Crash during Traditional Chinese <-> Simplified Chinese conversion

[Cedric Bosdonnat]

On Mon, 2013-02-04 at 12:27 +0100, Michael Stahl wrote:
> On 03/02/13 10:54, Cedric Bosdonnat wrote:
> > Hi Matteo,
> > 
> > On Fri, 2013-01-04 at 14:58 +0100, Matteo Casalin wrote:
> >> Obviously, this would not work since we will get the same issue on the 
> >> second loop. Instead we can push PaM information (on which to 
> >> SetFontAndLanguage) in a queue and then iterate on it after the main 
> >> loop is completed. I'll start working on a patch and see what happens 
> >> with the Chinese document I have available. If that works, I'll submit 
> >> the patch to gerrit, hoping that someone could also apply broader tests 
> >> on the results (I don't have any knowledge of Chinese).
> > 
> > I can help you test if you need, my limited knowledge of chinese may be
> > OK to check the conversions ;)
> 
> the change was committed a month ago so there is nothing stopping you
> from testing this:  a0477d991661de605aec4fec87ca52e32ec8f743

I tested on a big list of chinese characters to convert and found no
problem. And the patch looks safe, so nothing worse than before IMHO.
--
Cedric