[PATCH] Translated a few german comments in paintfrm.cxx
Cédric Bosdonnat
cedric.bosdonnat.ooo at free.fr
Wed Jul 6 02:11:57 PDT 2011
---
sw/source/core/layout/paintfrm.cxx | 238 +++++++++++++++---------------------
1 files changed, 99 insertions(+), 139 deletions(-)
diff --git a/sw/source/core/layout/paintfrm.cxx b/sw/source/core/layout/paintfrm.cxx
index c62190a..1a69ed0 100755
--- a/sw/source/core/layout/paintfrm.cxx
+++ b/sw/source/core/layout/paintfrm.cxx
@@ -162,7 +162,7 @@ using namespace ::com::sun::star;
#define SUBCOL_FLY 0x10 //Helplines inside fly frames
#define SUBCOL_SECT 0x20 //Helplines inside sections
-//----- Klassen zum Sammeln von Umrandungen und Hilfslinien ---
+// Classes collecting the border lines and help lines
class SwLineRect : public SwRect
{
Color aColor;
@@ -204,7 +204,6 @@ public:
void PaintLines ( OutputDevice *pOut );
void LockLines( sal_Bool bLock );
- /// OD 13.08.2002 - correct type of function
sal_uInt16 Free() const { return nFree; }
};
@@ -217,14 +216,10 @@ public:
inline void Ins( const SwRect &rRect, const sal_uInt8 nSCol );
};
-//----------------- End Klassen Umrandungen ----------------------
+//----------------- End of classes for border lines ----------------------
static ViewShell *pGlobalShell = 0;
-//Wenn durchsichtige FlyInCnts im PaintBackground gepainted werden so soll der
-//Hintergrund nicht mehr retouchiert werden.
-//static sal_Bool bLockFlyBackground = sal_False;
-
//Wenn vom Fly ein Metafile abgezogen wird, so soll nur der FlyInhalt und vor
//nur hintergrund vom FlyInhalt gepaintet werden.
static sal_Bool bFlyMetafile = sal_False;
@@ -236,28 +231,27 @@ static OutputDevice *pFlyMetafileOut = 0;
static SwFlyFrm *pRetoucheFly = 0;
static SwFlyFrm *pRetoucheFly2 = 0;
-//Groesse eines Pixel und die Haelfte davon. Wird jeweils bei Eintritt in
-//SwRootFrm::Paint neu gesetzt.
+// Sizes of a pixel and the corresponding halves. Will be reset when
+// entering SwRootFrm::Paint
static long nPixelSzW = 0, nPixelSzH = 0;
static long nHalfPixelSzW = 0, nHalfPixelSzH = 0;
static long nMinDistPixelW = 0, nMinDistPixelH = 0;
-//Aktueller Zoomfaktor
+// Current zoom factor
static double aScaleX = 1.0;
static double aScaleY = 1.0;
static double aMinDistScale = 0.73;
static double aEdgeScale = 0.5;
-//In pLines werden Umrandungen waehrend des Paint gesammelt und soweit
-//moeglich zusammengefasst.
-//In pSubsLines werden Hilfslinien gesammelt und zusammengefasst. Diese
-//werden vor der Ausgabe mit pLines abgeglichen, so dass moeglichst keine
-//Umrandungen von den Hilfslinen verdeckt werden.
-//bTablines ist waerend des Paints einer Tabelle sal_True.
+// The borders will be collected in pLines during the Paint and later
+// possibly merge them.
+// The help lines will be collected and merged in pSubsLines. These will
+// be compared with pLines before the work in order to avoid help lines
+// to hide borders.
+// bTablines is sal_True during the Paint of a table.
static SwLineRects *pLines = 0;
static SwSubsRects *pSubsLines = 0;
-// OD 18.11.2002 #99672# - global variable for sub-lines of body, header, footer,
-// section and footnote frames.
+// global variable for sub-lines of body, header, footer, section and footnote frames.
static SwSubsRects *pSpecSubsLines = 0;
static SfxProgress *pProgress = 0;
@@ -270,13 +264,13 @@ static sal_Bool bTableHack = sal_False;
//Um das teure Ermitteln der RetoucheColor zu optimieren
Color aGlobalRetoucheColor;
-//Statics fuer Umrandungsalignment setzen.
-// OD 05.05.2003 #107169# - adjustment for 'small' twip-to-pixel relations:
+//Statics to set the borders alignment.
+// adjustment for 'small' twip-to-pixel relations:
// For 'small' twip-to-pixel relations (less then 2:1)
// values of <nHalfPixelSzW> and <nHalfPixelSzH> are set to ZERO.
void SwCalcPixStatics( OutputDevice *pOut )
{
- // OD 30.04.2003 #107169# - determine 'small' twip-to-pixel relation
+ // determine 'small' twip-to-pixel relation
sal_Bool bSmallTwipToPxRelW = sal_False;
sal_Bool bSmallTwipToPxRelH = sal_False;
{
@@ -300,7 +294,7 @@ void SwCalcPixStatics( OutputDevice *pOut )
if( !nPixelSzH )
nPixelSzH = 1;
- // OD 06.05.2003 #107169# - consider 'small' twip-to-pixel relations
+ // consider 'small' twip-to-pixel relations
if ( !bSmallTwipToPxRelW )
{
nHalfPixelSzW = nPixelSzW / 2 + 1;
@@ -309,7 +303,7 @@ void SwCalcPixStatics( OutputDevice *pOut )
{
nHalfPixelSzW = 0;
}
- // OD 06.05.2003 #107169# - consider 'small' twip-to-pixel relations
+ // consider 'small' twip-to-pixel relations
if ( !bSmallTwipToPxRelH )
{
nHalfPixelSzH = nPixelSzH / 2 + 1;
@@ -327,7 +321,7 @@ void SwCalcPixStatics( OutputDevice *pOut )
aScaleY = rMap.GetScaleY();
}
-//Zum Sichern der statics, damit das Paint (quasi) reentrant wird.
+// To save the statics in order for the Paint to be (almost) reentrant
class SwSavePaintStatics
{
sal_Bool bSFlyMetafile,
@@ -339,7 +333,6 @@ class SwSavePaintStatics
*pSFlyOnlyDraw;
SwLineRects *pSLines;
SwSubsRects *pSSubsLines;
- // #123196#
SwSubsRects* pSSpecSubsLines;
SfxProgress *pSProgress;
long nSPixelSzW,
@@ -365,7 +358,6 @@ SwSavePaintStatics::SwSavePaintStatics() :
pSFlyOnlyDraw ( pFlyOnlyDraw ),
pSLines ( pLines ),
pSSubsLines ( pSubsLines ),
- // #123196#
pSSpecSubsLines ( pSpecSubsLines ),
pSProgress ( pProgress ),
nSPixelSzW ( nPixelSzW ),
@@ -390,7 +382,6 @@ SwSavePaintStatics::SwSavePaintStatics() :
aEdgeScale = 0.5;
pLines = 0;
pSubsLines = 0;
- // #123196#
pSpecSubsLines = 0L;
pProgress = 0;
}
@@ -405,7 +396,6 @@ SwSavePaintStatics::~SwSavePaintStatics()
pFlyOnlyDraw = pSFlyOnlyDraw;
pLines = pSLines;
pSubsLines = pSSubsLines;
- // #123196#
pSpecSubsLines = pSSpecSubsLines;
pProgress = pSProgress;
nPixelSzW = nSPixelSzW;
@@ -419,7 +409,7 @@ SwSavePaintStatics::~SwSavePaintStatics()
aScaleY = aSScaleY;
}
-//----------------- Implementierungen fuer Tabellenumrandung --------------
+//----------------- Implementation for the table borders --------------
SV_IMPL_VARARR( SwLRects, SwLineRect );
@@ -438,13 +428,13 @@ SwLineRect::SwLineRect( const SwRect &rRect, const Color *pCol, const SvxBorderS
sal_Bool SwLineRect::MakeUnion( const SwRect &rRect )
{
- //Es wurde bereits ausserhalb geprueft, ob die Rechtecke die gleiche
- //Ausrichtung (horizontal bzw. vertikal), Farbe usw. besitzen.
- if ( Height() > Width() ) //Vertikale Linie
+ // It has already been tested outside, whether the rectangles have
+ // the same orientation (horizontal or vertical), color, etc.
+ if ( Height() > Width() ) //Vertical line
{
if ( Left() == rRect.Left() && Width() == rRect.Width() )
{
- //Zusammenfassen wenn kein Luecke zwischen den Linien ist.
+ // Merge when there is no gap between the lines
const long nAdd = nPixelSzW + nHalfPixelSzW;
if ( Bottom() + nAdd >= rRect.Top() &&
Top() - nAdd <= rRect.Bottom() )
@@ -459,7 +449,7 @@ sal_Bool SwLineRect::MakeUnion( const SwRect &rRect )
{
if ( Top() == rRect.Top() && Height() == rRect.Height() )
{
- //Zusammenfassen wenn kein Luecke zwischen den Linien ist.
+ // Merge when there is no gap between the lines
const long nAdd = nPixelSzW + nHalfPixelSzW;
if ( Right() + nAdd >= rRect.Left() &&
Left() - nAdd <= rRect.Right() )
@@ -481,7 +471,7 @@ void SwLineRects::AddLineRect( const SwRect &rRect, const Color *pCol, const Svx
for ( sal_uInt16 i = Count(); i ; )
{
SwLineRect &rLRect = operator[](--i);
- //Pruefen von Ausrichtung, Farbe, Tabelle.
+ // Test for the direction, color, table
if ( rLRect.GetTab() == pTab &&
!rLRect.IsPainted() && rLRect.GetSubColor() == nSCol &&
(rLRect.Height() > rLRect.Width()) == (rRect.Height() > rRect.Width()) &&
@@ -499,7 +489,7 @@ void SwLineRects::ConnectEdges( OutputDevice *pOut )
{
if ( pOut->GetOutDevType() != OUTDEV_PRINTER )
{
- //Fuer einen zu kleinen Zoom arbeite ich nicht.
+ // I'm not doing anything for a too small zoom
if ( aScaleX < aEdgeScale || aScaleY < aEdgeScale )
return;
}
@@ -530,7 +520,7 @@ void SwLineRects::ConnectEdges( OutputDevice *pOut )
nL1c = rL1.Bottom(); nL1d = rL1.Right();
}
- //Alle moeglicherweise mit i1 zu verbindenden Linien einsammeln.
+ // Collect all lines to possibly link with i1
for ( sal_uInt16 i2 = 0; i2 < Count(); ++i2 )
{
SwLineRect &rL2 = operator[](i2);
@@ -566,7 +556,7 @@ void SwLineRects::ConnectEdges( OutputDevice *pOut )
sal_Bool bRemove = sal_False;
- //Fuer jede Linie jede alle folgenden checken.
+ // For each line test all following ones.
for ( sal_uInt16 k = 0; !bRemove && k < aCheck.Count(); ++k )
{
SwLineRect &rR1 = (SwLineRect&)*(SwLineRect*)aCheck[k];
@@ -586,13 +576,13 @@ void SwLineRects::ConnectEdges( OutputDevice *pOut )
{
pLA = &rR2; pLB = &rR1;
}
- //beschreiben k1 und k2 eine Doppellinie?
+ // are k1 and k2 describing a double line?
if ( pLA && pLA->Bottom() + 60 > pLB->Top() )
{
if ( rL1.Top() < pLA->Top() )
{
if ( rL1.Bottom() == pLA->Bottom() )
- continue; //kleiner Irrtum (woher?)
+ continue; //Small error (where?)
SwRect aIns( rL1 );
aIns.Bottom( pLA->Bottom() );
@@ -610,9 +600,9 @@ void SwLineRects::ConnectEdges( OutputDevice *pOut )
}
if ( rL1.Bottom() > pLB->Bottom() )
- rL1.Top( pLB->Top() ); //i1 nach oben verlaengern
+ rL1.Top( pLB->Top() ); // extend i1 on the top
else
- bRemove = sal_True; //abbrechen, i1 entfernen
+ bRemove = sal_True; //stopping, remove i1
}
}
else
@@ -627,13 +617,13 @@ void SwLineRects::ConnectEdges( OutputDevice *pOut )
{
pLA = &rR2; pLB = &rR1;
}
- //Liegt eine 'doppellinie' vor?
+ // Is is double line?
if ( pLA && pLA->Right() + 60 > pLB->Left() )
{
if ( rL1.Left() < pLA->Left() )
{
if ( rL1.Right() == pLA->Right() )
- continue; //kleiner irrtum
+ continue; //small error
SwRect aIns( rL1 );
aIns.Right( pLA->Right() );
@@ -660,31 +650,29 @@ void SwLineRects::ConnectEdges( OutputDevice *pOut )
if ( bRemove )
{
Remove( static_cast<sal_uInt16>(i), 1 );
- --i; //keinen auslassen!
+ --i; //Leave none!
}
}
}
inline void SwSubsRects::Ins( const SwRect &rRect, const sal_uInt8 nSCol )
{
- //Linien die kuerzer als die breiteste Linienbreite sind werden
- //nicht aufgenommen.
+ // Lines that are shorted than the largest line width won't be inserted
if ( rRect.Height() > DEF_LINE_WIDTH_4 || rRect.Width() > DEF_LINE_WIDTH_4 )
Insert( SwLineRect( rRect, 0, SOLID, 0, nSCol ), Count());
}
void SwSubsRects::RemoveSuperfluousSubsidiaryLines( const SwLineRects &rRects )
{
- //Alle Hilfslinien, die sich mit irgendwelchen Umrandungen decken werden
- //entfernt bzw. zerstueckelt..
+ // All help lines that are covered by any border will be removed or split
for ( sal_uInt16 i = 0; i < Count(); ++i )
{
- // OD 18.11.2002 #99672# - get a copy instead of a reference, because
- // an <insert> may destroy the object due to a necessary array resize.
+ // get a copy instead of a reference, because an <insert> may destroy
+ // the object due to a necessary array resize.
const SwLineRect aSubsLineRect = SwLineRect( operator[](i) );
- // OD 19.12.2002 #106318# - add condition <aSubsLineRect.IsLocked()>
- // in order to consider only border lines, which are *not* locked.
+ // add condition <aSubsLineRect.IsLocked()> in order to consider only
+ // border lines, which are *not* locked.
if ( aSubsLineRect.IsPainted() ||
aSubsLineRect.IsLocked() )
continue;
@@ -705,9 +693,8 @@ void SwSubsRects::RemoveSuperfluousSubsidiaryLines( const SwLineRects &rRects )
{
SwLineRect &rLine = rRects[k];
- // OD 20.12.2002 #106318# - do *not* consider painted or locked
- // border lines.
- // OD 20.01.2003 #i1837# - locked border lines have to be considered.
+ // do *not* consider painted or locked border lines.
+ // #i1837# - locked border lines have to be considered.
if ( rLine.IsLocked () )
continue;
@@ -819,15 +806,13 @@ void lcl_DrawDashedRect( OutputDevice * pOut, SwLineRect & rLRect )
void SwLineRects::PaintLines( OutputDevice *pOut )
{
- //Painten der Umrandungen. Leider muessen wir zweimal durch.
- //Einmal fuer die innenliegenden und einmal fuer die Aussenkanten
- //der Tabellen.
+ // Paint the borders. Sadly two passes are needed.
+ // Once for the inside and once for the outside edges of tables
if ( Count() != nLastCount )
{
// #i16816# tagged pdf support
SwTaggedPDFHelper aTaggedPDFHelper( 0, 0, 0, *pOut );
- // OD 2004-04-23 #116347#
pOut->Push( PUSH_FILLCOLOR|PUSH_LINECOLOR );
pOut->SetFillColor();
pOut->SetLineColor();
@@ -851,13 +836,13 @@ void SwLineRects::PaintLines( OutputDevice *pOut )
continue;
}
- //Jetzt malen oder erst in der zweiten Runde?
+ // Paint it now or in the second pass?
sal_Bool bPaint = sal_True;
if ( rLRect.GetTab() )
{
if ( rLRect.Height() > rLRect.Width() )
{
- //Senkrechte Kante, ueberlappt sie mit der TabellenKante?
+ // Vertical edge, overlapping with the table edge?
SwTwips nLLeft = rLRect.Left() - 30,
nLRight = rLRect.Right() + 30,
nTLeft = rLRect.GetTab()->Frm().Left() + rLRect.GetTab()->Prt().Left(),
@@ -867,7 +852,8 @@ void SwLineRects::PaintLines( OutputDevice *pOut )
bPaint = sal_False;
}
else
- { //Waagerechte Kante, ueberlappt sie mit der Tabellenkante?
+ {
+ // Horizontal edge, overlapping with the table edge?
SwTwips nLTop = rLRect.Top() - 30,
nLBottom = rLRect.Bottom() + 30,
nTTop = rLRect.GetTab()->Frm().Top() + rLRect.GetTab()->Prt().Top(),
@@ -944,7 +930,7 @@ void SwSubsRects::PaintSubsidiary( OutputDevice *pOut,
// #i16816# tagged pdf support
SwTaggedPDFHelper aTaggedPDFHelper( 0, 0, 0, *pOut );
- //Alle Hilfslinien, die sich fast decken entfernen (Tabellen)
+ // Remove all help line that are almost covered (tables)
for ( sal_uInt16 i = 0; i < Count(); ++i )
{
SwLineRect &rLi = operator[](i);
@@ -966,8 +952,8 @@ void SwSubsRects::PaintSubsidiary( OutputDevice *pOut,
(nLk < rLi.Left() && nLk+21 > rLi.Left())))
{
Remove( k, 1 );
- //Nicht mit der inneren Schleife weiter, weil
- //das Array schrumpfen koennte!
+ // don't continue with inner loop any more:
+ // the array may have shrunk!
--i; k = Count();
}
}
@@ -993,13 +979,11 @@ void SwSubsRects::PaintSubsidiary( OutputDevice *pOut,
if ( Count() )
{
- // OD 2004-04-23 #116347#
pOut->Push( PUSH_FILLCOLOR|PUSH_LINECOLOR );
pOut->SetLineColor();
- // OD 14.01.2003 #106660# - reset draw mode in high contrast
- // mode in order to get fill color set at output device.
- // Recover draw mode after draw of lines.
+ // Reset draw mode in high contrast mode in order to get fill color
+ // set at output device. Recover draw mode after draw of lines.
// Necessary for the subsidiary lines painted by the fly frames.
sal_uLong nOldDrawMode = pOut->GetDrawMode();
if( pGlobalShell->GetWin() &&
@@ -1011,8 +995,7 @@ void SwSubsRects::PaintSubsidiary( OutputDevice *pOut,
for ( sal_uInt16 i = 0; i < Count(); ++i )
{
SwLineRect &rLRect = operator[](i);
- // OD 19.12.2002 #106318# - add condition <!rLRect.IsLocked()>
- // to prevent paint of locked subsidiary lines.
+ // Add condition <!rLRect.IsLocked()> to prevent paint of locked subsidiary lines.
if ( !rLRect.IsPainted() &&
!rLRect.IsLocked() )
{
@@ -1034,7 +1017,6 @@ void SwSubsRects::PaintSubsidiary( OutputDevice *pOut,
}
}
- // OD 14.01.2003 #106660# - recovering draw mode
pOut->SetDrawMode( nOldDrawMode );
pOut->Pop();
@@ -1045,8 +1027,8 @@ void SwSubsRects::PaintSubsidiary( OutputDevice *pOut,
//-------------------------------------------------------------------------
//Diverse Functions die in diesem File so verwendet werden.
-// OD 20.02.2003 - Note: function <SwAlignRect(..)> also used outside this file.
-// OD 29.04.2003 #107169# - correction: adjust rectangle on pixel level in order
+// Note: function <SwAlignRect(..)> also used outside this file.
+// Correction: adjust rectangle on pixel level in order
// to assure, that the border 'leaves its original pixel', if it has to.
// No prior adjustments for odd relation between pixel and twip.
void MA_FASTCALL SwAlignRect( SwRect &rRect, const ViewShell *pSh )
@@ -1054,7 +1036,6 @@ void MA_FASTCALL SwAlignRect( SwRect &rRect, const ViewShell *pSh )
if( !rRect.HasArea() )
return;
- // OD 03.09.2002 #102450#
// Assure that view shell (parameter <pSh>) exists, if the output device
// is taken from this view shell --> no output device, no alignment.
// Output device taken from view shell <pSh>, if <bFlyMetafile> not set.
@@ -1066,12 +1047,12 @@ void MA_FASTCALL SwAlignRect( SwRect &rRect, const ViewShell *pSh )
const OutputDevice *pOut = bFlyMetafile ?
pFlyMetafileOut : pSh->GetOut();
- // OD 28.04.2003 #107169# - hold original rectangle in pixel
+ // Hold original rectangle in pixel
const Rectangle aOrgPxRect = pOut->LogicToPixel( rRect.SVRect() );
- // OD 29.04.2003 #107169# - determine pixel-center rectangle in twip
+ // Determine pixel-center rectangle in twip
const SwRect aPxCenterRect( pOut->PixelToLogic( aOrgPxRect ) );
- // OD 06.05.2003 #107169# - perform adjustments on pixel level.
+ // Perform adjustments on pixel level.
SwRect aAlignedPxRect( aOrgPxRect );
if ( rRect.Top() > aPxCenterRect.Top() )
{
@@ -1097,8 +1078,7 @@ void MA_FASTCALL SwAlignRect( SwRect &rRect, const ViewShell *pSh )
aAlignedPxRect.Right( aAlignedPxRect.Right() - 1 );
}
- // OD 11.10.2002 #103636# - consider negative width/height
- // check, if aligned SwRect has negative width/height.
+ // Consider negative width/height check, if aligned SwRect has negative width/height.
// If Yes, adjust it to width/height = 0 twip.
// NOTE: A SwRect with negative width/height can occur, if the width/height
// of the given SwRect in twip was less than a pixel in twip and that
@@ -1112,10 +1092,9 @@ void MA_FASTCALL SwAlignRect( SwRect &rRect, const ViewShell *pSh )
{
aAlignedPxRect.Height(0);
}
- // OD 30.04.2003 #107169# - consider zero width/height
- // For converting a rectangle from pixel to logic it needs a width/height.
- // Thus, set width/height to one, if it's zero and correct this on the twip
- // level after the conversion.
+ // Consider zero width/height for converting a rectangle from
+ // pixel to logic it needs a width/height. Thus, set width/height
+ // to one, if it's zero and correct this on the twip level after the conversion.
sal_Bool bZeroWidth = sal_False;
if ( aAlignedPxRect.Width() == 0 )
{
@@ -1131,10 +1110,8 @@ void MA_FASTCALL SwAlignRect( SwRect &rRect, const ViewShell *pSh )
rRect = pOut->PixelToLogic( aAlignedPxRect.SVRect() );
- // OD 30.04.2003 #107169# - consider zero width/height and adjust calculated
- // aligned twip rectangle.
- // OD 19.05.2003 #109667# - reset width/height to zero; previous negative
- // width/height haven't to be considered.
+ // Consider zero width/height and adjust calculated aligned twip rectangle.
+ // Reset width/height to zero; previous negative width/height haven't to be considered.
if ( bZeroWidth )
{
rRect.Width(0);
@@ -1145,7 +1122,7 @@ void MA_FASTCALL SwAlignRect( SwRect &rRect, const ViewShell *pSh )
}
}
-/** OD 19.05.2003 #109667# - helper method for twip adjustments on pixel base
+/** Helper method for twip adjustments on pixel base
method compares the x- or y-pixel position of two twip-point. If the x-/y-pixel
positions are the same, the x-/y-pixel position of the second twip point is
@@ -1182,7 +1159,7 @@ void lcl_CompPxPosAndAdjustPos( const OutputDevice& _rOut,
}
}
-/** OD 25.09.2002 #99739# - method to pixel-align rectangle for drawing graphic object
+/** Method to pixel-align rectangle for drawing graphic object
Because for drawing a graphic left-top-corner and size coordinations are
used, these coordinations have to be determined on pixel level.
@@ -1246,7 +1223,7 @@ void MA_FASTCALL lcl_CalcBorderRect( SwRect &rRect, const SwFrm *pFrm,
const SwBorderAttrs &rAttrs,
const sal_Bool bShadow )
{
- // OD 23.01.2003 #106386# - special handling for cell frames.
+ // Special handling for cell frames.
// The printing area of a cell frame is completely enclosed in the frame area
// and a cell frame has no shadow. Thus, for cell frames the calculated
// area equals the frame area.
@@ -1278,8 +1255,7 @@ void MA_FASTCALL lcl_CalcBorderRect( SwRect &rRect, const SwFrm *pFrm,
SwTwips nDiff = rBox.GetTop() ?
rBox.CalcLineSpace( BOX_LINE_TOP ) :
( rAttrs.IsBorderDist() ?
- // OD 23.01.2003 #106386# - increase of distance by
- // one twip is incorrect.
+ // Increase of distance by one twip is incorrect.
rBox.GetDistance( BOX_LINE_TOP ) : 0 );
if( nDiff )
(rRect.*fnRect->fnSubTop)( nDiff );
@@ -1297,14 +1273,12 @@ void MA_FASTCALL lcl_CalcBorderRect( SwRect &rRect, const SwFrm *pFrm,
// the height of the last line
nDiff = ((SwTabFrm*)pFrm)->GetBottomLineSize();
}
- // <-- collapsing
else
{
nDiff = rBox.GetBottom() ?
rBox.CalcLineSpace( BOX_LINE_BOTTOM ) :
( rAttrs.IsBorderDist() ?
- // OD 23.01.2003 #106386# - increase of distance by
- // one twip is incorrect.
+ // Increase of distance by one twip is incorrect.
rBox.GetDistance( BOX_LINE_BOTTOM ) : 0 );
}
if( nDiff )
@@ -1314,13 +1288,13 @@ void MA_FASTCALL lcl_CalcBorderRect( SwRect &rRect, const SwFrm *pFrm,
if ( rBox.GetLeft() )
(rRect.*fnRect->fnSubLeft)( rBox.CalcLineSpace( BOX_LINE_LEFT ) );
else if ( rAttrs.IsBorderDist() )
- // OD 23.01.2003 #106386# - increase of distance by one twip is incorrect.
+ // Increase of distance by one twip is incorrect.
(rRect.*fnRect->fnSubLeft)( rBox.GetDistance( BOX_LINE_LEFT ) );
if ( rBox.GetRight() )
(rRect.*fnRect->fnAddRight)( rBox.CalcLineSpace( BOX_LINE_RIGHT ) );
else if ( rAttrs.IsBorderDist() )
- // OD 23.01.2003 #106386# - increase of distance by one twip is incorrect.
+ // Increase of distance by one twip is incorrect.
(rRect.*fnRect->fnAddRight)( rBox.GetDistance( BOX_LINE_RIGHT ) );
if ( bShadow && rAttrs.GetShadow().GetLocation() != SVX_SHADOW_NONE )
@@ -1345,9 +1319,8 @@ void MA_FASTCALL lcl_ExtendLeftAndRight( SwRect& _rRect,
const SwBorderAttrs& _rAttrs,
const SwRectFn& _rRectFn )
{
- // OD 21.05.2003 #108789# - extend left/right border/shadow rectangle to
- // bottom of previous frame/to top of next frame, if border/shadow is joined
- // with previous/next frame.
+ // Extend left/right border/shadow rectangle to bottom of previous frame/to
+ // top of next frame, if border/shadow is joined with previous/next frame.
if ( _rAttrs.JoinedWithPrev( _rFrm ) )
{
const SwFrm* pPrevFrm = _rFrm.GetPrev();
@@ -1373,7 +1346,7 @@ void MA_FASTCALL lcl_SubtractFlys( const SwFrm *pFrm, const SwPageFrm *pPage,
const SwAnchoredObject* pAnchoredObj = rObjs[j];
const SdrObject* pSdrObj = pAnchoredObj->GetDrawObj();
- // OD 2004-01-15 #110582# - do not consider invisible objects
+ // Do not consider invisible objects
if ( !pPage->GetFmt()->GetDoc()->IsVisibleLayerId( pSdrObj->GetLayer() ) )
continue;
@@ -1395,12 +1368,12 @@ void MA_FASTCALL lcl_SubtractFlys( const SwFrm *pFrm, const SwPageFrm *pPage,
//Bei zeichengebundenem Fly nur diejenigen betrachten, in denen er
//nicht selbst verankert ist.
- //#33429# Warum nur bei zeichengebundenen? Es macht doch nie Sinn
+ //Warum nur bei zeichengebundenen? Es macht doch nie Sinn
//Rahmen abzuziehen in denen er selbst verankert ist oder?
if ( pSelfFly && pSelfFly->IsLowerOf( pFly ) )
continue;
- //#57194# Und warum gilt das nicht analog fuer den RetoucheFly?
+ //Und warum gilt das nicht analog fuer den RetoucheFly?
if ( pRetoucheFly && pRetoucheFly->IsLowerOf( pFly ) )
continue;
@@ -1454,11 +1427,11 @@ void MA_FASTCALL lcl_SubtractFlys( const SwFrm *pFrm, const SwPageFrm *pPage,
}
//Wenn der Inhalt des Fly Transparent ist, wird er nicht abgezogen, es sei denn
- //er steht im Hell-Layer (#31941#)
+ //er steht im Hell-Layer
const IDocumentDrawModelAccess* pIDDMA = pFly->GetFmt()->getIDocumentDrawModelAccess();
sal_Bool bHell = pSdrObj->GetLayer() == pIDDMA->GetHellId();
if ( (bStopOnHell && bHell) ||
- /// OD 05.08.2002 - change internal order of condition
+ /// Change internal order of condition
/// first check "!bHell", then "..->Lower()" and "..->IsNoTxtFrm()"
/// have not to be performed, if frame is in "Hell"
( !bHell && pFly->Lower() && pFly->Lower()->IsNoTxtFrm() &&
@@ -1470,9 +1443,8 @@ void MA_FASTCALL lcl_SubtractFlys( const SwFrm *pFrm, const SwPageFrm *pPage,
)
continue;
- // OD 08.10.2002 #103898#
// Own if-statements for transparent background/shadow of fly frames
- // (#99657#) in order to handle special conditions.
+ // in order to handle special conditions.
if ( pFly->IsBackgroundTransparent() )
{
// Background <pFly> is transparent drawn. Thus normally, its region
@@ -1533,7 +1505,6 @@ void MA_FASTCALL lcl_SubtractFlys( const SwFrm *pFrm, const SwPageFrm *pPage,
/** lcl_DrawGraphicBackgrd - local help method to draw a background for a graphic
- OD 17.10.2002 #103876#
Under certain circumstances we have to draw a background for a graphic.
This method takes care of the conditions and draws the background with the
corresponding color.
@@ -1634,30 +1605,29 @@ inline void lcl_DrawGraphicBackgrd( const SvxBrushItem& _rBackgrdBrush,
}
}
-/// OD 06.08.2002 #99657# - Note: the transparency of the background graphic
+/// Note: the transparency of the background graphic
/// is saved in SvxBrushItem.GetGraphicObject(<shell>).GetAttr().Set/GetTransparency()
/// and is considered in the drawing of the graphic.
/// Thus, to provide transparent background graphic for text frames nothing
/// has to be coded.
-/// OD 25.09.2002 #99739# - use align rectangle for drawing graphic
-/// OD 25.09.2002 #99739# - pixel-align coordinations for drawing graphic.
-/// OD 17.10.2002 #103876# - outsource code for drawing background of the graphic
+/// Use align rectangle for drawing graphic
+/// Pixel-align coordinations for drawing graphic.
+/// Outsource code for drawing background of the graphic
/// with a background color in method <lcl_DrawGraphicBackgrd>
/// Also, change type of <bGrfNum> and <bClip> from <sal_Bool> to <bool>.
void lcl_DrawGraphic( const SvxBrushItem& rBrush, OutputDevice *pOut,
ViewShell &rSh, const SwRect &rGrf, const SwRect &rOut,
bool bClip, bool bGrfNum,
bool bBackgrdAlreadyDrawn = false )
- /// OD 02.09.2002 #99657#
/// add parameter <bBackgrdAlreadyDrawn> to indicate
/// that the background is already drawn.
{
- /// OD 25.09.2002 #99739# - calculate align rectangle from parameter <rGrf>
- /// and use aligned rectangle <aAlignedGrfRect> in the following code
+ /// Calculate align rectangle from parameter <rGrf> and use aligned
+ /// rectangle <aAlignedGrfRect> in the following code
SwRect aAlignedGrfRect = rGrf;
::SwAlignRect( aAlignedGrfRect, &rSh );
- /// OD 17.10.2002 #103876# - change type from <sal_Bool> to <bool>.
+ /// Change type from <sal_Bool> to <bool>.
const bool bNotInside = bClip && !rOut.IsInside( aAlignedGrfRect );
if ( bNotInside )
{
@@ -1669,10 +1639,9 @@ void lcl_DrawGraphic( const SvxBrushItem& rBrush, OutputDevice *pOut,
((SvxBrushItem&)rBrush).SetDoneLink( Link() );
GraphicObject *pGrf = (GraphicObject*)rBrush.GetGraphicObject();
- /// OD 17.10.2002 #103876# - outsourcing drawing of background with a background color.
+ /// Outsourcing drawing of background with a background color.
::lcl_DrawGraphicBackgrd( rBrush, pOut, aAlignedGrfRect, *pGrf, bGrfNum, bBackgrdAlreadyDrawn );
- /// OD 25.09.2002 #99739# -
/// Because for drawing a graphic left-top-corner and size coordinations are
/// used, these coordinations have to be determined on pixel level.
::SwAlignGrfRect( &aAlignedGrfRect, *pOut );
@@ -1688,11 +1657,10 @@ void MA_FASTCALL DrawGraphic( const SvxBrushItem *pBrush,
const SwRect &rOut,
const sal_uInt8 nGrfNum,
const sal_Bool bConsiderBackgroundTransparency )
- /// OD 05.08.2002 #99657# - add 6th parameter to indicate that method should
+ /// Add 6th parameter to indicate that method should
/// consider background transparency, saved in the color of the brush item
{
ViewShell &rSh = *pGlobalShell;
- /// OD 17.10.2002 #103876# - change type from <sal_Bool> to <bool>
bool bReplaceGrfNum = GRFNUM_REPLACE == nGrfNum;
bool bGrfNum = GRFNUM_NO != nGrfNum;
Size aGrfSize;
@@ -1701,7 +1669,7 @@ void MA_FASTCALL DrawGraphic( const SvxBrushItem *pBrush,
{
if( rSh.GetViewOptions()->IsGraphic() )
{
- //#125488#: load graphic directly in PDF import
+ // load graphic directly in PDF import
// #i68953# - also during print load graphic directly.
if ( (rSh).GetViewOptions()->IsPDFExport() ||
rSh.GetOut()->GetOutDevType() == OUTDEV_PRINTER )
@@ -1778,7 +1746,6 @@ void MA_FASTCALL DrawGraphic( const SvxBrushItem *pBrush,
case GPOS_AREA:
aGrf = rOrg;
- /// OD 05.09.2002 #102912#
/// In spite the fact that the background graphic have to fill the complete
/// area, it has been checked, if the graphic will completely fill out
/// the region to be painted <rOut> and thus, nothing has to be retouched.
@@ -1790,14 +1757,13 @@ void MA_FASTCALL DrawGraphic( const SvxBrushItem *pBrush,
case GPOS_TILED:
{
- // OD 17.10.2002 #103876# - draw background of tiled graphic
- // before drawing tiled graphic in loop
+ // draw background of tiled graphic before drawing tiled graphic in loop
// determine graphic object
GraphicObject* pGraphicObj = const_cast< GraphicObject* >(pBrush->GetGraphicObject());
// calculate aligned paint rectangle
SwRect aAlignedPaintRect = rOut;
::SwAlignRect( aAlignedPaintRect, &rSh );
- // OD 25.10.2002 #103876# - draw background color for aligned paint rectangle
+ // draw background color for aligned paint rectangle
lcl_DrawGraphicBackgrd( *pBrush, pOutDev, aAlignedPaintRect, *pGraphicObj, bGrfNum );
// set left-top-corner of background graphic to left-top-corner of the
@@ -1806,13 +1772,12 @@ void MA_FASTCALL DrawGraphic( const SvxBrushItem *pBrush,
// setup clipping at output device
pOutDev->Push( PUSH_CLIPREGION );
pOutDev->IntersectClipRegion( rOut.SVRect() );
- // OD 28.10.2002 #103876# - use new method <GraphicObject::DrawTiled(::)>
+ // use new method <GraphicObject::DrawTiled(::)>
{
// calculate paint offset
Point aPaintOffset( aAlignedPaintRect.Pos() - aGrf.Pos() );
// draw background graphic tiled for aligned paint rectangle
- // #i42643# - apply fix #104004# for Calc
- // also for Writer - see /sc/source/view/printfun.cxx
+ // #i42643#
// For PDF export, every draw operation for bitmaps takes a
// noticeable amount of place (~50 characters). Thus, optimize
// between tile bitmap size and number of drawing operations here.
@@ -1858,17 +1823,14 @@ void MA_FASTCALL DrawGraphic( const SvxBrushItem *pBrush,
default: OSL_ENSURE( !pOutDev, "new Graphic position?" );
}
- /// OD 02.09.2002 #99657#
/// init variable <bGrfBackgrdAlreadDrawn> to indicate, if background of
/// graphic is already drawn or not.
bool bGrfBackgrdAlreadyDrawn = false;
if ( bRetouche )
{
- // OD 2004-04-23 #116347#
pOutDev->Push( PUSH_FILLCOLOR|PUSH_LINECOLOR );
pOutDev->SetLineColor();
- // OD 07.08.2002 #99657# #GetTransChg#
// check, if a existing background graphic (not filling the complete
// background) is transparent drawn and the background color is
// "no fill" respectively "auto fill", if background transparency
@@ -1900,16 +1862,15 @@ void MA_FASTCALL DrawGraphic( const SvxBrushItem *pBrush,
}
}
- /// OD 06.08.2002 #99657# #GetTransChg# - to get color of brush,
- /// check background color against COL_TRANSPARENT ("no fill"/"auto fill")
- /// instead of checking, if transparency is not set.
+ /// to get color of brush, check background color against COL_TRANSPARENT ("no fill"/"auto fill")
+ /// instead of checking, if transparency is not set.
const Color aColor( pBrush &&
( !(pBrush->GetColor() == COL_TRANSPARENT) ||
bFlyMetafile )
? pBrush->GetColor()
: aGlobalRetoucheColor );
- /// OD 08.08.2002 #99657# - determine, if background region have to be
+ /// determine, if background region have to be
/// drawn transparent.
/// background region has to be drawn transparent, if
/// background transparency have to be considered
@@ -1921,8 +1882,7 @@ void MA_FASTCALL DrawGraphic( const SvxBrushItem *pBrush,
( ( aColor.GetTransparency() != 0) ||
bTransparentGrfWithNoFillBackgrd );
- // #i75614#
- // reset draw mode in high contrast mode in order to get fill color set
+ // #i75614# reset draw mode in high contrast mode in order to get fill color set
const sal_uLong nOldDrawMode = pOutDev->GetDrawMode();
if ( pGlobalShell->GetWin() &&
Application::GetSettings().GetStyleSettings().GetHighContrastMode() )
--
1.7.3.4
--=-RdjsUVXnjyywouEhxz/w--
More information about the LibreOffice
mailing list