = m_directories.getURLFromSrc(sDataDirectory) + "tdf103474_commandG_CaseZeroHeight.odp";
     mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.presentation.PresentationDocument");
-    CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
     uno::Reference<drawing::XShape> xShape(getShape(0));
     // The end points of the straight line segment should have the same x-coordinate of left
     // of shape, and different y-coordinates, one top and the other bottom of the shape.
@@ -871,7 +848,6 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf122323_largeSwingAngle)
     OUString sURL
         = m_directories.getURLFromSrc(sDataDirectory) + "tdf122323_swingAngle_larger360deg.pptx";
     mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.presentation.PresentationDocument");
-    CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
     uno::Reference<drawing::XShape> xShape(getShape(0));
     uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY);
     SdrObjCustomShape& rSdrObjCustomShape(
@@ -892,7 +868,6 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf141268)
 {
     OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + "tdf141268.odp";
     mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.presentation.PresentationDocument");
-    CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
     uno::Reference<drawing::XShape> xShape(getShape(0));
     SdrObjCustomShape& rSdrCustomShape(
         static_cast<SdrObjCustomShape&>(*SdrObject::getSdrObjectFromXShape(xShape)));
@@ -909,7 +884,6 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf136176)
     // The problem becomes visible after save and reload.
     OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + "tdf136176_rot30_flip.odg";
     mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument");
-    CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
 
     for (sal_uInt16 i = 0; i < 3; i++)
     {


More information about the Libreoffice-commits mailing list