[Libreoffice] OpenBSD bootstrap diffs

Robert Nagy robert at openbsd.org
Wed Nov 3 16:09:22 PDT 2010


Ooops the boostrap.diff and unxobsd.mk files were
wrong. Here are the correct ones.
-------------- next part --------------
diff --git a/configure.in b/configure.in
index 52d7c8f..94c1ba8 100644
--- a/configure.in
+++ b/configure.in
@@ -1556,9 +1556,21 @@ case "$build_os" in
         test_cups=no
         test_randr=no
         test_freetype=yes
-       PTHREAD_LIBS=-pthread
+        PTHREAD_LIBS=-pthread
         _os=AIX
         ;;
+    openbsd*)
+        test_x=yes
+        test_gtk=yes
+        build_cairo=yes
+        test_kde=yes
+        test_cups=yes
+        test_freetype=yes
+        test_randr=yes
+        PTHREAD_CFLAGS="-pthread -D_THREAD_SAFE"
+        PTHREAD_LIBS="-pthread"
+        _os=OpenBSD
+        ;;
    *)
    AC_MSG_ERROR([$_os operating system is not suitable to build LibreOffice!])
    ;;
@@ -3803,6 +3815,9 @@ if test "$enable_epm" = "yes"; then
     AIX)
         PKGFORMAT=rpm
         ;;
+    OpenBSD)
+        PKGFORMAT=portable
+        ;;
     *BSD)
         PKGFORMAT=bsd
         ;;
@@ -5549,7 +5564,7 @@ fi
 dnl ===================================================================
 dnl Check for system openssl
 dnl ===================================================================
-if test "$_os" = "Darwin" -o "$_os" = "NetBSD" && test "$with_system_openssl" != "no"; then
+if test "$_os" = "Darwin" -o "$_os" = "NetBSD" -o "$_os" = "OpenBSD" && test "$with_system_openssl" != "no"; then
    with_system_openssl=yes
 fi
 AC_MSG_CHECKING([which libssl to use])
@@ -5558,7 +5573,7 @@ if test -n "$with_system_openssl" -o -n "$with_system_libs" && \
     AC_MSG_RESULT([external])
     # Mac OS builds should get out without extra stuff is the Mac porters'
     # wish. And pkg-config is although Xcode ships a .pc for openssl
-    if test "$_os" = "Darwin" -o "$_os" = "NetBSD" ; then
+    if test "$_os" = "Darwin" -o "$_os" = "NetBSD" -o "$_os" = "OpenBSD" ; then
         OPENSSL_CFLAGS=
         OPENSSL_LIBS="-lssl -lcrypto"
     else
@@ -7833,7 +7848,7 @@ dnl ===================================================================
 dnl Number of CPUs to use during the build
 dnl ===================================================================
 AC_MSG_CHECKING([for number of processors to use])
-if test "z`uname -s`" = "zDarwin"; then
+if test "z`uname -s`" = "zDarwin" -o "z`uname -s`" = "zOpenBSD"; then
     BUILD_NCPUS=`sysctl -n hw.ncpu`
 else
     BUILD_NCPUS=`grep $'^processor\t*:' /proc/cpuinfo | wc -l`
diff --git a/set_soenv.in b/set_soenv.in
index d20e497..834bd34 100644
--- a/set_soenv.in
+++ b/set_soenv.in
@@ -386,6 +386,45 @@ elsif ( $platform =~ m/freebsd/ )
    }
       $INPATH         = $OUTPATH.$PROEXT;
 }
+elsif ( $platform =~ m/openbsd/ )
+{     $BIG_SVX        = "TRUE";
+      $COM            = "GCC";
+      $COMPATH        = '@COMPATH@';
+      $CVER           = "C300";
+      $GUI            = "UNX";
+      $GUIBASE        = "unx";
+      $GVER           = "VCL";
+      $OS             = "OPENBSD";
+      $PATH_SEPERATOR = $ps;
+      $OSVERSION      = '@OSVERSION@';
+      $OUTPATH        = "unxobsd";
+      $outfile        = "OpenBSDEnv.Set.sh";
+   if ($platform =~ m/^amd64/)
+   {
+      print "Setting OpenBSD AMD64 specific values... ";
+      $CPU            = "X";
+      $CPUNAME        = "X86_64";
+      $JRELIBDIR      = '$JAVA_HOME'.$ds."jre".$ds."lib".$ds."amd64";
+      $JRETOOLKITDIR  = '$JAVA_HOME'.$ds."jre".$ds."lib".$ds."amd64".$ds."server";
+      $JRETHREADDIR   = '$JAVA_HOME'.$ds."jre".$ds."lib".$ds."amd64".$ds."native_threads";
+   }
+   elsif ($platform =~ m/^i386/)
+   {  print "Setting OpenBSD x86 specific values... ";
+      $CPU            = "I";
+      $CPUNAME        = "INTEL";
+      $JRELIBDIR      = '$JAVA_HOME'.$ds."jre".$ds."lib".$ds."i386";
+      $JRETOOLKITDIR  = '$JAVA_HOME'.$ds."jre".$ds."lib".$ds."i386".$ds."client";
+      $JRETHREADDIR   = '$JAVA_HOME'.$ds."jre".$ds."lib".$ds."i386".$ds."native_threads";
+   }
+   else
+   {  print "Unsupported OpenBSD architecture: $platform \n";
+         exit 1;
+   }
+   if( @GCCVER@ >= 30401 ) {
+      $CVER        = "C341";
+   }
+      $INPATH         = $OUTPATH.$PROEXT;
+}
 elsif ( $platform =~ m/linux/ )
 {
 # General Linux settings:
@@ -1034,7 +1073,7 @@ if ($platform =~ m/solaris/)
                         $L.$USR_DT.$LIB.
                         $L.$USR_OPENWIN.$LIB;
 }
-elsif ($platform =~ m/linux|netbsd|osf1|freebsd|aix/)
+elsif ($platform =~ m/linux|netbsd|osf1|freebsd|aix|openbsd/)
 {
    $SOLAREXTRALIB     = $L.$par_dir.$LIB64;
 }
@@ -1100,7 +1139,7 @@ if ($platform =~ m/cygwin|os2/)
 }
 
 # The general environment path.
-if ($platform =~ m/linux|netbsd|odf1|freebsd|aix|solaris/)
+if ($platform =~ m/linux|netbsd|odf1|freebsd|aix|solaris|openbsd/)
 {  $PATH              = $cur_dir.
 #                        $ps.'$SOLARVER'.$ds.'$INPATH'.$BIN.
                         $ps.'$SOLARENV'.$ds.'$OUTPATH'.$BIN.
@@ -1326,7 +1365,7 @@ if ($platform =~ m/solaris/)
                         $L_STLPORT_LIB.
                         $L.$XLIB;
 }
-elsif ($platform =~ m/linux|netbsd|osf1|aix|freebsd/)
+elsif ($platform =~ m/linux|netbsd|osf1|aix|freebsd|openbsd/)
 {  $SOLARLIB          = $L.$par_dir.$LIB.
                         $L.'$SOLARENV'.$ds.'$OUTPATH'.$LIB.
                         $L.'$SOLARVER'.$ds.'$INPATH'.$LIB.
@@ -1371,10 +1410,10 @@ $SOLARINC             = $I.$cur_dir.
                         $I.'$SOLARENV'.$INC.
                         $I.'$SRC_ROOT'.$ds."res";
 
-if ($platform =~ m/solaris|linux|osf1|freebsd|netbsd|aix/)
+if ($platform =~ m/solaris|linux|osf1|freebsd|netbsd|aix|openbsd/)
 {
 $SOLARINC	     .= $STLPORT_stlport;
-if ($platform =~ m/linux|freebsd|netbsd/)
+if ($platform =~ m/linux|freebsd|netbsd|openbsd/)
 {
 # This simply adds an include path, so even cases that break the FHS work
 $SOLARINC            .= $STLPORT_inc_stlport;
@@ -1398,6 +1437,10 @@ if ($platform =~ m/linux/)
    	$SOLARINC      .= $I.'$SOLARENV'.$INC.$ds."Xp31".
                      $I.'$JAVA_HOME'.$INCLUDE;
 
+	if ($platform =~ m/openbsd/)
+	{  $SOLARINC  .= $I.$USR_LOCAL.$INCLUDE;
+	}
+
 	#include system dependent Java include directory
 	if (!($JDK eq "gcj"))
 	{
@@ -1419,13 +1462,16 @@ if ($platform =~ m/linux/)
 		elsif ( $platform =~ m/aix/ )
 		{  $SOLARINC   .=$I.'$JAVA_HOME'.$INCLUDE.$ds."aix";
 		}
+		elsif ($platform =~ m/openbsd/)
+		{  $SOLARINC   .=$I.'$JAVA_HOME'.$INCLUDE.$ds."openbsd";
+		}
 
    		#java threads include path
 
    		$SOLARINC .=$I.'$JAVA_HOME'.$INCLUDE.$ds."native_threads".$ds."include";
 	}
     #The tail, if needed
-    if ($platform =~ m/linux|freebsd|netbsd|aix/)
+    if ($platform =~ m/linux|freebsd|netbsd|aix|openbsd/)
     {  $SOLARINC  .= $I.$XINC;
     }
     elsif ($platform =~ m/osf1/)
diff --git a/solenv/inc/unitools.mk b/solenv/inc/unitools.mk
index 6bf0653..c6055d1 100644
--- a/solenv/inc/unitools.mk
+++ b/solenv/inc/unitools.mk
@@ -107,7 +107,7 @@ PERL*=perl
 TYPE=cat
 CDD=cd
 COPY=cp -f
-.IF "$(OS)"=="MACOSX" || "$(OS)"=="NETBSD"
+.IF "$(OS)"=="MACOSX" || "$(OS)"=="NETBSD" || "$(OS)"=="OPENBSD"
 COPYRECURSE=-R
 .ELSE #"$(OS)"=="MACOSX"
 COPYRECURSE=-r
diff --git a/solenv/inc/unx.mk b/solenv/inc/unx.mk
index f7364ba..7645a73 100644
--- a/solenv/inc/unx.mk
+++ b/solenv/inc/unx.mk
@@ -147,6 +147,10 @@
 .INCLUDE : unxfbsd.mk
 .ENDIF
 
+.IF "$(COM)$(OS)" == "GCCOPENBSD"
+.INCLUDE : unxobsd.mk
+.ENDIF
+
 .IF "$(COM)$(OS)$(CPU)" == "GCCMACOSXP"
 .INCLUDE : unxmacxp.mk
 .ENDIF
diff --git a/soltools/checkdll/makefile.mk b/soltools/checkdll/makefile.mk
index fc09a56..b5b386a 100644
--- a/soltools/checkdll/makefile.mk
+++ b/soltools/checkdll/makefile.mk
@@ -45,7 +45,8 @@ LIBSALCPPRT=$(0)
 APP1TARGET	= 	checkdll
 APP1OBJS	=	$(OBJ)$/checkdll.obj
 DEPOBJFILES	=	$(APP1OBJS) 
-.IF "$(OS)"!="FREEBSD" && "$(OS)"!="MACOSX" && "$(OS)"!="NETBSD"
+.IF "$(OS)"!="FREEBSD" && "$(OS)"!="MACOSX" && "$(OS)"!="NETBSD" \
+	&& "$(OS)"!="OPENBSD"
 STDLIB += -ldl
 .ENDIF
 .IF "$(OS)"=="NETBSD"
-------------- next part --------------
#*************************************************************************
#
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
# 
# Copyright 2000, 2010 Oracle and/or its affiliates.
#
# OpenOffice.org - a multi-platform office productivity suite
#
# This file is part of OpenOffice.org.
#
# OpenOffice.org is free software: you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License version 3
# only, as published by the Free Software Foundation.
#
# OpenOffice.org is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU Lesser General Public License version 3 for more details
# (a copy is included in the LICENSE file that accompanied this code).
#
# You should have received a copy of the GNU Lesser General Public License
# version 3 along with OpenOffice.org.  If not, see
# <http://www.openoffice.org/license.html>
# for a copy of the LGPLv3 License.
#
#*************************************************************************

# Makefile for OpenBSD.

ASM=
AFLAGS=

SOLAR_JAVA*=
JAVAFLAGSDEBUG=-g

# Include arch specific makefile.
.IF "$(CPUNAME)" == "INTEL"
CDEFS+=-DX86
.ENDIF
.IF "$(CPUNAME)" == "X86_64"
CDEFS+=-DX86_64
ARCH_FLAGS*=
BUILD64=1
.ENDIF

# Compiler flags for enabling optimizations
.IF "$(PRODUCT)"!=""
CFLAGSOPT=-O2					# optimizing for products
.IF "$(USE_SYSTEM_STL)"!="YES"
CFLAGSOPT+=-fno-strict-aliasing			# STLPort headers are full of aliasing warnings
.ENDIF
.ELSE   # "$(PRODUCT)"!=""
CFLAGSOPT=                                      # no optimizing for non products
.ENDIF  # "$(PRODUCT)"!=""

# filter for supressing verbose messages from linker
#not needed at the moment
#LINKOUTPUT_FILTER=" |& $(SOLARENV)/bin/msg_filter"

# _PTHREADS is needed for the stl
CDEFS+=$(PTHREAD_CFLAGS) -D_PTHREADS -D_REENTRANT -DNEW_SOLAR -D_USE_NAMESPACE=1 -DSTLPORT_VERSION=450

# enable visibility define in "sal/types.h"
.IF "$(HAVE_GCC_VISIBILITY_FEATURE)" == "TRUE"
CDEFS += -DHAVE_GCC_VISIBILITY_FEATURE
.ENDIF # "$(HAVE_GCC_VISIBILITY_FEATURE)" == "TRUE"

# this is a platform with JAVA support
.IF "$(SOLAR_JAVA)"!=""
JAVADEF=-DSOLAR_JAVA
.IF "$(debug)"==""
JAVA_RUNTIME=-ljava
.ELSE
JAVA_RUNTIME=-ljava_g
.ENDIF
.ENDIF

# name of C++ Compiler
CXX*=g++
# name of C Compiler
CC*=gcc
.IF "$(SYSBASE)"!=""
CFLAGS_SYSBASE:=-isystem $(SYSBASE)/usr/include
CXX+:=$(CFLAGS_SYSBASE)
CC+:=$(CFLAGS_SYSBASE)
.ENDIF          # "$(SYSBASE)"!=""
CFLAGS+=-fmessage-length=0 -c

# flags to enable build with symbols; required for crashdump feature
.IF "$(ENABLE_SYMBOLS)"=="SMALL"
CFLAGSENABLESYMBOLS=-g1
.ELSE
CFLAGSENABLESYMBOLS=-g # was temporarily commented out, reenabled before Beta

.ENDIF

# flags for the C++ Compiler
CFLAGSCC= -pipe $(ARCH_FLAGS)
# Flags for enabling exception handling
CFLAGSEXCEPTIONS=-fexceptions -fno-enforce-eh-specs
# Flags for disabling exception handling
CFLAGS_NO_EXCEPTIONS=-fno-exceptions -DBOOST_NO_EXCEPTIONS

# -fpermissive should be removed as soon as possible
CFLAGSCXX= -pipe $(ARCH_FLAGS)
PICSWITCH:=-fpic
.IF "$(HAVE_GCC_VISIBILITY_FEATURE)" == "TRUE"
CFLAGSCXX += -fvisibility-inlines-hidden
.ENDIF # "$(HAVE_GCC_VISIBILITY_FEATURE)" == "TRUE"

# Compiler flags for compiling static object in multi threaded environment with graphical user interface
CFLAGSOBJGUIMT=
# Compiler flags for compiling static object in multi threaded environment with character user interface
CFLAGSOBJCUIMT=
# Compiler flags for compiling shared object in multi threaded environment with graphical user interface
CFLAGSSLOGUIMT=$(PICSWITCH)
# Compiler flags for compiling shared object in multi threaded environment with character user interface
CFLAGSSLOCUIMT=$(PICSWITCH)
# Compiler flags for profiling
CFLAGSPROF=
# Compiler flags for debugging
CFLAGSDEBUG=-g
CFLAGSDBGUTIL=
# Compiler flags for disabling optimizations
CFLAGSNOOPT=-O0
# Compiler flags for describing the output path
CFLAGSOUTOBJ=-o

# -Wshadow does not work for C with nested uses of pthread_cleanup_push:
CFLAGSWARNCC=-Wall -Wextra -Wendif-labels
CFLAGSWARNCXX=$(CFLAGSWARNCC) -Wshadow -Wno-ctor-dtor-privacy \
    -Wno-non-virtual-dtor
CFLAGSWALLCC=$(CFLAGSWARNCC)
CFLAGSWALLCXX=$(CFLAGSWARNCXX)
CFLAGSWERRCC=-Werror

# Once all modules on this platform compile without warnings, set
# COMPILER_WARN_ERRORS=TRUE here instead of setting MODULES_WITH_WARNINGS (see
# settings.mk): Currently this is not tested on OpenBSD
#MODULES_WITH_WARNINGS :=

# switches for dynamic and static linking
STATIC		= -Wl,-Bstatic
DYNAMIC		= -Wl,-Bdynamic

# name of linker
LINK*=$(CXX)
LINKC*=$(CC)

# default linker flags
LINKFLAGSDEFS*=#-Wl,-z,defs
LINKFLAGSRUNPATH_URELIB=-Wl,-rpath,\''$$ORIGIN'\'
LINKFLAGSRUNPATH_UREBIN=-Wl,-rpath,\''$$ORIGIN/../lib:$$ORIGIN'\'
    #TODO: drop $ORIGIN once no URE executable is also shipped in OOo
LINKFLAGSRUNPATH_OOO=-Wl,-rpath,\''$$ORIGIN:$$ORIGIN/../ure-link/lib'\'
LINKFLAGSRUNPATH_SDK=-Wl,-rpath,\''$$ORIGIN/../../ure-link/lib'\'
LINKFLAGSRUNPATH_BRAND=-Wl,-rpath,\''$$ORIGIN:$$ORIGIN/../basis-link/program:$$ORIGIN/../basis-link/ure-link/lib'\'
LINKFLAGSRUNPATH_OXT=
LINKFLAGSRUNPATH_NONE=
LINKFLAGS=-Wl,-z,combreloc $(LINKFLAGSDEFS)

# linker flags for linking applications
LINKFLAGSAPPGUI= -Wl,-export-dynamic -Wl,--noinhibit-exec
LINKFLAGSAPPCUI= -Wl,-export-dynamic -Wl,--noinhibit-exec

# linker flags for linking shared libraries
LINKFLAGSSHLGUI= -shared
LINKFLAGSSHLCUI= -shared

LINKFLAGSTACK=
LINKFLAGSPROF=
LINKFLAGSDEBUG=-g
LINKFLAGSOPT=

# linker flags for optimization (symbol hashtable)
# for now, applied to symbol scoped libraries, only
LINKFLAGSOPTIMIZE*=-Wl,-O1
LINKVERSIONMAPFLAG=$(LINKFLAGSOPTIMIZE) -Wl,--version-script

SONAME_SWITCH=-Wl,-h

# Sequence of libs does matter !

STDLIBCPP=-lstdc++

# default objectfilenames to link
STDOBJVCL=$(L)/salmain.o
STDOBJGUI=
STDSLOGUI=
STDOBJCUI=
STDSLOCUI=

# libraries for linking applications
STDLIBGUIMT=-lX11 $(PTHREAD_LIBS) -lm
STDLIBCUIMT=$(PTHREAD_LIBS) -lm
# libraries for linking shared libraries
STDSHLGUIMT=-lX11 -lXext $(PTHREAD_LIBS) -lm
STDSHLCUIMT=$(PTHREAD_LIBS) -lm

LIBSALCPPRT*=-Wl,--whole-archive -lsalcpprt -Wl,--no-whole-archive

.IF "$(USE_STLP_DEBUG)" != ""
.IF "$(STLPORT_VER)" >= "500"
LIBSTLPORT=$(DYNAMIC) -lstlportstlg
LIBSTLPORTST=$(STATIC) -lstlportstlg $(DYNAMIC)
.ELSE
LIBSTLPORT=$(DYNAMIC) -lstlport_gcc_stldebug
LIBSTLPORTST=$(STATIC) -lstlport_gcc_stldebug $(DYNAMIC)
.ENDIF
.ELSE # "$(USE_STLP_DEBUG)" != ""
.IF "$(STLPORT_VER)" >= "500"
LIBSTLPORT=$(DYNAMIC) -lstlport
LIBSTLPORTST=$(STATIC) -lstlport $(DYNAMIC)
.ELSE
LIBSTLPORT=$(DYNAMIC) -lstlport_gcc
LIBSTLPORTST=$(STATIC) -lstlport_gcc $(DYNAMIC)
.ENDIF
.ENDIF # "$(USE_STLP_DEBUG)" != ""

#FILLUPARC=$(STATIC) -lsupc++ $(DYNAMIC)

# name of library manager
LIBMGR=ar
LIBFLAGS=-r

# tool for generating import libraries
IMPLIB=
IMPLIBFLAGS=

MAPSYM=
MAPSYMFLAGS=

RC=irc
RCFLAGS=-fo$@ $(RCFILES)
RCLINK=
RCLINKFLAGS=
RCSETVERSION=

# platform specific identifier for shared libs
DLLPRE=lib
DLLPOST=.so
DLLPOSTFIX=


More information about the LibreOffice mailing list