[BUILD] When running LO: cannot open shared object file: No such file or directory

Christian Ohrfandl christian.ohrfandl at gmail.com
Wed Dec 22 16:04:25 UTC 2021


Hey there,

so I installed a new computer with Fedora 35 x64 and set up the
libreoffice build setup as follows:

    compiled GTK4 from source and installed (checked with pkg-config)
    compiled libadwaita from source and installed (checked with pkg-config)
    checked out LO core and built from source as usual; no problems so far

However, I then started to get the warnings as shown down below in the
log. Most of them may be ignored (because they happen on Master aswell),
however, the following do matter, because LO starts in x11 mode and does
not show correct theming et cetera:

warn:sal.osl:180140:180140:sal/osl/unx/module.cxx:152:
dlopen(/home/christian/repos/libreoffice/instdir/program/libvclplug_gtk4lo.so,
257): libadwaita-1.so.0: cannot open shared object file: No such file or
directory
warn:vcl.plugadapt:180140:180140:vcl/source/app/salplug.cxx:128: could
not load shared object libvclplug_gtk4lo.so
warn:sal.osl:180140:180140:sal/osl/unx/module.cxx:152:
dlopen(/home/christian/repos/libreoffice/instdir/program/libvclplug_gtk3lo.so,
257): libadwaita-1.so.0: cannot open shared object file: No such file or
directory

So I guess what this basically means is that libadwaita-1.so-0 can not
be found; and maybe addtionally that libvclplug_gtk4lo.so can not be
loaded (as a consequence?)? The weired thing about that is that I just
copied the LO source folder I used on my Ubuntu 21.10 machine (it works
perfectly there) and copied it to my Fedora 35 machine.

How would I solve this? Can you tell me where LO tries to load
"libadwaita-1.so.0" from? In order to correctly get this library into
the build path I updated the following files:

    configure.ac (lines 11641-11707) -> results in config_host.mk.in
(lines 267-268) and config_host.mk (lines 267-268)
    Library_vclplug_gtk3.mk and Library_vclplug_gtk4.mk
    in general here my autogen.input file

I attached all of these files to this email.

As I pointed out, this works on my Ubuntu machine, but not on the Fedora
one; so I guess when starting LO it for some reason can not find the
path to libadwaita-1.so.0. On my Fedora system it is located at
"usr/local/lib64" (just checked) which is included in "pkg-config --libs
libadwaita-1" (see the output attached below).

Can you help me out with this one please?


Cheers,

Christian

PKG-Config:

pkg-config --cflags libadwaita-1
-I/usr/local/include/libadwaita-1 -I/usr/local/include/gtk-4.0
-I/usr/include/pango-1.0 -I/usr/include/glib-2.0
-I/usr/lib64/glib-2.0/include -I/usr/include/sysprof-4
-I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16
-I/usr/include/libmount -I/usr/include/blkid -I/usr/include/fribidi
-I/usr/include/libxml2 -I/usr/include/cairo -I/usr/include/pixman-1
-I/usr/include/gdk-pixbuf-2.0 -I/usr/include/graphene-1.0
-I/usr/lib64/graphene-1.0/include -mfpmath=sse -msse -msse2
-I/usr/include/gio-unix-2.0 -pthread

pkg-config --libs libadwaita-1
-L/usr/local/lib64 -ladwaita-1 -lgtk-4 -lpangocairo-1.0 -lpango-1.0
-lharfbuzz -lgdk_pixbuf-2.0 -lcairo-gobject -lcairo -lvulkan
-lgraphene-1.0 -lgio-2.0 -lgobject-2.0 -lglib-2.0

LO application start log:
./instdir/program/soffice -env:SAL_USE_VCLPLUGIN=gtk4
warn:sal.osl:180140:180140:sal/osl/unx/module.cxx:152:
dlopen(/home/christian/repos/libreoffice/instdir/program/libvclplug_gtk4lo.so,
257): libadwaita-1.so.0: cannot open shared object file: No such file or
directory
warn:vcl.plugadapt:180140:180140:vcl/source/app/salplug.cxx:128: could
not load shared object libvclplug_gtk4lo.so
warn:sal.osl:180140:180140:sal/osl/unx/module.cxx:152:
dlopen(/home/christian/repos/libreoffice/instdir/program/libvclplug_gtk3lo.so,
257): libadwaita-1.so.0: cannot open shared object file: No such file or
directory
warn:desktop.app:180140:180140:unotools/source/ucbhelper/localfilehelper.cxx:87:
error removing directory
file:///home/christian/repos/libreoffice/instdir/program/../program/../user/extensions
warn:configmgr:180140:180140:configmgr/source/xcuparser.cxx:901:
ignoring modify of unknown set member node "StarOffice XML (Base)
Report" in
"file:///home/christian/repos/libreoffice/instdir/program/../share/registry/res/fcfg_langpack_en-US.xcd"
warn:configmgr:180140:180140:configmgr/source/xcuparser.cxx:901:
ignoring modify of unknown set member node "StarOffice XML (Base) Report
Chart" in
"file:///home/christian/repos/libreoffice/instdir/program/../share/registry/res/fcfg_langpack_en-US.xcd"
warn:configmgr:180140:180140:configmgr/source/xcuparser.cxx:289: unknown
component "org.openoffice.Office.UI.DbReportWindowState" in
"file:///home/christian/repos/libreoffice/instdir/program/../share/registry/res/registry_en-US.xcd"
warn:configmgr:180140:180140:configmgr/source/xcuparser.cxx:289: unknown
component "org.openoffice.Office.UI.ReportCommands" in
"file:///home/christian/repos/libreoffice/instdir/program/../share/registry/res/registry_en-US.xcd"
warn:vcl.fonts:180140:180140:vcl/unx/generic/fontmanager/fontmanager.cxx:665:
Could not OpenTTFont
"/usr/share/fonts/julietaula-montserrat/Montserrat-Bold.woff": 6
warn:vcl.fonts:180140:180140:vcl/unx/generic/fontmanager/fontmanager.cxx:665:
Could not OpenTTFont
"/usr/share/fonts/julietaula-montserrat/Montserrat-Bold.woff2": 6
warn:vcl.fonts:180140:180140:vcl/unx/generic/fontmanager/fontmanager.cxx:665:
Could not OpenTTFont
"/usr/share/fonts/julietaula-montserrat/Montserrat-ExtraBold.woff": 6
warn:vcl.fonts:180140:180140:vcl/unx/generic/fontmanager/fontmanager.cxx:665:
Could not OpenTTFont
"/usr/share/fonts/julietaula-montserrat/Montserrat-ExtraBold.woff2": 6
warn:vcl.fonts:180140:180140:vcl/unx/generic/fontmanager/fontmanager.cxx:665:
Could not OpenTTFont
"/usr/share/fonts/julietaula-montserrat/Montserrat-Italic.woff": 6
warn:vcl.fonts:180140:180140:vcl/unx/generic/fontmanager/fontmanager.cxx:665:
Could not OpenTTFont
"/usr/share/fonts/julietaula-montserrat/Montserrat-Italic.woff2": 6
warn:vcl.fonts:180140:180140:vcl/unx/generic/fontmanager/fontmanager.cxx:665:
Could not OpenTTFont
"/usr/share/fonts/julietaula-montserrat/Montserrat-Light.woff": 6
warn:vcl.fonts:180140:180140:vcl/unx/generic/fontmanager/fontmanager.cxx:665:
Could not OpenTTFont
"/usr/share/fonts/julietaula-montserrat/Montserrat-Light.woff2": 6
warn:vcl.fonts:180140:180140:vcl/unx/generic/fontmanager/fontmanager.cxx:665:
Could not OpenTTFont
"/usr/share/fonts/julietaula-montserrat/Montserrat-Regular.woff": 6
warn:vcl.fonts:180140:180140:vcl/unx/generic/fontmanager/fontmanager.cxx:665:
Could not OpenTTFont
"/usr/share/fonts/julietaula-montserrat/Montserrat-Regular.woff2": 6
warn:sal.osl:180150:180150:sal/osl/unx/module.cxx:152:
dlopen(/home/christian/repos/libreoffice/instdir/program/libvclplug_gtk4lo.so,
257): libadwaita-1.so.0: cannot open shared object file: No such file or
directory
warn:vcl.plugadapt:180150:180150:vcl/source/app/salplug.cxx:128: could
not load shared object libvclplug_gtk4lo.so
warn:sal.osl:180150:180150:sal/osl/unx/module.cxx:152:
dlopen(/home/christian/repos/libreoffice/instdir/program/libvclplug_gtk3lo.so,
257): libadwaita-1.so.0: cannot open shared object file: No such file or
directory
warn:configmgr:180150:180150:configmgr/source/xcuparser.cxx:901:
ignoring modify of unknown set member node "StarOffice XML (Base)
Report" in
"file:///home/christian/repos/libreoffice/instdir/program/../share/registry/res/fcfg_langpack_en-US.xcd"
warn:configmgr:180150:180150:configmgr/source/xcuparser.cxx:901:
ignoring modify of unknown set member node "StarOffice XML (Base) Report
Chart" in
"file:///home/christian/repos/libreoffice/instdir/program/../share/registry/res/fcfg_langpack_en-US.xcd"
warn:configmgr:180150:180150:configmgr/source/xcuparser.cxx:289: unknown
component "org.openoffice.Office.UI.DbReportWindowState" in
"file:///home/christian/repos/libreoffice/instdir/program/../share/registry/res/registry_en-US.xcd"
warn:configmgr:180150:180150:configmgr/source/xcuparser.cxx:289: unknown
component "org.openoffice.Office.UI.ReportCommands" in
"file:///home/christian/repos/libreoffice/instdir/program/../share/registry/res/registry_en-US.xcd"
warn:vcl.fonts:180150:180150:vcl/unx/generic/fontmanager/fontmanager.cxx:665:
Could not OpenTTFont
"/usr/share/fonts/julietaula-montserrat/Montserrat-Bold.woff": 6
warn:vcl.fonts:180150:180150:vcl/unx/generic/fontmanager/fontmanager.cxx:665:
Could not OpenTTFont
"/usr/share/fonts/julietaula-montserrat/Montserrat-Bold.woff2": 6
warn:vcl.fonts:180150:180150:vcl/unx/generic/fontmanager/fontmanager.cxx:665:
Could not OpenTTFont
"/usr/share/fonts/julietaula-montserrat/Montserrat-ExtraBold.woff": 6
warn:vcl.fonts:180150:180150:vcl/unx/generic/fontmanager/fontmanager.cxx:665:
Could not OpenTTFont
"/usr/share/fonts/julietaula-montserrat/Montserrat-ExtraBold.woff2": 6
warn:vcl.fonts:180150:180150:vcl/unx/generic/fontmanager/fontmanager.cxx:665:
Could not OpenTTFont
"/usr/share/fonts/julietaula-montserrat/Montserrat-Italic.woff": 6
warn:vcl.fonts:180150:180150:vcl/unx/generic/fontmanager/fontmanager.cxx:665:
Could not OpenTTFont
"/usr/share/fonts/julietaula-montserrat/Montserrat-Italic.woff2": 6
warn:vcl.fonts:180150:180150:vcl/unx/generic/fontmanager/fontmanager.cxx:665:
Could not OpenTTFont
"/usr/share/fonts/julietaula-montserrat/Montserrat-Light.woff": 6
warn:vcl.fonts:180150:180150:vcl/unx/generic/fontmanager/fontmanager.cxx:665:
Could not OpenTTFont
"/usr/share/fonts/julietaula-montserrat/Montserrat-Light.woff2": 6
warn:vcl.fonts:180150:180150:vcl/unx/generic/fontmanager/fontmanager.cxx:665:
Could not OpenTTFont
"/usr/share/fonts/julietaula-montserrat/Montserrat-Regular.woff": 6
warn:vcl.fonts:180150:180150:vcl/unx/generic/fontmanager/fontmanager.cxx:665:
Could not OpenTTFont
"/usr/share/fonts/julietaula-montserrat/Montserrat-Regular.woff2": 6
warn:opencl:180150:180150:desktop/source/app/opencl.cxx:206: Failed to
initialize OpenCL for test
warn:vcl.gdi:180150:180150:vcl/unx/generic/gdi/salbmp.cxx:139: 32-bit
images not supported, converting to 24-bit
warn:vcl.gdi:180150:180150:vcl/unx/generic/gdi/salbmp.cxx:139: 32-bit
images not supported, converting to 24-bit
warn:vcl.gdi:180150:180150:vcl/unx/generic/gdi/salbmp.cxx:139: 32-bit
images not supported, converting to 24-bit
warn:vcl.gdi:180150:180150:vcl/unx/generic/gdi/salbmp.cxx:139: 32-bit
images not supported, converting to 24-bit
warn:vcl.gdi:180150:180150:vcl/unx/generic/gdi/salbmp.cxx:139: 32-bit
images not supported, converting to 24-bit
warn:vcl.schedule.deinit:180150:180150:vcl/source/app/scheduler.cxx:177:
DeInit task: Timer a: 1 p: 1 framework::AutoRecovery m_aTimer 600000ms
(0x22ff168)
warn:vcl.schedule.deinit:180150:180150:vcl/source/app/scheduler.cxx:177:
DeInit task: Timer a: 1 p: 1 desktop::Desktop m_firstRunTimer 3000ms
(0x7fff54753e60) (ignored)
warn:vcl.schedule.deinit:180150:180150:vcl/source/app/scheduler.cxx:197:
DeInit active tasks: 2 (ignored: 1)
-------------- next part --------------
# -*- Mode: makefile-gmake; tab-width: 4; indent-tabs-mode: t -*-
#
# This file is part of the LibreOffice project.
#
# This Source Code Form is subject to the terms of the Mozilla Public
# License, v. 2.0. If a copy of the MPL was not distributed with this
# file, You can obtain one at http://mozilla.org/MPL/2.0/.
#
# This file incorporates work covered by the following license notice:
#
#   Licensed to the Apache Software Foundation (ASF) under one or more
#   contributor license agreements. See the NOTICE file distributed
#   with this work for additional information regarding copyright
#   ownership. The ASF licenses this file to you under the Apache
#   License, Version 2.0 (the "License"); you may not use this file
#   except in compliance with the License. You may obtain a copy of
#   the License at http://www.apache.org/licenses/LICENSE-2.0 .
#

$(eval $(call gb_Library_Library,vclplug_gtk3))

$(eval $(call gb_Library_set_plugin_for,vclplug_gtk3,vcl))

# Silence deprecation warnings wholesale as long as vcl/unx/gtk3/*.cxx just
# forward to vcl/unx/gtk/*.cxx:
$(eval $(call gb_Library_add_cxxflags,vclplug_gtk3, \
    -Wno-deprecated-declarations \
))

$(eval $(call gb_Library_set_include,vclplug_gtk3,\
    $$(INCLUDE) \
    $$(GTK3_CFLAGS) \
	$$(LIBADWAITA_CFLAGS) \
    $$(GSTREAMER_1_0_CFLAGS) \
    -I$(SRCDIR)/vcl/inc \
    -I$(SRCDIR)/vcl/unx \
    -I$(SRCDIR)/vcl/unx/gtk3 \
))

$(eval $(call gb_Library_add_defs,vclplug_gtk3,\
    -DVCLPLUG_GTK_IMPLEMENTATION \
    -DVCL_INTERNALS \
))

$(eval $(call gb_Library_use_custom_headers,vclplug_gtk3,\
	officecfg/registry \
))

$(eval $(call gb_Library_use_sdk_api,vclplug_gtk3))

$(eval $(call gb_Library_add_libs,vclplug_gtk3,\
	$(GTK3_LIBS) \
	$(LIBADWAITA_LIBS) \
	-lX11 \
	-lXext \
	-lSM \
	-lICE \
))

$(eval $(call gb_Library_use_libraries,vclplug_gtk3,\
    svl \
    tl \
    utl \
    sot \
    ucbhelper \
    basegfx \
    comphelper \
    cppuhelper \
    i18nlangtag \
    i18nutil \
    $(if $(ENABLE_JAVA), \
        jvmaccess) \
    cppu \
    sal \
))

$(eval $(call gb_Library_use_externals,vclplug_gtk3,\
	boost_headers \
	epoxy \
	dbus \
	graphite \
	harfbuzz \
))

$(eval $(call gb_Library_add_exception_objects,vclplug_gtk3,\
    vcl/unx/gtk3/a11y/atkaction \
    vcl/unx/gtk3/a11y/atkbridge \
    vcl/unx/gtk3/a11y/atkcomponent \
    vcl/unx/gtk3/a11y/atkeditabletext \
    vcl/unx/gtk3/a11y/atkfactory \
    vcl/unx/gtk3/a11y/atkhypertext \
    vcl/unx/gtk3/a11y/atkimage \
    vcl/unx/gtk3/a11y/atklistener \
    vcl/unx/gtk3/a11y/atkregistry \
    vcl/unx/gtk3/a11y/atkselection \
    vcl/unx/gtk3/a11y/atktable \
    vcl/unx/gtk3/a11y/atktextattributes \
    vcl/unx/gtk3/a11y/atktext \
    vcl/unx/gtk3/a11y/atkutil \
    vcl/unx/gtk3/a11y/atkvalue \
    vcl/unx/gtk3/a11y/atkwrapper \
    vcl/unx/gtk3/fpicker/resourceprovider \
    vcl/unx/gtk3/fpicker/SalGtkFilePicker \
    vcl/unx/gtk3/fpicker/SalGtkFolderPicker \
    vcl/unx/gtk3/fpicker/SalGtkPicker \
    vcl/unx/gtk3/customcellrenderer \
    vcl/unx/gtk3/gtkdata \
    vcl/unx/gtk3/gtkinst \
    vcl/unx/gtk3/gtksys \
    vcl/unx/gtk3/gtkcairo \
    vcl/unx/gtk3/salnativewidgets-gtk \
    vcl/unx/gtk3/gtkframe \
    vcl/unx/gtk3/gtkobject \
	vcl/unx/gtk3/gtksalmenu \
	vcl/unx/gtk3/glomenu \
	vcl/unx/gtk3/gloactiongroup \
    vcl/unx/gtk3/hudawareness \
))

ifeq ($(OS),LINUX)
$(eval $(call gb_Library_add_libs,vclplug_gtk3,\
	-lm \
	-ldl \
))
endif

# vim: set noet sw=4 ts=4:
-------------- next part --------------
# -*- Mode: makefile-gmake; tab-width: 4; indent-tabs-mode: t -*-
#
# This file is part of the LibreOffice project.
#
# This Source Code Form is subject to the terms of the Mozilla Public
# License, v. 2.0. If a copy of the MPL was not distributed with this
# file, You can obtain one at http://mozilla.org/MPL/2.0/.
#
# This file incorporates work covered by the following license notice:
#
#   Licensed to the Apache Software Foundation (ASF) under one or more
#   contributor license agreements. See the NOTICE file distributed
#   with this work for additional information regarding copyright
#   ownership. The ASF licenses this file to you under the Apache
#   License, Version 2.0 (the "License"); you may not use this file
#   except in compliance with the License. You may obtain a copy of
#   the License at http://www.apache.org/licenses/LICENSE-2.0 .
#

$(eval $(call gb_Library_Library,vclplug_gtk4))

$(eval $(call gb_Library_set_plugin_for,vclplug_gtk4,vcl))

# Silence deprecation warnings wholesale as long as vcl/unx/gtk4/*.cxx just
# forward to vcl/unx/gtk/*.cxx:
$(eval $(call gb_Library_add_cxxflags,vclplug_gtk4, \
    -Wno-deprecated-declarations \
))

$(eval $(call gb_Library_set_include,vclplug_gtk4,\
    $$(INCLUDE) \
    $$(GTK4_CFLAGS) \
	$$(LIBADWAITA_CFLAGS) \
    $$(GSTREAMER_1_0_CFLAGS) \
    -I$(SRCDIR)/vcl/inc \
    -I$(SRCDIR)/vcl/unx \
    -I$(SRCDIR)/vcl/unx/gtk4 \
))

$(eval $(call gb_Library_add_defs,vclplug_gtk4,\
    -DVCLPLUG_GTK_IMPLEMENTATION \
    -DVCL_INTERNALS \
))

$(eval $(call gb_Library_use_custom_headers,vclplug_gtk4,\
	officecfg/registry \
))

$(eval $(call gb_Library_use_sdk_api,vclplug_gtk4))

$(eval $(call gb_Library_add_libs,vclplug_gtk4,\
	$(GTK4_LIBS) \
	$(LIBADWAITA_LIBS) \
	-lX11 \
	-lXext \
	-lSM \
	-lICE \
))

$(eval $(call gb_Library_use_libraries,vclplug_gtk4,\
    svl \
    tl \
    utl \
    sot \
    ucbhelper \
    basegfx \
    comphelper \
    cppuhelper \
    i18nlangtag \
    i18nutil \
    $(if $(ENABLE_JAVA), \
        jvmaccess) \
    cppu \
    sal \
))

$(eval $(call gb_Library_use_externals,vclplug_gtk4,\
	boost_headers \
	epoxy \
	dbus \
	graphite \
	harfbuzz \
))

$(eval $(call gb_Library_add_exception_objects,vclplug_gtk4,\
    vcl/unx/gtk4/fpicker/resourceprovider \
    vcl/unx/gtk4/fpicker/SalGtkFilePicker \
    vcl/unx/gtk4/fpicker/SalGtkFolderPicker \
    vcl/unx/gtk4/fpicker/SalGtkPicker \
    vcl/unx/gtk4/convert3to4 \
    vcl/unx/gtk4/customcellrenderer \
    vcl/unx/gtk4/gtkdata \
    vcl/unx/gtk4/gtkinst \
    vcl/unx/gtk4/gtksys \
    vcl/unx/gtk4/gtkcairo \
    vcl/unx/gtk4/salnativewidgets-gtk \
    vcl/unx/gtk4/gtkframe \
    vcl/unx/gtk4/gtkobject \
    vcl/unx/gtk4/gtksalmenu \
    vcl/unx/gtk4/glomenu \
    vcl/unx/gtk4/gloactiongroup \
    vcl/unx/gtk4/hudawareness \
    vcl/unx/gtk4/notifyinglayout \
    vcl/unx/gtk4/surfacepaintable \
    vcl/unx/gtk4/transferableprovider \
))

ifeq ($(OS),LINUX)
$(eval $(call gb_Library_add_libs,vclplug_gtk4,\
	-lm \
	-ldl \
))
endif

# vim: set noet sw=4 ts=4:
-------------- next part --------------
# GTK4
--enable-gtk4
--disable-werror

# Disable GTK3
#--disable-gtk3

--enable-debug
--enable-dbgutil
--without-java
--without-help

# Use icecream
#--enable-icecream
--with-parallelism=12

# General Parallelism (no argument defaults to number of cpu cores available)
#--with-parallelism

# Build DEB packages
#--with-distro=LibreOfficeLinux
#--with-package-format=deb
#--enable-epm

# Additional language support
#--with-lang=tr
-------------- next part --------------
dnl -*- Mode: Autoconf; tab-width: 4; indent-tabs-mode: nil; fill-column: 100 -*-
dnl configure.ac serves as input for the GNU autoconf package
dnl in order to create a configure script.

# The version number in the second argument to AC_INIT should be four numbers separated by
# periods. Some parts of the code requires the first one to be less than 128 and the others to be less
# than 256. The four numbers can optionally be followed by a period and a free-form string containing
# no spaces or periods, like "frobozz-mumble-42" or "alpha0". If the free-form string ends with one or
# several non-alphanumeric characters, those are split off and used only for the
# ABOUTBOXPRODUCTVERSIONSUFFIX in openoffice.lst. Why that is necessary, no idea.

AC_INIT([LibreOffice],[7.4.0.0.alpha0+],[],[],[http://documentfoundation.org/])

dnl libnumbertext needs autoconf 2.68, but that can pick up autoconf268 just fine if it is installed
dnl whereas aclocal (as run by autogen.sh) insists on using autoconf and fails hard
dnl so check for the version of autoconf that is actually used to create the configure script
AC_PREREQ([2.59])
m4_if(m4_version_compare(m4_defn([AC_AUTOCONF_VERSION]), [2.68]), -1,
    [AC_MSG_ERROR([at least autoconf version 2.68 is needed (you can use AUTOCONF environment variable to point to a suitable one)])])

if test -n "$BUILD_TYPE"; then
    AC_MSG_ERROR([You have sourced config_host.mk in this shell.  This may lead to trouble, please run in a fresh (login) shell.])
fi

save_CC=$CC
save_CXX=$CXX

first_arg_basename()
{
    for i in $1; do
        basename "$i"
        break
    done
}

CC_BASE=`first_arg_basename "$CC"`
CXX_BASE=`first_arg_basename "$CXX"`

BUILD_TYPE="LibO"
SCPDEFS=""
GIT_NEEDED_SUBMODULES=""
LO_PATH= # used by path_munge to construct a PATH variable

FilterLibs()
{
    # Return value: $filteredlibs

    filteredlibs=
    for f in $1; do
        case "$f" in
            # let's start with Fedora's paths for now
            -L/lib|-L/lib/|-L/lib64|-L/lib64/|-L/usr/lib|-L/usr/lib/|-L/usr/lib64|-L/usr/lib64/)
                # ignore it: on UNIXoids it is searched by default anyway
                # but if it's given explicitly then it may override other paths
                # (on macOS it would be an error to use it instead of SDK)
                ;;
            *)
                filteredlibs="$filteredlibs $f"
                ;;
        esac
    done
}

PathFormat()
{
    # Args: $1: A pathname. On Cygwin and WSL, in either the Unix or the Windows format. Note that this
    # function is called also on Unix.
    #
    # Return value: $formatted_path and $formatted_path_unix.
    #
    # $formatted_path is the argument in Windows format, but using forward slashes instead of
    # backslashes, using 8.3 pathname components if necessary (if it otherwise would contains spaces
    # or shell metacharacters).
    #
    # $formatted_path_unix is the argument in a form usable in Cygwin or WSL, using 8.3 components if
    # necessary. On Cygwin, it is the same as $formatted_path, but on WSL it is $formatted_path as a
    # Unix pathname.
    #
    # Errors out if 8.3 names are needed but aren't present for some of the path components.

    # Examples:
    #
    # /home/tml/lo/master-optimised => C:/cygwin64/home/tml/lo/master-optimised
    #
    # C:\Program Files (x86)\Microsoft Visual Studio\Installer\vswhere.exe => C:/PROGRA~2/MICROS~3/INSTAL~1/vswhere.exe
    #
    # C:\Program Files (x86)\Microsoft Visual Studio\2019\Community => C:/PROGRA~2/MICROS~3/2019/COMMUN~1
    #
    # C:/PROGRA~2/WI3CF2~1/10/Include/10.0.18362.0/ucrt => C:/PROGRA~2/WI3CF2~1/10/Include/10.0.18362.0/ucrt
    #
    # /cygdrive/c/PROGRA~2/WI3CF2~1/10 => C:/PROGRA~2/WI3CF2~1/10
    #
    # C:\Program Files (x86)\Windows Kits\NETFXSDK\4.8\ => C:/PROGRA~2/WI3CF2~1/NETFXSDK/4.8/
    #
    # /usr/bin/find.exe => C:/cygwin64/bin/find.exe

    if test -n "$UNITTEST_WSL_PATHFORMAT"; then
        printf "PathFormat $1 ==> "
    fi

    formatted_path="$1"
    if test "$build_os" = "cygwin" -o "$build_os" = "wsl"; then
        if test "$build_os" = "wsl"; then
            formatted_path=$(echo "$formatted_path" | tr -d '\r')
        fi

        pf_conv_to_dos=
        # spaces,parentheses,brackets,braces are problematic in pathname
        # so are backslashes
        case "$formatted_path" in
            *\ * | *\)* | *\(* | *\{* | *\}* | *\[* | *\]* | *\\* )
                pf_conv_to_dos="yes"
            ;;
        esac
        if test "$pf_conv_to_dos" = "yes"; then
            if test "$build_os" = "wsl"; then
                case "$formatted_path" in
                    /*)
                        formatted_path=$(wslpath -w "$formatted_path")
                        ;;
                esac
                formatted_path=$($BUILDDIR/solenv/wsl/wsl-lo-helper.exe --8.3 "$formatted_path")
            elif test "$GNUMAKE_WIN_NATIVE" = "TRUE" ; then
                formatted_path=`cygpath -sm "$formatted_path"`
            else
                formatted_path=`cygpath -d "$formatted_path"`
            fi
            if test $? -ne 0;  then
                AC_MSG_ERROR([path conversion failed for "$1".])
            fi
        fi
        fp_count_colon=`echo "$formatted_path" | $GREP -c "[:]"`
        fp_count_slash=`echo "$formatted_path" | $GREP -c "[/]"`
        if test "$fp_count_slash$fp_count_colon" != "00"; then
            if test "$fp_count_colon" = "0"; then
                new_formatted_path=`realpath "$formatted_path"`
                if test $? -ne 0;  then
                    AC_MSG_WARN([realpath failed for "$formatted_path", not necessarily a problem.])
                else
                    formatted_path="$new_formatted_path"
                fi
            fi
            if test "$build_os" = "wsl"; then
                if test "$fp_count_colon" != "0"; then
                    formatted_path=$(wslpath "$formatted_path")
                    local final_slash=
                    case "$formatted_path" in
                        */)
                            final_slash=/
                            ;;
                    esac
                    formatted_path=$(wslpath -m $formatted_path)
                    case "$formatted_path" in
                        */)
                            ;;
                        *)
                            formatted_path="$formatted_path"$final_slash
                            ;;
                    esac
                else
                    formatted_path=$(wslpath -m "$formatted_path")
                fi
            else
                formatted_path=`cygpath -m "$formatted_path"`
            fi
            if test $? -ne 0;  then
                AC_MSG_ERROR([path conversion failed for "$1".])
            fi
        fi
        fp_count_space=`echo "$formatted_path" | $GREP -c "[ ]"`
        if test "$fp_count_space" != "0"; then
            AC_MSG_ERROR([converted path "$formatted_path" still contains spaces. Short filenames (8.3 filenames) support was disabled on this system?])
        fi
    fi
    if test "$build_os" = "wsl"; then
        # WSL can't run Windows binaries from Windows pathnames so we need a separate return value in Unix format
        formatted_path_unix=$(wslpath "$formatted_path")
    else
        # But Cygwin can
        formatted_path_unix="$formatted_path"
    fi
}

AbsolutePath()
{
    # There appears to be no simple and portable method to get an absolute and
    # canonical path, so we try creating the directory if does not exist and
    # utilizing the shell and pwd.

    # Args: $1: A possibly relative pathname
    # Return value: $absolute_path

    local rel="$1"
    absolute_path=""
    test ! -e "$rel" && mkdir -p "$rel"
    if test -d "$rel" ; then
        cd "$rel" || AC_MSG_ERROR([absolute path resolution failed for "$rel".])
        absolute_path="$(pwd)"
        cd - > /dev/null
    else
        AC_MSG_ERROR([Failed to resolve absolute path.  "$rel" does not exist or is not a directory.])
    fi
}

WARNINGS_FILE=config.warn
WARNINGS_FILE_FOR_BUILD=config.Build.warn
rm -f "$WARNINGS_FILE" "$WARNINGS_FILE_FOR_BUILD"
have_WARNINGS="no"
add_warning()
{
    if test "$have_WARNINGS" = "no"; then
        echo "*************************************" > "$WARNINGS_FILE"
        have_WARNINGS="yes"
        if which tput >/dev/null && test "`tput colors 2>/dev/null || echo 0`" -ge 8; then
            dnl <esc> as actual byte (U+1b), [ escaped using quadrigraph @<:@
            COLORWARN='*@<:@1;33;40m WARNING @<:@0m:'
        else
            COLORWARN="* WARNING :"
        fi
    fi
    echo "$COLORWARN $@" >> "$WARNINGS_FILE"
}

dnl Some Mac User have the bad habit of letting a lot of crap
dnl accumulate in their PATH and even adding stuff in /usr/local/bin
dnl that confuse the build.
dnl For the ones that use LODE, let's be nice and protect them
dnl from themselves

mac_sanitize_path()
{
    mac_path="$LODE_HOME/opt/bin:/usr/bin:/bin:/usr/sbin:/sbin"
dnl a common but nevertheless necessary thing that may be in a fancy
dnl path location is git, so make sure we have it
    mac_git_path=`which git 2>/dev/null`
    if test -n "$mac_git_path" -a -x "$mac_git_path" -a "$mac_git_path" != "/usr/bin/git" ; then
        mac_path="$mac_path:`dirname $mac_git_path`"
    fi
dnl a not so common but nevertheless quite helpful thing that may be in a fancy
dnl path location is gpg, so make sure we find it
    mac_gpg_path=`which gpg 2>/dev/null`
    if test -n "$mac_gpg_path" -a -x "$mac_gpg_path" -a "$mac_gpg_path" != "/usr/bin/gpg" ; then
        mac_path="$mac_path:`dirname $mac_gpg_path`"
    fi
    PATH="$mac_path"
    unset mac_path
    unset mac_git_path
    unset mac_gpg_path
}

echo "********************************************************************"
echo "*"
echo "*   Running ${PACKAGE_NAME} build configuration."
echo "*"
echo "********************************************************************"
echo ""

dnl ===================================================================
dnl checks build and host OSes
dnl do this before argument processing to allow for platform dependent defaults
dnl ===================================================================

# Check for WSL (version 2, at least). But if --host is explicitly specified (to really do build for
# Linux on WSL) trust that.
if test -z "$host" -a -z "$build" -a "`wslsys -v 2>/dev/null`" != ""; then
    ac_cv_host="x86_64-pc-wsl"
    ac_cv_host_cpu="x86_64"
    ac_cv_host_os="wsl"
    ac_cv_build="$ac_cv_host"
    ac_cv_build_cpu="$ac_cv_host_cpu"
    ac_cv_build_os="$ac_cv_host_os"

    # Emulation of Cygwin's cygpath command for WSL.
    cygpath()
    {
        if test -n "$UNITTEST_WSL_CYGPATH"; then
            echo -n cygpath "$@" "==> "
        fi

        # Cygwin's real cygpath has a plethora of options but we use only a few here.
        local args="$@"
        local opt
        local opt_d opt_m opt_u opt_w opt_l opt_s opt_p
        OPTIND=1

        while getopts dmuwlsp opt; do
            case "$opt" in
                \?)
                    AC_MSG_ERROR([Unimplemented cygpath emulation option in invocation: cygpath $args])
                    ;;
                ?)
                    eval opt_$opt=yes
                    ;;
            esac
        done

        shift $((OPTIND-1))

        if test $# -ne 1; then
            AC_MSG_ERROR([Invalid cygpath emulation invocation: Pathname missing]);
        fi

        local input="$1"

        local result

        if test -n "$opt_d" -o -n "$opt_m" -o -n "$opt_w"; then
            # Print Windows path, possibly in 8.3 form (-d) or with forward slashes (-m)

            if test -n "$opt_u"; then
                AC_MSG_ERROR([Invalid cygpath invocation: Both Windows and Unix path output requested])
            fi

            case "$input" in
                /mnt/*)
                    # A Windows file in WSL format
                    input=$(wslpath -w "$input")
                    ;;
                [[a-zA-Z]]:\\* | \\* | [[a-zA-Z]]:/* | /*)
                    # Already in Windows format
                    ;;
                /*)
                    input=$(wslpath -w "$input")
                    ;;
                *)
                    AC_MSG_ERROR([Invalid cygpath invocation: Path '$input' is not absolute])
                    ;;
            esac
            if test -n "$opt_d" -o -n "$opt_s"; then
                input=$($BUILDDIR/solenv/wsl/wsl-lo-helper.exe --8.3 "$input")
            fi
            if test -n "$opt_m"; then
                input="${input//\\//}"
            fi
            echo "$input"
        else
            # Print Unix path

            case "$input" in
                [[a-zA-Z]]:\\* | \\* | [[a-zA-Z]]:/* | /*)
                    wslpath -u "$input"
                    ;;
                /)
                    echo "$input"
                    ;;
                *)
                    AC_MSG_ERROR([Invalid cygpath invocation: Path '$input' is not absolute])
                    ;;
            esac
        fi
    }

    if test -n "$UNITTEST_WSL_CYGPATH"; then
        BUILDDIR=.

        # Nothing special with these file names, just arbitrary ones picked to test with
        cygpath -d /usr/lib64/ld-linux-x86-64.so.2
        cygpath -w /usr/lib64/ld-linux-x86-64.so.2
        cygpath -m /usr/lib64/ld-linux-x86-64.so.2
        cygpath -m -s /usr/lib64/ld-linux-x86-64.so.2
        # At least on my machine for instance this file does have an 8.3 name
        cygpath -d /mnt/c/windows/WindowsUpdate.log
        # But for instance this one doesn't
        cygpath -w /mnt/c/windows/system32/AboutSettingsHandlers.dll
        cygpath -ws /mnt/c/windows/WindowsUpdate.log
        cygpath -m /mnt/c/windows/system32/AboutSettingsHandlers.dll
        cygpath -ms /mnt/c/windows/WindowsUpdate.log

        cygpath -u 'c:\windows\system32\AboutSettingsHandlers.dll'
        cygpath -u 'c:/windows/system32/AboutSettingsHandlers.dll'

        exit 0
    fi
fi

AC_CANONICAL_HOST
AC_CANONICAL_BUILD

if test -n "$UNITTEST_WSL_PATHFORMAT"; then
    BUILDDIR=.
    GREP=grep

    # Use of PathFormat must be after AC_CANONICAL_BUILD above
    PathFormat /
    printf "$formatted_path , $formatted_path_unix\n"

    PathFormat $PWD
    printf "$formatted_path , $formatted_path_unix\n"

    PathFormat "$PROGRAMFILESX86"
    printf "$formatted_path , $formatted_path_unix\n"

    exit 0
fi

AC_MSG_CHECKING([for product name])
PRODUCTNAME="AC_PACKAGE_NAME"
if test -n "$with_product_name" -a "$with_product_name" != no; then
    PRODUCTNAME="$with_product_name"
fi
if test "$enable_release_build" = "" -o "$enable_release_build" = "no"; then
    PRODUCTNAME="${PRODUCTNAME}Dev"
fi
AC_MSG_RESULT([$PRODUCTNAME])
AC_SUBST(PRODUCTNAME)
PRODUCTNAME_WITHOUT_SPACES=$(printf %s "$PRODUCTNAME" | sed 's/ //g')
AC_SUBST(PRODUCTNAME_WITHOUT_SPACES)

dnl ===================================================================
dnl Our version is defined by the AC_INIT() at the top of this script.
dnl ===================================================================

AC_MSG_CHECKING([for package version])
if test -n "$with_package_version" -a "$with_package_version" != no; then
    PACKAGE_VERSION="$with_package_version"
fi
AC_MSG_RESULT([$PACKAGE_VERSION])

set `echo "$PACKAGE_VERSION" | sed "s/\./ /g"`

LIBO_VERSION_MAJOR=$1
LIBO_VERSION_MINOR=$2
LIBO_VERSION_MICRO=$3
LIBO_VERSION_PATCH=$4

LIBO_VERSION_SUFFIX=$5

# Split out LIBO_VERSION_SUFFIX_SUFFIX... horrible crack. But apparently wanted separately in
# openoffice.lst as ABOUTBOXPRODUCTVERSIONSUFFIX. Note that the double brackets are for m4's sake,
# they get undoubled before actually passed to sed.
LIBO_VERSION_SUFFIX_SUFFIX=`echo "$LIBO_VERSION_SUFFIX" | sed -e 's/.*[[a-zA-Z0-9]]\([[^a-zA-Z0-9]]*\)$/\1/'`
test -n "$LIBO_VERSION_SUFFIX_SUFFIX" && LIBO_VERSION_SUFFIX="${LIBO_VERSION_SUFFIX%${LIBO_VERSION_SUFFIX_SUFFIX}}"
# LIBO_VERSION_SUFFIX, if non-empty, should include the period separator
test -n "$LIBO_VERSION_SUFFIX" && LIBO_VERSION_SUFFIX=".$LIBO_VERSION_SUFFIX"

# The value for key CFBundleVersion in the Info.plist file must be a period-separated list of at most
# three non-negative integers. Please find more information about CFBundleVersion at
# https://developer.apple.com/documentation/bundleresources/information_property_list/cfbundleversion

# The value for key CFBundleShortVersionString in the Info.plist file must be a period-separated list
# of at most three non-negative integers. Please find more information about
# CFBundleShortVersionString at
# https://developer.apple.com/documentation/bundleresources/information_property_list/cfbundleshortversionstring

# But that is enforced only in the App Store, and we apparently want to break the rules otherwise.

if test "$enable_macosx_sandbox" = yes; then
    MACOSX_BUNDLE_SHORTVERSION=$LIBO_VERSION_MAJOR.$LIBO_VERSION_MINOR.`expr $LIBO_VERSION_MICRO '*' 1000 + $LIBO_VERSION_PATCH`
    MACOSX_BUNDLE_VERSION=$MACOSX_BUNDLE_SHORTVERSION
else
    MACOSX_BUNDLE_SHORTVERSION=$LIBO_VERSION_MAJOR.$LIBO_VERSION_MINOR.$LIBO_VERSION_MICRO.$LIBO_VERSION_PATCH
    MACOSX_BUNDLE_VERSION=$MACOSX_BUNDLE_SHORTVERSION$LIBO_VERSION_SUFFIX
fi

AC_SUBST(LIBO_VERSION_MAJOR)
AC_SUBST(LIBO_VERSION_MINOR)
AC_SUBST(LIBO_VERSION_MICRO)
AC_SUBST(LIBO_VERSION_PATCH)
AC_SUBST(LIBO_VERSION_SUFFIX)
AC_SUBST(LIBO_VERSION_SUFFIX_SUFFIX)
AC_SUBST(MACOSX_BUNDLE_SHORTVERSION)
AC_SUBST(MACOSX_BUNDLE_VERSION)

AC_DEFINE_UNQUOTED(LIBO_VERSION_MAJOR,$LIBO_VERSION_MAJOR)
AC_DEFINE_UNQUOTED(LIBO_VERSION_MINOR,$LIBO_VERSION_MINOR)
AC_DEFINE_UNQUOTED(LIBO_VERSION_MICRO,$LIBO_VERSION_MICRO)
AC_DEFINE_UNQUOTED(LIBO_VERSION_PATCH,$LIBO_VERSION_PATCH)

LIBO_THIS_YEAR=`date +%Y`
AC_DEFINE_UNQUOTED(LIBO_THIS_YEAR,$LIBO_THIS_YEAR)

dnl ===================================================================
dnl Product version
dnl ===================================================================
AC_MSG_CHECKING([for product version])
PRODUCTVERSION="$LIBO_VERSION_MAJOR.$LIBO_VERSION_MINOR"
AC_MSG_RESULT([$PRODUCTVERSION])
AC_SUBST(PRODUCTVERSION)

AC_PROG_EGREP
# AC_PROG_EGREP doesn't set GREP on all systems as well
AC_PATH_PROG(GREP, grep)

BUILDDIR=`pwd`
cd $srcdir
SRC_ROOT=`pwd`
cd $BUILDDIR
x_Cygwin=[\#]

dnl ======================================
dnl Required GObject introspection version
dnl ======================================
INTROSPECTION_REQUIRED_VERSION=1.32.0

dnl ===================================================================
dnl Search all the common names for GNU Make
dnl ===================================================================
AC_MSG_CHECKING([for GNU Make])

# try to use our own make if it is available and GNUMAKE was not already defined
if test -z "$GNUMAKE"; then
    if test -n "$LODE_HOME" -a -x "$LODE_HOME/opt/bin/make" ; then
        GNUMAKE="$LODE_HOME/opt/bin/make"
    elif test -x "/opt/lo/bin/make"; then
        GNUMAKE="/opt/lo/bin/make"
    fi
fi

GNUMAKE_WIN_NATIVE=
for a in "$MAKE" "$GNUMAKE" make gmake gnumake; do
    if test -n "$a"; then
        $a --version 2> /dev/null | grep GNU  2>&1 > /dev/null
        if test $? -eq 0;  then
            if test "$build_os" = "cygwin"; then
                if test -n "$($a -v | grep 'Built for Windows')" ; then
                    GNUMAKE="$(cygpath -m "$(which "$(cygpath -u $a)")")"
                    GNUMAKE_WIN_NATIVE="TRUE"
                else
                    GNUMAKE=`which $a`
                fi
            else
                GNUMAKE=`which $a`
            fi
            break
        fi
    fi
done
AC_MSG_RESULT($GNUMAKE)
if test -z "$GNUMAKE"; then
    AC_MSG_ERROR([not found. install GNU Make.])
else
    if test "$GNUMAKE_WIN_NATIVE" = "TRUE" ; then
        AC_MSG_NOTICE([Using a native Win32 GNU Make version.])
    fi
fi

win_short_path_for_make()
{
    local short_path="$1"
    if test "$GNUMAKE_WIN_NATIVE" = "TRUE" ; then
        cygpath -sm "$short_path"
    else
        cygpath -u "$(cygpath -d "$short_path")"
    fi
}


if test "$build_os" = "cygwin"; then
    PathFormat "$SRC_ROOT"
    SRC_ROOT="$formatted_path"
    PathFormat "$BUILDDIR"
    BUILDDIR="$formatted_path"
    x_Cygwin=
    AC_MSG_CHECKING(for explicit COMSPEC)
    if test -z "$COMSPEC"; then
        AC_MSG_ERROR([COMSPEC not set in environment, please set it and rerun])
    else
        AC_MSG_RESULT([found: $COMSPEC])
    fi
fi

AC_SUBST(SRC_ROOT)
AC_SUBST(BUILDDIR)
AC_SUBST(x_Cygwin)
AC_DEFINE_UNQUOTED(SRCDIR,"$SRC_ROOT")
AC_DEFINE_UNQUOTED(SRC_ROOT,"$SRC_ROOT")
AC_DEFINE_UNQUOTED(BUILDDIR,"$BUILDDIR")

if test "z$EUID" = "z0" -a "`uname -o 2>/dev/null`" = "Cygwin"; then
    AC_MSG_ERROR([You must build LibreOffice as a normal user - not using an administrative account])
fi

# need sed in os checks...
AC_PATH_PROGS(SED, sed)
if test -z "$SED"; then
    AC_MSG_ERROR([install sed to run this script])
fi

# Set the ENABLE_LTO variable
# ===================================================================
AC_MSG_CHECKING([whether to use link-time optimization])
if test -n "$enable_lto" -a "$enable_lto" != "no"; then
    ENABLE_LTO="TRUE"
    AC_MSG_RESULT([yes])
else
    ENABLE_LTO=""
    AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_LTO)

AC_ARG_ENABLE(fuzz-options,
    AS_HELP_STRING([--enable-fuzz-options],
        [Randomly enable or disable each of those configurable options
         that are supposed to be freely selectable without interdependencies,
         or where bad interaction from interdependencies is automatically avoided.])
)

dnl ===================================================================
dnl When building for Android, --with-android-ndk,
dnl --with-android-ndk-toolchain-version and --with-android-sdk are
dnl mandatory
dnl ===================================================================

AC_ARG_WITH(android-ndk,
    AS_HELP_STRING([--with-android-ndk],
        [Specify location of the Android Native Development Kit. Mandatory when building for Android.]),
,)

AC_ARG_WITH(android-ndk-toolchain-version,
    AS_HELP_STRING([--with-android-ndk-toolchain-version],
        [Specify which toolchain version to use, of those present in the
        Android NDK you are using. The default (and only supported version currently) is "clang5.0"]),,
        with_android_ndk_toolchain_version=clang5.0)

AC_ARG_WITH(android-sdk,
    AS_HELP_STRING([--with-android-sdk],
        [Specify location of the Android SDK. Mandatory when building for Android.]),
,)

AC_ARG_WITH(android-api-level,
    AS_HELP_STRING([--with-android-api-level],
        [Specify the API level when building for Android. Defaults to 16 for ARM and x86 and to 21 for ARM64 and x86-64]),
,)

ANDROID_NDK_HOME=
if test -z "$with_android_ndk" -a -e "$SRC_ROOT/external/android-ndk" -a "$build" != "$host"; then
    with_android_ndk="$SRC_ROOT/external/android-ndk"
fi
if test -n "$with_android_ndk"; then
    eval ANDROID_NDK_HOME=$with_android_ndk

    # Set up a lot of pre-canned defaults

    if test ! -f $ANDROID_NDK_HOME/RELEASE.TXT; then
        if test ! -f $ANDROID_NDK_HOME/source.properties; then
            AC_MSG_ERROR([Unrecognized Android NDK. Missing RELEASE.TXT or source.properties file in $ANDROID_NDK_HOME.])
        fi
        ANDROID_NDK_VERSION=`sed -n -e 's/Pkg.Revision = //p' $ANDROID_NDK_HOME/source.properties`
    else
        ANDROID_NDK_VERSION=`cut -f1 -d' ' <$ANDROID_NDK_HOME/RELEASE.TXT`
    fi
    if test -z "$ANDROID_NDK_VERSION";  then
        AC_MSG_ERROR([Failed to determine Android NDK version. Please check your installation.])
    fi
    case $ANDROID_NDK_VERSION in
    r9*|r10*)
        AC_MSG_ERROR([Building for Android is only supported with NDK versions above 16.x*])
        ;;
    11.1.*|12.1.*|13.1.*|14.1.*)
        AC_MSG_ERROR([Building for Android is only supported with NDK versions above 16.x.*])
        ;;
    16.*|17.*|18.*|19.*|20.*)
        ;;
    *)
        AC_MSG_WARN([Untested Android NDK version $ANDROID_NDK_VERSION, only versions 16.* til 20.* have been used successfully. Proceed at your own risk.])
        add_warning "Untested Android NDK version $ANDROID_NDK_VERSION, only versions 16.* til 20.* have been used successfully. Proceed at your own risk."
        ;;
    esac

    ANDROID_API_LEVEL=16
    if test -n "$with_android_api_level" ; then
        ANDROID_API_LEVEL="$with_android_api_level"
    fi

    android_cpu=$host_cpu
    if test $host_cpu = arm; then
        android_platform_prefix=arm-linux-androideabi
        android_gnu_prefix=$android_platform_prefix
        LLVM_TRIPLE=armv7a-linux-androideabi
        ANDROID_APP_ABI=armeabi-v7a
        ANDROIDCFLAGS="-mthumb -march=armv7-a -mfloat-abi=softfp -mfpu=neon -Wl,--fix-cortex-a8"
    elif test $host_cpu = aarch64; then
        android_platform_prefix=aarch64-linux-android
        android_gnu_prefix=$android_platform_prefix
        LLVM_TRIPLE=$android_platform_prefix
        # minimum android version that supports aarch64
        if test "$ANDROID_API_LEVEL" -lt "21" ; then
            ANDROID_API_LEVEL=21
        fi
        ANDROID_APP_ABI=arm64-v8a
    elif test $host_cpu = x86_64; then
        android_platform_prefix=x86_64-linux-android
        android_gnu_prefix=$android_platform_prefix
        LLVM_TRIPLE=$android_platform_prefix
        # minimum android version that supports x86_64
        ANDROID_API_LEVEL=21
        ANDROID_APP_ABI=x86_64
    else
        # host_cpu is something like "i386" or "i686" I guess, NDK uses
        # "x86" in some contexts
        android_cpu=x86
        android_platform_prefix=$android_cpu
        android_gnu_prefix=i686-linux-android
        LLVM_TRIPLE=$android_gnu_prefix
        ANDROID_APP_ABI=x86
    fi

    case "$with_android_ndk_toolchain_version" in
    clang5.0)
        ANDROID_GCC_TOOLCHAIN_VERSION=4.9
        ;;
    *)
        AC_MSG_ERROR([Unrecognized value for the --with-android-ndk-toolchain-version option. Building for Android is only supported with Clang 5.*])
    esac

    AC_MSG_NOTICE([using the Android API level... $ANDROID_API_LEVEL])

    # NDK 15 or later toolchain is 64bit-only, except for Windows that we don't support. Using a 64-bit
    # linker is required if you compile large parts of the code with -g. A 32-bit linker just won't
    # manage to link the (app-specific) single huge .so that is built for the app in
    # android/source/ if there is debug information in a significant part of the object files.
    # (A 64-bit ld.gold grows too much over 10 gigabytes of virtual space when linking such a .so if
    # all objects have been built with debug information.)
    case $build_os in
    linux-gnu*)
        android_HOST_TAG=linux-x86_64
        ;;
    darwin*)
        android_HOST_TAG=darwin-x86_64
        ;;
    *)
        AC_MSG_ERROR([We only support building for Android from Linux or macOS])
        # ndk would also support windows and windows-x86_64
        ;;
    esac
    android_TOOLCHAIN=$ANDROID_NDK_HOME/toolchains/llvm/prebuilt/$android_HOST_TAG
    ANDROID_COMPILER_BIN=$android_TOOLCHAIN/bin
    dnl TODO: NSS build uses it...
    ANDROID_BINUTILS_PREBUILT_ROOT=$ANDROID_NDK_HOME/toolchains/$android_platform_prefix-$ANDROID_GCC_TOOLCHAIN_VERSION/prebuilt/$android_HOST_TAG
    AC_SUBST(ANDROID_BINUTILS_PREBUILT_ROOT)

    test -z "$AR" && AR=$ANDROID_COMPILER_BIN/$android_gnu_prefix-ar
    test -z "$NM" && NM=$ANDROID_COMPILER_BIN/$android_gnu_prefix-nm
    test -z "$OBJDUMP" && OBJDUMP=$ANDROID_COMPILER_BIN/$android_gnu_prefix-objdump
    test -z "$RANLIB" && RANLIB=$ANDROID_COMPILER_BIN/$android_gnu_prefix-ranlib
    test -z "$STRIP" && STRIP=$ANDROID_COMPILER_BIN/$android_gnu_prefix-strip

    ANDROIDCFLAGS="$ANDROIDCFLAGS -target ${LLVM_TRIPLE}${ANDROID_API_LEVEL}"
    ANDROIDCFLAGS="$ANDROIDCFLAGS -no-canonical-prefixes -ffunction-sections -fdata-sections -Qunused-arguments"
    if test "$ENABLE_LTO" = TRUE; then
        # -flto comes from com_GCC_defs.mk, too, but we need to make sure it gets passed as part of
        # $CC and $CXX when building external libraries
        ANDROIDCFLAGS="$ANDROIDCFLAGS -flto -fuse-linker-plugin -O2"
    fi

    ANDROIDCXXFLAGS="$ANDROIDCFLAGS -stdlib=libc++"

    if test -z "$CC"; then
        CC="$ANDROID_COMPILER_BIN/clang $ANDROIDCFLAGS"
        CC_BASE="clang"
    fi
    if test -z "$CXX"; then
        CXX="$ANDROID_COMPILER_BIN/clang++ $ANDROIDCXXFLAGS"
        CXX_BASE="clang++"
    fi
fi
AC_SUBST(ANDROID_NDK_HOME)
AC_SUBST(ANDROID_APP_ABI)
AC_SUBST(ANDROID_GCC_TOOLCHAIN_VERSION)

dnl ===================================================================
dnl --with-android-sdk
dnl ===================================================================
ANDROID_SDK_HOME=
if test -z "$with_android_sdk" -a -e "$SRC_ROOT/external/android-sdk-linux" -a "$build" != "$host"; then
    with_android_sdk="$SRC_ROOT/external/android-sdk-linux"
fi
if test -n "$with_android_sdk"; then
    eval ANDROID_SDK_HOME=$with_android_sdk
    PATH="$ANDROID_SDK_HOME/platform-tools:$ANDROID_SDK_HOME/tools:$PATH"
fi
AC_SUBST(ANDROID_SDK_HOME)

AC_ARG_ENABLE([android-lok],
    AS_HELP_STRING([--enable-android-lok],
        [The Android app from the android/ subdir needs several tweaks all
         over the place that break the LOK when used in the Online-based
         Android app.  This switch indicates that the intent of this build is
         actually the Online-based, non-modified LOK.])
)
ENABLE_ANDROID_LOK=
if test -n "$ANDROID_NDK_HOME" ; then
    if test "$enable_android_lok" = yes; then
        ENABLE_ANDROID_LOK=TRUE
        AC_DEFINE(HAVE_FEATURE_ANDROID_LOK)
        AC_MSG_NOTICE([building the Android version... for the Online-based Android app])
    else
        AC_MSG_NOTICE([building the Android version... for the app from the android/ subdir])
    fi
fi
AC_SUBST([ENABLE_ANDROID_LOK])

libo_FUZZ_ARG_ENABLE([android-editing],
    AS_HELP_STRING([--enable-android-editing],
        [Enable the experimental editing feature on Android.])
)
ENABLE_ANDROID_EDITING=
if test "$enable_android_editing" = yes; then
    ENABLE_ANDROID_EDITING=TRUE
fi
AC_SUBST([ENABLE_ANDROID_EDITING])

disable_database_connectivity_dependencies()
{
    enable_evolution2=no
    enable_firebird_sdbc=no
    enable_mariadb_sdbc=no
    enable_postgresql_sdbc=no
    enable_report_builder=no
}

# ===================================================================
#
# Start initial platform setup
#
# The using_* variables reflect platform support and should not be
# changed after the "End initial platform setup" block.
# This is also true for most test_* variables.
# ===================================================================
build_crypto=yes
test_cmis=yes
test_gdb_index=no
test_openldap=yes
test_split_debug=no
test_webdav=yes

# There is currently just iOS not using salplug, so this explicitly enables it.
# must: using_freetype_fontconfig
#  may: using_headless_plugin defaults to $using_freetype_fontconfig
using_vclplug=yes
# must: using_x11

# Default values, as such probably valid just for Linux, set
# differently below just for Mac OSX, but at least better than
# hardcoding these as we used to do. Much of this is duplicated also
# in solenv for old build system and for gbuild, ideally we should
# perhaps define stuff like this only here in configure.ac?

LINKFLAGSSHL="-shared"
PICSWITCH="-fpic"
DLLPOST=".so"

LINKFLAGSNOUNDEFS="-Wl,-z,defs"

INSTROOTBASESUFFIX=
INSTROOTCONTENTSUFFIX=
SDKDIRNAME=sdk

HOST_PLATFORM="$host"

host_cpu_for_clang="$host_cpu"

case "$host_os" in

solaris*)
    using_freetype_fontconfig=yes
    using_x11=yes
    build_skia=yes
    _os=SunOS

    dnl ===========================================================
    dnl Check whether we're using Solaris 10 - SPARC or Intel.
    dnl ===========================================================
    AC_MSG_CHECKING([the Solaris operating system release])
    _os_release=`echo $host_os | $SED -e s/solaris2\.//`
    if test "$_os_release" -lt "10"; then
        AC_MSG_ERROR([use Solaris >= 10 to build LibreOffice])
    else
        AC_MSG_RESULT([ok ($_os_release)])
    fi

    dnl Check whether we're using a SPARC or i386 processor
    AC_MSG_CHECKING([the processor type])
    if test "$host_cpu" = "sparc" -o "$host_cpu" = "i386"; then
        AC_MSG_RESULT([ok ($host_cpu)])
    else
        AC_MSG_ERROR([only SPARC and i386 processors are supported])
    fi
    ;;

linux-gnu*|k*bsd*-gnu*|linux-musl*)
    using_freetype_fontconfig=yes
    using_x11=yes
    build_skia=yes
    test_gdb_index=yes
    test_split_debug=yes
    if test "$enable_fuzzers" = yes; then
        test_system_freetype=no
    fi
    _os=Linux
    ;;

gnu)
    using_freetype_fontconfig=yes
    using_x11=no
    _os=GNU
     ;;

cygwin*|wsl*)
    # When building on Windows normally with MSVC under Cygwin,
    # configure thinks that the host platform (the platform the
    # built code will run on) is Cygwin, even if it obviously is
    # Windows, which in Autoconf terminology is called
    # "mingw32". (Which is misleading as MinGW is the name of the
    # tool-chain, not an operating system.)

    # Somewhat confusing, yes. But this configure script doesn't
    # look at $host etc that much, it mostly uses its own $_os
    # variable, set here in this case statement.

    using_freetype_fontconfig=no
    using_x11=no
    test_openldap=no
    build_skia=yes
    _os=WINNT

    DLLPOST=".dll"
    LINKFLAGSNOUNDEFS=

    if test "$host_cpu" = "aarch64"; then
        build_skia=no
        enable_gpgmepp=no
        enable_coinmp=no
        enable_firebird_sdbc=no
    fi
    ;;

darwin*|macos*) # macOS
    using_freetype_fontconfig=no
    using_x11=no
    build_skia=yes
    if test -n "$LODE_HOME" ; then
        mac_sanitize_path
        AC_MSG_NOTICE([sanitized the PATH to $PATH])
    fi
    _os=Darwin
    INSTROOTBASESUFFIX=/$PRODUCTNAME_WITHOUT_SPACES.app
    INSTROOTCONTENTSUFFIX=/Contents
    SDKDIRNAME=${PRODUCTNAME_WITHOUT_SPACES}${PRODUCTVERSION}_SDK
    # See comment above the case "$host_os"
    LINKFLAGSSHL="-dynamiclib -single_module"

    # -fPIC is default
    PICSWITCH=""

    DLLPOST=".dylib"

    # -undefined error is the default
    LINKFLAGSNOUNDEFS=""
    case "$host_cpu" in
    aarch64|arm64)
        case "$host_os" in
        macos*)
            # HOST_PLATFORM is used for external projects and their configury occasionally doesn't like
            # the "macos" part so be sure to use aarch64-apple-darwin for now.
            HOST_PLATFORM=aarch64-apple-darwin
            ;;
        esac

        # Apple's Clang uses "arm64"
        host_cpu_for_clang=arm64
    esac
;;

ios*) # iOS
    using_freetype_fontconfig=no
    using_vclplug=no
    using_x11=no
    build_crypto=no
    test_cmis=no
    test_openldap=no
    test_webdav=no
    if test -n "$LODE_HOME" ; then
        mac_sanitize_path
        AC_MSG_NOTICE([sanitized the PATH to $PATH])
    fi
    enable_gpgmepp=no
    _os=iOS
    enable_mpl_subset=yes
    enable_lotuswordpro=no
    disable_database_connectivity_dependencies
    enable_coinmp=no
    enable_lpsolve=no
    enable_extension_integration=no
    enable_scripting=no
    enable_xmlhelp=no
    with_ppds=no
    if test "$enable_ios_simulator" = "yes"; then
        host=x86_64-apple-darwin
    fi
    # See comment above the case "$host_os"
    LINKFLAGSSHL="-dynamiclib -single_module"

    # -fPIC is default
    PICSWITCH=""

    DLLPOST=".dylib"

    # -undefined error is the default
    LINKFLAGSNOUNDEFS=""

    # HOST_PLATFORM is used for external projects and their configury typically doesn't like the "ios"
    # part, so use aarch64-apple-darwin for now.
    HOST_PLATFORM=aarch64-apple-darwin

    # Apple's Clang uses "arm64"
    host_cpu_for_clang=arm64
;;

freebsd*)
    using_freetype_fontconfig=yes
    using_x11=yes
    build_skia=yes
    AC_MSG_CHECKING([the FreeBSD operating system release])
    if test -n "$with_os_version"; then
        OSVERSION="$with_os_version"
    else
        OSVERSION=`/sbin/sysctl -n kern.osreldate`
    fi
    AC_MSG_RESULT([found OSVERSION=$OSVERSION])
    AC_MSG_CHECKING([which thread library to use])
    if test "$OSVERSION" -lt "500016"; then
        PTHREAD_CFLAGS="-D_THREAD_SAFE"
        PTHREAD_LIBS="-pthread"
    elif test "$OSVERSION" -lt "502102"; then
        PTHREAD_CFLAGS="-D_THREAD_SAFE"
        PTHREAD_LIBS="-lc_r"
    else
        PTHREAD_CFLAGS=""
        PTHREAD_LIBS="-pthread"
    fi
    AC_MSG_RESULT([$PTHREAD_LIBS])
    _os=FreeBSD
    ;;

*netbsd*)
    using_freetype_fontconfig=yes
    using_x11=yes
    test_gtk3_kde5=no
    build_skia=yes
    PTHREAD_LIBS="-pthread -lpthread"
    _os=NetBSD
    ;;

aix*)
    using_freetype_fontconfig=yes
    using_x11=yes
    test_randr=no
    test_gstreamer_1_0=no
    PTHREAD_LIBS=-pthread
    _os=AIX
    ;;

openbsd*)
    using_freetype_fontconfig=yes
    using_x11=yes
    PTHREAD_CFLAGS="-D_THREAD_SAFE"
    PTHREAD_LIBS="-pthread"
    _os=OpenBSD
    ;;

dragonfly*)
    using_freetype_fontconfig=yes
    using_x11=yes
    build_skia=yes
    PTHREAD_LIBS="-pthread"
    _os=DragonFly
    ;;

linux-android*)
    using_freetype_fontconfig=yes
    using_headless_plugin=no
    using_x11=no
    build_crypto=no
    test_openldap=no
    test_system_freetype=no
    test_webdav=no
    disable_database_connectivity_dependencies
    enable_lotuswordpro=no
    enable_mpl_subset=yes
    enable_cairo_canvas=no
    enable_coinmp=yes
    enable_lpsolve=no
    enable_odk=no
    enable_python=no
    enable_xmlhelp=no
    _os=Android

    AC_DEFINE(HAVE_FT_FACE_GETCHARVARIANTINDEX)
    ;;

haiku*)
    using_freetype_fontconfig=yes
    using_x11=no
    test_gtk3_kde5=no
    test_kf5=yes
    enable_odk=no
    enable_coinmp=no
    enable_pdfium=no
    enable_sdremote=no
    enable_postgresql_sdbc=no
    enable_firebird_sdbc=no
    _os=Haiku
    ;;

emscripten)
    using_freetype_fontconfig=yes
    using_x11=no
    test_openldap=no
    enable_compiler_plugins=no
    test_cmis=no
    test_webdav=no
    enable_database_connectivity=no
    enable_lpsolve=no
    enable_scripting=no
    enable_xmlhelp=no
    with_system_zlib=no
    with_theme="breeze"
    _os=Emscripten
    ;;

*)
    AC_MSG_ERROR([$host_os operating system is not suitable to build LibreOffice for!])
    ;;
esac

AC_SUBST(HOST_PLATFORM)

if test -z "$using_x11" -o -z "$using_freetype_fontconfig"; then
    AC_MSG_ERROR([You must set \$using_freetype_fontconfig and \$using_x11 for your platform])
fi

# Set defaults, if not set by platform
test "${test_cups+set}" = set || test_cups="$using_x11"
test "${test_dbus+set}" = set || test_dbus="$using_x11"
test "${test_gstreamer_1_0+set}" = set || test_gstreamer_1_0="$using_x11"
test "${test_gtk3+set}" = set || test_gtk3="$using_x11"
test "${test_gtk4+set}" = set || test_gtk4="$using_x11"
test "${test_kf5+set}" = set || test_kf5="$using_x11"
# don't handle test_qt5, so it can disable test_kf5 later
test "${test_qt6+set}" = set || test_qt6="$using_x11"
test "${test_randr+set}" = set || test_randr="$using_x11"
test "${test_xrender+set}" = set || test_xrender="$using_x11"
test "${using_headless_plugin+set}" = set || using_headless_plugin="$using_freetype_fontconfig"

test "${test_gtk3_kde5+set}" != set -a "$test_kf5" = yes -a "$test_gtk3" = yes && test_gtk3_kde5="yes"
test "${test_system_fontconfig+set}" != set -a "${test_system_freetype+set}" = set && test_system_fontconfig="$test_system_freetype"
test "${test_system_freetype+set}" != set -a "${test_system_fontconfig+set}" = set && test_system_freetype="$test_system_fontconfig"

# convenience / platform overriding "fixes"
# Don't sort!
test "$test_kf5" = yes -a "$test_qt5" = no && test_kf5=no
test "$test_kf5" = yes && test_qt5=yes
test "$test_gtk3" != yes -o "$test_kf5" != yes && test_gtk3_kde5=no
test "$using_freetype_fontconfig" = no && using_headless_plugin=no
test "$using_freetype_fontconfig" = yes && test_cairo=yes

# Keep in sync with the above $using_x11 depending test default list
disable_x11_tests()
{
    test_cups=no
    test_dbus=no
    test_gstreamer_1_0=no
    test_gtk3_kde5=no
    test_gtk3=no
    test_gtk4=no
    test_kf5=no
    test_qt5=no
    test_qt6=no
    test_randr=no
    test_xrender=no
}

test "$using_x11" = yes && USING_X11=TRUE

if test "$using_freetype_fontconfig" = yes; then
    USE_HEADLESS_CODE=TRUE
    if test "$using_headless_plugin" = yes; then
        AC_DEFINE(ENABLE_HEADLESS)
        ENABLE_HEADLESS=TRUE
    fi
fi

AC_SUBST(ENABLE_HEADLESS)
AC_SUBST(USE_HEADLESS_CODE)

AC_MSG_NOTICE([VCL platform uses freetype+fontconfig: $using_freetype_fontconfig])
AC_MSG_NOTICE([VCL platform uses headless plugin: $using_headless_plugin])
AC_MSG_NOTICE([VCL platform uses vclplug: $using_vclplug])
AC_MSG_NOTICE([VCL platform uses X11: $using_x11])

# ===================================================================
#
# End initial platform setup
#
# ===================================================================

if test "$_os" = "Android" ; then
    # Verify that the NDK and SDK options are proper
    if test -z "$with_android_ndk"; then
        AC_MSG_ERROR([the --with-android-ndk option is mandatory, unless it is available at external/android-ndk/.])
    elif test ! -f "$ANDROID_NDK_HOME/meta/abis.json"; then
        AC_MSG_ERROR([the --with-android-ndk option does not point to an Android NDK])
    fi

    if test -z "$ANDROID_SDK_HOME"; then
        AC_MSG_ERROR([the --with-android-sdk option is mandatory, unless it is available at external/android-sdk-linux/.])
    elif test ! -d "$ANDROID_SDK_HOME/platforms"; then
        AC_MSG_ERROR([the --with-android-sdk option does not point to an Android SDK])
    fi

    BUILD_TOOLS_VERSION=`$SED -n -e 's/.*buildToolsVersion "\(.*\)"/\1/p' $SRC_ROOT/android/source/build.gradle`
    if test ! -d "$ANDROID_SDK_HOME/build-tools/$BUILD_TOOLS_VERSION"; then
        AC_MSG_WARN([android build-tools $BUILD_TOOLS_VERSION not found - install with
                         $ANDROID_SDK_HOME/tools/android update sdk -u --all --filter build-tools-$BUILD_TOOLS_VERSION
                    or adjust change $SRC_ROOT/android/source/build.gradle accordingly])
        add_warning "android build-tools $BUILD_TOOLS_VERSION not found - install with"
        add_warning "    $ANDROID_SDK_HOME/tools/android update sdk -u --all --filter build-tools-$BUILD_TOOLS_VERSION"
        add_warning "or adjust $SRC_ROOT/android/source/build.gradle accordingly"
    fi
    if test ! -f "$ANDROID_SDK_HOME/extras/android/m2repository/source.properties"; then
        AC_MSG_WARN([android support repository not found - install with
                         $ANDROID_SDK_HOME/tools/android update sdk -u --filter extra-android-m2repository
                     to allow the build to download the specified version of the android support libraries])
        add_warning "android support repository not found - install with"
        add_warning "    $ANDROID_SDK_HOME/tools/android update sdk -u --filter extra-android-m2repository"
        add_warning "to allow the build to download the specified version of the android support libraries"
    fi
fi

if test "$_os" = "AIX"; then
    AC_PATH_PROG(GAWK, gawk)
    if test -z "$GAWK"; then
        AC_MSG_ERROR([gawk not found in \$PATH])
    fi
fi

AC_SUBST(SDKDIRNAME)

AC_SUBST(PTHREAD_CFLAGS)
AC_SUBST(PTHREAD_LIBS)

# Check for explicit A/C/CXX/OBJC/OBJCXX/LDFLAGS.
# By default use the ones specified by our build system,
# but explicit override is possible.
AC_MSG_CHECKING(for explicit AFLAGS)
if test -n "$AFLAGS"; then
    AC_MSG_RESULT([$AFLAGS])
    x_AFLAGS=
else
    AC_MSG_RESULT(no)
    x_AFLAGS=[\#]
fi
AC_MSG_CHECKING(for explicit CFLAGS)
if test -n "$CFLAGS"; then
    AC_MSG_RESULT([$CFLAGS])
    x_CFLAGS=
else
    AC_MSG_RESULT(no)
    x_CFLAGS=[\#]
fi
AC_MSG_CHECKING(for explicit CXXFLAGS)
if test -n "$CXXFLAGS"; then
    AC_MSG_RESULT([$CXXFLAGS])
    x_CXXFLAGS=
else
    AC_MSG_RESULT(no)
    x_CXXFLAGS=[\#]
fi
AC_MSG_CHECKING(for explicit OBJCFLAGS)
if test -n "$OBJCFLAGS"; then
    AC_MSG_RESULT([$OBJCFLAGS])
    x_OBJCFLAGS=
else
    AC_MSG_RESULT(no)
    x_OBJCFLAGS=[\#]
fi
AC_MSG_CHECKING(for explicit OBJCXXFLAGS)
if test -n "$OBJCXXFLAGS"; then
    AC_MSG_RESULT([$OBJCXXFLAGS])
    x_OBJCXXFLAGS=
else
    AC_MSG_RESULT(no)
    x_OBJCXXFLAGS=[\#]
fi
AC_MSG_CHECKING(for explicit LDFLAGS)
if test -n "$LDFLAGS"; then
    AC_MSG_RESULT([$LDFLAGS])
    x_LDFLAGS=
else
    AC_MSG_RESULT(no)
    x_LDFLAGS=[\#]
fi
AC_SUBST(AFLAGS)
AC_SUBST(CFLAGS)
AC_SUBST(CXXFLAGS)
AC_SUBST(OBJCFLAGS)
AC_SUBST(OBJCXXFLAGS)
AC_SUBST(LDFLAGS)
AC_SUBST(x_AFLAGS)
AC_SUBST(x_CFLAGS)
AC_SUBST(x_CXXFLAGS)
AC_SUBST(x_OBJCFLAGS)
AC_SUBST(x_OBJCXXFLAGS)
AC_SUBST(x_LDFLAGS)

dnl These are potentially set for MSVC, in the code checking for UCRT below:
my_original_CFLAGS=$CFLAGS
my_original_CXXFLAGS=$CXXFLAGS
my_original_CPPFLAGS=$CPPFLAGS

dnl The following checks for gcc, cc and then cl (if it weren't guarded for win32)
dnl Needs to precede the AC_C_BIGENDIAN and AC_SEARCH_LIBS calls below, which apparently call
dnl AC_PROG_CC internally.
if test "$_os" != "WINNT"; then
    # AC_PROG_CC sets CFLAGS to -g -O2 if not set, avoid that
    save_CFLAGS=$CFLAGS
    AC_PROG_CC
    CFLAGS=$save_CFLAGS
    if test -z "$CC_BASE"; then
        CC_BASE=`first_arg_basename "$CC"`
    fi
fi

if test "$_os" != "WINNT"; then
    AC_C_BIGENDIAN([ENDIANNESS=big], [ENDIANNESS=little])
else
    ENDIANNESS=little
fi
AC_SUBST(ENDIANNESS)

if test $_os != "WINNT"; then
    save_LIBS="$LIBS"
    AC_SEARCH_LIBS([dlsym], [dl],
        [case "$ac_cv_search_dlsym" in -l*) DLOPEN_LIBS="$ac_cv_search_dlsym";; esac],
        [AC_MSG_ERROR([dlsym not found in either libc nor libdl])])
    LIBS="$save_LIBS"
fi
AC_SUBST(DLOPEN_LIBS)

dnl ===================================================================
dnl Sanity checks for Emscripten SDK setup
dnl ===================================================================

if test "$_os" = "Emscripten"; then
    EMSCRIPTEN_ERROR=0
    if ! which emconfigure >/dev/null 2>&1; then
        AC_MSG_WARN([emconfigure must be in your \$PATH])
        EMSCRIPTEN_ERROR=1
    fi
    if test -z "$EMMAKEN_JUST_CONFIGURE"; then
        AC_MSG_WARN(["\$EMMAKEN_JUST_CONFIGURE wasn't set by emconfigure. Prefix configure or use autogen.sh])
        EMSCRIPTEN_ERROR=1
    fi
    if test $EMSCRIPTEN_ERROR -ne 0; then
        AC_MSG_ERROR(["Please fix your EMSDK setup to build with Emscripten!"])
    fi
fi

###############################################################################
# Extensions switches --enable/--disable
###############################################################################
# By default these should be enabled unless having extra dependencies.
# If there is extra dependency over configure options then the enable should
# be automagic based on whether the requiring feature is enabled or not.
# All this options change anything only with --enable-extension-integration.

# The name of this option and its help string makes it sound as if
# extensions are built anyway, just not integrated in the installer,
# if you use --disable-extension-integration. Is that really the
# case?

AC_ARG_ENABLE(ios-simulator,
    AS_HELP_STRING([--enable-ios-simulator],
        [build for iOS simulator])
)

libo_FUZZ_ARG_ENABLE(extension-integration,
    AS_HELP_STRING([--disable-extension-integration],
        [Disable integration of the built extensions in the installer of the
         product. Use this switch to disable the integration.])
)

AC_ARG_ENABLE(avmedia,
    AS_HELP_STRING([--disable-avmedia],
        [Disable displaying and inserting AV media in documents. Work in progress, use only if you are hacking on it.]),
,test "${enable_avmedia+set}" = set || enable_avmedia=yes)

AC_ARG_ENABLE(database-connectivity,
    AS_HELP_STRING([--disable-database-connectivity],
        [Disable various database connectivity. Work in progress, use only if you are hacking on it.])
)

# This doesn't mean not building (or "integrating") extensions
# (although it probably should; i.e. it should imply
# --disable-extension-integration I guess), it means not supporting
# any extension mechanism at all
libo_FUZZ_ARG_ENABLE(extensions,
    AS_HELP_STRING([--disable-extensions],
        [Disable all add-on extension functionality. Work in progress, use only if you are hacking on it.])
)

AC_ARG_ENABLE(scripting,
    AS_HELP_STRING([--disable-scripting],
        [Disable BASIC, Java and Python. Work in progress, use only if you are hacking on it.]),
,test "${enable_scripting+set}" = set || enable_scripting=yes)

# This is mainly for Android and iOS, but could potentially be used in some
# special case otherwise, too, so factored out as a separate setting

AC_ARG_ENABLE(dynamic-loading,
    AS_HELP_STRING([--disable-dynamic-loading],
        [Disable any use of dynamic loading of code. Work in progress, use only if you are hacking on it.])
)

libo_FUZZ_ARG_ENABLE(report-builder,
    AS_HELP_STRING([--disable-report-builder],
        [Disable the Report Builder.])
)

libo_FUZZ_ARG_ENABLE(ext-wiki-publisher,
    AS_HELP_STRING([--enable-ext-wiki-publisher],
        [Enable the Wiki Publisher extension.])
)

libo_FUZZ_ARG_ENABLE(lpsolve,
    AS_HELP_STRING([--disable-lpsolve],
        [Disable compilation of the lp solve solver ])
)
libo_FUZZ_ARG_ENABLE(coinmp,
    AS_HELP_STRING([--disable-coinmp],
        [Disable compilation of the CoinMP solver ])
)

libo_FUZZ_ARG_ENABLE(pdfimport,
    AS_HELP_STRING([--disable-pdfimport],
        [Disable building the PDF import feature.])
)

libo_FUZZ_ARG_ENABLE(pdfium,
    AS_HELP_STRING([--disable-pdfium],
        [Disable building PDFium. Results in unsecure PDF signature verification.])
)

libo_FUZZ_ARG_ENABLE(skia,
    AS_HELP_STRING([--disable-skia],
        [Disable building Skia. Use --enable-skia=debug to build without optimizations.])
)

###############################################################################

dnl ---------- *** ----------

libo_FUZZ_ARG_ENABLE(mergelibs,
    AS_HELP_STRING([--enable-mergelibs],
        [Merge several of the smaller libraries into one big, "merged", one.])
)

libo_FUZZ_ARG_ENABLE(breakpad,
    AS_HELP_STRING([--enable-breakpad],
        [Enables breakpad for crash reporting.])
)

libo_FUZZ_ARG_ENABLE(crashdump,
    AS_HELP_STRING([--disable-crashdump],
        [Disable dump.ini and dump-file, when --enable-breakpad])
)

AC_ARG_ENABLE(fetch-external,
    AS_HELP_STRING([--disable-fetch-external],
        [Disables fetching external tarballs from web sources.])
)

AC_ARG_ENABLE(fuzzers,
    AS_HELP_STRING([--enable-fuzzers],
        [Enables building libfuzzer targets for fuzz testing.])
)

libo_FUZZ_ARG_ENABLE(pch,
    AS_HELP_STRING([--enable-pch=<yes/no/system/base/normal/full>],
        [Enables precompiled header support for C++. Forced default on Windows/VC build.
         Using 'system' will include only external headers, 'base' will add also headers
         from base modules, 'normal' will also add all headers except from the module built,
         'full' will use all suitable headers even from a module itself.])
)

libo_FUZZ_ARG_ENABLE(epm,
    AS_HELP_STRING([--enable-epm],
        [LibreOffice includes self-packaging code, that requires epm, however epm is
         useless for large scale package building.])
)

libo_FUZZ_ARG_ENABLE(odk,
    AS_HELP_STRING([--enable-odk],
        [Enable building the Office Development Kit, the part that extensions need to build against])
)

AC_ARG_ENABLE(mpl-subset,
    AS_HELP_STRING([--enable-mpl-subset],
        [Don't compile any pieces which are not MPL or more liberally licensed])
)

libo_FUZZ_ARG_ENABLE(evolution2,
    AS_HELP_STRING([--enable-evolution2],
        [Allows the built-in evolution 2 addressbook connectivity build to be
         enabled.])
)

AC_ARG_ENABLE(avahi,
    AS_HELP_STRING([--enable-avahi],
        [Determines whether to use Avahi to advertise Impress to remote controls.])
)

libo_FUZZ_ARG_ENABLE(werror,
    AS_HELP_STRING([--enable-werror],
        [Turn warnings to errors. (Has no effect in modules where the treating
         of warnings as errors is disabled explicitly.)]),
,)

libo_FUZZ_ARG_ENABLE(assert-always-abort,
    AS_HELP_STRING([--enable-assert-always-abort],
        [make assert() failures abort even when building without --enable-debug or --enable-dbgutil.]),
,)

libo_FUZZ_ARG_ENABLE(dbgutil,
    AS_HELP_STRING([--enable-dbgutil],
        [Provide debugging support from --enable-debug and include additional debugging
         utilities such as object counting or more expensive checks.
         This is the recommended option for developers.
         Note that this makes the build ABI incompatible, it is not possible to mix object
         files or libraries from a --enable-dbgutil and a --disable-dbgutil build.]))

libo_FUZZ_ARG_ENABLE(debug,
    AS_HELP_STRING([--enable-debug],
        [Include debugging information, disable compiler optimization and inlining plus
         extra debugging code like assertions. Extra large build! (enables -g compiler flag).]))

libo_FUZZ_ARG_ENABLE(split-debug,
    AS_HELP_STRING([--disable-split-debug],
        [Disable using split debug information (-gsplit-dwarf compile flag). Split debug information
         saves disk space and build time, but requires tools that support it (both build tools and debuggers).]))

libo_FUZZ_ARG_ENABLE(gdb-index,
    AS_HELP_STRING([--disable-gdb-index],
        [Disables creating debug information in the gdb index format, which makes gdb start faster.
         The feature requires the gold or lld linker.]))

libo_FUZZ_ARG_ENABLE(sal-log,
    AS_HELP_STRING([--enable-sal-log],
        [Make SAL_INFO and SAL_WARN calls do something even in a non-debug build.]))

libo_FUZZ_ARG_ENABLE(symbols,
    AS_HELP_STRING([--enable-symbols],
        [Generate debug information.
         By default, enabled for --enable-debug and --enable-dbgutil, disabled
         otherwise. It is possible to explicitly specify gbuild build targets
         (where 'all' means everything, '-' prepended means to not enable, '/' appended means
         everything in the directory; there is no ordering, more specific overrides
         more general, and disabling takes precedence).
         Example: --enable-symbols="all -sw/ -Library_sc".]))

libo_FUZZ_ARG_ENABLE(optimized,
    AS_HELP_STRING([--enable-optimized=<yes/no/debug>],
        [Whether to compile with optimization flags.
         By default, disabled for --enable-debug and --enable-dbgutil, enabled
         otherwise. Using 'debug' will try to use only optimizations that should
         not interfere with debugging. For Emscripten we default to optimized (-O1)
         debug build, as otherwise binaries become too large.]))

libo_FUZZ_ARG_ENABLE(runtime-optimizations,
    AS_HELP_STRING([--disable-runtime-optimizations],
        [Statically disable certain runtime optimizations (like rtl/alloc.h or
         JVM JIT) that are known to interact badly with certain dynamic analysis
         tools (like -fsanitize=address or Valgrind).  By default, disabled iff
         CC contains "-fsanitize=*".  (For Valgrind, those runtime optimizations
         are typically disabled dynamically via RUNNING_ON_VALGRIND.)]))

AC_ARG_WITH(valgrind,
    AS_HELP_STRING([--with-valgrind],
        [Make availability of Valgrind headers a hard requirement.]))

libo_FUZZ_ARG_ENABLE(compiler-plugins,
    AS_HELP_STRING([--enable-compiler-plugins],
        [Enable compiler plugins that will perform additional checks during
         building. Enabled automatically by --enable-dbgutil.
         Use --enable-compiler-plugins=debug to also enable debug code in the plugins.]))
COMPILER_PLUGINS_DEBUG=
if test "$enable_compiler_plugins" = debug; then
    enable_compiler_plugins=yes
    COMPILER_PLUGINS_DEBUG=TRUE
fi

libo_FUZZ_ARG_ENABLE(compiler-plugins-analyzer-pch,
    AS_HELP_STRING([--disable-compiler-plugins-analyzer-pch],
        [Disable use of precompiled headers when running the Clang compiler plugin analyzer.  Not
         relevant in the --disable-compiler-plugins case.]))

libo_FUZZ_ARG_ENABLE(ooenv,
    AS_HELP_STRING([--enable-ooenv],
        [Enable ooenv for the instdir installation.]))

AC_ARG_ENABLE(lto,
    AS_HELP_STRING([--enable-lto],
        [Enable link-time optimization. Suitable for (optimised) product builds. Building might take
         longer but libraries and executables are optimized for speed. For GCC, best to use the 'gold'
         linker.)]))

AC_ARG_ENABLE(python,
    AS_HELP_STRING([--enable-python=<no/auto/system/internal/fully-internal>],
        [Enables or disables Python support at run-time.
         Also specifies what Python to use at build-time.
         'fully-internal' even forces the internal version for uses of Python
         during the build.
         On macOS the only choices are
         'internal' (default) or 'fully-internal'. Otherwise the default is 'auto'.
         ]))

libo_FUZZ_ARG_ENABLE(gtk3,
    AS_HELP_STRING([--disable-gtk3],
        [Determines whether to use Gtk+ 3.0 vclplug on platforms where Gtk+ 3.0 is available.]),
,test "${enable_gtk3+set}" = set || enable_gtk3=yes)

AC_ARG_ENABLE(gtk4,
    AS_HELP_STRING([--enable-gtk4],
        [Determines whether to use Gtk+ 4.0 vclplug on platforms where Gtk+ 4.0 is available.]))

AC_ARG_ENABLE(introspection,
    AS_HELP_STRING([--enable-introspection],
        [Generate files for GObject introspection.  Requires --enable-gtk3.  (Typically used by
         Linux distributions.)]))

AC_ARG_ENABLE(split-app-modules,
    AS_HELP_STRING([--enable-split-app-modules],
        [Split file lists for app modules, e.g. base, calc.
         Has effect only with make distro-pack-install]),
,)

AC_ARG_ENABLE(split-opt-features,
    AS_HELP_STRING([--enable-split-opt-features],
        [Split file lists for some optional features, e.g. pyuno, testtool.
         Has effect only with make distro-pack-install]),
,)

libo_FUZZ_ARG_ENABLE(cairo-canvas,
    AS_HELP_STRING([--disable-cairo-canvas],
        [Determines whether to build the Cairo canvas on platforms where Cairo is available.]),
,)

libo_FUZZ_ARG_ENABLE(dbus,
    AS_HELP_STRING([--disable-dbus],
        [Determines whether to enable features that depend on dbus.
         e.g. Presentation mode screensaver control, bluetooth presentation control, automatic font install]),
,test "${enable_dbus+set}" = set || enable_dbus=yes)

libo_FUZZ_ARG_ENABLE(sdremote,
    AS_HELP_STRING([--disable-sdremote],
        [Determines whether to enable Impress remote control (i.e. the server component).]),
,test "${enable_sdremote+set}" = set || enable_sdremote=yes)

libo_FUZZ_ARG_ENABLE(sdremote-bluetooth,
    AS_HELP_STRING([--disable-sdremote-bluetooth],
        [Determines whether to build sdremote with bluetooth support.
         Requires dbus on Linux.]))

libo_FUZZ_ARG_ENABLE(gio,
    AS_HELP_STRING([--disable-gio],
        [Determines whether to use the GIO support.]),
,test "${enable_gio+set}" = set || enable_gio=yes)

AC_ARG_ENABLE(qt5,
    AS_HELP_STRING([--enable-qt5],
        [Determines whether to use Qt5 vclplug on platforms where Qt5 is
         available.]),
,)

AC_ARG_ENABLE(qt6,
    AS_HELP_STRING([--enable-qt6],
        [Determines whether to use Qt6 vclplug on platforms where Qt6 is
         available.]),
,)

AC_ARG_ENABLE(kf5,
    AS_HELP_STRING([--enable-kf5],
        [Determines whether to use Qt5/KF5 vclplug on platforms where Qt5 and
         KF5 are available.]),
,)

AC_ARG_ENABLE(gtk3_kde5,
    AS_HELP_STRING([--enable-gtk3-kde5],
        [Determines whether to use Gtk3 vclplug with KF5 file dialogs on
         platforms where Gtk3, Qt5 and Plasma is available.]),
,)

AC_ARG_ENABLE(gui,
    AS_HELP_STRING([--disable-gui],
        [Disable use of X11 or Wayland to reduce dependencies (e.g. for building LibreOfficeKit).]),
,enable_gui=yes)

libo_FUZZ_ARG_ENABLE(randr,
    AS_HELP_STRING([--disable-randr],
        [Disable RandR support in the vcl project.]),
,test "${enable_randr+set}" = set || enable_randr=yes)

libo_FUZZ_ARG_ENABLE(gstreamer-1-0,
    AS_HELP_STRING([--disable-gstreamer-1-0],
        [Disable building with the gstreamer 1.0 avmedia backend.]),
,test "${enable_gstreamer_1_0+set}" = set || enable_gstreamer_1_0=yes)

libo_FUZZ_ARG_ENABLE([eot],
    [AS_HELP_STRING([--enable-eot],
        [Enable support for Embedded OpenType fonts.])],
,test "${enable_eot+set}" = set || enable_eot=no)

libo_FUZZ_ARG_ENABLE(cve-tests,
    AS_HELP_STRING([--disable-cve-tests],
        [Prevent CVE tests to be executed]),
,)

libo_FUZZ_ARG_ENABLE(chart-tests,
    AS_HELP_STRING([--enable-chart-tests],
        [Executes chart XShape tests. In a perfect world these tests would be
         stable and everyone could run them, in reality it is best to run them
         only on a few machines that are known to work and maintained by people
         who can judge if a test failure is a regression or not.]),
,)

AC_ARG_ENABLE(build-opensymbol,
    AS_HELP_STRING([--enable-build-opensymbol],
        [Do not use the prebuilt opens___.ttf. Build it instead. This needs
         fontforge installed.]),
,)

AC_ARG_ENABLE(dependency-tracking,
    AS_HELP_STRING([--enable-dependency-tracking],
        [Do not reject slow dependency extractors.])[
  --disable-dependency-tracking
                          Disables generation of dependency information.
                          Speed up one-time builds.],
,)

AC_ARG_ENABLE(icecream,
    AS_HELP_STRING([--enable-icecream],
        [Use the 'icecream' distributed compiling tool to speedup the compilation.
         It defaults to /opt/icecream for the location of the icecream gcc/g++
         wrappers, you can override that using --with-gcc-home=/the/path switch.]),
,)

AC_ARG_ENABLE(ld,
    AS_HELP_STRING([--enable-ld=<linker>],
        [Use the specified linker. Both 'gold' and 'lld' linkers generally use less memory and link faster.
         By default tries to use the best linker possible, use --disable-ld to use the default linker.
         If <linker> contains any ':', the part before the first ':' is used as the value of
         -fuse-ld, while the part after the first ':' is used as the value of --ld-path (which is
         needed for Clang 12).]),
,)

libo_FUZZ_ARG_ENABLE(cups,
    AS_HELP_STRING([--disable-cups],
        [Do not build cups support.])
)

AC_ARG_ENABLE(ccache,
    AS_HELP_STRING([--disable-ccache],
        [Do not try to use ccache automatically.
         By default we will try to detect if ccache is available; in that case if
         CC/CXX are not yet set, and --enable-icecream is not given, we
         attempt to use ccache. --disable-ccache disables ccache completely.
         Additionally ccache's depend mode is enabled if possible,
         use --enable-ccache=nodepend to enable ccache without depend mode.
]),
,)

AC_ARG_ENABLE(z7-debug,
    AS_HELP_STRING([--enable-z7-debug],
        [Makes the MSVC compiler use -Z7 for debugging instead of the default -Zi. Using this option takes
         more disk spaces but allows to use ccache. Final PDB files are created even with this option enabled.
         Enabled by default if ccache is detected.]))

libo_FUZZ_ARG_ENABLE(online-update,
    AS_HELP_STRING([--enable-online-update],
        [Enable the online update service that will check for new versions of
         LibreOffice. Disabled by default. Requires --with-privacy-policy-url to be set.
         If the value is "mar", the experimental Mozilla-like update will be
         enabled instead of the traditional update mechanism.]),
,)

AC_ARG_WITH(update-config,
    AS_HELP_STRING([--with-update-config=/tmp/update.ini],
                   [Path to the update config ini file]))

libo_FUZZ_ARG_ENABLE(extension-update,
    AS_HELP_STRING([--disable-extension-update],
        [Disable possibility to update installed extensions.]),
,)

libo_FUZZ_ARG_ENABLE(release-build,
    AS_HELP_STRING([--enable-release-build],
        [Enable release build. Note that the "release build" choice is orthogonal to
         whether symbols are present, debug info is generated, or optimization
         is done.
         See http://wiki.documentfoundation.org/Development/DevBuild]),
,)

AC_ARG_ENABLE(windows-build-signing,
    AS_HELP_STRING([--enable-windows-build-signing],
        [Enable signing of windows binaries (*.exe, *.dll)]),
,)

AC_ARG_ENABLE(silent-msi,
    AS_HELP_STRING([--enable-silent-msi],
        [Enable MSI with LIMITUI=1 (silent install).]),
,)

AC_ARG_ENABLE(macosx-code-signing,
    AS_HELP_STRING([--enable-macosx-code-signing=<identity>],
        [Sign executables, dylibs, frameworks and the app bundle. If you
         don't provide an identity the first suitable certificate
         in your keychain is used.]),
,)

AC_ARG_ENABLE(macosx-package-signing,
    AS_HELP_STRING([--enable-macosx-package-signing=<identity>],
        [Create a .pkg suitable for uploading to the Mac App Store and sign
         it. If you don't provide an identity the first suitable certificate
         in your keychain is used.]),
,)

AC_ARG_ENABLE(macosx-sandbox,
    AS_HELP_STRING([--enable-macosx-sandbox],
        [Make the app bundle run in a sandbox. Requires code signing.
         Is required by apps distributed in the Mac App Store, and implies
         adherence to App Store rules.]),
,)

AC_ARG_WITH(macosx-bundle-identifier,
    AS_HELP_STRING([--with-macosx-bundle-identifier=tld.mumble.orifice.TheOffice],
        [Define the macOS bundle identifier. Default is the somewhat weird
         org.libreoffice.script ("script", huh?).]),
,with_macosx_bundle_identifier=org.libreoffice.script)

AC_ARG_WITH(product-name,
    AS_HELP_STRING([--with-product-name='My Own Office Suite'],
        [Define the product name. Default is AC_PACKAGE_NAME.]),
,with_product_name=$PRODUCTNAME)

libo_FUZZ_ARG_ENABLE(community-flavor,
    AS_HELP_STRING([--disable-community-flavor],
        [Disable the Community branding.]),
,)

AC_ARG_WITH(package-version,
    AS_HELP_STRING([--with-package-version='3.1.4.5'],
        [Define the package version. Default is AC_PACKAGE_VERSION. Use only if you distribute an own build for macOS.]),
,)

libo_FUZZ_ARG_ENABLE(readonly-installset,
    AS_HELP_STRING([--enable-readonly-installset],
        [Prevents any attempts by LibreOffice to write into its installation. That means
         at least that no "system-wide" extensions can be added. Partly experimental work in
         progress, probably not fully implemented. Always enabled for macOS.]),
,)

libo_FUZZ_ARG_ENABLE(mariadb-sdbc,
    AS_HELP_STRING([--disable-mariadb-sdbc],
        [Disable the build of the MariaDB/MySQL-SDBC driver.])
)

libo_FUZZ_ARG_ENABLE(postgresql-sdbc,
    AS_HELP_STRING([--disable-postgresql-sdbc],
        [Disable the build of the PostgreSQL-SDBC driver.])
)

libo_FUZZ_ARG_ENABLE(lotuswordpro,
    AS_HELP_STRING([--disable-lotuswordpro],
        [Disable the build of the Lotus Word Pro filter.]),
,test "${enable_lotuswordpro+set}" = set || enable_lotuswordpro=yes)

libo_FUZZ_ARG_ENABLE(firebird-sdbc,
    AS_HELP_STRING([--disable-firebird-sdbc],
        [Disable the build of the Firebird-SDBC driver if it doesn't compile for you.]),
,test "${enable_firebird_sdbc+set}" = set || enable_firebird_sdbc=yes)

AC_ARG_ENABLE(bogus-pkg-config,
    AS_HELP_STRING([--enable-bogus-pkg-config],
        [MACOSX only: on MacOSX pkg-config can cause trouble. by default if one is found in the PATH, an error is issued. This flag turn that error into a warning.]),
)

AC_ARG_ENABLE(openssl,
    AS_HELP_STRING([--disable-openssl],
        [Disable using libssl/libcrypto from OpenSSL. If disabled,
         components will either use GNUTLS or NSS. Work in progress,
         use only if you are hacking on it.]),
,enable_openssl=yes)

libo_FUZZ_ARG_ENABLE(cipher-openssl-backend,
    AS_HELP_STRING([--enable-cipher-openssl-backend],
        [Enable using OpenSSL as the actual implementation of the rtl/cipher.h functionality.
         Requires --enable-openssl.]))

AC_ARG_ENABLE(nss,
    AS_HELP_STRING([--disable-nss],
        [Disable using NSS. If disabled,
         components will either use GNUTLS or openssl. Work in progress,
         use only if you are hacking on it.]),
,enable_nss=yes)

AC_ARG_ENABLE(library-bin-tar,
    AS_HELP_STRING([--enable-library-bin-tar],
        [Enable the building and reused of tarball of binary build for some 'external' libraries.
        Some libraries can save their build result in a tarball
        stored in TARFILE_LOCATION. That binary tarball is
        uniquely identified by the source tarball,
        the content of the config_host.mk file and the content
        of the top-level directory in core for that library
        If this option is enabled, then if such a tarfile exist, it will be untarred
        instead of the source tarfile, and the build step will be skipped for that
        library.
        If a proper tarfile does not exist, then the normal source-based
        build is done for that library and a proper binary tarfile is created
        for the next time.]),
)

AC_ARG_ENABLE(dconf,
    AS_HELP_STRING([--disable-dconf],
        [Disable the dconf configuration backend (enabled by default where
         available).]))

libo_FUZZ_ARG_ENABLE(formula-logger,
    AS_HELP_STRING(
        [--enable-formula-logger],
        [Enable formula logger for logging formula calculation flow in Calc.]
    )
)

AC_ARG_ENABLE(ldap,
    AS_HELP_STRING([--disable-ldap],
        [Disable LDAP support.]),
,enable_ldap=yes)

AC_ARG_ENABLE(opencl,
    AS_HELP_STRING([--disable-opencl],
        [Disable OpenCL support.]),
,enable_opencl=yes)

libo_FUZZ_ARG_ENABLE(librelogo,
    AS_HELP_STRING([--disable-librelogo],
        [Do not build LibreLogo.]),
,enable_librelogo=yes)

AC_ARG_ENABLE(cmis,
    AS_HELP_STRING([--disable-cmis],
        [Disable CMIS support.]),
,enable_cmis=yes)

AC_ARG_ENABLE(curl,
    AS_HELP_STRING([--disable-curl],
        [Disable CURL support.]),
,enable_curl=yes)

AC_ARG_ENABLE(wasm-strip,
    AS_HELP_STRING([--enable-wasm-strip],
        [Strip the static build like for WASM/emscripten platform.]),
,enable_wasm_strip=yes)

AC_ARG_ENABLE(xmlhelp,
    AS_HELP_STRING([--disable-xmlhelp],
        [Disable XML help support]),
,enable_xmlhelp=yes)

AC_ARG_ENABLE(services-rdb-from-build,
    AS_HELP_STRING([--enable-services-rdb-from-build],
        [Automatically creates the services.rdb from all built components.
         Splitting the component files and adapting the Library_*.mk files
         is WIP and probably just works together with --enable-wasm-strip.]))


dnl ===================================================================
dnl Optional Packages (--with/without-)
dnl ===================================================================

AC_ARG_WITH(gcc-home,
    AS_HELP_STRING([--with-gcc-home],
        [Specify the location of gcc/g++ manually. This can be used in conjunction
         with --enable-icecream when icecream gcc/g++ wrappers are installed in a
         non-default path.]),
,)

AC_ARG_WITH(gnu-patch,
    AS_HELP_STRING([--with-gnu-patch],
        [Specify location of GNU patch on Solaris or FreeBSD.]),
,)

AC_ARG_WITH(build-platform-configure-options,
    AS_HELP_STRING([--with-build-platform-configure-options],
        [Specify options for the configure script run for the *build* platform in a cross-compilation]),
,)

AC_ARG_WITH(gnu-cp,
    AS_HELP_STRING([--with-gnu-cp],
        [Specify location of GNU cp on Solaris or FreeBSD.]),
,)

AC_ARG_WITH(external-tar,
    AS_HELP_STRING([--with-external-tar=<TARFILE_PATH>],
        [Specify an absolute path of where to find (and store) tarfiles.]),
    TARFILE_LOCATION=$withval ,
)

AC_ARG_WITH(referenced-git,
    AS_HELP_STRING([--with-referenced-git=<OTHER_CHECKOUT_DIR>],
        [Specify another checkout directory to reference. This makes use of
                 git submodule update --reference, and saves a lot of diskspace
                 when having multiple trees side-by-side.]),
    GIT_REFERENCE_SRC=$withval ,
)

AC_ARG_WITH(linked-git,
    AS_HELP_STRING([--with-linked-git=<submodules repo basedir>],
        [Specify a directory where the repositories of submodules are located.
         This uses a method similar to git-new-workdir to get submodules.]),
    GIT_LINK_SRC=$withval ,
)

AC_ARG_WITH(galleries,
    AS_HELP_STRING([--with-galleries],
        [Specify how galleries should be built. It is possible either to
         build these internally from source ("build"),
         or to disable them ("no")]),
)

AC_ARG_WITH(theme,
    AS_HELP_STRING([--with-theme="theme1 theme2..."],
        [Choose which themes to include. By default those themes with an '*' are included.
         Possible choices: *breeze, *breeze_dark, *breeze_dark_svg, *breeze_svg, *colibre, *colibre_svg, *elementary,
         *elementary_svg, *karasa_jaga, *karasa_jaga_svg, *sifr, *sifr_dark, *sifr_dark_svg, *sifr_svg, *sukapura, *sukapura_svg.]),
,)

libo_FUZZ_ARG_WITH(helppack-integration,
    AS_HELP_STRING([--without-helppack-integration],
        [It will not integrate the helppacks to the installer
         of the product. Please use this switch to use the online help
         or separate help packages.]),
,)

libo_FUZZ_ARG_WITH(fonts,
    AS_HELP_STRING([--without-fonts],
        [LibreOffice includes some third-party fonts to provide a reliable basis for
         help content, templates, samples, etc. When these fonts are already
         known to be available on the system then you should use this option.]),
,)

AC_ARG_WITH(epm,
    AS_HELP_STRING([--with-epm],
        [Decides which epm to use. Default is to use the one from the system if
         one is built. When either this is not there or you say =internal epm
         will be built.]),
,)

AC_ARG_WITH(package-format,
    AS_HELP_STRING([--with-package-format],
        [Specify package format(s) for LibreOffice installation sets. The
         implicit --without-package-format leads to no installation sets being
         generated. Possible values: aix, archive, bsd, deb, dmg,
         installed, msi, pkg, and rpm.
         Example: --with-package-format='deb rpm']),
,)

AC_ARG_WITH(tls,
    AS_HELP_STRING([--with-tls],
        [Decides which TLS/SSL and cryptographic implementations to use for
         LibreOffice's code. Notice that this doesn't apply for depending
         libraries like "neon", for example. Default is to use NSS
         although OpenSSL is also possible. Notice that selecting NSS restricts
         the usage of OpenSSL in LO's code but selecting OpenSSL doesn't
         restrict by now the usage of NSS in LO's code. Possible values:
         openssl, nss. Example: --with-tls="nss"]),
,)

AC_ARG_WITH(system-libs,
    AS_HELP_STRING([--with-system-libs],
        [Use libraries already on system -- enables all --with-system-* flags.]),
,)

AC_ARG_WITH(system-bzip2,
    AS_HELP_STRING([--with-system-bzip2],
        [Use bzip2 already on system. Used only when --enable-online-update=mar]),,
    [with_system_bzip2="$with_system_libs"])

AC_ARG_WITH(system-headers,
    AS_HELP_STRING([--with-system-headers],
        [Use headers already on system -- enables all --with-system-* flags for
         external packages whose headers are the only entities used i.e.
         boost/odbc/sane-header(s).]),,
    [with_system_headers="$with_system_libs"])

AC_ARG_WITH(system-jars,
    AS_HELP_STRING([--without-system-jars],
        [When building with --with-system-libs, also the needed jars are expected
         on the system. Use this to disable that]),,
    [with_system_jars="$with_system_libs"])

AC_ARG_WITH(system-cairo,
    AS_HELP_STRING([--with-system-cairo],
        [Use cairo libraries already on system.  Happens automatically for
         (implicit) --enable-gtk3.]))

AC_ARG_WITH(system-epoxy,
    AS_HELP_STRING([--with-system-epoxy],
        [Use epoxy libraries already on system.  Happens automatically for
         (implicit) --enable-gtk3.]),,
       [with_system_epoxy="$with_system_libs"])

AC_ARG_WITH(myspell-dicts,
    AS_HELP_STRING([--with-myspell-dicts],
        [Adds myspell dictionaries to the LibreOffice installation set]),
,)

AC_ARG_WITH(system-dicts,
    AS_HELP_STRING([--without-system-dicts],
        [Do not use dictionaries from system paths.]),
,)

AC_ARG_WITH(external-dict-dir,
    AS_HELP_STRING([--with-external-dict-dir],
        [Specify external dictionary dir.]),
,)

AC_ARG_WITH(external-hyph-dir,
    AS_HELP_STRING([--with-external-hyph-dir],
        [Specify external hyphenation pattern dir.]),
,)

AC_ARG_WITH(external-thes-dir,
    AS_HELP_STRING([--with-external-thes-dir],
        [Specify external thesaurus dir.]),
,)

AC_ARG_WITH(system-zlib,
    AS_HELP_STRING([--with-system-zlib],
        [Use zlib already on system.]),,
    [with_system_zlib=auto])

AC_ARG_WITH(system-jpeg,
    AS_HELP_STRING([--with-system-jpeg],
        [Use jpeg already on system.]),,
    [with_system_jpeg="$with_system_libs"])

AC_ARG_WITH(system-clucene,
    AS_HELP_STRING([--with-system-clucene],
        [Use clucene already on system.]),,
    [with_system_clucene="$with_system_libs"])

AC_ARG_WITH(system-expat,
    AS_HELP_STRING([--with-system-expat],
        [Use expat already on system.]),,
    [with_system_expat="$with_system_libs"])

AC_ARG_WITH(system-libxml,
    AS_HELP_STRING([--with-system-libxml],
        [Use libxml/libxslt already on system.]),,
    [with_system_libxml=auto])

AC_ARG_WITH(system-icu,
    AS_HELP_STRING([--with-system-icu],
        [Use icu already on system.]),,
    [with_system_icu="$with_system_libs"])

AC_ARG_WITH(system-ucpp,
    AS_HELP_STRING([--with-system-ucpp],
        [Use ucpp already on system.]),,
    [])

AC_ARG_WITH(system-openldap,
    AS_HELP_STRING([--with-system-openldap],
        [Use the OpenLDAP LDAP SDK already on system.]),,
    [with_system_openldap="$with_system_libs"])

libo_FUZZ_ARG_ENABLE(poppler,
    AS_HELP_STRING([--disable-poppler],
        [Disable building Poppler.])
)

AC_ARG_WITH(system-poppler,
    AS_HELP_STRING([--with-system-poppler],
        [Use system poppler (only needed for PDF import).]),,
    [with_system_poppler="$with_system_libs"])

AC_ARG_WITH(system-abseil,
    AS_HELP_STRING([--with-system-abseil],
        [Use the abseil libraries already on system.]),,
    [with_system_abseil="$with_system_libs"])

AC_ARG_WITH(system-openjpeg,
    AS_HELP_STRING([--with-system-openjpeg],
        [Use the OpenJPEG library already on system.]),,
    [with_system_openjpeg="$with_system_libs"])

libo_FUZZ_ARG_ENABLE(gpgmepp,
    AS_HELP_STRING([--disable-gpgmepp],
        [Disable building gpgmepp. Do not use in normal cases unless you want to fix potential problems it causes.])
)

AC_ARG_WITH(system-gpgmepp,
    AS_HELP_STRING([--with-system-gpgmepp],
        [Use gpgmepp already on system]),,
    [with_system_gpgmepp="$with_system_libs"])

AC_ARG_WITH(system-mariadb,
    AS_HELP_STRING([--with-system-mariadb],
        [Use MariaDB/MySQL libraries already on system.]),,
    [with_system_mariadb="$with_system_libs"])

AC_ARG_ENABLE(bundle-mariadb,
    AS_HELP_STRING([--enable-bundle-mariadb],
        [When using MariaDB/MySQL libraries already on system, bundle them with the MariaDB Connector/LibreOffice.])
)

AC_ARG_WITH(system-postgresql,
    AS_HELP_STRING([--with-system-postgresql],
        [Use PostgreSQL libraries already on system, for building the PostgreSQL-SDBC
         driver. If pg_config is not in PATH, use PGCONFIG to point to it.]),,
    [with_system_postgresql="$with_system_libs"])

AC_ARG_WITH(libpq-path,
    AS_HELP_STRING([--with-libpq-path=<absolute path to your libpq installation>],
        [Use this PostgreSQL C interface (libpq) installation for building
         the PostgreSQL-SDBC extension.]),
,)

AC_ARG_WITH(system-firebird,
    AS_HELP_STRING([--with-system-firebird],
        [Use Firebird libraries already on system, for building the Firebird-SDBC
         driver. If fb_config is not in PATH, use FBCONFIG to point to it.]),,
    [with_system_firebird="$with_system_libs"])

AC_ARG_WITH(system-libtommath,
            AS_HELP_STRING([--with-system-libtommath],
                           [Use libtommath already on system]),,
            [with_system_libtommath="$with_system_libs"])

AC_ARG_WITH(system-hsqldb,
    AS_HELP_STRING([--with-system-hsqldb],
        [Use hsqldb already on system.]))

AC_ARG_WITH(hsqldb-jar,
    AS_HELP_STRING([--with-hsqldb-jar=JARFILE],
        [Specify path to jarfile manually.]),
    HSQLDB_JAR=$withval)

libo_FUZZ_ARG_ENABLE(scripting-beanshell,
    AS_HELP_STRING([--disable-scripting-beanshell],
        [Disable support for scripts in BeanShell.]),
,
)

AC_ARG_WITH(system-beanshell,
    AS_HELP_STRING([--with-system-beanshell],
        [Use beanshell already on system.]),,
    [with_system_beanshell="$with_system_jars"])

AC_ARG_WITH(beanshell-jar,
    AS_HELP_STRING([--with-beanshell-jar=JARFILE],
        [Specify path to jarfile manually.]),
    BSH_JAR=$withval)

libo_FUZZ_ARG_ENABLE(scripting-javascript,
    AS_HELP_STRING([--disable-scripting-javascript],
        [Disable support for scripts in JavaScript.]),
,
)

AC_ARG_WITH(system-rhino,
    AS_HELP_STRING([--with-system-rhino],
        [Use rhino already on system.]),,)
#    [with_system_rhino="$with_system_jars"])
# Above is not used as we have different debug interface
# patched into internal rhino. This code needs to be fixed
# before we can enable it by default.

AC_ARG_WITH(rhino-jar,
    AS_HELP_STRING([--with-rhino-jar=JARFILE],
        [Specify path to jarfile manually.]),
    RHINO_JAR=$withval)

AC_ARG_WITH(system-jfreereport,
    AS_HELP_STRING([--with-system-jfreereport],
        [Use JFreeReport already on system.]),,
    [with_system_jfreereport="$with_system_jars"])

AC_ARG_WITH(sac-jar,
    AS_HELP_STRING([--with-sac-jar=JARFILE],
        [Specify path to jarfile manually.]),
    SAC_JAR=$withval)

AC_ARG_WITH(libxml-jar,
    AS_HELP_STRING([--with-libxml-jar=JARFILE],
        [Specify path to jarfile manually.]),
    LIBXML_JAR=$withval)

AC_ARG_WITH(flute-jar,
    AS_HELP_STRING([--with-flute-jar=JARFILE],
        [Specify path to jarfile manually.]),
    FLUTE_JAR=$withval)

AC_ARG_WITH(jfreereport-jar,
    AS_HELP_STRING([--with-jfreereport-jar=JARFILE],
        [Specify path to jarfile manually.]),
    JFREEREPORT_JAR=$withval)

AC_ARG_WITH(liblayout-jar,
    AS_HELP_STRING([--with-liblayout-jar=JARFILE],
        [Specify path to jarfile manually.]),
    LIBLAYOUT_JAR=$withval)

AC_ARG_WITH(libloader-jar,
    AS_HELP_STRING([--with-libloader-jar=JARFILE],
        [Specify path to jarfile manually.]),
    LIBLOADER_JAR=$withval)

AC_ARG_WITH(libformula-jar,
    AS_HELP_STRING([--with-libformula-jar=JARFILE],
        [Specify path to jarfile manually.]),
    LIBFORMULA_JAR=$withval)

AC_ARG_WITH(librepository-jar,
    AS_HELP_STRING([--with-librepository-jar=JARFILE],
        [Specify path to jarfile manually.]),
    LIBREPOSITORY_JAR=$withval)

AC_ARG_WITH(libfonts-jar,
    AS_HELP_STRING([--with-libfonts-jar=JARFILE],
        [Specify path to jarfile manually.]),
    LIBFONTS_JAR=$withval)

AC_ARG_WITH(libserializer-jar,
    AS_HELP_STRING([--with-libserializer-jar=JARFILE],
        [Specify path to jarfile manually.]),
    LIBSERIALIZER_JAR=$withval)

AC_ARG_WITH(libbase-jar,
    AS_HELP_STRING([--with-libbase-jar=JARFILE],
        [Specify path to jarfile manually.]),
    LIBBASE_JAR=$withval)

AC_ARG_WITH(system-odbc,
    AS_HELP_STRING([--with-system-odbc],
        [Use the odbc headers already on system.]),,
    [with_system_odbc="auto"])

AC_ARG_WITH(system-sane,
    AS_HELP_STRING([--with-system-sane],
        [Use sane.h already on system.]),,
    [with_system_sane="$with_system_headers"])

AC_ARG_WITH(system-bluez,
    AS_HELP_STRING([--with-system-bluez],
        [Use bluetooth.h already on system.]),,
    [with_system_bluez="$with_system_headers"])

AC_ARG_WITH(system-curl,
    AS_HELP_STRING([--with-system-curl],
        [Use curl already on system.]),,
    [with_system_curl=auto])

AC_ARG_WITH(system-boost,
    AS_HELP_STRING([--with-system-boost],
        [Use boost already on system.]),,
    [with_system_boost="$with_system_headers"])

AC_ARG_WITH(system-cuckoo,
    AS_HELP_STRING([--with-system-cuckoo],
        [Use libcuckoo already on system.]),,
    [with_system_cuckoo="$with_system_headers"])

AC_ARG_WITH(system-glm,
    AS_HELP_STRING([--with-system-glm],
        [Use glm already on system.]),,
    [with_system_glm="$with_system_headers"])

AC_ARG_WITH(system-hunspell,
    AS_HELP_STRING([--with-system-hunspell],
        [Use libhunspell already on system.]),,
    [with_system_hunspell="$with_system_libs"])

libo_FUZZ_ARG_ENABLE(zxing,
    AS_HELP_STRING([--disable-zxing],
       [Disable use of zxing external library.]))

AC_ARG_WITH(system-zxing,
    AS_HELP_STRING([--with-system-zxing],
        [Use libzxing already on system.]),,
    [with_system_zxing="$with_system_libs"])

AC_ARG_WITH(system-box2d,
    AS_HELP_STRING([--with-system-box2d],
        [Use box2d already on system.]),,
    [with_system_box2d="$with_system_libs"])

AC_ARG_WITH(system-mythes,
    AS_HELP_STRING([--with-system-mythes],
        [Use mythes already on system.]),,
    [with_system_mythes="$with_system_libs"])

AC_ARG_WITH(system-altlinuxhyph,
    AS_HELP_STRING([--with-system-altlinuxhyph],
        [Use ALTLinuxhyph already on system.]),,
    [with_system_altlinuxhyph="$with_system_libs"])

AC_ARG_WITH(system-lpsolve,
    AS_HELP_STRING([--with-system-lpsolve],
        [Use lpsolve already on system.]),,
    [with_system_lpsolve="$with_system_libs"])

AC_ARG_WITH(system-coinmp,
    AS_HELP_STRING([--with-system-coinmp],
        [Use CoinMP already on system.]),,
    [with_system_coinmp="$with_system_libs"])

AC_ARG_WITH(system-liblangtag,
    AS_HELP_STRING([--with-system-liblangtag],
        [Use liblangtag library already on system.]),,
    [with_system_liblangtag="$with_system_libs"])

AC_ARG_WITH(system-lockfile,
    AS_HELP_STRING([--with-system-lockfile[=file]],
        [Detect a system lockfile program or use the \$file argument.]))

AC_ARG_WITH(webdav,
    AS_HELP_STRING([--with-webdav],
        [Specify which library to use for webdav implementation.
         Possible values: "neon", "serf", "curl", "no". The default value is "neon".
         Example: --with-webdav="serf"]))

AC_ARG_WITH(linker-hash-style,
    AS_HELP_STRING([--with-linker-hash-style],
        [Use linker with --hash-style=<style> when linking shared objects.
         Possible values: "sysv", "gnu", "both". The default value is "gnu"
         if supported on the build system, and "sysv" otherwise.]))

AC_ARG_WITH(jdk-home,
    AS_HELP_STRING([--with-jdk-home=<absolute path to JDK home>],
        [If you have installed JDK 9 or later on your system please supply the
         path here. Note that this is not the location of the java command but the
         location of the entire distribution. In case of cross-compiling, this
         is the JDK of the host os. Use --with-build-platform-configure-options
         to point to a different build platform JDK.]),
,)

AC_ARG_WITH(help,
    AS_HELP_STRING([--with-help],
        [Enable the build of help. There is a special parameter "common" that
         can be used to bundle only the common part, .e.g help-specific icons.
         This is useful when you build the helpcontent separately.])
    [
                          Usage:     --with-help    build the old local help
                                 --without-help     no local help (default)
                                 --with-help=html   build the new HTML local help
                                 --with-help=online build the new HTML online help
    ],
,)

AC_ARG_WITH(omindex,
   AS_HELP_STRING([--with-omindex],
        [Enable the support of xapian-omega index for online help.])
   [
                         Usage: --with-omindex=server prepare the pages for omindex
                                but let xapian-omega be built in server.
                                --with-omindex=noxap do not prepare online pages
                                for xapian-omega
  ],
,)

libo_FUZZ_ARG_WITH(java,
    AS_HELP_STRING([--with-java=<java command>],
        [Specify the name of the Java interpreter command. Typically "java"
         which is the default.

         To build without support for Java components, applets, accessibility
         or the XML filters written in Java, use --without-java or --with-java=no.]),
    [ test -z "$with_java" -o "$with_java" = "yes" && with_java=java ],
    [ test -z "$with_java" -o "$with_java" = "yes" && with_java=java ]
)

AC_ARG_WITH(jvm-path,
    AS_HELP_STRING([--with-jvm-path=<absolute path to parent of jvm home>],
        [Use a specific JVM search path at runtime.
         e.g. use --with-jvm-path=/usr/lib/ to find JRE/JDK in /usr/lib/jvm/]),
,)

AC_ARG_WITH(ant-home,
    AS_HELP_STRING([--with-ant-home=<absolute path to Ant home>],
        [If you have installed Apache Ant on your system, please supply the path here.
         Note that this is not the location of the Ant binary but the location
         of the entire distribution.]),
,)

AC_ARG_WITH(symbol-config,
    AS_HELP_STRING([--with-symbol-config],
        [Configuration for the crashreport symbol upload]),
        [],
        [with_symbol_config=no])

AC_ARG_WITH(export-validation,
    AS_HELP_STRING([--without-export-validation],
        [Disable validating OOXML and ODF files as exported from in-tree tests.]),
,with_export_validation=auto)

AC_ARG_WITH(bffvalidator,
    AS_HELP_STRING([--with-bffvalidator=<absolute path to BFFValidator>],
        [Enables export validation for Microsoft Binary formats (doc, xls, ppt).
         Requires installed Microsoft Office Binary File Format Validator.
         Note: export-validation (--with-export-validation) is required to be turned on.
         See https://www.microsoft.com/en-us/download/details.aspx?id=26794]),
,with_bffvalidator=no)

libo_FUZZ_ARG_WITH(junit,
    AS_HELP_STRING([--with-junit=<absolute path to JUnit 4 jar>],
        [Specifies the JUnit 4 jar file to use for JUnit-based tests.
         --without-junit disables those tests. Not relevant in the --without-java case.]),
,with_junit=yes)

AC_ARG_WITH(hamcrest,
    AS_HELP_STRING([--with-hamcrest=<absolute path to hamcrest jar>],
        [Specifies the hamcrest jar file to use for JUnit-based tests.
         --without-junit disables those tests. Not relevant in the --without-java case.]),
,with_hamcrest=yes)

AC_ARG_WITH(perl-home,
    AS_HELP_STRING([--with-perl-home=<abs. path to Perl 5 home>],
        [If you have installed Perl 5 Distribution, on your system, please
         supply the path here. Note that this is not the location of the Perl
         binary but the location of the entire distribution.]),
,)

libo_FUZZ_ARG_WITH(doxygen,
    AS_HELP_STRING(
        [--with-doxygen=<absolute path to doxygen executable>],
        [Specifies the doxygen executable to use when generating ODK C/C++
         documentation. --without-doxygen disables generation of ODK C/C++
         documentation. Not relevant in the --disable-odk case.]),
,with_doxygen=yes)

AC_ARG_WITH(visual-studio,
    AS_HELP_STRING([--with-visual-studio=<2019/2022>],
        [Specify which Visual Studio version to use in case several are
         installed. Currently 2019 (default) and 2022 are supported.]),
,)

AC_ARG_WITH(windows-sdk,
    AS_HELP_STRING([--with-windows-sdk=<8.0(A)/8.1(A)/10.0>],
        [Specify which Windows SDK, or "Windows Kit", version to use
         in case the one that came with the selected Visual Studio
         is not what you want for some reason. Note that not all compiler/SDK
         combinations are supported. The intent is that this option should not
         be needed.]),
,)

AC_ARG_WITH(lang,
    AS_HELP_STRING([--with-lang="es sw tu cs sk"],
        [Use this option to build LibreOffice with additional UI language support.
         English (US) is always included by default.
         Separate multiple languages with space.
         For all languages, use --with-lang=ALL.]),
,)

AC_ARG_WITH(locales,
    AS_HELP_STRING([--with-locales="en es pt fr zh kr ja"],
        [Use this option to limit the locale information built in.
         Separate multiple locales with space.
         Very experimental and might well break stuff.
         Just a desperate measure to shrink code and data size.
         By default all the locales available is included.
         Just works with --disable-dynloading. Defaults to "ALL".
         This option is completely unrelated to --with-lang.])
    [
                          Affects also our character encoding conversion
                          tables for encodings mainly targeted for a
                          particular locale, like EUC-CN and EUC-TW for
                          zh, ISO-2022-JP for ja.

                          Affects also our add-on break iterator data for
                          some languages.

                          For the default, all locales, don't use this switch at all.
                          Specifying just the language part of a locale means all matching
                          locales will be included.
    ],
,)

# Kerberos and GSSAPI used only by PostgreSQL as of LibO 3.5
libo_FUZZ_ARG_WITH(krb5,
    AS_HELP_STRING([--with-krb5],
        [Enable MIT Kerberos 5 support in modules that support it.
         By default automatically enabled on platforms
         where a good system Kerberos 5 is available.]),
,)

libo_FUZZ_ARG_WITH(gssapi,
    AS_HELP_STRING([--with-gssapi],
        [Enable GSSAPI support in modules that support it.
         By default automatically enabled on platforms
         where a good system GSSAPI is available.]),
,)

AC_ARG_WITH(iwyu,
    AS_HELP_STRING([--with-iwyu],
        [Use given IWYU binary path to check unneeded includes instead of building.
         Use only if you are hacking on it.]),
,)

libo_FUZZ_ARG_WITH(lxml,
    AS_HELP_STRING([--without-lxml],
        [gla11y will use python lxml when available, potentially building a local copy if necessary.
         --without-lxml tells it to not use python lxml at all, which means that gla11y will only
         report widget classes and ids.]),
,)

libo_FUZZ_ARG_WITH(latest-c++,
    AS_HELP_STRING([--with-latest-c++],
        [Try to enable the latest features of the C++ compiler, even if they are not yet part of a
         published standard.]),,
        [with_latest_c__=no])

dnl ===================================================================
dnl Branding
dnl ===================================================================

AC_ARG_WITH(branding,
    AS_HELP_STRING([--with-branding=/path/to/images],
        [Use given path to retrieve branding images set.])
    [
                          Search for intro.png about.svg and logo.svg.
                          If any is missing, default ones will be used instead.

                          Search also progress.conf for progress
                          settings on intro screen :

                          PROGRESSBARCOLOR="255,255,255" Set color of
                          progress bar. Comma separated RGB decimal values.
                          PROGRESSSIZE="407,6" Set size of progress bar.
                          Comma separated decimal values (width, height).
                          PROGRESSPOSITION="61,317" Set position of progress
                          bar from left,top. Comma separated decimal values.
                          PROGRESSFRAMECOLOR="20,136,3" Set color of progress
                          bar frame. Comma separated RGB decimal values.
                          PROGRESSTEXTCOLOR="0,0,0" Set color of progress
                          bar text. Comma separated RGB decimal values.
                          PROGRESSTEXTBASELINE="287" Set vertical position of
                          progress bar text from top. Decimal value.

                          Default values will be used if not found.
    ],
,)


AC_ARG_WITH(extra-buildid,
    AS_HELP_STRING([--with-extra-buildid="Tinderbox: Win-x86 at 6, Branch:master, Date:2012-11-26_00.29.34"],
        [Show addition build identification in about dialog.]),
,)


AC_ARG_WITH(vendor,
    AS_HELP_STRING([--with-vendor="John the Builder"],
        [Set vendor of the build.]),
,)

AC_ARG_WITH(privacy-policy-url,
    AS_HELP_STRING([--with-privacy-policy-url="https://yourdomain/privacy-policy"],
        [The URL to your privacy policy (needed when
         enabling online-update or crashreporting via breakpad)]),
        [if test "x$with_privacy_policy_url" = "xyes"; then
            AC_MSG_FAILURE([you need to specify an argument when using --with-privacy-policy-url])
         elif test "x$with_privacy_policy_url" = "xno"; then
            with_privacy_policy_url="undefined"
         fi]
,[with_privacy_policy_url="undefined"])

AC_ARG_WITH(android-package-name,
    AS_HELP_STRING([--with-android-package-name="org.libreoffice"],
        [Set Android package name of the build.]),
,)

AC_ARG_WITH(compat-oowrappers,
    AS_HELP_STRING([--with-compat-oowrappers],
        [Install oo* wrappers in parallel with
         lo* ones to keep backward compatibility.
         Has effect only with make distro-pack-install]),
,)

AC_ARG_WITH(os-version,
    AS_HELP_STRING([--with-os-version=<OSVERSION>],
        [For FreeBSD users, use this option to override the detected OSVERSION.]),
,)

AC_ARG_WITH(idlc-cpp,
    AS_HELP_STRING([--with-idlc-cpp=<cpp/ucpp>],
        [Specify the C Preprocessor to use for idlc. Default is ucpp.]),
,)

AC_ARG_WITH(parallelism,
    AS_HELP_STRING([--with-parallelism],
        [Number of jobs to run simultaneously during build. Parallel builds can
        save a lot of time on multi-cpu machines. Defaults to the number of
        CPUs on the machine, unless you configure --enable-icecream - then to
        40.]),
,)

AC_ARG_WITH(all-tarballs,
    AS_HELP_STRING([--with-all-tarballs],
        [Download all external tarballs unconditionally]))

AC_ARG_WITH(gdrive-client-id,
    AS_HELP_STRING([--with-gdrive-client-id],
        [Provides the client id of the application for OAuth2 authentication
        on Google Drive. If either this or --with-gdrive-client-secret is
        empty, the feature will be disabled]),
)

AC_ARG_WITH(gdrive-client-secret,
    AS_HELP_STRING([--with-gdrive-client-secret],
        [Provides the client secret of the application for OAuth2
        authentication on Google Drive. If either this or
        --with-gdrive-client-id is empty, the feature will be disabled]),
)

AC_ARG_WITH(alfresco-cloud-client-id,
    AS_HELP_STRING([--with-alfresco-cloud-client-id],
        [Provides the client id of the application for OAuth2 authentication
        on Alfresco Cloud. If either this or --with-alfresco-cloud-client-secret is
        empty, the feature will be disabled]),
)

AC_ARG_WITH(alfresco-cloud-client-secret,
    AS_HELP_STRING([--with-alfresco-cloud-client-secret],
        [Provides the client secret of the application for OAuth2
        authentication on Alfresco Cloud. If either this or
        --with-alfresco-cloud-client-id is empty, the feature will be disabled]),
)

AC_ARG_WITH(onedrive-client-id,
    AS_HELP_STRING([--with-onedrive-client-id],
        [Provides the client id of the application for OAuth2 authentication
        on OneDrive. If either this or --with-onedrive-client-secret is
        empty, the feature will be disabled]),
)

AC_ARG_WITH(onedrive-client-secret,
    AS_HELP_STRING([--with-onedrive-client-secret],
        [Provides the client secret of the application for OAuth2
        authentication on OneDrive. If either this or
        --with-onedrive-client-id is empty, the feature will be disabled]),
)
dnl ===================================================================
dnl Do we want to use pre-build binary tarball for recompile
dnl ===================================================================

if test "$enable_library_bin_tar" = "yes" ; then
    USE_LIBRARY_BIN_TAR=TRUE
else
    USE_LIBRARY_BIN_TAR=
fi
AC_SUBST(USE_LIBRARY_BIN_TAR)

dnl ===================================================================
dnl Test whether build target is Release Build
dnl ===================================================================
AC_MSG_CHECKING([whether build target is Release Build])
if test "$enable_release_build" = "" -o "$enable_release_build" = "no"; then
    AC_MSG_RESULT([no])
    ENABLE_RELEASE_BUILD=
    GET_TASK_ALLOW_ENTITLEMENT='
        <!-- We want to be able to debug a hardened process when not building for release -->
        <key>com.apple.security.get-task-allow</key>
        <true/>'
else
    AC_MSG_RESULT([yes])
    ENABLE_RELEASE_BUILD=TRUE
    GET_TASK_ALLOW_ENTITLEMENT=''
fi
AC_SUBST(ENABLE_RELEASE_BUILD)
AC_SUBST(GET_TASK_ALLOW_ENTITLEMENT)

AC_MSG_CHECKING([whether to build a Community flavor])
if test -z "$enable_community_flavor" -o "$enable_community_flavor" = "yes"; then
    AC_DEFINE(HAVE_FEATURE_COMMUNITY_FLAVOR)
    AC_MSG_RESULT([yes])
else
    AC_MSG_RESULT([no])
fi

dnl ===================================================================
dnl Test whether to sign Windows Build
dnl ===================================================================
AC_MSG_CHECKING([whether to sign windows build])
if test "$enable_windows_build_signing" = "yes" -a "$_os" = "WINNT"; then
    AC_MSG_RESULT([yes])
    WINDOWS_BUILD_SIGNING="TRUE"
else
    AC_MSG_RESULT([no])
    WINDOWS_BUILD_SIGNING="FALSE"
fi
AC_SUBST(WINDOWS_BUILD_SIGNING)

dnl ===================================================================
dnl MacOSX build and runtime environment options
dnl ===================================================================

AC_ARG_WITH(macosx-version-min-required,
    AS_HELP_STRING([--with-macosx-version-min-required=<version>],
        [set the minimum OS version needed to run the built LibreOffice])
    [
                          e. g.: --with-macosx-version-min-required=10.12
    ],
,)

AC_ARG_WITH(macosx-version-max-allowed,
    AS_HELP_STRING([--with-macosx-version-max-allowed=<version>],
        [set the maximum allowed OS version the LibreOffice compilation can use APIs from])
    [
                          e. g.: --with-macosx-version-max-allowed=11.0
    ],
,)


dnl ===================================================================
dnl options for stuff used during cross-compilation build
dnl Not quite superseded by --with-build-platform-configure-options.
dnl TODO: check, if the "force" option is still needed anywhere.
dnl ===================================================================

AC_ARG_WITH(system-icu-for-build,
    AS_HELP_STRING([--with-system-icu-for-build=yes/no/force],
        [Use icu already on system for build tools (cross-compilation only).]))

dnl ===================================================================
dnl Check for incompatible options set by fuzzing, and reset those
dnl automatically to working combinations
dnl ===================================================================

if test "$libo_fuzzed_enable_dbus" = yes -a "$libo_fuzzed_enable_avahi" -a \
        "$enable_dbus" != "$enable_avahi"; then
    AC_MSG_NOTICE([Resetting --enable-avahi=$enable_dbus])
    enable_avahi=$enable_dbus
fi

add_lopath_after ()
{
    if ! echo "$LO_PATH" | $EGREP -q "(^|${P_SEP})$1($|${P_SEP})"; then
        LO_PATH="${LO_PATH:+$LO_PATH$P_SEP}$1"
    fi
}

add_lopath_before ()
{
    local IFS=${P_SEP}
    local path_cleanup
    local dir
    for dir in $LO_PATH ; do
        if test "$dir" != "$1" ; then
            path_cleanup=${path_cleanup:+$path_cleanup$P_SEP}$dir
        fi
    done
    LO_PATH="$1${path_cleanup:+$P_SEP$path_cleanup}"
}

dnl ===================================================================
dnl check for required programs (grep, awk, sed, bash)
dnl ===================================================================

pathmunge ()
{
    local new_path
    if test -n "$1"; then
        if test "$build_os" = "cygwin"; then
            if test "$GNUMAKE_WIN_NATIVE" = "TRUE" ; then
                PathFormat "$1"
                new_path=`cygpath -sm "$formatted_path"`
            else
                PathFormat "$1"
                new_path=`cygpath -u "$formatted_path"`
            fi
        else
            new_path="$1"
        fi
        if test "$2" = "after"; then
            add_lopath_after "$new_path"
        else
            add_lopath_before "$new_path"
        fi
    fi
}

AC_PROG_AWK
AC_PATH_PROG( AWK, $AWK)
if test -z "$AWK"; then
    AC_MSG_ERROR([install awk to run this script])
fi

AC_PATH_PROG(BASH, bash)
if test -z "$BASH"; then
    AC_MSG_ERROR([bash not found in \$PATH])
fi
AC_SUBST(BASH)

AC_MSG_CHECKING([for GNU or BSD tar])
for a in $GNUTAR gtar gnutar bsdtar tar /usr/sfw/bin/gtar; do
    $a --version 2> /dev/null | egrep "GNU|bsdtar"  2>&1 > /dev/null
    if test $? -eq 0;  then
        GNUTAR=$a
        break
    fi
done
AC_MSG_RESULT($GNUTAR)
if test -z "$GNUTAR"; then
    AC_MSG_ERROR([not found. install GNU or BSD tar.])
fi
AC_SUBST(GNUTAR)

AC_MSG_CHECKING([for tar's option to strip components])
$GNUTAR --help 2> /dev/null | egrep "bsdtar|strip-components" 2>&1 >/dev/null
if test $? -eq 0; then
    STRIP_COMPONENTS="--strip-components"
else
    $GNUTAR --help 2> /dev/null | egrep "strip-path" 2>&1 >/dev/null
    if test $? -eq 0; then
        STRIP_COMPONENTS="--strip-path"
    else
        STRIP_COMPONENTS="unsupported"
    fi
fi
AC_MSG_RESULT($STRIP_COMPONENTS)
if test x$STRIP_COMPONENTS = xunsupported; then
    AC_MSG_ERROR([you need a tar that is able to strip components.])
fi
AC_SUBST(STRIP_COMPONENTS)

dnl It is useful to have a BUILD_TYPE keyword to distinguish "normal"
dnl desktop OSes from "mobile" ones.

dnl We assume that a non-DESKTOP build type is also a non-NATIVE one.
dnl In other words, that when building for an OS that is not a
dnl "desktop" one but a "mobile" one, we are always cross-compiling.

dnl Note the direction of the implication; there is no assumption that
dnl cross-compiling would imply a non-desktop OS.

if test $_os != iOS -a $_os != Android -a $_os != Emscripten -a "$enable_fuzzers" != "yes"; then
    BUILD_TYPE="$BUILD_TYPE DESKTOP"
    AC_DEFINE(HAVE_FEATURE_DESKTOP)
    AC_DEFINE(HAVE_FEATURE_MULTIUSER_ENVIRONMENT)
fi

ENABLE_SERVICES_RDB_FROM_BUILD=
if test "$enable_services_rdb_from_build" = yes; then
    ENABLE_SERVICES_RDB_FROM_BUILD=TRUE
    if test -n "$with_locales" -a "$with_locales" != en -a "$with_locales" != ALL; then
        AC_MSG_ERROR([Currently just --with-locales=all or en is supported with --enable-services-rdb-from-build])
    fi
fi
AC_SUBST(ENABLE_SERVICES_RDB_FROM_BUILD)

# Whether to build "avmedia" functionality or not.

if test "$enable_avmedia" = yes; then
    BUILD_TYPE="$BUILD_TYPE AVMEDIA"
    AC_DEFINE(HAVE_FEATURE_AVMEDIA)
else
    test_gstreamer_1_0=no
fi

# Decide whether to build database connectivity stuff (including Base) or not.
if test "$enable_database_connectivity" != no; then
    BUILD_TYPE="$BUILD_TYPE DBCONNECTIVITY"
    AC_DEFINE(HAVE_FEATURE_DBCONNECTIVITY)
else
    if test "$_os" = iOS; then
        AC_MSG_ERROR([Presumly can't disable DB connectivity on iOS.])
    fi
    disable_database_connectivity_dependencies
fi

if test -z "$enable_extensions"; then
    # For iOS and Android Viewer, disable extensions unless specifically overridden with --enable-extensions.
    if test $_os != iOS && test $_os != Android -o "$ENABLE_ANDROID_LOK" = TRUE ; then
        enable_extensions=yes
    fi
fi

if test "$enable_extensions" = yes; then
    BUILD_TYPE="$BUILD_TYPE EXTENSIONS"
    AC_DEFINE(HAVE_FEATURE_EXTENSIONS)
else
    enable_extension_integration=no
    enable_extension_update=no
fi

DISABLE_SCRIPTING=''
if test "$enable_scripting" = yes; then
    BUILD_TYPE="$BUILD_TYPE SCRIPTING"
    AC_DEFINE(HAVE_FEATURE_SCRIPTING)
else
    DISABLE_SCRIPTING='TRUE'
    SCPDEFS="$SCPDEFS -DDISABLE_SCRIPTING"
fi

if test $_os = iOS -o $_os = Android -o $_os = Emscripten; then
    # Disable dynamic_loading always for iOS and Android
    enable_dynamic_loading=no
elif test -z "$enable_dynamic_loading"; then
    # Otherwise enable it unless specifically disabled
    enable_dynamic_loading=yes
fi

DISABLE_DYNLOADING=''
if test "$enable_dynamic_loading" = yes; then
    BUILD_TYPE="$BUILD_TYPE DYNLOADING"
else
    DISABLE_DYNLOADING='TRUE'
fi
AC_SUBST(DISABLE_DYNLOADING)

# remember SYSBASE value
AC_SUBST(SYSBASE)

dnl ===================================================================
dnl  Sort out various gallery compilation options
dnl ===================================================================
WITH_GALLERY_BUILD=TRUE
AC_MSG_CHECKING([how to build and package galleries])
if test -n "${with_galleries}"; then
    if test "$with_galleries" = "build"; then
        if test "$enable_database_connectivity" = no; then
            AC_MSG_ERROR([DB connectivity is needed for gengal / svx])
        fi
        AC_MSG_RESULT([build from source images internally])
    elif test "$with_galleries" = "no"; then
        WITH_GALLERY_BUILD=
        AC_MSG_RESULT([disable non-internal gallery build])
    else
        AC_MSG_ERROR([unknown value --with-galleries=$with_galleries])
    fi
else
    if test $_os != iOS -a $_os != Android; then
        AC_MSG_RESULT([internal src images for desktop])
    else
        WITH_GALLERY_BUILD=
        AC_MSG_RESULT([disable src image build])
    fi
fi
AC_SUBST(WITH_GALLERY_BUILD)

dnl ===================================================================
dnl  Checks if ccache is available
dnl ===================================================================
CCACHE_DEPEND_MODE=
if test "$enable_ccache" = "no"; then
    CCACHE=""
elif test -n "$enable_ccache" -o \( "$enable_ccache" = "" -a "$enable_icecream" != "yes" \); then
    case "%$CC%$CXX%" in
    # If $CC and/or $CXX already contain "ccache" (possibly suffixed with some version number etc),
    # assume that's good then
    *%ccache[[-_' ']]*|*/ccache[[-_' ']]*)
        AC_MSG_NOTICE([ccache seems to be included in a pre-defined CC and/or CXX])
        CCACHE_DEPEND_MODE=1
        ;;
    *)
        # try to use our own ccache if it is available and CCACHE was not already defined
        if test -z "$CCACHE"; then
            if test "$_os" = "WINNT"; then
                ccache_ext=.exe # e.g. openssl build needs ccache.exe, not just ccache
            fi
            if test -n "$LODE_HOME" -a -x "$LODE_HOME/opt/bin/ccache$ccache_ext" ; then
                CCACHE="$LODE_HOME/opt/bin/ccache$ccache_ext"
            elif test -x "/opt/lo/bin/ccache$ccache_ext"; then
                CCACHE="/opt/lo/bin/ccache$ccache_ext"
            fi
        fi
        AC_PATH_PROG([CCACHE],[ccache],[not found])
        if test "$CCACHE" != "not found" -a "$_os" = "WINNT"; then
            CCACHE=`win_short_path_for_make "$CCACHE"`
            # check that it has MSVC support (it should recognize it in CCACHE_COMPILERTYPE)
            rm -f conftest.txt
            AC_MSG_CHECKING([whether $CCACHE has MSVC support])
            CCACHE_COMPILERTYPE=cl CCACHE_LOGFILE=conftest.txt $CCACHE echo >/dev/null 2>/dev/null
            if grep -q 'Config: (environment) compiler_type = cl' conftest.txt; then
                AC_MSG_RESULT(yes)
            else
                AC_MSG_RESULT(no)
                CCACHE="not found"
            fi
            rm -f conftest.txt
        fi
        if test "$CCACHE" = "not found" -a "$_os" = "WINNT"; then
            # on windows/VC perhaps sccache is around?
            case "%$CC%$CXX%" in
            # If $CC and/or $CXX already contain "sccache" (possibly suffixed with some version number etc),
            # assume that's good then
            *%sccache[[-_' ']]*|*/sccache[[-_' ']]*)
                AC_MSG_NOTICE([sccache seems to be included in a pre-defined CC and/or CXX])
                CCACHE_DEPEND_MODE=1
                SCCACHE=1
                ;;
            *)
                # for sharing code below, reuse CCACHE env var
                AC_PATH_PROG([CCACHE],[sccache],[not found])
                if test "$CCACHE" != "not found"; then
                    CCACHE=`win_short_path_for_make "$CCACHE"`
                    SCCACHE=1
                    CCACHE_DEPEND_MODE=1
                fi
                ;;
            esac
        fi
        if test "$CCACHE" = "not found"; then
            CCACHE=""
        fi
        if test -n "$CCACHE" -a -z "$SCCACHE"; then
            CCACHE_DEPEND_MODE=1
            # Need to check for ccache version: otherwise prevents
            # caching of the results (like "-x objective-c++" for Mac)
            if test $_os = Darwin -o $_os = iOS; then
                # Check ccache version
                AC_MSG_CHECKING([whether version of ccache is suitable])
                CCACHE_VERSION=`"$CCACHE" -V | "$AWK" '/^ccache version/{print $3}'`
                CCACHE_NUMVER=`echo $CCACHE_VERSION | $AWK -F. '{ print \$1*10000+\$2*100+\$3 }'`
                if test "$CCACHE_VERSION" = "2.4_OOo" -o "$CCACHE_NUMVER" -ge "030100"; then
                    AC_MSG_RESULT([yes, $CCACHE_VERSION])
                else
                    AC_MSG_RESULT([no, $CCACHE_VERSION])
                    CCACHE=""
                    CCACHE_DEPEND_MODE=
                fi
            fi
        fi
        ;;
    esac
else
    CCACHE=""
fi
if test "$enable_ccache" = "nodepend"; then
    CCACHE_DEPEND_MODE=""
fi
AC_SUBST(CCACHE_DEPEND_MODE)

# sccache defaults are good enough
if test "$CCACHE" != "" -a -z "$SCCACHE"; then
    # e.g. (/home/rene/.config/ccache/ccache.conf) max_size = 20.0G
    # -p works with both 4.2 and 4.4
    ccache_size_msg=$([ccache -p | $AWK /max_size/'{ print $4 }' | sed -e 's/\.[0-9]*//'])
    ccache_size=$(echo "$ccache_size_msg" | grep "G" | sed -e 's/G.*$//')
    if test "$ccache_size" = ""; then
        ccache_size=$(echo "$ccache_size_msg" | grep "M" | sed -e 's/\ M.*$//')
        if test "$ccache_size" = ""; then
            ccache_size=0
        fi
        # we could not determine the size or it was less than 1GB -> disable auto-ccache
        if test $ccache_size -lt 1024; then
            CCACHE=""
            AC_MSG_WARN([ccache's cache size is less than 1GB using it is counter-productive: Disabling auto-ccache detection])
            add_warning "ccache's cache size is less than 1GB using it is counter-productive: auto-ccache detection disabled"
        else
            # warn that ccache may be too small for debug build
            AC_MSG_WARN([ccache's cache size is less than 5GB using it may be counter-productive for debug or symbol-enabled build])
            add_warning "ccache's cache size is less than 5GB using it may be counter-productive for debug or symbol-enabled build"
        fi
    else
        if test $ccache_size -lt 5; then
            #warn that ccache may be too small for debug build
            AC_MSG_WARN([ccache's cache size is less than 5GB using it may be counter-productive for debug or symbol-enabled build])
            add_warning "ccache's cache size is less than 5GB using it may be counter-productive for debug or symbol-enabled build"
        fi
    fi
fi

ENABLE_Z7_DEBUG=
if test "$enable_z7_debug" != no; then
    if test "$enable_z7_debug" = yes -o -n "$CCACHE"; then
        ENABLE_Z7_DEBUG=TRUE
    fi
else
    AC_MSG_WARN([ccache will not work with --disable-z7-debug])
    add_warning "ccache will not work with --disable-z7-debug"
fi
AC_SUBST(ENABLE_Z7_DEBUG)

dnl ===================================================================
dnl  Checks for C compiler,
dnl  The check for the C++ compiler is later on.
dnl ===================================================================
if test "$_os" != "WINNT"; then
    GCC_HOME_SET="true"
    AC_MSG_CHECKING([gcc home])
    if test -z "$with_gcc_home"; then
        if test "$enable_icecream" = "yes"; then
            if test -d "/usr/lib/icecc/bin"; then
                GCC_HOME="/usr/lib/icecc/"
            elif test -d "/usr/libexec/icecc/bin"; then
                GCC_HOME="/usr/libexec/icecc/"
            elif test -d "/opt/icecream/bin"; then
                GCC_HOME="/opt/icecream/"
            else
                AC_MSG_ERROR([Could not figure out the location of icecream GCC wrappers, manually use --with-gcc-home])

            fi
        else
            GCC_HOME=`which gcc | $SED -e s,/bin/gcc,,`
            GCC_HOME_SET="false"
        fi
    else
        GCC_HOME="$with_gcc_home"
    fi
    AC_MSG_RESULT($GCC_HOME)
    AC_SUBST(GCC_HOME)

    if test "$GCC_HOME_SET" = "true"; then
        if test -z "$CC"; then
            CC="$GCC_HOME/bin/gcc"
            CC_BASE="gcc"
        fi
        if test -z "$CXX"; then
            CXX="$GCC_HOME/bin/g++"
            CXX_BASE="g++"
        fi
    fi
fi

COMPATH=`dirname "$CC"`
if test "$COMPATH" = "."; then
    AC_PATH_PROGS(COMPATH, $CC)
    dnl double square bracket to get single because of M4 quote...
    COMPATH=`echo $COMPATH | $SED "s@/[[^/:]]*\\\$@@"`
fi
COMPATH=`echo $COMPATH | $SED "s@/[[Bb]][[Ii]][[Nn]]\\\$@@"`

dnl ===================================================================
dnl Java support
dnl ===================================================================
AC_MSG_CHECKING([whether to build with Java support])
if test "$with_java" != "no"; then
    if test "$DISABLE_SCRIPTING" = TRUE; then
        AC_MSG_RESULT([no, overridden by --disable-scripting])
        ENABLE_JAVA=""
        with_java=no
    else
        AC_MSG_RESULT([yes])
        ENABLE_JAVA="TRUE"
        AC_DEFINE(HAVE_FEATURE_JAVA)
    fi
else
    AC_MSG_RESULT([no])
    ENABLE_JAVA=""
fi

AC_SUBST(ENABLE_JAVA)

dnl ENABLE_JAVA="TRUE" if we want there to be *run-time* (and build-time) support for Java

dnl ENABLE_JAVA="" indicate no Java support at all

dnl ===================================================================
dnl Check macOS SDK and compiler
dnl ===================================================================

if test $_os = Darwin; then

    # The SDK in the currently selected Xcode should be found.

    AC_MSG_CHECKING([what macOS SDK to use])
    for macosx_sdk in 12.0 11.3 11.1 11.0 10.15 10.14 10.13; do
        MACOSX_SDK_PATH=`xcrun --sdk macosx${macosx_sdk} --show-sdk-path 2> /dev/null`
        if test -d "$MACOSX_SDK_PATH"; then
            break
        else
            MACOSX_SDK_PATH="`xcode-select -print-path`/Platforms/MacOSX.platform/Developer/SDKs/MacOSX${macosx_sdk}.sdk"
            if test -d "$MACOSX_SDK_PATH"; then
                break
            fi
        fi
    done
    if test ! -d "$MACOSX_SDK_PATH"; then
        AC_MSG_ERROR([Could not find an appropriate macOS SDK])
    fi

    AC_MSG_RESULT([macOS SDK $macosx_sdk at $MACOSX_SDK_PATH])

    case $macosx_sdk in
    10.13)
        MACOSX_SDK_VERSION=101300
        ;;
    10.14)
        MACOSX_SDK_VERSION=101400
        ;;
    10.15)
        MACOSX_SDK_VERSION=101500
        ;;
    11.0)
        MACOSX_SDK_VERSION=110000
        ;;
    11.1)
        MACOSX_SDK_VERSION=110100
        ;;
    11.3)
        MACOSX_SDK_VERSION=110300
        ;;
    12.0)
        MACOSX_SDK_VERSION=120000
        ;;
    *)
        AC_MSG_ERROR([macOS SDK $macosx_sdk is not supported])
        ;;
    esac

    if test "$host_cpu" = arm64 -a $MACOSX_SDK_VERSION -lt 110000; then
        AC_MSG_ERROR([macOS SDK $macosx_sdk is not supported for Apple Silicon])
    fi

    if test "$with_macosx_version_min_required" = "" ; then
        if test "$host_cpu" = x86_64; then
            with_macosx_version_min_required="10.12";
        else
            with_macosx_version_min_required="11.0";
        fi
    fi

    if test "$with_macosx_version_max_allowed" = "" ; then
        with_macosx_version_max_allowed="$macosx_sdk"
    fi

    # export this so that "xcrun" invocations later return matching values
    DEVELOPER_DIR="${MACOSX_SDK_PATH%/SDKs*}"
    DEVELOPER_DIR="${DEVELOPER_DIR%/Platforms*}"
    export DEVELOPER_DIR
    FRAMEWORKSHOME="$MACOSX_SDK_PATH/System/Library/Frameworks"
    MACOSX_DEPLOYMENT_TARGET="$with_macosx_version_min_required"

    AC_MSG_CHECKING([whether Xcode is new enough])
    my_xcode_ver1=$(xcrun xcodebuild -version | head -n 1)
    my_xcode_ver2=${my_xcode_ver1#Xcode }
    my_xcode_ver3=$(printf %s "$my_xcode_ver2" | $AWK -F. '{ print $1*100+($2<100?$2:99) }')
    if test "$my_xcode_ver3" -ge 1103; then
        AC_MSG_RESULT([yes ($my_xcode_ver2)])
    else
        AC_MSG_ERROR(["$my_xcode_ver1" is too old or unrecognized, must be at least Xcode 11.3])
    fi

    case "$with_macosx_version_min_required" in
    10.12)
        MAC_OS_X_VERSION_MIN_REQUIRED="101200"
        ;;
    10.13)
        MAC_OS_X_VERSION_MIN_REQUIRED="101300"
        ;;
    10.14)
        MAC_OS_X_VERSION_MIN_REQUIRED="101400"
        ;;
    10.15)
        MAC_OS_X_VERSION_MIN_REQUIRED="101500"
        ;;
    10.16)
        MAC_OS_X_VERSION_MIN_REQUIRED="101600"
        ;;
    11.0)
        MAC_OS_X_VERSION_MIN_REQUIRED="110000"
        ;;
    11.1)
        MAC_OS_X_VERSION_MIN_REQUIRED="110100"
        ;;
    11.3)
        MAC_OS_X_VERSION_MIN_REQUIRED="110300"
        ;;
    12.0)
        MAC_OS_X_VERSION_MIN_REQUIRED="120000"
        ;;
    *)
        AC_MSG_ERROR([with-macosx-version-min-required $with_macosx_version_min_required is not a supported value, supported values are 10.12--12.0])
        ;;
    esac

    LIBTOOL=/usr/bin/libtool
    INSTALL_NAME_TOOL=install_name_tool
    if test -z "$save_CC"; then
        stdlib=-stdlib=libc++

        AC_MSG_CHECKING([what C compiler to use])
        CC="`xcrun -find clang`"
        CC_BASE=`first_arg_basename "$CC"`
        if test "$host_cpu" = x86_64; then
            CC+=" -target x86_64-apple-macos"
        else
            CC+=" -target arm64-apple-macos"
        fi
        CC+=" -mmacosx-version-min=$with_macosx_version_min_required -isysroot $MACOSX_SDK_PATH"
        AC_MSG_RESULT([$CC])

        AC_MSG_CHECKING([what C++ compiler to use])
        CXX="`xcrun -find clang++`"
        CXX_BASE=`first_arg_basename "$CXX"`
        if test "$host_cpu" = x86_64; then
            CXX+=" -target x86_64-apple-macos"
        else
            CXX+=" -target arm64-apple-macos"
        fi
        CXX+=" $stdlib -mmacosx-version-min=$with_macosx_version_min_required -isysroot $MACOSX_SDK_PATH"
        AC_MSG_RESULT([$CXX])

        INSTALL_NAME_TOOL=`xcrun -find install_name_tool`
        AR=`xcrun -find ar`
        NM=`xcrun -find nm`
        STRIP=`xcrun -find strip`
        LIBTOOL=`xcrun -find libtool`
        RANLIB=`xcrun -find ranlib`
    fi

    case "$with_macosx_version_max_allowed" in
    10.12)
        MAC_OS_X_VERSION_MAX_ALLOWED="101200"
        ;;
    10.13)
        MAC_OS_X_VERSION_MAX_ALLOWED="101300"
        ;;
    10.14)
        MAC_OS_X_VERSION_MAX_ALLOWED="101400"
        ;;
    10.15)
        MAC_OS_X_VERSION_MAX_ALLOWED="101500"
        ;;
    11.0)
        MAC_OS_X_VERSION_MAX_ALLOWED="110000"
        ;;
    11.1)
        MAC_OS_X_VERSION_MAX_ALLOWED="110100"
        ;;
    11.3)
        MAC_OS_X_VERSION_MAX_ALLOWED="110300"
        ;;
    12.0)
        MAC_OS_X_VERSION_MAX_ALLOWED="120000"
        ;;
    *)
        AC_MSG_ERROR([with-macosx-version-max-allowed $with_macosx_version_max_allowed is not a supported value, supported values are 10.12--12.0])
        ;;
    esac

    AC_MSG_CHECKING([that macosx-version-min-required is coherent with macosx-version-max-allowed])
    if test $MAC_OS_X_VERSION_MIN_REQUIRED -gt $MAC_OS_X_VERSION_MAX_ALLOWED; then
        AC_MSG_ERROR([the version minimum required, $MAC_OS_X_VERSION_MIN_REQUIRED, must be <= the version maximum allowed, $MAC_OS_X_VERSION_MAX_ALLOWED])
    else
        AC_MSG_RESULT([ok])
    fi

    AC_MSG_CHECKING([that macosx-version-max-allowed is coherent with macos-with-sdk])
    if test $MAC_OS_X_VERSION_MAX_ALLOWED -gt $MACOSX_SDK_VERSION; then
        AC_MSG_ERROR([the version maximum allowed cannot be greater than the sdk level])
    else
        AC_MSG_RESULT([ok])
    fi
    AC_MSG_NOTICE([MAC_OS_X_VERSION_MIN_REQUIRED=$MAC_OS_X_VERSION_MIN_REQUIRED])
    AC_MSG_NOTICE([MAC_OS_X_VERSION_MAX_ALLOWED=$MAC_OS_X_VERSION_MAX_ALLOWED])

    AC_MSG_CHECKING([whether to do code signing])

    if test "$enable_macosx_code_signing" = yes; then
        # By default use the first suitable certificate (?).

        # http://stackoverflow.com/questions/13196291/difference-between-mac-developer-and-3rd-party-mac-developer-application
        # says that the "Mac Developer" certificate is useful just for self-testing. For distribution
        # outside the Mac App Store, use the "Developer ID Application" one, and for distribution in
        # the App Store, the "3rd Party Mac Developer" one. I think it works best to the
        # "Developer ID Application" one.

        identity=`security find-identity -p codesigning -v 2>/dev/null | grep 'Developer ID Application:' | $AWK '{print $2}' |head -1`
        if test -n "$identity"; then
            MACOSX_CODESIGNING_IDENTITY=$identity
            pretty_name=`security find-identity -p codesigning -v | grep "$MACOSX_CODESIGNING_IDENTITY" | sed -e 's/^[[^"]]*"//' -e 's/"//'`
            AC_MSG_RESULT([yes, using the identity $MACOSX_CODESIGNING_IDENTITY for $pretty_name])
        else
            AC_MSG_ERROR([cannot determine identity to use])
        fi
    elif test -n "$enable_macosx_code_signing" -a "$enable_macosx_code_signing" != no ; then
        MACOSX_CODESIGNING_IDENTITY=$enable_macosx_code_signing
        pretty_name=`security find-identity -p codesigning -v | grep "$MACOSX_CODESIGNING_IDENTITY" | sed -e 's/^[[^"]]*"//' -e 's/"//'`
        AC_MSG_RESULT([yes, using the identity $MACOSX_CODESIGNING_IDENTITY for $pretty_name])
    else
        AC_MSG_RESULT([no])
    fi

    AC_MSG_CHECKING([whether to create a Mac App Store package])

    if test -z "$enable_macosx_package_signing" || test "$enable_macosx_package_signing" == no; then
        AC_MSG_RESULT([no])
    elif test -z "$MACOSX_CODESIGNING_IDENTITY"; then
        AC_MSG_ERROR([You forgot --enable-macosx-code-signing])
    elif test "$enable_macosx_package_signing" = yes; then
        # By default use the first suitable certificate.
        # It should be a "3rd Party Mac Developer Installer" one

        identity=`security find-identity -v 2>/dev/null | grep '3rd Party Mac Developer Installer:' | awk '{print $2}' |head -1`
        if test -n "$identity"; then
            MACOSX_PACKAGE_SIGNING_IDENTITY=$identity
            pretty_name=`security find-identity -v | grep "$MACOSX_PACKAGE_SIGNING_IDENTITY" | sed -e 's/^[[^"]]*"//' -e 's/"//'`
            AC_MSG_RESULT([yes, using the identity $MACOSX_PACKAGE_SIGNING_IDENTITY for $pretty_name])
        else
            AC_MSG_ERROR([Could not find any suitable '3rd Party Mac Developer Installer' certificate])
        fi
    else
        MACOSX_PACKAGE_SIGNING_IDENTITY=$enable_macosx_package_signing
        pretty_name=`security find-identity -v | grep "$MACOSX_PACKAGE_SIGNING_IDENTITY" | sed -e 's/^[[^"]]*"//' -e 's/"//'`
        AC_MSG_RESULT([yes, using the identity $MACOSX_PACKAGE_SIGNING_IDENTITY for $pretty_name])
    fi

    if test -n "$MACOSX_CODESIGNING_IDENTITY" -a -n "$MACOSX_PACKAGE_SIGNING_IDENTITY" -a "$MACOSX_CODESIGNING_IDENTITY" = "$MACOSX_PACKAGE_SIGNING_IDENTITY"; then
        AC_MSG_ERROR([You should not use the same identity for code and package signing])
    fi

    AC_MSG_CHECKING([whether to sandbox the application])

    if test -n "$ENABLE_JAVA" -a "$enable_macosx_sandbox" = yes; then
        AC_MSG_ERROR([macOS sandboxing (actually App Store rules) disallows use of Java])
    elif test "$enable_macosx_sandbox" = yes; then
        ENABLE_MACOSX_SANDBOX=TRUE
        AC_DEFINE(HAVE_FEATURE_MACOSX_SANDBOX)
        AC_MSG_RESULT([yes])
    else
        AC_MSG_RESULT([no])
    fi

    AC_MSG_CHECKING([what macOS app bundle identifier to use])
    MACOSX_BUNDLE_IDENTIFIER=$with_macosx_bundle_identifier
    AC_MSG_RESULT([$MACOSX_BUNDLE_IDENTIFIER])
fi
AC_SUBST(MACOSX_SDK_PATH)
AC_SUBST(MACOSX_DEPLOYMENT_TARGET)
AC_SUBST(MAC_OS_X_VERSION_MIN_REQUIRED)
AC_SUBST(MAC_OS_X_VERSION_MAX_ALLOWED)
AC_SUBST(INSTALL_NAME_TOOL)
AC_SUBST(LIBTOOL) # Note that the macOS libtool command is unrelated to GNU libtool
AC_SUBST(MACOSX_CODESIGNING_IDENTITY)
AC_SUBST(MACOSX_PACKAGE_SIGNING_IDENTITY)
AC_SUBST(ENABLE_MACOSX_SANDBOX)
AC_SUBST(MACOSX_BUNDLE_IDENTIFIER)

dnl ===================================================================
dnl Check iOS SDK and compiler
dnl ===================================================================

if test $_os = iOS; then
    AC_MSG_CHECKING([what iOS SDK to use])
    current_sdk_ver=15.0
    older_sdk_vers="14.5"
    if test "$enable_ios_simulator" = "yes"; then
        platform=iPhoneSimulator
        versionmin=-mios-simulator-version-min=13.6
    else
        platform=iPhoneOS
        versionmin=-miphoneos-version-min=13.6
    fi
    xcode_developer=`xcode-select -print-path`

    for sdkver in $current_sdk_ver $older_sdk_vers; do
        t=$xcode_developer/Platforms/$platform.platform/Developer/SDKs/$platform$sdkver.sdk
        if test -d $t; then
            sysroot=$t
            break
        fi
    done

    if test -z "$sysroot"; then
        AC_MSG_ERROR([Could not find iOS SDK, expected something like $xcode_developer/Platforms/$platform.platform/Developer/SDKs/${platform}${current_sdk_ver}.sdk])
    fi

    AC_MSG_RESULT($sysroot)

    stdlib="-stdlib=libc++"

    AC_MSG_CHECKING([what C compiler to use])
    CC="`xcrun -find clang`"
    CC_BASE=`first_arg_basename "$CC"`
    CC+=" -arch $host_cpu_for_clang -isysroot $sysroot $versionmin"
    AC_MSG_RESULT([$CC])

    AC_MSG_CHECKING([what C++ compiler to use])
    CXX="`xcrun -find clang++`"
    CXX_BASE=`first_arg_basename "$CXX"`
    CXX+=" -arch $host_cpu_for_clang $stdlib -isysroot $sysroot $versionmin"
    AC_MSG_RESULT([$CXX])

    INSTALL_NAME_TOOL=`xcrun -find install_name_tool`
    AR=`xcrun -find ar`
    NM=`xcrun -find nm`
    STRIP=`xcrun -find strip`
    LIBTOOL=`xcrun -find libtool`
    RANLIB=`xcrun -find ranlib`
fi

AC_MSG_CHECKING([whether to treat the installation as read-only])

if test $_os = Darwin; then
    enable_readonly_installset=yes
elif test "$enable_extensions" != yes; then
    enable_readonly_installset=yes
fi
if test "$enable_readonly_installset" = yes; then
    AC_MSG_RESULT([yes])
    AC_DEFINE(HAVE_FEATURE_READONLY_INSTALLSET)
else
    AC_MSG_RESULT([no])
fi

dnl ===================================================================
dnl Structure of install set
dnl ===================================================================

if test $_os = Darwin; then
    LIBO_BIN_FOLDER=MacOS
    LIBO_ETC_FOLDER=Resources
    LIBO_LIBEXEC_FOLDER=MacOS
    LIBO_LIB_FOLDER=Frameworks
    LIBO_LIB_PYUNO_FOLDER=Resources
    LIBO_SHARE_FOLDER=Resources
    LIBO_SHARE_HELP_FOLDER=Resources/help
    LIBO_SHARE_JAVA_FOLDER=Resources/java
    LIBO_SHARE_PRESETS_FOLDER=Resources/presets
    LIBO_SHARE_READMES_FOLDER=Resources/readmes
    LIBO_SHARE_RESOURCE_FOLDER=Resources/resource
    LIBO_SHARE_SHELL_FOLDER=Resources/shell
    LIBO_URE_BIN_FOLDER=MacOS
    LIBO_URE_ETC_FOLDER=Resources/ure/etc
    LIBO_URE_LIB_FOLDER=Frameworks
    LIBO_URE_MISC_FOLDER=Resources/ure/share/misc
    LIBO_URE_SHARE_JAVA_FOLDER=Resources/java
elif test $_os = WINNT; then
    LIBO_BIN_FOLDER=program
    LIBO_ETC_FOLDER=program
    LIBO_LIBEXEC_FOLDER=program
    LIBO_LIB_FOLDER=program
    LIBO_LIB_PYUNO_FOLDER=program
    LIBO_SHARE_FOLDER=share
    LIBO_SHARE_HELP_FOLDER=help
    LIBO_SHARE_JAVA_FOLDER=program/classes
    LIBO_SHARE_PRESETS_FOLDER=presets
    LIBO_SHARE_READMES_FOLDER=readmes
    LIBO_SHARE_RESOURCE_FOLDER=program/resource
    LIBO_SHARE_SHELL_FOLDER=program/shell
    LIBO_URE_BIN_FOLDER=program
    LIBO_URE_ETC_FOLDER=program
    LIBO_URE_LIB_FOLDER=program
    LIBO_URE_MISC_FOLDER=program
    LIBO_URE_SHARE_JAVA_FOLDER=program/classes
else
    LIBO_BIN_FOLDER=program
    LIBO_ETC_FOLDER=program
    LIBO_LIBEXEC_FOLDER=program
    LIBO_LIB_FOLDER=program
    LIBO_LIB_PYUNO_FOLDER=program
    LIBO_SHARE_FOLDER=share
    LIBO_SHARE_HELP_FOLDER=help
    LIBO_SHARE_JAVA_FOLDER=program/classes
    LIBO_SHARE_PRESETS_FOLDER=presets
    LIBO_SHARE_READMES_FOLDER=readmes
    if test "$enable_fuzzers" != yes; then
        LIBO_SHARE_RESOURCE_FOLDER=program/resource
    else
        LIBO_SHARE_RESOURCE_FOLDER=resource
    fi
    LIBO_SHARE_SHELL_FOLDER=program/shell
    LIBO_URE_BIN_FOLDER=program
    LIBO_URE_ETC_FOLDER=program
    LIBO_URE_LIB_FOLDER=program
    LIBO_URE_MISC_FOLDER=program
    LIBO_URE_SHARE_JAVA_FOLDER=program/classes
fi
AC_DEFINE_UNQUOTED(LIBO_BIN_FOLDER,"$LIBO_BIN_FOLDER")
AC_DEFINE_UNQUOTED(LIBO_ETC_FOLDER,"$LIBO_ETC_FOLDER")
AC_DEFINE_UNQUOTED(LIBO_LIBEXEC_FOLDER,"$LIBO_LIBEXEC_FOLDER")
AC_DEFINE_UNQUOTED(LIBO_LIB_FOLDER,"$LIBO_LIB_FOLDER")
AC_DEFINE_UNQUOTED(LIBO_LIB_PYUNO_FOLDER,"$LIBO_LIB_PYUNO_FOLDER")
AC_DEFINE_UNQUOTED(LIBO_SHARE_FOLDER,"$LIBO_SHARE_FOLDER")
AC_DEFINE_UNQUOTED(LIBO_SHARE_HELP_FOLDER,"$LIBO_SHARE_HELP_FOLDER")
AC_DEFINE_UNQUOTED(LIBO_SHARE_JAVA_FOLDER,"$LIBO_SHARE_JAVA_FOLDER")
AC_DEFINE_UNQUOTED(LIBO_SHARE_PRESETS_FOLDER,"$LIBO_SHARE_PRESETS_FOLDER")
AC_DEFINE_UNQUOTED(LIBO_SHARE_RESOURCE_FOLDER,"$LIBO_SHARE_RESOURCE_FOLDER")
AC_DEFINE_UNQUOTED(LIBO_SHARE_SHELL_FOLDER,"$LIBO_SHARE_SHELL_FOLDER")
AC_DEFINE_UNQUOTED(LIBO_URE_BIN_FOLDER,"$LIBO_URE_BIN_FOLDER")
AC_DEFINE_UNQUOTED(LIBO_URE_ETC_FOLDER,"$LIBO_URE_ETC_FOLDER")
AC_DEFINE_UNQUOTED(LIBO_URE_LIB_FOLDER,"$LIBO_URE_LIB_FOLDER")
AC_DEFINE_UNQUOTED(LIBO_URE_MISC_FOLDER,"$LIBO_URE_MISC_FOLDER")
AC_DEFINE_UNQUOTED(LIBO_URE_SHARE_JAVA_FOLDER,"$LIBO_URE_SHARE_JAVA_FOLDER")

# Not all of them needed in config_host.mk, add more if need arises
AC_SUBST(LIBO_BIN_FOLDER)
AC_SUBST(LIBO_ETC_FOLDER)
AC_SUBST(LIBO_LIB_FOLDER)
AC_SUBST(LIBO_LIB_PYUNO_FOLDER)
AC_SUBST(LIBO_SHARE_FOLDER)
AC_SUBST(LIBO_SHARE_HELP_FOLDER)
AC_SUBST(LIBO_SHARE_JAVA_FOLDER)
AC_SUBST(LIBO_SHARE_PRESETS_FOLDER)
AC_SUBST(LIBO_SHARE_READMES_FOLDER)
AC_SUBST(LIBO_SHARE_RESOURCE_FOLDER)
AC_SUBST(LIBO_URE_BIN_FOLDER)
AC_SUBST(LIBO_URE_ETC_FOLDER)
AC_SUBST(LIBO_URE_LIB_FOLDER)
AC_SUBST(LIBO_URE_MISC_FOLDER)
AC_SUBST(LIBO_URE_SHARE_JAVA_FOLDER)

dnl ===================================================================
dnl Windows specific tests and stuff
dnl ===================================================================

reg_get_value()
{
    # Return value: $regvalue
    unset regvalue

    if test "$build_os" = "wsl"; then
        regvalue=$($BUILDDIR/solenv/wsl/wsl-lo-helper.exe --read-registry $1 "$2" 2>/dev/null)
        return
    fi

    local _regentry="/proc/registry${1}/${2}"
    if test -f "$_regentry"; then
        # Stop bash complaining about \0 bytes in input, as it can't handle them.
        # Registry keys read via /proc/registry* are always \0 terminated!
        local _regvalue=$(tr -d '\0' < "$_regentry")
        if test $? -eq 0; then
            regvalue=$_regvalue
        fi
    fi
}

# Get a value from the 32-bit side of the Registry
reg_get_value_32()
{
    reg_get_value "32" "$1"
}

# Get a value from the 64-bit side of the Registry
reg_get_value_64()
{
    reg_get_value "64" "$1"
}

case "$host_os" in
cygwin*|wsl*)
    COM=MSC
    OS=WNT
    RTL_OS=Windows
    if test "$GNUMAKE_WIN_NATIVE" = "TRUE" ; then
        P_SEP=";"
    else
        P_SEP=:
    fi
    case "$host_cpu" in
    x86_64)
        CPUNAME=X86_64
        RTL_ARCH=X86_64
        PLATFORMID=windows_x86_64
        WINDOWS_X64=1
        SCPDEFS="$SCPDEFS -DWINDOWS_X64"
        WIN_HOST_ARCH="x64"
        WIN_MULTI_ARCH="x86"
        WIN_HOST_BITS=64
        ;;
    i*86)
        CPUNAME=INTEL
        RTL_ARCH=x86
        PLATFORMID=windows_x86
        WIN_HOST_ARCH="x86"
        WIN_HOST_BITS=32
        WIN_OTHER_ARCH="x64"
        ;;
    aarch64)
        CPUNAME=AARCH64
        RTL_ARCH=AARCH64
        PLATFORMID=windows_aarch64
        WINDOWS_X64=1
        SCPDEFS="$SCPDEFS -DWINDOWS_AARCH64"
        WIN_HOST_ARCH="arm64"
        WIN_HOST_BITS=64
        with_ucrt_dir=no
        ;;
    *)
        AC_MSG_ERROR([Unsupported host_cpu $host_cpu for host_os $host_os])
        ;;
    esac

    case "$build_cpu" in
    x86_64) WIN_BUILD_ARCH="x64" ;;
    i*86) WIN_BUILD_ARCH="x86" ;;
    aarch64) WIN_BUILD_ARCH="arm64" ;;
    *)
        AC_MSG_ERROR([Unsupported build_cpu $build_cpu for host_os $host_os])
        ;;
    esac

    SCPDEFS="$SCPDEFS -D_MSC_VER"
    ;;
esac

# multi-arch is an arch, which can execute on the host (x86 on x64), while
# other-arch won't, but wouldn't break the build (x64 on x86).
if test -n "$WIN_MULTI_ARCH" -a -n "$WIN_OTHER_ARCH"; then
    AC_MSG_ERROR([Broken configure.ac file: can't have set \$WIN_MULTI_ARCH and $WIN_OTHER_ARCH])
fi


if test "$_os" = "iOS" -o "$build_cpu" != "$host_cpu"; then
    # To allow building Windows multi-arch releases without cross-tooling
    if test -z "$WIN_MULTI_ARCH" -a -z "$WIN_OTHER_ARCH"; then
        cross_compiling="yes"
    fi
fi

ENABLE_WASM_STRIP=''
if test "$cross_compiling" = "yes"; then
    export CROSS_COMPILING=TRUE
    if test "$enable_dynamic_loading" != yes -a "$enable_wasm_strip" = yes; then
        ENABLE_WASM_STRIP=TRUE
    fi
else
    CROSS_COMPILING=
    BUILD_TYPE="$BUILD_TYPE NATIVE"
fi
AC_SUBST(CROSS_COMPILING)
AC_SUBST(ENABLE_WASM_STRIP)

# Use -isystem (gcc) if possible, to avoid warnings in 3rd party headers.
# NOTE: must _not_ be used for bundled external libraries!
ISYSTEM=
if test "$GCC" = "yes"; then
    AC_MSG_CHECKING( for -isystem )
    save_CFLAGS=$CFLAGS
    CFLAGS="$CFLAGS -isystem /usr/include -Werror"
    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[ return 0; ]])],[ ISYSTEM="-isystem " ],[])
    CFLAGS=$save_CFLAGS
    if test -n "$ISYSTEM"; then
        AC_MSG_RESULT(yes)
    else
        AC_MSG_RESULT(no)
    fi
fi
if test -z "$ISYSTEM"; then
    # fall back to using -I
    ISYSTEM=-I
fi
AC_SUBST(ISYSTEM)

dnl ===================================================================
dnl  Check which Visual Studio compiler is used
dnl ===================================================================

map_vs_year_to_version()
{
    # Return value: $vsversion

    unset vsversion

    case $1 in
    2019)
        vsversion=16;;
    2022)
        vsversion=17;;
    *)
        AC_MSG_ERROR([Assertion failure - invalid argument "$1" to map_vs_year_to_version()]);;
    esac
}

vs_versions_to_check()
{
    # Args: $1 (optional) : versions to check, in the order of preference
    # Return value: $vsversions

    unset vsversions

    if test -n "$1"; then
        map_vs_year_to_version "$1"
        vsversions=$vsversion
    else
        # Default version is 2019
        vsversions="16"
    fi
}

win_get_env_from_vsvars32bat()
{
    local WRAPPERBATCHFILEPATH="`mktemp -t wrpXXXXXX.bat`"
    # Also seems to be located in another directory under the same name: vsvars32.bat
    # https://github.com/bazelbuild/bazel/blob/master/src/main/native/build_windows_jni.sh#L56-L57
    printf '@call "%s/../Common7/Tools/VsDevCmd.bat" /no_logo\r\n' "$(cygpath -w $VC_PRODUCT_DIR)" > $WRAPPERBATCHFILEPATH
    # use 'echo.%ENV%' syntax (instead of 'echo %ENV%') to avoid outputting "ECHO is off." in case when ENV is empty or a space
    printf '@setlocal\r\n at echo.%%%s%%\r\n at endlocal\r\n' "$1" >> $WRAPPERBATCHFILEPATH
    local result
    if test "$build_os" = "wsl"; then
        result=$(cd /mnt/c && cmd.exe /c $(wslpath -w $WRAPPERBATCHFILEPATH) | tr -d '\r')
    else
        chmod +x $WRAPPERBATCHFILEPATH
        result=$("$WRAPPERBATCHFILEPATH" | tr -d '\r')
    fi
    rm -f $WRAPPERBATCHFILEPATH
    printf '%s' "$result"
}

find_ucrt()
{
    reg_get_value_32 "HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Microsoft SDKs/Windows/v10.0/InstallationFolder"
    if test -n "$regvalue"; then
        PathFormat "$regvalue"
        UCRTSDKDIR=$formatted_path_unix
        reg_get_value_32 "HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Microsoft SDKs/Windows/v10.0/ProductVersion"
        UCRTVERSION=$regvalue
        # Rest if not exist
        if ! test -d "${UCRTSDKDIR}Include/$UCRTVERSION/ucrt"; then
          UCRTSDKDIR=
        fi
    fi
    if test -z "$UCRTSDKDIR"; then
        ide_env_dir="$VC_PRODUCT_DIR/../Common7/Tools/"
        ide_env_file="${ide_env_dir}VsDevCmd.bat"
        if test -f "$ide_env_file"; then
            PathFormat "$(win_get_env_from_vsvars32bat UniversalCRTSdkDir)"
            UCRTSDKDIR=$formatted_path
            UCRTVERSION=$(win_get_env_from_vsvars32bat UCRTVersion)
            dnl Hack needed at least by tml:
            if test "$UCRTVERSION" = 10.0.15063.0 \
                -a ! -f "${UCRTSDKDIR}Include/10.0.15063.0/um/sqlext.h" \
                -a -f "${UCRTSDKDIR}Include/10.0.14393.0/um/sqlext.h"
            then
                UCRTVERSION=10.0.14393.0
            fi
        else
          AC_MSG_ERROR([No UCRT found])
        fi
    fi
}

find_msvc()
{
    # Find Visual C++
    # Args: $1 (optional) : The VS version year
    # Return values: $vctest, $vcyear, $vctoolset, $vcnumwithdot, $vcbuildnumber

    unset vctest vctoolset vcnumwithdot vcbuildnumber

    vs_versions_to_check "$1"
    if test "$build_os" = wsl; then
        vswhere="$PROGRAMFILESX86"
    else
        vswhere="$(perl -e 'print $ENV{"ProgramFiles(x86)"}')"
    fi
    vswhere+="\\Microsoft Visual Studio\\Installer\\vswhere.exe"
    PathFormat "$vswhere"
    vswhere=$formatted_path_unix
    for ver in $vsversions; do
        vswhereoutput=`$vswhere -version "@<:@ $ver , $(expr $ver + 1) @:}@" -requires Microsoft.VisualStudio.Component.VC.Tools.x86.x64 -property installationPath | head -1`
        if test -z "$vswhereoutput"; then
            vswhereoutput=`$vswhere -prerelease -version "@<:@ $ver , $(expr $ver + 1) @:}@" -requires Microsoft.VisualStudio.Component.VC.Tools.x86.x64 -property installationPath | head -1`
        fi
        # Fall back to all MS products (this includes VC++ Build Tools)
        if ! test -n "$vswhereoutput"; then
            AC_MSG_CHECKING([VC++ Build Tools and similar])
            vswhereoutput=`$vswhere -products \* -version "@<:@ $ver , $(expr $ver + 1) @:}@" -requires Microsoft.VisualStudio.Component.VC.Tools.x86.x64 -property installationPath | head -1`
        fi
        if test -n "$vswhereoutput"; then
            PathFormat "$vswhereoutput"
            vctest=$formatted_path_unix
            break
        fi
    done

    if test -n "$vctest"; then
        vcnumwithdot="$ver.0"
        case "$vcnumwithdot" in
        16.0)
            vcyear=2019
            vctoolset=v142
            ;;
        17.0)
            vcyear=2022
            vctoolset=v143
            ;;
        esac
        vcbuildnumber=`ls $vctest/VC/Tools/MSVC -A1r | head -1`

    fi
}

test_cl_exe()
{
    AC_MSG_CHECKING([$1 compiler])

    CL_EXE_PATH="$2/cl.exe"

    if test ! -f "$CL_EXE_PATH"; then
        if test "$1" = "multi-arch"; then
            AC_MSG_WARN([no compiler (cl.exe) in $2])
            return 1
        else
            AC_MSG_ERROR([no compiler (cl.exe) in $2])
        fi
    fi

    dnl ===========================================================
    dnl  Check for the corresponding mspdb*.dll
    dnl ===========================================================

    # MSVC 15.0 has libraries from 14.0?
    mspdbnum="140"

    if test ! -e "$2/mspdb${mspdbnum}.dll"; then
        AC_MSG_ERROR([No mspdb${mspdbnum}.dll in $2, Visual Studio installation broken?])
    fi

    # The compiles has to find its shared libraries
    OLD_PATH="$PATH"
    TEMP_PATH=`cygpath -d "$2"`
    PATH="`cygpath -u "$TEMP_PATH"`:$PATH"

    if ! "$CL_EXE_PATH" -? </dev/null >/dev/null 2>&1; then
        AC_MSG_ERROR([no compiler (cl.exe) in $2])
    fi

    PATH="$OLD_PATH"

    AC_MSG_RESULT([$CL_EXE_PATH])
}

SOLARINC=
MSBUILD_PATH=
DEVENV=
if test "$_os" = "WINNT"; then
    AC_MSG_CHECKING([Visual C++])
    find_msvc "$with_visual_studio"
    if test -z "$vctest"; then
        if test -n "$with_visual_studio"; then
            AC_MSG_ERROR([no Visual Studio $with_visual_studio installation found])
        else
            AC_MSG_ERROR([no Visual Studio installation found])
        fi
    fi
    AC_MSG_RESULT([])

    VC_PRODUCT_DIR="$vctest/VC"
    COMPATH="$VC_PRODUCT_DIR/Tools/MSVC/$vcbuildnumber"

    # $WIN_OTHER_ARCH is a hack to test the x64 compiler on x86, even if it's not multi-arch
    if test -n "$WIN_MULTI_ARCH" -o -n "$WIN_OTHER_ARCH"; then
        MSVC_MULTI_PATH="$COMPATH/bin/Host$WIN_BUILD_ARCH/${WIN_MULTI_ARCH}${WIN_OTHER_ARCH}"
        test_cl_exe "multi-arch" "$MSVC_MULTI_PATH"
        if test $? -ne 0; then
            WIN_MULTI_ARCH=""
            WIN_OTHER_ARCH=""
        fi
    fi

    if test "$WIN_BUILD_ARCH" = "$WIN_HOST_ARCH"; then
        MSVC_BUILD_PATH="$COMPATH/bin/Host$WIN_BUILD_ARCH/$WIN_BUILD_ARCH"
        test_cl_exe "build" "$MSVC_BUILD_PATH"
    fi

    if test "$WIN_BUILD_ARCH" != "$WIN_HOST_ARCH"; then
        MSVC_HOST_PATH="$COMPATH/bin/Host$WIN_BUILD_ARCH/$WIN_HOST_ARCH"
        test_cl_exe "host" "$MSVC_HOST_PATH"
    else
        MSVC_HOST_PATH="$MSVC_BUILD_PATH"
    fi

    AC_MSG_CHECKING([for short pathname of VC product directory])
    VC_PRODUCT_DIR=`win_short_path_for_make "$VC_PRODUCT_DIR"`
    AC_MSG_RESULT([$VC_PRODUCT_DIR])

    UCRTSDKDIR=
    UCRTVERSION=

    AC_MSG_CHECKING([for UCRT location])
    find_ucrt
    # find_ucrt errors out if it doesn't find it
    AC_MSG_RESULT([$UCRTSDKDIR ($UCRTVERSION)])
    PathFormat "${UCRTSDKDIR}Include/$UCRTVERSION/ucrt"
    ucrtincpath_formatted=$formatted_path
    # SOLARINC is used for external modules and must be set too.
    # And no, it's not sufficient to set SOLARINC only, as configure
    # itself doesn't honour it.
    SOLARINC="$SOLARINC -I$ucrtincpath_formatted"
    CFLAGS="$CFLAGS -I$ucrtincpath_formatted"
    CXXFLAGS="$CXXFLAGS -I$ucrtincpath_formatted"
    CPPFLAGS="$CPPFLAGS -I$ucrtincpath_formatted"

    AC_SUBST(UCRTSDKDIR)
    AC_SUBST(UCRTVERSION)

    AC_MSG_CHECKING([for MSBuild.exe location for: $vcnumwithdot])
    # Find the proper version of MSBuild.exe to use based on the VS version
    reg_get_value_32 HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/MSBuild/$vcnumwithdot/MSBuildOverrideTasksPath
    if test -z "$regvalue" ; then
        if test "$WIN_BUILD_ARCH" != "x64"; then
            regvalue="$VC_PRODUCT_DIR/../MSBuild/Current/Bin"
        else
            regvalue="$VC_PRODUCT_DIR/../MSBuild/Current/Bin/amd64"
        fi
    fi
    if test -d "$regvalue" ; then
        MSBUILD_PATH=`win_short_path_for_make "$regvalue"`
        AC_MSG_RESULT([$regvalue])
    else
        AC_MSG_ERROR([MSBuild.exe location not found])
    fi

    # Find the version of devenv.exe
    # MSVC 2017 devenv does not start properly from a DOS 8.3 path
    DEVENV=$(cygpath -lm "$VC_PRODUCT_DIR/../Common7/IDE/devenv.exe")
    DEVENV_unix=$(cygpath -u "$DEVENV")
    if test ! -e "$DEVENV_unix"; then
        AC_MSG_WARN([No devenv.exe found - this is expected for VC++ Build Tools])
    fi

    dnl Save the true MSVC cl.exe for use when CC/CXX is actually clang-cl,
    dnl needed when building CLR code:
    if test -z "$MSVC_CXX"; then
        # This gives us a posix path with 8.3 filename restrictions
        MSVC_CXX=`win_short_path_for_make "$MSVC_HOST_PATH/cl.exe"`
    fi

    if test -z "$CC"; then
        CC=$MSVC_CXX
        CC_BASE=`first_arg_basename "$CC"`
    fi
    if test -z "$CXX"; then
        CXX=$MSVC_CXX
        CXX_BASE=`first_arg_basename "$CXX"`
    fi

    if test -n "$CC"; then
        # Remove /cl.exe from CC case insensitive
        AC_MSG_NOTICE([found Visual C++ $vcyear])

        main_include_dir=`cygpath -d -m "$COMPATH/Include"`
        CPPFLAGS="$CPPFLAGS -I$main_include_dir"

        PathFormat "$COMPATH"
        COMPATH=`win_short_path_for_make "$formatted_path"`

        VCVER=$vcnumwithdot
        VCTOOLSET=$vctoolset

        # The WINDOWS_SDK_ACCEPTABLE_VERSIONS is mostly an educated guess...  Assuming newer ones
        # are always "better", we list them in reverse chronological order.

        case "$vcnumwithdot" in
        16.0 | 17.0)
            WINDOWS_SDK_ACCEPTABLE_VERSIONS="10.0 8.1A 8.1 8.0"
            ;;
        esac

        # The expectation is that --with-windows-sdk should not need to be used
        if test -n "$with_windows_sdk"; then
            case " $WINDOWS_SDK_ACCEPTABLE_VERSIONS " in
            *" "$with_windows_sdk" "*)
                WINDOWS_SDK_ACCEPTABLE_VERSIONS=$with_windows_sdk
                ;;
            *)
                AC_MSG_ERROR([Windows SDK $with_windows_sdk is not known to work with VS $vcyear])
                ;;
            esac
        fi

        # Make AC_COMPILE_IFELSE etc. work (set by AC_PROG_C, which we don't use for MSVC)
        ac_objext=obj
        ac_exeext=exe

    else
        AC_MSG_ERROR([Visual C++ not found after all, huh])
    fi

    AC_MSG_CHECKING([$CC_BASE is at least Visual Studio 2019 version 16.5])
    AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
        // See <https://docs.microsoft.com/en-us/cpp/preprocessor/predefined-macros> for mapping
        // between Visual Studio versions and _MSC_VER:
        #if _MSC_VER < 1925
        #error
        #endif
    ]])],[AC_MSG_RESULT([yes])],[AC_MSG_ERROR([no])])

    # Check for 64-bit (cross-)compiler to use to build the 64-bit
    # version of the Explorer extension (and maybe other small
    # bits, too) needed when installing a 32-bit LibreOffice on a
    # 64-bit OS. The 64-bit Explorer extension is a feature that
    # has been present since long in OOo. Don't confuse it with
    # building LibreOffice itself as 64-bit code.

    BUILD_X64=
    CXX_X64_BINARY=

    if test "$WIN_HOST_ARCH" = "x86" -a -n "$WIN_OTHER_ARCH"; then
        AC_MSG_CHECKING([for the libraries to build the 64-bit Explorer extensions])
        if test -f "$COMPATH/atlmfc/lib/x64/atls.lib" -o \
             -f "$COMPATH/atlmfc/lib/spectre/x64/atls.lib"
        then
            BUILD_X64=TRUE
            CXX_X64_BINARY=`win_short_path_for_make "$MSVC_MULTI_PATH/cl.exe"`
            AC_MSG_RESULT([found])
        else
            AC_MSG_RESULT([not found])
            AC_MSG_WARN([Installation set will not contain 64-bit Explorer extensions])
        fi
    elif test "$WIN_HOST_ARCH" = "x64"; then
        CXX_X64_BINARY=$CXX
    fi
    AC_SUBST(BUILD_X64)

    # These are passed to the environment and then used in gbuild/platform/com_MSC_class.mk
    AC_SUBST(CXX_X64_BINARY)

    # Check for 32-bit compiler to use to build the 32-bit TWAIN shim
    # needed to support TWAIN scan on both 32- and 64-bit systems

    case "$WIN_HOST_ARCH" in
    x64)
        AC_MSG_CHECKING([for a x86 compiler and libraries for 32-bit binaries required for TWAIN support])
        if test -n "$CXX_X86_BINARY"; then
            BUILD_X86=TRUE
            AC_MSG_RESULT([preset])
        elif test -n "$WIN_MULTI_ARCH"; then
            BUILD_X86=TRUE
            CXX_X86_BINARY=`win_short_path_for_make "$MSVC_MULTI_PATH/cl.exe"`
            CXX_X86_BINARY+=" /arch:SSE"
            AC_MSG_RESULT([found])
        else
            AC_MSG_RESULT([not found])
            AC_MSG_WARN([Installation set will not contain 32-bit binaries required for TWAIN support])
        fi
        ;;
    x86)
        BUILD_X86=TRUE
        CXX_X86_BINARY=$MSVC_CXX
        ;;
    esac
    AC_SUBST(BUILD_X86)
    AC_SUBST(CXX_X86_BINARY)
fi
AC_SUBST(VCVER)
AC_SUBST(VCTOOLSET)
AC_SUBST(DEVENV)
AC_SUBST(MSVC_CXX)

COM_IS_CLANG=
AC_MSG_CHECKING([whether the compiler is actually Clang])
AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
    #ifndef __clang__
    you lose
    #endif
    int foo=42;
    ]])],
    [AC_MSG_RESULT([yes])
     COM_IS_CLANG=TRUE],
    [AC_MSG_RESULT([no])])
AC_SUBST(COM_IS_CLANG)

CLANGVER=
if test "$COM_IS_CLANG" = TRUE; then
    AC_MSG_CHECKING([whether Clang is new enough])
    AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
        #if !defined __apple_build_version__
        #error
        #endif
        ]])],
        [my_apple_clang=yes],[my_apple_clang=])
    if test "$my_apple_clang" = yes; then
        AC_MSG_RESULT([assumed yes (Apple Clang)])
    elif test "$_os" = Emscripten; then
        AC_MSG_RESULT([assumed yes (Emscripten Clang)])
    else
        if test "$_os" = WINNT; then
            dnl In which case, assume clang-cl:
            my_args="/EP /TC"
        else
            my_args="-E -P"
        fi
        clang_version=`echo __clang_major__.__clang_minor__.__clang_patchlevel__ | $CC $my_args - | sed 's/ //g'`
        CLANG_FULL_VERSION=`echo __clang_version__ | $CC $my_args -`
        CLANGVER=`echo $clang_version \
            | $AWK -F. '{ print \$1*10000+(\$2<100?\$2:99)*100+(\$3<100?\$3:99) }'`
        if test "$CLANGVER" -ge 50002; then
            AC_MSG_RESULT([yes ($clang_version)])
        else
            AC_MSG_ERROR(["$CLANG_FULL_VERSION" is too old or unrecognized, must be at least Clang 5.0.2])
        fi
        AC_DEFINE_UNQUOTED(CLANG_VERSION,$CLANGVER)
        AC_DEFINE_UNQUOTED(CLANG_FULL_VERSION,$CLANG_FULL_VERSION)
    fi
fi

SHOWINCLUDES_PREFIX=
if test "$_os" = WINNT; then
    dnl We need to guess the prefix of the -showIncludes output, it can be
    dnl localized
    AC_MSG_CHECKING([the dependency generation prefix (cl.exe -showIncludes)])
    echo "#include <stdlib.h>" > conftest.c
    SHOWINCLUDES_PREFIX=`$CC $CFLAGS -c -showIncludes conftest.c 2>/dev/null | \
        grep 'stdlib\.h' | head -n1 | sed 's/ [[[:alpha:]]]:.*//'`
    rm -f conftest.c conftest.obj
    if test -z "$SHOWINCLUDES_PREFIX"; then
        AC_MSG_ERROR([cannot determine the -showIncludes prefix])
    else
        AC_MSG_RESULT(["$SHOWINCLUDES_PREFIX"])
    fi
fi
AC_SUBST(SHOWINCLUDES_PREFIX)

#
# prefix C with ccache if needed
#
if test "$CCACHE" != ""; then
    AC_MSG_CHECKING([whether $CC_BASE is already ccached])

    AC_LANG_PUSH([C])
    save_CFLAGS=$CFLAGS
    CFLAGS="$CFLAGS --ccache-skip -O2"
    # msvc does not fail on unknown options, check stdout
    if test "$COM" = MSC; then
        CFLAGS="$CFLAGS -nologo"
    fi
    save_ac_c_werror_flag=$ac_c_werror_flag
    ac_c_werror_flag=yes
    dnl an empty program will do, we're checking the compiler flags
    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([],[])],
                      [use_ccache=yes], [use_ccache=no])
    CFLAGS=$save_CFLAGS
    ac_c_werror_flag=$save_ac_c_werror_flag
    if test $use_ccache = yes -a "${CCACHE/*sccache*/}" != ""; then
        AC_MSG_RESULT([yes])
    else
        CC="$CCACHE $CC"
        CC_BASE="ccache $CC_BASE"
        AC_MSG_RESULT([no])
    fi
    AC_LANG_POP([C])
fi

# ===================================================================
# check various GCC options that Clang does not support now but maybe
# will somewhen in the future, check them even for GCC, so that the
# flags are set
# ===================================================================

HAVE_GCC_GGDB2=
if test "$GCC" = "yes" -a "$_os" != "Emscripten"; then
    AC_MSG_CHECKING([whether $CC_BASE supports -ggdb2])
    save_CFLAGS=$CFLAGS
    CFLAGS="$CFLAGS -Werror -ggdb2"
    AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[ return 0; ]])],[ HAVE_GCC_GGDB2=TRUE ],[])
    CFLAGS=$save_CFLAGS
    if test "$HAVE_GCC_GGDB2" = "TRUE"; then
        AC_MSG_RESULT([yes])
    else
        AC_MSG_RESULT([no])
    fi

    if test "$host_cpu" = "m68k"; then
        AC_MSG_CHECKING([whether $CC_BASE supports -mlong-jump-table-offsets])
        save_CFLAGS=$CFLAGS
        CFLAGS="$CFLAGS -Werror -mlong-jump-table-offsets"
        AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[ return 0; ]])],[ HAVE_GCC_LONG_JUMP_TABLE_OFFSETS=TRUE ],[])
        CFLAGS=$save_CFLAGS
        if test "$HAVE_GCC_LONG_JUMP_TABLE_OFFSETS" = "TRUE"; then
            AC_MSG_RESULT([yes])
        else
            AC_MSG_ERROR([no])
        fi
    fi
fi
AC_SUBST(HAVE_GCC_GGDB2)

dnl ===================================================================
dnl  Test the gcc version
dnl ===================================================================
if test "$GCC" = "yes" -a -z "$COM_IS_CLANG"; then
    AC_MSG_CHECKING([the GCC version])
    _gcc_version=`$CC -dumpfullversion`
    gcc_full_version=$(printf '%s' "$_gcc_version" | \
        $AWK -F. '{ print $1*10000+$2*100+(NF<3?1:$3) }')
    GCC_VERSION=`echo $_gcc_version | $AWK -F. '{ print \$1*100+\$2 }'`

    AC_MSG_RESULT([gcc $_gcc_version ($gcc_full_version)])

    if test "$gcc_full_version" -lt 70000; then
        AC_MSG_ERROR([GCC $_gcc_version is too old, must be at least GCC 7.0.0])
    fi
else
    # Explicitly force GCC_VERSION to be empty, even for Clang, to check incorrect uses.
    # GCC version should generally be checked only when handling GCC-specific bugs, for testing
    # things like features configure checks should be used, otherwise they may e.g. fail with Clang
    # (which reports itself as GCC 4.2.1).
    GCC_VERSION=
fi
AC_SUBST(GCC_VERSION)

dnl Set the ENABLE_DBGUTIL variable
dnl ===================================================================
AC_MSG_CHECKING([whether to build with additional debug utilities])
if test -n "$enable_dbgutil" -a "$enable_dbgutil" != "no"; then
    ENABLE_DBGUTIL="TRUE"
    # this is an extra var so it can have different default on different MSVC
    # versions (in case there are version specific problems with it)
    MSVC_USE_DEBUG_RUNTIME="TRUE"

    AC_MSG_RESULT([yes])
    # cppunit and graphite expose STL in public headers
    if test "$with_system_cppunit" = "yes"; then
        AC_MSG_ERROR([--with-system-cppunit conflicts with --enable-dbgutil])
    else
        with_system_cppunit=no
    fi
    if test "$with_system_graphite" = "yes"; then
        AC_MSG_ERROR([--with-system-graphite conflicts with --enable-dbgutil])
    else
        with_system_graphite=no
    fi
    if test "$with_system_orcus" = "yes"; then
        AC_MSG_ERROR([--with-system-orcus conflicts with --enable-dbgutil])
    else
        with_system_orcus=no
    fi
    if test "$with_system_libcmis" = "yes"; then
        AC_MSG_ERROR([--with-system-libcmis conflicts with --enable-dbgutil])
    else
        with_system_libcmis=no
    fi
    if test "$with_system_hunspell" = "yes"; then
        AC_MSG_ERROR([--with-system-hunspell conflicts with --enable-dbgutil])
    else
        with_system_hunspell=no
    fi
    if test "$with_system_gpgmepp" = "yes"; then
        AC_MSG_ERROR([--with-system-gpgmepp conflicts with --enable-dbgutil])
    else
        with_system_gpgmepp=no
    fi
    # As mixing system libwps and non-system libnumbertext or vice versa likely causes trouble (see
    # 603074c5f2b84de8a24593faf807da784b040625 "Pass _GLIBCXX_DEBUG into external/libwps" and the
    # mail thread starting at <https://gcc.gnu.org/ml/gcc/2018-05/msg00057.html> "libstdc++: ODR
    # violation when using std::regex with and without -D_GLIBCXX_DEBUG"), simply make sure neither
    # of those two is using the system variant:
    if test "$with_system_libnumbertext" = "yes"; then
        AC_MSG_ERROR([--with-system-libnumbertext conflicts with --enable-dbgutil])
    else
        with_system_libnumbertext=no
    fi
    if test "$with_system_libwps" = "yes"; then
        AC_MSG_ERROR([--with-system-libwps conflicts with --enable-dbgutil])
    else
        with_system_libwps=no
    fi
else
    ENABLE_DBGUTIL=""
    MSVC_USE_DEBUG_RUNTIME=""
    AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_DBGUTIL)
AC_SUBST(MSVC_USE_DEBUG_RUNTIME)

dnl Set the ENABLE_DEBUG variable.
dnl ===================================================================
if test -n "$enable_debug" && test "$enable_debug" != "yes" && test "$enable_debug" != "no"; then
    AC_MSG_ERROR([--enable-debug now accepts only yes or no, use --enable-symbols])
fi
if test -n "$ENABLE_DBGUTIL" -a "$enable_debug" = "no"; then
    if test -z "$libo_fuzzed_enable_debug"; then
        AC_MSG_ERROR([--disable-debug cannot be used with --enable-dbgutil])
    else
        AC_MSG_NOTICE([Resetting --enable-debug=yes])
        enable_debug=yes
    fi
fi

AC_MSG_CHECKING([whether to do a debug build])
if test -n "$ENABLE_DBGUTIL" -o \( -n "$enable_debug" -a "$enable_debug" != "no" \) ; then
    ENABLE_DEBUG="TRUE"
    if test -n "$ENABLE_DBGUTIL" ; then
        AC_MSG_RESULT([yes (dbgutil)])
    else
        AC_MSG_RESULT([yes])
    fi
else
    ENABLE_DEBUG=""
    AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_DEBUG)

dnl ===================================================================
dnl Select the linker to use (gold/lld/ld.bfd).
dnl This is done only after compiler checks (need to know if Clang is
dnl used, for different defaults) and after checking if a debug build
dnl is wanted (non-debug builds get the default linker if not explicitly
dnl specified otherwise).
dnl All checks for linker features/options should come after this.
dnl ===================================================================
check_use_ld()
{
    use_ld=-fuse-ld=${1%%:*}
    use_ld_path=${1#*:}
    if test "$use_ld_path" != "$1"; then
        use_ld="$use_ld --ld-path=$use_ld_path"
    fi
    use_ld_fail_if_error=$2
    use_ld_ok=
    AC_MSG_CHECKING([for $use_ld linker support])
    use_ld_ldflags_save="$LDFLAGS"
    LDFLAGS="$LDFLAGS $use_ld"
    AC_LINK_IFELSE([AC_LANG_PROGRAM([
#include <stdio.h>
        ],[
printf ("hello world\n");
        ])], USE_LD=$use_ld, [])
    if test -n "$USE_LD"; then
        AC_MSG_RESULT( yes )
        use_ld_ok=yes
    else
        if test -n "$use_ld_fail_if_error"; then
            AC_MSG_ERROR( no )
        else
            AC_MSG_RESULT( no )
        fi
    fi
    if test -n "$use_ld_ok"; then
        dnl keep the value of LDFLAGS
        return 0
    fi
    LDFLAGS="$use_ld_ldflags_save"
    return 1
}
USE_LD=
if test "$enable_ld" != "no"; then
    if test "$GCC" = "yes"; then
        if test -n "$enable_ld"; then
            check_use_ld "$enable_ld" fail_if_error
        elif test -z "$ENABLE_DEBUG$ENABLE_DBGUTIL"; then
            dnl non-debug builds default to the default linker
            true
        elif test -n "$COM_IS_CLANG"; then
            check_use_ld lld
            if test $? -ne 0; then
                check_use_ld gold
            fi
        else
            # For gcc first try gold, new versions also support lld.
            check_use_ld gold
            if test $? -ne 0; then
                check_use_ld lld
            fi
        fi
        ld_output=$(echo 'int main() { return 0; }' | $CC -Wl,-v -x c -o conftest.out - $CFLAGS $LDFLAGS 2>/dev/null)
        rm conftest.out
        ld_used=$(echo "$ld_output" | grep -E '(^GNU gold|^GNU ld|^LLD)')
        if test -z "$ld_used"; then
            ld_used="unknown"
        fi
        AC_MSG_CHECKING([for linker that is used])
        AC_MSG_RESULT([$ld_used])
        if test -n "$ENABLE_DEBUG$ENABLE_DBGUTIL"; then
            if echo "$ld_used" | grep -q "^GNU ld"; then
                AC_MSG_WARN([The default GNU linker is slow, consider using the LLD or the GNU gold linker.])
                add_warning "The default GNU linker is slow, consider using the LLD or the GNU gold linker."
            fi
        fi
    else
        if test "$enable_ld" = "yes"; then
            AC_MSG_ERROR([--enable-ld not supported])
        fi
    fi
fi
AC_SUBST(USE_LD)

HAVE_LD_BSYMBOLIC_FUNCTIONS=
if test "$GCC" = "yes" -a "$_os" != Emscripten ; then
    AC_MSG_CHECKING([for -Bsymbolic-functions linker support])
    bsymbolic_functions_ldflags_save=$LDFLAGS
    LDFLAGS="$LDFLAGS -Wl,-Bsymbolic-functions"
    AC_LINK_IFELSE([AC_LANG_PROGRAM([
#include <stdio.h>
        ],[
printf ("hello world\n");
        ])], HAVE_LD_BSYMBOLIC_FUNCTIONS=TRUE, [])
    if test "$HAVE_LD_BSYMBOLIC_FUNCTIONS" = "TRUE"; then
        AC_MSG_RESULT( found )
    else
        AC_MSG_RESULT( not found )
    fi
    LDFLAGS=$bsymbolic_functions_ldflags_save
fi
AC_SUBST(HAVE_LD_BSYMBOLIC_FUNCTIONS)

LD_GC_SECTIONS=
if test "$GCC" = "yes"; then
    for flag in "--gc-sections" "-dead_strip"; do
        AC_MSG_CHECKING([for $flag linker support])
        ldflags_save=$LDFLAGS
        LDFLAGS="$LDFLAGS -Wl,$flag"
        AC_LINK_IFELSE([AC_LANG_PROGRAM([
#include <stdio.h>
            ],[
printf ("hello world\n");
            ])],[
            LD_GC_SECTIONS="-Wl,$flag"
            AC_MSG_RESULT( found )
            ], [
            AC_MSG_RESULT( not found )
            ])
        LDFLAGS=$ldflags_save
        if test -n "$LD_GC_SECTIONS"; then
            break
        fi
    done
fi
AC_SUBST(LD_GC_SECTIONS)

HAVE_GSPLIT_DWARF=
if test "$enable_split_debug" != no; then
    use_split_debug=
    if test -n "$ENABLE_LTO"; then
        true # Inherently incompatible, since no debug info is created while compiling, GCC complains.
    elif test "$enable_split_debug" = yes; then
        use_split_debug=1
    dnl Currently by default enabled only on Linux, feel free to set test_split_debug above also for other platforms.
    elif test "$test_split_debug" = "yes" -a -n "$ENABLE_DEBUG$ENABLE_DBGUTIL"; then
        use_split_debug=1
    fi
    if test -n "$use_split_debug"; then
        AC_MSG_CHECKING([whether $CC_BASE supports -gsplit-dwarf])
        save_CFLAGS=$CFLAGS
        CFLAGS="$CFLAGS -Werror -gsplit-dwarf"
        AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[ return 0; ]])],[ HAVE_GCC_SPLIT_DWARF=TRUE ],[])
        CFLAGS=$save_CFLAGS
        if test "$HAVE_GCC_SPLIT_DWARF" = "TRUE"; then
            AC_MSG_RESULT([yes])
        else
            if test "$enable_split_debug" = yes; then
                AC_MSG_ERROR([no])
            else
                AC_MSG_RESULT([no])
            fi
        fi
    fi
    if test -z "$HAVE_GCC_SPLIT_DWARF" -a "$test_split_debug" = "yes" -a -n "$use_split_debug"; then
        AC_MSG_WARN([Compiler is not capable of creating split debug info, linking will require more time and disk space.])
        add_warning "Compiler is not capable of creating split debug info, linking will require more time and disk space."
    fi
fi
AC_SUBST(HAVE_GCC_SPLIT_DWARF)

HAVE_CLANG_DEBUG_INFO_KIND_CONSTRUCTOR=
AC_MSG_CHECKING([whether $CC_BASE supports -Xclang -debug-info-kind=constructor])
save_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS -Werror -Xclang -debug-info-kind=constructor"
AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[ return 0; ]])],[ HAVE_CLANG_DEBUG_INFO_KIND_CONSTRUCTOR=TRUE ],[])
CFLAGS=$save_CFLAGS
if test "$HAVE_CLANG_DEBUG_INFO_KIND_CONSTRUCTOR" = "TRUE"; then
    AC_MSG_RESULT([yes])
else
    AC_MSG_RESULT([no])
fi
AC_SUBST(HAVE_CLANG_DEBUG_INFO_KIND_CONSTRUCTOR)

ENABLE_GDB_INDEX=
if test "$enable_gdb_index" != "no"; then
    dnl Currently by default enabled only on Linux, feel free to set test_gdb_index above also for other platforms.
    if test "$enable_gdb_index" = yes -o \( "$test_gdb_index" = "yes" -a -n "$ENABLE_DEBUG$ENABLE_DBGUTIL" \); then
        AC_MSG_CHECKING([whether $CC_BASE supports -ggnu-pubnames])
        save_CFLAGS=$CFLAGS
        CFLAGS="$CFLAGS -Werror -ggnu-pubnames"
        have_ggnu_pubnames=
        AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[ return 0; ]])],[have_ggnu_pubnames=TRUE],[have_ggnu_pubnames=])
        if test "$have_ggnu_pubnames" != "TRUE"; then
            if test "$enable_gdb_index" = "yes"; then
                AC_MSG_ERROR([no, --enable-gdb-index not supported])
            else
                AC_MSG_RESULT( no )
            fi
        else
            AC_MSG_RESULT( yes )
            AC_MSG_CHECKING([whether $CC_BASE supports -Wl,--gdb-index])
            ldflags_save=$LDFLAGS
            LDFLAGS="$LDFLAGS -Wl,--gdb-index"
            AC_LINK_IFELSE([AC_LANG_PROGRAM([
#include <stdio.h>
                ],[
printf ("hello world\n");
                ])], ENABLE_GDB_INDEX=TRUE, [])
            if test "$ENABLE_GDB_INDEX" = "TRUE"; then
                AC_MSG_RESULT( yes )
            else
                if test "$enable_gdb_index" = "yes"; then
                    AC_MSG_ERROR( no )
                else
                    AC_MSG_RESULT( no )
                fi
            fi
            LDFLAGS=$ldflags_save
        fi
        CFLAGS=$save_CFLAGS
        fi
    if test -z "$ENABLE_GDB_INDEX" -a "$test_gdb_index" = "yes" -a -n "$ENABLE_DEBUG$ENABLE_DBGUTIL"; then
        AC_MSG_WARN([Linker is not capable of creating gdb index, debugger startup will be slow.])
        add_warning "Linker is not capable of creating gdb index, debugger startup will be slow."
    fi
fi
AC_SUBST(ENABLE_GDB_INDEX)

if test -z "$enable_sal_log" && test "$ENABLE_DEBUG" = TRUE; then
    enable_sal_log=yes
fi
if test "$enable_sal_log" = yes; then
    ENABLE_SAL_LOG=TRUE
fi
AC_SUBST(ENABLE_SAL_LOG)

dnl Check for enable symbols option
dnl ===================================================================
AC_MSG_CHECKING([whether to generate debug information])
if test -z "$enable_symbols"; then
    if test -n "$ENABLE_DEBUG$ENABLE_DBGUTIL"; then
        enable_symbols=yes
    else
        enable_symbols=no
    fi
fi
if test "$enable_symbols" = yes; then
    ENABLE_SYMBOLS_FOR=all
    AC_MSG_RESULT([yes])
elif test "$enable_symbols" = no; then
    ENABLE_SYMBOLS_FOR=
    AC_MSG_RESULT([no])
else
    # Selective debuginfo.
    ENABLE_SYMBOLS_FOR="$enable_symbols"
    AC_MSG_RESULT([for "$enable_symbols"])
fi
AC_SUBST(ENABLE_SYMBOLS_FOR)

if test -n "$with_android_ndk" -a \( -n "$ENABLE_SYMBOLS" -o -n "$ENABLE_DEBUG" -o -n "$ENABLE_DBGUTIL" \) -a "$ENABLE_DEBUGINFO_FOR" = "all"; then
    # Building on Android with full symbols: without enough memory the linker never finishes currently.
    AC_MSG_CHECKING([whether enough memory is available for linking])
    mem_size=$(grep -o 'MemTotal: *.\+ kB' /proc/meminfo | sed 's/MemTotal: *\(.\+\) kB/\1/')
    # Check for 15GB, as Linux reports a bit less than the physical memory size.
    if test -n "$mem_size" -a $mem_size -lt 15728640; then
        AC_MSG_ERROR([building with full symbols and less than 16GB of memory is not supported])
    else
        AC_MSG_RESULT([yes])
    fi
fi

ENABLE_OPTIMIZED=
ENABLE_OPTIMIZED_DEBUG=
AC_MSG_CHECKING([whether to compile with optimization flags])
if test -z "$enable_optimized"; then
    if test -n "$ENABLE_DEBUG$ENABLE_DBGUTIL"; then
        enable_optimized=no
    else
        enable_optimized=yes
    fi
fi
if test "$enable_optimized" = yes; then
    ENABLE_OPTIMIZED=TRUE
    AC_MSG_RESULT([yes])
elif test "$enable_optimized" = debug; then
    ENABLE_OPTIMIZED_DEBUG=TRUE
    AC_MSG_RESULT([yes (debug)])
    HAVE_GCC_OG=
    if test "$GCC" = "yes" -a "$_os" != "Emscripten"; then
        AC_MSG_CHECKING([whether $CC_BASE supports -Og])
        save_CFLAGS=$CFLAGS
        CFLAGS="$CFLAGS -Werror -Og"
        AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[ return 0; ]])],[ HAVE_GCC_OG=TRUE ],[])
        CFLAGS=$save_CFLAGS
        if test "$HAVE_GCC_OG" = "TRUE"; then
            AC_MSG_RESULT([yes])
        else
            AC_MSG_RESULT([no])
        fi
    fi
    if test -z "$HAVE_GCC_OG" -a "$_os" != "Emscripten"; then
        AC_MSG_ERROR([The compiler does not support optimizations suitable for debugging.])
    fi
else
    AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_OPTIMIZED)
AC_SUBST(ENABLE_OPTIMIZED_DEBUG)

#
# determine CPUNAME, OS, ...
#
case "$host_os" in

aix*)
    COM=GCC
    CPUNAME=POWERPC
    OS=AIX
    RTL_OS=AIX
    RTL_ARCH=PowerPC
    PLATFORMID=aix_powerpc
    P_SEP=:
    ;;

cygwin*|wsl*)
    # Already handled
    ;;

darwin*|macos*)
    COM=GCC
    OS=MACOSX
    RTL_OS=MacOSX
    P_SEP=:

    case "$host_cpu" in
    aarch64|arm64)
        if test "$enable_ios_simulator" = "yes"; then
            OS=iOS
        else
            CPUNAME=AARCH64
            RTL_ARCH=AARCH64
            PLATFORMID=macosx_aarch64
        fi
        ;;
    x86_64)
        if test "$enable_ios_simulator" = "yes"; then
            OS=iOS
        fi
        CPUNAME=X86_64
        RTL_ARCH=X86_64
        PLATFORMID=macosx_x86_64
        ;;
    *)
        AC_MSG_ERROR([Unsupported host_cpu $host_cpu for host_os $host_os])
        ;;
    esac
    ;;

ios*)
    COM=GCC
    OS=iOS
    RTL_OS=iOS
    P_SEP=:

    case "$host_cpu" in
    aarch64|arm64)
        if test "$enable_ios_simulator" = "yes"; then
            AC_MSG_ERROR([iOS simulator is only available in macOS not iOS])
        fi
        ;;
    *)
        AC_MSG_ERROR([Unsupported host_cpu $host_cpu for host_os $host_os])
        ;;
    esac
    CPUNAME=AARCH64
    RTL_ARCH=AARCH64
    PLATFORMID=ios_arm64
    ;;

dragonfly*)
    COM=GCC
    OS=DRAGONFLY
    RTL_OS=DragonFly
    P_SEP=:

    case "$host_cpu" in
    i*86)
        CPUNAME=INTEL
        RTL_ARCH=x86
        PLATFORMID=dragonfly_x86
        ;;
    x86_64)
        CPUNAME=X86_64
        RTL_ARCH=X86_64
        PLATFORMID=dragonfly_x86_64
        ;;
    *)
        AC_MSG_ERROR([Unsupported host_cpu $host_cpu for host_os $host_os])
        ;;
    esac
    ;;

freebsd*)
    COM=GCC
    RTL_OS=FreeBSD
    OS=FREEBSD
    P_SEP=:

    case "$host_cpu" in
    aarch64)
        CPUNAME=AARCH64
        PLATFORMID=freebsd_aarch64
        RTL_ARCH=AARCH64
        ;;
    i*86)
        CPUNAME=INTEL
        RTL_ARCH=x86
        PLATFORMID=freebsd_x86
        ;;
    x86_64|amd64)
        CPUNAME=X86_64
        RTL_ARCH=X86_64
        PLATFORMID=freebsd_x86_64
        ;;
    powerpc64)
        CPUNAME=POWERPC64
        RTL_ARCH=PowerPC_64
        PLATFORMID=freebsd_powerpc64
        ;;
    powerpc|powerpcspe)
        CPUNAME=POWERPC
        RTL_ARCH=PowerPC
        PLATFORMID=freebsd_powerpc
        ;;
    *)
        AC_MSG_ERROR([Unsupported host_cpu $host_cpu for host_os $host_os])
        ;;
    esac
    ;;

haiku*)
    COM=GCC
    GUIBASE=haiku
    RTL_OS=Haiku
    OS=HAIKU
    P_SEP=:

    case "$host_cpu" in
    i*86)
        CPUNAME=INTEL
        RTL_ARCH=x86
        PLATFORMID=haiku_x86
        ;;
    x86_64|amd64)
        CPUNAME=X86_64
        RTL_ARCH=X86_64
        PLATFORMID=haiku_x86_64
        ;;
    *)
        AC_MSG_ERROR([Unsupported host_cpu $host_cpu for host_os $host_os])
        ;;
    esac
    ;;

kfreebsd*)
    COM=GCC
    OS=LINUX
    RTL_OS=kFreeBSD
    P_SEP=:

    case "$host_cpu" in

    i*86)
        CPUNAME=INTEL
        RTL_ARCH=x86
        PLATFORMID=kfreebsd_x86
        ;;
    x86_64)
        CPUNAME=X86_64
        RTL_ARCH=X86_64
        PLATFORMID=kfreebsd_x86_64
        ;;
    *)
        AC_MSG_ERROR([Unsupported host_cpu $host_cpu for host_os $host_os])
        ;;
    esac
    ;;

linux-gnu*|linux-musl*)
    COM=GCC
    OS=LINUX
    RTL_OS=Linux
    P_SEP=:

    case "$host_cpu" in

    aarch64)
        CPUNAME=AARCH64
        PLATFORMID=linux_aarch64
        RTL_ARCH=AARCH64
        EPM_FLAGS="-a arm64"
        ;;
    alpha)
        CPUNAME=AXP
        RTL_ARCH=ALPHA
        PLATFORMID=linux_alpha
        ;;
    arm*)
        CPUNAME=ARM
        EPM_FLAGS="-a arm"
        RTL_ARCH=ARM_EABI
        PLATFORMID=linux_arm_eabi
        case "$host_cpu" in
        arm*-linux)
            RTL_ARCH=ARM_OABI
            PLATFORMID=linux_arm_oabi
            ;;
        esac
        ;;
    hppa)
        CPUNAME=HPPA
        RTL_ARCH=HPPA
        EPM_FLAGS="-a hppa"
        PLATFORMID=linux_hppa
        ;;
    i*86)
        CPUNAME=INTEL
        RTL_ARCH=x86
        PLATFORMID=linux_x86
        ;;
    ia64)
        CPUNAME=IA64
        RTL_ARCH=IA64
        PLATFORMID=linux_ia64
        ;;
    mips)
        CPUNAME=GODSON
        RTL_ARCH=MIPS_EB
        EPM_FLAGS="-a mips"
        PLATFORMID=linux_mips_eb
        ;;
    mips64)
        CPUNAME=GODSON64
        RTL_ARCH=MIPS64_EB
        EPM_FLAGS="-a mips64"
        PLATFORMID=linux_mips64_eb
        ;;
    mips64el)
        CPUNAME=GODSON64
        RTL_ARCH=MIPS64_EL
        EPM_FLAGS="-a mips64el"
        PLATFORMID=linux_mips64_el
        ;;
    mipsel)
        CPUNAME=GODSON
        RTL_ARCH=MIPS_EL
        EPM_FLAGS="-a mipsel"
        PLATFORMID=linux_mips_el
        ;;
    m68k)
        CPUNAME=M68K
        RTL_ARCH=M68K
        PLATFORMID=linux_m68k
        ;;
    powerpc)
        CPUNAME=POWERPC
        RTL_ARCH=PowerPC
        PLATFORMID=linux_powerpc
        ;;
    powerpc64)
        CPUNAME=POWERPC64
        RTL_ARCH=PowerPC_64
        PLATFORMID=linux_powerpc64
        ;;
    powerpc64le)
        CPUNAME=POWERPC64
        RTL_ARCH=PowerPC_64_LE
        PLATFORMID=linux_powerpc64_le
        ;;
    sparc)
        CPUNAME=SPARC
        RTL_ARCH=SPARC
        PLATFORMID=linux_sparc
        ;;
    sparc64)
        CPUNAME=SPARC64
        RTL_ARCH=SPARC64
        PLATFORMID=linux_sparc64
        ;;
    s390)
        CPUNAME=S390
        RTL_ARCH=S390
        PLATFORMID=linux_s390
        ;;
    s390x)
        CPUNAME=S390X
        RTL_ARCH=S390x
        PLATFORMID=linux_s390x
        ;;
    x86_64)
        CPUNAME=X86_64
        RTL_ARCH=X86_64
        PLATFORMID=linux_x86_64
        ;;
    *)
        AC_MSG_ERROR([Unsupported host_cpu $host_cpu for host_os $host_os])
        ;;
    esac
    ;;

linux-android*)
    COM=GCC
    OS=ANDROID
    RTL_OS=Android
    P_SEP=:

    case "$host_cpu" in

    arm|armel)
        CPUNAME=ARM
        RTL_ARCH=ARM_EABI
        PLATFORMID=android_arm_eabi
        ;;
    aarch64)
        CPUNAME=AARCH64
        RTL_ARCH=AARCH64
        PLATFORMID=android_aarch64
        ;;
    i*86)
        CPUNAME=INTEL
        RTL_ARCH=x86
        PLATFORMID=android_x86
        ;;
    x86_64)
        CPUNAME=X86_64
        RTL_ARCH=X86_64
        PLATFORMID=android_x86_64
        ;;
    *)
        AC_MSG_ERROR([Unsupported host_cpu $host_cpu for host_os $host_os])
        ;;
    esac
    ;;

*netbsd*)
    COM=GCC
    OS=NETBSD
    RTL_OS=NetBSD
    P_SEP=:

    case "$host_cpu" in
    i*86)
        CPUNAME=INTEL
        RTL_ARCH=x86
        PLATFORMID=netbsd_x86
        ;;
    powerpc)
        CPUNAME=POWERPC
        RTL_ARCH=PowerPC
        PLATFORMID=netbsd_powerpc
        ;;
    sparc)
        CPUNAME=SPARC
        RTL_ARCH=SPARC
        PLATFORMID=netbsd_sparc
        ;;
    x86_64)
        CPUNAME=X86_64
        RTL_ARCH=X86_64
        PLATFORMID=netbsd_x86_64
        ;;
    *)
        AC_MSG_ERROR([Unsupported host_cpu $host_cpu for host_os $host_os])
        ;;
    esac
    ;;

openbsd*)
    COM=GCC
    OS=OPENBSD
    RTL_OS=OpenBSD
    P_SEP=:

    case "$host_cpu" in
    i*86)
        CPUNAME=INTEL
        RTL_ARCH=x86
        PLATFORMID=openbsd_x86
        ;;
    x86_64)
        CPUNAME=X86_64
        RTL_ARCH=X86_64
        PLATFORMID=openbsd_x86_64
        ;;
    *)
        AC_MSG_ERROR([Unsupported host_cpu $host_cpu for host_os $host_os])
        ;;
    esac
    SOLARINC="$SOLARINC -I/usr/local/include"
    ;;

solaris*)
    COM=GCC
    OS=SOLARIS
    RTL_OS=Solaris
    P_SEP=:

    case "$host_cpu" in
    i*86)
        CPUNAME=INTEL
        RTL_ARCH=x86
        PLATFORMID=solaris_x86
        ;;
    sparc)
        CPUNAME=SPARC
        RTL_ARCH=SPARC
        PLATFORMID=solaris_sparc
        ;;
    sparc64)
        CPUNAME=SPARC64
        RTL_ARCH=SPARC64
        PLATFORMID=solaris_sparc64
        ;;
    *)
        AC_MSG_ERROR([Unsupported host_cpu $host_cpu for host_os $host_os])
        ;;
    esac
    SOLARINC="$SOLARINC -I/usr/local/include"
    ;;

emscripten*)
    COM=GCC
    OS=EMSCRIPTEN
    RTL_OS=Emscripten
    P_SEP=:

    case "$host_cpu" in
    wasm32|wasm64)
        ;;
    *)
        AC_MSG_ERROR([Unsupported host_cpu $host_cpu for host_os $host_os])
        ;;
    esac
    CPUNAME=INTEL
    RTL_ARCH=x86
    PLATFORMID=linux_x86
    ;;

*)
    AC_MSG_ERROR([$host_os operating system is not suitable to build LibreOffice for!])
    ;;
esac

DISABLE_GUI=""
if test "$enable_gui" = "no"; then
    if test "$using_x11" != yes; then
        AC_MSG_ERROR([$host_os operating system is not suitable to build LibreOffice with --disable-gui.])
    fi
    USING_X11=
    DISABLE_GUI=TRUE
else
    AC_DEFINE(HAVE_FEATURE_UI)
fi
AC_SUBST(DISABLE_GUI)

if test "$with_x" = "no"; then
    USING_X11=
fi

if test "$using_x11" = yes; then
    if test "$USING_X11" = TRUE; then
        AC_DEFINE(USING_X11)
    else
        disable_x11_tests
    fi
else
    if test "$USING_X11" = TRUE; then
        AC_MSG_ERROR([Platform doesn't support X11 (\$using_x11), but \$USING_X11 is set!])
    fi
fi

WORKDIR="${BUILDDIR}/workdir"
INSTDIR="${BUILDDIR}/instdir"
INSTROOTBASE=${INSTDIR}${INSTROOTBASESUFFIX}
INSTROOT=${INSTROOTBASE}${INSTROOTCONTENTSUFFIX}
SOLARINC="-I$SRC_ROOT/include $SOLARINC"
AC_SUBST(COM)
AC_SUBST(CPUNAME)
AC_SUBST(RTL_OS)
AC_SUBST(RTL_ARCH)
AC_SUBST(EPM_FLAGS)
AC_SUBST(USING_X11)
AC_SUBST([INSTDIR])
AC_SUBST([INSTROOT])
AC_SUBST([INSTROOTBASE])
AC_SUBST(OS)
AC_SUBST(P_SEP)
AC_SUBST(WORKDIR)
AC_SUBST(PLATFORMID)
AC_SUBST(WINDOWS_X64)
AC_DEFINE_UNQUOTED(WORKDIR,"$WORKDIR")

if test "$OS" = WNT -a "$COM" = MSC; then
    case "$CPUNAME" in
    INTEL) CPPU_ENV=msci ;;
    X86_64) CPPU_ENV=mscx ;;
    AARCH64) CPPU_ENV=msca ;;
    *)
        AC_MSG_ERROR([Unknown \$CPUNAME '$CPUNAME' for $OS / $COM"])
        ;;
    esac
else
    CPPU_ENV=gcc3
fi
AC_SUBST(CPPU_ENV)

dnl ===================================================================
dnl Test which package format to use
dnl ===================================================================
AC_MSG_CHECKING([which package format to use])
if test -n "$with_package_format" -a "$with_package_format" != no; then
    for i in $with_package_format; do
        case "$i" in
        aix | bsd | deb | pkg | rpm | archive | dmg | installed | msi)
            ;;
        *)
            AC_MSG_ERROR([unsupported format $i. Supported by EPM are:
aix - AIX software distribution
bsd - FreeBSD, NetBSD, or OpenBSD software distribution
deb - Debian software distribution
pkg - Solaris software distribution
rpm - RedHat software distribution

LibreOffice additionally supports:
archive - .tar.gz or .zip
dmg - macOS .dmg
installed - installation tree
msi - Windows .msi
        ])
            ;;
        esac
    done
    # fakeroot is needed to ensure correct file ownerships/permissions
    # inside deb packages and tar archives created on Linux and Solaris.
    if test "$OS" = "LINUX" || test "$OS" = "SOLARIS"; then
        AC_PATH_PROG(FAKEROOT, fakeroot, no)
        if test "$FAKEROOT" = "no"; then
            AC_MSG_ERROR(
                [--with-package-format='$with_package_format' requires fakeroot. Install fakeroot.])
        fi
    fi
    PKGFORMAT="$with_package_format"
    AC_MSG_RESULT([$PKGFORMAT])
else
    PKGFORMAT=
    AC_MSG_RESULT([none])
fi
AC_SUBST(PKGFORMAT)

dnl ===================================================================
dnl handle help related options
dnl
dnl If you change help related options, please update README.help
dnl ===================================================================

ENABLE_HTMLHELP=
HELP_OMINDEX_PAGE=
HELP_ONLINE=
WITH_HELPPACKS=

AC_MSG_CHECKING([which help to build])
if test -n "$with_help" -a "$with_help" != "no"; then
    GIT_NEEDED_SUBMODULES="helpcontent2 $GIT_NEEDED_SUBMODULES"
    BUILD_TYPE="$BUILD_TYPE HELP"
    case "$with_help" in
    "html")
        ENABLE_HTMLHELP=TRUE
        WITH_HELPPACKS=TRUE
        SCPDEFS="$SCPDEFS -DWITH_HELPPACKS"
        AC_MSG_RESULT([HTML (local)])
        ;;
    "online")
        ENABLE_HTMLHELP=TRUE
        HELP_ONLINE=TRUE
        AC_MSG_RESULT([HTML (online)])
        ;;
    yes)
        WITH_HELPPACKS=TRUE
        SCPDEFS="$SCPDEFS -DWITH_HELPPACKS"
        AC_MSG_RESULT([XML (local)])
        ;;
    *)
        AC_MSG_ERROR([Unknown --with-help=$with_help])
        ;;
    esac
else
    AC_MSG_RESULT([no])
fi

AC_MSG_CHECKING([if we need to build the help index tooling])
if test "$with_help" = yes -o "$enable_extension_integration" != no; then
    BUILD_TYPE="$BUILD_TYPE HELPTOOLS"
    AC_MSG_RESULT([yes])
else
    AC_MSG_RESULT([no])
fi

AC_MSG_CHECKING([whether to enable xapian-omega support for online help])
if test -n "$with_omindex" -a "$with_omindex" != "no"; then
    if test "$HELP_ONLINE" != TRUE; then
        AC_MSG_ERROR([Can't build xapian-omega index without --help=online])
    fi
    case "$with_omindex" in
    "server")
        HELP_OMINDEX_PAGE=TRUE
        AC_MSG_RESULT([SERVER])
        ;;
    "noxap")
        AC_MSG_RESULT([NOXAP])
        ;;
    *)
        AC_MSG_ERROR([Unknown --with-omindex=$with_omindex])
        ;;
    esac
else
    AC_MSG_RESULT([no])
fi

AC_MSG_CHECKING([whether to include the XML-help support])
if test "$enable_xmlhelp" = yes; then
    BUILD_TYPE="$BUILD_TYPE XMLHELP"
    AC_DEFINE(HAVE_FEATURE_XMLHELP)
    AC_MSG_RESULT([yes])
else
    if test "$with_help" = yes; then
        add_warning "Building the XML help, but LO with disabled xmlhelp support. Generated help can't be accessed from this LO build!"
    fi
    AC_MSG_RESULT([no])
fi

dnl Test whether to integrate helppacks into the product's installer
AC_MSG_CHECKING([for helppack integration])
if test -z "$WITH_HELPPACKS" -o "$with_helppack_integration" = no; then
    AC_MSG_RESULT([no integration])
else
    SCPDEFS="$SCPDEFS -DWITH_HELPPACK_INTEGRATION"
    AC_MSG_RESULT([integration])
fi

AC_SUBST([ENABLE_HTMLHELP])
AC_SUBST([HELP_OMINDEX_PAGE])
AC_SUBST([HELP_ONLINE])
# WITH_HELPPACKS is used only in configure

dnl ===================================================================
dnl Set up a different compiler to produce tools to run on the build
dnl machine when doing cross-compilation
dnl ===================================================================

m4_pattern_allow([PKG_CONFIG_FOR_BUILD])
m4_pattern_allow([PKG_CONFIG_LIBDIR])
if test "$cross_compiling" = "yes"; then
    AC_MSG_CHECKING([for BUILD platform configuration])
    echo
    rm -rf CONF-FOR-BUILD config_build.mk
    mkdir CONF-FOR-BUILD
    # Here must be listed all files needed when running the configure script. In particular, also
    # those expanded by the AC_CONFIG_FILES() call near the end of this configure.ac. For clarity,
    # keep them in the same order as there.
    (cd $SRC_ROOT && tar cf - \
        config.guess \
        bin/get_config_variables \
        solenv/bin/getcompver.awk \
        solenv/inc/langlist.mk \
        download.lst \
        config_host.mk.in \
        config_host_lang.mk.in \
        Makefile.in \
        bin/bffvalidator.sh.in \
        bin/odfvalidator.sh.in \
        bin/officeotron.sh.in \
        hardened_runtime.xcent.in \
        instsetoo_native/util/openoffice.lst.in \
        config_host/*.in \
        sysui/desktop/macosx/Info.plist.in \
        .vscode/vs-code-template.code-workspace.in \
        solenv/lockfile/autoconf.h.in \
        ) \
    | (cd CONF-FOR-BUILD && tar xf -)
    cp configure CONF-FOR-BUILD
    test -d config_build && cp -p config_build/*.h CONF-FOR-BUILD/config_host 2>/dev/null
    (
    unset COM USING_X11 OS CPUNAME
    unset CC CXX SYSBASE CFLAGS
    unset AR LD NM OBJDUMP PKG_CONFIG RANLIB READELF STRIP
    unset CPPUNIT_CFLAGS CPPUNIT_LIBS
    unset LIBXML_CFLAGS LIBXML_LIBS LIBXSLT_CFLAGS LIBXSLT_LIBS XSLTPROC
    unset PKG_CONFIG_LIBDIR PKG_CONFIG_PATH
    if test -n "$CC_FOR_BUILD"; then
        export CC="$CC_FOR_BUILD"
        CC_BASE=`first_arg_basename "$CC"`
    fi
    if test -n "$CXX_FOR_BUILD"; then
        export CXX="$CXX_FOR_BUILD"
        CXX_BASE=`first_arg_basename "$CXX"`
    fi
    test -n "$PKG_CONFIG_FOR_BUILD" && export PKG_CONFIG="$PKG_CONFIG_FOR_BUILD"
    cd CONF-FOR-BUILD

    # Handle host configuration, which affects the cross-toolset too
    sub_conf_opts=""
    test -n "$enable_ccache" && sub_conf_opts="$sub_conf_opts --enable-ccache=$enable_ccache"
    test -n "$with_ant_home" && sub_conf_opts="$sub_conf_opts --with-ant-home=$with_ant_home"
    test "$with_junit" = "no" && sub_conf_opts="$sub_conf_opts --without-junit"
    # While we don't need scripting support, we don't have a PYTHON_FOR_BUILD Java equivalent, so must enable scripting for Java
    if test -n "$ENABLE_JAVA"; then
        case "$_os" in
        Android)
            # Hack for Android - the build doesn't need a host JDK, so just forward to build for convenience
            test -n "$with_jdk_home" && sub_conf_opts="$sub_conf_opts --with-jdk-home=$with_jdk_home"
            ;;
        *)
            if test -z "$with_jdk_home"; then
                AC_MSG_ERROR([Missing host JDK! This can't be detected for the build OS, so you have to specify it with --with-jdk-home.])
            fi
            ;;
        esac
    else
        sub_conf_opts="$sub_conf_opts --disable-scripting"
    fi
    test -n "$TARFILE_LOCATION" && sub_conf_opts="$sub_conf_opts --with-external-tar=$TARFILE_LOCATION"
    test "$with_system_icu_for_build" = "yes" -o "$with_system_icu_for_build" = "force" && sub_conf_opts="$sub_conf_opts --with-system-icu"
    test "$with_galleries" = "no" -o -z "$WITH_GALLERY_BUILD" && sub_conf_opts="$sub_conf_opts --with-galleries=no --disable-database-connectivity"
    test -n "$with_help" -a "$with_help" != "no" && sub_conf_opts="$sub_conf_opts --with-help=$with_help"
    test "$enable_extensions" = yes || sub_conf_opts="$sub_conf_opts --disable-extensions"
    test "$enable_wasm_strip" = "yes" && sub_conf_opts="$sub_conf_opts --enable-wasm-strip"
    test "${with_system_lockfile+set}" = set && sub_conf_opts="$sub_conf_opts --with-system-lockfile=${with_system_lockfile}"

    # Don't bother having configure look for stuff not needed for the build platform anyway
    sub_conf_defaults=" \
        --build="$build_alias" \
        --disable-cairo-canvas \
        --disable-cups \
        --disable-firebird-sdbc \
        --disable-gpgmepp \
        --disable-gstreamer-1-0 \
        --disable-gtk3 \
        --disable-gtk4 \
        --disable-mariadb-sdbc \
        --disable-nss \
        --disable-online-update \
        --disable-opencl \
        --disable-pdfimport \
        --disable-postgresql-sdbc \
        --disable-services-rdb-from-build \
        --disable-skia \
        --enable-icecream="$enable_icecream" \
        --without-doxygen \
        --without-webdav \
        --without-x \
        --with-parallelism="$with_parallelism" \
        --with-theme="$with_theme" \
        --with-tls=openssl \
"
    echo "    Running CONF-FOR-BUILD/configure" $sub_conf_defaults $sub_conf_opts $with_build_platform_configure_options --srcdir=$srcdir
    ./configure \
        $sub_conf_defaults \
        $sub_conf_opts \
        $with_build_platform_configure_options \
        --srcdir=$srcdir \
        2>&1 | sed -e 's/^/    /'
    if test [${PIPESTATUS[0]}] -ne 0; then
        AC_MSG_ERROR([Running the configure script for BUILD side failed, see CONF-FOR-BUILD/config.log])
    fi

    # filter permitted build targets
    PERMITTED_BUILD_TARGETS="
        AVMEDIA
        BOOST
        CAIRO
        CLUCENE
        CUCKOO
        CURL
        DBCONNECTIVITY
        DESKTOP
        DYNLOADING
        EPOXY
        EXPAT
        GLM
        GRAPHITE
        HARFBUZZ
        HELPTOOLS
        ICU
        LCMS2
        LIBJPEG_TURBO
        LIBLANGTAG
        LibO
        LIBFFI
        LIBPN
        LIBXML2
        LIBXSLT
        MDDS
        NATIVE
        OPENSSL
        ORCUS
        PYTHON
        ZLIB
"
    # converts BUILD_TYPE and PERMITTED_BUILD_TARGETS into non-whitespace,
    # newlined lists, to use grep as a filter
    PERMITTED_BUILD_TARGETS=$(echo "$PERMITTED_BUILD_TARGETS" | sed -e '/^ *$/d' -e 's/ *//')
    BUILD_TARGETS="$(sed -n -e '/^export BUILD_TYPE=/ s/.*=//p' config_host.mk | tr ' ' '\n')"
    BUILD_TARGETS="$(echo "$BUILD_TARGETS" | grep -F "$PERMITTED_BUILD_TARGETS" | tr '\n' ' ')"
    sed -i -e "s/ BUILD_TYPE=.*$/ BUILD_TYPE=$BUILD_TARGETS/" config_host.mk

    cp config_host.mk ../config_build.mk
    cp config_host_lang.mk ../config_build_lang.mk
    mv config.log ../config.Build.log
    mkdir -p ../config_build
    mv config_host/*.h ../config_build
    test -f "$WARNINGS_FILE" && mv "$WARNINGS_FILE" "../$WARNINGS_FILE_FOR_BUILD"

    # all these will get a _FOR_BUILD postfix
    DIRECT_FOR_BUILD_SETTINGS="
        CC
        CPPU_ENV
        CXX
        ILIB
        JAVA_HOME
        JAVAIFLAGS
        JDK
        LIBO_BIN_FOLDER
        LIBO_LIB_FOLDER
        LIBO_URE_LIB_FOLDER
        LIBO_URE_MISC_FOLDER
        OS
        SDKDIRNAME
        SYSTEM_LIBXML
        SYSTEM_LIBXSLT
"
    # these overwrite host config with build config
    OVERWRITING_SETTINGS="
        ANT
        ANT_HOME
        ANT_LIB
        HSQLDB_USE_JDBC_4_1
        JAVA_CLASSPATH_NOT_SET
        JAVA_SOURCE_VER
        JAVA_TARGET_VER
        JAVACFLAGS
        JAVACOMPILER
        JAVADOC
        JAVADOCISGJDOC
        LOCKFILE
"
    # these need some special handling
    EXTRA_HANDLED_SETTINGS="
        INSTDIR
        INSTROOT
        PATH
        WORKDIR
"
    OLD_PATH=$PATH
    . ./bin/get_config_variables $DIRECT_FOR_BUILD_SETTINGS $OVERWRITING_SETTINGS $EXTRA_HANDLED_SETTINGS
    BUILD_PATH=$PATH
    PATH=$OLD_PATH

    line=`echo "LO_PATH_FOR_BUILD='${BUILD_PATH}'" | sed -e 's,/CONF-FOR-BUILD,,g'`
    echo "$line" >>build-config

    for V in $DIRECT_FOR_BUILD_SETTINGS; do
        VV='$'$V
        VV=`eval "echo $VV"`
        if test -n "$VV"; then
            line=${V}_FOR_BUILD='${'${V}_FOR_BUILD:-$VV'}'
            echo "$line" >>build-config
        fi
    done

    for V in $OVERWRITING_SETTINGS; do
        VV='$'$V
        VV=`eval "echo $VV"`
        if test -n "$VV"; then
            line=${V}='${'${V}:-$VV'}'
            echo "$line" >>build-config
        fi
    done

    for V in INSTDIR INSTROOT WORKDIR; do
        VV='$'$V
        VV=`eval "echo $VV"`
        VV=`echo $VV | sed -e "s,/CONF-FOR-BUILD/\([[a-z]]*\),/\1_for_build,g"`
        if test -n "$VV"; then
            line="${V}_FOR_BUILD='$VV'"
            echo "$line" >>build-config
        fi
    done

    )
    test -f CONF-FOR-BUILD/build-config || AC_MSG_ERROR([setup/configure for BUILD side failed, see CONF-FOR-BUILD/config.log])
    test -f config_build.mk || AC_MSG_ERROR([A file called config_build.mk was supposed to have been copied here, but it isn't found])
    perl -pi -e 's,/(workdir|instdir)(/|$),/\1_for_build\2,g;' \
             -e 's,/CONF-FOR-BUILD,,g;' config_build.mk

    eval `cat CONF-FOR-BUILD/build-config`

    AC_MSG_RESULT([checking for BUILD platform configuration... done])

    rm -rf CONF-FOR-BUILD
else
    OS_FOR_BUILD="$OS"
    CC_FOR_BUILD="$CC"
    CPPU_ENV_FOR_BUILD="$CPPU_ENV"
    CXX_FOR_BUILD="$CXX"
    INSTDIR_FOR_BUILD="$INSTDIR"
    INSTROOT_FOR_BUILD="$INSTROOT"
    LIBO_BIN_FOLDER_FOR_BUILD="$LIBO_BIN_FOLDER"
    LIBO_LIB_FOLDER_FOR_BUILD="$LIBO_LIB_FOLDER"
    LIBO_URE_LIB_FOLDER_FOR_BUILD="$LIBO_URE_LIB_FOLDER"
    LIBO_URE_MISC_FOLDER_FOR_BUILD="$LIBO_URE_MISC_FOLDER"
    SDKDIRNAME_FOR_BUILD="$SDKDIRNAME"
    WORKDIR_FOR_BUILD="$WORKDIR"
fi
AC_SUBST(OS_FOR_BUILD)
AC_SUBST(INSTDIR_FOR_BUILD)
AC_SUBST(INSTROOT_FOR_BUILD)
AC_SUBST(LIBO_BIN_FOLDER_FOR_BUILD)
AC_SUBST(LIBO_LIB_FOLDER_FOR_BUILD)
AC_SUBST(LIBO_URE_LIB_FOLDER_FOR_BUILD)
AC_SUBST(LIBO_URE_MISC_FOLDER_FOR_BUILD)
AC_SUBST(SDKDIRNAME_FOR_BUILD)
AC_SUBST(WORKDIR_FOR_BUILD)
AC_SUBST(CC_FOR_BUILD)
AC_SUBST(CXX_FOR_BUILD)
AC_SUBST(CPPU_ENV_FOR_BUILD)

dnl ===================================================================
dnl Check for lockfile deps
dnl ===================================================================
if test -z "$CROSS_COMPILING"; then
    test -n "$LOCKFILE" -a "${with_system_lockfile+set}" != set && with_system_lockfile="$LOCKFILE"
    test "${with_system_lockfile+set}" = set || with_system_lockfile=no
    AC_MSG_CHECKING([which lockfile binary to use])
    case "$with_system_lockfile" in
    yes)
        AC_MSG_RESULT([external])
        AC_PATH_PROGS([LOCKFILE],[dotlockfile lockfile])
        ;;
    no)
        AC_MSG_RESULT([internal])
        ;;
    *)
        if test -x "$with_system_lockfile"; then
            LOCKFILE="$with_system_lockfile"
        else
            AC_MSG_ERROR(['$with_system_lockfile' is not executable.])
        fi
        AC_MSG_RESULT([$with_system_lockfile])
        ;;
    esac
fi

if test -n "$LOCKFILE" -a "$DISABLE_DYNLOADING" = TRUE; then
    add_warning "The default system lockfile has increasing poll intervals up to 60s, so linking executables may be delayed."
fi

AC_CHECK_HEADERS([getopt.h paths.h sys/param.h])
AC_CHECK_FUNCS([utime utimes])
AC_SUBST(LOCKFILE)

dnl ===================================================================
dnl Check for syslog header
dnl ===================================================================
AC_CHECK_HEADER(syslog.h, AC_DEFINE(HAVE_SYSLOG_H))

dnl Set the ENABLE_WERROR variable. (Activate --enable-werror)
dnl ===================================================================
AC_MSG_CHECKING([whether to turn warnings to errors])
if test -n "$enable_werror" -a "$enable_werror" != "no"; then
    ENABLE_WERROR="TRUE"
    PYTHONWARNINGS="error"
    AC_MSG_RESULT([yes])
else
    if test -n "$LODE_HOME" -a -z "$enable_werror"; then
        ENABLE_WERROR="TRUE"
        PYTHONWARNINGS="error"
        AC_MSG_RESULT([yes])
    else
        AC_MSG_RESULT([no])
    fi
fi
AC_SUBST(ENABLE_WERROR)
AC_SUBST(PYTHONWARNINGS)

dnl Check for --enable-assert-always-abort, set ASSERT_ALWAYS_ABORT
dnl ===================================================================
AC_MSG_CHECKING([whether to have assert() failures abort even without --enable-debug])
if test -z "$enable_assert_always_abort"; then
   if test "$ENABLE_DEBUG" = TRUE; then
       enable_assert_always_abort=yes
   else
       enable_assert_always_abort=no
   fi
fi
if test "$enable_assert_always_abort" = "yes"; then
    ASSERT_ALWAYS_ABORT="TRUE"
    AC_MSG_RESULT([yes])
else
    ASSERT_ALWAYS_ABORT="FALSE"
    AC_MSG_RESULT([no])
fi
AC_SUBST(ASSERT_ALWAYS_ABORT)

# Determine whether to use ooenv for the instdir installation
# ===================================================================
if test $_os != "WINNT" -a $_os != "Darwin"; then
    AC_MSG_CHECKING([whether to use ooenv for the instdir installation])
    if test -z "$enable_ooenv"; then
        if test -n "$ENABLE_DEBUG$ENABLE_DBGUTIL"; then
            enable_ooenv=yes
        else
            enable_ooenv=no
        fi
    fi
    if test "$enable_ooenv" = "no"; then
        AC_MSG_RESULT([no])
    else
        ENABLE_OOENV="TRUE"
        AC_MSG_RESULT([yes])
    fi
fi
AC_SUBST(ENABLE_OOENV)

if test "$test_kf5" = "yes" -a "$enable_kf5" = "yes"; then
    if test "$enable_qt5" = "no"; then
        AC_MSG_ERROR([KF5 support depends on QT5, so it conflicts with --disable-qt5])
    else
        enable_qt5=yes
    fi
fi

dnl ===================================================================
dnl check for cups support
dnl ===================================================================

AC_MSG_CHECKING([whether to enable CUPS support])
if test "$test_cups" = yes -a "$enable_cups" != no; then
    ENABLE_CUPS=TRUE
    AC_MSG_RESULT([yes])

    AC_MSG_CHECKING([whether cups support is present])
    AC_CHECK_LIB([cups], [cupsPrintFiles], [:])
    AC_CHECK_HEADER(cups/cups.h, AC_DEFINE(HAVE_CUPS_H))
    if test "$ac_cv_lib_cups_cupsPrintFiles" != "yes" -o "$ac_cv_header_cups_cups_h" != "yes"; then
        AC_MSG_ERROR([Could not find CUPS. Install libcups2-dev or cups-devel.])
    fi
else
    AC_MSG_RESULT([no])
fi

AC_SUBST(ENABLE_CUPS)

# fontconfig checks
if test "$using_freetype_fontconfig" = yes; then
    AC_MSG_CHECKING([which fontconfig to use])
fi
if test "$using_freetype_fontconfig" = yes -a "$test_system_fontconfig" != no; then
    AC_MSG_RESULT([external])
    PKG_CHECK_MODULES([FONTCONFIG], [fontconfig >= 2.4.1])
    SYSTEM_FONTCONFIG=TRUE
    FilterLibs "${FONTCONFIG_LIBS}"
    FONTCONFIG_LIBS="${filteredlibs}"
elif test "$using_freetype_fontconfig" = yes; then
    AC_MSG_RESULT([internal])
    BUILD_TYPE="$BUILD_TYPE FONTCONFIG"
fi
AC_SUBST(FONTCONFIG_CFLAGS)
AC_SUBST(FONTCONFIG_LIBS)
AC_SUBST([SYSTEM_FONTCONFIG])

dnl whether to find & fetch external tarballs?
dnl ===================================================================
if test -z "$TARFILE_LOCATION" -a -n "$LODE_HOME" ; then
   if test "$GNUMAKE_WIN_NATIVE" = "TRUE" ; then
       TARFILE_LOCATION="`cygpath -m $LODE_HOME/ext_tar`"
   else
       TARFILE_LOCATION="$LODE_HOME/ext_tar"
   fi
fi
if test -z "$TARFILE_LOCATION"; then
    if test -d "$SRC_ROOT/src" ; then
        mv "$SRC_ROOT/src" "$SRC_ROOT/external/tarballs"
        ln -s "$SRC_ROOT/external/tarballs" "$SRC_ROOT/src"
    fi
    TARFILE_LOCATION="$SRC_ROOT/external/tarballs"
else
    AbsolutePath "$TARFILE_LOCATION"
    PathFormat "${absolute_path}"
    TARFILE_LOCATION="${formatted_path}"
fi
AC_SUBST(TARFILE_LOCATION)

AC_MSG_CHECKING([whether we want to fetch tarballs])
if test "$enable_fetch_external" != "no"; then
    if test "$with_all_tarballs" = "yes"; then
        AC_MSG_RESULT([yes, all of them])
        DO_FETCH_TARBALLS="ALL"
    else
        AC_MSG_RESULT([yes, if we use them])
        DO_FETCH_TARBALLS="TRUE"
    fi
else
    AC_MSG_RESULT([no])
    DO_FETCH_TARBALLS=
fi
AC_SUBST(DO_FETCH_TARBALLS)

dnl Test whether to include MySpell dictionaries
dnl ===================================================================
AC_MSG_CHECKING([whether to include MySpell dictionaries])
if test "$with_myspell_dicts" = "yes"; then
    AC_MSG_RESULT([yes])
    WITH_MYSPELL_DICTS=TRUE
    BUILD_TYPE="$BUILD_TYPE DICTIONARIES"
    GIT_NEEDED_SUBMODULES="dictionaries $GIT_NEEDED_SUBMODULES"
else
    AC_MSG_RESULT([no])
    WITH_MYSPELL_DICTS=
fi
AC_SUBST(WITH_MYSPELL_DICTS)

# There are no "system" myspell, hyphen or mythes dictionaries on macOS, Windows, Android or iOS.
if test $_os = Darwin -o $_os = WINNT -o $_os = iOS -o $_os = Android; then
    if test "$with_system_dicts" = yes; then
        AC_MSG_ERROR([There are no system dicts on this OS in the formats the 3rd-party libs we use expect]);
    fi
    with_system_dicts=no
fi

AC_MSG_CHECKING([whether to use dicts from external paths])
if test -z "$with_system_dicts" -o "$with_system_dicts" != "no"; then
    AC_MSG_RESULT([yes])
    SYSTEM_DICTS=TRUE
    AC_MSG_CHECKING([for spelling dictionary directory])
    if test -n "$with_external_dict_dir"; then
        DICT_SYSTEM_DIR=file://$with_external_dict_dir
    else
        DICT_SYSTEM_DIR=file:///usr/share/hunspell
        if test ! -d /usr/share/hunspell -a -d /usr/share/myspell; then
            DICT_SYSTEM_DIR=file:///usr/share/myspell
        fi
    fi
    AC_MSG_RESULT([$DICT_SYSTEM_DIR])
    AC_MSG_CHECKING([for hyphenation patterns directory])
    if test -n "$with_external_hyph_dir"; then
        HYPH_SYSTEM_DIR=file://$with_external_hyph_dir
    else
        HYPH_SYSTEM_DIR=file:///usr/share/hyphen
    fi
    AC_MSG_RESULT([$HYPH_SYSTEM_DIR])
    AC_MSG_CHECKING([for thesaurus directory])
    if test -n "$with_external_thes_dir"; then
        THES_SYSTEM_DIR=file://$with_external_thes_dir
    else
        THES_SYSTEM_DIR=file:///usr/share/mythes
    fi
    AC_MSG_RESULT([$THES_SYSTEM_DIR])
else
    AC_MSG_RESULT([no])
    SYSTEM_DICTS=
fi
AC_SUBST(SYSTEM_DICTS)
AC_SUBST(DICT_SYSTEM_DIR)
AC_SUBST(HYPH_SYSTEM_DIR)
AC_SUBST(THES_SYSTEM_DIR)

dnl ===================================================================
dnl Precompiled headers.
ENABLE_PCH=""
AC_MSG_CHECKING([whether to enable pch feature])
if test -z "$enable_pch"; then
    if test "$_os" = "WINNT"; then
        # Enabled by default on Windows.
        enable_pch=yes
        # never use sccache on auto-enabled PCH builds, except if requested explicitly
        if test -z "$enable_ccache" -a "$SCCACHE"; then
            CCACHE=""
        fi
    else
        enable_pch=no
    fi
fi
if test "$enable_pch" != "no" -a "$_os" != "WINNT" -a "$GCC" != "yes" ; then
    AC_MSG_ERROR([Precompiled header not yet supported for your platform/compiler])
fi
if test "$enable_pch" = "system"; then
    ENABLE_PCH="1"
    AC_MSG_RESULT([yes (system headers)])
elif test "$enable_pch" = "base"; then
    ENABLE_PCH="2"
    AC_MSG_RESULT([yes (system and base headers)])
elif test "$enable_pch" = "normal"; then
    ENABLE_PCH="3"
    AC_MSG_RESULT([yes (normal)])
elif test "$enable_pch" = "full"; then
    ENABLE_PCH="4"
    AC_MSG_RESULT([yes (full)])
elif test "$enable_pch" = "yes"; then
    # Pick a suitable default.
    if test "$GCC" = "yes"; then
        # With Clang and GCC higher levels do not seem to make a noticeable improvement,
        # while making the PCHs larger and rebuilds more likely.
        ENABLE_PCH="2"
        AC_MSG_RESULT([yes (system and base headers)])
    else
        # With MSVC the highest level makes a significant difference,
        # and it was the default when there used to be no PCH levels.
        ENABLE_PCH="4"
        AC_MSG_RESULT([yes (full)])
    fi
elif test "$enable_pch" = "no"; then
    AC_MSG_RESULT([no])
else
    AC_MSG_ERROR([Unknown value for --enable-pch])
fi
AC_SUBST(ENABLE_PCH)
# ccache 3.7.1 and older do not properly detect/handle -include .gch in CCACHE_DEPEND mode
if test -n "$ENABLE_PCH" -a -n "$CCACHE_DEPEND_MODE" -a "$GCC" = "yes" -a "$COM_IS_CLANG" != "TRUE"; then
    AC_PATH_PROG([CCACHE_BIN],[ccache],[not found])
    if test "$CCACHE_BIN" != "not found"; then
        AC_MSG_CHECKING([ccache version])
        CCACHE_VERSION=`"$CCACHE_BIN" -V | "$AWK" '/^ccache version/{print $3}'`
        CCACHE_NUMVER=`echo $CCACHE_VERSION | $AWK -F. '{ print \$1*10000+\$2*100+\$3 }'`
        AC_MSG_RESULT([$CCACHE_VERSION])
        AC_MSG_CHECKING([whether ccache depend mode works properly with GCC PCH])
        if test "$CCACHE_NUMVER" -gt "030701"; then
            AC_MSG_RESULT([yes])
        else
            AC_MSG_RESULT([no (not newer than 3.7.1)])
            CCACHE_DEPEND_MODE=
        fi
    fi
fi

PCH_INSTANTIATE_TEMPLATES=
if test -n "$ENABLE_PCH"; then
    AC_MSG_CHECKING([whether $CC supports -fpch-instantiate-templates])
    save_CFLAGS=$CFLAGS
    CFLAGS="$CFLAGS -Werror -fpch-instantiate-templates"
    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[ return 0; ]])],[ PCH_INSTANTIATE_TEMPLATES="-fpch-instantiate-templates" ],[])
    CFLAGS=$save_CFLAGS
    if test -n "$PCH_INSTANTIATE_TEMPLATES"; then
        AC_MSG_RESULT(yes)
    else
        AC_MSG_RESULT(no)
    fi
fi
AC_SUBST(PCH_INSTANTIATE_TEMPLATES)

BUILDING_PCH_WITH_OBJ=
if test -n "$ENABLE_PCH"; then
    AC_MSG_CHECKING([whether $CC supports -Xclang -building-pch-with-obj])
    save_CFLAGS=$CFLAGS
    CFLAGS="$CFLAGS -Werror -Xclang -building-pch-with-obj"
    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[ return 0; ]])],[ BUILDING_PCH_WITH_OBJ="-Xclang -building-pch-with-obj" ],[])
    CFLAGS=$save_CFLAGS
    if test -n "$BUILDING_PCH_WITH_OBJ"; then
        AC_MSG_RESULT(yes)
    else
        AC_MSG_RESULT(no)
    fi
fi
AC_SUBST(BUILDING_PCH_WITH_OBJ)

PCH_CODEGEN=
PCH_NO_CODEGEN=
fpch_prefix=
if test "$COM" = MSC; then
    fpch_prefix="-Xclang "
fi
if test -n "$BUILDING_PCH_WITH_OBJ"; then
    AC_MSG_CHECKING([whether $CC supports ${fpch_prefix}-fpch-codegen])
    save_CFLAGS=$CFLAGS
    CFLAGS="$CFLAGS -Werror ${fpch_prefix}-fpch-codegen"
    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[ return 0; ]])],
        [ PCH_CODEGEN="${fpch_prefix}-fpch-codegen" ],[])
    CFLAGS=$save_CFLAGS
    CFLAGS="$CFLAGS -Werror ${fpch_prefix}-fno-pch-codegen"
    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[ return 0; ]])],
        [ PCH_NO_CODEGEN="${fpch_prefix}-fno-pch-codegen" ],[])
    CFLAGS=$save_CFLAGS
    if test -n "$PCH_CODEGEN"; then
        AC_MSG_RESULT(yes)
    else
        AC_MSG_RESULT(no)
    fi
fi
AC_SUBST(PCH_CODEGEN)
AC_SUBST(PCH_NO_CODEGEN)
PCH_DEBUGINFO=
if test -n "$BUILDING_PCH_WITH_OBJ"; then
    AC_MSG_CHECKING([whether $CC supports ${fpch_prefix}-fpch-debuginfo])
    save_CFLAGS=$CFLAGS
    CFLAGS="$CFLAGS -Werror ${fpch_prefix}-fpch-debuginfo"
    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[ return 0; ]])],[ PCH_DEBUGINFO="${fpch_prefix}-fpch-debuginfo" ],[])
    CFLAGS=$save_CFLAGS
    if test -n "$PCH_DEBUGINFO"; then
        AC_MSG_RESULT(yes)
    else
        AC_MSG_RESULT(no)
    fi
fi
AC_SUBST(PCH_DEBUGINFO)

TAB=`printf '\t'`

AC_MSG_CHECKING([the GNU Make version])
_make_version=`$GNUMAKE --version | grep GNU | $GREP -v GPL | $SED -e 's@^[[^0-9]]*@@' -e 's@ .*@@' -e 's@,.*@@'`
_make_longver=`echo $_make_version | $AWK -F. '{ print \$1*10000+\$2*100+\$3 }'`
if test "$_make_longver" -ge "038200"; then
    AC_MSG_RESULT([$GNUMAKE $_make_version])

elif test "$_make_longver" -ge "038100"; then
    if test "$build_os" = "cygwin"; then
        AC_MSG_ERROR([failed ($GNUMAKE version >= 3.82 needed])
    fi
    AC_MSG_RESULT([$GNUMAKE $_make_version])

    dnl ===================================================================
    dnl Search all the common names for sha1sum
    dnl ===================================================================
    AC_CHECK_PROGS(SHA1SUM, sha1sum sha1 shasum openssl)
    if test -z "$SHA1SUM"; then
        AC_MSG_ERROR([install the appropriate SHA-1 checksumming program for this OS])
    elif test "$SHA1SUM" = "openssl"; then
        SHA1SUM="openssl sha1"
    fi
    AC_MSG_CHECKING([for GNU Make bug 20033])
    TESTGMAKEBUG20033=`mktemp -d tmp.XXXXXX`
    $SED -e "s/<TAB>/$TAB/g" > $TESTGMAKEBUG20033/Makefile << EOF
A := \$(wildcard *.a)

.PHONY: all
all: \$(A:.a=.b)
<TAB>@echo survived bug20033.

.PHONY: setup
setup:
<TAB>@touch 1.a 2.a 3.a 4.a 5.a 6.a

define d1
@echo lala \$(1)
@sleep 1
endef

define d2
@echo tyty \$(1)
@sleep 1
endef

%.b : %.a
<TAB>\$(eval CHECKSUM := \$(word 1,\$(shell cat \$^ | $SHA1SUM))) \$(if \$(wildcard \$(CACHEDIR)/\$(CHECKSUM)),\
<TAB>\$(call d1,\$(CHECKSUM)),\
<TAB>\$(call d2,\$(CHECKSUM)))
EOF
    if test -z "`(cd $TESTGMAKEBUG20033 && $GNUMAKE setup && $GNUMAKE -j)|grep survived`"; then
        no_parallelism_make="YES"
        AC_MSG_RESULT([yes, disable parallelism])
    else
        AC_MSG_RESULT([no, keep parallelism enabled])
    fi
    rm -rf $TESTGMAKEBUG20033
else
    AC_MSG_ERROR([failed ($GNUMAKE version >= 3.81 needed])
fi

# find if gnumake support file function
AC_MSG_CHECKING([whether GNU Make supports the 'file' function])
TESTGMAKEFILEFUNC="`mktemp -d -t tst.XXXXXX`"
if test "$GNUMAKE_WIN_NATIVE" = "TRUE" ; then
    TESTGMAKEFILEFUNC=`cygpath -m $TESTGMAKEFILEFUNC`
fi
$SED -e "s/<TAB>/$TAB/" > $TESTGMAKEFILEFUNC/Makefile << EOF
\$(file >test.txt,Success )

.PHONY: all
all:
<TAB>@cat test.txt

EOF
$GNUMAKE -C $TESTGMAKEFILEFUNC 2>/dev/null 1>&2
if test -f $TESTGMAKEFILEFUNC/test.txt; then
    HAVE_GNUMAKE_FILE_FUNC=TRUE
    AC_MSG_RESULT([yes])
else
    AC_MSG_RESULT([no])
fi
rm -rf $TESTGMAKEFILEFUNC
AC_SUBST(HAVE_GNUMAKE_FILE_FUNC)

_make_ver_check=`$GNUMAKE --version | grep "Built for Windows"`
STALE_MAKE=
if test "$_make_ver_check" = ""; then
   STALE_MAKE=TRUE
fi

HAVE_LD_HASH_STYLE=FALSE
WITH_LINKER_HASH_STYLE=
AC_MSG_CHECKING([for --hash-style gcc linker support])
if test "$GCC" = "yes"; then
    if test -z "$with_linker_hash_style" -o "$with_linker_hash_style" = "yes"; then
        hash_styles="gnu sysv"
    elif test "$with_linker_hash_style" = "no"; then
        hash_styles=
    else
        hash_styles="$with_linker_hash_style"
    fi

    for hash_style in $hash_styles; do
        test "$HAVE_LD_HASH_STYLE" = "TRUE" && continue
        hash_style_ldflags_save=$LDFLAGS
        LDFLAGS="$LDFLAGS -Wl,--hash-style=$hash_style"

        AC_RUN_IFELSE([AC_LANG_PROGRAM(
            [
#include <stdio.h>
            ],[
printf ("");
            ])],
            [
                  HAVE_LD_HASH_STYLE=TRUE
                  WITH_LINKER_HASH_STYLE=$hash_style
            ],
            [HAVE_LD_HASH_STYLE=FALSE],
            [HAVE_LD_HASH_STYLE=FALSE])
        LDFLAGS=$hash_style_ldflags_save
    done

    if test "$HAVE_LD_HASH_STYLE" = "TRUE"; then
        AC_MSG_RESULT( $WITH_LINKER_HASH_STYLE )
    else
        AC_MSG_RESULT( no )
    fi
    LDFLAGS=$hash_style_ldflags_save
else
    AC_MSG_RESULT( no )
fi
AC_SUBST(HAVE_LD_HASH_STYLE)
AC_SUBST(WITH_LINKER_HASH_STYLE)

dnl ===================================================================
dnl Check whether there's a Perl version available.
dnl ===================================================================
if test -z "$with_perl_home"; then
    AC_PATH_PROG(PERL, perl)
else
    test "$build_os" = "cygwin" && with_perl_home=`cygpath -u "$with_perl_home"`
    _perl_path="$with_perl_home/bin/perl"
    if test -x "$_perl_path"; then
        PERL=$_perl_path
    else
        AC_MSG_ERROR([$_perl_path not found])
    fi
fi

dnl ===================================================================
dnl Testing for Perl version 5 or greater.
dnl $] is the Perl version variable, it is returned as an integer
dnl ===================================================================
if test "$PERL"; then
    AC_MSG_CHECKING([the Perl version])
    ${PERL} -e "exit($]);"
    _perl_version=$?
    if test "$_perl_version" -lt 5; then
        AC_MSG_ERROR([found Perl $_perl_version, use Perl 5])
    fi
    AC_MSG_RESULT([Perl $_perl_version])
else
    AC_MSG_ERROR([Perl not found, install Perl 5])
fi

dnl ===================================================================
dnl Testing for required Perl modules
dnl ===================================================================

AC_MSG_CHECKING([for required Perl modules])
perl_use_string="use Cwd ; use Digest::MD5"
if test "$_os" = "WINNT"; then
    if test -n "$PKGFORMAT"; then
        for i in $PKGFORMAT; do
            case "$i" in
            msi)
                # for getting fonts versions to use in MSI
                perl_use_string="$perl_use_string ; use Font::TTF::Font"
                ;;
            esac
        done
    fi
fi
if test "$with_system_hsqldb" = "yes"; then
    perl_use_string="$perl_use_string ; use Archive::Zip"
fi
if test "$enable_openssl" = "yes" -a "$with_system_openssl" != "yes"; then
    # OpenSSL needs that to build
    perl_use_string="$perl_use_string ; use FindBin"
fi
if $PERL -e "$perl_use_string">/dev/null 2>&1; then
    AC_MSG_RESULT([all modules found])
else
    AC_MSG_RESULT([failed to find some modules])
    # Find out which modules are missing.
    for i in $perl_use_string; do
        if test "$i" != "use" -a "$i" != ";"; then
            if ! $PERL -e "use $i;">/dev/null 2>&1; then
                missing_perl_modules="$missing_perl_modules $i"
            fi
        fi
    done
    AC_MSG_ERROR([
    The missing Perl modules are: $missing_perl_modules
    Install them as superuser/administrator with "cpan -i $missing_perl_modules"])
fi

dnl ===================================================================
dnl Check for pkg-config
dnl ===================================================================
if test "$_os" != "WINNT"; then
    PKG_PROG_PKG_CONFIG
fi

if test "$_os" != "WINNT"; then

    # If you use CC=/path/to/compiler/foo-gcc or even CC="ccache
    # /path/to/compiler/foo-gcc" you need to set the AR etc env vars
    # explicitly. Or put /path/to/compiler in PATH yourself.

    # Use wrappers for LTO
    if test "$ENABLE_LTO" = "TRUE" -a "$COM_IS_CLANG" != "TRUE"; then
        AC_CHECK_TOOL(AR,gcc-ar)
        AC_CHECK_TOOL(NM,gcc-nm)
        AC_CHECK_TOOL(RANLIB,gcc-ranlib)
    else
        AC_CHECK_TOOL(AR,ar)
        AC_CHECK_TOOL(NM,nm)
        AC_CHECK_TOOL(RANLIB,ranlib)
    fi
    AC_CHECK_TOOL(OBJDUMP,objdump)
    AC_CHECK_TOOL(READELF,readelf)
    AC_CHECK_TOOL(STRIP,strip)
fi
AC_SUBST(AR)
AC_SUBST(LD)
AC_SUBST(NM)
AC_SUBST(OBJDUMP)
AC_SUBST(PKG_CONFIG)
AC_SUBST(PKG_CONFIG_PATH)
AC_SUBST(PKG_CONFIG_LIBDIR)
AC_SUBST(RANLIB)
AC_SUBST(READELF)
AC_SUBST(STRIP)

dnl ===================================================================
dnl pkg-config checks on macOS
dnl ===================================================================

if test $_os = Darwin; then
    AC_MSG_CHECKING([for bogus pkg-config])
    if test -n "$PKG_CONFIG"; then
        if test "$PKG_CONFIG" = /usr/bin/pkg-config && ls -l /usr/bin/pkg-config | $GREP -q Mono.framework; then
            AC_MSG_ERROR([yes, from Mono. This *will* break the build. Please remove or hide $PKG_CONFIG])
        else
            if test "$enable_bogus_pkg_config" = "yes"; then
                AC_MSG_RESULT([yes, user-approved from unknown origin.])
            else
                AC_MSG_ERROR([yes, from unknown origin. This *will* break the build. Please modify your PATH variable so that $PKG_CONFIG is no longer found by configure scripts.])
            fi
        fi
    else
        AC_MSG_RESULT([no, good])
    fi
fi

find_csc()
{
    # Return value: $csctest

    unset csctest

    reg_get_value_32 "HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/NET Framework Setup/NDP/v4/Client/InstallPath"
    if test -n "$regvalue"; then
        csctest=$regvalue
        return
    fi
}

find_al()
{
    # Return value: $altest

    unset altest

    # We need this check to detect 4.6.1 or above.
    for ver in 4.8 4.7.2 4.7.1 4.7 4.6.2 4.6.1; do
        reg_get_value_32 "HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Microsoft SDKs/NETFXSDK/$ver/WinSDK-NetFx40Tools/InstallationFolder"
        if test -n "$regvalue" -a \( -f "$regvalue/al.exe" -o -f "$regvalue/bin/al.exe" \); then
            altest=$regvalue
            return
        fi
    done

    for x in `ls /proc/registry32/HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Microsoft\ SDKs/Windows`; do
        reg_get_value_32 "HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Microsoft SDKs/Windows/$x/WinSDK-NetFx40Tools/InstallationFolder"
        if test -n "$regvalue" -a \( -f "$regvalue/al.exe" -o -f "$regvalue/bin/al.exe" \); then
            altest=$regvalue
            return
        fi
    done
}

find_dotnetsdk46()
{
    unset frametest

    for ver in 4.8 4.7.2 4.7.1 4.7 4.6.2 4.6.1 4.6; do
        reg_get_value_32 "HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Microsoft SDKs/NETFXSDK/$ver/KitsInstallationFolder"
        if test -n "$regvalue"; then
            frametest=$regvalue
            return
        fi
    done
}

find_winsdk_version()
{
    # Args: $1 : SDK version as in "8.0", "8.1A" etc
    # Return values: $winsdktest, $winsdkbinsubdir, $winsdklibsubdir

    unset winsdktest winsdkbinsubdir winsdklibsubdir

    case "$1" in
    8.0|8.0A)
        reg_get_value_32 "HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Windows Kits/Installed Roots/KitsRoot"
        if test -n "$regvalue"; then
            winsdktest=$regvalue
            winsdklibsubdir=win8
            return
        fi
        ;;
    8.1|8.1A)
        reg_get_value_32 "HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Windows Kits/Installed Roots/KitsRoot81"
        if test -n "$regvalue"; then
            winsdktest=$regvalue
            winsdklibsubdir=winv6.3
            return
        fi
        ;;
    10.0)
        reg_get_value_32 "HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Microsoft SDKs/Windows/v${1}/InstallationFolder"
        if test -n "$regvalue"; then
            winsdktest=$regvalue
            reg_get_value_32 "HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Microsoft SDKs/Windows/v${1}/ProductVersion"
            if test -n "$regvalue"; then
                winsdkbinsubdir="$regvalue".0
                winsdklibsubdir=$winsdkbinsubdir
                local tmppath="$winsdktest\\Include\\$winsdklibsubdir"
                local tmppath_unix=$(cygpath -u "$tmppath")
                # test exist the SDK path
                if test -d "$tmppath_unix"; then
                   # when path is convertible to a short path then path is okay
                   cygpath -d "$tmppath" >/dev/null 2>&1
                   if test $? -ne 0; then
                      AC_MSG_ERROR([Windows SDK doesn't have a 8.3 name, see NtfsDisable8dot3NameCreation])
                   fi
                else
                   AC_MSG_ERROR([The Windows SDK not found, check the installation])
                fi
            fi
            return
        fi
        ;;
    esac
}

find_winsdk()
{
    # Return value: From find_winsdk_version

    unset winsdktest

    for ver in $WINDOWS_SDK_ACCEPTABLE_VERSIONS; do
        find_winsdk_version $ver
        if test -n "$winsdktest"; then
            return
        fi
    done
}

find_msms()
{
    # Return value: $msmdir

    AC_MSG_CHECKING([for MSVC merge modules directory])
    local my_msm_files
    local my_msm_dir

    dnl Order my_msm_files in increasing order. Then check the directories returned
    dnl by ls in an inner loop; assuming they are also ordered in increasing order,
    dnl the result will be the highest MSM version found in the highest directory.

    case "$VCVER" in
        16.0 | 17.0)
        my_msm_files="Microsoft_VC141_CRT_x86.msm Microsoft_VC142_CRT_x86.msm ${my_msm_files}"
        ;;
    esac
    for f in $my_msm_files; do
        echo "$as_me:$LINENO: searching for $f" >&5
    done

    msmdir=
    case "$VCVER" in
    16.0 | 17.0)
        for f in ${my_msm_files}; do
            for l in `ls -1 $VC_PRODUCT_DIR/redist/MSVC/`; do
                my_msm_dir="$VC_PRODUCT_DIR/redist/MSVC/$l/MergeModules/"
                echo "$as_me:$LINENO: looking for $my_msm_dir${f}])" >&5
                if test -e "$my_msm_dir${f}"; then
                    msmdir=$my_msm_dir
                fi
            done
        done
        ;;
    esac

    if test -n "$msmdir"; then
        msmdir=`cygpath -m "$msmdir"`
        AC_MSG_RESULT([$msmdir])
    else
        if test "$ENABLE_RELEASE_BUILD" = "TRUE" ; then
            AC_MSG_FAILURE([not found])
        else
            AC_MSG_WARN([not found (check config.log)])
            add_warning "MSM none of ${my_msm_files} found"
        fi
    fi
}

find_msvc_x64_dlls()
{
    # Return value: $msvcdllpath, $msvcdlls

    AC_MSG_CHECKING([for MSVC x64 DLL path])

    dnl Order crtver in increasing order. Then check the directories returned by
    dnl ls in an inner loop; assuming they are also ordered in increasing order,
    dnl the result will be the highest CRT version found in the highest directory.

    msvcdllpath="$VC_PRODUCT_DIR/redist/x64/Microsoft.VC${VCVER}.CRT"
    case "$VCVER" in
    16.0 | 17.0)
        for crtver in 141 142 143; do
            for l in `ls -1 $VC_PRODUCT_DIR/redist/MSVC/`; do
                echo "$as_me:$LINENO: testing $VC_PRODUCT_DIR/redist/MSVC/$l/x64/Microsoft.VC$crtver.CRT" >&5
                if test -d "$VC_PRODUCT_DIR/redist/MSVC/$l/x64/Microsoft.VC$crtver.CRT"; then
                    msvcdllpath="$VC_PRODUCT_DIR/redist/MSVC/$l/x64/Microsoft.VC$crtver.CRT"
                fi
            done
        done
        ;;
    esac
    AC_MSG_RESULT([$msvcdllpath])
    AC_MSG_CHECKING([for MSVC x64 DLLs])
    msvcdlls="msvcp140.dll vcruntime140.dll"
    for dll in $msvcdlls; do
        if ! test -f "$msvcdllpath/$dll"; then
            AC_MSG_FAILURE([missing $dll])
        fi
    done
    AC_MSG_RESULT([found all ($msvcdlls)])
}

dnl =========================================
dnl Check for the Windows  SDK.
dnl =========================================
if test "$_os" = "WINNT"; then
    AC_MSG_CHECKING([for Windows SDK])
    if test "$build_os" = "cygwin" -o "$build_os" = "wsl"; then
        find_winsdk
        WINDOWS_SDK_HOME=$winsdktest

        # normalize if found
        if test -n "$WINDOWS_SDK_HOME"; then
            WINDOWS_SDK_HOME=`cygpath -d "$WINDOWS_SDK_HOME"`
            WINDOWS_SDK_HOME=`cygpath -u "$WINDOWS_SDK_HOME"`
        fi

        WINDOWS_SDK_LIB_SUBDIR=$winsdklibsubdir
    fi

    if test -n "$WINDOWS_SDK_HOME"; then
        # Remove a possible trailing backslash
        WINDOWS_SDK_HOME=`echo $WINDOWS_SDK_HOME | $SED 's/\/$//'`

        if test -f "$WINDOWS_SDK_HOME/Include/adoint.h" \
             -a -f "$WINDOWS_SDK_HOME/Include/SqlUcode.h" \
             -a -f "$WINDOWS_SDK_HOME/Include/usp10.h"; then
            have_windows_sdk_headers=yes
        elif test -f "$WINDOWS_SDK_HOME/Include/um/adoint.h" \
             -a -f "$WINDOWS_SDK_HOME/Include/um/SqlUcode.h" \
             -a -f "$WINDOWS_SDK_HOME/Include/um/usp10.h"; then
            have_windows_sdk_headers=yes
        elif test -f "$WINDOWS_SDK_HOME/Include/$winsdklibsubdir/um/adoint.h" \
             -a -f "$WINDOWS_SDK_HOME/Include/$winsdklibsubdir/um/SqlUcode.h" \
             -a -f "$WINDOWS_SDK_HOME/Include/$winsdklibsubdir/um/usp10.h"; then
            have_windows_sdk_headers=yes
        else
            have_windows_sdk_headers=no
        fi

        if test -f "$WINDOWS_SDK_HOME/lib/user32.lib"; then
            have_windows_sdk_libs=yes
        elif test -f "$WINDOWS_SDK_HOME/lib/$winsdklibsubdir/um/$WIN_BUILD_ARCH/user32.lib"; then
            have_windows_sdk_libs=yes
        else
            have_windows_sdk_libs=no
        fi

        if test $have_windows_sdk_headers = no -o $have_windows_sdk_libs = no; then
            AC_MSG_ERROR([Some (all?) Windows SDK files not found, please check if all needed parts of
the  Windows SDK are installed.])
        fi
    fi

    if test -z "$WINDOWS_SDK_HOME"; then
        AC_MSG_RESULT([no, hoping the necessary headers and libraries will be found anyway!?])
    elif echo $WINDOWS_SDK_HOME | grep "8.0" >/dev/null 2>/dev/null; then
        WINDOWS_SDK_VERSION=80
        AC_MSG_RESULT([found Windows SDK 8.0 ($WINDOWS_SDK_HOME)])
    elif echo $WINDOWS_SDK_HOME | grep "8.1" >/dev/null 2>/dev/null; then
        WINDOWS_SDK_VERSION=81
        AC_MSG_RESULT([found Windows SDK 8.1 ($WINDOWS_SDK_HOME)])
    elif echo $WINDOWS_SDK_HOME | grep "/10" >/dev/null 2>/dev/null; then
        WINDOWS_SDK_VERSION=10
        AC_MSG_RESULT([found Windows SDK 10.0 ($WINDOWS_SDK_HOME)])
    else
        AC_MSG_ERROR([Found legacy Windows Platform SDK ($WINDOWS_SDK_HOME)])
    fi
    PathFormat "$WINDOWS_SDK_HOME"
    WINDOWS_SDK_HOME="$formatted_path"
    WINDOWS_SDK_HOME_unix="$formatted_path_unix"
    if test "$build_os" = "cygwin" -o "$build_os" = "wsl"; then
        SOLARINC="$SOLARINC -I$WINDOWS_SDK_HOME/include -I$COMPATH/Include"
        if test -d "$WINDOWS_SDK_HOME/include/um"; then
            SOLARINC="$SOLARINC -I$WINDOWS_SDK_HOME/include/um -I$WINDOWS_SDK_HOME/include/shared"
        elif test -d "$WINDOWS_SDK_HOME/Include/$winsdklibsubdir/um"; then
            SOLARINC="$SOLARINC -I$WINDOWS_SDK_HOME/Include/$winsdklibsubdir/um -I$WINDOWS_SDK_HOME/Include/$winsdklibsubdir/shared"
        fi
    fi

    dnl TODO: solenv/bin/modules/installer/windows/msiglobal.pm wants to use a
    dnl WiLangId.vbs that is included only in some SDKs (e.g., included in v7.1
    dnl but not in v8.0), so allow this to be overridden with a
    dnl WINDOWS_SDK_WILANGID for now; a full-blown --with-windows-sdk-wilangid
    dnl and configuration error if no WiLangId.vbs is found would arguably be
    dnl better, but I do not know under which conditions exactly it is needed by
    dnl msiglobal.pm:
    if test -z "$WINDOWS_SDK_WILANGID" -a -n "$WINDOWS_SDK_HOME"; then
        WINDOWS_SDK_WILANGID=$WINDOWS_SDK_HOME/Samples/sysmgmt/msi/scripts/WiLangId.vbs
        WINDOWS_SDK_WILANGID_unix=$(cygpath -u "$WINDOWS_SDK_WILANGID")
        if ! test -e "$WINDOWS_SDK_WILANGID_unix" ; then
            WINDOWS_SDK_WILANGID="${WINDOWS_SDK_HOME}/bin/${WINDOWS_SDK_LIB_SUBDIR}/${WIN_BUILD_ARCH}/WiLangId.vbs"
            WINDOWS_SDK_WILANGID_unix=$(cygpath -u "$WINDOWS_SDK_WILANGID")
        fi
        if ! test -e "$WINDOWS_SDK_WILANGID_unix" ; then
            WINDOWS_SDK_WILANGID=$WINDOWS_SDK_HOME/bin/$WIN_BUILD_ARCH/WiLangId.vbs
            WINDOWS_SDK_WILANGID_unix=$(cygpath -u "$WINDOWS_SDK_WILANGID")
        fi
        if ! test -e "$WINDOWS_SDK_WILANGID_unix" ; then
            WINDOWS_SDK_WILANGID=$(cygpath -sm "C:/Program Files (x86)/Windows Kits/8.1/bin/$WIN_BUILD_ARCH/WiLangId.vbs")
            WINDOWS_SDK_WILANGID_unix=$(cygpath -u "$WINDOWS_SDK_WILANGID")
        fi
    fi
    if test -n "$with_lang" -a "$with_lang" != "en-US"; then
        if test -n "$with_package_format" -a "$with_package_format" != no; then
            for i in "$with_package_format"; do
                if test "$i" = "msi"; then
                    if ! test -e "$WINDOWS_SDK_WILANGID_unix" ; then
                        AC_MSG_ERROR([WiLangId.vbs not found - building translated packages will fail])
                    fi
                fi
            done
        fi
    fi
fi
AC_SUBST(WINDOWS_SDK_HOME)
AC_SUBST(WINDOWS_SDK_LIB_SUBDIR)
AC_SUBST(WINDOWS_SDK_VERSION)
AC_SUBST(WINDOWS_SDK_WILANGID)

if test "$build_os" = "cygwin"; then
    dnl Check midl.exe; this being the first check for a tool in the SDK bin
    dnl dir, it also determines that dir's path w/o an arch segment if any,
    dnl WINDOWS_SDK_BINDIR_NO_ARCH:
    AC_MSG_CHECKING([for midl.exe])

    find_winsdk
    if test -n "$winsdkbinsubdir" \
        -a -f "$winsdktest/Bin/$winsdkbinsubdir/$WIN_BUILD_ARCH/midl.exe"
    then
        MIDL_PATH=$winsdktest/Bin/$winsdkbinsubdir/$WIN_BUILD_ARCH
        WINDOWS_SDK_BINDIR_NO_ARCH=$WINDOWS_SDK_HOME/Bin/$winsdkbinsubdir
    elif test -f "$winsdktest/Bin/$WIN_BUILD_ARCH/midl.exe"; then
        MIDL_PATH=$winsdktest/Bin/$WIN_BUILD_ARCH
        WINDOWS_SDK_BINDIR_NO_ARCH=$WINDOWS_SDK_HOME/Bin
    elif test -f "$winsdktest/Bin/midl.exe"; then
        MIDL_PATH=$winsdktest/Bin
        WINDOWS_SDK_BINDIR_NO_ARCH=$WINDOWS_SDK_HOME/Bin
    fi
    if test ! -f "$MIDL_PATH/midl.exe"; then
        AC_MSG_ERROR([midl.exe not found in $winsdktest/Bin/$WIN_BUILD_ARCH, Windows SDK installation broken?])
    else
        AC_MSG_RESULT([$MIDL_PATH/midl.exe])
    fi

    # Convert to posix path with 8.3 filename restrictions ( No spaces )
    MIDL_PATH=`win_short_path_for_make "$MIDL_PATH"`

    if test -f "$WINDOWS_SDK_BINDIR_NO_ARCH/msiinfo.exe" \
         -a -f "$WINDOWS_SDK_BINDIR_NO_ARCH/msidb.exe" \
         -a -f "$WINDOWS_SDK_BINDIR_NO_ARCH/uuidgen.exe" \
         -a -f "$WINDOWS_SDK_BINDIR_NO_ARCH/msitran.exe"; then :
    elif test -f "$WINDOWS_SDK_BINDIR_NO_ARCH/x86/msiinfo.exe" \
         -a -f "$WINDOWS_SDK_BINDIR_NO_ARCH/x86/msidb.exe" \
         -a -f "$WINDOWS_SDK_BINDIR_NO_ARCH/x86/uuidgen.exe" \
         -a -f "$WINDOWS_SDK_BINDIR_NO_ARCH/x86/msitran.exe"; then :
    elif test -f "$WINDOWS_SDK_HOME/bin/x86/msiinfo.exe" \
         -a -f "$WINDOWS_SDK_HOME/bin/x86/msidb.exe" \
         -a -f "$WINDOWS_SDK_BINDIR_NO_ARCH/x86/uuidgen.exe" \
         -a -f "$WINDOWS_SDK_HOME/bin/x86/msitran.exe"; then :
    else
        AC_MSG_ERROR([Some (all?) Windows Installer tools in the Windows SDK are missing, please install.])
    fi

    dnl Check csc.exe
    AC_MSG_CHECKING([for csc.exe])
    find_csc
    if test -f "$csctest/csc.exe"; then
        CSC_PATH="$csctest"
    fi
    if test ! -f "$CSC_PATH/csc.exe"; then
        AC_MSG_ERROR([csc.exe not found as $CSC_PATH/csc.exe])
    else
        AC_MSG_RESULT([$CSC_PATH/csc.exe])
    fi

    CSC_PATH=`win_short_path_for_make "$CSC_PATH"`

    dnl Check al.exe
    AC_MSG_CHECKING([for al.exe])
    find_winsdk
    if test -n "$winsdkbinsubdir" \
        -a -f "$winsdktest/Bin/$winsdkbinsubdir/$WIN_BUILD_ARCH/al.exe"
    then
        AL_PATH="$winsdktest/Bin/$winsdkbinsubdir/$WIN_BUILD_ARCH"
    elif test -f "$winsdktest/Bin/$WIN_BUILD_ARCH/al.exe"; then
        AL_PATH="$winsdktest/Bin/$WIN_BUILD_ARCH"
    elif test -f "$winsdktest/Bin/al.exe"; then
        AL_PATH="$winsdktest/Bin"
    fi

    if test -z "$AL_PATH"; then
        find_al
        if test -f "$altest/bin/al.exe"; then
            AL_PATH="$altest/bin"
        elif test -f "$altest/al.exe"; then
            AL_PATH="$altest"
        fi
    fi
    if test ! -f "$AL_PATH/al.exe"; then
        AC_MSG_ERROR([al.exe not found as $AL_PATH/al.exe])
    else
        AC_MSG_RESULT([$AL_PATH/al.exe])
    fi

    AL_PATH=`win_short_path_for_make "$AL_PATH"`

    dnl Check mscoree.lib / .NET Framework dir
    AC_MSG_CHECKING(.NET Framework)
    find_dotnetsdk46
    PathFormat "$frametest"
    frametest="$formatted_path"
    if test -f "$frametest/Lib/um/$WIN_BUILD_ARCH/mscoree.lib"; then
        DOTNET_FRAMEWORK_HOME="$frametest"
    else
        find_winsdk
        if test -f "$winsdktest/lib/mscoree.lib" -o -f "$winsdktest/lib/$winsdklibsubdir/um/$WIN_BUILD_ARCH/mscoree.lib"; then
            DOTNET_FRAMEWORK_HOME="$winsdktest"
        fi
    fi
    if test ! -f "$DOTNET_FRAMEWORK_HOME/lib/mscoree.lib" -a ! -f "$DOTNET_FRAMEWORK_HOME/lib/$winsdklibsubdir/um/$WIN_BUILD_ARCH/mscoree.lib" -a ! -f "$DOTNET_FRAMEWORK_HOME/Lib/um/$WIN_BUILD_ARCH/mscoree.lib"; then
        AC_MSG_ERROR([mscoree.lib not found])
    fi
    AC_MSG_RESULT([found: $DOTNET_FRAMEWORK_HOME])

    PathFormat "$MIDL_PATH"
    MIDL_PATH="$formatted_path"

    PathFormat "$AL_PATH"
    AL_PATH="$formatted_path"

    PathFormat "$DOTNET_FRAMEWORK_HOME"
    DOTNET_FRAMEWORK_HOME="$formatted_path"

    PathFormat "$CSC_PATH"
    CSC_PATH="$formatted_path"
fi

dnl ===================================================================
dnl Testing for C++ compiler and version...
dnl ===================================================================

if test "$_os" != "WINNT"; then
    # AC_PROG_CXX sets CXXFLAGS to -g -O2 if not set, avoid that
    save_CXXFLAGS=$CXXFLAGS
    AC_PROG_CXX
    CXXFLAGS=$save_CXXFLAGS
    if test -z "$CXX_BASE"; then
        CXX_BASE=`first_arg_basename "$CXX"`
    fi
fi

dnl check for GNU C++ compiler version
if test "$GXX" = "yes" -a -z "$COM_IS_CLANG"; then
    AC_MSG_CHECKING([the GNU C++ compiler version])

    _gpp_version=`$CXX -dumpversion`
    _gpp_majmin=`echo $_gpp_version | $AWK -F. '{ print \$1*100+\$2 }'`

    if test "$_gpp_majmin" -lt "700"; then
        AC_MSG_ERROR([You need to use GNU C++ compiler version >= 7.0 to build LibreOffice, you have $_gpp_version.])
    else
        AC_MSG_RESULT([ok (g++ $_gpp_version)])
    fi

    dnl see https://code.google.com/p/android/issues/detail?id=41770
        glibcxx_threads=no
        AC_LANG_PUSH([C++])
        AC_REQUIRE_CPP
        AC_MSG_CHECKING([whether $CXX_BASE is broken with boost.thread])
        AC_PREPROC_IFELSE([AC_LANG_PROGRAM([[
            #include <bits/c++config.h>]],[[
            #if !defined(_GLIBCXX_HAVE_GTHR_DEFAULT) \
            && !defined(_GLIBCXX__PTHREADS) \
            && !defined(_GLIBCXX_HAS_GTHREADS)
            choke me
            #endif
        ]])],[AC_MSG_RESULT([yes])
        glibcxx_threads=yes],[AC_MSG_RESULT([no])])
        AC_LANG_POP([C++])
        if test $glibcxx_threads = yes; then
            BOOST_CXXFLAGS="-D_GLIBCXX_HAS_GTHREADS"
        fi
fi
AC_SUBST(BOOST_CXXFLAGS)

#
# prefx CXX with ccache if needed
#
if test "$CCACHE" != ""; then
    AC_MSG_CHECKING([whether $CXX_BASE is already ccached])
    AC_LANG_PUSH([C++])
    save_CXXFLAGS=$CXXFLAGS
    CXXFLAGS="$CXXFLAGS --ccache-skip -O2"
    # msvc does not fail on unknown options, check stdout
    if test "$COM" = MSC; then
        CXXFLAGS="$CXXFLAGS -nologo"
    fi
    save_ac_cxx_werror_flag=$ac_cxx_werror_flag
    ac_cxx_werror_flag=yes
    dnl an empty program will do, we're checking the compiler flags
    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([],[])],
                      [use_ccache=yes], [use_ccache=no])
    if test $use_ccache = yes -a "${CCACHE/*sccache*/}" != ""; then
        AC_MSG_RESULT([yes])
    else
        CXX="$CCACHE $CXX"
        CXX_BASE="ccache $CXX_BASE"
        AC_MSG_RESULT([no])
    fi
    CXXFLAGS=$save_CXXFLAGS
    ac_cxx_werror_flag=$save_ac_cxx_werror_flag
    AC_LANG_POP([C++])
fi

dnl ===================================================================
dnl Find pre-processors.(should do that _after_ messing with CC/CXX)
dnl ===================================================================

if test "$_os" != "WINNT"; then
    AC_PROG_CXXCPP

    dnl Check whether there's a C pre-processor.
    AC_PROG_CPP
fi


dnl ===================================================================
dnl Find integral type sizes and alignments
dnl ===================================================================

if test "$_os" != "WINNT"; then

    AC_CHECK_SIZEOF(long)
    AC_CHECK_SIZEOF(short)
    AC_CHECK_SIZEOF(int)
    AC_CHECK_SIZEOF(long long)
    AC_CHECK_SIZEOF(double)
    AC_CHECK_SIZEOF(void*)
    AC_CHECK_SIZEOF(size_t)

    SAL_TYPES_SIZEOFSHORT=$ac_cv_sizeof_short
    SAL_TYPES_SIZEOFINT=$ac_cv_sizeof_int
    SAL_TYPES_SIZEOFLONG=$ac_cv_sizeof_long
    SAL_TYPES_SIZEOFLONGLONG=$ac_cv_sizeof_long_long
    SAL_TYPES_SIZEOFPOINTER=$ac_cv_sizeof_voidp
    SIZEOF_SIZE_T=$ac_cv_sizeof_size_t

    dnl Allow build without AC_CHECK_ALIGNOF, grrr
    m4_pattern_allow([AC_CHECK_ALIGNOF])
    m4_ifdef([AC_CHECK_ALIGNOF],
        [
            AC_CHECK_ALIGNOF(short,[#include <stddef.h>])
            AC_CHECK_ALIGNOF(int,[#include <stddef.h>])
            AC_CHECK_ALIGNOF(long,[#include <stddef.h>])
            AC_CHECK_ALIGNOF(double,[#include <stddef.h>])
        ],
        [
            case "$_os-$host_cpu" in
            Linux-i686)
                test -z "$ac_cv_alignof_short" && ac_cv_alignof_short=2
                test -z "$ac_cv_alignof_int" && ac_cv_alignof_int=4
                test -z "$ac_cv_alignof_long" && ac_cv_alignof_long=4
                test -z "$ac_cv_alignof_double" && ac_cv_alignof_double=4
                ;;
            Linux-x86_64)
                test -z "$ac_cv_alignof_short" && ac_cv_alignof_short=2
                test -z "$ac_cv_alignof_int" && ac_cv_alignof_int=4
                test -z "$ac_cv_alignof_long" && ac_cv_alignof_long=8
                test -z "$ac_cv_alignof_double" && ac_cv_alignof_double=8
                ;;
            *)
                if test -z "$ac_cv_alignof_short" -o \
                        -z "$ac_cv_alignof_int" -o \
                        -z "$ac_cv_alignof_long" -o \
                        -z "$ac_cv_alignof_double"; then
                   AC_MSG_ERROR([Your Autoconf doesn't have [AC_][CHECK_ALIGNOF]. You need to set the environment variables ac_cv_alignof_short, ac_cv_alignof_int, ac_cv_alignof_long and ac_cv_alignof_double.])
                fi
                ;;
            esac
        ])

    SAL_TYPES_ALIGNMENT2=$ac_cv_alignof_short
    SAL_TYPES_ALIGNMENT4=$ac_cv_alignof_int
    if test $ac_cv_sizeof_long -eq 8; then
        SAL_TYPES_ALIGNMENT8=$ac_cv_alignof_long
    elif test $ac_cv_sizeof_double -eq 8; then
        SAL_TYPES_ALIGNMENT8=$ac_cv_alignof_double
    else
        AC_MSG_ERROR([Cannot find alignment of 8 byte types.])
    fi

    dnl Check for large file support
    AC_SYS_LARGEFILE
    if test -n "$ac_cv_sys_file_offset_bits" -a "$ac_cv_sys_file_offset_bits" != "no"; then
        LFS_CFLAGS="-D_FILE_OFFSET_BITS=$ac_cv_sys_file_offset_bits"
    fi
    if test -n "$ac_cv_sys_large_files" -a "$ac_cv_sys_large_files" != "no"; then
        LFS_CFLAGS="$LFS_CFLAGS -D_LARGE_FILES"
    fi
else
    # Hardcode for MSVC
    SAL_TYPES_SIZEOFSHORT=2
    SAL_TYPES_SIZEOFINT=4
    SAL_TYPES_SIZEOFLONG=4
    SAL_TYPES_SIZEOFLONGLONG=8
    if test $WIN_HOST_BITS -eq 32; then
        SAL_TYPES_SIZEOFPOINTER=4
        SIZEOF_SIZE_T=4
    else
        SAL_TYPES_SIZEOFPOINTER=8
        SIZEOF_SIZE_T=8
    fi
    SAL_TYPES_ALIGNMENT2=2
    SAL_TYPES_ALIGNMENT4=4
    SAL_TYPES_ALIGNMENT8=8
    LFS_CFLAGS=''
fi
AC_SUBST(LFS_CFLAGS)
AC_SUBST(SIZEOF_SIZE_T)

AC_DEFINE_UNQUOTED(SAL_TYPES_SIZEOFSHORT,$SAL_TYPES_SIZEOFSHORT)
AC_DEFINE_UNQUOTED(SAL_TYPES_SIZEOFINT,$SAL_TYPES_SIZEOFINT)
AC_DEFINE_UNQUOTED(SAL_TYPES_SIZEOFLONG,$SAL_TYPES_SIZEOFLONG)
AC_DEFINE_UNQUOTED(SAL_TYPES_SIZEOFLONGLONG,$SAL_TYPES_SIZEOFLONGLONG)
AC_DEFINE_UNQUOTED(SAL_TYPES_SIZEOFPOINTER,$SAL_TYPES_SIZEOFPOINTER)
AC_DEFINE_UNQUOTED(SAL_TYPES_ALIGNMENT2,$SAL_TYPES_ALIGNMENT2)
AC_DEFINE_UNQUOTED(SAL_TYPES_ALIGNMENT4,$SAL_TYPES_ALIGNMENT4)
AC_DEFINE_UNQUOTED(SAL_TYPES_ALIGNMENT8,$SAL_TYPES_ALIGNMENT8)

dnl ===================================================================
dnl Check whether to enable runtime optimizations
dnl ===================================================================
ENABLE_RUNTIME_OPTIMIZATIONS=
AC_MSG_CHECKING([whether to enable runtime optimizations])
if test -z "$enable_runtime_optimizations"; then
    for i in $CC; do
        case $i in
        -fsanitize=*)
            enable_runtime_optimizations=no
            break
            ;;
        esac
    done
fi
if test "$enable_runtime_optimizations" != no; then
    ENABLE_RUNTIME_OPTIMIZATIONS=TRUE
    AC_DEFINE(ENABLE_RUNTIME_OPTIMIZATIONS)
    AC_MSG_RESULT([yes])
else
    AC_MSG_RESULT([no])
fi
AC_SUBST([ENABLE_RUNTIME_OPTIMIZATIONS])

dnl ===================================================================
dnl Check if valgrind headers are available
dnl ===================================================================
ENABLE_VALGRIND=
if test "$cross_compiling" != yes -a "$with_valgrind" != no; then
    prev_cppflags=$CPPFLAGS
    # Is VALGRIND_CFLAGS something one is supposed to have in the environment,
    # or where does it come from?
    CPPFLAGS="$CPPFLAGS $VALGRIND_CFLAGS"
    AC_CHECK_HEADER([valgrind/valgrind.h],
        [ENABLE_VALGRIND=TRUE])
    CPPFLAGS=$prev_cppflags
fi
AC_SUBST([ENABLE_VALGRIND])
if test -z "$ENABLE_VALGRIND"; then
    if test "$with_valgrind" = yes; then
        AC_MSG_ERROR([--with-valgrind specified but no Valgrind headers found])
    fi
    VALGRIND_CFLAGS=
fi
AC_SUBST([VALGRIND_CFLAGS])


dnl ===================================================================
dnl Check if SDT probes (for systemtap, gdb, dtrace) are available
dnl ===================================================================

# We need at least the sys/sdt.h include header.
AC_CHECK_HEADER([sys/sdt.h], [SDT_H_FOUND='TRUE'], [SDT_H_FOUND='FALSE'])
if test "$SDT_H_FOUND" = "TRUE"; then
    # Found sys/sdt.h header, now make sure the c++ compiler works.
    # Old g++ versions had problems with probes in constructors/destructors.
    AC_MSG_CHECKING([working sys/sdt.h and c++ support])
    AC_LANG_PUSH([C++])
    AC_LINK_IFELSE([AC_LANG_PROGRAM([[
    #include <sys/sdt.h>
    class ProbeClass
    {
    private:
      int& ref;
      const char *name;

    public:
      ProbeClass(int& v, const char *n) : ref(v), name(n)
      {
        DTRACE_PROBE2(_test_, cons, name, ref);
      }

      void method(int min)
      {
        DTRACE_PROBE3(_test_, meth, name, ref, min);
        ref -= min;
      }

      ~ProbeClass()
      {
        DTRACE_PROBE2(_test_, dest, name, ref);
      }
    };
    ]],[[
    int i = 64;
    DTRACE_PROBE1(_test_, call, i);
    ProbeClass inst = ProbeClass(i, "call");
    inst.method(24);
    ]])], [AC_MSG_RESULT([yes]); AC_DEFINE([USE_SDT_PROBES])],
          [AC_MSG_RESULT([no, sdt.h or c++ compiler too old])])
    AC_LANG_POP([C++])
fi
AC_CONFIG_HEADERS([config_host/config_probes.h])

dnl ===================================================================
dnl GCC features
dnl ===================================================================
HAVE_GCC_STACK_CLASH_PROTECTION=
if test "$GCC" = "yes" -o "$COM_IS_CLANG" = TRUE; then
    AC_MSG_CHECKING([whether $CC_BASE supports -fstack-clash-protection])
    save_CFLAGS=$CFLAGS
    CFLAGS="$CFLAGS -Werror -fstack-clash-protection"
    AC_LINK_IFELSE(
        [AC_LANG_PROGRAM(, [[return 0;]])],
        [AC_MSG_RESULT([yes]); HAVE_GCC_STACK_CLASH_PROTECTION=TRUE],
        [AC_MSG_RESULT([no])])
    CFLAGS=$save_CFLAGS

    AC_MSG_CHECKING([whether $CC_BASE supports -mno-avx])
    save_CFLAGS=$CFLAGS
    CFLAGS="$CFLAGS -Werror -mno-avx"
    AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[ return 0; ]])],[ HAVE_GCC_AVX=TRUE ],[])
    CFLAGS=$save_CFLAGS
    if test "$HAVE_GCC_AVX" = "TRUE"; then
        AC_MSG_RESULT([yes])
    else
        AC_MSG_RESULT([no])
    fi

    AC_MSG_CHECKING([whether $CC_BASE supports atomic functions])
    AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[
    int v = 0;
    if (__sync_add_and_fetch(&v, 1) != 1 ||
        __sync_sub_and_fetch(&v, 1) != 0)
        return 1;
    __sync_synchronize();
    if (__sync_val_compare_and_swap(&v, 0, 1) != 0 ||
        v != 1)
        return 1;
    return 0;
]])],[HAVE_GCC_BUILTIN_ATOMIC=TRUE],[])
    if test "$HAVE_GCC_BUILTIN_ATOMIC" = "TRUE"; then
        AC_MSG_RESULT([yes])
        AC_DEFINE(HAVE_GCC_BUILTIN_ATOMIC)
    else
        AC_MSG_RESULT([no])
    fi

    AC_MSG_CHECKING([whether $CXX_BASE defines __base_class_type_info in cxxabi.h])
    AC_LANG_PUSH([C++])
    AC_COMPILE_IFELSE([AC_LANG_SOURCE([
            #include <cstddef>
            #include <cxxabi.h>
            std::size_t f() { return sizeof(__cxxabiv1::__base_class_type_info); }
        ])], [
            AC_DEFINE([HAVE_CXXABI_H_BASE_CLASS_TYPE_INFO],[1])
            AC_MSG_RESULT([yes])
        ], [AC_MSG_RESULT([no])])
    AC_LANG_POP([C++])

    AC_MSG_CHECKING([whether $CXX_BASE defines __class_type_info in cxxabi.h])
    AC_LANG_PUSH([C++])
    AC_COMPILE_IFELSE([AC_LANG_SOURCE([
            #include <cstddef>
            #include <cxxabi.h>
            std::size_t f() { return sizeof(__cxxabiv1::__class_type_info); }
        ])], [
            AC_DEFINE([HAVE_CXXABI_H_CLASS_TYPE_INFO],[1])
            AC_MSG_RESULT([yes])
        ], [AC_MSG_RESULT([no])])
    AC_LANG_POP([C++])

    AC_MSG_CHECKING([whether $CXX_BASE declares __cxa_allocate_exception in cxxabi.h])
    AC_LANG_PUSH([C++])
    AC_COMPILE_IFELSE([AC_LANG_SOURCE([
            #include <cxxabi.h>
            void * f() { return __cxxabiv1::__cxa_allocate_exception(0); }
        ])], [
            AC_DEFINE([HAVE_CXXABI_H_CXA_ALLOCATE_EXCEPTION],[1])
            AC_MSG_RESULT([yes])
        ], [AC_MSG_RESULT([no])])
    AC_LANG_POP([C++])

    AC_MSG_CHECKING([whether $CXX_BASE defines __cxa_eh_globals in cxxabi.h])
    AC_LANG_PUSH([C++])
    AC_COMPILE_IFELSE([AC_LANG_SOURCE([
            #include <cstddef>
            #include <cxxabi.h>
            std::size_t f() { return sizeof(__cxxabiv1::__cxa_eh_globals); }
        ])], [
            AC_DEFINE([HAVE_CXXABI_H_CXA_EH_GLOBALS],[1])
            AC_MSG_RESULT([yes])
        ], [AC_MSG_RESULT([no])])
    AC_LANG_POP([C++])

    AC_MSG_CHECKING([whether $CXX_BASE defines __cxa_exception in cxxabi.h])
    AC_LANG_PUSH([C++])
    AC_COMPILE_IFELSE([AC_LANG_SOURCE([
            #include <cstddef>
            #include <cxxabi.h>
            std::size_t f() { return sizeof(__cxxabiv1::__cxa_exception); }
        ])], [
            AC_DEFINE([HAVE_CXXABI_H_CXA_EXCEPTION],[1])
            AC_MSG_RESULT([yes])
        ], [AC_MSG_RESULT([no])])
    AC_LANG_POP([C++])

    AC_MSG_CHECKING([whether $CXX_BASE declares __cxa_get_globals in cxxabi.h])
    AC_LANG_PUSH([C++])
    AC_COMPILE_IFELSE([AC_LANG_SOURCE([
            #include <cxxabi.h>
            void * f() { return __cxxabiv1::__cxa_get_globals(); }
        ])], [
            AC_DEFINE([HAVE_CXXABI_H_CXA_GET_GLOBALS],[1])
            AC_MSG_RESULT([yes])
        ], [AC_MSG_RESULT([no])])
    AC_LANG_POP([C++])

    AC_MSG_CHECKING([whether $CXX_BASE declares __cxa_current_exception_type in cxxabi.h])
    AC_LANG_PUSH([C++])
    AC_COMPILE_IFELSE([AC_LANG_SOURCE([
            #include <cxxabi.h>
            void * f() { return __cxxabiv1::__cxa_current_exception_type(); }
        ])], [
            AC_DEFINE([HAVE_CXXABI_H_CXA_CURRENT_EXCEPTION_TYPE],[1])
            AC_MSG_RESULT([yes])
        ], [AC_MSG_RESULT([no])])
    AC_LANG_POP([C++])

    AC_MSG_CHECKING([whether $CXX_BASE declares __cxa_throw in cxxabi.h])
    AC_LANG_PUSH([C++])
    AC_COMPILE_IFELSE([AC_LANG_SOURCE([
            #include <cxxabi.h>
            void f() { __cxxabiv1::__cxa_throw(0, 0, 0); }
        ])], [
            AC_DEFINE([HAVE_CXXABI_H_CXA_THROW],[1])
            AC_MSG_RESULT([yes])
        ], [AC_MSG_RESULT([no])])
    AC_LANG_POP([C++])

    AC_MSG_CHECKING([whether $CXX_BASE defines __si_class_type_info in cxxabi.h])
    AC_LANG_PUSH([C++])
    AC_COMPILE_IFELSE([AC_LANG_SOURCE([
            #include <cstddef>
            #include <cxxabi.h>
            std::size_t f() { return sizeof(__cxxabiv1::__si_class_type_info); }
        ])], [
            AC_DEFINE([HAVE_CXXABI_H_SI_CLASS_TYPE_INFO],[1])
            AC_MSG_RESULT([yes])
        ], [AC_MSG_RESULT([no])])
    AC_LANG_POP([C++])

    AC_MSG_CHECKING([whether $CXX_BASE defines __vmi_class_type_info in cxxabi.h])
    AC_LANG_PUSH([C++])
    AC_COMPILE_IFELSE([AC_LANG_SOURCE([
            #include <cstddef>
            #include <cxxabi.h>
            std::size_t f() { return sizeof(__cxxabiv1::__vmi_class_type_info); }
        ])], [
            AC_DEFINE([HAVE_CXXABI_H_VMI_CLASS_TYPE_INFO],[1])
            AC_MSG_RESULT([yes])
        ], [AC_MSG_RESULT([no])])
    AC_LANG_POP([C++])
fi

AC_SUBST(HAVE_GCC_AVX)
AC_SUBST(HAVE_GCC_BUILTIN_ATOMIC)
AC_SUBST(HAVE_GCC_STACK_CLASH_PROTECTION)

dnl ===================================================================
dnl Identify the C++ library
dnl ===================================================================

AC_MSG_CHECKING([what the C++ library is])
HAVE_LIBSTDCPP=
AC_LANG_PUSH([C++])
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
#include <utility>
#ifndef __GLIBCXX__
foo bar
#endif
]])],
    [CPP_LIBRARY=GLIBCXX
     cpp_library_name="GNU libstdc++"
     HAVE_LIBSTDCPP=TRUE
    ],
    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
#include <utility>
#ifndef _LIBCPP_VERSION
foo bar
#endif
]])],
    [CPP_LIBRARY=LIBCPP
     cpp_library_name="LLVM libc++"
     AC_DEFINE([HAVE_LIBCXX])
    ],
    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
#include <utility>
#ifndef _MSC_VER
foo bar
#endif
]])],
    [CPP_LIBRARY=MSVCRT
     cpp_library_name="Microsoft"
    ],
    AC_MSG_ERROR([Could not figure out what C++ library this is]))))
AC_MSG_RESULT([$cpp_library_name])
AC_LANG_POP([C++])
AC_SUBST([HAVE_LIBSTDCPP])

dnl ===================================================================
dnl Check for gperf
dnl ===================================================================
AC_PATH_PROG(GPERF, gperf)
if test -z "$GPERF"; then
    AC_MSG_ERROR([gperf not found but needed. Install it.])
fi
if test "$GNUMAKE_WIN_NATIVE" = "TRUE" ; then
    GPERF=`cygpath -m $GPERF`
fi
AC_MSG_CHECKING([whether gperf is new enough])
my_gperf_ver1=$($GPERF --version | head -n 1)
my_gperf_ver2=${my_gperf_ver1#GNU gperf }
my_gperf_ver3=$(printf %s "$my_gperf_ver2" | $AWK -F. '{ print $1*100+($2<100?$2:99) }')
if test "$my_gperf_ver3" -ge 301; then
    AC_MSG_RESULT([yes ($my_gperf_ver2)])
else
    AC_MSG_ERROR(["$my_gperf_ver1" is too old or unrecognized, must be at least gperf 3.1])
fi
AC_SUBST(GPERF)

dnl ===================================================================
dnl Check for system libcmis
dnl ===================================================================
# libcmis requires curl and we can't build curl for iOS
if test "$test_cmis" = "yes" -a "$enable_cmis" = "yes"; then
    libo_CHECK_SYSTEM_MODULE([libcmis],[LIBCMIS],[libcmis-0.5 >= 0.5.2])
    ENABLE_LIBCMIS=TRUE
else
    ENABLE_LIBCMIS=
fi
AC_SUBST(ENABLE_LIBCMIS)

dnl ===================================================================
dnl C++11
dnl ===================================================================

AC_MSG_CHECKING([whether $CXX_BASE supports C++17])
CXXFLAGS_CXX11=
if test "$COM" = MSC -a "$COM_IS_CLANG" != TRUE; then
    if test "$with_latest_c__" = yes; then
        CXXFLAGS_CXX11=-std:c++latest
    else
        CXXFLAGS_CXX11=-std:c++17
    fi
    CXXFLAGS_CXX11="$CXXFLAGS_CXX11 -permissive- -Zc:__cplusplus"
elif test "$GCC" = "yes" -o "$COM_IS_CLANG" = TRUE; then
    my_flags='-std=c++17 -std=c++1z'
    if test "$with_latest_c__" = yes; then
        my_flags="-std=c++23 -std=c++2b -std=c++20 -std=c++2a $my_flags"
    fi
    for flag in $my_flags; do
        if test "$COM" = MSC; then
            flag="-Xclang $flag"
        fi
        save_CXXFLAGS=$CXXFLAGS
        CXXFLAGS="$CXXFLAGS $flag -Werror"
        if test "$SYSTEM_LIBCMIS" = TRUE; then
            CXXFLAGS="$CXXFLAGS -DSYSTEM_LIBCMIS $LIBCMIS_CFLAGS"
        fi
        AC_LANG_PUSH([C++])
        AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
            #include <algorithm>
            #include <functional>
            #include <vector>

            #if defined SYSTEM_LIBCMIS
            // See ucb/source/ucp/cmis/auth_provider.hxx:
            #if !defined __clang__
            #pragma GCC diagnostic push
            #pragma GCC diagnostic ignored "-Wdeprecated"
            #pragma GCC diagnostic ignored "-Wunused-but-set-parameter"
            #endif
            #include <libcmis/libcmis.hxx>
            #if !defined __clang__
            #pragma GCC diagnostic pop
            #endif
            #endif

            void f(std::vector<int> & v, std::function<bool(int, int)> fn) {
                std::sort(v.begin(), v.end(), fn);
            }
            ]])],[CXXFLAGS_CXX11=$flag])
        AC_LANG_POP([C++])
        CXXFLAGS=$save_CXXFLAGS
        if test -n "$CXXFLAGS_CXX11"; then
            break
        fi
    done
fi
if test -n "$CXXFLAGS_CXX11"; then
    AC_MSG_RESULT([yes ($CXXFLAGS_CXX11)])
else
    AC_MSG_ERROR(no)
fi
AC_SUBST(CXXFLAGS_CXX11)

if test "$GCC" = "yes"; then
    save_CXXFLAGS=$CXXFLAGS
    CXXFLAGS="$CXXFLAGS $CXXFLAGS_CXX11"
    CHECK_L_ATOMIC
    CXXFLAGS=$save_CXXFLAGS
    AC_SUBST(ATOMIC_LIB)
fi

dnl Test for temporarily incompatible libstdc++ 4.7.{0,1}, where
dnl <https://gcc.gnu.org/viewcvs/gcc?view=revision&revision=179528> introduced
dnl an additional member _M_size into C++11 std::list towards 4.7.0 and
dnl <https://gcc.gnu.org/viewcvs/gcc?view=revision&revision=189186> removed it
dnl again towards 4.7.2:
if test $CPP_LIBRARY = GLIBCXX; then
    AC_MSG_CHECKING([whether using C++11 causes libstdc++ 4.7.0/4.7.1 ABI breakage])
    AC_LANG_PUSH([C++])
    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
#include <list>
#if !defined __GLIBCXX__ || (__GLIBCXX__ != 20120322 && __GLIBCXX__ != 20120614)
    // according to <https://gcc.gnu.org/onlinedocs/libstdc++/manual/abi.html>:
    //   GCC 4.7.0: 20120322
    //   GCC 4.7.1: 20120614
    // and using a range check is not possible as the mapping between
    // __GLIBCXX__ values and GCC versions is not monotonic
/* ok */
#else
abi broken
#endif
        ]])], [AC_MSG_RESULT(no, ok)],
        [AC_MSG_ERROR(yes)])
    AC_LANG_POP([C++])
fi

AC_MSG_CHECKING([whether $CXX_BASE supports C++11 without Language Defect 757])
save_CXXFLAGS=$CXXFLAGS
CXXFLAGS="$CXXFLAGS $CXXFLAGS_CXX11"
AC_LANG_PUSH([C++])

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
#include <stddef.h>

template <typename T, size_t S> char (&sal_n_array_size( T(&)[S] ))[S];

namespace
{
        struct b
        {
                int i;
                int j;
        };
}
]], [[
struct a
{
        int i;
        int j;
};
a thinga[]={{0,0}, {1,1}};
b thingb[]={{0,0}, {1,1}};
size_t i = sizeof(sal_n_array_size(thinga));
size_t j = sizeof(sal_n_array_size(thingb));
return !(i != 0 && j != 0);
]])
    ], [ AC_MSG_RESULT(yes) ],
    [ AC_MSG_ERROR(no)])
AC_LANG_POP([C++])
CXXFLAGS=$save_CXXFLAGS

HAVE_GCC_FNO_SIZED_DEALLOCATION=
if test "$GCC" = yes; then
    AC_MSG_CHECKING([whether $CXX_BASE supports -fno-sized-deallocation])
    AC_LANG_PUSH([C++])
    save_CXXFLAGS=$CXXFLAGS
    CXXFLAGS="$CXXFLAGS -fno-sized-deallocation"
    AC_LINK_IFELSE([AC_LANG_PROGRAM()],[HAVE_GCC_FNO_SIZED_DEALLOCATION=TRUE])
    CXXFLAGS=$save_CXXFLAGS
    AC_LANG_POP([C++])
    if test "$HAVE_GCC_FNO_SIZED_DEALLOCATION" = TRUE; then
        AC_MSG_RESULT([yes])
    else
        AC_MSG_RESULT([no])
    fi
fi
AC_SUBST([HAVE_GCC_FNO_SIZED_DEALLOCATION])

AC_MSG_CHECKING([whether $CXX_BASE supports C++2a constinit sorted vectors])
AC_LANG_PUSH([C++])
save_CXXFLAGS=$CXXFLAGS
CXXFLAGS="$CXXFLAGS $CXXFLAGS_CXX11"
AC_COMPILE_IFELSE([AC_LANG_SOURCE([
        #include <algorithm>
        #include <initializer_list>
        #include <vector>
        template<typename T> class S {
        private:
            std::vector<T> v_;
        public:
            constexpr S(std::initializer_list<T> i): v_(i) { std::sort(v_.begin(), v_.end()); }
        };
        constinit S<int> s{3, 2, 1};
    ])], [
        AC_DEFINE([HAVE_CPP_CONSTINIT_SORTED_VECTOR],[1])
        AC_MSG_RESULT([yes])
    ], [AC_MSG_RESULT([no])])
CXXFLAGS=$save_CXXFLAGS
AC_LANG_POP([C++])

AC_MSG_CHECKING([whether $CXX_BASE supports C++2a <span> with unsigned size_type])
AC_LANG_PUSH([C++])
save_CXXFLAGS=$CXXFLAGS
CXXFLAGS="$CXXFLAGS $CXXFLAGS_CXX11"
AC_COMPILE_IFELSE([AC_LANG_SOURCE([
        #include <span>
        #include <type_traits>
        // Don't check size_type directly, as it was called index_type before P1872R0:
        void f(std::span<int> s) { static_assert(std::is_unsigned_v<decltype(s.size())>); };
    ])], [
        AC_DEFINE([HAVE_CPP_SPAN],[1])
        AC_MSG_RESULT([yes])
    ], [AC_MSG_RESULT([no])])
CXXFLAGS=$save_CXXFLAGS
AC_LANG_POP([C++])

AC_MSG_CHECKING([whether $CXX_BASE implements C++ DR P1155R3])
AC_LANG_PUSH([C++])
save_CXXFLAGS=$CXXFLAGS
CXXFLAGS="$CXXFLAGS $CXXFLAGS_CXX11"
AC_COMPILE_IFELSE([AC_LANG_SOURCE([
        struct S1 { S1(S1 &&); };
        struct S2: S1 {};
        S1 f(S2 s) { return s; }
    ])], [
        AC_DEFINE([HAVE_P1155R3],[1])
        AC_MSG_RESULT([yes])
    ], [AC_MSG_RESULT([no])])
CXXFLAGS=$save_CXXFLAGS
AC_LANG_POP([C++])

AC_MSG_CHECKING([whether $CXX_BASE supports C++20 std::atomic_ref])
HAVE_CXX20_ATOMIC_REF=
AC_LANG_PUSH([C++])
save_CXXFLAGS=$CXXFLAGS
CXXFLAGS="$CXXFLAGS $CXXFLAGS_CXX11"
AC_COMPILE_IFELSE([AC_LANG_SOURCE([
        #include <atomic>
        int x;
        std::atomic_ref<int> y(x);
    ])], [
        HAVE_CXX20_ATOMIC_REF=TRUE
        AC_MSG_RESULT([yes])
    ], [AC_MSG_RESULT([no])])
CXXFLAGS=$save_CXXFLAGS
AC_LANG_POP([C++])
AC_SUBST([HAVE_CXX20_ATOMIC_REF])

dnl Supported since GCC 9 and Clang 10 (which each also started to support -Wdeprecated-copy, but
dnl which is included in -Wextra anyway):
HAVE_WDEPRECATED_COPY_DTOR=
if test "$GCC" = yes; then
    AC_MSG_CHECKING([whether $CXX_BASE supports -Wdeprecated-copy-dtor])
    AC_LANG_PUSH([C++])
    save_CXXFLAGS=$CXXFLAGS
    CXXFLAGS="$CXXFLAGS -Werror -Wdeprecated-copy-dtor"
    AC_COMPILE_IFELSE([AC_LANG_SOURCE()], [
            HAVE_WDEPRECATED_COPY_DTOR=TRUE
            AC_MSG_RESULT([yes])
        ], [AC_MSG_RESULT([no])])
    CXXFLAGS=$save_CXXFLAGS
    AC_LANG_POP([C++])
fi
AC_SUBST([HAVE_WDEPRECATED_COPY_DTOR])

dnl At least GCC 8.2 with -O2 (i.e., --enable-optimized) causes a false-positive -Wmaybe-
dnl uninitialized warning for code like
dnl
dnl   OString f();
dnl   boost::optional<OString> * g(bool b) {
dnl       boost::optional<OString> o;
dnl       if (b) o = f();
dnl       return new boost::optional<OString>(o);
dnl   }
dnl
dnl (as is e.g. present, in a slightly more elaborate form, in
dnl librdf_TypeConverter::extractNode_NoLock in unoxml/source/rdf/librdf_repository.cxx); the below
dnl code is meant to be a faithfully stripped-down and self-contained version of the above code:
HAVE_BROKEN_GCC_WMAYBE_UNINITIALIZED=
if test "$GCC" = yes && test "$COM_IS_CLANG" != TRUE; then
    AC_MSG_CHECKING([whether $CXX_BASE might report false -Werror=maybe-uninitialized])
    AC_LANG_PUSH([C++])
    save_CXXFLAGS=$CXXFLAGS
    CXXFLAGS="$CXXFLAGS $CXXFLAGS_CXX11 -Werror -Wmaybe-uninitialized"
    if test "$ENABLE_OPTIMIZED" = TRUE; then
        CXXFLAGS="$CXXFLAGS -O2"
    else
        CXXFLAGS="$CXXFLAGS -O0"
    fi
    AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
            #include <new>
            void f1(int);
            struct S1 {
                ~S1() { f1(n); }
                int n = 0;
            };
            struct S2 {
                S2() {}
                S2(S2 const & s) { if (s.init) set(*reinterpret_cast<S1 const *>(s.stg)); }
                ~S2() { if (init) reinterpret_cast<S1 *>(stg)->S1::~S1(); }
                void set(S1 s) {
                    new (stg) S1(s);
                    init = true;
                }
                bool init = false;
                char stg[sizeof (S1)];
            } ;
            S1 f2();
            S2 * f3(bool b) {
                S2 o;
                if (b) o.set(f2());
                return new S2(o);
            }
        ]])], [AC_MSG_RESULT([no])], [
            HAVE_BROKEN_GCC_WMAYBE_UNINITIALIZED=TRUE
            AC_MSG_RESULT([yes])
        ])
    CXXFLAGS=$save_CXXFLAGS
    AC_LANG_POP([C++])
fi
AC_SUBST([HAVE_BROKEN_GCC_WMAYBE_UNINITIALIZED])

dnl Check for <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=87296#c5> "[8/9/10/11 Regression]
dnl -Wstringop-overflow false positive due to using MEM_REF type of &MEM" (fixed in GCC 11), which
dnl hits us e.g. with GCC 10 and --enable-optimized at
dnl
dnl   In file included from include/rtl/string.hxx:49,
dnl                    from include/rtl/ustring.hxx:43,
dnl                    from include/osl/file.hxx:35,
dnl                    from include/codemaker/global.hxx:28,
dnl                    from include/codemaker/options.hxx:23,
dnl                    from codemaker/source/commoncpp/commoncpp.cxx:24:
dnl   In function ‘char* rtl::addDataHelper(char*, const char*, std::size_t)’,
dnl       inlined from ‘static char* rtl::ToStringHelper<const char [N]>::addData(char*, const char*) [with long unsigned int N = 3]’ at include/rtl/stringconcat.hxx:147:85,
dnl       inlined from ‘char* rtl::OStringConcat<T1, T2>::addData(char*) const [with T1 = const char [3]; T2 = rtl::OString]’ at include/rtl/stringconcat.hxx:226:103,
dnl       inlined from ‘rtl::OStringBuffer& rtl::OStringBuffer::append(rtl::OStringConcat<T1, T2>&&) [with T1 = const char [3]; T2 = rtl::OString]’ at include/rtl/strbuf.hxx:599:30,
dnl       inlined from ‘rtl::OString codemaker::cpp::scopedCppName(const rtl::OString&, bool)’ at codemaker/source/commoncpp/commoncpp.cxx:53:55:
dnl   include/rtl/stringconcat.hxx:78:15: error: writing 2 bytes into a region of size 1 [-Werror=stringop-overflow=]
dnl      78 |         memcpy( buffer, data, length );
dnl         |         ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~
HAVE_BROKEN_GCC_WSTRINGOP_OVERFLOW=
if test "$GCC" = yes && test "$COM_IS_CLANG" != TRUE; then
    AC_MSG_CHECKING([whether $CXX_BASE might report false -Werror=stringop-overflow=])
    AC_LANG_PUSH([C++])
    save_CXXFLAGS=$CXXFLAGS
    CXXFLAGS="$CXXFLAGS $CXXFLAGS_CXX11 -Werror -Wstringop-overflow"
    if test "$ENABLE_OPTIMIZED" = TRUE; then
        CXXFLAGS="$CXXFLAGS -O2"
    else
        CXXFLAGS="$CXXFLAGS -O0"
    fi
    dnl Test code taken from <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=87296#c0>:
    AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
            void fill(char const * begin, char const * end, char c);
            struct q {
                char ids[4];
                char username[6];
            };
            void test(q & c) {
                fill(c.ids, c.ids + sizeof(c.ids), '\0');
                __builtin_strncpy(c.username, "root", sizeof(c.username));
            }
        ]])], [AC_MSG_RESULT([no])], [
            HAVE_BROKEN_GCC_WSTRINGOP_OVERFLOW=TRUE
            AC_MSG_RESULT([yes])
        ])
    CXXFLAGS=$save_CXXFLAGS
    AC_LANG_POP([C++])
fi
AC_SUBST([HAVE_BROKEN_GCC_WSTRINGOP_OVERFLOW])

HAVE_DLLEXPORTINLINES=
if test "$_os" = "WINNT"; then
    AC_MSG_CHECKING([whether $CXX_BASE supports -Zc:dllexportInlines-])
    AC_LANG_PUSH([C++])
    save_CXXFLAGS=$CXXFLAGS
    CXXFLAGS="$CXXFLAGS -Werror -Zc:dllexportInlines-"
    AC_COMPILE_IFELSE([AC_LANG_SOURCE()], [
            HAVE_DLLEXPORTINLINES=TRUE
            AC_MSG_RESULT([yes])
        ], [AC_MSG_RESULT([no])])
    CXXFLAGS=$save_CXXFLAGS
    AC_LANG_POP([C++])
fi
AC_SUBST([HAVE_DLLEXPORTINLINES])

dnl ===================================================================
dnl CPU Intrinsics support - SSE, AVX
dnl ===================================================================

CXXFLAGS_INTRINSICS_SSE2=
CXXFLAGS_INTRINSICS_SSSE3=
CXXFLAGS_INTRINSICS_SSE41=
CXXFLAGS_INTRINSICS_SSE42=
CXXFLAGS_INTRINSICS_AVX=
CXXFLAGS_INTRINSICS_AVX2=
CXXFLAGS_INTRINSICS_AVX512=
CXXFLAGS_INTRINSICS_AVX512F=
CXXFLAGS_INTRINSICS_F16C=
CXXFLAGS_INTRINSICS_FMA=

if test "$GCC" = "yes" -o "$COM_IS_CLANG" = TRUE; then
    # GCC, Clang or Clang-cl (clang-cl + MSVC's -arch options don't work well together)
    flag_sse2=-msse2
    flag_ssse3=-mssse3
    flag_sse41=-msse4.1
    flag_sse42=-msse4.2
    flag_avx=-mavx
    flag_avx2=-mavx2
    flag_avx512="-mavx512f -mavx512vl -mavx512bw -mavx512dq -mavx512cd"
    flag_avx512f=-mavx512f
    flag_f16c=-mf16c
    flag_fma=-mfma
else
    # https://docs.microsoft.com/en-us/cpp/build/reference/arch-x86
    # MSVC seems to differentiate only between SSE and SSE2, where in fact
    # SSE2 seems to be SSE2+.
    # Even if -arch:SSE2 is the default, set it explicitly, so that the variable
    # is not empty (and can be tested in gbuild).
    flag_sse2=-arch:SSE2
    flag_ssse3=-arch:SSE2
    flag_sse41=-arch:SSE2
    flag_sse42=-arch:SSE2
    flag_avx=-arch:AVX
    flag_avx2=-arch:AVX2
    flag_avx512=-arch:AVX512
    flag_avx512f=-arch:AVX512
    # These are part of -arch:AVX2
    flag_f16c=-arch:AVX2
    flag_fma=-arch:AVX2
fi

AC_MSG_CHECKING([whether $CXX can compile SSE2 intrinsics])
AC_LANG_PUSH([C++])
save_CXXFLAGS=$CXXFLAGS
CXXFLAGS="$CXXFLAGS $flag_sse2"
AC_COMPILE_IFELSE([AC_LANG_SOURCE([
    #include <emmintrin.h>
    int main () {
        __m128i a = _mm_set1_epi32 (0), b = _mm_set1_epi32 (0), c;
        c = _mm_xor_si128 (a, b);
        return 0;
    }
    ])],
    [can_compile_sse2=yes],
    [can_compile_sse2=no])
AC_LANG_POP([C++])
CXXFLAGS=$save_CXXFLAGS
AC_MSG_RESULT([${can_compile_sse2}])
if test "${can_compile_sse2}" = "yes" ; then
    CXXFLAGS_INTRINSICS_SSE2="$flag_sse2"
fi

AC_MSG_CHECKING([whether $CXX can compile SSSE3 intrinsics])
AC_LANG_PUSH([C++])
save_CXXFLAGS=$CXXFLAGS
CXXFLAGS="$CXXFLAGS $flag_ssse3"
AC_COMPILE_IFELSE([AC_LANG_SOURCE([
    #include <tmmintrin.h>
    int main () {
        __m128i a = _mm_set1_epi32 (0), b = _mm_set1_epi32 (0), c;
        c = _mm_maddubs_epi16 (a, b);
        return 0;
    }
    ])],
    [can_compile_ssse3=yes],
    [can_compile_ssse3=no])
AC_LANG_POP([C++])
CXXFLAGS=$save_CXXFLAGS
AC_MSG_RESULT([${can_compile_ssse3}])
if test "${can_compile_ssse3}" = "yes" ; then
    CXXFLAGS_INTRINSICS_SSSE3="$flag_ssse3"
fi

AC_MSG_CHECKING([whether $CXX can compile SSE4.1 intrinsics])
AC_LANG_PUSH([C++])
save_CXXFLAGS=$CXXFLAGS
CXXFLAGS="$CXXFLAGS $flag_sse41"
AC_COMPILE_IFELSE([AC_LANG_SOURCE([
    #include <smmintrin.h>
    int main () {
        __m128i a = _mm_set1_epi32 (0), b = _mm_set1_epi32 (0), c;
        c = _mm_cmpeq_epi64 (a, b);
        return 0;
    }
    ])],
    [can_compile_sse41=yes],
    [can_compile_sse41=no])
AC_LANG_POP([C++])
CXXFLAGS=$save_CXXFLAGS
AC_MSG_RESULT([${can_compile_sse41}])
if test "${can_compile_sse41}" = "yes" ; then
    CXXFLAGS_INTRINSICS_SSE41="$flag_sse41"
fi

AC_MSG_CHECKING([whether $CXX can compile SSE4.2 intrinsics])
AC_LANG_PUSH([C++])
save_CXXFLAGS=$CXXFLAGS
CXXFLAGS="$CXXFLAGS $flag_sse42"
AC_COMPILE_IFELSE([AC_LANG_SOURCE([
    #include <nmmintrin.h>
    int main () {
        __m128i a = _mm_set1_epi32 (0), b = _mm_set1_epi32 (0), c;
        c = _mm_cmpgt_epi64 (a, b);
        return 0;
    }
    ])],
    [can_compile_sse42=yes],
    [can_compile_sse42=no])
AC_LANG_POP([C++])
CXXFLAGS=$save_CXXFLAGS
AC_MSG_RESULT([${can_compile_sse42}])
if test "${can_compile_sse42}" = "yes" ; then
    CXXFLAGS_INTRINSICS_SSE42="$flag_sse42"
fi

AC_MSG_CHECKING([whether $CXX can compile AVX intrinsics])
AC_LANG_PUSH([C++])
save_CXXFLAGS=$CXXFLAGS
CXXFLAGS="$CXXFLAGS $flag_avx"
AC_COMPILE_IFELSE([AC_LANG_SOURCE([
    #include <immintrin.h>
    int main () {
        __m256 a = _mm256_set1_ps (0.0f), b = _mm256_set1_ps (0.0f), c;
        c = _mm256_xor_ps(a, b);
        return 0;
    }
    ])],
    [can_compile_avx=yes],
    [can_compile_avx=no])
AC_LANG_POP([C++])
CXXFLAGS=$save_CXXFLAGS
AC_MSG_RESULT([${can_compile_avx}])
if test "${can_compile_avx}" = "yes" ; then
    CXXFLAGS_INTRINSICS_AVX="$flag_avx"
fi

AC_MSG_CHECKING([whether $CXX can compile AVX2 intrinsics])
AC_LANG_PUSH([C++])
save_CXXFLAGS=$CXXFLAGS
CXXFLAGS="$CXXFLAGS $flag_avx2"
AC_COMPILE_IFELSE([AC_LANG_SOURCE([
    #include <immintrin.h>
    int main () {
        __m256i a = _mm256_set1_epi32 (0), b = _mm256_set1_epi32 (0), c;
        c = _mm256_maddubs_epi16(a, b);
        return 0;
    }
    ])],
    [can_compile_avx2=yes],
    [can_compile_avx2=no])
AC_LANG_POP([C++])
CXXFLAGS=$save_CXXFLAGS
AC_MSG_RESULT([${can_compile_avx2}])
if test "${can_compile_avx2}" = "yes" ; then
    CXXFLAGS_INTRINSICS_AVX2="$flag_avx2"
fi

AC_MSG_CHECKING([whether $CXX can compile AVX512 intrinsics])
AC_LANG_PUSH([C++])
save_CXXFLAGS=$CXXFLAGS
CXXFLAGS="$CXXFLAGS $flag_avx512"
AC_COMPILE_IFELSE([AC_LANG_SOURCE([
    #include <immintrin.h>
    int main () {
        __m512i a = _mm512_loadu_si512(0);
        __m512d v1 = _mm512_load_pd(0);
        // https://gcc.gnu.org/git/?p=gcc.git;a=commit;f=gcc/config/i386/avx512fintrin.h;h=23bce99cbe7016a04e14c2163ed3fe6a5a64f4e2
        __m512d v2 = _mm512_abs_pd(v1);
        return 0;
    }
    ])],
    [can_compile_avx512=yes],
    [can_compile_avx512=no])
AC_LANG_POP([C++])
CXXFLAGS=$save_CXXFLAGS
AC_MSG_RESULT([${can_compile_avx512}])
if test "${can_compile_avx512}" = "yes" ; then
    CXXFLAGS_INTRINSICS_AVX512="$flag_avx512"
    CXXFLAGS_INTRINSICS_AVX512F="$flag_avx512f"
fi

AC_MSG_CHECKING([whether $CXX can compile F16C intrinsics])
AC_LANG_PUSH([C++])
save_CXXFLAGS=$CXXFLAGS
CXXFLAGS="$CXXFLAGS $flag_f16c"
AC_COMPILE_IFELSE([AC_LANG_SOURCE([
    #include <immintrin.h>
    int main () {
        __m128i a = _mm_set1_epi32 (0);
        __m128 c;
        c = _mm_cvtph_ps(a);
        return 0;
    }
    ])],
    [can_compile_f16c=yes],
    [can_compile_f16c=no])
AC_LANG_POP([C++])
CXXFLAGS=$save_CXXFLAGS
AC_MSG_RESULT([${can_compile_f16c}])
if test "${can_compile_f16c}" = "yes" ; then
    CXXFLAGS_INTRINSICS_F16C="$flag_f16c"
fi

AC_MSG_CHECKING([whether $CXX can compile FMA intrinsics])
AC_LANG_PUSH([C++])
save_CXXFLAGS=$CXXFLAGS
CXXFLAGS="$CXXFLAGS $flag_fma"
AC_COMPILE_IFELSE([AC_LANG_SOURCE([
    #include <immintrin.h>
    int main () {
        __m256 a = _mm256_set1_ps (0.0f), b = _mm256_set1_ps (0.0f), c = _mm256_set1_ps (0.0f), d;
        d = _mm256_fmadd_ps(a, b, c);
        return 0;
    }
    ])],
    [can_compile_fma=yes],
    [can_compile_fma=no])
AC_LANG_POP([C++])
CXXFLAGS=$save_CXXFLAGS
AC_MSG_RESULT([${can_compile_fma}])
if test "${can_compile_fma}" = "yes" ; then
    CXXFLAGS_INTRINSICS_FMA="$flag_fma"
fi

AC_SUBST([CXXFLAGS_INTRINSICS_SSE2])
AC_SUBST([CXXFLAGS_INTRINSICS_SSSE3])
AC_SUBST([CXXFLAGS_INTRINSICS_SSE41])
AC_SUBST([CXXFLAGS_INTRINSICS_SSE42])
AC_SUBST([CXXFLAGS_INTRINSICS_AVX])
AC_SUBST([CXXFLAGS_INTRINSICS_AVX2])
AC_SUBST([CXXFLAGS_INTRINSICS_AVX512])
AC_SUBST([CXXFLAGS_INTRINSICS_AVX512F])
AC_SUBST([CXXFLAGS_INTRINSICS_F16C])
AC_SUBST([CXXFLAGS_INTRINSICS_FMA])

dnl ===================================================================
dnl system stl sanity tests
dnl ===================================================================
if test "$_os" != "WINNT"; then

    AC_LANG_PUSH([C++])

    save_CPPFLAGS="$CPPFLAGS"
    if test -n "$MACOSX_SDK_PATH"; then
        CPPFLAGS="-isysroot $MACOSX_SDK_PATH $CPPFLAGS"
    fi

    # Assume visibility is not broken with libc++. The below test is very much designed for libstdc++
    # only.
    if test "$CPP_LIBRARY" = GLIBCXX; then
        dnl gcc#19664, gcc#22482, rhbz#162935
        AC_MSG_CHECKING([if STL headers are visibility safe (GCC bug 22482)])
        AC_EGREP_HEADER(visibility push, string, stlvisok=yes, stlvisok=no)
        AC_MSG_RESULT([$stlvisok])
        if test "$stlvisok" = "no"; then
            AC_MSG_ERROR([Your libstdc++ headers are not visibility safe. This is no longer supported.])
        fi
    fi

    # As the below test checks things when linking self-compiled dynamic libraries, it presumably is irrelevant
    # when we don't make any dynamic libraries?
    if test "$DISABLE_DYNLOADING" = ""; then
        AC_MSG_CHECKING([if $CXX_BASE is -fvisibility-inlines-hidden safe (Clang bug 11250)])
        cat > conftestlib1.cc <<_ACEOF
template<typename T> struct S1 { virtual ~S1() {} virtual void f() {} };
struct S2: S1<int> { virtual ~S2(); };
S2::~S2() {}
_ACEOF
        cat > conftestlib2.cc <<_ACEOF
template<typename T> struct S1 { virtual ~S1() {} virtual void f() {} };
struct S2: S1<int> { virtual ~S2(); };
struct S3: S2 { virtual ~S3(); }; S3::~S3() {}
_ACEOF
        gccvisinlineshiddenok=yes
        if ! $CXX $CXXFLAGS $CPPFLAGS $LINKFLAGSSHL -fPIC -fvisibility-inlines-hidden conftestlib1.cc -o libconftest1$DLLPOST >/dev/null 2>&5; then
            gccvisinlineshiddenok=no
        else
            dnl At least Clang -fsanitize=address and -fsanitize=undefined are
            dnl known to not work with -z defs (unsetting which makes the test
            dnl moot, though):
            my_linkflagsnoundefs=$LINKFLAGSNOUNDEFS
            if test "$COM_IS_CLANG" = TRUE; then
                for i in $CXX $CXXFLAGS; do
                    case $i in
                    -fsanitize=*)
                        my_linkflagsnoundefs=
                        break
                        ;;
                    esac
                done
            fi
            if ! $CXX $CXXFLAGS $CPPFLAGS $LINKFLAGSSHL -fPIC -fvisibility-inlines-hidden conftestlib2.cc -L. -lconftest1 $my_linkflagsnoundefs -o libconftest2$DLLPOST >/dev/null 2>&5; then
                gccvisinlineshiddenok=no
            fi
        fi

        rm -fr libconftest*
        AC_MSG_RESULT([$gccvisinlineshiddenok])
        if test "$gccvisinlineshiddenok" = "no"; then
            AC_MSG_ERROR([Your gcc/clang is not -fvisibility-inlines-hidden safe. This is no longer supported.])
        fi
    fi

   AC_MSG_CHECKING([if $CXX_BASE has a visibility bug with class-level attributes (GCC bug 26905)])
    cat >visibility.cxx <<_ACEOF
#pragma GCC visibility push(hidden)
struct __attribute__ ((visibility ("default"))) TestStruct {
  static void Init();
};
__attribute__ ((visibility ("default"))) void TestFunc() {
  TestStruct::Init();
}
_ACEOF
    if ! $CXX $CXXFLAGS $CPPFLAGS -fpic -S visibility.cxx; then
        gccvisbroken=yes
    else
        case "$host_cpu" in
        i?86|x86_64)
            if test "$_os" = "Darwin" -o "$_os" = "iOS"; then
                gccvisbroken=no
            else
                if $EGREP -q '@PLT|@GOT' visibility.s || test "$ENABLE_LTO" = "TRUE"; then
                    gccvisbroken=no
                else
                    gccvisbroken=yes
                fi
            fi
            ;;
        *)
            gccvisbroken=no
            ;;
        esac
    fi
    rm -f visibility.s visibility.cxx

    AC_MSG_RESULT([$gccvisbroken])
    if test "$gccvisbroken" = "yes"; then
        AC_MSG_ERROR([Your gcc is not -fvisibility=hidden safe. This is no longer supported.])
    fi

    CPPFLAGS="$save_CPPFLAGS"

    AC_LANG_POP([C++])
fi

dnl ===================================================================
dnl  Clang++ tests
dnl ===================================================================

HAVE_GCC_FNO_ENFORCE_EH_SPECS=
if test "$GCC" = "yes"; then
    AC_MSG_CHECKING([whether $CXX_BASE supports -fno-enforce-eh-specs])
    AC_LANG_PUSH([C++])
    save_CXXFLAGS=$CXXFLAGS
    CXXFLAGS="$CFLAGS -Werror -fno-enforce-eh-specs"
    AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[ return 0; ]])],[ HAVE_GCC_FNO_ENFORCE_EH_SPECS=TRUE ],[])
    CXXFLAGS=$save_CXXFLAGS
    AC_LANG_POP([C++])
    if test "$HAVE_GCC_FNO_ENFORCE_EH_SPECS" = "TRUE"; then
        AC_MSG_RESULT([yes])
    else
        AC_MSG_RESULT([no])
    fi
fi
AC_SUBST(HAVE_GCC_FNO_ENFORCE_EH_SPECS)

dnl ===================================================================
dnl Compiler plugins
dnl ===================================================================

COMPILER_PLUGINS=
# currently only Clang

if test "$COM_IS_CLANG" != "TRUE"; then
    if test "$libo_fuzzed_enable_compiler_plugins" = yes -a "$enable_compiler_plugins" = yes; then
        AC_MSG_NOTICE([Resetting --enable-compiler-plugins=no])
        enable_compiler_plugins=no
    fi
fi

COMPILER_PLUGINS_COM_IS_CLANG=
if test "$COM_IS_CLANG" = "TRUE"; then
    if test -n "$enable_compiler_plugins"; then
        compiler_plugins="$enable_compiler_plugins"
    elif test -n "$ENABLE_DBGUTIL"; then
        compiler_plugins=test
    else
        compiler_plugins=no
    fi
    if test "$compiler_plugins" != no -a "$my_apple_clang" != yes; then
        if test "$CLANGVER" -lt 50002; then
            if test "$compiler_plugins" = yes; then
                AC_MSG_ERROR([Clang $CLANGVER is too old to build compiler plugins; need >= 5.0.2.])
            else
                compiler_plugins=no
            fi
        fi
    fi
    if test "$compiler_plugins" != "no"; then
        dnl The prefix where Clang resides, override to where Clang resides if
        dnl using a source build:
        if test -z "$CLANGDIR"; then
            CLANGDIR=$(dirname $(dirname $($CXX -print-prog-name=$(basename $(printf '%s\n' $CXX | grep clang | head -n 1)))))
        fi
        # Assume Clang is self-built, but allow overriding COMPILER_PLUGINS_CXX to the compiler Clang was built with.
        if test -z "$COMPILER_PLUGINS_CXX"; then
            COMPILER_PLUGINS_CXX=[$(echo $CXX | sed -e 's/-fsanitize=[^ ]*//g')]
        fi
        clangbindir=$CLANGDIR/bin
        if test "$build_os" = "cygwin"; then
            clangbindir=$(cygpath -u "$clangbindir")
        fi
        AC_PATH_PROG(LLVM_CONFIG, llvm-config,[],"$clangbindir" $PATH)
        if test -n "$LLVM_CONFIG"; then
            COMPILER_PLUGINS_CXXFLAGS=$($LLVM_CONFIG --cxxflags)
            COMPILER_PLUGINS_LINKFLAGS=$($LLVM_CONFIG --ldflags --libs --system-libs | tr '\n' ' ')
            if test -z "$CLANGLIBDIR"; then
                CLANGLIBDIR=$($LLVM_CONFIG --libdir)
            fi
            # Try if clang is built from source (in which case its includes are not together with llvm includes).
            # src-root is [llvm-toplevel-src-dir]/llvm, clang is [llvm-toplevel-src-dir]/clang
            clangsrcdir=$(dirname $($LLVM_CONFIG --src-root))
            if test -n "$clangsrcdir" -a -d "$clangsrcdir" -a -d "$clangsrcdir/clang/include"; then
                COMPILER_PLUGINS_CXXFLAGS="$COMPILER_PLUGINS_CXXFLAGS -I$clangsrcdir/clang/include"
            fi
            # obj-root is [llvm-toplevel-obj-dir]/, clang is [llvm-toplevel-obj-dir]/tools/clang
            clangobjdir=$($LLVM_CONFIG --obj-root)
            if test -n "$clangobjdir" -a -d "$clangobjdir" -a -d "$clangobjdir/tools/clang/include"; then
                COMPILER_PLUGINS_CXXFLAGS="$COMPILER_PLUGINS_CXXFLAGS -I$clangobjdir/tools/clang/include"
            fi
        fi
        AC_MSG_NOTICE([compiler plugins compile flags: $COMPILER_PLUGINS_CXXFLAGS])
        AC_LANG_PUSH([C++])
        save_CXX=$CXX
        save_CXXCPP=$CXXCPP
        save_CPPFLAGS=$CPPFLAGS
        save_CXXFLAGS=$CXXFLAGS
        save_LDFLAGS=$LDFLAGS
        save_LIBS=$LIBS
        CXX=$COMPILER_PLUGINS_CXX
        CXXCPP="$COMPILER_PLUGINS_CXX -E"
        CPPFLAGS="$COMPILER_PLUGINS_CXXFLAGS"
        CXXFLAGS="$COMPILER_PLUGINS_CXXFLAGS"
        AC_CHECK_HEADER(clang/Basic/SourceLocation.h,
            [COMPILER_PLUGINS=TRUE],
            [
            if test "$compiler_plugins" = "yes"; then
                AC_MSG_ERROR([Cannot find Clang headers to build compiler plugins.])
            else
                AC_MSG_WARN([Cannot find Clang headers to build compiler plugins, plugins disabled])
                add_warning "Cannot find Clang headers to build compiler plugins, plugins disabled."
            fi
            ])
        dnl TODO: Windows doesn't use LO_CLANG_SHARED_PLUGINS for now, see corresponding TODO
        dnl comment in compilerplugins/Makefile-clang.mk:
        if test -n "$COMPILER_PLUGINS" && test "$_os" != "WINNT"; then
            LDFLAGS=""
            AC_MSG_CHECKING([for clang libraries to use])
            if test -z "$CLANGTOOLLIBS"; then
                LIBS="-lclangTooling -lclangFrontend -lclangDriver -lclangParse -lclangSema -lclangEdit \
 -lclangAnalysis -lclangAST -lclangLex -lclangSerialization -lclangBasic $COMPILER_PLUGINS_LINKFLAGS"
                AC_LINK_IFELSE([
                    AC_LANG_PROGRAM([[#include "clang/Basic/SourceLocation.h"]],
                        [[ clang::FullSourceLoc().dump(); ]])
                ],[CLANGTOOLLIBS="$LIBS"],[])
            fi
            if test -z "$CLANGTOOLLIBS"; then
                LIBS="-lclang-cpp $COMPILER_PLUGINS_LINKFLAGS"
                AC_LINK_IFELSE([
                    AC_LANG_PROGRAM([[#include "clang/Basic/SourceLocation.h"]],
                        [[ clang::FullSourceLoc().dump(); ]])
                ],[CLANGTOOLLIBS="$LIBS"],[])
            fi
            AC_MSG_RESULT([$CLANGTOOLLIBS])
            if test -z "$CLANGTOOLLIBS"; then
                if test "$compiler_plugins" = "yes"; then
                    AC_MSG_ERROR([Cannot find Clang libraries to build compiler plugins.])
                else
                    AC_MSG_WARN([Cannot find Clang libraries to build compiler plugins, plugins disabled])
                    add_warning "Cannot find Clang libraries to build compiler plugins, plugins disabled."
                fi
                COMPILER_PLUGINS=
            fi
            if test -n "$COMPILER_PLUGINS"; then
                if test -z "$CLANGSYSINCLUDE"; then
                    if test -n "$LLVM_CONFIG"; then
                        # Path to the clang system headers (no idea if there's a better way to get it).
                        CLANGSYSINCLUDE=$($LLVM_CONFIG --libdir)/clang/$($LLVM_CONFIG --version | sed 's/git\|svn//')/include
                    fi
                fi
            fi
        fi
        CXX=$save_CXX
        CXXCPP=$save_CXXCPP
        CPPFLAGS=$save_CPPFLAGS
        CXXFLAGS=$save_CXXFLAGS
        LDFLAGS=$save_LDFLAGS
        LIBS="$save_LIBS"
        AC_LANG_POP([C++])

        AC_MSG_CHECKING([whether the compiler for building compilerplugins is actually Clang])
        AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
            #ifndef __clang__
            you lose
            #endif
            int foo=42;
            ]])],
            [AC_MSG_RESULT([yes])
             COMPILER_PLUGINS_COM_IS_CLANG=TRUE],
            [AC_MSG_RESULT([no])])
        AC_SUBST(COMPILER_PLUGINS_COM_IS_CLANG)
    fi
else
    if test "$enable_compiler_plugins" = "yes"; then
        AC_MSG_ERROR([Compiler plugins are currently supported only with the Clang compiler.])
    fi
fi
COMPILER_PLUGINS_ANALYZER_PCH=
if test "$enable_compiler_plugins_analyzer_pch" != no; then
    COMPILER_PLUGINS_ANALYZER_PCH=TRUE
fi
AC_SUBST(COMPILER_PLUGINS)
AC_SUBST(COMPILER_PLUGINS_ANALYZER_PCH)
AC_SUBST(COMPILER_PLUGINS_COM_IS_CLANG)
AC_SUBST(COMPILER_PLUGINS_CXX)
AC_SUBST(COMPILER_PLUGINS_CXXFLAGS)
AC_SUBST(COMPILER_PLUGINS_CXX_LINKFLAGS)
AC_SUBST(COMPILER_PLUGINS_DEBUG)
AC_SUBST(COMPILER_PLUGINS_TOOLING_ARGS)
AC_SUBST(CLANGDIR)
AC_SUBST(CLANGLIBDIR)
AC_SUBST(CLANGTOOLLIBS)
AC_SUBST(CLANGSYSINCLUDE)

# Plugin to help linker.
# Add something like LD_PLUGIN=/usr/lib64/LLVMgold.so to your autogen.input.
# This makes --enable-lto build with clang work.
AC_SUBST(LD_PLUGIN)

AC_CHECK_FUNCS(posix_fallocate, HAVE_POSIX_FALLOCATE=YES, [HAVE_POSIX_FALLOCATE=NO])
AC_SUBST(HAVE_POSIX_FALLOCATE)

JITC_PROCESSOR_TYPE=""
if test "$_os" = "Linux" -a "$host_cpu" = "powerpc"; then
    # IBMs JDK needs this...
    JITC_PROCESSOR_TYPE=6
    export JITC_PROCESSOR_TYPE
fi
AC_SUBST([JITC_PROCESSOR_TYPE])

# Misc Windows Stuff
AC_ARG_WITH(ucrt-dir,
    AS_HELP_STRING([--with-ucrt-dir],
        [path to the directory with the arch-specific MSU packages of the Windows Universal CRT redistributables
        (MS KB 2999226) for packaging into the installsets (without those the target system needs to install
        the UCRT or Visual C++ Runtimes manually). The directory must contain the following 6 files:
            Windows6.1-KB2999226-x64.msu
            Windows6.1-KB2999226-x86.msu
            Windows8.1-KB2999226-x64.msu
            Windows8.1-KB2999226-x86.msu
            Windows8-RT-KB2999226-x64.msu
            Windows8-RT-KB2999226-x86.msu
        A zip archive including those files is available from Microsoft site:
        https://www.microsoft.com/en-us/download/details.aspx?id=48234]),
,)

UCRT_REDISTDIR="$with_ucrt_dir"
if test $_os = "WINNT"; then
    find_msvc_x64_dlls
    for i in $PKGFORMAT; do
        if test "$i" = msi; then
            find_msms
            break
        fi
    done
    MSVC_DLL_PATH=`win_short_path_for_make "$msvcdllpath"`
    MSVC_DLLS="$msvcdlls"
    test -n "$msmdir" && MSM_PATH=`win_short_path_for_make "$msmdir"`
    # MSVC 15.3 changed it to VC141
    if echo "$msvcdllpath" | grep -q "VC143.CRT$"; then
        SCPDEFS="$SCPDEFS -DWITH_VC143_REDIST"
    elif echo "$msvcdllpath" | grep -q "VC142.CRT$"; then
        SCPDEFS="$SCPDEFS -DWITH_VC142_REDIST"
    elif echo "$msvcdllpath" | grep -q "VC141.CRT$"; then
        SCPDEFS="$SCPDEFS -DWITH_VC141_REDIST"
    else
        SCPDEFS="$SCPDEFS -DWITH_VC${VCVER}_REDIST"
    fi

    if test "$UCRT_REDISTDIR" = "no"; then
        dnl explicitly disabled
        UCRT_REDISTDIR=""
    else
        if ! test -f "$UCRT_REDISTDIR/Windows6.1-KB2999226-x64.msu" -a \
                  -f "$UCRT_REDISTDIR/Windows6.1-KB2999226-x86.msu" -a \
                  -f "$UCRT_REDISTDIR/Windows8.1-KB2999226-x64.msu" -a \
                  -f "$UCRT_REDISTDIR/Windows8.1-KB2999226-x86.msu" -a \
                  -f "$UCRT_REDISTDIR/Windows8-RT-KB2999226-x64.msu" -a \
                  -f "$UCRT_REDISTDIR/Windows8-RT-KB2999226-x86.msu"; then
            UCRT_REDISTDIR=""
            if test -n "$PKGFORMAT"; then
               for i in $PKGFORMAT; do
                   case "$i" in
                   msi)
                       AC_MSG_WARN([--without-ucrt-dir not specified or MSUs not found - installer will have runtime dependency])
                       add_warning "--without-ucrt-dir not specified or MSUs not found - installer will have runtime dependency"
                       ;;
                   esac
               done
            fi
        fi
    fi
fi

AC_SUBST(UCRT_REDISTDIR)
AC_SUBST(MSVC_DLL_PATH)
AC_SUBST(MSVC_DLLS)
AC_SUBST(MSM_PATH)


dnl ===================================================================
dnl Checks for Java
dnl ===================================================================
if test "$ENABLE_JAVA" != ""; then

    # Windows-specific tests
    if test "$build_os" = "cygwin"; then
        if test -z "$with_jdk_home"; then
            dnl See <https://docs.oracle.com/javase/9/migrate/toc.htm#JSMIG-GUID-EEED398E-AE37-4D12-
            dnl AB10-49F82F720027> section "Windows Registry Key Changes":
            reg_get_value "$WIN_HOST_BITS" "HKEY_LOCAL_MACHINE/SOFTWARE/JavaSoft/JDK/CurrentVersion"
            if test -n "$regvalue"; then
                ver=$regvalue
                reg_get_value "$WIN_HOST_BITS" "HKEY_LOCAL_MACHINE/SOFTWARE/JavaSoft/JDK/$ver/JavaHome"
                with_jdk_home=$regvalue
            fi
            howfound="found automatically"
        else
            with_jdk_home=`win_short_path_for_make "$with_jdk_home"`
            howfound="you passed"
        fi

        if ! test -f "$with_jdk_home/lib/jvm.lib" -a -f "$with_jdk_home/bin/java.exe"; then
            AC_MSG_ERROR([No JDK found, pass the --with-jdk-home option (or fix the path) pointing to a $WIN_HOST_BITS-bit JDK >= 9])
        fi
    fi

    # macOS: /usr/libexec/java_home helps to set the current JDK_HOME. Actually JDK_HOME should NOT be set where java (/usr/bin/java) is located.
    # /usr/bin/java -> /System/Library/Frameworks/JavaVM.framework/Versions/Current/Commands/java, but /usr does not contain the JDK libraries
    if test -z "$with_jdk_home" -a "$_os" = "Darwin" -a -x /usr/libexec/java_home; then
        with_jdk_home=`/usr/libexec/java_home`
    fi

    JAVA_HOME=; export JAVA_HOME
    if test -z "$with_jdk_home"; then
        AC_PATH_PROG(JAVAINTERPRETER, $with_java)
    else
        _java_path="$with_jdk_home/bin/$with_java"
        dnl Check if there is a Java interpreter at all.
        if test -x "$_java_path"; then
            JAVAINTERPRETER=$_java_path
        else
            AC_MSG_ERROR([$_java_path not found, pass --with-jdk-home])
        fi
    fi

    dnl Check that the JDK found is correct architecture (at least 2 reasons to
    dnl check: officebean needs to link -ljawt, and libjpipe.so needs to be
    dnl loaded by java to run JunitTests:
    if test "$build_os" = "cygwin" -a "$cross_compiling" != "yes"; then
        shortjdkhome=`cygpath -d "$with_jdk_home"`
        if test $WIN_HOST_BITS -eq 64 -a -f "$with_jdk_home/bin/java.exe" -a "`$shortjdkhome/bin/java.exe -version 2>&1 | $GREP -i 64-bit`" = "" >/dev/null; then
            AC_MSG_WARN([You are building 64-bit binaries but the JDK $howfound is 32-bit])
            AC_MSG_ERROR([You should pass the --with-jdk-home option pointing to a 64-bit JDK])
        elif test $WIN_HOST_BITS -eq 32 -a -f "$with_jdk_home/bin/java.exe" -a "`$shortjdkhome/bin/java.exe -version 2>&1 | $GREP -i 64-bit`" != ""  >/dev/null; then
            AC_MSG_WARN([You are building 32-bit binaries but the JDK $howfound is 64-bit])
            AC_MSG_ERROR([You should pass the --with-jdk-home option pointing to a (32-bit) JDK])
        fi

        if test x`echo "$JAVAINTERPRETER" | $GREP -i '\.exe$'` = x; then
            JAVAINTERPRETER="${JAVAINTERPRETER}.exe"
        fi
        JAVAINTERPRETER=`win_short_path_for_make "$JAVAINTERPRETER"`
    elif test "$cross_compiling" != "yes"; then
        case $CPUNAME in
            AARCH64|AXP|X86_64|HPPA|IA64|POWERPC64|S390X|SPARC64|GODSON64)
                if test -f "$JAVAINTERPRETER" -a "`$JAVAINTERPRETER -version 2>&1 | $GREP -i 64-bit`" = "" >/dev/null; then
                    AC_MSG_WARN([You are building 64-bit binaries but the JDK $JAVAINTERPRETER is 32-bit])
                    AC_MSG_ERROR([You should pass the --with-jdk-home option pointing to a 64-bit JDK])
                fi
                ;;
            *) # assumption: everything else 32-bit
                if test -f "$JAVAINTERPRETER" -a "`$JAVAINTERPRETER -version 2>&1 | $GREP -i 64-bit`" != ""  >/dev/null; then
                    AC_MSG_WARN([You are building 32-bit binaries but the JDK $howfound is 64-bit])
                    AC_MSG_ERROR([You should pass the --with-jdk-home option pointing to a (32-bit) JDK])
                fi
                ;;
        esac
    fi
fi

dnl ===================================================================
dnl Checks for JDK.
dnl ===================================================================

# Whether all the complexity here actually is needed any more or not, no idea.

if test "$ENABLE_JAVA" != "" -a "$cross_compiling" != "yes"; then
    _gij_longver=0
    AC_MSG_CHECKING([the installed JDK])
    if test -n "$JAVAINTERPRETER"; then
        dnl java -version sends output to stderr!
        if test `$JAVAINTERPRETER -version 2>&1 | $GREP -c "Kaffe"` -gt 0; then
            AC_MSG_ERROR([No valid check available. Please check the block for your desired java in configure.ac])
        elif test `$JAVAINTERPRETER --version 2>&1 | $GREP -c "GNU libgcj"` -gt 0; then
            AC_MSG_ERROR([No valid check available. Please check the block for your desired java in configure.ac])
        elif test `$JAVAINTERPRETER -version 2>&1 | $AWK '{ print }' | $GREP -c "BEA"` -gt 0; then
            AC_MSG_ERROR([No valid check available. Please check the block for your desired java in configure.ac])
        elif test `$JAVAINTERPRETER -version 2>&1 | $AWK '{ print }' | $GREP -c "IBM"` -gt 0; then
            AC_MSG_ERROR([No valid check available. Please check the block for your desired java in configure.ac])
        else
            JDK=sun

            dnl Sun JDK specific tests
            _jdk=`$JAVAINTERPRETER -version 2>&1 | $AWK -F'"' '{ print \$2 }' | $SED '/^$/d' | $SED s/[[-A-Za-z]]*//`
            _jdk_ver=`echo "$_jdk" | $AWK -F. '{ print (($1 * 100) + $2) * 100 + $3;}'`

            if test "$_jdk_ver" -lt 10900; then
                AC_MSG_ERROR([JDK is too old, you need at least 9 ($_jdk_ver < 10900)])
            fi
            if test "$_jdk_ver" -gt 10900; then
                JAVA_CLASSPATH_NOT_SET=TRUE
            fi

            JAVA_HOME=`echo $JAVAINTERPRETER | $SED -n "s,//*bin//*java,,p"`
            if test "$_os" = "WINNT"; then
                JAVA_HOME=`echo $JAVA_HOME | $SED "s,\.[[eE]][[xX]][[eE]]$,,"`
            fi
            AC_MSG_RESULT([found $JAVA_HOME (JDK $_jdk)])

            # set to limit VM usage for JunitTests
            JAVAIFLAGS=-Xmx64M
            # set to limit VM usage for javac
            JAVACFLAGS=-J-Xmx128M
        fi
    else
        AC_MSG_ERROR([Java not found. You need at least JDK 9])
    fi
else
    if test -z "$ENABLE_JAVA"; then
        dnl Java disabled
        JAVA_HOME=
        export JAVA_HOME
    elif test "$cross_compiling" = "yes"; then
        # Just assume compatibility of build and host JDK
        JDK=$JDK_FOR_BUILD
        JAVAIFLAGS=$JAVAIFLAGS_FOR_BUILD
    fi
fi

dnl ===================================================================
dnl Checks for javac
dnl ===================================================================
if test "$ENABLE_JAVA" != "" -a "$cross_compiling" != "yes"; then
    javacompiler="javac"
    : ${JAVA_SOURCE_VER=8}
    : ${JAVA_TARGET_VER=8}
    if test -z "$with_jdk_home"; then
        AC_PATH_PROG(JAVACOMPILER, $javacompiler)
    else
        _javac_path="$with_jdk_home/bin/$javacompiler"
        dnl Check if there is a Java compiler at all.
        if test -x "$_javac_path"; then
            JAVACOMPILER=$_javac_path
        fi
    fi
    if test -z "$JAVACOMPILER"; then
        AC_MSG_ERROR([$javacompiler not found set with_jdk_home])
    fi
    if test "$build_os" = "cygwin"; then
        if test x`echo "$JAVACOMPILER" | $GREP -i '\.exe$'` = x; then
            JAVACOMPILER="${JAVACOMPILER}.exe"
        fi
        JAVACOMPILER=`win_short_path_for_make "$JAVACOMPILER"`
    fi
fi

dnl ===================================================================
dnl Checks for javadoc
dnl ===================================================================
if test "$ENABLE_JAVA" != "" -a "$cross_compiling" != "yes"; then
    if test -z "$with_jdk_home"; then
        AC_PATH_PROG(JAVADOC, javadoc)
    else
        _javadoc_path="$with_jdk_home/bin/javadoc"
        dnl Check if there is a javadoc at all.
        if test -x "$_javadoc_path"; then
            JAVADOC=$_javadoc_path
        else
            AC_PATH_PROG(JAVADOC, javadoc)
        fi
    fi
    if test -z "$JAVADOC"; then
        AC_MSG_ERROR([$_javadoc_path not found set with_jdk_home])
    fi
    if test "$build_os" = "cygwin"; then
        if test x`echo "$JAVADOC" | $GREP -i '\.exe$'` = x; then
            JAVADOC="${JAVADOC}.exe"
        fi
        JAVADOC=`win_short_path_for_make "$JAVADOC"`
    fi

    if test `$JAVADOC --version 2>&1 | $GREP -c "gjdoc"` -gt 0; then
    JAVADOCISGJDOC="yes"
    fi
fi
AC_SUBST(JAVADOC)
AC_SUBST(JAVADOCISGJDOC)

if test "$ENABLE_JAVA" != "" -a \( "$cross_compiling" != "yes" -o -n "$with_jdk_home" \); then
    # check if JAVA_HOME was (maybe incorrectly?) set automatically to /usr
    if test "$JAVA_HOME" = "/usr" -a "x$with_jdk_home" = "x"; then
        if basename $(readlink $(readlink $JAVACOMPILER)) >/dev/null 2>/dev/null; then
           # try to recover first by looking whether we have an alternative
           # system as in Debian or newer SuSEs where following /usr/bin/javac
           # over /etc/alternatives/javac leads to the right bindir where we
           # just need to strip a bit away to get a valid JAVA_HOME
           JAVA_HOME=$(readlink $(readlink $JAVACOMPILER))
        elif readlink $JAVACOMPILER >/dev/null 2>/dev/null; then
            # maybe only one level of symlink (e.g. on Mac)
            JAVA_HOME=$(readlink $JAVACOMPILER)
            if test "$(dirname $JAVA_HOME)" = "."; then
                # we've got no path to trim back
                JAVA_HOME=""
            fi
        else
            # else warn
            AC_MSG_WARN([JAVA_HOME is set to /usr - this is very likely to be incorrect])
            AC_MSG_WARN([if this is the case, please inform the correct JAVA_HOME with --with-jdk-home])
            add_warning "JAVA_HOME is set to /usr - this is very likely to be incorrect"
            add_warning "if this is the case, please inform the correct JAVA_HOME with --with-jdk-home"
        fi
        dnl now that we probably have the path to the real javac, make a JAVA_HOME out of it...
        if test "$JAVA_HOME" != "/usr"; then
            if test "$_os" = "Darwin" -o "$OS_FOR_BUILD" = MACOSX; then
                dnl Leopard returns a non-suitable path with readlink - points to "Current" only
                JAVA_HOME=$(echo $JAVA_HOME | $SED -e s,/Current/Commands/javac$,/CurrentJDK/Home,)
                dnl Tiger already returns a JDK path...
                JAVA_HOME=$(echo $JAVA_HOME | $SED -e s,/CurrentJDK/Commands/javac$,/CurrentJDK/Home,)
            else
                JAVA_HOME=$(echo $JAVA_HOME | $SED -e s,/bin/javac$,,)
                dnl check that we have a directory as certain distros eg gentoo substitute javac for a script
                dnl that checks which version to run
                if test -f "$JAVA_HOME"; then
                    JAVA_HOME=""; # set JAVA_HOME to null if it's a file
                fi
            fi
        fi
    fi
    # as we drop out of this, JAVA_HOME may have been set to the empty string by readlink

    dnl now if JAVA_HOME has been set to empty, then call findhome to find it
    if test -z "$JAVA_HOME"; then
        if test "x$with_jdk_home" = "x"; then
            cat > findhome.java <<_ACEOF
[import java.io.File;

class findhome
{
    public static void main(String args[])
    {
        String jrelocation = System.getProperty("java.home");
        File jre = new File(jrelocation);
        System.out.println(jre.getParent());
    }
}]
_ACEOF
            AC_MSG_CHECKING([if javac works])
            javac_cmd="$JAVACOMPILER findhome.java 1>&2"
            AC_TRY_EVAL(javac_cmd)
            if test $? = 0 -a -f ./findhome.class; then
                AC_MSG_RESULT([javac works])
            else
                echo "configure: javac test failed" >&5
                cat findhome.java >&5
                AC_MSG_ERROR([javac does not work - java projects will not build!])
            fi
            AC_MSG_CHECKING([if gij knows its java.home])
            JAVA_HOME=`$JAVAINTERPRETER findhome`
            if test $? = 0 -a "$JAVA_HOME" != ""; then
                AC_MSG_RESULT([$JAVA_HOME])
            else
                echo "configure: java test failed" >&5
                cat findhome.java >&5
                AC_MSG_ERROR([gij does not know its java.home - use --with-jdk-home])
            fi
            # clean-up after ourselves
            rm -f ./findhome.java ./findhome.class
        else
            JAVA_HOME=`echo $JAVAINTERPRETER | $SED -n "s,//*bin//*$with_java,,p"`
        fi
    fi

    # now check if $JAVA_HOME is really valid
    if test "$_os" = "Darwin" -o "$OS_FOR_BUILD" = MACOSX; then
        if test ! -f "$JAVA_HOME/lib/jvm.cfg" -a "x$with_jdk_home" = "x"; then
            AC_MSG_WARN([JAVA_HOME was not explicitly informed with --with-jdk-home. the configure script])
            AC_MSG_WARN([attempted to find JAVA_HOME automatically, but apparently it failed])
            AC_MSG_WARN([in case JAVA_HOME is incorrectly set, some projects will not be built correctly])
            add_warning "JAVA_HOME was not explicitly informed with --with-jdk-home. the configure script"
            add_warning "attempted to find JAVA_HOME automatically, but apparently it failed"
            add_warning "in case JAVA_HOME is incorrectly set, some projects will not be built correctly"
        fi
    fi
    PathFormat "$JAVA_HOME"
    JAVA_HOME="$formatted_path"
fi

if test -z "$JAWTLIB" -a -n "$ENABLE_JAVA" -a "$_os" != Android -a \
    "$_os" != Darwin
then
    AC_MSG_CHECKING([for JAWT lib])
    if test "$_os" = WINNT; then
        # The path to $JAVA_HOME/lib/$JAWTLIB is part of $ILIB:
        JAWTLIB=jawt.lib
    else
        case "$host_cpu" in
        arm*)
            AS_IF([test -e "$JAVA_HOME/jre/lib/aarch32/libjawt.so"], [my_java_arch=aarch32], [my_java_arch=arm])
            JAVA_ARCH=$my_java_arch
            ;;
        i*86)
            my_java_arch=i386
            ;;
        m68k)
            my_java_arch=m68k
            ;;
        powerpc)
            my_java_arch=ppc
            ;;
        powerpc64)
            my_java_arch=ppc64
            ;;
        powerpc64le)
            AS_IF([test -e "$JAVA_HOME/jre/lib/ppc64le/libjawt.so"], [my_java_arch=ppc64le], [my_java_arch=ppc64])
            JAVA_ARCH=$my_java_arch
            ;;
        sparc64)
            my_java_arch=sparcv9
            ;;
        x86_64)
            my_java_arch=amd64
            ;;
        *)
            my_java_arch=$host_cpu
            ;;
        esac
        # This is where JDK9 puts the library
        if test -e "$JAVA_HOME/lib/libjawt.so"; then
            JAWTLIB="-L$JAVA_HOME/lib/ -ljawt"
        else
            JAWTLIB="-L$JAVA_HOME/jre/lib/$my_java_arch -ljawt"
        fi
        AS_IF([test "$JAVA_ARCH" != ""], [AC_DEFINE_UNQUOTED([JAVA_ARCH], ["$JAVA_ARCH"])])
    fi
    AC_MSG_RESULT([$JAWTLIB])
fi
AC_SUBST(JAWTLIB)

if test -n "$ENABLE_JAVA" -a -z "$JAVAINC"; then
    case "$host_os" in

    aix*)
        JAVAINC="-I$JAVA_HOME/include"
        JAVAINC="$JAVAINC -I$JAVA_HOME/include/aix"
        test -d "$JAVA_HOME/include/native_thread" && JAVAINC="$JAVAINC -I$JAVA_HOME/include/native_thread"
        ;;

    cygwin*|wsl*)
        JAVAINC="-I$JAVA_HOME/include/win32"
        JAVAINC="$JAVAINC -I$JAVA_HOME/include"
        ;;

    darwin*|macos*)
        if test -d "$JAVA_HOME/include/darwin"; then
            JAVAINC="-I$JAVA_HOME/include  -I$JAVA_HOME/include/darwin"
        else
            JAVAINC=${ISYSTEM}$FRAMEWORKSHOME/JavaVM.framework/Versions/Current/Headers
        fi
        ;;

    dragonfly*)
        JAVAINC="-I$JAVA_HOME/include"
        test -d "$JAVA_HOME/include/native_thread" && JAVAINC="$JAVAINC -I$JAVA_HOME/include/native_thread"
        ;;

    freebsd*)
        JAVAINC="-I$JAVA_HOME/include"
        JAVAINC="$JAVAINC -I$JAVA_HOME/include/freebsd"
        JAVAINC="$JAVAINC -I$JAVA_HOME/include/bsd"
        JAVAINC="$JAVAINC -I$JAVA_HOME/include/linux"
        test -d "$JAVA_HOME/include/native_thread" && JAVAINC="$JAVAINC -I$JAVA_HOME/include/native_thread"
        ;;

    k*bsd*-gnu*)
        JAVAINC="-I$JAVA_HOME/include"
        JAVAINC="$JAVAINC -I$JAVA_HOME/include/linux"
        test -d "$JAVA_HOME/include/native_thread" && JAVAINC="$JAVAINC -I$JAVA_HOME/include/native_thread"
        ;;

    linux-gnu*)
        JAVAINC="-I$JAVA_HOME/include"
        JAVAINC="$JAVAINC -I$JAVA_HOME/include/linux"
        test -d "$JAVA_HOME/include/native_thread" && JAVAINC="$JAVAINC -I$JAVA_HOME/include/native_thread"
        ;;

    *netbsd*)
        JAVAINC="-I$JAVA_HOME/include"
        JAVAINC="$JAVAINC -I$JAVA_HOME/include/netbsd"
        test -d "$JAVA_HOME/include/native_thread" && JAVAINC="$JAVAINC -I$JAVA_HOME/include/native_thread"
       ;;

    openbsd*)
        JAVAINC="-I$JAVA_HOME/include"
        JAVAINC="$JAVAINC -I$JAVA_HOME/include/openbsd"
        test -d "$JAVA_HOME/include/native_thread" && JAVAINC="$JAVAINC -I$JAVA_HOME/include/native_thread"
        ;;

    solaris*)
        JAVAINC="-I$JAVA_HOME/include"
        JAVAINC="$JAVAINC -I$JAVA_HOME/include/solaris"
        test -d "$JAVA_HOME/include/native_thread" && JAVAINC="$JAVAINC -I$JAVA_HOME/include/native_thread"
        ;;
    esac
fi
SOLARINC="$SOLARINC $JAVAINC"

if test "$ENABLE_JAVA" != "" -a "$cross_compiling" != "yes"; then
    JAVA_HOME_FOR_BUILD=$JAVA_HOME
    JAVAIFLAGS_FOR_BUILD=$JAVAIFLAGS
    JDK_FOR_BUILD=$JDK
fi

AC_SUBST(JAVACFLAGS)
AC_SUBST(JAVACOMPILER)
AC_SUBST(JAVAINTERPRETER)
AC_SUBST(JAVAIFLAGS)
AC_SUBST(JAVAIFLAGS_FOR_BUILD)
AC_SUBST(JAVA_CLASSPATH_NOT_SET)
AC_SUBST(JAVA_HOME)
AC_SUBST(JAVA_HOME_FOR_BUILD)
AC_SUBST(JDK)
AC_SUBST(JDK_FOR_BUILD)
AC_SUBST(JAVA_SOURCE_VER)
AC_SUBST(JAVA_TARGET_VER)


dnl ===================================================================
dnl Export file validation
dnl ===================================================================
AC_MSG_CHECKING([whether to enable export file validation])
if test "$with_export_validation" != "no"; then
    if test -z "$ENABLE_JAVA"; then
        if test "$with_export_validation" = "yes"; then
            AC_MSG_ERROR([requested, but Java is disabled])
        else
            AC_MSG_RESULT([no, as Java is disabled])
        fi
    elif ! test -d "${SRC_ROOT}/schema"; then
        if test "$with_export_validation" = "yes"; then
            AC_MSG_ERROR([requested, but schema directory is missing (it is excluded from tarballs)])
        else
            AC_MSG_RESULT([no, schema directory is missing (it is excluded from tarballs)])
        fi
    else
        AC_MSG_RESULT([yes])
        AC_DEFINE(HAVE_EXPORT_VALIDATION)

        AC_PATH_PROGS(ODFVALIDATOR, odfvalidator)
        if test -z "$ODFVALIDATOR"; then
            # remember to download the ODF toolkit with validator later
            AC_MSG_NOTICE([no odfvalidator found, will download it])
            BUILD_TYPE="$BUILD_TYPE ODFVALIDATOR"
            ODFVALIDATOR="$BUILDDIR/bin/odfvalidator.sh"

            # and fetch name of odfvalidator jar name from download.lst
            ODFVALIDATOR_JAR=`$SED -n -e "s/export *ODFVALIDATOR_JAR *:= *\(.*\) */\1/p" $SRC_ROOT/download.lst`
            AC_SUBST(ODFVALIDATOR_JAR)

            if test -z "$ODFVALIDATOR_JAR"; then
                AC_MSG_ERROR([cannot determine odfvalidator jar location (--with-export-validation)])
            fi
        fi
        if test "$build_os" = "cygwin"; then
            # In case of Cygwin it will be executed from Windows,
            # so we need to run bash and absolute path to validator
            # so instead of "odfvalidator" it will be
            # something like "bash.exe C:\cygwin\opt\lo\bin\odfvalidator"
            ODFVALIDATOR="bash.exe `cygpath -m "$ODFVALIDATOR"`"
        else
            ODFVALIDATOR="sh $ODFVALIDATOR"
        fi
        AC_SUBST(ODFVALIDATOR)


        AC_PATH_PROGS(OFFICEOTRON, officeotron)
        if test -z "$OFFICEOTRON"; then
            # remember to download the officeotron with validator later
            AC_MSG_NOTICE([no officeotron found, will download it])
            BUILD_TYPE="$BUILD_TYPE OFFICEOTRON"
            OFFICEOTRON="$BUILDDIR/bin/officeotron.sh"

            # and fetch name of officeotron jar name from download.lst
            OFFICEOTRON_JAR=`$SED -n -e "s/export *OFFICEOTRON_JAR *:= *\(.*\) */\1/p" $SRC_ROOT/download.lst`
            AC_SUBST(OFFICEOTRON_JAR)

            if test -z "$OFFICEOTRON_JAR"; then
                AC_MSG_ERROR([cannot determine officeotron jar location (--with-export-validation)])
            fi
        else
            # check version of existing officeotron
            OFFICEOTRON_VER=`$OFFICEOTRON --version | $AWK -F. '{ print \$1*10000+\$2*100+\$3 }'`
            if test 0"$OFFICEOTRON_VER" -lt 704; then
                AC_MSG_ERROR([officeotron too old])
            fi
        fi
        if test "$build_os" = "cygwin"; then
            # In case of Cygwin it will be executed from Windows,
            # so we need to run bash and absolute path to validator
            # so instead of "odfvalidator" it will be
            # something like "bash.exe C:\cygwin\opt\lo\bin\odfvalidator"
            OFFICEOTRON="bash.exe `cygpath -m "$OFFICEOTRON"`"
        else
            OFFICEOTRON="sh $OFFICEOTRON"
        fi
    fi
    AC_SUBST(OFFICEOTRON)
else
    AC_MSG_RESULT([no])
fi

AC_MSG_CHECKING([for Microsoft Binary File Format Validator])
if test "$with_bffvalidator" != "no"; then
    AC_DEFINE(HAVE_BFFVALIDATOR)

    if test "$with_export_validation" = "no"; then
        AC_MSG_ERROR([Please enable export validation (-with-export-validation)!])
    fi

    if test "$with_bffvalidator" = "yes"; then
        BFFVALIDATOR=`win_short_path_for_make "$PROGRAMFILES/Microsoft Office/BFFValidator/BFFValidator.exe"`
    else
        BFFVALIDATOR="$with_bffvalidator"
    fi

    if test "$build_os" = "cygwin"; then
        if test -n "$BFFVALIDATOR" -a -e "`cygpath $BFFVALIDATOR`"; then
            AC_MSG_RESULT($BFFVALIDATOR)
        else
            AC_MSG_ERROR([bffvalidator not found, but required by --with-bffvalidator])
        fi
    elif test -n "$BFFVALIDATOR"; then
        # We are not in Cygwin but need to run Windows binary with wine
        AC_PATH_PROGS(WINE, wine)

        # so swap in a shell wrapper that converts paths transparently
        BFFVALIDATOR_EXE="$BFFVALIDATOR"
        BFFVALIDATOR="sh $BUILDDIR/bin/bffvalidator.sh"
        AC_SUBST(BFFVALIDATOR_EXE)
        AC_MSG_RESULT($BFFVALIDATOR)
    else
        AC_MSG_ERROR([bffvalidator not found, but required by --with-bffvalidator])
    fi
    AC_SUBST(BFFVALIDATOR)
else
    AC_MSG_RESULT([no])
fi

dnl ===================================================================
dnl Check for C preprocessor to use
dnl ===================================================================
AC_MSG_CHECKING([which C preprocessor to use in idlc])
SYSTEM_UCPP_IS_GCC=
if test -n "$with_idlc_cpp"; then
    AC_MSG_RESULT([$with_idlc_cpp])
    AC_PATH_PROG(SYSTEM_UCPP, $with_idlc_cpp)
    AC_MSG_CHECKING([if $with_idlc_cpp is GCC CPP])
    # ucpp will accept -v (to output version), warn about the others as unknown
    # and return 1 (due to -v)
    # gcc will accept -v (as verbose), --version (to output version) and -nostdinc
    # and return 0 (due to --version ) if all options are supported
    $SYSTEM_UCPP -v --version -nostdinc >/dev/null 2>/dev/null
    if test $? -eq 0;  then
        SYSTEM_UCPP_IS_GCC=TRUE
        AC_MSG_RESULT([yes])
    else
        AC_MSG_RESULT([no])
    fi
else
    AC_MSG_RESULT([ucpp])
    AC_MSG_CHECKING([which ucpp to use])
    if test -n "$with_system_ucpp" -a "$with_system_ucpp" != "no"; then
        AC_MSG_RESULT([external])
        AC_PATH_PROG(SYSTEM_UCPP, ucpp)
    else
        AC_MSG_RESULT([internal])
        BUILD_TYPE="$BUILD_TYPE UCPP"
    fi
fi
AC_SUBST(SYSTEM_UCPP)
AC_SUBST(SYSTEM_UCPP_IS_GCC)

dnl ===================================================================
dnl Check for epm (not needed for Windows)
dnl ===================================================================
AC_MSG_CHECKING([whether to enable EPM for packing])
if test "$enable_epm" = "yes"; then
    AC_MSG_RESULT([yes])
    if test "$_os" != "WINNT"; then
        if test $_os = Darwin; then
            EPM=internal
        elif test -n "$with_epm"; then
            EPM=$with_epm
        else
            AC_PATH_PROG(EPM, epm, no)
        fi
        if test "$EPM" = "no" -o "$EPM" = "internal"; then
            AC_MSG_NOTICE([EPM will be built.])
            BUILD_TYPE="$BUILD_TYPE EPM"
            EPM=${WORKDIR}/UnpackedTarball/epm/epm
        else
            # Gentoo has some epm which is something different...
            AC_MSG_CHECKING([whether the found epm is the right epm])
            if $EPM | grep "ESP Package Manager" >/dev/null 2>/dev/null; then
                AC_MSG_RESULT([yes])
            else
                AC_MSG_ERROR([no. Install ESP Package Manager (http://www.msweet.org/projects.php?Z2) and/or specify the path to the right epm])
            fi
            AC_MSG_CHECKING([epm version])
            EPM_VERSION=`$EPM | grep 'ESP Package Manager' | cut -d' ' -f4 | $SED -e s/v//`
            if test "`echo $EPM_VERSION | cut -d'.' -f1`" -gt "3" || \
               test "`echo $EPM_VERSION | cut -d'.' -f1`" -eq "3" -a "`echo $EPM_VERSION | cut -d'.' -f2`" -ge "7"; then
                AC_MSG_RESULT([OK, >= 3.7])
            else
                AC_MSG_RESULT([too old. epm >= 3.7 is required.])
                AC_MSG_ERROR([Install ESP Package Manager (http://www.msweet.org/projects.php?Z2) and/or specify the path to the right epm])
            fi
        fi
    fi

    if echo "$PKGFORMAT" | $EGREP rpm 2>&1 >/dev/null; then
        AC_MSG_CHECKING([for rpm])
        for a in "$RPM" rpmbuild rpm; do
            $a --usage >/dev/null 2> /dev/null
            if test $? -eq 0; then
                RPM=$a
                break
            else
                $a --version >/dev/null 2> /dev/null
                if test $? -eq 0; then
                    RPM=$a
                    break
                fi
            fi
        done
        if test -z "$RPM"; then
            AC_MSG_ERROR([not found])
        elif "$RPM" --help 2>&1 | $EGREP buildroot >/dev/null; then
            RPM_PATH=`which $RPM`
            AC_MSG_RESULT([$RPM_PATH])
            SCPDEFS="$SCPDEFS -DWITH_RPM"
        else
            AC_MSG_ERROR([cannot build packages. Try installing rpmbuild.])
        fi
    fi
    if echo "$PKGFORMAT" | $EGREP deb 2>&1 >/dev/null; then
        AC_PATH_PROG(DPKG, dpkg, no)
        if test "$DPKG" = "no"; then
            AC_MSG_ERROR([dpkg needed for deb creation. Install dpkg.])
        fi
    fi
    if echo "$PKGFORMAT" | $EGREP rpm 2>&1 >/dev/null || \
       echo "$PKGFORMAT" | $EGREP pkg 2>&1 >/dev/null; then
        if test "$with_epm" = "no" -a "$_os" != "Darwin"; then
            if test "`echo $EPM_VERSION | cut -d'.' -f1`" -lt "4"; then
                AC_MSG_CHECKING([whether epm is patched for LibreOffice's needs])
                if grep "Patched for .*Office" $EPM >/dev/null 2>/dev/null; then
                    AC_MSG_RESULT([yes])
                else
                    AC_MSG_RESULT([no])
                    if echo "$PKGFORMAT" | $GREP -q rpm; then
                        _pt="rpm"
                        AC_MSG_WARN([the rpms will need to be installed with --nodeps])
                        add_warning "the rpms will need to be installed with --nodeps"
                    else
                        _pt="pkg"
                    fi
                    AC_MSG_WARN([the ${_pt}s will not be relocatable])
                    add_warning "the ${_pt}s will not be relocatable"
                    AC_MSG_WARN([if you want to make sure installation without --nodeps and
                                 relocation will work, you need to patch your epm with the
                                 patch in epm/epm-3.7.patch or build with
                                 --with-epm=internal which will build a suitable epm])
                fi
            fi
        fi
    fi
    if echo "$PKGFORMAT" | $EGREP pkg 2>&1 >/dev/null; then
        AC_PATH_PROG(PKGMK, pkgmk, no)
        if test "$PKGMK" = "no"; then
            AC_MSG_ERROR([pkgmk needed for Solaris pkg creation. Install it.])
        fi
    fi
    AC_SUBST(RPM)
    AC_SUBST(DPKG)
    AC_SUBST(PKGMK)
else
    for i in $PKGFORMAT; do
        case "$i" in
        aix | bsd | deb | pkg | rpm | native | portable)
            AC_MSG_ERROR(
                [--with-package-format='$PKGFORMAT' requires --enable-epm])
            ;;
        esac
    done
    AC_MSG_RESULT([no])
    EPM=NO
fi
AC_SUBST(EPM)

ENABLE_LWP=
if test "$enable_lotuswordpro" = "yes"; then
    ENABLE_LWP="TRUE"
fi
AC_SUBST(ENABLE_LWP)

dnl ===================================================================
dnl Check for building ODK
dnl ===================================================================
if test "$enable_odk" != yes; then
    unset DOXYGEN
else
    if test "$with_doxygen" = no; then
        AC_MSG_CHECKING([for doxygen])
        unset DOXYGEN
        AC_MSG_RESULT([no])
    else
        if test "$with_doxygen" = yes; then
            AC_PATH_PROG([DOXYGEN], [doxygen])
            if test -z "$DOXYGEN"; then
                AC_MSG_ERROR([doxygen not found in \$PATH; specify its pathname via --with-doxygen=..., or disable its use via --without-doxygen])
            fi
            if $DOXYGEN -g - | grep -q "HAVE_DOT *= *YES"; then
                if ! dot -V 2>/dev/null; then
                    AC_MSG_ERROR([dot not found in \$PATH but doxygen defaults to HAVE_DOT=YES; install graphviz or disable its use via --without-doxygen])
                fi
            fi
        else
            AC_MSG_CHECKING([for doxygen])
            DOXYGEN=$with_doxygen
            AC_MSG_RESULT([$DOXYGEN])
        fi
        if test -n "$DOXYGEN"; then
            DOXYGEN_VERSION=`$DOXYGEN --version 2>/dev/null`
            DOXYGEN_NUMVERSION=`echo $DOXYGEN_VERSION | $AWK -F. '{ print \$1*10000 + \$2*100 + \$3 }'`
            if ! test "$DOXYGEN_NUMVERSION" -ge "10804" ; then
                AC_MSG_ERROR([found doxygen is too old; need at least version 1.8.4 or specify --without-doxygen])
            fi
        fi
    fi
fi
AC_SUBST([DOXYGEN])

AC_MSG_CHECKING([whether to build the ODK])
if test "$enable_odk" = yes; then
    AC_MSG_RESULT([yes])
    BUILD_TYPE="$BUILD_TYPE ODK"
else
    AC_MSG_RESULT([no])
fi

dnl ==================================================================
dnl libfuzzer
dnl ==================================================================
AC_MSG_CHECKING([whether to enable fuzzers])
if test "$enable_fuzzers" != yes; then
    AC_MSG_RESULT([no])
else
    if test -z $LIB_FUZZING_ENGINE; then
      AC_MSG_ERROR(['LIB_FUZZING_ENGINE' must be set when using --enable-fuzzers. Examples include '-fsanitize=fuzzer'.])
    fi
    AC_MSG_RESULT([yes])
    ENABLE_FUZZERS="TRUE"
    AC_DEFINE([ENABLE_FUZZERS],1)
    BUILD_TYPE="$BUILD_TYPE FUZZERS"
fi
AC_SUBST(LIB_FUZZING_ENGINE)

dnl ===================================================================
dnl Check for system zlib
dnl ===================================================================
if test "$with_system_zlib" = "auto"; then
    case "$_os" in
    WINNT)
        with_system_zlib="$with_system_libs"
        ;;
    *)
        if test "$enable_fuzzers" != "yes"; then
            with_system_zlib=yes
        else
            with_system_zlib=no
        fi
        ;;
    esac
fi

dnl we want to use libo_CHECK_SYSTEM_MODULE here too, but macOS is too stupid
dnl and has no pkg-config for it at least on some tinderboxes,
dnl so leaving that out for now
dnl libo_CHECK_SYSTEM_MODULE([zlib],[ZLIB],[zlib])
AC_MSG_CHECKING([which zlib to use])
if test "$with_system_zlib" = "yes"; then
    AC_MSG_RESULT([external])
    SYSTEM_ZLIB=TRUE
    AC_CHECK_HEADER(zlib.h, [],
        [AC_MSG_ERROR(zlib.h not found. install zlib)], [])
    AC_CHECK_LIB(z, deflate, [ ZLIB_LIBS=-lz ],
        [AC_MSG_ERROR(zlib not found or functional)], [])
else
    AC_MSG_RESULT([internal])
    SYSTEM_ZLIB=
    BUILD_TYPE="$BUILD_TYPE ZLIB"
    ZLIB_CFLAGS="-I${WORKDIR}/UnpackedTarball/zlib"
    ZLIB_LIBS="-L${WORKDIR}/LinkTarget/StaticLibrary -lzlib"
fi
AC_SUBST(ZLIB_CFLAGS)
AC_SUBST(ZLIB_LIBS)
AC_SUBST(SYSTEM_ZLIB)

dnl ===================================================================
dnl Check for system jpeg
dnl ===================================================================
AC_MSG_CHECKING([which libjpeg to use])
if test "$with_system_jpeg" = "yes"; then
    AC_MSG_RESULT([external])
    SYSTEM_LIBJPEG=TRUE
    AC_CHECK_HEADER(jpeglib.h, [ LIBJPEG_CFLAGS= ],
        [AC_MSG_ERROR(jpeg.h not found. install libjpeg)], [])
    AC_CHECK_LIB(jpeg, jpeg_resync_to_restart, [ LIBJPEG_LIBS="-ljpeg" ],
        [AC_MSG_ERROR(jpeg library not found or functional)], [])
else
    SYSTEM_LIBJPEG=
    AC_MSG_RESULT([internal, libjpeg-turbo])
    BUILD_TYPE="$BUILD_TYPE LIBJPEG_TURBO"

    case "$host_cpu" in
    x86_64 | amd64 | i*86 | x86 | ia32)
        AC_CHECK_PROGS(NASM, [nasm nasmw yasm])
        if test -z "$NASM" -a "$build_os" = "cygwin"; then
            if test -n "$LODE_HOME" -a -x "$LODE_HOME/opt/bin/nasm"; then
                NASM="$LODE_HOME/opt/bin/nasm"
            elif test -x "/opt/lo/bin/nasm"; then
                NASM="/opt/lo/bin/nasm"
            fi
        fi

        if test -n "$NASM"; then
            AC_MSG_CHECKING([for object file format of host system])
            case "$host_os" in
              cygwin* | mingw* | pw32* | wsl*)
                case "$host_cpu" in
                  x86_64)
                    objfmt='Win64-COFF'
                    ;;
                  *)
                    objfmt='Win32-COFF'
                    ;;
                esac
              ;;
              msdosdjgpp* | go32*)
                objfmt='COFF'
              ;;
              os2-emx*) # not tested
                objfmt='MSOMF' # obj
              ;;
              linux*coff* | linux*oldld*)
                objfmt='COFF' # ???
              ;;
              linux*aout*)
                objfmt='a.out'
              ;;
              linux*)
                case "$host_cpu" in
                  x86_64)
                    objfmt='ELF64'
                    ;;
                  *)
                    objfmt='ELF'
                    ;;
                esac
              ;;
              kfreebsd* | freebsd* | netbsd* | openbsd*)
                if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
                  objfmt='BSD-a.out'
                else
                  case "$host_cpu" in
                    x86_64 | amd64)
                      objfmt='ELF64'
                      ;;
                    *)
                      objfmt='ELF'
                      ;;
                  esac
                fi
              ;;
              solaris* | sunos* | sysv* | sco*)
                case "$host_cpu" in
                  x86_64)
                    objfmt='ELF64'
                    ;;
                  *)
                    objfmt='ELF'
                    ;;
                esac
              ;;
              darwin* | rhapsody* | nextstep* | openstep* | macos*)
                case "$host_cpu" in
                  x86_64)
                    objfmt='Mach-O64'
                    ;;
                  *)
                    objfmt='Mach-O'
                    ;;
                esac
              ;;
              *)
                objfmt='ELF ?'
              ;;
            esac

            AC_MSG_RESULT([$objfmt])
            if test "$objfmt" = 'ELF ?'; then
              objfmt='ELF'
              AC_MSG_WARN([unexpected host system. assumed that the format is $objfmt.])
            fi

            AC_MSG_CHECKING([for object file format specifier (NAFLAGS) ])
            case "$objfmt" in
              MSOMF)      NAFLAGS='-fobj -DOBJ32 -DPIC';;
              Win32-COFF) NAFLAGS='-fwin32 -DWIN32 -DPIC';;
              Win64-COFF) NAFLAGS='-fwin64 -DWIN64 -D__x86_64__ -DPIC';;
              COFF)       NAFLAGS='-fcoff -DCOFF -DPIC';;
              a.out)      NAFLAGS='-faout -DAOUT -DPIC';;
              BSD-a.out)  NAFLAGS='-faoutb -DAOUT -DPIC';;
              ELF)        NAFLAGS='-felf -DELF -DPIC';;
              ELF64)      NAFLAGS='-felf64 -DELF -D__x86_64__ -DPIC';;
              RDF)        NAFLAGS='-frdf -DRDF -DPIC';;
              Mach-O)     NAFLAGS='-fmacho -DMACHO -DPIC';;
              Mach-O64)   NAFLAGS='-fmacho64 -DMACHO -D__x86_64__ -DPIC';;
            esac
            AC_MSG_RESULT([$NAFLAGS])

            AC_MSG_CHECKING([whether the assembler ($NASM $NAFLAGS) works])
            cat > conftest.asm << EOF
            [%line __oline__ "configure"
                    section .text
                    global  _main,main
            _main:
            main:   xor     eax,eax
                    ret
            ]
EOF
            try_nasm='$NASM $NAFLAGS -o conftest.o conftest.asm'
            if AC_TRY_EVAL(try_nasm) && test -s conftest.o; then
              AC_MSG_RESULT(yes)
            else
              echo "configure: failed program was:" >&AS_MESSAGE_LOG_FD
              cat conftest.asm >&AS_MESSAGE_LOG_FD
              rm -rf conftest*
              AC_MSG_RESULT(no)
              AC_MSG_WARN([installation or configuration problem: assembler cannot create object files.])
              NASM=""
            fi

        fi

        if test -z "$NASM"; then
cat << _EOS
****************************************************************************
You need yasm or nasm (Netwide Assembler) to build the internal jpeg library optimally.
To get one please:

_EOS
            if test "$build_os" = "cygwin"; then
cat << _EOS
install a pre-compiled binary for Win32

mkdir -p /opt/lo/bin
cd /opt/lo/bin
wget https://dev-www.libreoffice.org/bin/cygwin/nasm.exe
chmod +x nasm

or get and install one from http://www.nasm.us/

Then re-run autogen.sh

Note: autogen.sh will try to use /opt/lo/bin/nasm if the environment variable NASM is not already defined.
Alternatively, you can install the 'new' nasm where ever you want and make sure that \`which nasm\` finds it.

_EOS
            else
cat << _EOS
consult https://github.com/libjpeg-turbo/libjpeg-turbo/blob/master/BUILDING.md

_EOS
            fi
            AC_MSG_WARN([no suitable nasm (Netwide Assembler) found])
            add_warning "no suitable nasm (Netwide Assembler) found for internal libjpeg-turbo"
        fi
      ;;
    esac
fi

AC_SUBST(NASM)
AC_SUBST(NAFLAGS)
AC_SUBST(LIBJPEG_CFLAGS)
AC_SUBST(LIBJPEG_LIBS)
AC_SUBST(SYSTEM_LIBJPEG)

dnl ===================================================================
dnl Check for system clucene
dnl ===================================================================
dnl we should rather be using
dnl libo_CHECK_SYSTEM_MODULE([clucence],[CLUCENE],[liblucence-core]) here
dnl but the contribs-lib check seems tricky
if test "$enable_xmlhelp" = yes -o "$enable_extension_integration" = yes; then
AC_MSG_CHECKING([which clucene to use])
if test "$with_system_clucene" = "yes"; then
    AC_MSG_RESULT([external])
    SYSTEM_CLUCENE=TRUE
    PKG_CHECK_MODULES(CLUCENE, libclucene-core)
    CLUCENE_CFLAGS=[$(printf '%s' "$CLUCENE_CFLAGS" | sed -e 's at -I[^ ]*/CLucene/ext@@' -e "s/-I/${ISYSTEM?}/g")]
    FilterLibs "${CLUCENE_LIBS}"
    CLUCENE_LIBS="${filteredlibs}"
    AC_LANG_PUSH([C++])
    save_CXXFLAGS=$CXXFLAGS
    save_CPPFLAGS=$CPPFLAGS
    CXXFLAGS="$CXXFLAGS $CLUCENE_CFLAGS"
    CPPFLAGS="$CPPFLAGS $CLUCENE_CFLAGS"
    dnl http://sourceforge.net/tracker/index.php?func=detail&aid=3392466&group_id=80013&atid=558446
    dnl https://bugzilla.redhat.com/show_bug.cgi?id=794795
    AC_CHECK_HEADER([CLucene/analysis/cjk/CJKAnalyzer.h], [],
                 [AC_MSG_ERROR([Your version of libclucene has contribs-lib missing.])], [#include <CLucene.h>])
    CXXFLAGS=$save_CXXFLAGS
    CPPFLAGS=$save_CPPFLAGS
    AC_LANG_POP([C++])

    CLUCENE_LIBS="$CLUCENE_LIBS -lclucene-contribs-lib"
else
    AC_MSG_RESULT([internal])
    SYSTEM_CLUCENE=
    BUILD_TYPE="$BUILD_TYPE CLUCENE"
fi
fi
AC_SUBST(SYSTEM_CLUCENE)
AC_SUBST(CLUCENE_CFLAGS)
AC_SUBST(CLUCENE_LIBS)

dnl ===================================================================
dnl Check for system expat
dnl ===================================================================
libo_CHECK_SYSTEM_MODULE([expat], [EXPAT], [expat])

dnl ===================================================================
dnl Check for system xmlsec
dnl ===================================================================
libo_CHECK_SYSTEM_MODULE([xmlsec], [XMLSEC], [xmlsec1-nss >= 1.2.28])

AC_MSG_CHECKING([whether to enable Embedded OpenType support])
if test "$_os" != "WINNT" -a "$_os" != "Darwin" -a "$enable_eot" = "yes"; then
    ENABLE_EOT="TRUE"
    AC_DEFINE([ENABLE_EOT])
    AC_MSG_RESULT([yes])

    libo_CHECK_SYSTEM_MODULE([libeot],[LIBEOT],[libeot >= 0.01])
else
    ENABLE_EOT=
    AC_MSG_RESULT([no])
fi
AC_SUBST([ENABLE_EOT])

dnl ===================================================================
dnl Check for DLP libs
dnl ===================================================================
AS_IF([test "$COM" = "MSC"],
      [librevenge_libdir="${WORKDIR}/LinkTarget/Library"],
      [librevenge_libdir="${WORKDIR}/UnpackedTarball/librevenge/src/lib/.libs"]
)
libo_CHECK_SYSTEM_MODULE([librevenge],[REVENGE],[librevenge-0.0 >= 0.0.1],["-I${WORKDIR}/UnpackedTarball/librevenge/inc"],["-L${librevenge_libdir} -lrevenge-0.0"])

libo_CHECK_SYSTEM_MODULE([libodfgen],[ODFGEN],[libodfgen-0.1])

libo_CHECK_SYSTEM_MODULE([libepubgen],[EPUBGEN],[libepubgen-0.1])

AS_IF([test "$COM" = "MSC"],
      [libwpd_libdir="${WORKDIR}/LinkTarget/Library"],
      [libwpd_libdir="${WORKDIR}/UnpackedTarball/libwpd/src/lib/.libs"]
)
libo_CHECK_SYSTEM_MODULE([libwpd],[WPD],[libwpd-0.10],["-I${WORKDIR}/UnpackedTarball/libwpd/inc"],["-L${libwpd_libdir} -lwpd-0.10"])

libo_CHECK_SYSTEM_MODULE([libwpg],[WPG],[libwpg-0.3])

libo_CHECK_SYSTEM_MODULE([libwps],[WPS],[libwps-0.4])
libo_PKG_VERSION([WPS], [libwps-0.4], [0.4.12])

libo_CHECK_SYSTEM_MODULE([libvisio],[VISIO],[libvisio-0.1])

libo_CHECK_SYSTEM_MODULE([libcdr],[CDR],[libcdr-0.1])

libo_CHECK_SYSTEM_MODULE([libmspub],[MSPUB],[libmspub-0.1])

libo_CHECK_SYSTEM_MODULE([libmwaw],[MWAW],[libmwaw-0.3 >= 0.3.1])
libo_PKG_VERSION([MWAW], [libmwaw-0.3], [0.3.20])

libo_CHECK_SYSTEM_MODULE([libetonyek],[ETONYEK],[libetonyek-0.1])
libo_PKG_VERSION([ETONYEK], [libetonyek-0.1], [0.1.10])

libo_CHECK_SYSTEM_MODULE([libfreehand],[FREEHAND],[libfreehand-0.1])

libo_CHECK_SYSTEM_MODULE([libebook],[EBOOK],[libe-book-0.1])
libo_PKG_VERSION([EBOOK], [libe-book-0.1], [0.1.2])

libo_CHECK_SYSTEM_MODULE([libabw],[ABW],[libabw-0.1])

libo_CHECK_SYSTEM_MODULE([libpagemaker],[PAGEMAKER],[libpagemaker-0.0])

libo_CHECK_SYSTEM_MODULE([libqxp],[QXP],[libqxp-0.0])

libo_CHECK_SYSTEM_MODULE([libzmf],[ZMF],[libzmf-0.0])

libo_CHECK_SYSTEM_MODULE([libstaroffice],[STAROFFICE],[libstaroffice-0.0])
libo_PKG_VERSION([STAROFFICE], [libstaroffice-0.0], [0.0.7])

dnl ===================================================================
dnl Check for system lcms2
dnl ===================================================================
if test "$with_system_lcms2" != "yes"; then
    SYSTEM_LCMS2=
fi
libo_CHECK_SYSTEM_MODULE([lcms2],[LCMS2],[lcms2],["-I${WORKDIR}/UnpackedTarball/lcms2/include"],["-L${WORKDIR}/UnpackedTarball/lcms2/src/.libs -llcms2"])
if test "$GCC" = "yes"; then
    LCMS2_CFLAGS="${LCMS2_CFLAGS} -Wno-long-long"
fi
if test "$COM" = "MSC"; then # override the above
    LCMS2_LIBS=${WORKDIR}/UnpackedTarball/lcms2/bin/lcms2.lib
fi

dnl ===================================================================
dnl Check for system cppunit
dnl ===================================================================
if test "$_os" != "Android" ; then
    libo_CHECK_SYSTEM_MODULE([cppunit],[CPPUNIT],[cppunit >= 1.14.0])
fi

dnl ===================================================================
dnl Check whether freetype is available
dnl ===================================================================
if test "$using_freetype_fontconfig" = yes; then
    AC_MSG_CHECKING([which freetype to use])
fi
if test "$using_freetype_fontconfig" = yes -a "$test_system_freetype" != no; then
    AC_MSG_RESULT([external])
    # FreeType has 3 different kinds of versions
    # * release, like 2.4.10
    # * libtool, like 13.0.7 (this what pkg-config returns)
    # * soname
    # FreeType's docs/VERSION.DLL provides a table mapping between the three
    #
    # 9.9.3 is 2.2.0
    # When the minimal version is at least 2.8.1, remove Skia's check down below.
    PKG_CHECK_MODULES(FREETYPE, freetype2 >= 9.9.3)
    FREETYPE_CFLAGS=$(printf '%s' "$FREETYPE_CFLAGS" | sed -e "s/-I/${ISYSTEM?}/g")
    FilterLibs "${FREETYPE_LIBS}"
    FREETYPE_LIBS="${filteredlibs}"
    SYSTEM_FREETYPE=TRUE
elif test "$using_freetype_fontconfig" = yes; then
    AC_MSG_RESULT([internal])
    FREETYPE_CFLAGS="${ISYSTEM}${WORKDIR}/UnpackedTarball/freetype/include"
    if test "x$ac_config_site_64bit_host" = xYES; then
        FREETYPE_LIBS="-L${WORKDIR}/UnpackedTarball/freetype/instdir/lib64 -lfreetype"
    else
        FREETYPE_LIBS="-L${WORKDIR}/UnpackedTarball/freetype/instdir/lib -lfreetype"
    fi
    BUILD_TYPE="$BUILD_TYPE FREETYPE"
fi
AC_SUBST(FREETYPE_CFLAGS)
AC_SUBST(FREETYPE_LIBS)
AC_SUBST([SYSTEM_FREETYPE])

# ===================================================================
# Check for system libxslt
# to prevent incompatibilities between internal libxml2 and external libxslt,
# or vice versa, use with_system_libxml here
# ===================================================================
if test "$with_system_libxml" = "auto"; then
    case "$_os" in
    WINNT|iOS|Android)
        with_system_libxml="$with_system_libs"
        ;;
    Emscripten)
        with_system_libxml=no
        ;;
    *)
        if test "$enable_fuzzers" != "yes"; then
            with_system_libxml=yes
        else
            with_system_libxml=no
        fi
        ;;
    esac
fi

AC_MSG_CHECKING([which libxslt to use])
if test "$with_system_libxml" = "yes"; then
    AC_MSG_RESULT([external])
    SYSTEM_LIBXSLT=TRUE
    if test "$_os" = "Darwin"; then
        dnl make sure to use SDK path
        LIBXSLT_CFLAGS="-I$MACOSX_SDK_PATH/usr/include/libxml2"
        LIBEXSLT_CFLAGS="$LIBXSLT_CFLAGS"
        dnl omit -L/usr/lib
        LIBXSLT_LIBS="-lxslt -lxml2 -lz -lpthread -liconv -lm"
        LIBEXSLT_LIBS="-lexslt $LIBXSLT_LIBS"
    else
        PKG_CHECK_MODULES(LIBXSLT, libxslt)
        LIBXSLT_CFLAGS=$(printf '%s' "$LIBXSLT_CFLAGS" | sed -e "s/-I/${ISYSTEM?}/g")
        FilterLibs "${LIBXSLT_LIBS}"
        LIBXSLT_LIBS="${filteredlibs}"
        PKG_CHECK_MODULES(LIBEXSLT, libexslt)
        LIBEXSLT_CFLAGS=$(printf '%s' "$LIBEXSLT_CFLAGS" | sed -e "s/-I/${ISYSTEM?}/g")
        FilterLibs "${LIBEXSLT_LIBS}"
        LIBEXSLT_LIBS=$(printf '%s' "${filteredlibs}" | sed -e "s/-lgpg-error//"  -e "s/-lgcrypt//")
    fi

    dnl Check for xsltproc
    AC_PATH_PROG(XSLTPROC, xsltproc, no)
    if test "$XSLTPROC" = "no"; then
        AC_MSG_ERROR([xsltproc is required])
    fi
else
    AC_MSG_RESULT([internal])
    SYSTEM_LIBXSLT=
    BUILD_TYPE="$BUILD_TYPE LIBXSLT"
fi
AC_SUBST(SYSTEM_LIBXSLT)
if test -z "$SYSTEM_LIBXSLT_FOR_BUILD"; then
    SYSTEM_LIBXSLT_FOR_BUILD="$SYSTEM_LIBXSLT"
fi
AC_SUBST(SYSTEM_LIBXSLT_FOR_BUILD)

AC_SUBST(LIBEXSLT_CFLAGS)
AC_SUBST(LIBEXSLT_LIBS)
AC_SUBST(LIBXSLT_CFLAGS)
AC_SUBST(LIBXSLT_LIBS)
AC_SUBST(XSLTPROC)

# ===================================================================
# Check for system libxml
# ===================================================================
AC_MSG_CHECKING([which libxml to use])
if test "$with_system_libxml" = "yes"; then
    AC_MSG_RESULT([external])
    SYSTEM_LIBXML=TRUE
    if test "$_os" = "Darwin"; then
        dnl make sure to use SDK path
        LIBXML_CFLAGS="-I$MACOSX_SDK_PATH/usr/include/libxml2"
        dnl omit -L/usr/lib
        LIBXML_LIBS="-lxml2 -lz -lpthread -liconv -lm"
    elif test $_os = iOS; then
        dnl make sure to use SDK path
        usr=`echo '#include <stdlib.h>' | $CC -E -MD - | grep usr/include/stdlib.h | head -1 | sed -e 's,# 1 ",,' -e 's,/usr/include/.*,/usr,'`
        LIBXML_CFLAGS="-I$usr/include/libxml2"
        LIBXML_LIBS="-L$usr/lib -lxml2 -liconv"
    else
        PKG_CHECK_MODULES(LIBXML, libxml-2.0 >= 2.0)
        LIBXML_CFLAGS=$(printf '%s' "$LIBXML_CFLAGS" | sed -e "s/-I/${ISYSTEM?}/g")
        FilterLibs "${LIBXML_LIBS}"
        LIBXML_LIBS="${filteredlibs}"
    fi

    dnl Check for xmllint
    AC_PATH_PROG(XMLLINT, xmllint, no)
    if test "$XMLLINT" = "no"; then
        AC_MSG_ERROR([xmllint is required])
    fi
else
    AC_MSG_RESULT([internal])
    SYSTEM_LIBXML=
    LIBXML_CFLAGS="-I${WORKDIR}/UnpackedTarball/libxml2/include"
    if test "$COM" = "MSC"; then
        LIBXML_CFLAGS="${LIBXML_CFLAGS} -I${WORKDIR}/UnpackedTarball/icu/source/i18n -I${WORKDIR}/UnpackedTarball/icu/source/common"
    fi
    if test "$COM" = "MSC"; then
        LIBXML_LIBS="${WORKDIR}/UnpackedTarball/libxml2/win32/bin.msvc/libxml2.lib"
    else
        LIBXML_LIBS="-L${WORKDIR}/UnpackedTarball/libxml2/.libs -lxml2"
        if test "$DISABLE_DYNLOADING" = TRUE -a "$ENABLE_FUZZERS" != "TRUE"; then
            LIBXML_LIBS="$LIBXML_LIBS -lm"
        fi
    fi
    BUILD_TYPE="$BUILD_TYPE LIBXML2"
fi
AC_SUBST(SYSTEM_LIBXML)
if test -z "$SYSTEM_LIBXML_FOR_BUILD"; then
    SYSTEM_LIBXML_FOR_BUILD="$SYSTEM_LIBXML"
fi
AC_SUBST(SYSTEM_LIBXML_FOR_BUILD)
AC_SUBST(LIBXML_CFLAGS)
AC_SUBST(LIBXML_LIBS)
AC_SUBST(XMLLINT)

# =====================================================================
# Checking for a Python interpreter with version >= 3.3.
# Optionally user can pass an option to configure, i. e.
# ./configure PYTHON=/usr/bin/python
# =====================================================================
if test $_os = Darwin -a "$enable_python" != no -a "$enable_python" != fully-internal -a "$enable_python" != internal -a "$enable_python" != system; then
    # Only allowed choices for macOS are 'no', 'internal' (default), and 'fully-internal'
    # unless PYTHON is defined as above which allows 'system'
    enable_python=internal
fi
if test "$build_os" != "cygwin" -a "$enable_python" != fully-internal; then
    if test -n "$PYTHON"; then
        PYTHON_FOR_BUILD=$PYTHON
    else
        # This allows a lack of system python with no error, we use internal one in that case.
        AM_PATH_PYTHON([3.3],, [:])
        # Clean PYTHON_VERSION checked below if cross-compiling
        PYTHON_VERSION=""
        if test "$PYTHON" != ":"; then
            PYTHON_FOR_BUILD=$PYTHON
        fi
    fi
fi
AC_SUBST(PYTHON_FOR_BUILD)

# Checks for Python to use for Pyuno
AC_MSG_CHECKING([which Python to use for Pyuno])
case "$enable_python" in
no|disable)
    if test -z $PYTHON_FOR_BUILD; then
        # Python is required to build LibreOffice. In theory we could separate the build-time Python
        # requirement from the choice whether to include Python stuff in the installer, but why
        # bother?
        if test "$cross_compiling" = yes; then
            enable_python=system
        else
            AC_MSG_ERROR([Python is required at build time.])
        fi
    fi
    enable_python=no
    AC_MSG_RESULT([none])
    ;;
""|yes|auto)
    if test "$DISABLE_SCRIPTING" = TRUE -a -n "$PYTHON_FOR_BUILD"; then
        AC_MSG_RESULT([no, overridden by --disable-scripting])
        enable_python=no
    elif test $build_os = cygwin; then
        dnl When building on Windows we don't attempt to use any installed
        dnl "system"  Python.
        AC_MSG_RESULT([fully internal])
        enable_python=internal
    elif test "$cross_compiling" = yes; then
        AC_MSG_RESULT([system])
        enable_python=system
    else
        # Unset variables set by the above AM_PATH_PYTHON so that
        # we actually do check anew.
        AC_MSG_RESULT([])
        unset PYTHON am_cv_pathless_PYTHON ac_cv_path_PYTHON am_cv_python_version am_cv_python_platform am_cv_python_pythondir am_cv_python_pyexecdir
        AM_PATH_PYTHON([3.3],, [:])
        AC_MSG_CHECKING([which Python to use for Pyuno])
        if test "$PYTHON" = ":"; then
            if test -z "$PYTHON_FOR_BUILD"; then
                AC_MSG_RESULT([fully internal])
            else
                AC_MSG_RESULT([internal])
            fi
            enable_python=internal
        else
            AC_MSG_RESULT([system])
            enable_python=system
        fi
    fi
    ;;
internal)
    AC_MSG_RESULT([internal])
    ;;
fully-internal)
    AC_MSG_RESULT([fully internal])
    enable_python=internal
    ;;
system)
    AC_MSG_RESULT([system])
    if test "$_os" = Darwin -a -z "$PYTHON"; then
        AC_MSG_ERROR([--enable-python=system doesn't work on macOS because the version provided is obsolete])
    fi
    ;;
*)
    AC_MSG_ERROR([Incorrect --enable-python option])
    ;;
esac

if test $enable_python != no; then
    BUILD_TYPE="$BUILD_TYPE PYUNO"
fi

if test $enable_python = system; then
    if test -n "$PYTHON_CFLAGS" -a -n "$PYTHON_LIBS"; then
        # Fallback: Accept these in the environment, or as set above
        # for MacOSX.
        :
    elif test "$cross_compiling" != yes; then
        # Unset variables set by the above AM_PATH_PYTHON so that
        # we actually do check anew.
        unset PYTHON am_cv_pathless_PYTHON ac_cv_path_PYTHON am_cv_python_version am_cv_python_platform am_cv_python_pythondir am_cv_python_pyexecdir
        # This causes an error if no python command is found
        AM_PATH_PYTHON([3.3])
        python_include=`$PYTHON -c "import distutils.sysconfig; print(distutils.sysconfig.get_config_var('INCLUDEPY'));"`
        python_version=`$PYTHON -c "import distutils.sysconfig; print(distutils.sysconfig.get_config_var('VERSION'));"`
        python_libs=`$PYTHON -c "import distutils.sysconfig; print(distutils.sysconfig.get_config_var('LIBS'));"`
        python_libdir=`$PYTHON -c "import distutils.sysconfig; print(distutils.sysconfig.get_config_var('LIBDIR'));"`
        if test -z "$PKG_CONFIG"; then
            PYTHON_CFLAGS="-I$python_include"
            PYTHON_LIBS="-L$python_libdir -lpython$python_version $python_libs"
        elif $PKG_CONFIG --exists python-$python_version-embed; then
            PYTHON_CFLAGS="`$PKG_CONFIG --cflags python-$python_version-embed`"
            PYTHON_LIBS="`$PKG_CONFIG --libs python-$python_version-embed` $python_libs"
        elif $PKG_CONFIG --exists python-$python_version; then
            PYTHON_CFLAGS="`$PKG_CONFIG --cflags python-$python_version`"
            PYTHON_LIBS="`$PKG_CONFIG --libs python-$python_version` $python_libs"
        else
            PYTHON_CFLAGS="-I$python_include"
            PYTHON_LIBS="-L$python_libdir -lpython$python_version $python_libs"
        fi
        FilterLibs "${PYTHON_LIBS}"
        PYTHON_LIBS="${filteredlibs}"
    else
        dnl How to find out the cross-compilation Python installation path?
        AC_MSG_CHECKING([for python version])
        AS_IF([test -n "$PYTHON_VERSION"],
              [AC_MSG_RESULT([$PYTHON_VERSION])],
              [AC_MSG_RESULT([not found])
               AC_MSG_ERROR([no usable python found])])
        test -n "$PYTHON_CFLAGS" && break
    fi

    dnl Check if the headers really work
    save_CPPFLAGS="$CPPFLAGS"
    CPPFLAGS="$CPPFLAGS $PYTHON_CFLAGS"
    AC_CHECK_HEADER(Python.h)
    CPPFLAGS="$save_CPPFLAGS"

    # let the PYTHON_FOR_BUILD match the same python installation that
    # provides PYTHON_CFLAGS/PYTHON_LDFLAGS for pyuno, which should be
    # better for PythonTests.
    PYTHON_FOR_BUILD=$PYTHON
fi

if test "$with_lxml" != no; then
    if test -z "$PYTHON_FOR_BUILD"; then
        case $build_os in
            cygwin)
                AC_MSG_WARN([No system-provided python lxml, gla11y will only report widget classes and ids])
                ;;
            *)
                if test "$cross_compiling" != yes ; then
                    BUILD_TYPE="$BUILD_TYPE LXML"
                fi
                ;;
        esac
    else
        AC_MSG_CHECKING([for python lxml])
        if $PYTHON_FOR_BUILD -c "import lxml.etree as ET" 2> /dev/null ; then
            AC_MSG_RESULT([yes])
        else
            case $build_os in
                cygwin)
                    AC_MSG_RESULT([no, gla11y will only report widget classes and ids])
                    ;;
                *)
                    if test "$cross_compiling" != yes -a "x$ac_cv_header_Python_h" = "xyes"; then
                        if test -n ${SYSTEM_LIBXSLT} -o -n ${SYSTEM_LIBXML}; then
                            AC_MSG_RESULT([no, and no system libxml/libxslt, gla11y will only report widget classes and ids])
                        else
                            BUILD_TYPE="$BUILD_TYPE LXML"
                            AC_MSG_RESULT([no, using internal lxml])
                        fi
                    else
                        AC_MSG_RESULT([no, and system does not provide python development headers, gla11y will only report widget classes and ids])
                    fi
                    ;;
            esac
        fi
    fi
fi

dnl By now enable_python should be "system", "internal" or "no"
case $enable_python in
system)
    SYSTEM_PYTHON=TRUE

    if test "x$ac_cv_header_Python_h" != "xyes"; then
       AC_MSG_ERROR([Python headers not found. You probably want to set both the PYTHON_CFLAGS and PYTHON_LIBS environment variables.])
    fi

    AC_LANG_PUSH(C)
    CFLAGS="$CFLAGS $PYTHON_CFLAGS"
    AC_MSG_CHECKING([for correct python library version])
       AC_RUN_IFELSE([AC_LANG_SOURCE([[
#include <Python.h>

int main(int argc, char **argv) {
   if ((PY_MAJOR_VERSION == 3 && PY_MINOR_VERSION >= 3)) return 0;
   else return 1;
}
       ]])],[AC_MSG_RESULT([ok])],[AC_MSG_ERROR([Python >= 3.3 is needed when building with Python 3])],[AC_MSG_RESULT([skipped; cross-compiling])])
    AC_LANG_POP(C)

    dnl FIXME Check if the Python library can be linked with, too?
    ;;

internal)
    SYSTEM_PYTHON=
    PYTHON_VERSION_MAJOR=3
    PYTHON_VERSION_MINOR=8
    PYTHON_VERSION=${PYTHON_VERSION_MAJOR}.${PYTHON_VERSION_MINOR}.10
    if ! grep -q -i python.*${PYTHON_VERSION} ${SRC_ROOT}/download.lst; then
        AC_MSG_ERROR([PYTHON_VERSION ${PYTHON_VERSION} but no matching file in download.lst])
    fi
    AC_DEFINE_UNQUOTED([PYTHON_VERSION_STRING], [L"${PYTHON_VERSION}"])
    BUILD_TYPE="$BUILD_TYPE PYTHON"
    if test "$OS" = LINUX -o "$OS" = WNT ; then
        BUILD_TYPE="$BUILD_TYPE LIBFFI"
    fi
    # Embedded Python dies without Home set
    if test "$HOME" = ""; then
        export HOME=""
    fi
    ;;
no)
    DISABLE_PYTHON=TRUE
    SYSTEM_PYTHON=
    ;;
*)
    AC_MSG_ERROR([Internal configure script error, invalid enable_python value "$enable_python"])
    ;;
esac

AC_SUBST(DISABLE_PYTHON)
AC_SUBST(SYSTEM_PYTHON)
AC_SUBST(PYTHON_CFLAGS)
AC_SUBST(PYTHON_LIBS)
AC_SUBST(PYTHON_VERSION)
AC_SUBST(PYTHON_VERSION_MAJOR)
AC_SUBST(PYTHON_VERSION_MINOR)

AC_MSG_CHECKING([whether to build LibreLogo])
case "$enable_python" in
no|disable)
    AC_MSG_RESULT([no; Python disabled])
    ;;
*)
    if test "${enable_librelogo}" = "no"; then
        AC_MSG_RESULT([no])
    else
        AC_MSG_RESULT([yes])
        BUILD_TYPE="${BUILD_TYPE} LIBRELOGO"
        AC_DEFINE([ENABLE_LIBRELOGO],1)
    fi
    ;;
esac
AC_SUBST(ENABLE_LIBRELOGO)

ENABLE_MARIADBC=
MARIADBC_MAJOR=1
MARIADBC_MINOR=0
MARIADBC_MICRO=2
AC_MSG_CHECKING([whether to build the MariaDB/MySQL SDBC driver])
if test "x$enable_mariadb_sdbc" != "xno" -a "$enable_mpl_subset" != "yes"; then
    ENABLE_MARIADBC=TRUE
    AC_MSG_RESULT([yes])
    BUILD_TYPE="$BUILD_TYPE MARIADBC"
else
    AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_MARIADBC)
AC_SUBST(MARIADBC_MAJOR)
AC_SUBST(MARIADBC_MINOR)
AC_SUBST(MARIADBC_MICRO)

if test "$ENABLE_MARIADBC" = "TRUE"; then
    dnl ===================================================================
    dnl Check for system MariaDB
    dnl ===================================================================
    AC_MSG_CHECKING([which MariaDB to use])
    if test "$with_system_mariadb" = "yes"; then
        AC_MSG_RESULT([external])
        SYSTEM_MARIADB_CONNECTOR_C=TRUE
        #AC_PATH_PROG(MARIADBCONFIG, [mariadb_config])
        if test -z "$MARIADBCONFIG"; then
            AC_PATH_PROG(MARIADBCONFIG, [mysql_config])
            if test -z "$MARIADBCONFIG"; then
                AC_MSG_ERROR([mysql_config is missing. Install MySQL client library development package.])
                #AC_MSG_ERROR([mariadb_config and mysql_config are missing. Install MariaDB or MySQL client library development package.])
            fi
        fi
        AC_MSG_CHECKING([MariaDB version])
        MARIADB_VERSION=`$MARIADBCONFIG --version`
        MARIADB_MAJOR=`$MARIADBCONFIG --version | cut -d"." -f1`
        if test "$MARIADB_MAJOR" -ge "5"; then
            AC_MSG_RESULT([OK])
        else
            AC_MSG_ERROR([too old, use 5.0.x or later])
        fi
        AC_MSG_CHECKING([for MariaDB Client library])
        MARIADB_CFLAGS=`$MARIADBCONFIG --cflags`
        if test "$COM_IS_CLANG" = TRUE; then
            MARIADB_CFLAGS=$(printf '%s' "$MARIADB_CFLAGS" | sed -e s/-fstack-protector-strong//)
        fi
        MARIADB_LIBS=`$MARIADBCONFIG --libs_r`
        dnl At least mariadb-5.5.34-3.fc20.x86_64 plus
        dnl mariadb-5.5.34-3.fc20.i686 reports 64-bit specific output even under
        dnl linux32:
        if test "$OS" = LINUX -a "$CPUNAME" = INTEL; then
            MARIADB_CFLAGS=$(printf '%s' "$MARIADB_CFLAGS" | sed -e s/-m64//)
            MARIADB_LIBS=$(printf '%s' "$MARIADB_LIBS" \
                | sed -e 's|/lib64/|/lib/|')
        fi
        FilterLibs "${MARIADB_LIBS}"
        MARIADB_LIBS="${filteredlibs}"
        AC_MSG_RESULT([includes '$MARIADB_CFLAGS', libraries '$MARIADB_LIBS'])
        AC_MSG_CHECKING([whether to bundle the MySQL/MariaDB client library])
        if test "$enable_bundle_mariadb" = "yes"; then
            AC_MSG_RESULT([yes])
            BUNDLE_MARIADB_CONNECTOR_C=TRUE
            LIBMARIADB=lib$(echo "${MARIADB_LIBS}" | sed -e 's/[[[:space:]]]\{1,\}-l\([[^[:space:]]]\{1,\}\)/\
\1\
/g' -e 's/^-l\([[^[:space:]]]\{1,\}\)[[[:space:]]]*/\
\1\
/g' | grep -E '(mysqlclient|mariadb)')
            if test "$_os" = "Darwin"; then
                LIBMARIADB=${LIBMARIADB}.dylib
            elif test "$_os" = "WINNT"; then
                LIBMARIADB=${LIBMARIADB}.dll
            else
                LIBMARIADB=${LIBMARIADB}.so
            fi
            LIBMARIADB_PATH=$($MARIADBCONFIG --variable=pkglibdir)
            AC_MSG_CHECKING([for $LIBMARIADB in $LIBMARIADB_PATH])
            if test -e "$LIBMARIADB_PATH/$LIBMARIADB"; then
                AC_MSG_RESULT([found.])
                PathFormat "$LIBMARIADB_PATH"
                LIBMARIADB_PATH="$formatted_path"
            else
                AC_MSG_ERROR([not found.])
            fi
        else
            AC_MSG_RESULT([no])
            BUNDLE_MARIADB_CONNECTOR_C=
        fi
    else
        AC_MSG_RESULT([internal])
        SYSTEM_MARIADB_CONNECTOR_C=
        MARIADB_CFLAGS="-I${WORKDIR}/UnpackedTarball/mariadb-connector-c/include"
        MARIADB_LIBS="-L${WORKDIR}/LinkTarget/StaticLibrary -lmariadb-connector-c"
        BUILD_TYPE="$BUILD_TYPE MARIADB_CONNECTOR_C"
    fi

    AC_SUBST(SYSTEM_MARIADB_CONNECTOR_C)
    AC_SUBST(MARIADB_CFLAGS)
    AC_SUBST(MARIADB_LIBS)
    AC_SUBST(LIBMARIADB)
    AC_SUBST(LIBMARIADB_PATH)
    AC_SUBST(BUNDLE_MARIADB_CONNECTOR_C)
fi

dnl ===================================================================
dnl Check for system hsqldb
dnl ===================================================================
if test "$with_java" != "no" -a "$cross_compiling" != "yes"; then
    HSQLDB_USE_JDBC_4_1=
    AC_MSG_CHECKING([which hsqldb to use])
    if test "$with_system_hsqldb" = "yes"; then
        AC_MSG_RESULT([external])
        SYSTEM_HSQLDB=TRUE
        if test -z $HSQLDB_JAR; then
            HSQLDB_JAR=/usr/share/java/hsqldb.jar
        fi
        if ! test -f $HSQLDB_JAR; then
               AC_MSG_ERROR(hsqldb.jar not found.)
        fi
        AC_MSG_CHECKING([whether hsqldb is 1.8.0.x])
        export HSQLDB_JAR
        if $PERL -e \
           'use Archive::Zip;
            my $file = "$ENV{'HSQLDB_JAR'}";
            my $zip = Archive::Zip->new( $file );
            my $mf = $zip->contents ( "META-INF/MANIFEST.MF" );
            if ( $mf =~ m/Specification-Version: 1.8.*/ )
            {
                push @l, split(/\n/, $mf);
                foreach my $line (@l)
                {
                    if ($line =~ m/Specification-Version:/)
                    {
                        ($t, $version) = split (/:/,$line);
                        $version =~ s/^\s//;
                        ($a, $b, $c, $d) = split (/\./,$version);
                        if ($c == "0" && $d > "8")
                        {
                            exit 0;
                        }
                        else
                        {
                            exit 1;
                        }
                    }
                }
            }
            else
            {
                exit 1;
            }'; then
            AC_MSG_RESULT([yes])
        else
            AC_MSG_ERROR([no, you need hsqldb >= 1.8.0.9 but < 1.8.1])
        fi
    else
        AC_MSG_RESULT([internal])
        SYSTEM_HSQLDB=
        BUILD_TYPE="$BUILD_TYPE HSQLDB"
        NEED_ANT=TRUE
        AC_MSG_CHECKING([whether hsqldb should be built with JDBC 4.1])
        javanumver=`$JAVAINTERPRETER -version 2>&1 | $AWK -v num=true -f $SRC_ROOT/solenv/bin/getcompver.awk`
        if expr "$javanumver" '>=' 000100060000 > /dev/null; then
            AC_MSG_RESULT([yes])
            HSQLDB_USE_JDBC_4_1=TRUE
        else
            AC_MSG_RESULT([no])
        fi
    fi
else
    if test "$with_java" != "no" -a -z "$HSQLDB_JAR"; then
        BUILD_TYPE="$BUILD_TYPE HSQLDB"
    fi
fi
AC_SUBST(SYSTEM_HSQLDB)
AC_SUBST(HSQLDB_JAR)
AC_SUBST([HSQLDB_USE_JDBC_4_1])

dnl ===================================================================
dnl Check for PostgreSQL stuff
dnl ===================================================================
AC_MSG_CHECKING([whether to build the PostgreSQL SDBC driver])
if test "x$enable_postgresql_sdbc" != "xno"; then
    AC_MSG_RESULT([yes])
    SCPDEFS="$SCPDEFS -DWITH_POSTGRESQL_SDBC"

    if test "$with_krb5" = "yes" -a "$enable_openssl" = "no"; then
        AC_MSG_ERROR([krb5 needs OpenSSL, but --disable-openssl was given.])
    fi
    if test "$with_gssapi" = "yes" -a "$enable_openssl" = "no"; then
        AC_MSG_ERROR([GSSAPI needs OpenSSL, but --disable-openssl was given.])
    fi

    postgres_interface=""
    if test "$with_system_postgresql" = "yes"; then
        postgres_interface="external PostgreSQL"
        SYSTEM_POSTGRESQL=TRUE
        if test "$_os" = Darwin; then
            supp_path=''
            for d in /Library/PostgreSQL/9.*/bin /sw/opt/postgresql/9.*/bin /opt/local/lib/postgresql9*/bin; do
                pg_supp_path="$P_SEP$d$pg_supp_path"
            done
        fi
        AC_PATH_PROG(PGCONFIG, pg_config, ,$PATH$pg_supp_path)
        if test -n "$PGCONFIG"; then
            POSTGRESQL_INC=-I$(${PGCONFIG} --includedir)
            POSTGRESQL_LIB="-L$(${PGCONFIG} --libdir)"
        else
            PKG_CHECK_MODULES(POSTGRESQL, libpq, [
              POSTGRESQL_INC=$POSTGRESQL_CFLAGS
              POSTGRESQL_LIB=$POSTGRESQL_LIBS
            ],[
              AC_MSG_ERROR([pg_config or 'pkg-config libpq' needed; set PGCONFIG if not in PATH])
            ])
        fi
        FilterLibs "${POSTGRESQL_LIB}"
        POSTGRESQL_LIB="${filteredlibs}"
    else
        # if/when anything else than PostgreSQL uses Kerberos,
        # move this out of `test "x$enable_postgresql_sdbc" != "xno"'
        WITH_KRB5=
        WITH_GSSAPI=
        case "$_os" in
        Darwin)
            # macOS has system MIT Kerberos 5 since 10.4
            if test "$with_krb5" != "no"; then
                WITH_KRB5=TRUE
                save_LIBS=$LIBS
                # Not sure whether it makes any sense here to search multiple potential libraries; it is not likely
                # that the libraries where these functions are located on macOS will change, is it?
                AC_SEARCH_LIBS(com_err, [com_err 'com_err -lssl -lcrypto' krb5 'krb5 -lcrypto -ldes -lasn1 -lroken'], [],
                    [AC_MSG_ERROR([could not find function 'com_err' required for Kerberos 5])])
                KRB5_LIBS=$LIBS
                LIBS=$save_LIBS
                AC_SEARCH_LIBS(krb5_sendauth, [krb5 'krb5 -lcrypto -ldes -lasn1 -lroken'], [],
                    [AC_MSG_ERROR([could not find function 'krb5_sendauth' required for Kerberos 5])])
                KRB5_LIBS="$KRB5_LIBS $LIBS"
                LIBS=$save_LIBS
            fi
            if test "$with_gssapi" != "no"; then
                WITH_GSSAPI=TRUE
                save_LIBS=$LIBS
                AC_SEARCH_LIBS(gss_init_sec_context, [gssapi_krb5 gss 'gssapi -lkrb5 -lcrypto'], [],
                    [AC_MSG_ERROR([could not find function 'gss_init_sec_context' required for GSSAPI])])
                GSSAPI_LIBS=$LIBS
                LIBS=$save_LIBS
            fi
            ;;
        WINNT)
            if test "$with_krb5" = "yes" -o "$with_gssapi" = "yes"; then
                AC_MSG_ERROR([Refusing to enable MIT Kerberos 5 or GSSAPI on Windows.])
            fi
            ;;
        Linux|GNU|*BSD|DragonFly)
            if test "$with_krb5" != "no"; then
                WITH_KRB5=TRUE
                save_LIBS=$LIBS
                AC_SEARCH_LIBS(com_err, [com_err 'com_err -lssl -lcrypto' krb5 'krb5 -lcrypto -ldes -lasn1 -lroken'], [],
                    [AC_MSG_ERROR([could not find function 'com_err' required for Kerberos 5])])
                KRB5_LIBS=$LIBS
                LIBS=$save_LIBS
                AC_SEARCH_LIBS(krb5_sendauth, [krb5 'krb5 -lcrypto -ldes -lasn1 -lroken'], [],
                    [AC_MSG_ERROR([could not find function 'krb5_sendauth' required for Kerberos 5])])
                KRB5_LIBS="$KRB5_LIBS $LIBS"
                LIBS=$save_LIBS
            fi
            if test "$with_gssapi" != "no"; then
                WITH_GSSAPI=TRUE
                save_LIBS=$LIBS
                AC_SEARCH_LIBS(gss_init_sec_context, [gssapi_krb5 gss 'gssapi -lkrb5 -lcrypto'], [],
                    [AC_MSG_ERROR([could not find function 'gss_init_sec_context' required for GSSAPI])])
                GSSAPI_LIBS=$LIBS
                LIBS=$save_LIBS
            fi
            ;;
        *)
            if test "$with_krb5" = "yes"; then
                WITH_KRB5=TRUE
                save_LIBS=$LIBS
                AC_SEARCH_LIBS(com_err, [com_err 'com_err -lssl -lcrypto' krb5 'krb5 -lcrypto -ldes -lasn1 -lroken'], [],
                    [AC_MSG_ERROR([could not find function 'com_err' required for Kerberos 5])])
                KRB5_LIBS=$LIBS
                LIBS=$save_LIBS
                AC_SEARCH_LIBS(krb5_sendauth, [krb5 'krb5 -lcrypto -ldes -lasn1 -lroken'], [],
                    [AC_MSG_ERROR([could not find function 'krb5_sendauth' required for Kerberos 5])])
                KRB5_LIBS="$KRB5_LIBS $LIBS"
                LIBS=$save_LIBS
            fi
            if test "$with_gssapi" = "yes"; then
                WITH_GSSAPI=TRUE
                save_LIBS=$LIBS
                AC_SEARCH_LIBS(gss_init_sec_context, [gssapi_krb5 gss 'gssapi -lkrb5 -lcrypto'], [],
                    [AC_MSG_ERROR([could not find function 'gss_init_sec_context' required for GSSAPI])])
                LIBS=$save_LIBS
                GSSAPI_LIBS=$LIBS
            fi
        esac

        if test -n "$with_libpq_path"; then
            SYSTEM_POSTGRESQL=TRUE
            postgres_interface="external libpq"
            POSTGRESQL_LIB="-L${with_libpq_path}/lib/"
            POSTGRESQL_INC=-I"${with_libpq_path}/include/"
        else
            SYSTEM_POSTGRESQL=
            postgres_interface="internal"
            POSTGRESQL_LIB=""
            POSTGRESQL_INC="%OVERRIDE_ME%"
            BUILD_TYPE="$BUILD_TYPE POSTGRESQL"
        fi
    fi

    AC_MSG_CHECKING([PostgreSQL C interface])
    AC_MSG_RESULT([$postgres_interface])

    if test "${SYSTEM_POSTGRESQL}" = "TRUE"; then
        AC_MSG_NOTICE([checking system PostgreSQL prerequisites])
        save_CFLAGS=$CFLAGS
        save_CPPFLAGS=$CPPFLAGS
        save_LIBS=$LIBS
        CPPFLAGS="${CPPFLAGS} ${POSTGRESQL_INC}"
        LIBS="${LIBS} ${POSTGRESQL_LIB}"
        AC_CHECK_HEADER([libpq-fe.h], [], [AC_MSG_ERROR([libpq-fe.h is needed])], [])
        AC_CHECK_LIB([pq], [PQconnectdbParams], [:],
            [AC_MSG_ERROR(libpq not found or too old. Need >= 9.0)], [])
        CFLAGS=$save_CFLAGS
        CPPFLAGS=$save_CPPFLAGS
        LIBS=$save_LIBS
    fi
    BUILD_POSTGRESQL_SDBC=TRUE
else
    AC_MSG_RESULT([no])
fi
AC_SUBST(WITH_KRB5)
AC_SUBST(WITH_GSSAPI)
AC_SUBST(GSSAPI_LIBS)
AC_SUBST(KRB5_LIBS)
AC_SUBST(BUILD_POSTGRESQL_SDBC)
AC_SUBST(SYSTEM_POSTGRESQL)
AC_SUBST(POSTGRESQL_INC)
AC_SUBST(POSTGRESQL_LIB)

dnl ===================================================================
dnl Check for Firebird stuff
dnl ===================================================================
ENABLE_FIREBIRD_SDBC=
if test "$enable_firebird_sdbc" = "yes" ; then
    SCPDEFS="$SCPDEFS -DWITH_FIREBIRD_SDBC"

    dnl ===================================================================
    dnl Check for system Firebird
    dnl ===================================================================
    AC_MSG_CHECKING([which Firebird to use])
    if test "$with_system_firebird" = "yes"; then
        AC_MSG_RESULT([external])
        SYSTEM_FIREBIRD=TRUE
        AC_PATH_PROG(FIREBIRDCONFIG, [fb_config])
        if test -z "$FIREBIRDCONFIG"; then
            AC_MSG_NOTICE([No fb_config -- using pkg-config])
            PKG_CHECK_MODULES([FIREBIRD], [fbclient >= 3], [FIREBIRD_PKGNAME=fbclient], [
                PKG_CHECK_MODULES([FIREBIRD], [fbembed], [FIREBIRD_PKGNAME=fbembed])
            ])
            FIREBIRD_VERSION=`pkg-config --modversion "$FIREBIRD_PKGNAME"`
        else
            AC_MSG_NOTICE([fb_config found])
            FIREBIRD_VERSION=`$FIREBIRDCONFIG --version`
            AC_MSG_CHECKING([for Firebird Client library])
            FIREBIRD_CFLAGS=`$FIREBIRDCONFIG --cflags`
            FIREBIRD_LIBS=`$FIREBIRDCONFIG --embedlibs`
            FilterLibs "${FIREBIRD_LIBS}"
            FIREBIRD_LIBS="${filteredlibs}"
        fi
        AC_MSG_RESULT([includes `$FIREBIRD_CFLAGS', libraries `$FIREBIRD_LIBS'])
        AC_MSG_CHECKING([Firebird version])
        if test -n "${FIREBIRD_VERSION}"; then
            FIREBIRD_MAJOR=`echo $FIREBIRD_VERSION | cut -d"." -f1`
            if test "$FIREBIRD_MAJOR" -ge "3"; then
                AC_MSG_RESULT([OK])
            else
                AC_MSG_ERROR([Ensure firebird >= 3 is installed])
            fi
        else
            save_CFLAGS="${CFLAGS}"
            CFLAGS="${CFLAGS} ${FIREBIRD_CFLAGS}"
            AC_COMPILE_IFELSE([AC_LANG_SOURCE([[#include <ibase.h>
#if defined(FB_API_VER) && FB_API_VER == 30
int fb_api_is_30(void) { return 0; }
#else
#error "Wrong Firebird API version"
#endif]])],AC_MSG_RESULT([OK]),AC_MSG_ERROR([Ensure firebird 3.0.x is installed]))
            CFLAGS="$save_CFLAGS"
        fi
        ENABLE_FIREBIRD_SDBC=TRUE
        AC_DEFINE([ENABLE_FIREBIRD_SDBC],1)
    elif test "$enable_database_connectivity" = no; then
        AC_MSG_RESULT([none])
    elif test "$cross_compiling" = "yes"; then
        AC_MSG_RESULT([none])
    else
        dnl Embedded Firebird has version 3.0
        dnl We need libatomic_ops for any non X86/X64 system
        if test "${CPUNAME}" != INTEL -a "${CPUNAME}" != X86_64; then
            dnl ===================================================================
            dnl Check for system libatomic_ops
            dnl ===================================================================
            libo_CHECK_SYSTEM_MODULE([libatomic_ops],[LIBATOMIC_OPS],[atomic_ops >= 0.7.2])
            if test "$with_system_libatomic_ops" = "yes"; then
                SYSTEM_LIBATOMIC_OPS=TRUE
                AC_CHECK_HEADERS(atomic_ops.h, [],
                [AC_MSG_ERROR(atomic_ops.h not found. install libatomic_ops)], [])
            else
                SYSTEM_LIBATOMIC_OPS=
                LIBATOMIC_OPS_CFLAGS="-I${WORKDIR}/UnpackedTarball/libatomic_ops/include"
                LIBATOMIC_OPS_LIBS="-latomic_ops"
                BUILD_TYPE="$BUILD_TYPE LIBATOMIC_OPS"
            fi
        fi

        AC_MSG_RESULT([internal])
        SYSTEM_FIREBIRD=
        FIREBIRD_CFLAGS="-I${WORKDIR}/UnpackedTarball/firebird/gen/Release/firebird/include"
        FIREBIRD_LIBS="-lfbclient"

        if test "$with_system_libtommath" = "yes"; then
            SYSTEM_LIBTOMMATH=TRUE
            dnl check for tommath presence
            save_LIBS=$LIBS
            AC_CHECK_HEADER(tommath.h,,AC_MSG_ERROR(Include file for tommath not found - please install development tommath package))
            AC_CHECK_LIB(tommath, mp_init, LIBTOMMATH_LIBS=-ltommath, AC_MSG_ERROR(Library tommath not found - please install development tommath package))
            LIBS=$save_LIBS
        else
            SYSTEM_LIBTOMMATH=
            LIBTOMMATH_CFLAGS="-I${WORKDIR}/UnpackedTarball/libtommath"
            LIBTOMMATH_LIBS="-ltommath"
            BUILD_TYPE="$BUILD_TYPE LIBTOMMATH"
        fi

        BUILD_TYPE="$BUILD_TYPE FIREBIRD"
        ENABLE_FIREBIRD_SDBC=TRUE
        AC_DEFINE([ENABLE_FIREBIRD_SDBC],1)
    fi
fi
AC_SUBST(ENABLE_FIREBIRD_SDBC)
AC_SUBST(SYSTEM_LIBATOMIC_OPS)
AC_SUBST(LIBATOMIC_OPS_CFLAGS)
AC_SUBST(LIBATOMIC_OPS_LIBS)
AC_SUBST(SYSTEM_FIREBIRD)
AC_SUBST(FIREBIRD_CFLAGS)
AC_SUBST(FIREBIRD_LIBS)
AC_SUBST(SYSTEM_LIBTOMMATH)
AC_SUBST(LIBTOMMATH_CFLAGS)
AC_SUBST(LIBTOMMATH_LIBS)

dnl ===================================================================
dnl Check for system curl
dnl ===================================================================
AC_MSG_CHECKING([which libcurl to use])
if test "$with_system_curl" = "auto"; then
    with_system_curl="$with_system_libs"
fi

if test "$enable_curl" = "yes" -a "$with_system_curl" = "yes"; then
    AC_MSG_RESULT([external])
    SYSTEM_CURL=TRUE

    PKG_CHECK_MODULES(CURL, libcurl >= 7.68.0)

    ENABLE_CURL=TRUE
elif test "$enable_curl" = "no"; then
    AC_MSG_RESULT([none])
else
    AC_MSG_RESULT([internal])
    SYSTEM_CURL=
    BUILD_TYPE="$BUILD_TYPE CURL"
    ENABLE_CURL=TRUE
fi
AC_SUBST(SYSTEM_CURL)
AC_SUBST(CURL_CFLAGS)
AC_SUBST(CURL_LIBS)
AC_SUBST(ENABLE_CURL)

dnl ===================================================================
dnl Check for system boost
dnl ===================================================================
AC_MSG_CHECKING([which boost to use])
if test "$with_system_boost" = "yes"; then
    AC_MSG_RESULT([external])
    SYSTEM_BOOST=TRUE
    AX_BOOST_BASE([1.66],,[AC_MSG_ERROR([no suitable Boost found])])
    AX_BOOST_DATE_TIME
    AX_BOOST_FILESYSTEM
    AX_BOOST_IOSTREAMS
    AX_BOOST_LOCALE
    AC_LANG_PUSH([C++])
    save_CXXFLAGS=$CXXFLAGS
    CXXFLAGS="$CXXFLAGS $BOOST_CPPFLAGS $CXXFLAGS_CXX11"
    AC_CHECK_HEADER(boost/shared_ptr.hpp, [],
       [AC_MSG_ERROR(boost/shared_ptr.hpp not found. install boost)], [])
    AC_CHECK_HEADER(boost/spirit/include/classic_core.hpp, [],
       [AC_MSG_ERROR(boost/spirit/include/classic_core.hpp not found. install boost >= 1.36)], [])
    CXXFLAGS=$save_CXXFLAGS
    AC_LANG_POP([C++])
    # this is in m4/ax_boost_base.m4
    FilterLibs "${BOOST_LDFLAGS}"
    BOOST_LDFLAGS="${filteredlibs}"
else
    AC_MSG_RESULT([internal])
    BUILD_TYPE="$BUILD_TYPE BOOST"
    SYSTEM_BOOST=
    if test "${COM}" = "GCC" -o "${COM_IS_CLANG}" = "TRUE"; then
        # use warning-suppressing wrapper headers
        BOOST_CPPFLAGS="-I${SRC_ROOT}/external/boost/include -I${WORKDIR}/UnpackedTarball/boost"
    else
        BOOST_CPPFLAGS="-I${WORKDIR}/UnpackedTarball/boost"
    fi
fi
AC_SUBST(SYSTEM_BOOST)

dnl ===================================================================
dnl Check for system mdds
dnl ===================================================================
libo_CHECK_SYSTEM_MODULE([mdds], [MDDS], [mdds-2.0 >= 2.0.0], ["-I${WORKDIR}/UnpackedTarball/mdds/include"])

dnl ===================================================================
dnl Check for system cuckoo
dnl ===================================================================
AC_MSG_CHECKING([which cuckoo to use])
if test "$with_system_cuckoo" = "yes"; then
    AC_MSG_RESULT([external])
    SYSTEM_CUCKOO=TRUE
    AC_LANG_PUSH([C++])
    AC_CHECK_HEADER([libcuckoo/cuckoohash_map.hh], [],
       [AC_MSG_ERROR([libcuckoo/cuckoohash_map.hh not found. install cuckoo])], [])
    AC_LANG_POP([C++])
else
    AC_MSG_RESULT([internal])
    BUILD_TYPE="$BUILD_TYPE CUCKOO"
    SYSTEM_CUCKOO=
    CUCKOO_CFLAGS="${ISYSTEM}${WORKDIR}/UnpackedTarball/cuckoo"
fi
AC_SUBST([CUCKOO_CFLAGS])
AC_SUBST([SYSTEM_CUCKOO])

dnl ===================================================================
dnl Check for system glm
dnl ===================================================================
AC_MSG_CHECKING([which glm to use])
if test "$with_system_glm" = "yes"; then
    AC_MSG_RESULT([external])
    SYSTEM_GLM=TRUE
    AC_LANG_PUSH([C++])
    AC_CHECK_HEADER([glm/glm.hpp], [],
       [AC_MSG_ERROR([glm/glm.hpp not found. install glm])], [])
    AC_LANG_POP([C++])
else
    AC_MSG_RESULT([internal])
    BUILD_TYPE="$BUILD_TYPE GLM"
    SYSTEM_GLM=
    GLM_CFLAGS="${ISYSTEM}${WORKDIR}/UnpackedTarball/glm"
fi
AC_SUBST([GLM_CFLAGS])
AC_SUBST([SYSTEM_GLM])

dnl ===================================================================
dnl Check for system odbc
dnl ===================================================================
AC_MSG_CHECKING([which odbc headers to use])
if test "$with_system_odbc" = "yes" -o '(' "$with_system_headers" = "yes" -a "$with_system_odbc" = "auto" ')' -o '(' "$_os" = "WINNT" -a  "$with_system_odbc" != "no" ')'; then
    AC_MSG_RESULT([external])
    SYSTEM_ODBC_HEADERS=TRUE

    if test "$build_os" = "cygwin" -o "$build_os" = "wsl"; then
        save_CPPFLAGS=$CPPFLAGS
        find_winsdk
        PathFormat "$winsdktest"
        CPPFLAGS="$CPPFLAGS -I$formatted_path/include/um -I$formatted_path/Include/$winsdklibsubdir/um -I$formatted_path/include -I$formatted_path/include/shared -I$formatted_path/include/$winsdklibsubdir/shared"
        AC_CHECK_HEADER(sqlext.h, [],
            [AC_MSG_ERROR(odbc not found. install odbc)],
            [#include <windows.h>])
        CPPFLAGS=$save_CPPFLAGS
    else
        AC_CHECK_HEADER(sqlext.h, [],
            [AC_MSG_ERROR(odbc not found. install odbc)],[])
    fi
elif test "$enable_database_connectivity" = no; then
    AC_MSG_RESULT([none])
else
    AC_MSG_RESULT([internal])
    SYSTEM_ODBC_HEADERS=
fi
AC_SUBST(SYSTEM_ODBC_HEADERS)

dnl ===================================================================
dnl Check for system NSS
dnl ===================================================================
if test "$enable_fuzzers" != "yes" -a "$enable_nss" = "yes"; then
    libo_CHECK_SYSTEM_MODULE([nss],[NSS],[nss >= 3.9.3 nspr >= 4.8])
    AC_DEFINE(HAVE_FEATURE_NSS)
    ENABLE_NSS=TRUE
elif test $_os != iOS ; then
    with_tls=openssl
fi
AC_SUBST(ENABLE_NSS)

dnl ===================================================================
dnl Enable LDAP support
dnl ===================================================================

if test "$test_openldap" = yes; then
    AC_MSG_CHECKING([whether to enable LDAP support])
    if test "$enable_ldap" = yes -a \( "$ENABLE_NSS" = TRUE -o "$with_system_openldap" = yes \); then
        AC_MSG_RESULT([yes])
        ENABLE_LDAP=TRUE
    else
        if test "$enable_ldap" != "yes"; then
            AC_MSG_RESULT([no])
        else
            AC_MSG_RESULT([no (needs NSS or system openldap)])
        fi
    fi

dnl ===================================================================
dnl Check for system openldap
dnl ===================================================================

    if test "$ENABLE_LDAP" = TRUE; then
        AC_MSG_CHECKING([which openldap library to use])
        if test "$with_system_openldap" = yes; then
            AC_MSG_RESULT([external])
            SYSTEM_OPENLDAP=TRUE
            AC_CHECK_HEADERS(ldap.h, [], [AC_MSG_ERROR(ldap.h not found. install openldap libs)], [])
            AC_CHECK_LIB([ldap], [ldap_simple_bind_s], [:], [AC_MSG_ERROR(openldap lib not found or functional)], [])
            AC_CHECK_LIB([ldap], [ldap_set_option], [:], [AC_MSG_ERROR(openldap lib not found or functional)], [])
        else
            AC_MSG_RESULT([internal])
            BUILD_TYPE="$BUILD_TYPE OPENLDAP"
        fi
    fi
fi

AC_SUBST(ENABLE_LDAP)
AC_SUBST(SYSTEM_OPENLDAP)

dnl ===================================================================
dnl Check for TLS/SSL and cryptographic implementation to use
dnl ===================================================================
AC_MSG_CHECKING([which TLS/SSL and cryptographic implementation to use])
if test -n "$with_tls"; then
    case $with_tls in
    openssl)
        AC_DEFINE(USE_TLS_OPENSSL)
        TLS=OPENSSL
        AC_MSG_RESULT([$TLS])

        if test "$enable_openssl" != "yes"; then
            AC_MSG_ERROR(["Disabling OpenSSL was requested, but the requested TLS to use is actually OpenSSL."])
        fi

        # warn that OpenSSL has been selected but not all TLS code has this option
        AC_MSG_WARN([TLS/SSL implementation to use is OpenSSL but some code may still depend on NSS or GNUTLS])
        add_warning "TLS/SSL implementation to use is OpenSSL but some code may still depend on NSS or GNUTLS"
        ;;
    nss)
        AC_DEFINE(USE_TLS_NSS)
        TLS=NSS
        AC_MSG_RESULT([$TLS])
        ;;
    no)
        AC_MSG_RESULT([none])
        AC_MSG_WARN([Skipping TLS/SSL])
        ;;
    *)
        AC_MSG_RESULT([])
        AC_MSG_ERROR([unsupported implementation $with_tls. Supported are:
openssl - OpenSSL
nss - Mozilla's Network Security Services (NSS)
    ])
        ;;
    esac
else
    # default to using NSS, it results in smaller oox lib
    AC_DEFINE(USE_TLS_NSS)
    TLS=NSS
    AC_MSG_RESULT([$TLS])
fi
AC_SUBST(TLS)

dnl ===================================================================
dnl Check for system sane
dnl ===================================================================
AC_MSG_CHECKING([which sane header to use])
if test "$with_system_sane" = "yes"; then
    AC_MSG_RESULT([external])
    AC_CHECK_HEADER(sane/sane.h, [],
      [AC_MSG_ERROR(sane not found. install sane)], [])
else
    AC_MSG_RESULT([internal])
    BUILD_TYPE="$BUILD_TYPE SANE"
fi

dnl ===================================================================
dnl Check for system icu
dnl ===================================================================
SYSTEM_GENBRK=
SYSTEM_GENCCODE=
SYSTEM_GENCMN=

ICU_MAJOR=70
ICU_MINOR=1
ICU_RECLASSIFIED_PREPEND_SET_EMPTY="TRUE"
ICU_RECLASSIFIED_CONDITIONAL_JAPANESE_STARTER="TRUE"
ICU_RECLASSIFIED_HEBREW_LETTER="TRUE"
AC_MSG_CHECKING([which icu to use])
if test "$with_system_icu" = "yes"; then
    AC_MSG_RESULT([external])
    SYSTEM_ICU=TRUE
    AC_LANG_PUSH([C++])
    AC_MSG_CHECKING([for unicode/rbbi.h])
    AC_PREPROC_IFELSE([AC_LANG_SOURCE([[unicode/rbbi.h]])],[AC_MSG_RESULT([yes])],[AC_MSG_ERROR([icu headers not found])])
    AC_LANG_POP([C++])

    if test "$cross_compiling" != "yes"; then
        PKG_CHECK_MODULES(ICU, icu-i18n >= 4.6)
        ICU_VERSION=`$PKG_CONFIG --modversion icu-i18n 2>/dev/null`
        ICU_MAJOR=`echo $ICU_VERSION | cut -d"." -f1`
        ICU_MINOR=`echo $ICU_VERSION | cut -d"." -f2`
    fi

    if test "$cross_compiling" = "yes" -a \( "$with_system_icu_for_build" = "yes" -o "$with_system_icu_for_build" = "force" \); then
        ICU_VERSION_FOR_BUILD=`$PKG_CONFIG --modversion icu-i18n 2>/dev/null`
        ICU_MAJOR_FOR_BUILD=`echo $ICU_VERSION_FOR_BUILD | cut -d"." -f1`
        ICU_MINOR_FOR_BUILD=`echo $ICU_VERSION_FOR_BUILD | cut -d"." -f2`
        AC_MSG_CHECKING([if MinGW and system versions of ICU are compatible])
        if test "$ICU_MAJOR" -eq "$ICU_MAJOR_FOR_BUILD" -a "$ICU_MINOR" -eq "$ICU_MINOR_FOR_BUILD"; then
            AC_MSG_RESULT([yes])
        else
            AC_MSG_RESULT([no])
            if test "$with_system_icu_for_build" != "force"; then
                AC_MSG_ERROR([System ICU is not version-compatible with MinGW ICU.
You can use --with-system-icu-for-build=force to use it anyway.])
            fi
        fi
    fi

    if test "$cross_compiling" != "yes" -o "$with_system_icu_for_build" = "yes" -o "$with_system_icu_for_build" = "force"; then
        # using the system icu tools can lead to version confusion, use the
        # ones from the build environment when cross-compiling
        AC_PATH_PROG(SYSTEM_GENBRK, genbrk, [], [$PATH:/usr/sbin:/sbin])
        if test -z "$SYSTEM_GENBRK"; then
            AC_MSG_ERROR([\'genbrk\' not found in \$PATH, install the icu development tool \'genbrk\'])
        fi
        AC_PATH_PROG(SYSTEM_GENCCODE, genccode, [], [$PATH:/usr/sbin:/sbin:/usr/local/sbin])
        if test -z "$SYSTEM_GENCCODE"; then
            AC_MSG_ERROR([\'genccode\' not found in \$PATH, install the icu development tool \'genccode\'])
        fi
        AC_PATH_PROG(SYSTEM_GENCMN, gencmn, [], [$PATH:/usr/sbin:/sbin:/usr/local/sbin])
        if test -z "$SYSTEM_GENCMN"; then
            AC_MSG_ERROR([\'gencmn\' not found in \$PATH, install the icu development tool \'gencmn\'])
        fi
        if test "$ICU_MAJOR" -ge "49"; then
            ICU_RECLASSIFIED_PREPEND_SET_EMPTY="TRUE"
            ICU_RECLASSIFIED_CONDITIONAL_JAPANESE_STARTER="TRUE"
            ICU_RECLASSIFIED_HEBREW_LETTER="TRUE"
        else
            ICU_RECLASSIFIED_PREPEND_SET_EMPTY=
            ICU_RECLASSIFIED_CONDITIONAL_JAPANESE_STARTER=
            ICU_RECLASSIFIED_HEBREW_LETTER=
        fi
    fi

    if test "$cross_compiling" = "yes"; then
        if test "$ICU_MAJOR" -ge "50"; then
            AC_MSG_RESULT([Ignore ICU_MINOR as obviously the libraries don't include the minor version in their names any more])
            ICU_MINOR=""
        fi
    fi
else
    AC_MSG_RESULT([internal])
    SYSTEM_ICU=
    BUILD_TYPE="$BUILD_TYPE ICU"
    # surprisingly set these only for "internal" (to be used by various other
    # external libs): the system icu-config is quite unhelpful and spits out
    # dozens of weird flags and also default path -I/usr/include
    ICU_CFLAGS="-I${WORKDIR}/UnpackedTarball/icu/source/i18n -I${WORKDIR}/UnpackedTarball/icu/source/common"
    ICU_LIBS="-L${WORKDIR}/UnpackedTarball/icu/source/lib"
fi
if test "$ICU_MAJOR" -ge "59"; then
    # As of ICU 59 it defaults to typedef char16_t UChar; which is available
    # with -std=c++11 but not all external libraries can be built with that,
    # for those use a bit-compatible typedef uint16_t UChar; see
    # icu/source/common/unicode/umachine.h
    ICU_UCHAR_TYPE="-DUCHAR_TYPE=uint16_t"
else
    ICU_UCHAR_TYPE=""
fi
AC_SUBST(SYSTEM_ICU)
AC_SUBST(SYSTEM_GENBRK)
AC_SUBST(SYSTEM_GENCCODE)
AC_SUBST(SYSTEM_GENCMN)
AC_SUBST(ICU_MAJOR)
AC_SUBST(ICU_MINOR)
AC_SUBST(ICU_RECLASSIFIED_PREPEND_SET_EMPTY)
AC_SUBST(ICU_RECLASSIFIED_CONDITIONAL_JAPANESE_STARTER)
AC_SUBST(ICU_RECLASSIFIED_HEBREW_LETTER)
AC_SUBST(ICU_CFLAGS)
AC_SUBST(ICU_LIBS)
AC_SUBST(ICU_UCHAR_TYPE)

dnl ==================================================================
dnl Breakpad
dnl ==================================================================
DEFAULT_CRASHDUMP_VALUE="true"
AC_MSG_CHECKING([whether to enable breakpad])
if test "$enable_breakpad" != yes; then
    AC_MSG_RESULT([no])
else
    AC_MSG_RESULT([yes])
    ENABLE_BREAKPAD="TRUE"
    AC_DEFINE(ENABLE_BREAKPAD)
    AC_DEFINE(HAVE_FEATURE_BREAKPAD, 1)
    BUILD_TYPE="$BUILD_TYPE BREAKPAD"

    AC_MSG_CHECKING([for disable crash dump])
    if test "$enable_crashdump" = no; then
        DEFAULT_CRASHDUMP_VALUE="false"
        AC_MSG_RESULT([yes])
    else
       AC_MSG_RESULT([no])
    fi

    AC_MSG_CHECKING([for crashreport config])
    if test "$with_symbol_config" = "no"; then
        BREAKPAD_SYMBOL_CONFIG="invalid"
        AC_MSG_RESULT([no])
    else
        BREAKPAD_SYMBOL_CONFIG="$with_symbol_config"
        AC_DEFINE(BREAKPAD_SYMBOL_CONFIG)
        AC_MSG_RESULT([yes])
    fi
    AC_SUBST(BREAKPAD_SYMBOL_CONFIG)
fi
AC_SUBST(ENABLE_BREAKPAD)
AC_SUBST(DEFAULT_CRASHDUMP_VALUE)

dnl ===================================================================
dnl Orcus
dnl ===================================================================
libo_CHECK_SYSTEM_MODULE([orcus],[ORCUS],[liborcus-0.17 >= 0.17.0])
if test "$with_system_orcus" != "yes"; then
    if test "$SYSTEM_BOOST" = "TRUE"; then
        dnl Link with Boost.System
        dnl This seems to be necessary since boost 1.50 (1.48 does not need it,
        dnl 1.49 is untested). The macro BOOST_THREAD_DONT_USE_SYSTEM mentioned
        dnl in documentation has no effect.
        AX_BOOST_SYSTEM
    fi
fi
dnl FIXME by renaming SYSTEM_LIBORCUS to SYSTEM_ORCUS in the build system world
SYSTEM_LIBORCUS=$SYSTEM_ORCUS
AC_SUBST([BOOST_SYSTEM_LIB])
AC_SUBST(SYSTEM_LIBORCUS)

dnl ===================================================================
dnl HarfBuzz
dnl ===================================================================
libo_CHECK_SYSTEM_MODULE([graphite],[GRAPHITE],[graphite2 >= 0.9.3],
                         ["-I${WORKDIR}/UnpackedTarball/graphite/include -DGRAPHITE2_STATIC"],
                         ["-L${WORKDIR}/LinkTarget/StaticLibrary -lgraphite"])

libo_CHECK_SYSTEM_MODULE([harfbuzz],[HARFBUZZ],[harfbuzz-icu >= 0.9.42],
                         ["-I${WORKDIR}/UnpackedTarball/harfbuzz/src"],
                         ["-L${WORKDIR}/UnpackedTarball/harfbuzz/src/.libs -lharfbuzz"])

if test "$COM" = "MSC"; then # override the above
    GRAPHITE_LIBS="${WORKDIR}/LinkTarget/StaticLibrary/graphite.lib"
    HARFBUZZ_LIBS="${WORKDIR}/UnpackedTarball/harfbuzz/src/.libs/libharfbuzz.lib"
fi

if test "$with_system_harfbuzz" = "yes"; then
    if test "$with_system_graphite" = "no"; then
        AC_MSG_ERROR([--with-system-graphite must be used when --with-system-harfbuzz is used])
    fi
    AC_MSG_CHECKING([whether system Harfbuzz is built with Graphite support])
    save_LIBS="$LIBS"
    save_CFLAGS="$CFLAGS"
    LIBS="$LIBS $HARFBUZZ_LIBS"
    CFLAGS="$CFLAGS $HARFBUZZ_CFLAGS"
    AC_CHECK_FUNC(hb_graphite2_face_get_gr_face,,[AC_MSG_ERROR([Harfbuzz needs to be built with Graphite support.])])
    LIBS="$save_LIBS"
    CFLAGS="$save_CFLAGS"
else
    if test "$with_system_graphite" = "yes"; then
        AC_MSG_ERROR([--without-system-graphite must be used when --without-system-harfbuzz is used])
    fi
fi

if test "$USING_X11" = TRUE; then
    AC_PATH_X
    AC_PATH_XTRA
    CPPFLAGS="$CPPFLAGS $X_CFLAGS"

    if test -z "$x_includes"; then
        x_includes="default_x_includes"
    fi
    if test -z "$x_libraries"; then
        x_libraries="default_x_libraries"
    fi
    CFLAGS="$CFLAGS $X_CFLAGS"
    LDFLAGS="$LDFLAGS $X_LDFLAGS $X_LIBS"
    AC_CHECK_LIB(X11, XOpenDisplay, x_libs="-lX11 $X_EXTRA_LIBS", [AC_MSG_ERROR([X Development libraries not found])])
else
    x_includes="no_x_includes"
    x_libraries="no_x_libraries"
fi

if test "$USING_X11" = TRUE; then
    dnl ===================================================================
    dnl Check for extension headers
    dnl ===================================================================
    AC_CHECK_HEADERS(X11/extensions/shape.h,[],[AC_MSG_ERROR([libXext headers not found])],
     [#include <X11/extensions/shape.h>])

    # vcl needs ICE and SM
    AC_CHECK_HEADERS(X11/ICE/ICElib.h,[],[AC_MSG_ERROR([libICE headers not found])])
    AC_CHECK_LIB([ICE], [IceConnectionNumber], [:],
        [AC_MSG_ERROR(ICE library not found)])
    AC_CHECK_HEADERS(X11/SM/SMlib.h,[],[AC_MSG_ERROR([libSM headers not found])])
    AC_CHECK_LIB([SM], [SmcOpenConnection], [:],
        [AC_MSG_ERROR(SM library not found)])
fi

if test "$USING_X11" = TRUE -a "$ENABLE_JAVA" != ""; then
    # bean/native/unix/com_sun_star_comp_beans_LocalOfficeWindow.c needs Xt
    AC_CHECK_HEADERS(X11/Intrinsic.h,[],[AC_MSG_ERROR([libXt headers not found])])
fi

dnl ===================================================================
dnl Check for system Xrender
dnl ===================================================================
AC_MSG_CHECKING([whether to use Xrender])
if test "$USING_X11" = TRUE -a  "$test_xrender" = "yes"; then
    AC_MSG_RESULT([yes])
    PKG_CHECK_MODULES(XRENDER, xrender)
    XRENDER_CFLAGS=$(printf '%s' "$XRENDER_CFLAGS" | sed -e "s/-I/${ISYSTEM?}/g")
    FilterLibs "${XRENDER_LIBS}"
    XRENDER_LIBS="${filteredlibs}"
    AC_CHECK_LIB([Xrender], [XRenderQueryVersion], [:],
      [AC_MSG_ERROR(libXrender not found or functional)], [])
    AC_CHECK_HEADER(X11/extensions/Xrender.h, [],
      [AC_MSG_ERROR(Xrender not found. install X)], [])
else
    AC_MSG_RESULT([no])
fi
AC_SUBST(XRENDER_CFLAGS)
AC_SUBST(XRENDER_LIBS)

dnl ===================================================================
dnl Check for XRandr
dnl ===================================================================
AC_MSG_CHECKING([whether to enable RandR support])
if test "$USING_X11" = TRUE -a "$test_randr" = "yes" -a \( "$enable_randr" = "yes" -o "$enable_randr" = "TRUE" \); then
    AC_MSG_RESULT([yes])
    PKG_CHECK_MODULES(XRANDR, xrandr >= 1.2, ENABLE_RANDR="TRUE", ENABLE_RANDR="")
    if test "$ENABLE_RANDR" != "TRUE"; then
        AC_CHECK_HEADER(X11/extensions/Xrandr.h, [],
                    [AC_MSG_ERROR([X11/extensions/Xrandr.h could not be found. X11 dev missing?])], [])
        XRANDR_CFLAGS=" "
        AC_CHECK_LIB([Xrandr], [XRRQueryExtension], [:],
          [ AC_MSG_ERROR(libXrandr not found or functional) ], [])
        XRANDR_LIBS="-lXrandr "
        ENABLE_RANDR="TRUE"
    fi
    XRANDR_CFLAGS=$(printf '%s' "$XRANDR_CFLAGS" | sed -e "s/-I/${ISYSTEM?}/g")
    FilterLibs "${XRANDR_LIBS}"
    XRANDR_LIBS="${filteredlibs}"
else
    ENABLE_RANDR=""
    AC_MSG_RESULT([no])
fi
AC_SUBST(XRANDR_CFLAGS)
AC_SUBST(XRANDR_LIBS)
AC_SUBST(ENABLE_RANDR)

if test "$test_webdav" = yes; then
    if test -z "$with_webdav"; then
        WITH_WEBDAV=curl
    else
        WITH_WEBDAV="$with_webdav"
    fi
fi

AC_MSG_CHECKING([for webdav library])
case "$WITH_WEBDAV" in
curl)
    AC_MSG_RESULT([curl])
    # curl is already mandatory (almost) and checked elsewhere
    if test "$enable_curl" = "no"; then
        AC_MSG_ERROR(["--with-webdav=curl conflicts with --disable-curl"])
    fi
    ;;
serf)
    AC_MSG_RESULT([serf])
    # Check for system apr-util
    libo_CHECK_SYSTEM_MODULE([apr],[APR],[apr-util-1],
                             ["-I${WORKDIR}/UnpackedTarball/apr/include -I${WORKDIR}/UnpackedTarball/apr_util/include"],
                             ["-L${WORKDIR}/UnpackedTarball/apr/.libs -lapr-1 -L${WORKDIR}/UnpackedTarball/apr_util/.libs -laprutil-1"])
    if test "$COM" = "MSC"; then
        APR_LIB_DIR="LibR"
        test -n "${MSVC_USE_DEBUG_RUNTIME}" && APR_LIB_DIR="LibD"
        APR_LIBS="${WORKDIR}/UnpackedTarball/apr/${APR_LIB_DIR}/apr-1.lib ${WORKDIR}/UnpackedTarball/apr_util/${APR_LIB_DIR}/aprutil-1.lib"
    fi

    # Check for system serf
    libo_CHECK_SYSTEM_MODULE([serf],[SERF],[serf-1 >= 1.3.9])
    ;;
neon)
    AC_MSG_RESULT([neon])
    # Check for system neon
    libo_CHECK_SYSTEM_MODULE([neon],[NEON],[neon >= 0.31.2])
    if test "$with_system_neon" = "yes"; then
        NEON_VERSION="`$PKG_CONFIG --modversion neon | $SED 's/\.//g'`"
    else
        NEON_VERSION=0312
    fi
    AC_SUBST(NEON_VERSION)
    ;;
*)
    AC_MSG_RESULT([none, disabled])
    WITH_WEBDAV=""
    ;;
esac
AC_SUBST(WITH_WEBDAV)

dnl ===================================================================
dnl Check for disabling cve_tests
dnl ===================================================================
AC_MSG_CHECKING([whether to execute CVE tests])
# If not explicitly enabled or disabled, default
if test -z "$enable_cve_tests"; then
    case "$OS" in
    WNT)
        # Default cves off for Windows with its wild and wonderful
        # variety of AV software kicking in and panicking
        enable_cve_tests=no
        ;;
    *)
        # otherwise yes
        enable_cve_tests=yes
        ;;
    esac
fi
if test "$enable_cve_tests" = "no"; then
    AC_MSG_RESULT([no])
    DISABLE_CVE_TESTS=TRUE
    AC_SUBST(DISABLE_CVE_TESTS)
else
    AC_MSG_RESULT([yes])
fi

dnl ===================================================================
dnl Check for enabling chart XShape tests
dnl ===================================================================
AC_MSG_CHECKING([whether to execute chart XShape tests])
if test "$enable_chart_tests" = "yes" -o '(' "$_os" = "WINNT" -a "$enable_chart_tests" != "no" ')'; then
    AC_MSG_RESULT([yes])
    ENABLE_CHART_TESTS=TRUE
    AC_SUBST(ENABLE_CHART_TESTS)
else
    AC_MSG_RESULT([no])
fi

dnl ===================================================================
dnl Check for system openssl
dnl ===================================================================
ENABLE_OPENSSL=
AC_MSG_CHECKING([whether to disable OpenSSL usage])
if test "$enable_openssl" = "yes"; then
    AC_MSG_RESULT([no])
    ENABLE_OPENSSL=TRUE
    if test "$_os" = Darwin ; then
        # OpenSSL is deprecated when building for 10.7 or later.
        #
        # http://stackoverflow.com/questions/7406946/why-is-apple-deprecating-openssl-in-macos-10-7-lion
        # http://stackoverflow.com/questions/7475914/libcrypto-deprecated-on-mac-os-x-10-7-lion

        with_system_openssl=no
        libo_CHECK_SYSTEM_MODULE([openssl],[OPENSSL],[openssl])
    elif test "$_os" = "FreeBSD" -o "$_os" = "NetBSD" -o "$_os" = "OpenBSD" -o "$_os" = "DragonFly" \
            && test "$with_system_openssl" != "no"; then
        with_system_openssl=yes
        SYSTEM_OPENSSL=TRUE
        OPENSSL_CFLAGS=
        OPENSSL_LIBS="-lssl -lcrypto"
    else
        libo_CHECK_SYSTEM_MODULE([openssl],[OPENSSL],[openssl])
    fi
    if test "$with_system_openssl" = "yes"; then
        AC_MSG_CHECKING([whether openssl supports SHA512])
        AC_LANG_PUSH([C])
        AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <openssl/sha.h>]],[[
            SHA512_CTX context;
]])],[AC_MSG_RESULT([yes])],[AC_MSG_ERROR([no, openssl too old. Need >= 0.9.8.])])
        AC_LANG_POP(C)
    fi
else
    AC_MSG_RESULT([yes])

    # warn that although OpenSSL is disabled, system libraries may depend on it
    AC_MSG_WARN([OpenSSL has been disabled. No code compiled here will make use of it but system libraries may create indirect dependencies])
    add_warning "OpenSSL has been disabled. No code compiled here will make use of it but system libraries may create indirect dependencies"
fi

AC_SUBST([ENABLE_OPENSSL])

if test "$enable_cipher_openssl_backend" = yes && test "$ENABLE_OPENSSL" != TRUE; then
    if test "$libo_fuzzed_enable_cipher_openssl_backend" = yes; then
        AC_MSG_NOTICE([Resetting --enable-cipher-openssl-backend=no])
        enable_cipher_openssl_backend=no
    else
        AC_MSG_ERROR([--enable-cipher-openssl-backend needs OpenSSL, but --disable-openssl was given.])
    fi
fi
AC_MSG_CHECKING([whether to enable the OpenSSL backend for rtl/cipher.h])
ENABLE_CIPHER_OPENSSL_BACKEND=
if test "$enable_cipher_openssl_backend" = yes; then
    AC_MSG_RESULT([yes])
    ENABLE_CIPHER_OPENSSL_BACKEND=TRUE
else
    AC_MSG_RESULT([no])
fi
AC_SUBST([ENABLE_CIPHER_OPENSSL_BACKEND])

dnl ===================================================================
dnl Select the crypto backends used by LO
dnl ===================================================================

if test "$build_crypto" = yes; then
    if test "$OS" = WNT; then
        BUILD_TYPE="$BUILD_TYPE CRYPTO_MSCAPI"
        AC_DEFINE([USE_CRYPTO_MSCAPI])
    elif test "$ENABLE_NSS" = TRUE; then
        BUILD_TYPE="$BUILD_TYPE CRYPTO_NSS"
        AC_DEFINE([USE_CRYPTO_NSS])
    fi
fi

dnl ===================================================================
dnl Check for building gnutls
dnl ===================================================================
AC_MSG_CHECKING([whether to use gnutls])
if test "$WITH_WEBDAV" = "neon" -a "$with_system_neon" = no -a "$enable_openssl" = "no"; then
    AC_MSG_RESULT([yes])
    AM_PATH_LIBGCRYPT()
    PKG_CHECK_MODULES(GNUTLS, [gnutls],,
        AC_MSG_ERROR([[Disabling OpenSSL was requested, but GNUTLS is not
                      available in the system to use as replacement.]]))
    FilterLibs "${LIBGCRYPT_LIBS}"
    LIBGCRYPT_LIBS="${filteredlibs}"
else
    AC_MSG_RESULT([no])
fi

AC_SUBST([LIBGCRYPT_CFLAGS])
AC_SUBST([LIBGCRYPT_LIBS])

dnl ===================================================================
dnl Check for system redland
dnl ===================================================================
dnl redland: versions before 1.0.8 write RDF/XML that is useless for ODF (@xml:base)
dnl raptor2: need at least 2.0.7 for CVE-2012-0037
libo_CHECK_SYSTEM_MODULE([redland],[REDLAND],[redland >= 1.0.8 raptor2 >= 2.0.7])
if test "$with_system_redland" = "yes"; then
    AC_CHECK_LIB([rdf], [librdf_world_set_raptor_init_handler], [:],
            [AC_MSG_ERROR(librdf too old. Need >= 1.0.16)], [])
else
    RAPTOR_MAJOR="0"
    RASQAL_MAJOR="3"
    REDLAND_MAJOR="0"
fi
AC_SUBST(RAPTOR_MAJOR)
AC_SUBST(RASQAL_MAJOR)
AC_SUBST(REDLAND_MAJOR)

dnl ===================================================================
dnl Check for system hunspell
dnl ===================================================================
AC_MSG_CHECKING([which libhunspell to use])
if test "$with_system_hunspell" = "yes"; then
    AC_MSG_RESULT([external])
    SYSTEM_HUNSPELL=TRUE
    AC_LANG_PUSH([C++])
    PKG_CHECK_MODULES(HUNSPELL, hunspell, HUNSPELL_PC="TRUE", HUNSPELL_PC="" )
    if test "$HUNSPELL_PC" != "TRUE"; then
        AC_CHECK_HEADER(hunspell.hxx, [],
            [
            AC_CHECK_HEADER(hunspell/hunspell.hxx, [ HUNSPELL_CFLAGS=-I/usr/include/hunspell ],
            [AC_MSG_ERROR(hunspell headers not found.)], [])
            ], [])
        AC_CHECK_LIB([hunspell], [main], [:],
           [ AC_MSG_ERROR(hunspell library not found.) ], [])
        HUNSPELL_LIBS=-lhunspell
    fi
    AC_LANG_POP([C++])
    HUNSPELL_CFLAGS=$(printf '%s' "$HUNSPELL_CFLAGS" | sed -e "s/-I/${ISYSTEM?}/g")
    FilterLibs "${HUNSPELL_LIBS}"
    HUNSPELL_LIBS="${filteredlibs}"
else
    AC_MSG_RESULT([internal])
    SYSTEM_HUNSPELL=
    HUNSPELL_CFLAGS="-I${WORKDIR}/UnpackedTarball/hunspell/src/hunspell"
    if test "$COM" = "MSC"; then
        HUNSPELL_LIBS="${WORKDIR}/LinkTarget/StaticLibrary/hunspell.lib"
    else
        HUNSPELL_LIBS="-L${WORKDIR}/UnpackedTarball/hunspell/src/hunspell/.libs -lhunspell-1.7"
    fi
    BUILD_TYPE="$BUILD_TYPE HUNSPELL"
fi
AC_SUBST(SYSTEM_HUNSPELL)
AC_SUBST(HUNSPELL_CFLAGS)
AC_SUBST(HUNSPELL_LIBS)

dnl ===================================================================
dnl Check for system zxing
dnl ===================================================================
AC_MSG_CHECKING([whether to use zxing])
if test "$enable_zxing" = "no"; then
    AC_MSG_RESULT([no])
    ENABLE_ZXING=
    SYSTEM_ZXING=
else
    AC_MSG_RESULT([yes])
    ENABLE_ZXING=TRUE
    AC_MSG_CHECKING([which libzxing to use])
    if test "$with_system_zxing" = "yes"; then
        AC_MSG_RESULT([external])
        SYSTEM_ZXING=TRUE
        AC_LANG_PUSH([C++])
        AC_CHECK_HEADER(ZXing/MultiFormatWriter.h, [],
            [AC_MSG_ERROR(zxing headers not found.)], [#include <stdexcept>])
        ZXING_CFLAGS=-I/usr/include/ZXing
        AC_CHECK_LIB([ZXing], [main], [ZXING_LIBS=-lZXing],
            [ AC_CHECK_LIB([ZXingCore], [main], [ZXING_LIBS=-lZXingCore],
            [ AC_MSG_ERROR(zxing C++ library not found.) ])], [])
        AC_LANG_POP([C++])
        ZXING_CFLAGS=$(printf '%s' "$ZXING_CFLAGS" | sed -e "s/-I/${ISYSTEM?}/g")
        FilterLibs "${ZXING_LIBS}"
        ZXING_LIBS="${filteredlibs}"
    else
        AC_MSG_RESULT([internal])
        SYSTEM_ZXING=
        BUILD_TYPE="$BUILD_TYPE ZXING"
    fi
    if test "$ENABLE_ZXING" = TRUE; then
        AC_DEFINE(ENABLE_ZXING)
    fi
fi
AC_SUBST(SYSTEM_ZXING)
AC_SUBST(ENABLE_ZXING)
AC_SUBST(ZXING_CFLAGS)
AC_SUBST(ZXING_LIBS)

dnl ===================================================================
dnl Check for system box2d
dnl ===================================================================
AC_MSG_CHECKING([which box2d to use])
if test "$with_system_box2d" = "yes"; then
    AC_MSG_RESULT([external])
    SYSTEM_BOX2D=TRUE
    AC_LANG_PUSH([C++])
    AC_CHECK_HEADER(box2d/box2d.h, [BOX2D_H_FOUND='TRUE'],
        [BOX2D_H_FOUND='FALSE'])
    if test "$BOX2D_H_FOUND" = "TRUE"; then # 2.4.0+
        _BOX2D_LIB=box2d
        AC_DEFINE(BOX2D_HEADER,<box2d/box2d.h>)
    else
        # fail this. there's no other alternative to check when we are here.
        AC_CHECK_HEADER([Box2D/Box2D.h], [],
            [AC_MSG_ERROR(box2d headers not found.)])
        _BOX2D_LIB=Box2D
        AC_DEFINE(BOX2D_HEADER,<Box2D/Box2D.h>)
    fi
    AC_CHECK_LIB([$_BOX2D_LIB], [main], [:],
        [ AC_MSG_ERROR(box2d library not found.) ], [])
    BOX2D_LIBS=-l$_BOX2D_LIB
    AC_LANG_POP([C++])
    BOX2D_CFLAGS=$(printf '%s' "$BOX2D_CFLAGS" | sed -e "s/-I/${ISYSTEM?}/g")
    FilterLibs "${BOX2D_LIBS}"
    BOX2D_LIBS="${filteredlibs}"
else
    AC_MSG_RESULT([internal])
    SYSTEM_BOX2D=
    BUILD_TYPE="$BUILD_TYPE BOX2D"
fi
AC_SUBST(SYSTEM_BOX2D)
AC_SUBST(BOX2D_CFLAGS)
AC_SUBST(BOX2D_LIBS)

dnl ===================================================================
dnl Checking for altlinuxhyph
dnl ===================================================================
AC_MSG_CHECKING([which altlinuxhyph to use])
if test "$with_system_altlinuxhyph" = "yes"; then
    AC_MSG_RESULT([external])
    SYSTEM_HYPH=TRUE
    AC_CHECK_HEADER(hyphen.h, [],
       [ AC_MSG_ERROR(altlinuxhyph headers not found.)], [])
    AC_CHECK_MEMBER(struct _HyphenDict.cset, [],
       [ AC_MSG_ERROR(no. You are sure you have altlinuyhyph headers?)],
       [#include <hyphen.h>])
    AC_CHECK_LIB(hyphen, hnj_hyphen_hyphenate2, [HYPHEN_LIB=-lhyphen],
        [ AC_MSG_ERROR(altlinuxhyph library not found or too old.)], [])
    if test -z "$HYPHEN_LIB"; then
        AC_CHECK_LIB(hyph, hnj_hyphen_hyphenate2, [HYPHEN_LIB=-lhyph],
           [ AC_MSG_ERROR(altlinuxhyph library not found or too old.)], [])
    fi
    if test -z "$HYPHEN_LIB"; then
        AC_CHECK_LIB(hnj, hnj_hyphen_hyphenate2, [HYPHEN_LIB=-lhnj],
           [ AC_MSG_ERROR(altlinuxhyph library not found or too old.)], [])
    fi
else
    AC_MSG_RESULT([internal])
    SYSTEM_HYPH=
    BUILD_TYPE="$BUILD_TYPE HYPHEN"
    if test "$COM" = "MSC"; then
        HYPHEN_LIB="${WORKDIR}/LinkTarget/StaticLibrary/hyphen.lib"
    else
        HYPHEN_LIB="-L${WORKDIR}/UnpackedTarball/hyphen/.libs -lhyphen"
    fi
fi
AC_SUBST(SYSTEM_HYPH)
AC_SUBST(HYPHEN_LIB)

dnl ===================================================================
dnl Checking for mythes
dnl ===================================================================
AC_MSG_CHECKING([which mythes to use])
if test "$with_system_mythes" = "yes"; then
    AC_MSG_RESULT([external])
    SYSTEM_MYTHES=TRUE
    AC_LANG_PUSH([C++])
    PKG_CHECK_MODULES(MYTHES, mythes, MYTHES_PKGCONFIG=yes, MYTHES_PKGCONFIG=no)
    if test "$MYTHES_PKGCONFIG" = "no"; then
        AC_CHECK_HEADER(mythes.hxx, [],
            [ AC_MSG_ERROR(mythes.hxx headers not found.)], [])
        AC_CHECK_LIB([mythes-1.2], [main], [:],
            [ MYTHES_FOUND=no], [])
    if test "$MYTHES_FOUND" = "no"; then
        AC_CHECK_LIB(mythes, main, [MYTHES_FOUND=yes],
                [ MYTHES_FOUND=no], [])
    fi
    if test "$MYTHES_FOUND" = "no"; then
        AC_MSG_ERROR([mythes library not found!.])
    fi
    fi
    AC_LANG_POP([C++])
    MYTHES_CFLAGS=$(printf '%s' "$MYTHES_CFLAGS" | sed -e "s/-I/${ISYSTEM?}/g")
    FilterLibs "${MYTHES_LIBS}"
    MYTHES_LIBS="${filteredlibs}"
else
    AC_MSG_RESULT([internal])
    SYSTEM_MYTHES=
    BUILD_TYPE="$BUILD_TYPE MYTHES"
    if test "$COM" = "MSC"; then
        MYTHES_LIBS="${WORKDIR}/LinkTarget/StaticLibrary/mythes.lib"
    else
        MYTHES_LIBS="-L${WORKDIR}/UnpackedTarball/mythes/.libs -lmythes-1.2"
    fi
fi
AC_SUBST(SYSTEM_MYTHES)
AC_SUBST(MYTHES_CFLAGS)
AC_SUBST(MYTHES_LIBS)

dnl ===================================================================
dnl How should we build the linear programming solver ?
dnl ===================================================================

ENABLE_COINMP=
AC_MSG_CHECKING([whether to build with CoinMP])
if test "$enable_coinmp" != "no"; then
    ENABLE_COINMP=TRUE
    AC_MSG_RESULT([yes])
    if test "$with_system_coinmp" = "yes"; then
        SYSTEM_COINMP=TRUE
        PKG_CHECK_MODULES(COINMP, coinmp coinutils)
        FilterLibs "${COINMP_LIBS}"
        COINMP_LIBS="${filteredlibs}"
    else
        BUILD_TYPE="$BUILD_TYPE COINMP"
    fi
else
    AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_COINMP)
AC_SUBST(SYSTEM_COINMP)
AC_SUBST(COINMP_CFLAGS)
AC_SUBST(COINMP_LIBS)

ENABLE_LPSOLVE=
AC_MSG_CHECKING([whether to build with lpsolve])
if test "$enable_lpsolve" != "no"; then
    ENABLE_LPSOLVE=TRUE
    AC_MSG_RESULT([yes])
else
    AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_LPSOLVE)

if test "$ENABLE_LPSOLVE" = TRUE; then
    AC_MSG_CHECKING([which lpsolve to use])
    if test "$with_system_lpsolve" = "yes"; then
        AC_MSG_RESULT([external])
        SYSTEM_LPSOLVE=TRUE
        AC_CHECK_HEADER(lpsolve/lp_lib.h, [],
           [ AC_MSG_ERROR(lpsolve headers not found.)], [])
        save_LIBS=$LIBS
        # some systems need this. Like Ubuntu...
        AC_CHECK_LIB(m, floor)
        AC_CHECK_LIB(dl, dlopen)
        AC_CHECK_LIB([lpsolve55], [make_lp], [:],
            [ AC_MSG_ERROR(lpsolve library not found or too old.)], [])
        LIBS=$save_LIBS
    else
        AC_MSG_RESULT([internal])
        SYSTEM_LPSOLVE=
        BUILD_TYPE="$BUILD_TYPE LPSOLVE"
    fi
fi
AC_SUBST(SYSTEM_LPSOLVE)

dnl ===================================================================
dnl Checking for libexttextcat
dnl ===================================================================
libo_CHECK_SYSTEM_MODULE([libexttextcat],[LIBEXTTEXTCAT],[libexttextcat >= 3.4.1])
if test "$with_system_libexttextcat" = "yes"; then
    SYSTEM_LIBEXTTEXTCAT_DATA=file://`$PKG_CONFIG --variable=pkgdatadir libexttextcat`
fi
AC_SUBST(SYSTEM_LIBEXTTEXTCAT_DATA)

dnl ===================================================================
dnl Checking for libnumbertext
dnl ===================================================================
libo_CHECK_SYSTEM_MODULE([libnumbertext],[LIBNUMBERTEXT],[libnumbertext >= 1.0.6])
if test "$with_system_libnumbertext" = "yes"; then
    SYSTEM_LIBNUMBERTEXT_DATA=file://`$PKG_CONFIG --variable=pkgdatadir libnumbertext`
    SYSTEM_LIBNUMBERTEXT=YES
else
    SYSTEM_LIBNUMBERTEXT=
    AC_LANG_PUSH([C++])
    save_CPPFLAGS=$CPPFLAGS
    CPPFLAGS="$CPPFLAGS $CXXFLAGS_CXX11"
    AC_CHECK_HEADERS([codecvt regex])
    AS_IF([test "x$ac_cv_header_codecvt" != xyes -o "x$ac_cv_header_regex" != xyes],
            [ LIBNUMBERTEXT_CFLAGS=''
              AC_MSG_WARN([No system-provided libnumbertext or codecvt/regex C++11 headers (min. libstdc++ 4.9).
                           Enable libnumbertext fallback (missing number to number name conversion).])
            ])
    CPPFLAGS=$save_CPPFLAGS
    AC_LANG_POP([C++])
fi
AC_SUBST(SYSTEM_LIBNUMBERTEXT)
AC_SUBST(SYSTEM_LIBNUMBERTEXT_DATA)
AC_SUBST(LIBNUMBERTEXT_CFLAGS)

dnl ***************************************
dnl testing libc version for Linux...
dnl ***************************************
if test "$_os" = "Linux"; then
    AC_MSG_CHECKING([whether the libc is recent enough])
    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
    #include <features.h>
    #if defined(__GNU_LIBRARY__) && (__GLIBC__ < 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ < 1))
    #error glibc >= 2.1 is required
    #endif
    ]])],, [AC_MSG_RESULT([yes])], [AC_MSG_ERROR([no, upgrade libc])])
fi

dnl =========================================
dnl Check for uuidgen
dnl =========================================
if test "$_os" = "WINNT"; then
    # we must use the uuidgen from the Windows SDK, which will be in the LO_PATH, but isn't in
    # the PATH for AC_PATH_PROG. It is already tested above in the WINDOWS_SDK_HOME check.
    UUIDGEN=uuidgen.exe
    AC_SUBST(UUIDGEN)
else
    AC_PATH_PROG([UUIDGEN], [uuidgen])
    if test -z "$UUIDGEN"; then
        AC_MSG_WARN([uuid is needed for building installation sets])
    fi
fi

dnl ***************************************
dnl Checking for bison and flex
dnl ***************************************
AC_PATH_PROG(BISON, bison)
if test -z "$BISON"; then
    AC_MSG_ERROR([no bison found in \$PATH, install it])
else
    AC_MSG_CHECKING([the bison version])
    _bison_version=`$BISON --version | grep GNU | $SED -e 's@^[[^0-9]]*@@' -e 's@ .*@@' -e 's@,.*@@'`
    _bison_longver=`echo $_bison_version | $AWK -F. '{ print \$1*1000+\$2}'`
    dnl Accept newer than 2.0; for --enable-compiler-plugins at least 2.3 is known to be bad and
    dnl cause
    dnl
    dnl   idlc/source/parser.y:222:15: error: externally available entity 'YYSTYPE' is not previously declared in an included file (if it is only used in this translation unit, put it in an unnamed namespace; otherwise, provide a declaration of it in an included file) [loplugin:external]
    dnl   typedef union YYSTYPE
    dnl           ~~~~~~^~~~~~~
    dnl
    dnl while at least 3.4.1 is know to be good:
    if test "$COMPILER_PLUGINS" = TRUE; then
        if test "$_bison_longver" -lt 2004; then
            AC_MSG_ERROR([failed ($BISON $_bison_version need 2.4+ for --enable-compiler-plugins)])
        fi
    else
        if test "$_bison_longver" -lt 2000; then
            AC_MSG_ERROR([failed ($BISON $_bison_version need 2.0+)])
        fi
    fi
fi
AC_SUBST([BISON])

AC_PATH_PROG(FLEX, flex)
if test "$GNUMAKE_WIN_NATIVE" = "TRUE" ; then
    FLEX=`cygpath -m $FLEX`
fi
if test -z "$FLEX"; then
    AC_MSG_ERROR([no flex found in \$PATH, install it])
else
    AC_MSG_CHECKING([the flex version])
    _flex_version=$($FLEX --version | $SED -e 's/^.*\([[[:digit:]]]\{1,\}\.[[[:digit:]]]\{1,\}\.[[[:digit:]]]\{1,\}\).*$/\1/')
    if test $(echo $_flex_version | $AWK -F. '{printf("%d%03d%03d", $1, $2, $3)}') -lt 2006000; then
        AC_MSG_ERROR([failed ($FLEX $_flex_version found, but need at least 2.6.0)])
    fi
fi
AC_SUBST([FLEX])
dnl ***************************************
dnl Checking for patch
dnl ***************************************
AC_PATH_PROG(PATCH, patch)
if test -z "$PATCH"; then
    AC_MSG_ERROR(["patch" not found in \$PATH, install it])
fi

dnl On Solaris or macOS, check if --with-gnu-patch was used
if test "$_os" = "SunOS" -o "$_os" = "Darwin"; then
    if test -z "$with_gnu_patch"; then
        GNUPATCH=$PATCH
    else
        if test -x "$with_gnu_patch"; then
            GNUPATCH=$with_gnu_patch
        else
            AC_MSG_ERROR([--with-gnu-patch did not point to an executable])
        fi
    fi

    AC_MSG_CHECKING([whether $GNUPATCH is GNU patch])
    if $GNUPATCH --version | grep "Free Software Foundation" >/dev/null 2>/dev/null; then
        AC_MSG_RESULT([yes])
    else
        AC_MSG_ERROR([no, GNU patch needed. install or specify with --with-gnu-patch=/path/to/it])
    fi
else
    GNUPATCH=$PATCH
fi

if test "$GNUMAKE_WIN_NATIVE" = "TRUE" ; then
    GNUPATCH=`cygpath -m $GNUPATCH`
fi

dnl We also need to check for --with-gnu-cp

if test -z "$with_gnu_cp"; then
    # check the place where the good stuff is hidden on Solaris...
    if test -x /usr/gnu/bin/cp; then
        GNUCP=/usr/gnu/bin/cp
    else
        AC_PATH_PROGS(GNUCP, gnucp cp)
    fi
    if test -z $GNUCP; then
        AC_MSG_ERROR([Neither gnucp nor cp found. Install GNU cp and/or specify --with-gnu-cp=/path/to/it])
    fi
else
    if test -x "$with_gnu_cp"; then
        GNUCP=$with_gnu_cp
    else
        AC_MSG_ERROR([--with-gnu-cp did not point to an executable])
    fi
fi

if test "$GNUMAKE_WIN_NATIVE" = "TRUE" ; then
    GNUCP=`cygpath -m $GNUCP`
fi

AC_MSG_CHECKING([whether $GNUCP is GNU cp from coreutils with preserve= support])
if $GNUCP --version 2>/dev/null | grep "coreutils" >/dev/null 2>/dev/null; then
    AC_MSG_RESULT([yes])
elif $GNUCP --version 2>/dev/null | grep "GNU fileutils" >/dev/null 2>/dev/null; then
    AC_MSG_RESULT([yes])
else
    case "$build_os" in
    darwin*|macos*|netbsd*|openbsd*|freebsd*|dragonfly*|aix*)
        x_GNUCP=[\#]
        GNUCP=''
        AC_MSG_RESULT([no gnucp found - using the system's cp command])
        ;;
    *)
        AC_MSG_ERROR([no, GNU cp needed. install or specify with --with-gnu-cp=/path/to/it])
        ;;
    esac
fi

AC_SUBST(GNUPATCH)
AC_SUBST(GNUCP)
AC_SUBST(x_GNUCP)

dnl ***************************************
dnl testing assembler path
dnl ***************************************
ML_EXE=""
if test "$_os" = "WINNT"; then
    case "$WIN_HOST_ARCH" in
    x86) assembler=ml.exe ;;
    x64) assembler=ml64.exe ;;
    arm64) assembler=armasm64.exe ;;
    esac

    AC_MSG_CHECKING([for the MSVC assembler ($assembler)])
    if test -f "$MSVC_HOST_PATH/$assembler"; then
        ML_EXE=`win_short_path_for_make "$MSVC_HOST_PATH/$assembler"`
        AC_MSG_RESULT([$ML_EXE])
    else
        AC_MSG_ERROR([not found in $MSVC_HOST_PATH])
    fi
fi

AC_SUBST(ML_EXE)

dnl ===================================================================
dnl We need zip and unzip
dnl ===================================================================
AC_PATH_PROG(ZIP, zip)
test -z "$ZIP" && AC_MSG_ERROR([zip is required])
if ! "$ZIP" --filesync < /dev/null 2>/dev/null > /dev/null; then
    AC_MSG_ERROR([Zip version 3.0 or newer is required to build, please install it and make sure it is the one found first in PATH],,)
fi

AC_PATH_PROG(UNZIP, unzip)
test -z "$UNZIP" && AC_MSG_ERROR([unzip is required])

dnl ===================================================================
dnl Zip must be a specific type for different build types.
dnl ===================================================================
if test $build_os = cygwin; then
    if test -n "`$ZIP -h | $GREP -i WinNT`"; then
        AC_MSG_ERROR([$ZIP is not the required Cygwin version of Info-ZIP's zip.exe.])
    fi
fi

dnl ===================================================================
dnl We need touch with -h option support.
dnl ===================================================================
AC_PATH_PROG(TOUCH, touch)
test -z "$TOUCH" && AC_MSG_ERROR([touch is required])
touch "$WARNINGS_FILE"
if ! "$TOUCH" -h "$WARNINGS_FILE" 2>/dev/null > /dev/null; then
    AC_MSG_ERROR([touch version with -h option support is required to build, please install it and make sure it is the one found first in PATH],,)
fi

dnl ===================================================================
dnl Check for system epoxy
dnl ===================================================================
libo_CHECK_SYSTEM_MODULE([epoxy], [EPOXY], [epoxy >= 1.2], ["-I${WORKDIR}/UnpackedTarball/epoxy/include"])

dnl ===================================================================
dnl Set vcl option: coordinate device in double or sal_Int32
dnl ===================================================================

dnl disabled for now, we don't want subtle differences between OSs
dnl AC_MSG_CHECKING([Type to use for Device Pixel coordinates])
dnl if test "$_os" = "Darwin" -o  $_os = iOS ; then
dnl     AC_DEFINE(VCL_FLOAT_DEVICE_PIXEL)
dnl     AC_MSG_RESULT([double])
dnl else
dnl     AC_MSG_RESULT([sal_Int32])
dnl fi

dnl ===================================================================
dnl Show which vclplugs will be built.
dnl ===================================================================
R=""
if test "$USING_X11" != TRUE; then
    enable_gtk3=no
fi

ENABLE_GTK3=""
if test "x$enable_gtk3" = "xyes"; then
    ENABLE_GTK3="TRUE"
    AC_DEFINE(ENABLE_GTK3)
    R="$R gtk3"
fi
AC_SUBST(ENABLE_GTK3)

ENABLE_GTK3_KDE5=""
if test "x$enable_gtk3_kde5" = "xyes"; then
    ENABLE_GTK3_KDE5="TRUE"
    AC_DEFINE(ENABLE_GTK3_KDE5)
    R="$R gtk3_kde5"
fi
AC_SUBST(ENABLE_GTK3_KDE5)

ENABLE_GTK4=""
if test "x$enable_gtk4" = "xyes"; then
    ENABLE_GTK4="TRUE"
    AC_DEFINE(ENABLE_GTK4)
    R="$R gtk4"
fi
AC_SUBST(ENABLE_GTK4)

ENABLE_QT5=""
if test "x$enable_qt5" = "xyes"; then
    ENABLE_QT5="TRUE"
    AC_DEFINE(ENABLE_QT5)
    R="$R qt5"
fi
AC_SUBST(ENABLE_QT5)

ENABLE_QT6=""
if test "x$enable_qt6" = "xyes"; then
    ENABLE_QT6="TRUE"
    AC_DEFINE(ENABLE_QT6)
    R="$R qt6"
fi
AC_SUBST(ENABLE_QT6)


ENABLE_KF5=""
if test "x$enable_kf5" = "xyes"; then
    ENABLE_KF5="TRUE"
    AC_DEFINE(ENABLE_KF5)
    R="$R kf5"
fi
AC_SUBST(ENABLE_KF5)

if test "x$USING_X11" = "xyes"; then
    R="$R gen"
fi

if test "$_os" = "WINNT"; then
    R="$R win"
elif test "$_os" = "Darwin"; then
    R="$R osx"
elif test "$_os" = "iOS"; then
    R="ios"
elif test "$_os" = Android; then
    R="android"
fi

build_vcl_plugins="$R"
if test -z "$build_vcl_plugins"; then
    build_vcl_plugins=" none"
fi
AC_MSG_NOTICE([VCLplugs to be built:${build_vcl_plugins}])
VCL_PLUGIN_INFO=$R
AC_SUBST([VCL_PLUGIN_INFO])

dnl ===================================================================
dnl Check for GTK libraries
dnl ===================================================================

GTK3_CFLAGS=""
GTK3_LIBS=""
if test "$test_gtk3" = yes -a "x$enable_gtk3" = "xyes" -o "x$enable_gtk3_kde5" = "xyes"; then
    if test "$with_system_cairo" = no; then
        add_warning 'Non-system cairo combined with gtk3 is assumed to cause trouble; proceed at your own risk.'
    fi
    : ${with_system_cairo:=yes}
    PKG_CHECK_MODULES(GTK3, gtk+-3.0 >= 3.20 gtk+-unix-print-3.0 gmodule-no-export-2.0 glib-2.0 >= 2.38 cairo)
    GTK3_CFLAGS=$(printf '%s' "$GTK3_CFLAGS" | sed -e "s/-I/${ISYSTEM?}/g")
    GTK3_CFLAGS="$GTK3_CFLAGS -DGDK_DISABLE_DEPRECATED -DGTK_DISABLE_DEPRECATED"
    FilterLibs "${GTK3_LIBS}"
    GTK3_LIBS="${filteredlibs}"

    dnl We require egl only for the gtk3 plugin. Otherwise we use glx.
    if test "$with_system_epoxy" != "yes"; then
        AC_CHECK_LIB(EGL, eglMakeCurrent, [:], AC_MSG_ERROR([libEGL required.]))
        AC_CHECK_HEADER(EGL/eglplatform.h, [],
                        [AC_MSG_ERROR(EGL headers not found. install mesa-libEGL-devel)], [])
    fi
fi
AC_SUBST(GTK3_LIBS)
AC_SUBST(GTK3_CFLAGS)

GTK4_CFLAGS=""
GTK4_LIBS=""
LIBADWAITA_CFLAGS=""
LIBADWAITA_LIBS=""
if test "$test_gtk4" = yes -a "x$enable_gtk4" = "xyes"; then
    if test "$with_system_cairo" = no; then
        add_warning 'Non-system cairo combined with gtk4 is assumed to cause trouble; proceed at your own risk.'
    fi
    : ${with_system_cairo:=yes}
    PKG_CHECK_MODULES(GTK4, gtk4 gmodule-no-export-2.0 glib-2.0 >= 2.38 cairo atk)
    GTK4_CFLAGS=$(printf '%s' "$GTK4_CFLAGS" | sed -e "s/-I/${ISYSTEM?}/g")
    GTK4_CFLAGS="$GTK4_CFLAGS -DGDK_DISABLE_DEPRECATED -DGTK_DISABLE_DEPRECATED"
    FilterLibs "${GTK4_LIBS}"
    GTK4_LIBS="${filteredlibs}"

    PKG_CHECK_MODULES(LIBADWAITA, libadwaita-1)
    LIBADWAITA_CFLAGS=$(printf '%s' "$LIBADWAITA_CFLAGS" | sed -e "s/-I/${ISYSTEM?}/g")
    # LIBADWAITA_CFLAGS="$LIBADWAITA_CFLAGS -DGDK_DISABLE_DEPRECATED -DGTK_DISABLE_DEPRECATED"
    FilterLibs "${LIBADWAITA_LIBS}"
    LIBADWAITA_LIBS="${filteredlibs}"

    dnl We require egl only for the gtk4 plugin. Otherwise we use glx.
    if test "$with_system_epoxy" != "yes"; then
        AC_CHECK_LIB(EGL, eglMakeCurrent, [:], AC_MSG_ERROR([libEGL required.]))
        AC_CHECK_HEADER(EGL/eglplatform.h, [],
                        [AC_MSG_ERROR(EGL headers not found. install mesa-libEGL-devel)], [])
    fi
fi
AC_SUBST(GTK4_LIBS)
AC_SUBST(GTK4_CFLAGS)
AC_SUBST(LIBADWAITA_LIBS)
AC_SUBST(LIBADWAITA_CFLAGS)

if test "$enable_introspection" = yes; then
    if test "$ENABLE_GTK3" = "TRUE" -o "$ENABLE_GTK3_KDE5" = "TRUE"; then
        GOBJECT_INTROSPECTION_REQUIRE(INTROSPECTION_REQUIRED_VERSION)
    else
        AC_MSG_ERROR([--enable-introspection requires --enable-gtk3])
    fi
fi

dnl ===================================================================
dnl check for dbus support
dnl ===================================================================
ENABLE_DBUS=""
DBUS_CFLAGS=""
DBUS_LIBS=""
DBUS_GLIB_CFLAGS=""
DBUS_GLIB_LIBS=""
DBUS_HAVE_GLIB=""

if test "$enable_dbus" = "no"; then
    test_dbus=no
fi

AC_MSG_CHECKING([whether to enable DBUS support])
if test "$test_dbus" = "yes"; then
    ENABLE_DBUS="TRUE"
    AC_MSG_RESULT([yes])
    PKG_CHECK_MODULES(DBUS, dbus-1 >= 0.60)
    AC_DEFINE(ENABLE_DBUS)
    DBUS_CFLAGS=$(printf '%s' "$DBUS_CFLAGS" | sed -e "s/-I/${ISYSTEM?}/g")
    FilterLibs "${DBUS_LIBS}"
    DBUS_LIBS="${filteredlibs}"

    # Glib is needed for BluetoothServer
    # Sets also DBUS_GLIB_CFLAGS/DBUS_GLIB_LIBS if successful.
    PKG_CHECK_MODULES(DBUS_GLIB,[glib-2.0 >= 2.4],
        [
            DBUS_HAVE_GLIB="TRUE"
            AC_DEFINE(DBUS_HAVE_GLIB,1)
        ],
        AC_MSG_WARN([[No Glib found, Bluetooth support will be disabled]])
    )
else
    AC_MSG_RESULT([no])
fi

AC_SUBST(ENABLE_DBUS)
AC_SUBST(DBUS_CFLAGS)
AC_SUBST(DBUS_LIBS)
AC_SUBST(DBUS_GLIB_CFLAGS)
AC_SUBST(DBUS_GLIB_LIBS)
AC_SUBST(DBUS_HAVE_GLIB)

AC_MSG_CHECKING([whether to enable Impress remote control])
if test -n "$enable_sdremote" -a "$enable_sdremote" != "no"; then
    AC_MSG_RESULT([yes])
    ENABLE_SDREMOTE=TRUE
    AC_MSG_CHECKING([whether to enable Bluetooth support in Impress remote control])

    if test $OS = MACOSX && test "$MACOSX_SDK_VERSION" -ge 101500; then
        # The Bluetooth code doesn't compile with macOS SDK 10.15
        if test "$enable_sdremote_bluetooth" = yes; then
            AC_MSG_ERROR([macOS SDK $macosx_sdk does not currently support --enable-sdremote-bluetooth])
        fi
        enable_sdremote_bluetooth=no
    fi
    # If not explicitly enabled or disabled, default
    if test -z "$enable_sdremote_bluetooth"; then
        case "$OS" in
        LINUX|MACOSX|WNT)
            # Default to yes for these
            enable_sdremote_bluetooth=yes
            ;;
        *)
            # otherwise no
            enable_sdremote_bluetooth=no
            ;;
        esac
    fi
    # $enable_sdremote_bluetooth is guaranteed non-empty now

    if test "$enable_sdremote_bluetooth" != "no"; then
        if test "$OS" = "LINUX"; then
            if test "$ENABLE_DBUS" = "TRUE" -a "$DBUS_HAVE_GLIB" = "TRUE"; then
                AC_MSG_RESULT([yes])
                ENABLE_SDREMOTE_BLUETOOTH=TRUE
                dnl ===================================================================
                dnl Check for system bluez
                dnl ===================================================================
                AC_MSG_CHECKING([which Bluetooth header to use])
                if test "$with_system_bluez" = "yes"; then
                    AC_MSG_RESULT([external])
                    AC_CHECK_HEADER(bluetooth/bluetooth.h, [],
                        [AC_MSG_ERROR(bluetooth.h not found. install bluez)], [])
                    SYSTEM_BLUEZ=TRUE
                else
                    AC_MSG_RESULT([internal])
                    SYSTEM_BLUEZ=
                fi
            else
                AC_MSG_RESULT([no, dbus disabled])
                ENABLE_SDREMOTE_BLUETOOTH=
                SYSTEM_BLUEZ=
            fi
        else
            AC_MSG_RESULT([yes])
            ENABLE_SDREMOTE_BLUETOOTH=TRUE
            SYSTEM_BLUEZ=
        fi
    else
        AC_MSG_RESULT([no])
        ENABLE_SDREMOTE_BLUETOOTH=
        SYSTEM_BLUEZ=
    fi
else
    ENABLE_SDREMOTE=
    SYSTEM_BLUEZ=
    AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_SDREMOTE)
AC_SUBST(ENABLE_SDREMOTE_BLUETOOTH)
AC_SUBST(SYSTEM_BLUEZ)

dnl ===================================================================
dnl Check whether to enable GIO support
dnl ===================================================================
if test "$ENABLE_GTK4" = "TRUE" -o "$ENABLE_GTK3" = "TRUE" -o "$ENABLE_GTK3_KDE5" = "TRUE"; then
    AC_MSG_CHECKING([whether to enable GIO support])
    if test "$_os" != "WINNT" -a "$_os" != "Darwin" -a "$enable_gio" = "yes"; then
        dnl Need at least 2.26 for the dbus support.
        PKG_CHECK_MODULES([GIO], [gio-2.0 >= 2.26],
                          [ENABLE_GIO="TRUE"], [ENABLE_GIO=""])
        if test "$ENABLE_GIO" = "TRUE"; then
            AC_DEFINE(ENABLE_GIO)
            GIO_CFLAGS=$(printf '%s' "$GIO_CFLAGS" | sed -e "s/-I/${ISYSTEM?}/g")
            FilterLibs "${GIO_LIBS}"
            GIO_LIBS="${filteredlibs}"
        fi
    else
        AC_MSG_RESULT([no])
    fi
fi
AC_SUBST(ENABLE_GIO)
AC_SUBST(GIO_CFLAGS)
AC_SUBST(GIO_LIBS)


dnl ===================================================================

SPLIT_APP_MODULES=""
if test "$enable_split_app_modules" = "yes"; then
    SPLIT_APP_MODULES="TRUE"
fi
AC_SUBST(SPLIT_APP_MODULES)

SPLIT_OPT_FEATURES=""
if test "$enable_split_opt_features" = "yes"; then
    SPLIT_OPT_FEATURES="TRUE"
fi
AC_SUBST(SPLIT_OPT_FEATURES)

dnl ===================================================================
dnl Check whether the GStreamer libraries are available.
dnl ===================================================================

ENABLE_GSTREAMER_1_0=""

if test "$test_gstreamer_1_0" = yes; then

    AC_MSG_CHECKING([whether to enable the GStreamer 1.0 avmedia backend])
    if test "$enable_avmedia" = yes -a "$enable_gstreamer_1_0" != no; then
        ENABLE_GSTREAMER_1_0="TRUE"
        AC_MSG_RESULT([yes])
        PKG_CHECK_MODULES( [GSTREAMER_1_0], [gstreamer-1.0 gstreamer-plugins-base-1.0 gstreamer-pbutils-1.0 gstreamer-video-1.0] )
        GSTREAMER_1_0_CFLAGS=$(printf '%s' "$GSTREAMER_1_0_CFLAGS" | sed -e "s/-I/${ISYSTEM?}/g")
        FilterLibs "${GSTREAMER_1_0_LIBS}"
        GSTREAMER_1_0_LIBS="${filteredlibs}"
        AC_DEFINE(ENABLE_GSTREAMER_1_0)
    else
        AC_MSG_RESULT([no])
    fi
fi
AC_SUBST(GSTREAMER_1_0_CFLAGS)
AC_SUBST(GSTREAMER_1_0_LIBS)
AC_SUBST(ENABLE_GSTREAMER_1_0)

ENABLE_OPENGL_TRANSITIONS=
ENABLE_OPENGL_CANVAS=
if test $_os = iOS -o $_os = Android -o "$ENABLE_FUZZERS" = "TRUE"; then
   : # disable
elif test "$_os" = "Darwin"; then
    # We use frameworks on macOS, no need for detail checks
    ENABLE_OPENGL_TRANSITIONS=TRUE
    AC_DEFINE(HAVE_FEATURE_OPENGL,1)
    ENABLE_OPENGL_CANVAS=TRUE
elif test $_os = WINNT; then
    ENABLE_OPENGL_TRANSITIONS=TRUE
    AC_DEFINE(HAVE_FEATURE_OPENGL,1)
    ENABLE_OPENGL_CANVAS=TRUE
else
    if test "$USING_X11" = TRUE; then
        AC_CHECK_LIB(GL, glBegin, [:], AC_MSG_ERROR([libGL required.]))
        ENABLE_OPENGL_TRANSITIONS=TRUE
        AC_DEFINE(HAVE_FEATURE_OPENGL,1)
        ENABLE_OPENGL_CANVAS=TRUE
    fi
fi

AC_SUBST(ENABLE_OPENGL_TRANSITIONS)
AC_SUBST(ENABLE_OPENGL_CANVAS)

dnl =================================================
dnl Check whether to build with OpenCL support.
dnl =================================================

if test $_os != iOS -a $_os != Android -a "$ENABLE_FUZZERS" != "TRUE" -a "$enable_opencl" = "yes"; then
    # OPENCL in BUILD_TYPE and HAVE_FEATURE_OPENCL tell that OpenCL is potentially available on the
    # platform (optional at run-time, used through clew).
    BUILD_TYPE="$BUILD_TYPE OPENCL"
    AC_DEFINE(HAVE_FEATURE_OPENCL)
fi

dnl =================================================
dnl Check whether to build with dconf support.
dnl =================================================

if test $_os != Android -a $_os != iOS -a "$enable_dconf" != no; then
    PKG_CHECK_MODULES([DCONF], [dconf >= 0.15.2], [], [
        if test "$enable_dconf" = yes; then
            AC_MSG_ERROR([dconf not found])
        else
            enable_dconf=no
        fi])
fi
AC_MSG_CHECKING([whether to enable dconf])
if test $_os = Android -o $_os = iOS -o "$enable_dconf" = no; then
    DCONF_CFLAGS=
    DCONF_LIBS=
    ENABLE_DCONF=
    AC_MSG_RESULT([no])
else
    ENABLE_DCONF=TRUE
    AC_DEFINE(ENABLE_DCONF)
    AC_MSG_RESULT([yes])
fi
AC_SUBST([DCONF_CFLAGS])
AC_SUBST([DCONF_LIBS])
AC_SUBST([ENABLE_DCONF])

# pdf import?
AC_MSG_CHECKING([whether to build the PDF import feature])
ENABLE_PDFIMPORT=
if test -z "$enable_pdfimport" -o "$enable_pdfimport" = yes; then
    AC_MSG_RESULT([yes])
    ENABLE_PDFIMPORT=TRUE
    AC_DEFINE(HAVE_FEATURE_PDFIMPORT)
else
    AC_MSG_RESULT([no])
fi

# Pdfium?
AC_MSG_CHECKING([whether to build PDFium])
ENABLE_PDFIUM=
if test \( -z "$enable_pdfium" -a "$ENABLE_PDFIMPORT" = "TRUE" \) -o "$enable_pdfium" = yes; then
    AC_MSG_RESULT([yes])
    ENABLE_PDFIUM=TRUE
    BUILD_TYPE="$BUILD_TYPE PDFIUM"
else
    AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_PDFIUM)

if test "$ENABLE_PDFIUM" = "TRUE"; then
    AC_MSG_CHECKING([which OpenJPEG library to use])
    if test "$with_system_openjpeg" = "yes"; then
        SYSTEM_OPENJPEG2=TRUE
        AC_MSG_RESULT([external])
        PKG_CHECK_MODULES( OPENJPEG2, libopenjp2 )
        OPENJPEG2_CFLAGS=$(printf '%s' "$OPENJPEG2_CFLAGS" | sed -e "s/-I/${ISYSTEM?}/g")
        FilterLibs "${OPENJPEG2_LIBS}"
        OPENJPEG2_LIBS="${filteredlibs}"
    else
        SYSTEM_OPENJPEG2=FALSE
        AC_MSG_RESULT([internal])
    fi

    AC_MSG_CHECKING([which Abseil library to use])
    if test "$with_system_abseil" = "yes"; then
        AC_MSG_RESULT([external])
        SYSTEM_ABSEIL=TRUE
        AC_LANG_PUSH([C++])
        AC_CHECK_HEADER(absl/types/bad_optional_access.h, [],
                        [AC_MSG_ERROR(abseil headers not found.)], [])
        AC_CHECK_LIB([absl_bad_optional_access], [main], [ABSEIL_LIBS=-labsl_bad_optional_access],
                     [AC_MSG_ERROR([libabsl_bad_optional_access library not found.])])
        AC_LANG_POP([C++])
        ABSEIL_CFLAGS=$(printf '%s' "$ABSEIL_CFLAGS" | sed -e "s/-I/${ISYSTEM?}/g")
        FilterLibs "${ABSEIL_LIBS}"
        ABSEIL_LIBS="${filteredlibs}"
    else
        AC_MSG_RESULT([internal])
    fi
fi
AC_SUBST(SYSTEM_OPENJPEG2)
AC_SUBST(SYSTEM_ABSEIL)
AC_SUBST(ABSEIL_CFLAGS)
AC_SUBST(ABSEIL_LIBS)

dnl ===================================================================
dnl Check for poppler
dnl ===================================================================
ENABLE_POPPLER=
AC_MSG_CHECKING([whether to build Poppler])
if test \( -z "$enable_poppler" -a "$ENABLE_PDFIMPORT" = "TRUE" -a $_os != Android \) -o "$enable_poppler" = yes; then
    AC_MSG_RESULT([yes])
    ENABLE_POPPLER=TRUE
    AC_DEFINE(HAVE_FEATURE_POPPLER)
else
    AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_POPPLER)

if test "$ENABLE_PDFIMPORT" = "TRUE" -a "$ENABLE_POPPLER" != "TRUE" -a "$ENABLE_PDFIUM" != "TRUE"; then
    AC_MSG_ERROR([Cannot import PDF without either Pdfium or Poppler; please enable either of them.])
fi

if test "$ENABLE_PDFIMPORT" != "TRUE" -a \( "$ENABLE_POPPLER" = "TRUE" -o "$ENABLE_PDFIUM" = "TRUE" \); then
    AC_MSG_ERROR([Cannot enable Pdfium or Poppler when PDF importing is disabled; please enable PDF import first.])
fi

if test "$ENABLE_PDFIMPORT" = "TRUE" -a "$ENABLE_POPPLER" = "TRUE"; then
    dnl ===================================================================
    dnl Check for system poppler
    dnl ===================================================================
    AC_MSG_CHECKING([which PDF import poppler to use])
    if test "$with_system_poppler" = "yes"; then
        AC_MSG_RESULT([external])
        SYSTEM_POPPLER=TRUE
        PKG_CHECK_MODULES(POPPLER,[poppler >= 0.14 poppler-cpp])
        POPPLER_CFLAGS=$(printf '%s' "$POPPLER_CFLAGS" | sed -e "s/-I/${ISYSTEM?}/g")
        FilterLibs "${POPPLER_LIBS}"
        POPPLER_LIBS="${filteredlibs}"
    else
        AC_MSG_RESULT([internal])
        SYSTEM_POPPLER=
        BUILD_TYPE="$BUILD_TYPE POPPLER"
    fi
    AC_DEFINE([ENABLE_PDFIMPORT],1)
fi
AC_SUBST(ENABLE_PDFIMPORT)
AC_SUBST(SYSTEM_POPPLER)
AC_SUBST(POPPLER_CFLAGS)
AC_SUBST(POPPLER_LIBS)

# Skia?
ENABLE_SKIA=
if test "$enable_skia" != "no" -a "$build_skia" = "yes" -a -z "$DISABLE_GUI"; then
    # Skia now requires at least freetype2 >= 2.8.1, which is less that what LO requires as system freetype.
    if test "$SYSTEM_FREETYPE" = TRUE; then
        PKG_CHECK_EXISTS(freetype2 >= 21.0.15, # 21.0.15 = 2.8.1
            [skia_freetype_ok=yes],
            [skia_freetype_ok=no])
    else # internal is ok
        skia_freetype_ok=yes
    fi
    AC_MSG_CHECKING([whether to build Skia])
    if test "$skia_freetype_ok" = "yes"; then
        if test "$enable_skia" = "debug"; then
            AC_MSG_RESULT([yes (debug)])
            ENABLE_SKIA_DEBUG=TRUE
        else
            AC_MSG_RESULT([yes])
            ENABLE_SKIA_DEBUG=
        fi
        ENABLE_SKIA=TRUE
        AC_DEFINE(HAVE_FEATURE_SKIA)
        BUILD_TYPE="$BUILD_TYPE SKIA"

        if test "$OS" = "MACOSX"; then
            AC_DEFINE(SK_SUPPORT_GPU,1)
            AC_DEFINE(SK_METAL,1)
            SKIA_GPU=METAL
            AC_SUBST(SKIA_GPU)
        else
            AC_DEFINE(SK_SUPPORT_GPU,1)
            AC_DEFINE(SK_VULKAN,1)
            SKIA_GPU=VULKAN
            AC_SUBST(SKIA_GPU)
        fi

        if test -n "$MAC_OS_X_VERSION_MIN_REQUIRED" && test "$MAC_OS_X_VERSION_MIN_REQUIRED" -lt "101200"; then
            SKIA_DISABLE_VMA_USE_STL_SHARED_MUTEX=1
            AC_SUBST(SKIA_DISABLE_VMA_USE_STL_SHARED_MUTEX)
        fi
    else
        AC_MSG_RESULT([no (freetype too old)])
        add_warning "freetype version is too old for Skia library, at least 2.8.1 required, Skia support disabled"
    fi

else
    AC_MSG_CHECKING([whether to build Skia])
    AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_SKIA)
AC_SUBST(ENABLE_SKIA_DEBUG)

LO_CLANG_CXXFLAGS_INTRINSICS_SSE2=
LO_CLANG_CXXFLAGS_INTRINSICS_SSSE3=
LO_CLANG_CXXFLAGS_INTRINSICS_SSE41=
LO_CLANG_CXXFLAGS_INTRINSICS_SSE42=
LO_CLANG_CXXFLAGS_INTRINSICS_AVX=
LO_CLANG_CXXFLAGS_INTRINSICS_AVX2=
LO_CLANG_CXXFLAGS_INTRINSICS_AVX512=
LO_CLANG_CXXFLAGS_INTRINSICS_AVX512F=
LO_CLANG_CXXFLAGS_INTRINSICS_F16C=
LO_CLANG_CXXFLAGS_INTRINSICS_FMA=
HAVE_LO_CLANG_DLLEXPORTINLINES=

if test "$ENABLE_SKIA" = TRUE -a "$COM_IS_CLANG" != TRUE; then
    if test -n "$LO_CLANG_CC" -a -n "$LO_CLANG_CXX"; then
        AC_MSG_CHECKING([for Clang])
        AC_MSG_RESULT([$LO_CLANG_CC / $LO_CLANG_CXX])
    else
        if test "$_os" = "WINNT"; then
            AC_MSG_CHECKING([for clang-cl])
            if test -x "$VC_PRODUCT_DIR/Tools/Llvm/bin/clang-cl.exe"; then
                LO_CLANG_CC=`win_short_path_for_make "$VC_PRODUCT_DIR/Tools/Llvm/bin/clang-cl.exe"`
            elif test -n "$PROGRAMFILES" -a -x "$PROGRAMFILES/LLVM/bin/clang-cl.exe"; then
                LO_CLANG_CC=`win_short_path_for_make "$PROGRAMFILES/LLVM/bin/clang-cl.exe"`
            elif test -x "c:/Program Files/LLVM/bin/clang-cl.exe"; then
                LO_CLANG_CC=`win_short_path_for_make "c:/Program Files/LLVM/bin/clang-cl.exe"`
            fi
            if test -n "$LO_CLANG_CC"; then
                dnl explicitly set -m32/-m64
                LO_CLANG_CC="$LO_CLANG_CC -m$WIN_HOST_BITS"
                LO_CLANG_CXX="$LO_CLANG_CC"
                AC_MSG_RESULT([$LO_CLANG_CC])
            else
                AC_MSG_RESULT([no])
            fi
        else
            AC_CHECK_PROG(LO_CLANG_CC,clang,clang,[])
            AC_CHECK_PROG(LO_CLANG_CXX,clang++,clang++,[])
        fi
    fi
    if test -n "$LO_CLANG_CC" -a -n "$LO_CLANG_CXX"; then
        clang2_version=`echo __clang_major__.__clang_minor__.__clang_patchlevel__ | $LO_CLANG_CC -E - | tail -1 | sed 's/ //g'`
        clang2_ver=`echo "$clang2_version" | $AWK -F. '{ print \$1*10000+(\$2<100?\$2:99)*100+(\$3<100?\$3:99) }'`
        if test "$clang2_ver" -lt 50002; then
            AC_MSG_WARN(["$clang2_version" is too old or unrecognized, must be at least Clang 5.0.2])
            LO_CLANG_CC=
            LO_CLANG_CXX=
        fi
    fi
    if test -n "$LO_CLANG_CC" -a -n "$LO_CLANG_CXX" -a "$_os" = "WINNT"; then
        save_CXX="$CXX"
        CXX="$LO_CLANG_CXX"
        AC_MSG_CHECKING([whether $CXX supports -Zc:dllexportInlines-])
        AC_LANG_PUSH([C++])
        save_CXXFLAGS=$CXXFLAGS
        CXXFLAGS="$CXXFLAGS -Werror -Zc:dllexportInlines-"
        AC_COMPILE_IFELSE([AC_LANG_SOURCE()], [
                HAVE_LO_CLANG_DLLEXPORTINLINES=TRUE
                AC_MSG_RESULT([yes])
            ], [AC_MSG_RESULT([no])])
        CXXFLAGS=$save_CXXFLAGS
        AC_LANG_POP([C++])
        CXX="$save_CXX"
        if test -z "$HAVE_LO_CLANG_DLLEXPORTINLINES"; then
            AC_MSG_ERROR([Clang compiler does not support -Zc:dllexportInlines-. The Skia library needs to be built using a newer Clang version, or use --disable-skia.])
        fi
    fi
    if test -z "$LO_CLANG_CC" -o -z "$LO_CLANG_CXX"; then
        # Skia is the default on Windows and Mac, so hard-require Clang.
        # Elsewhere it's used just by the 'gen' VCL backend which is rarely used.
        if test "$_os" = "WINNT" -o "$_os" = "Darwin"; then
            AC_MSG_ERROR([Clang compiler not found. The Skia library needs to be built using Clang, or use --disable-skia.])
        else
            AC_MSG_WARN([Clang compiler not found.])
        fi
    else

        save_CXX="$CXX"
        CXX="$LO_CLANG_CXX"
        # copy&paste (and adjust) of intrinsics checks, since MSVC's -arch doesn't work well for Clang-cl
        flag_sse2=-msse2
        flag_ssse3=-mssse3
        flag_sse41=-msse4.1
        flag_sse42=-msse4.2
        flag_avx=-mavx
        flag_avx2=-mavx2
        flag_avx512="-mavx512f -mavx512vl -mavx512bw -mavx512dq -mavx512cd"
        flag_avx512f=-mavx512f
        flag_f16c=-mf16c
        flag_fma=-mfma

        AC_MSG_CHECKING([whether $CXX can compile SSE2 intrinsics])
        AC_LANG_PUSH([C++])
        save_CXXFLAGS=$CXXFLAGS
        CXXFLAGS="$CXXFLAGS $flag_sse2"
        AC_COMPILE_IFELSE([AC_LANG_SOURCE([
            #include <emmintrin.h>
            int main () {
                __m128i a = _mm_set1_epi32 (0), b = _mm_set1_epi32 (0), c;
                c = _mm_xor_si128 (a, b);
                return 0;
            }
            ])],
            [can_compile_sse2=yes],
            [can_compile_sse2=no])
        AC_LANG_POP([C++])
        CXXFLAGS=$save_CXXFLAGS
        AC_MSG_RESULT([${can_compile_sse2}])
        if test "${can_compile_sse2}" = "yes" ; then
            LO_CLANG_CXXFLAGS_INTRINSICS_SSE2="$flag_sse2"
        fi

        AC_MSG_CHECKING([whether $CXX can compile SSSE3 intrinsics])
        AC_LANG_PUSH([C++])
        save_CXXFLAGS=$CXXFLAGS
        CXXFLAGS="$CXXFLAGS $flag_ssse3"
        AC_COMPILE_IFELSE([AC_LANG_SOURCE([
            #include <tmmintrin.h>
            int main () {
                __m128i a = _mm_set1_epi32 (0), b = _mm_set1_epi32 (0), c;
                c = _mm_maddubs_epi16 (a, b);
                return 0;
            }
            ])],
            [can_compile_ssse3=yes],
            [can_compile_ssse3=no])
        AC_LANG_POP([C++])
        CXXFLAGS=$save_CXXFLAGS
        AC_MSG_RESULT([${can_compile_ssse3}])
        if test "${can_compile_ssse3}" = "yes" ; then
            LO_CLANG_CXXFLAGS_INTRINSICS_SSSE3="$flag_ssse3"
        fi

        AC_MSG_CHECKING([whether $CXX can compile SSE4.1 intrinsics])
        AC_LANG_PUSH([C++])
        save_CXXFLAGS=$CXXFLAGS
        CXXFLAGS="$CXXFLAGS $flag_sse41"
        AC_COMPILE_IFELSE([AC_LANG_SOURCE([
            #include <smmintrin.h>
            int main () {
                __m128i a = _mm_set1_epi32 (0), b = _mm_set1_epi32 (0), c;
                c = _mm_cmpeq_epi64 (a, b);
                return 0;
            }
            ])],
            [can_compile_sse41=yes],
            [can_compile_sse41=no])
        AC_LANG_POP([C++])
        CXXFLAGS=$save_CXXFLAGS
        AC_MSG_RESULT([${can_compile_sse41}])
        if test "${can_compile_sse41}" = "yes" ; then
            LO_CLANG_CXXFLAGS_INTRINSICS_SSE41="$flag_sse41"
        fi

        AC_MSG_CHECKING([whether $CXX can compile SSE4.2 intrinsics])
        AC_LANG_PUSH([C++])
        save_CXXFLAGS=$CXXFLAGS
        CXXFLAGS="$CXXFLAGS $flag_sse42"
        AC_COMPILE_IFELSE([AC_LANG_SOURCE([
            #include <nmmintrin.h>
            int main () {
                __m128i a = _mm_set1_epi32 (0), b = _mm_set1_epi32 (0), c;
                c = _mm_cmpgt_epi64 (a, b);
                return 0;
            }
            ])],
            [can_compile_sse42=yes],
            [can_compile_sse42=no])
        AC_LANG_POP([C++])
        CXXFLAGS=$save_CXXFLAGS
        AC_MSG_RESULT([${can_compile_sse42}])
        if test "${can_compile_sse42}" = "yes" ; then
            LO_CLANG_CXXFLAGS_INTRINSICS_SSE42="$flag_sse42"
        fi

        AC_MSG_CHECKING([whether $CXX can compile AVX intrinsics])
        AC_LANG_PUSH([C++])
        save_CXXFLAGS=$CXXFLAGS
        CXXFLAGS="$CXXFLAGS $flag_avx"
        AC_COMPILE_IFELSE([AC_LANG_SOURCE([
            #include <immintrin.h>
            int main () {
                __m256 a = _mm256_set1_ps (0.0f), b = _mm256_set1_ps (0.0f), c;
                c = _mm256_xor_ps(a, b);
                return 0;
            }
            ])],
            [can_compile_avx=yes],
            [can_compile_avx=no])
        AC_LANG_POP([C++])
        CXXFLAGS=$save_CXXFLAGS
        AC_MSG_RESULT([${can_compile_avx}])
        if test "${can_compile_avx}" = "yes" ; then
            LO_CLANG_CXXFLAGS_INTRINSICS_AVX="$flag_avx"
        fi

        AC_MSG_CHECKING([whether $CXX can compile AVX2 intrinsics])
        AC_LANG_PUSH([C++])
        save_CXXFLAGS=$CXXFLAGS
        CXXFLAGS="$CXXFLAGS $flag_avx2"
        AC_COMPILE_IFELSE([AC_LANG_SOURCE([
            #include <immintrin.h>
            int main () {
                __m256i a = _mm256_set1_epi32 (0), b = _mm256_set1_epi32 (0), c;
                c = _mm256_maddubs_epi16(a, b);
                return 0;
            }
            ])],
            [can_compile_avx2=yes],
            [can_compile_avx2=no])
        AC_LANG_POP([C++])
        CXXFLAGS=$save_CXXFLAGS
        AC_MSG_RESULT([${can_compile_avx2}])
        if test "${can_compile_avx2}" = "yes" ; then
            LO_CLANG_CXXFLAGS_INTRINSICS_AVX2="$flag_avx2"
        fi

        AC_MSG_CHECKING([whether $CXX can compile AVX512 intrinsics])
        AC_LANG_PUSH([C++])
        save_CXXFLAGS=$CXXFLAGS
        CXXFLAGS="$CXXFLAGS $flag_avx512"
        AC_COMPILE_IFELSE([AC_LANG_SOURCE([
            #include <immintrin.h>
            int main () {
                __m512i a = _mm512_loadu_si512(0);
                __m512d v1 = _mm512_load_pd(0);
                // https://gcc.gnu.org/git/?p=gcc.git;a=commit;f=gcc/config/i386/avx512fintrin.h;h=23bce99cbe7016a04e14c2163ed3fe6a5a64f4e2
                __m512d v2 = _mm512_abs_pd(v1);
                return 0;
            }
            ])],
            [can_compile_avx512=yes],
            [can_compile_avx512=no])
        AC_LANG_POP([C++])
        CXXFLAGS=$save_CXXFLAGS
        AC_MSG_RESULT([${can_compile_avx512}])
        if test "${can_compile_avx512}" = "yes" ; then
            LO_CLANG_CXXFLAGS_INTRINSICS_AVX512="$flag_avx512"
            LO_CLANG_CXXFLAGS_INTRINSICS_AVX512F="$flag_avx512f"
        fi

        AC_MSG_CHECKING([whether $CXX can compile F16C intrinsics])
        AC_LANG_PUSH([C++])
        save_CXXFLAGS=$CXXFLAGS
        CXXFLAGS="$CXXFLAGS $flag_f16c"
        AC_COMPILE_IFELSE([AC_LANG_SOURCE([
            #include <immintrin.h>
            int main () {
                __m128i a = _mm_set1_epi32 (0);
                __m128 c;
                c = _mm_cvtph_ps(a);
                return 0;
            }
            ])],
            [can_compile_f16c=yes],
            [can_compile_f16c=no])
        AC_LANG_POP([C++])
        CXXFLAGS=$save_CXXFLAGS
        AC_MSG_RESULT([${can_compile_f16c}])
        if test "${can_compile_f16c}" = "yes" ; then
            LO_CLANG_CXXFLAGS_INTRINSICS_F16C="$flag_f16c"
        fi

        AC_MSG_CHECKING([whether $CXX can compile FMA intrinsics])
        AC_LANG_PUSH([C++])
        save_CXXFLAGS=$CXXFLAGS
        CXXFLAGS="$CXXFLAGS $flag_fma"
        AC_COMPILE_IFELSE([AC_LANG_SOURCE([
            #include <immintrin.h>
            int main () {
                __m256 a = _mm256_set1_ps (0.0f), b = _mm256_set1_ps (0.0f), c = _mm256_set1_ps (0.0f), d;
                d = _mm256_fmadd_ps(a, b, c);
                return 0;
            }
            ])],
            [can_compile_fma=yes],
            [can_compile_fma=no])
        AC_LANG_POP([C++])
        CXXFLAGS=$save_CXXFLAGS
        AC_MSG_RESULT([${can_compile_fma}])
        if test "${can_compile_fma}" = "yes" ; then
            LO_CLANG_CXXFLAGS_INTRINSICS_FMA="$flag_fma"
        fi

        CXX="$save_CXX"
    fi
fi
#
# prefix LO_CLANG_CC/LO_CLANG_CXX with ccache if needed
#
if test "$CCACHE" != "" -a -n "$LO_CLANG_CC" -a -n "$LO_CLANG_CXX"; then
    AC_MSG_CHECKING([whether $LO_CLANG_CC is already ccached])
    AC_LANG_PUSH([C])
    save_CC="$CC"
    CC="$LO_CLANG_CC"
    save_CFLAGS=$CFLAGS
    CFLAGS="$CFLAGS --ccache-skip -O2 -Werror"
    dnl an empty program will do, we're checking the compiler flags
    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([],[])],
                      [use_ccache=yes], [use_ccache=no])
    CFLAGS=$save_CFLAGS
    CC=$save_CC
    if test $use_ccache = yes -a "${CCACHE/*sccache*/}" != ""; then
        AC_MSG_RESULT([yes])
    else
        LO_CLANG_CC="$CCACHE $LO_CLANG_CC"
        AC_MSG_RESULT([no])
    fi
    AC_LANG_POP([C])

    AC_MSG_CHECKING([whether $LO_CLANG_CXX is already ccached])
    AC_LANG_PUSH([C++])
    save_CXX="$CXX"
    CXX="$LO_CLANG_CXX"
    save_CXXFLAGS=$CXXFLAGS
    CXXFLAGS="$CXXFLAGS --ccache-skip -O2 -Werror"
    dnl an empty program will do, we're checking the compiler flags
    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([],[])],
                      [use_ccache=yes], [use_ccache=no])
    if test $use_ccache = yes -a "${CCACHE/*sccache*/}" != ""; then
        AC_MSG_RESULT([yes])
    else
        LO_CLANG_CXX="$CCACHE $LO_CLANG_CXX"
        AC_MSG_RESULT([no])
    fi
    CXXFLAGS=$save_CXXFLAGS
    CXX=$save_CXX
    AC_LANG_POP([C++])
fi

AC_SUBST(LO_CLANG_CC)
AC_SUBST(LO_CLANG_CXX)
AC_SUBST(LO_CLANG_CXXFLAGS_INTRINSICS_SSE2)
AC_SUBST(LO_CLANG_CXXFLAGS_INTRINSICS_SSSE3)
AC_SUBST(LO_CLANG_CXXFLAGS_INTRINSICS_SSE41)
AC_SUBST(LO_CLANG_CXXFLAGS_INTRINSICS_SSE42)
AC_SUBST(LO_CLANG_CXXFLAGS_INTRINSICS_AVX)
AC_SUBST(LO_CLANG_CXXFLAGS_INTRINSICS_AVX2)
AC_SUBST(LO_CLANG_CXXFLAGS_INTRINSICS_AVX512)
AC_SUBST(LO_CLANG_CXXFLAGS_INTRINSICS_AVX512F)
AC_SUBST(LO_CLANG_CXXFLAGS_INTRINSICS_F16C)
AC_SUBST(LO_CLANG_CXXFLAGS_INTRINSICS_FMA)
AC_SUBST(CLANG_USE_LD)
AC_SUBST([HAVE_LO_CLANG_DLLEXPORTINLINES])

SYSTEM_GPGMEPP=

if test "$enable_gpgmepp" = no; then
    AC_MSG_CHECKING([whether to enable gpgmepp])
    AC_MSG_RESULT([no])
elif test "$enable_mpl_subset" = "yes"; then
    AC_MSG_CHECKING([whether gpgmepp should be disabled due to building just MPL])
    AC_MSG_RESULT([yes])
elif test "$enable_fuzzers" = "yes"; then
    AC_MSG_CHECKING([whether gpgmepp should be disabled due to oss-fuzz])
    AC_MSG_RESULT([yes])
elif test "$_os" = "Linux" -o "$_os" = "Darwin" -o "$_os" = "WINNT" ; then
    dnl ===================================================================
    dnl Check for system gpgme
    dnl ===================================================================
    AC_MSG_CHECKING([which gpgmepp to use])
    if test "$with_system_gpgmepp" = "yes"; then
        AC_MSG_RESULT([external])
        SYSTEM_GPGMEPP=TRUE

        # C++ library doesn't come with fancy gpgmepp-config, check for headers the old-fashioned way
        AC_CHECK_HEADER(gpgme++/gpgmepp_version.h, [ GPGMEPP_CFLAGS=-I/usr/include/gpgme++ ],
            [AC_MSG_ERROR([gpgmepp headers not found, install gpgmepp development package])], [])
        # progress_callback is the only func with plain C linkage
        # checking for it also filters out older, KDE-dependent libgpgmepp versions
        AC_CHECK_LIB(gpgmepp, progress_callback, [ GPGMEPP_LIBS=-lgpgmepp ],
            [AC_MSG_ERROR(gpgmepp not found or not functional)], [])
        AC_CHECK_HEADER(gpgme.h, [],
            [AC_MSG_ERROR([gpgme headers not found, install gpgme development package])], [])
    else
        AC_MSG_RESULT([internal])
        BUILD_TYPE="$BUILD_TYPE LIBGPGERROR LIBASSUAN GPGMEPP"
        AC_DEFINE([GPGME_CAN_EXPORT_MINIMAL_KEY])

        GPG_ERROR_CFLAGS="-I${WORKDIR}/UnpackedTarball/libgpg-error/src"
        LIBASSUAN_CFLAGS="-I${WORKDIR}/UnpackedTarball/libassuan/src"
        if test "$_os" != "WINNT"; then
            GPG_ERROR_LIBS="-L${WORKDIR}/UnpackedTarball/libgpg-error/src/.libs -lgpg-error"
            LIBASSUAN_LIBS="-L${WORKDIR}/UnpackedTarball/libassuan/src/.libs -lassuan"
        fi
    fi
    ENABLE_GPGMEPP=TRUE
    AC_DEFINE([HAVE_FEATURE_GPGME])
    AC_PATH_PROG(GPG, gpg)
    # TODO: Windows's cygwin gpg does not seem to work with our gpgme,
    # so let's exclude that manually for the moment
    if test -n "$GPG" -a "$_os" != "WINNT"; then
        # make sure we not only have a working gpgme, but a full working
        # gpg installation to run OpenPGP signature verification
        AC_DEFINE([HAVE_FEATURE_GPGVERIFY])
    fi
    if test "$_os" = "Linux"; then
      uid=`id -u`
      AC_MSG_CHECKING([for /run/user/$uid])
      if test -d /run/user/$uid; then
        AC_MSG_RESULT([yes])
        AC_PATH_PROG(GPGCONF, gpgconf)

        # Older versions of gpgconf are not working as expected, since
        # `gpgconf --remove-socketdir` fails to exit any gpg-agent daemon operating
        # on that socket dir that has (indirectly) been started by the tests in xmlsecurity/qa/unit/signing/signing.cxx
        # (see commit message of f0305ec0a7d199e605511844d9d6af98b66d4bfd%5E )
        AC_MSG_CHECKING([whether version of gpgconf is suitable ... ])
        GPGCONF_VERSION=`"$GPGCONF" --version | "$AWK" '/^gpgconf \(GnuPG\)/{print $3}'`
        GPGCONF_NUMVER=`echo $GPGCONF_VERSION | $AWK -F. '{ print \$1*10000+\$2*100+\$3 }'`
        if test "$GPGCONF_VERSION" = "2.2_OOo" -o "$GPGCONF_NUMVER" -ge "020200"; then
          AC_MSG_RESULT([yes, $GPGCONF_VERSION])
          AC_MSG_CHECKING([for gpgconf --create-socketdir... ])
          if $GPGCONF --dump-options > /dev/null ; then
            if $GPGCONF --dump-options | grep -q create-socketdir ; then
              AC_MSG_RESULT([yes])
              AC_DEFINE([HAVE_GPGCONF_SOCKETDIR])
              AC_DEFINE_UNQUOTED([GPGME_GPGCONF], ["$GPGCONF"])
            else
              AC_MSG_RESULT([no])
            fi
          else
            AC_MSG_RESULT([no. missing or broken gpgconf?])
          fi
        else
          AC_MSG_RESULT([no, $GPGCONF_VERSION])
        fi
      else
        AC_MSG_RESULT([no])
     fi
   fi
fi
AC_SUBST(ENABLE_GPGMEPP)
AC_SUBST(SYSTEM_GPGMEPP)
AC_SUBST(GPG_ERROR_CFLAGS)
AC_SUBST(GPG_ERROR_LIBS)
AC_SUBST(LIBASSUAN_CFLAGS)
AC_SUBST(LIBASSUAN_LIBS)
AC_SUBST(GPGMEPP_CFLAGS)
AC_SUBST(GPGMEPP_LIBS)

AC_MSG_CHECKING([whether to build the Wiki Publisher extension])
if test "x$enable_ext_wiki_publisher" = "xyes" -a "x$enable_extension_integration" != "xno" -a "$with_java" != "no"; then
    AC_MSG_RESULT([yes])
    ENABLE_MEDIAWIKI=TRUE
    BUILD_TYPE="$BUILD_TYPE XSLTML"
    if test  "x$with_java" = "xno"; then
        AC_MSG_ERROR([Wiki Publisher requires Java! Enable Java if you want to build it.])
    fi
else
    AC_MSG_RESULT([no])
    ENABLE_MEDIAWIKI=
    SCPDEFS="$SCPDEFS -DWITHOUT_EXTENSION_MEDIAWIKI"
fi
AC_SUBST(ENABLE_MEDIAWIKI)

AC_MSG_CHECKING([whether to build the Report Builder])
if test "$enable_report_builder" != "no" -a "$with_java" != "no"; then
    AC_MSG_RESULT([yes])
    ENABLE_REPORTBUILDER=TRUE
    AC_MSG_CHECKING([which jfreereport libs to use])
    if test "$with_system_jfreereport" = "yes"; then
        SYSTEM_JFREEREPORT=TRUE
        AC_MSG_RESULT([external])
        if test -z $SAC_JAR; then
            SAC_JAR=/usr/share/java/sac.jar
        fi
        if ! test -f $SAC_JAR; then
             AC_MSG_ERROR(sac.jar not found.)
        fi

        if test -z $LIBXML_JAR; then
            if test -f /usr/share/java/libxml-1.0.0.jar; then
                LIBXML_JAR=/usr/share/java/libxml-1.0.0.jar
            elif test -f /usr/share/java/libxml.jar; then
                LIBXML_JAR=/usr/share/java/libxml.jar
            else
                AC_MSG_ERROR(libxml.jar replacement not found.)
            fi
        elif ! test -f $LIBXML_JAR; then
            AC_MSG_ERROR(libxml.jar not found.)
        fi

        if test -z $FLUTE_JAR; then
            if test -f /usr/share/java/flute-1.3.0.jar; then
                FLUTE_JAR=/usr/share/java/flute-1.3.0.jar
            elif test -f /usr/share/java/flute.jar; then
                FLUTE_JAR=/usr/share/java/flute.jar
            else
                AC_MSG_ERROR(flute-1.3.0.jar replacement not found.)
            fi
        elif ! test -f $FLUTE_JAR; then
            AC_MSG_ERROR(flute-1.3.0.jar not found.)
        fi

        if test -z $JFREEREPORT_JAR; then
            if test -f /usr/share/java/flow-engine-0.9.2.jar; then
                JFREEREPORT_JAR=/usr/share/java/flow-engine-0.9.2.jar
            elif test -f /usr/share/java/flow-engine.jar; then
                JFREEREPORT_JAR=/usr/share/java/flow-engine.jar
            else
                AC_MSG_ERROR(jfreereport.jar replacement not found.)
            fi
        elif ! test -f  $JFREEREPORT_JAR; then
                AC_MSG_ERROR(jfreereport.jar not found.)
        fi

        if test -z $LIBLAYOUT_JAR; then
            if test -f /usr/share/java/liblayout-0.2.9.jar; then
                LIBLAYOUT_JAR=/usr/share/java/liblayout-0.2.9.jar
            elif test -f /usr/share/java/liblayout.jar; then
                LIBLAYOUT_JAR=/usr/share/java/liblayout.jar
            else
                AC_MSG_ERROR(liblayout.jar replacement not found.)
            fi
        elif ! test -f $LIBLAYOUT_JAR; then
                AC_MSG_ERROR(liblayout.jar not found.)
        fi

        if test -z $LIBLOADER_JAR; then
            if test -f /usr/share/java/libloader-1.0.0.jar; then
                LIBLOADER_JAR=/usr/share/java/libloader-1.0.0.jar
            elif test -f /usr/share/java/libloader.jar; then
                LIBLOADER_JAR=/usr/share/java/libloader.jar
            else
                AC_MSG_ERROR(libloader.jar replacement not found.)
            fi
        elif ! test -f  $LIBLOADER_JAR; then
            AC_MSG_ERROR(libloader.jar not found.)
        fi

        if test -z $LIBFORMULA_JAR; then
            if test -f /usr/share/java/libformula-0.2.0.jar; then
                LIBFORMULA_JAR=/usr/share/java/libformula-0.2.0.jar
            elif test -f /usr/share/java/libformula.jar; then
                LIBFORMULA_JAR=/usr/share/java/libformula.jar
            else
                AC_MSG_ERROR(libformula.jar replacement not found.)
            fi
        elif ! test -f $LIBFORMULA_JAR; then
                AC_MSG_ERROR(libformula.jar not found.)
        fi

        if test -z $LIBREPOSITORY_JAR; then
            if test -f /usr/share/java/librepository-1.0.0.jar; then
                LIBREPOSITORY_JAR=/usr/share/java/librepository-1.0.0.jar
            elif test -f /usr/share/java/librepository.jar; then
                LIBREPOSITORY_JAR=/usr/share/java/librepository.jar
            else
                AC_MSG_ERROR(librepository.jar replacement not found.)
            fi
        elif ! test -f $LIBREPOSITORY_JAR; then
            AC_MSG_ERROR(librepository.jar not found.)
        fi

        if test -z $LIBFONTS_JAR; then
            if test -f /usr/share/java/libfonts-1.0.0.jar; then
                LIBFONTS_JAR=/usr/share/java/libfonts-1.0.0.jar
            elif test -f /usr/share/java/libfonts.jar; then
                LIBFONTS_JAR=/usr/share/java/libfonts.jar
            else
                AC_MSG_ERROR(libfonts.jar replacement not found.)
            fi
        elif ! test -f $LIBFONTS_JAR; then
                AC_MSG_ERROR(libfonts.jar not found.)
        fi

        if test -z $LIBSERIALIZER_JAR; then
            if test -f /usr/share/java/libserializer-1.0.0.jar; then
                LIBSERIALIZER_JAR=/usr/share/java/libserializer-1.0.0.jar
            elif test -f /usr/share/java/libserializer.jar; then
                LIBSERIALIZER_JAR=/usr/share/java/libserializer.jar
            else
                AC_MSG_ERROR(libserializer.jar replacement not found.)
            fi
        elif ! test -f $LIBSERIALIZER_JAR; then
                AC_MSG_ERROR(libserializer.jar not found.)
        fi

        if test -z $LIBBASE_JAR; then
            if test -f /usr/share/java/libbase-1.0.0.jar; then
                LIBBASE_JAR=/usr/share/java/libbase-1.0.0.jar
            elif test -f /usr/share/java/libbase.jar; then
                LIBBASE_JAR=/usr/share/java/libbase.jar
            else
                AC_MSG_ERROR(libbase.jar replacement not found.)
            fi
        elif ! test -f $LIBBASE_JAR; then
            AC_MSG_ERROR(libbase.jar not found.)
        fi

    else
        AC_MSG_RESULT([internal])
        SYSTEM_JFREEREPORT=
        BUILD_TYPE="$BUILD_TYPE JFREEREPORT"
        NEED_ANT=TRUE
    fi
else
    AC_MSG_RESULT([no])
    ENABLE_REPORTBUILDER=
    SYSTEM_JFREEREPORT=
fi
AC_SUBST(ENABLE_REPORTBUILDER)
AC_SUBST(SYSTEM_JFREEREPORT)
AC_SUBST(SAC_JAR)
AC_SUBST(LIBXML_JAR)
AC_SUBST(FLUTE_JAR)
AC_SUBST(JFREEREPORT_JAR)
AC_SUBST(LIBBASE_JAR)
AC_SUBST(LIBLAYOUT_JAR)
AC_SUBST(LIBLOADER_JAR)
AC_SUBST(LIBFORMULA_JAR)
AC_SUBST(LIBREPOSITORY_JAR)
AC_SUBST(LIBFONTS_JAR)
AC_SUBST(LIBSERIALIZER_JAR)

# scripting provider for BeanShell?
AC_MSG_CHECKING([whether to build support for scripts in BeanShell])
if test "${enable_scripting_beanshell}" != "no" -a "x$with_java" != "xno"; then
    AC_MSG_RESULT([yes])
    ENABLE_SCRIPTING_BEANSHELL=TRUE

    dnl ===================================================================
    dnl Check for system beanshell
    dnl ===================================================================
    AC_MSG_CHECKING([which beanshell to use])
    if test "$with_system_beanshell" = "yes"; then
        AC_MSG_RESULT([external])
        SYSTEM_BSH=TRUE
        if test -z $BSH_JAR; then
            BSH_JAR=/usr/share/java/bsh.jar
        fi
        if ! test -f $BSH_JAR; then
            AC_MSG_ERROR(bsh.jar not found.)
        fi
    else
        AC_MSG_RESULT([internal])
        SYSTEM_BSH=
        BUILD_TYPE="$BUILD_TYPE BSH"
    fi
else
    AC_MSG_RESULT([no])
    ENABLE_SCRIPTING_BEANSHELL=
    SCPDEFS="$SCPDEFS -DWITHOUT_SCRIPTING_BEANSHELL"
fi
AC_SUBST(ENABLE_SCRIPTING_BEANSHELL)
AC_SUBST(SYSTEM_BSH)
AC_SUBST(BSH_JAR)

# scripting provider for JavaScript?
AC_MSG_CHECKING([whether to build support for scripts in JavaScript])
if test "${enable_scripting_javascript}" != "no" -a "x$with_java" != "xno"; then
    AC_MSG_RESULT([yes])
    ENABLE_SCRIPTING_JAVASCRIPT=TRUE

    dnl ===================================================================
    dnl Check for system rhino
    dnl ===================================================================
    AC_MSG_CHECKING([which rhino to use])
    if test "$with_system_rhino" = "yes"; then
        AC_MSG_RESULT([external])
        SYSTEM_RHINO=TRUE
        if test -z $RHINO_JAR; then
            RHINO_JAR=/usr/share/java/js.jar
        fi
        if ! test -f $RHINO_JAR; then
            AC_MSG_ERROR(js.jar not found.)
        fi
    else
        AC_MSG_RESULT([internal])
        SYSTEM_RHINO=
        BUILD_TYPE="$BUILD_TYPE RHINO"
        NEED_ANT=TRUE
    fi
else
    AC_MSG_RESULT([no])
    ENABLE_SCRIPTING_JAVASCRIPT=
    SCPDEFS="$SCPDEFS -DWITHOUT_SCRIPTING_JAVASCRIPT"
fi
AC_SUBST(ENABLE_SCRIPTING_JAVASCRIPT)
AC_SUBST(SYSTEM_RHINO)
AC_SUBST(RHINO_JAR)

# This is only used in Qt5/Qt6/KF5 checks to determine if /usr/lib64
# paths should be added to library search path. So lets put all 64-bit
# platforms there.
supports_multilib=
case "$host_cpu" in
x86_64 | powerpc64 | powerpc64le | s390x | aarch64 | mips64 | mips64el)
    if test "$SAL_TYPES_SIZEOFLONG" = "8"; then
        supports_multilib="yes"
    fi
    ;;
*)
    ;;
esac

dnl ===================================================================
dnl QT5 Integration
dnl ===================================================================

QT5_CFLAGS=""
QT5_LIBS=""
QMAKE5="qmake"
MOC5="moc"
QT5_GOBJECT_CFLAGS=""
QT5_GOBJECT_LIBS=""
QT5_HAVE_GOBJECT=""
QT5_PLATFORMS_SRCDIR=""
if test \( "$test_kf5" = "yes" -a "$ENABLE_KF5" = "TRUE" \) -o \
        \( "$test_qt5" = "yes" -a "$ENABLE_QT5" = "TRUE" \) -o \
        \( "$test_gtk3_kde5" = "yes" -a "$ENABLE_GTK3_KDE5" = "TRUE" \)
then
    qt5_incdirs="$QT5INC /usr/include/qt5 /usr/include $x_includes"
    qt5_libdirs="$QT5LIB /usr/lib/qt5 /usr/lib $x_libraries"

    if test -n "$supports_multilib"; then
        qt5_libdirs="$qt5_libdirs /usr/lib64/qt5 /usr/lib64/qt /usr/lib64"
    fi

    qt5_test_include="QtWidgets/qapplication.h"
    if test "$_os" = "Emscripten"; then
        qt5_test_library="libQt5Widgets.a"
    else
        qt5_test_library="libQt5Widgets.so"
    fi

    dnl Check for qmake5
    if test -n "$QT5DIR"; then
        AC_PATH_PROG(QMAKE5, [qmake], no, [$QT5DIR/bin])
    else
        AC_PATH_PROGS(QMAKE5, [qmake-qt5 qmake], no)
    fi
    if test "$QMAKE5" = "no"; then
        AC_MSG_ERROR([Qmake not found.  Please specify the root of your Qt5 installation by exporting QT5DIR before running "configure".])
    else
        qmake5_test_ver="`$QMAKE5 -v 2>&1 | $SED -n -e 's/^Using Qt version \(5\.[[0-9.]]\+\).*$/\1/p'`"
        if test -z "$qmake5_test_ver"; then
            AC_MSG_ERROR([Wrong qmake for Qt5 found. Please specify the root of your Qt5 installation by exporting QT5DIR before running "configure".])
        fi
        qmake5_minor_version="`echo $qmake5_test_ver | cut -d. -f2`"
        qt5_minimal_minor="6"
        if test "$qmake5_minor_version" -lt "$qt5_minimal_minor"; then
            AC_MSG_ERROR([The minimal supported Qt5 version is 5.${qt5_minimal_minor}, but your 'qmake -v' reports Qt5 version $qmake5_test_ver.])
        else
            AC_MSG_NOTICE([Detected Qt5 version: $qmake5_test_ver])
        fi
    fi

    qt5_incdirs="`$QMAKE5 -query QT_INSTALL_HEADERS` $qt5_incdirs"
    qt5_libdirs="`$QMAKE5 -query QT_INSTALL_LIBS` $qt5_libdirs"
    qt5_platformsdir="`$QMAKE5 -query QT_INSTALL_PLUGINS`/platforms"
    QT5_PLATFORMS_SRCDIR="$qt5_platformsdir"

    AC_MSG_CHECKING([for Qt5 headers])
    qt5_incdir="no"
    for inc_dir in $qt5_incdirs; do
        if test -r "$inc_dir/$qt5_test_include"; then
            qt5_incdir="$inc_dir"
            break
        fi
    done
    AC_MSG_RESULT([$qt5_incdir])
    if test "x$qt5_incdir" = "xno"; then
        AC_MSG_ERROR([Qt5 headers not found.  Please specify the root of your Qt5 installation by exporting QT5DIR before running "configure".])
    fi
    # check for scenario: qt5-qtbase-devel-*.86_64 installed but host is i686
    AC_LANG_PUSH([C++])
    save_CPPFLAGS=$CPPFLAGS
    CPPFLAGS="${CPPFLAGS} -I${qt5_incdir}"
    AC_CHECK_HEADER(QtCore/qconfig.h, [],
        [AC_MSG_ERROR(qconfig.h header not found.)], [])
    CPPFLAGS=$save_CPPFLAGS
    AC_LANG_POP([C++])

    AC_MSG_CHECKING([for Qt5 libraries])
    qt5_libdir="no"
    for lib_dir in $qt5_libdirs; do
        if test -r "$lib_dir/$qt5_test_library"; then
            qt5_libdir="$lib_dir"
            break
        fi
    done
    AC_MSG_RESULT([$qt5_libdir])
    if test "x$qt5_libdir" = "xno"; then
        AC_MSG_ERROR([Qt5 libraries not found.  Please specify the root of your Qt5 installation by exporting QT5DIR before running "configure".])
    fi

    if test "$_os" = "Emscripten"; then
        if test ! -f "$QT5_PLATFORMS_SRCDIR"/wasm_shell.html ; then
            QT5_PLATFORMS_SRCDIR="${QT5_PLATFORMS_SRCDIR/plugins/src\/plugins}/wasm"
        fi
        if test ! -f "${qt5_platformsdir}"/libqwasm.a -o ! -f "$QT5_PLATFORMS_SRCDIR"/wasm_shell.html; then
            AC_MSG_ERROR([No Qt5 WASM QPA plugin found in ${qt5_platformsdir} or ${QT5_PLATFORMS_SRCDIR}])
        fi
    fi

    QT5_CFLAGS="-I$qt5_incdir -DQT_CLEAN_NAMESPACE -DQT_THREAD_SUPPORT -DQT_NO_VERSION_TAGGING"
    QT5_CFLAGS=$(printf '%s' "$QT5_CFLAGS" | sed -e "s/-I/${ISYSTEM?}/g")
    QT5_LIBS="-L$qt5_libdir -lQt5Core -lQt5Gui -lQt5Widgets -lQt5Network"
    if test "$_os" = "Emscripten"; then
        QT5_LIBS="$QT5_LIBS -lqtpcre2 -lQt5EventDispatcherSupport -lQt5FontDatabaseSupport -L${qt5_platformsdir} -lqwasm"
    fi

    if test "$USING_X11" = TRUE; then
        PKG_CHECK_MODULES(QT5_XCB,[xcb],,[AC_MSG_ERROR([XCB not found, which is needed for correct app grouping in X11.])])
        PKG_CHECK_MODULES(QT5_XCB_ICCCM,[xcb-icccm],[
            QT5_HAVE_XCB_ICCCM=1
            AC_DEFINE(QT5_HAVE_XCB_ICCCM)
        ],[
            AC_MSG_WARN([XCB ICCCM not found, which is needed for old Qt versions (< 5.12) on some WMs to correctly group dialogs (like QTBUG-46626)])
            add_warning "XCB ICCCM not found, which is needed for Qt versions (< 5.12) on some WMs to correctly group dialogs (like QTBUG-46626)"
        ])
        QT5_CFLAGS="$QT5_CFLAGS $QT5_XCB_CFLAGS $QT5_XCB_ICCCM_CFLAGS"
        QT5_LIBS="$QT5_LIBS $QT5_XCB_LIBS $QT5_XCB_ICCCM_LIBS -lQt5X11Extras"
        QT5_USING_X11=1
        AC_DEFINE(QT5_USING_X11)
    fi

    dnl Check for Meta Object Compiler

    AC_PATH_PROGS( MOC5, [moc-qt5 moc], no, [`dirname $qt5_libdir`/bin:$QT5DIR/bin:$PATH])
    if test "$MOC5" = "no"; then
        AC_MSG_ERROR([Qt Meta Object Compiler not found.  Please specify
the root of your Qt installation by exporting QT5DIR before running "configure".])
    fi

    if test "$test_gstreamer_1_0" = yes; then
        PKG_CHECK_MODULES(QT5_GOBJECT,[gobject-2.0], [
                QT5_HAVE_GOBJECT=1
                AC_DEFINE(QT5_HAVE_GOBJECT)
            ],
            AC_MSG_WARN([[No GObject found, can't use QWidget GStreamer sink on wayland!]])
        )
    fi
fi
AC_SUBST(QT5_CFLAGS)
AC_SUBST(QT5_LIBS)
AC_SUBST(MOC5)
AC_SUBST(QT5_GOBJECT_CFLAGS)
AC_SUBST(QT5_GOBJECT_LIBS)
AC_SUBST(QT5_HAVE_GOBJECT)
AC_SUBST(QT5_PLATFORMS_SRCDIR)

dnl ===================================================================
dnl QT6 Integration
dnl ===================================================================

QT6_CFLAGS=""
QT6_LIBS=""
QMAKE6="qmake"
MOC6="moc"
QT6_PLATFORMS_SRCDIR=""
if test \( "$test_qt6" = "yes" -a "$ENABLE_QT6" = "TRUE" \)
then
    qt6_incdirs="$QT6INC /usr/include/qt6 /usr/include $x_includes"
    qt6_libdirs="$QT6LIB /usr/lib/qt6 /usr/lib $x_libraries"

    if test -n "$supports_multilib"; then
        qt6_libdirs="$qt6_libdirs /usr/lib64/qt6 /usr/lib64/qt /usr/lib64"
    fi

    qt6_test_include="QtWidgets/qapplication.h"
    if test "$_os" = "Emscripten"; then
        qt6_test_library="libQt6Widgets.a"
    else
        qt6_test_library="libQt6Widgets.so"
    fi

    dnl Check for qmake6
    if test -n "$QT6DIR"; then
        AC_PATH_PROG(QMAKE6, [qmake], no, [$QT6DIR/bin])
    else
        AC_PATH_PROGS(QMAKE6, [qmake-qt6 qmake], no)
    fi
    if test "$QMAKE6" = "no"; then
        AC_MSG_ERROR([Qmake not found.  Please specify the root of your Qt6 installation by exporting QT6DIR before running "configure".])
    else
        qmake6_test_ver="`$QMAKE6 -v 2>&1 | $SED -n -e 's/^Using Qt version \(6\.[[0-9.]]\+\).*$/\1/p'`"
        if test -z "$qmake6_test_ver"; then
            AC_MSG_ERROR([Wrong qmake for Qt6 found. Please specify the root of your Qt6 installation by exporting QT6DIR before running "configure".])
        fi
        AC_MSG_NOTICE([Detected Qt6 version: $qmake6_test_ver])
    fi

    qt6_incdirs="`$QMAKE6 -query QT_INSTALL_HEADERS` $qt6_incdirs"
    qt6_libdirs="`$QMAKE6 -query QT_INSTALL_LIBS` $qt6_libdirs"
    qt6_platformsdir="`$QMAKE6 -query QT_INSTALL_PLUGINS`/platforms"
    QT6_PLATFORMS_SRCDIR="$qt6_platformsdir"

    AC_MSG_CHECKING([for Qt6 headers])
    qt6_incdir="no"
    for inc_dir in $qt6_incdirs; do
        if test -r "$inc_dir/$qt6_test_include"; then
            qt6_incdir="$inc_dir"
            break
        fi
    done
    AC_MSG_RESULT([$qt6_incdir])
    if test "x$qt6_incdir" = "xno"; then
        AC_MSG_ERROR([Qt6 headers not found.  Please specify the root of your Qt6 installation by exporting QT6DIR before running "configure".])
    fi
    # check for scenario: qt6-qtbase-devel-*.86_64 installed but host is i686
    AC_LANG_PUSH([C++])
    save_CPPFLAGS=$CPPFLAGS
    CPPFLAGS="${CPPFLAGS} -I${qt6_incdir}"
    AC_CHECK_HEADER(QtCore/qconfig.h, [],
        [AC_MSG_ERROR(qconfig.h header not found.)], [])
    CPPFLAGS=$save_CPPFLAGS
    AC_LANG_POP([C++])

    AC_MSG_CHECKING([for Qt6 libraries])
    qt6_libdir="no"
    for lib_dir in $qt6_libdirs; do
        if test -r "$lib_dir/$qt6_test_library"; then
            qt6_libdir="$lib_dir"
            break
        fi
    done
    AC_MSG_RESULT([$qt6_libdir])
    if test "x$qt6_libdir" = "xno"; then
        AC_MSG_ERROR([Qt6 libraries not found.  Please specify the root of your Qt6 installation by exporting QT6DIR before running "configure".])
    fi

    if test "$_os" = "Emscripten"; then
        if test ! -f "$QT6_PLATFORMS_SRCDIR"/wasm_shell.html ; then
            QT6_PLATFORMS_SRCDIR="${QT6_PLATFORMS_SRCDIR/plugins/src\/plugins}/wasm"
        fi
        if test ! -f "${qt6_platformsdir}"/libqwasm.a -o ! -f "$QT6_PLATFORMS_SRCDIR"/wasm_shell.html; then
            AC_MSG_ERROR([No Qt6 WASM QPA plugin found in ${qt6_platformsdir} or ${QT6_PLATFORMS_SRCDIR}])
        fi
    fi

    QT6_CFLAGS="-I$qt6_incdir -DQT_CLEAN_NAMESPACE -DQT_THREAD_SUPPORT -DQT_NO_VERSION_TAGGING"
    QT6_CFLAGS=$(printf '%s' "$QT6_CFLAGS" | sed -e "s/-I/${ISYSTEM?}/g")
    QT6_LIBS="-L$qt6_libdir -lQt6Core -lQt6Gui -lQt6Widgets -lQt6Network"
    if test "$_os" = "Emscripten"; then
        QT6_LIBS="$QT6_LIBS -lqtpcre2 -lQt6EventDispatcherSupport -lQt6FontDatabaseSupport -L${qt6_platformsdir} -lqwasm"
    fi

    if test "$USING_X11" = TRUE; then
        PKG_CHECK_MODULES(QT6_XCB,[xcb],,[AC_MSG_ERROR([XCB not found, which is needed for key modifier handling in X11.])])
        QT6_CFLAGS="$QT6_CFLAGS $QT6_XCB_CFLAGS"
        QT6_LIBS="$QT6_LIBS $QT6_XCB_LIBS"
        QT6_USING_X11=1
        AC_DEFINE(QT6_USING_X11)
    fi

    dnl Check for Meta Object Compiler

    AC_PATH_PROGS( MOC6, [moc-qt6 moc], no, [`dirname $qt6_libdir`/libexec:$QT6DIR/libexec:$PATH])
    if test "$MOC6" = "no"; then
        AC_MSG_ERROR([Qt Meta Object Compiler not found.  Please specify
the root of your Qt installation by exporting QT6DIR before running "configure".])
    fi
fi
AC_SUBST(QT6_CFLAGS)
AC_SUBST(QT6_LIBS)
AC_SUBST(MOC6)
AC_SUBST(QT6_PLATFORMS_SRCDIR)

dnl ===================================================================
dnl KF5 Integration
dnl ===================================================================

KF5_CFLAGS=""
KF5_LIBS=""
KF5_CONFIG="kf5-config"
if test \( "$test_kf5" = "yes" -a "$ENABLE_KF5" = "TRUE" \) -o \
        \( "$test_gtk3_kde5" = "yes" -a "$ENABLE_GTK3_KDE5" = "TRUE" \)
then
    if test "$OS" = "HAIKU"; then
        haiku_arch="`echo $RTL_ARCH | tr X x`"
        kf5_haiku_incdirs="`findpaths -c ' ' -a $haiku_arch B_FIND_PATH_HEADERS_DIRECTORY`"
        kf5_haiku_libdirs="`findpaths -c ' ' -a $haiku_arch B_FIND_PATH_DEVELOP_LIB_DIRECTORY`"
    fi

    kf5_incdirs="$KF5INC /usr/include $kf5_haiku_incdirs $x_includes"
    kf5_libdirs="$KF5LIB /usr/lib /usr/lib/kf5 /usr/lib/kf5/devel $kf5_haiku_libdirs $x_libraries"
    if test -n "$supports_multilib"; then
        kf5_libdirs="$kf5_libdirs /usr/lib64 /usr/lib64/kf5 /usr/lib64/kf5/devel"
    fi

    kf5_test_include="KF5/kcoreaddons_version.h"
    kf5_test_library="libKF5CoreAddons.so"
    kf5_libdirs="$qt5_libdir $kf5_libdirs"

    dnl kf5 KDE4 support compatibility installed
    AC_PATH_PROG( KF5_CONFIG, $KF5_CONFIG, no, )
    if test "$KF5_CONFIG" != "no"; then
        kf5_incdirs="`$KF5_CONFIG --path include` $kf5_incdirs"
        kf5_libdirs="`$KF5_CONFIG --path lib` $kf5_libdirs"
    fi

    dnl Check for KF5 headers
    AC_MSG_CHECKING([for KF5 headers])
    kf5_incdir="no"
    for kf5_check in $kf5_incdirs; do
        if test -r "$kf5_check/$kf5_test_include"; then
            kf5_incdir="$kf5_check/KF5"
            break
        fi
    done
    AC_MSG_RESULT([$kf5_incdir])
    if test "x$kf5_incdir" = "xno"; then
        AC_MSG_ERROR([KF5 headers not found.  Please specify the root of your KF5 installation by exporting KF5DIR before running "configure".])
    fi

    dnl Check for KF5 libraries
    AC_MSG_CHECKING([for KF5 libraries])
    kf5_libdir="no"
    for kf5_check in $kf5_libdirs; do
        if test -r "$kf5_check/$kf5_test_library"; then
            kf5_libdir="$kf5_check"
            break
        fi
    done

    AC_MSG_RESULT([$kf5_libdir])
    if test "x$kf5_libdir" = "xno"; then
        AC_MSG_ERROR([KF5 libraries not found.  Please specify the root of your KF5 installation by exporting KF5DIR before running "configure".])
    fi

    KF5_CFLAGS="-I$kf5_incdir -I$kf5_incdir/KCoreAddons -I$kf5_incdir/KI18n -I$kf5_incdir/KConfigCore -I$kf5_incdir/KWindowSystem -I$kf5_incdir/KIOCore -I$kf5_incdir/KIOWidgets -I$kf5_incdir/KIOFileWidgets -I$qt5_incdir -I$qt5_incdir/QtCore -I$qt5_incdir/QtGui -I$qt5_incdir/QtWidgets -I$qt5_incdir/QtNetwork -DQT_CLEAN_NAMESPACE -DQT_THREAD_SUPPORT -DQT_NO_VERSION_TAGGING"
    KF5_LIBS="-L$kf5_libdir -lKF5CoreAddons -lKF5I18n -lKF5ConfigCore -lKF5WindowSystem -lKF5KIOCore -lKF5KIOWidgets -lKF5KIOFileWidgets -L$qt5_libdir -lQt5Core -lQt5Gui -lQt5Widgets -lQt5Network"
    KF5_CFLAGS=$(printf '%s' "$KF5_CFLAGS" | sed -e "s/-I/${ISYSTEM?}/g")

    if test "$USING_X11" = TRUE; then
        KF5_LIBS="$KF5_LIBS -lQt5X11Extras"
    fi

    AC_LANG_PUSH([C++])
    save_CXXFLAGS=$CXXFLAGS
    CXXFLAGS="$CXXFLAGS $KF5_CFLAGS"
    AC_MSG_CHECKING([whether KDE is >= 5.0])
       AC_RUN_IFELSE([AC_LANG_SOURCE([[
#include <kcoreaddons_version.h>

int main(int argc, char **argv) {
       if (KCOREADDONS_VERSION_MAJOR == 5 && KCOREADDONS_VERSION_MINOR >= 0) return 0;
       else return 1;
}
       ]])],[AC_MSG_RESULT([yes])],[AC_MSG_ERROR([KDE version too old])],[])
    CXXFLAGS=$save_CXXFLAGS
    AC_LANG_POP([C++])
fi
AC_SUBST(KF5_CFLAGS)
AC_SUBST(KF5_LIBS)

dnl ===================================================================
dnl Test whether to include Evolution 2 support
dnl ===================================================================
AC_MSG_CHECKING([whether to enable evolution 2 support])
if test "$enable_evolution2" = yes; then
    AC_MSG_RESULT([yes])
    PKG_CHECK_MODULES(GOBJECT, gobject-2.0)
    GOBJECT_CFLAGS=$(printf '%s' "$GOBJECT_CFLAGS" | sed -e "s/-I/${ISYSTEM?}/g")
    FilterLibs "${GOBJECT_LIBS}"
    GOBJECT_LIBS="${filteredlibs}"
    ENABLE_EVOAB2="TRUE"
else
    AC_MSG_RESULT([no])
fi
AC_SUBST(ENABLE_EVOAB2)
AC_SUBST(GOBJECT_CFLAGS)
AC_SUBST(GOBJECT_LIBS)

dnl ===================================================================
dnl Test which themes to include
dnl ===================================================================
AC_MSG_CHECKING([which themes to include])
# if none given use default subset of available themes
if test "x$with_theme" = "x" -o "x$with_theme" = "xyes"; then
    with_theme="breeze breeze_dark breeze_dark_svg breeze_svg colibre colibre_svg elementary elementary_svg karasa_jaga karasa_jaga_svg sifr sifr_svg sifr_dark sifr_dark_svg sukapura sukapura_svg"
fi

WITH_THEMES=""
if test "x$with_theme" != "xno"; then
    for theme in $with_theme; do
        case $theme in
        breeze|breeze_dark|breeze_dark_svg|breeze_svg|colibre|colibre_svg|elementary|elementary_svg|karasa_jaga|karasa_jaga_svg|sifr|sifr_svg|sifr_dark|sifr_dark_svg|sukapura|sukapura_svg) real_theme="$theme" ;;
        default) real_theme=colibre ;;
        *) AC_MSG_ERROR([Unknown value for --with-theme: $theme]) ;;
        esac
        WITH_THEMES=`echo "$WITH_THEMES $real_theme"|tr '\ ' '\n'|sort|uniq|tr '\n' '\ '`
    done
fi
AC_MSG_RESULT([$WITH_THEMES])
AC_SUBST([WITH_THEMES])
# FIXME: remove this, and the convenience default->colibre remapping after a grace period
for theme in $with_theme; do
    case $theme in
    default) AC_MSG_WARN([--with-theme=default is deprecated and will be removed, use --with-theme=colibre]) ;;
    *) ;;
    esac
done

###############################################################################
# Extensions checking
###############################################################################
AC_MSG_CHECKING([for extensions integration])
if test "x$enable_extension_integration" != "xno"; then
    WITH_EXTENSION_INTEGRATION=TRUE
    SCPDEFS="$SCPDEFS -DWITH_EXTENSION_INTEGRATION"
    AC_MSG_RESULT([yes, use integration])
else
    WITH_EXTENSION_INTEGRATION=
    AC_MSG_RESULT([no, do not integrate])
fi
AC_SUBST(WITH_EXTENSION_INTEGRATION)

dnl Should any extra extensions be included?
dnl There are standalone tests for each of these below.
WITH_EXTRA_EXTENSIONS=
AC_SUBST([WITH_EXTRA_EXTENSIONS])

libo_CHECK_EXTENSION([ConvertTextToNumber],[CT2N],[ct2n],[ct2n],[])
libo_CHECK_EXTENSION([Numbertext],[NUMBERTEXT],[numbertext],[numbertext],[b7cae45ad2c23551fd6ccb8ae2c1f59e-numbertext_0.9.5.oxt])
if test "x$with_java" != "xno"; then
    libo_CHECK_EXTENSION([NLPSolver],[NLPSOLVER],[nlpsolver],[nlpsolver],[])
    libo_CHECK_EXTENSION([LanguageTool],[LANGUAGETOOL],[languagetool],[languagetool],[])
fi

AC_MSG_CHECKING([whether to build opens___.ttf])
if test "$enable_build_opensymbol" = "yes"; then
    AC_MSG_RESULT([yes])
    AC_PATH_PROG(FONTFORGE, fontforge)
    if test -z "$FONTFORGE"; then
        AC_MSG_ERROR([fontforge not installed])
    fi
else
    AC_MSG_RESULT([no])
    BUILD_TYPE="$BUILD_TYPE OPENSYMBOL"
fi
AC_SUBST(FONTFORGE)

dnl ===================================================================
dnl Test whether to include fonts
dnl ===================================================================
AC_MSG_CHECKING([whether to include third-party fonts])
if test "$with_fonts" != "no"; then
    AC_MSG_RESULT([yes])
    WITH_FONTS=TRUE
    BUILD_TYPE="$BUILD_TYPE MORE_FONTS"
    AC_DEFINE(HAVE_MORE_FONTS)
else
    AC_MSG_RESULT([no])
    WITH_FONTS=
    SCPDEFS="$SCPDEFS -DWITHOUT_FONTS"
fi
AC_SUBST(WITH_FONTS)


dnl ===================================================================
dnl Test whether to enable online update service
dnl ===================================================================
AC_MSG_CHECKING([whether to enable online update])
ENABLE_ONLINE_UPDATE=
ENABLE_ONLINE_UPDATE_MAR=
UPDATE_CONFIG=
if test "$enable_online_update" = ""; then
    AC_MSG_RESULT([no])
else
    if test "$enable_online_update" = "mar"; then
        AC_MSG_RESULT([yes - MAR-based online update])
        ENABLE_ONLINE_UPDATE_MAR="TRUE"
        if test "$with_update_config" = ""; then
            AC_MSG_ERROR([mar based online updater needs an update config specified with "with-update-config])
        fi
        UPDATE_CONFIG="$with_update_config"
        AC_DEFINE(HAVE_FEATURE_UPDATE_MAR)
    elif test "$enable_online_update" = "yes"; then
        AC_MSG_RESULT([yes])
        ENABLE_ONLINE_UPDATE="TRUE"
    else
        AC_MSG_RESULT([no])
    fi
fi
AC_SUBST(ENABLE_ONLINE_UPDATE)
AC_SUBST(ENABLE_ONLINE_UPDATE_MAR)
AC_SUBST(UPDATE_CONFIG)


PRIVACY_POLICY_URL="$with_privacy_policy_url"
if test "$ENABLE_ONLINE_UPDATE" = TRUE -o "$ENABLE_BREAKPAD" = "TRUE"; then
    if test "x$with_privacy_policy_url" = "xundefined"; then
        AC_MSG_FAILURE([online update or breakpad/crashreporting are enabled, but no --with-privacy-policy-url=... was provided])
    fi
fi
AC_SUBST(PRIVACY_POLICY_URL)
dnl ===================================================================
dnl Test whether we need bzip2
dnl ===================================================================
SYSTEM_BZIP2=
if test "$ENABLE_ONLINE_UPDATE_MAR" = "TRUE"; then
    AC_MSG_CHECKING([whether to use system bzip2])
    if test "$with_system_bzip2" = yes; then
        SYSTEM_BZIP2=TRUE
        AC_MSG_RESULT([yes])
        PKG_CHECK_MODULES(BZIP2, bzip2)
        FilterLibs "${BZIP2_LIBS}"
        BZIP2_LIBS="${filteredlibs}"
    else
        AC_MSG_RESULT([no])
        BUILD_TYPE="$BUILD_TYPE BZIP2"
    fi
fi
AC_SUBST(SYSTEM_BZIP2)
AC_SUBST(BZIP2_CFLAGS)
AC_SUBST(BZIP2_LIBS)

dnl ===================================================================
dnl Test whether to enable extension update
dnl ===================================================================
AC_MSG_CHECKING([whether to enable extension update])
ENABLE_EXTENSION_UPDATE=
if test "x$enable_extension_update" = "xno"; then
    AC_MSG_RESULT([no])
else
    AC_MSG_RESULT([yes])
    ENABLE_EXTENSION_UPDATE="TRUE"
    AC_DEFINE(ENABLE_EXTENSION_UPDATE)
    SCPDEFS="$SCPDEFS -DENABLE_EXTENSION_UPDATE"
fi
AC_SUBST(ENABLE_EXTENSION_UPDATE)


dnl ===================================================================
dnl Test whether to create MSI with LIMITUI=1 (silent install)
dnl ===================================================================
AC_MSG_CHECKING([whether to create MSI with LIMITUI=1 (silent install)])
if test "$enable_silent_msi" = "" -o "$enable_silent_msi" = "no"; then
    AC_MSG_RESULT([no])
    ENABLE_SILENT_MSI=
else
    AC_MSG_RESULT([yes])
    ENABLE_SILENT_MSI=TRUE
    SCPDEFS="$SCPDEFS -DENABLE_SILENT_MSI"
fi
AC_SUBST(ENABLE_SILENT_MSI)

AC_MSG_CHECKING([whether and how to use Xinerama])
if test "$_os" = "Linux" -o "$_os" = "FreeBSD"; then
    if test "$x_libraries" = "default_x_libraries"; then
        XINERAMALIB=`$PKG_CONFIG --variable=libdir xinerama`
        if test "x$XINERAMALIB" = x; then
           XINERAMALIB="/usr/lib"
        fi
    else
        XINERAMALIB="$x_libraries"
    fi
    if test -e "$XINERAMALIB/libXinerama.so" -a -e "$XINERAMALIB/libXinerama.a"; then
        # we have both versions, let the user decide but use the dynamic one
        # per default
        USE_XINERAMA=TRUE
        if test -z "$with_static_xinerama" -o -n "$with_system_libs"; then
            XINERAMA_LINK=dynamic
        else
            XINERAMA_LINK=static
        fi
    elif test -e "$XINERAMALIB/libXinerama.so" -a ! -e "$XINERAMALIB/libXinerama.a"; then
        # we have only the dynamic version
        USE_XINERAMA=TRUE
        XINERAMA_LINK=dynamic
    elif test -e "$XINERAMALIB/libXinerama.a"; then
        # static version
        if echo $host_cpu | $GREP -E 'i[[3456]]86' 2>/dev/null >/dev/null; then
            USE_XINERAMA=TRUE
            XINERAMA_LINK=static
        else
            USE_XINERAMA=
            XINERAMA_LINK=none
        fi
    else
        # no Xinerama
        USE_XINERAMA=
        XINERAMA_LINK=none
    fi
    if test "$USE_XINERAMA" = "TRUE"; then
        AC_MSG_RESULT([yes, with $XINERAMA_LINK linking])
        AC_CHECK_HEADER(X11/extensions/Xinerama.h, [],
            [AC_MSG_ERROR(Xinerama header not found.)], [])
        XEXTLIBS=`$PKG_CONFIG --variable=libs xext`
        if test "x$XEXTLIB" = x; then
           XEXTLIBS="-L$XLIB -L$XINERAMALIB -lXext"
        fi
        XINERAMA_EXTRA_LIBS="$XEXTLIBS"
        if test "$_os" = "FreeBSD"; then
            XINERAMA_EXTRA_LIBS="$XINERAMA_EXTRA_LIBS -lXt"
        fi
        if test "$_os" = "Linux"; then
            XINERAMA_EXTRA_LIBS="$XINERAMA_EXTRA_LIBS -ldl"
        fi
        AC_CHECK_LIB([Xinerama], [XineramaIsActive], [:],
            [AC_MSG_ERROR(Xinerama not functional?)], [$XINERAMA_EXTRA_LIBS])
    else
        AC_MSG_RESULT([no, libXinerama not found or wrong architecture.])
    fi
else
    USE_XINERAMA=
    XINERAMA_LINK=none
    AC_MSG_RESULT([no])
fi
AC_SUBST(USE_XINERAMA)
AC_SUBST(XINERAMA_LINK)

dnl ===================================================================
dnl Test whether to build cairo or rely on the system version
dnl ===================================================================

if test "$test_cairo" = "yes"; then
    AC_MSG_CHECKING([whether to use the system cairo])

    : ${with_system_cairo:=$with_system_libs}
    if test "$with_system_cairo" = "yes"; then
        SYSTEM_CAIRO=TRUE
        AC_MSG_RESULT([yes])

        PKG_CHECK_MODULES( CAIRO, cairo >= 1.8.0 )
        CAIRO_CFLAGS=$(printf '%s' "$CAIRO_CFLAGS" | sed -e "s/-I/${ISYSTEM?}/g")
        FilterLibs "${CAIRO_LIBS}"
        CAIRO_LIBS="${filteredlibs}"

        if test "$test_xrender" = "yes"; then
            AC_MSG_CHECKING([whether Xrender.h defines PictStandardA8])
            AC_LANG_PUSH([C])
            AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <X11/extensions/Xrender.h>]],[[
#ifdef PictStandardA8
#else
      return fail;
#endif
]])],[AC_MSG_RESULT([yes])],[AC_MSG_ERROR([no, X headers too old.])])

            AC_LANG_POP([C])
        fi
    else
        AC_MSG_RESULT([no])
        BUILD_TYPE="$BUILD_TYPE CAIRO"
    fi

    if test "$enable_cairo_canvas" != no; then
        AC_DEFINE(ENABLE_CAIRO_CANVAS)
        ENABLE_CAIRO_CANVAS=TRUE
    fi
fi

AC_SUBST(CAIRO_CFLAGS)
AC_SUBST(CAIRO_LIBS)
AC_SUBST(ENABLE_CAIRO_CANVAS)
AC_SUBST(SYSTEM_CAIRO)

dnl ===================================================================
dnl Test whether to use avahi
dnl ===================================================================
if test "$_os" = "WINNT"; then
    # Windows uses bundled mDNSResponder
    BUILD_TYPE="$BUILD_TYPE MDNSRESPONDER"
elif test "$_os" != "Darwin" -a "$enable_avahi" = "yes"; then
    PKG_CHECK_MODULES([AVAHI], [avahi-client >= 0.6.10],
                      [ENABLE_AVAHI="TRUE"])
    AC_DEFINE(HAVE_FEATURE_AVAHI)
    AVAHI_CFLAGS=$(printf '%s' "$AVAHI_CFLAGS" | sed -e "s/-I/${ISYSTEM?}/g")
    FilterLibs "${AVAHI_LIBS}"
    AVAHI_LIBS="${filteredlibs}"
fi

AC_SUBST(ENABLE_AVAHI)
AC_SUBST(AVAHI_CFLAGS)
AC_SUBST(AVAHI_LIBS)

dnl ===================================================================
dnl Test whether to use liblangtag
dnl ===================================================================
SYSTEM_LIBLANGTAG=
AC_MSG_CHECKING([whether to use system liblangtag])
if test "$with_system_liblangtag" = yes; then
    SYSTEM_LIBLANGTAG=TRUE
    AC_MSG_RESULT([yes])
    PKG_CHECK_MODULES( LIBLANGTAG, liblangtag >= 0.4.0)
    dnl cf. <https://bitbucket.org/tagoh/liblangtag/commits/9324836a0d1c> "Fix a build issue with inline keyword"
    PKG_CHECK_EXISTS([liblangtag >= 0.5.5], [], [AC_DEFINE([LIBLANGTAG_INLINE_FIX])])
    LIBLANGTAG_CFLAGS=$(printf '%s' "$LIBLANGTAG_CFLAGS" | sed -e "s/-I/${ISYSTEM?}/g")
    FilterLibs "${LIBLANGTAG_LIBS}"
    LIBLANGTAG_LIBS="${filteredlibs}"
else
    SYSTEM_LIBLANGTAG=
    AC_MSG_RESULT([no])
    BUILD_TYPE="$BUILD_TYPE LIBLANGTAG"
    LIBLANGTAG_CFLAGS="-I${WORKDIR}/UnpackedTarball/liblangtag"
    if test "$COM" = "MSC"; then
        LIBLANGTAG_LIBS="${WORKDIR}/UnpackedTarball/liblangtag/liblangtag/.libs/liblangtag.lib"
    else
        LIBLANGTAG_LIBS="-L${WORKDIR}/UnpackedTarball/liblangtag/liblangtag/.libs -llangtag"
    fi
fi
AC_SUBST(SYSTEM_LIBLANGTAG)
AC_SUBST(LIBLANGTAG_CFLAGS)
AC_SUBST(LIBLANGTAG_LIBS)

dnl ===================================================================
dnl Test whether to build libpng or rely on the system version
dnl ===================================================================

libo_CHECK_SYSTEM_MODULE([libpng],[LIBPNG],[libpng],["-I${WORKDIR}/UnpackedTarball/libpng"],["-L${WORKDIR}/LinkTarget/StaticLibrary -llibpng"])

dnl ===================================================================
dnl Check for runtime JVM search path
dnl ===================================================================
if test "$ENABLE_JAVA" != ""; then
    AC_MSG_CHECKING([whether to use specific JVM search path at runtime])
    if test -n "$with_jvm_path" -a "$with_jvm_path" != "no"; then
        AC_MSG_RESULT([yes])
        if ! test -d "$with_jvm_path"; then
            AC_MSG_ERROR(["$with_jvm_path" not a directory])
        fi
        if ! test -d "$with_jvm_path"jvm; then
            AC_MSG_ERROR(["$with_jvm_path"jvm not found, point with_jvm_path to \[/path/to/\]jvm])
        fi
        JVM_ONE_PATH_CHECK="$with_jvm_path"
        AC_SUBST(JVM_ONE_PATH_CHECK)
    else
        AC_MSG_RESULT([no])
    fi
fi

dnl ===================================================================
dnl Test for the presence of Ant and that it works
dnl ===================================================================

if test "$ENABLE_JAVA" != "" -a "$NEED_ANT" = "TRUE" -a "$cross_compiling" != "yes"; then
    ANT_HOME=; export ANT_HOME
    WITH_ANT_HOME=; export WITH_ANT_HOME
    if test -z "$with_ant_home" -a -n "$LODE_HOME" ; then
        if test -x "$LODE_HOME/opt/ant/bin/ant" ; then
            if test "$_os" = "WINNT"; then
                with_ant_home="`cygpath -m $LODE_HOME/opt/ant`"
            else
                with_ant_home="$LODE_HOME/opt/ant"
            fi
        elif test -x  "$LODE_HOME/opt/bin/ant" ; then
            with_ant_home="$LODE_HOME/opt/ant"
        fi
    fi
    if test -z "$with_ant_home"; then
        AC_PATH_PROGS(ANT, [ant ant.sh ant.bat ant.cmd])
    else
        if test "$_os" = "WINNT"; then
            # AC_PATH_PROGS needs unix path
            with_ant_home=`cygpath -u "$with_ant_home"`
        fi
        AbsolutePath "$with_ant_home"
        with_ant_home=$absolute_path
        AC_PATH_PROGS(ANT, [ant ant.sh ant.bat ant.cmd],,$with_ant_home/bin:$PATH)
        WITH_ANT_HOME=$with_ant_home
        ANT_HOME=$with_ant_home
    fi

    if test -z "$ANT"; then
        AC_MSG_ERROR([Ant not found - Make sure it's in the path or use --with-ant-home])
    else
        # resolve relative or absolute symlink
        while test -h "$ANT"; do
            a_cwd=`pwd`
            a_basename=`basename "$ANT"`
            a_script=`ls -l "$ANT" | $SED "s/.*${a_basename} -> //g"`
            cd "`dirname "$ANT"`"
            cd "`dirname "$a_script"`"
            ANT="`pwd`"/"`basename "$a_script"`"
            cd "$a_cwd"
        done

        AC_MSG_CHECKING([if $ANT works])
        mkdir -p conftest.dir
        a_cwd=$(pwd)
        cd conftest.dir
        cat > conftest.java << EOF
        public class conftest {
            int testmethod(int a, int b) {
                    return a + b;
            }
        }
EOF

        cat > conftest.xml << EOF
        <project name="conftest" default="conftest">
        <target name="conftest">
            <javac srcdir="." includes="conftest.java">
            </javac>
        </target>
        </project>
EOF

        AC_TRY_COMMAND("$ANT" -buildfile conftest.xml 1>&2)
        if test $? = 0 -a -f ./conftest.class; then
            AC_MSG_RESULT([Ant works])
            if test -z "$WITH_ANT_HOME"; then
                ANT_HOME=`"$ANT" -diagnostics | $EGREP "ant.home :" | $SED -e "s#ant.home : ##g"`
                if test -z "$ANT_HOME"; then
                    ANT_HOME=`echo "$ANT" | $SED -n "s/\/bin\/ant.*\$//p"`
                fi
            else
                ANT_HOME="$WITH_ANT_HOME"
            fi
        else
            echo "configure: Ant test failed" >&5
            cat conftest.java >&5
            cat conftest.xml >&5
            AC_MSG_ERROR([Ant does not work - Some Java projects will not build!])
        fi
        cd "$a_cwd"
        rm -fr conftest.dir
    fi
    if test -z "$ANT_HOME"; then
        ANT_HOME="NO_ANT_HOME"
    else
        PathFormat "$ANT_HOME"
        ANT_HOME="$formatted_path"
        PathFormat "$ANT"
        ANT="$formatted_path"
    fi

    dnl Checking for ant.jar
    if test "$ANT_HOME" != "NO_ANT_HOME"; then
        AC_MSG_CHECKING([Ant lib directory])
        if test -f $ANT_HOME/lib/ant.jar; then
            ANT_LIB="$ANT_HOME/lib"
        else
            if test -f $ANT_HOME/ant.jar; then
                ANT_LIB="$ANT_HOME"
            else
                if test -f /usr/share/java/ant.jar; then
                    ANT_LIB=/usr/share/java
                else
                    if test -f /usr/share/ant-core/lib/ant.jar; then
                        ANT_LIB=/usr/share/ant-core/lib
                    else
                        if test -f $ANT_HOME/lib/ant/ant.jar; then
                            ANT_LIB="$ANT_HOME/lib/ant"
                        else
                            if test -f /usr/share/lib/ant/ant.jar; then
                                ANT_LIB=/usr/share/lib/ant
                            else
                                AC_MSG_ERROR([Ant libraries not found!])
                            fi
                        fi
                    fi
                fi
            fi
        fi
        PathFormat "$ANT_LIB"
        ANT_LIB="$formatted_path"
        AC_MSG_RESULT([Ant lib directory found.])
    fi

    ant_minver=1.6.0
    ant_minminor1=`echo $ant_minver | cut -d"." -f2`

    AC_MSG_CHECKING([whether Ant is >= $ant_minver])
    ant_version=`"$ANT" -version | $AWK '$3 == "version" { print $4; }'`
    ant_version_major=`echo $ant_version | cut -d. -f1`
    ant_version_minor=`echo $ant_version | cut -d. -f2`
    echo "configure: ant_version $ant_version " >&5
    echo "configure: ant_version_major $ant_version_major " >&5
    echo "configure: ant_version_minor $ant_version_minor " >&5
    if test "$ant_version_major" -ge "2"; then
        AC_MSG_RESULT([yes, $ant_version])
    elif test "$ant_version_major" = "1" -a "$ant_version_minor" -ge "$ant_minminor1"; then
        AC_MSG_RESULT([yes, $ant_version])
    else
        AC_MSG_ERROR([no, you need at least Ant >= $ant_minver])
    fi

    rm -f conftest* core core.* *.core
fi
AC_SUBST(ANT)
AC_SUBST(ANT_HOME)
AC_SUBST(ANT_LIB)

OOO_JUNIT_JAR=
HAMCREST_JAR=
if test "$ENABLE_JAVA" != "" -a "$with_junit" != "no" -a "$cross_compiling" != "yes"; then
    AC_MSG_CHECKING([for JUnit 4])
    if test "$with_junit" = "yes"; then
        if test -n "$LODE_HOME" -a -e "$LODE_HOME/opt/share/java/junit.jar" ; then
            OOO_JUNIT_JAR="$LODE_HOME/opt/share/java/junit.jar"
        elif test -e /usr/share/java/junit4.jar; then
            OOO_JUNIT_JAR=/usr/share/java/junit4.jar
        else
           if test -e /usr/share/lib/java/junit.jar; then
              OOO_JUNIT_JAR=/usr/share/lib/java/junit.jar
           else
              OOO_JUNIT_JAR=/usr/share/java/junit.jar
           fi
        fi
    else
        OOO_JUNIT_JAR=$with_junit
    fi
    if test "$_os" = "WINNT"; then
        OOO_JUNIT_JAR=`cygpath -m "$OOO_JUNIT_JAR"`
    fi
    printf 'import org.junit.Before;' > conftest.java
    if "$JAVACOMPILER" -classpath "$OOO_JUNIT_JAR" conftest.java >&5 2>&5; then
        AC_MSG_RESULT([$OOO_JUNIT_JAR])
    else
        AC_MSG_ERROR(
[cannot find JUnit 4 jar; please install one in the default location (/usr/share/java),
 specify its pathname via --with-junit=..., or disable it via --without-junit])
    fi
    rm -f conftest.class conftest.java
    if test $OOO_JUNIT_JAR != ""; then
        BUILD_TYPE="$BUILD_TYPE QADEVOOO"
    fi

    AC_MSG_CHECKING([for included Hamcrest])
    printf 'import org.hamcrest.BaseDescription;' > conftest.java
    if "$JAVACOMPILER" -classpath "$OOO_JUNIT_JAR" conftest.java >&5 2>&5; then
        AC_MSG_RESULT([Included in $OOO_JUNIT_JAR])
    else
        AC_MSG_RESULT([Not included])
        AC_MSG_CHECKING([for standalone hamcrest jar.])
        if test "$with_hamcrest" = "yes"; then
            if test -e /usr/share/lib/java/hamcrest.jar; then
                HAMCREST_JAR=/usr/share/lib/java/hamcrest.jar
            elif test -e /usr/share/java/hamcrest/core.jar; then
                HAMCREST_JAR=/usr/share/java/hamcrest/core.jar
            elif test -e /usr/share/java/hamcrest/hamcrest.jar; then
                HAMCREST_JAR=/usr/share/java/hamcrest/hamcrest.jar
            else
                HAMCREST_JAR=/usr/share/java/hamcrest.jar
            fi
        else
            HAMCREST_JAR=$with_hamcrest
        fi
        if test "$_os" = "WINNT"; then
            HAMCREST_JAR=`cygpath -m "$HAMCREST_JAR"`
        fi
        if "$JAVACOMPILER" -classpath "$HAMCREST_JAR" conftest.java >&5 2>&5; then
            AC_MSG_RESULT([$HAMCREST_JAR])
        else
            AC_MSG_ERROR([junit does not contain hamcrest; please use a junit jar that includes hamcrest, install a hamcrest jar in the default location (/usr/share/java),
                          specify its path with --with-hamcrest=..., or disable junit with --without-junit])
        fi
    fi
    rm -f conftest.class conftest.java
fi
AC_SUBST(OOO_JUNIT_JAR)
AC_SUBST(HAMCREST_JAR)


AC_SUBST(SCPDEFS)

#
# check for wget and curl
#
WGET=
CURL=

if test "$enable_fetch_external" != "no"; then

CURL=`which curl 2>/dev/null`

for i in wget /usr/bin/wget /usr/local/bin/wget /usr/sfw/bin/wget /opt/sfw/bin/wget /opt/local/bin/wget; do
    # wget new enough?
    $i --help 2> /dev/null | $GREP no-use-server-timestamps 2>&1 > /dev/null
    if test $? -eq 0; then
        WGET=$i
        break
    fi
done

if test -z "$WGET" -a -z "$CURL"; then
    AC_MSG_ERROR([neither wget nor curl found!])
fi

fi

AC_SUBST(WGET)
AC_SUBST(CURL)

#
# check for sha256sum
#
SHA256SUM=

for i in shasum /usr/local/bin/shasum /usr/sfw/bin/shasum /opt/sfw/bin/shasum /opt/local/bin/shasum; do
    eval "$i -a 256 --version" > /dev/null 2>&1
    ret=$?
    if test $ret -eq 0; then
        SHA256SUM="$i -a 256"
        break
    fi
done

if test -z "$SHA256SUM"; then
    for i in sha256sum /usr/local/bin/sha256sum /usr/sfw/bin/sha256sum /opt/sfw/bin/sha256sum /opt/local/bin/sha256sum; do
        eval "$i --version" > /dev/null 2>&1
        ret=$?
        if test $ret -eq 0; then
            SHA256SUM=$i
            break
        fi
    done
fi

if test -z "$SHA256SUM"; then
    AC_MSG_ERROR([no sha256sum found!])
fi

AC_SUBST(SHA256SUM)

dnl ===================================================================
dnl Dealing with l10n options
dnl ===================================================================
AC_MSG_CHECKING([which languages to be built])
# get list of all languages
# generate shell variable from completelangiso= from solenv/inc/langlist.mk
# the sed command does the following:
#   + if a line ends with a backslash, append the next line to it
#   + adds " on the beginning of the value (after =)
#   + adds " at the end of the value
#   + removes en-US; we want to put it on the beginning
#   + prints just the section starting with 'completelangiso=' and ending with the " at the end of line
[eval $(sed -e :a -e '/\\$/N; s/\\\n//; ta' -n -e 's/=/="/;s/\([^\\]\)$/\1"/;s/en-US//;/^completelangiso/p' $SRC_ROOT/solenv/inc/langlist.mk)]
ALL_LANGS="en-US $completelangiso"
# check the configured localizations
WITH_LANG="$with_lang"

# Check for --without-lang which turns up as $with_lang being "no". Luckily there is no language with code "no".
# (Norwegian is "nb" and "nn".)
if test "$WITH_LANG" = "no"; then
    WITH_LANG=
fi

if test -z "$WITH_LANG" -o "$WITH_LANG" = "en-US"; then
    AC_MSG_RESULT([en-US])
else
    AC_MSG_RESULT([$WITH_LANG])
    GIT_NEEDED_SUBMODULES="translations $GIT_NEEDED_SUBMODULES"
    if test -z "$MSGFMT"; then
        if test -n "$LODE_HOME" -a -x "$LODE_HOME/opt/bin/msgfmt" ; then
            MSGFMT="$LODE_HOME/opt/bin/msgfmt"
        elif test -x "/opt/lo/bin/msgfmt"; then
            MSGFMT="/opt/lo/bin/msgfmt"
        else
            AC_CHECK_PROGS(MSGFMT, [msgfmt])
            if test -z "$MSGFMT"; then
                AC_MSG_ERROR([msgfmt not found. Install GNU gettext, or re-run without languages.])
            fi
        fi
    fi
    if test -z "$MSGUNIQ"; then
        if test -n "$LODE_HOME" -a -x "$LODE_HOME/opt/bin/msguniq" ; then
            MSGUNIQ="$LODE_HOME/opt/bin/msguniq"
        elif test -x "/opt/lo/bin/msguniq"; then
            MSGUNIQ="/opt/lo/bin/msguniq"
        else
            AC_CHECK_PROGS(MSGUNIQ, [msguniq])
            if test -z "$MSGUNIQ"; then
                AC_MSG_ERROR([msguniq not found. Install GNU gettext, or re-run without languages.])
            fi
        fi
    fi
fi
AC_SUBST(MSGFMT)
AC_SUBST(MSGUNIQ)
# check that the list is valid
for lang in $WITH_LANG; do
    test "$lang" = "ALL" && continue
    # need to check for the exact string, so add space before and after the list of all languages
    for vl in $ALL_LANGS; do
        if test "$vl" = "$lang"; then
           break
        fi
    done
    if test "$vl" != "$lang"; then
        # if you're reading this - you prolly quoted your languages remove the quotes ...
        AC_MSG_ERROR([invalid language: '$lang' (vs '$v1'); supported languages are: $ALL_LANGS])
    fi
done
if test -n "$WITH_LANG" -a "$WITH_LANG" != "ALL"; then
    echo $WITH_LANG | grep -q en-US
    test $? -ne 1 || WITH_LANG=`echo $WITH_LANG en-US`
fi
# list with substituted ALL
WITH_LANG_LIST=`echo $WITH_LANG | sed "s/ALL/$ALL_LANGS/"`
test -z "$WITH_LANG_LIST" && WITH_LANG_LIST="en-US"
test "$WITH_LANG" = "en-US" && WITH_LANG=
if test "$enable_release_build" = "" -o "$enable_release_build" = "no"; then
    test "$WITH_LANG_LIST" = "en-US" || WITH_LANG_LIST=`echo $WITH_LANG_LIST qtz`
    ALL_LANGS=`echo $ALL_LANGS qtz`
fi
AC_SUBST(ALL_LANGS)
AC_DEFINE_UNQUOTED(WITH_LANG,"$WITH_LANG")
AC_SUBST(WITH_LANG)
AC_SUBST(WITH_LANG_LIST)
AC_SUBST(GIT_NEEDED_SUBMODULES)

WITH_POOR_HELP_LOCALIZATIONS=
if test -d "$SRC_ROOT/translations/source"; then
    for l in `ls -1 $SRC_ROOT/translations/source`; do
        if test ! -d "$SRC_ROOT/translations/source/$l/helpcontent2"; then
            WITH_POOR_HELP_LOCALIZATIONS="$WITH_POOR_HELP_LOCALIZATIONS $l"
        fi
    done
fi
AC_SUBST(WITH_POOR_HELP_LOCALIZATIONS)

if test -n "$with_locales" -a "$with_locales" != ALL; then
    WITH_LOCALES="$with_locales"

    just_langs="`echo $WITH_LOCALES | sed -e 's/_[A-Z]*//g'`"
    # Only languages and scripts for which we actually have ifdefs need to be handled. Also see
    # config_host/config_locales.h.in
    for locale in $WITH_LOCALES; do
        lang=${locale%_*}

        AC_DEFINE_UNQUOTED(WITH_LOCALE_$lang, 1)

        case $lang in
        hi|mr*ne)
            AC_DEFINE(WITH_LOCALE_FOR_SCRIPT_Deva)
            ;;
        bg|ru)
            AC_DEFINE(WITH_LOCALE_FOR_SCRIPT_Cyrl)
            ;;
        esac
    done
else
    AC_DEFINE(WITH_LOCALE_ALL)
fi
AC_SUBST(WITH_LOCALES)

dnl git submodule update --reference
dnl ===================================================================
if test -n "${GIT_REFERENCE_SRC}"; then
    for repo in ${GIT_NEEDED_SUBMODULES}; do
        if ! test -d "${GIT_REFERENCE_SRC}"/${repo}; then
            AC_MSG_ERROR([referenced git: required repository does not exist: ${GIT_REFERENCE_SRC}/${repo}])
        fi
    done
fi
AC_SUBST(GIT_REFERENCE_SRC)

dnl git submodules linked dirs
dnl ===================================================================
if test -n "${GIT_LINK_SRC}"; then
    for repo in ${GIT_NEEDED_SUBMODULES}; do
        if ! test -d "${GIT_LINK_SRC}"/${repo}; then
            AC_MSG_ERROR([linked git: required repository does not exist: ${GIT_LINK_SRC}/${repo}])
        fi
    done
fi
AC_SUBST(GIT_LINK_SRC)

dnl branding
dnl ===================================================================
AC_MSG_CHECKING([for alternative branding images directory])
# initialize mapped arrays
BRAND_INTRO_IMAGES="intro.png intro-highres.png"
brand_files="$BRAND_INTRO_IMAGES logo.svg logo_inverted.svg logo-sc.svg logo-sc_inverted.svg about.svg"

if test -z "$with_branding" -o "$with_branding" = "no"; then
    AC_MSG_RESULT([none])
    DEFAULT_BRAND_IMAGES="$brand_files"
else
    if ! test -d $with_branding ; then
        AC_MSG_ERROR([No directory $with_branding, falling back to default branding])
    else
        AC_MSG_RESULT([$with_branding])
        CUSTOM_BRAND_DIR="$with_branding"
        for lfile in $brand_files
        do
            if ! test -f $with_branding/$lfile ; then
                AC_MSG_WARN([Branded file $lfile does not exist, using the default one])
                DEFAULT_BRAND_IMAGES="$DEFAULT_BRAND_IMAGES $lfile"
            else
                CUSTOM_BRAND_IMAGES="$CUSTOM_BRAND_IMAGES $lfile"
            fi
        done
        check_for_progress="yes"
    fi
fi
AC_SUBST([BRAND_INTRO_IMAGES])
AC_SUBST([CUSTOM_BRAND_DIR])
AC_SUBST([CUSTOM_BRAND_IMAGES])
AC_SUBST([DEFAULT_BRAND_IMAGES])


AC_MSG_CHECKING([for 'intro' progress settings])
PROGRESSBARCOLOR=
PROGRESSSIZE=
PROGRESSPOSITION=
PROGRESSFRAMECOLOR=
PROGRESSTEXTCOLOR=
PROGRESSTEXTBASELINE=

if test "$check_for_progress" = "yes" -a -f "$with_branding/progress.conf" ; then
    source "$with_branding/progress.conf"
    AC_MSG_RESULT([settings found in $with_branding/progress.conf])
else
    AC_MSG_RESULT([none])
fi

AC_SUBST(PROGRESSBARCOLOR)
AC_SUBST(PROGRESSSIZE)
AC_SUBST(PROGRESSPOSITION)
AC_SUBST(PROGRESSFRAMECOLOR)
AC_SUBST(PROGRESSTEXTCOLOR)
AC_SUBST(PROGRESSTEXTBASELINE)


dnl ===================================================================
dnl Custom build version
dnl ===================================================================
AC_MSG_CHECKING([for extra build ID])
if test -n "$with_extra_buildid" -a "$with_extra_buildid" != "yes" ; then
    EXTRA_BUILDID="$with_extra_buildid"
fi
# in tinderboxes, it is easier to set EXTRA_BUILDID via the environment variable instead of configure switch
if test -n "$EXTRA_BUILDID" ; then
    AC_MSG_RESULT([$EXTRA_BUILDID])
else
    AC_MSG_RESULT([not set])
fi
AC_DEFINE_UNQUOTED([EXTRA_BUILDID], ["$EXTRA_BUILDID"])

OOO_VENDOR=
AC_MSG_CHECKING([for vendor])
if test -z "$with_vendor" -o "$with_vendor" = "no"; then
    OOO_VENDOR="$USERNAME"

    if test -z "$OOO_VENDOR"; then
        OOO_VENDOR="$USER"
    fi

    if test -z "$OOO_VENDOR"; then
        OOO_VENDOR="`id -u -n`"
    fi

    AC_MSG_RESULT([not set, using $OOO_VENDOR])
else
    OOO_VENDOR="$with_vendor"
    AC_MSG_RESULT([$OOO_VENDOR])
fi
AC_DEFINE_UNQUOTED(OOO_VENDOR,"$OOO_VENDOR")
AC_SUBST(OOO_VENDOR)

if test "$_os" = "Android" ; then
    ANDROID_PACKAGE_NAME=
    AC_MSG_CHECKING([for Android package name])
    if test -z "$with_android_package_name" -o "$with_android_package_name" = "no"; then
        if test -n "$ENABLE_DEBUG"; then
            # Default to the package name that makes ndk-gdb happy.
            ANDROID_PACKAGE_NAME="org.libreoffice"
        else
            ANDROID_PACKAGE_NAME="org.example.libreoffice"
        fi

        AC_MSG_RESULT([not set, using $ANDROID_PACKAGE_NAME])
    else
        ANDROID_PACKAGE_NAME="$with_android_package_name"
        AC_MSG_RESULT([$ANDROID_PACKAGE_NAME])
    fi
    AC_SUBST(ANDROID_PACKAGE_NAME)
fi

AC_MSG_CHECKING([whether to install the compat oo* wrappers])
if test "$with_compat_oowrappers" = "yes"; then
    WITH_COMPAT_OOWRAPPERS=TRUE
    AC_MSG_RESULT(yes)
else
    WITH_COMPAT_OOWRAPPERS=
    AC_MSG_RESULT(no)
fi
AC_SUBST(WITH_COMPAT_OOWRAPPERS)

INSTALLDIRNAME=`echo AC_PACKAGE_NAME | $AWK '{print tolower($0)}'`
AC_MSG_CHECKING([for install dirname])
if test -n "$with_install_dirname" -a "$with_install_dirname" != "no" -a "$with_install_dirname" != "yes"; then
    INSTALLDIRNAME="$with_install_dirname"
fi
AC_MSG_RESULT([$INSTALLDIRNAME])
AC_SUBST(INSTALLDIRNAME)

AC_MSG_CHECKING([for prefix])
test "x$prefix" = xNONE && prefix=$ac_default_prefix
test "x$exec_prefix" = xNONE && exec_prefix=$prefix
PREFIXDIR="$prefix"
AC_MSG_RESULT([$PREFIXDIR])
AC_SUBST(PREFIXDIR)

LIBDIR=[$(eval echo $(eval echo $libdir))]
AC_SUBST(LIBDIR)

DATADIR=[$(eval echo $(eval echo $datadir))]
AC_SUBST(DATADIR)

MANDIR=[$(eval echo $(eval echo $mandir))]
AC_SUBST(MANDIR)

DOCDIR=[$(eval echo $(eval echo $docdir))]
AC_SUBST(DOCDIR)

BINDIR=[$(eval echo $(eval echo $bindir))]
AC_SUBST(BINDIR)

INSTALLDIR="$LIBDIR/$INSTALLDIRNAME"
AC_SUBST(INSTALLDIR)

TESTINSTALLDIR="${BUILDDIR}/test-install"
AC_SUBST(TESTINSTALLDIR)


# ===================================================================
# OAuth2 id and secrets
# ===================================================================

AC_MSG_CHECKING([for Google Drive client id and secret])
if test "$with_gdrive_client_id" = "no" -o -z "$with_gdrive_client_id"; then
    AC_MSG_RESULT([not set])
    GDRIVE_CLIENT_ID="\"\""
    GDRIVE_CLIENT_SECRET="\"\""
else
    AC_MSG_RESULT([set])
    GDRIVE_CLIENT_ID="\"$with_gdrive_client_id\""
    GDRIVE_CLIENT_SECRET="\"$with_gdrive_client_secret\""
fi
AC_DEFINE_UNQUOTED(GDRIVE_CLIENT_ID, $GDRIVE_CLIENT_ID)
AC_DEFINE_UNQUOTED(GDRIVE_CLIENT_SECRET, $GDRIVE_CLIENT_SECRET)

AC_MSG_CHECKING([for Alfresco Cloud client id and secret])
if test "$with_alfresco_cloud_client_id" = "no" -o -z "$with_alfresco_cloud_client_id"; then
    AC_MSG_RESULT([not set])
    ALFRESCO_CLOUD_CLIENT_ID="\"\""
    ALFRESCO_CLOUD_CLIENT_SECRET="\"\""
else
    AC_MSG_RESULT([set])
    ALFRESCO_CLOUD_CLIENT_ID="\"$with_alfresco_cloud_client_id\""
    ALFRESCO_CLOUD_CLIENT_SECRET="\"$with_alfresco_cloud_client_secret\""
fi
AC_DEFINE_UNQUOTED(ALFRESCO_CLOUD_CLIENT_ID, $ALFRESCO_CLOUD_CLIENT_ID)
AC_DEFINE_UNQUOTED(ALFRESCO_CLOUD_CLIENT_SECRET, $ALFRESCO_CLOUD_CLIENT_SECRET)

AC_MSG_CHECKING([for OneDrive client id and secret])
if test "$with_onedrive_client_id" = "no" -o -z "$with_onedrive_client_id"; then
    AC_MSG_RESULT([not set])
    ONEDRIVE_CLIENT_ID="\"\""
    ONEDRIVE_CLIENT_SECRET="\"\""
else
    AC_MSG_RESULT([set])
    ONEDRIVE_CLIENT_ID="\"$with_onedrive_client_id\""
    ONEDRIVE_CLIENT_SECRET="\"$with_onedrive_client_secret\""
fi
AC_DEFINE_UNQUOTED(ONEDRIVE_CLIENT_ID, $ONEDRIVE_CLIENT_ID)
AC_DEFINE_UNQUOTED(ONEDRIVE_CLIENT_SECRET, $ONEDRIVE_CLIENT_SECRET)


dnl ===================================================================
dnl Hook up LibreOffice's nodep environmental variable to automake's equivalent
dnl --enable-dependency-tracking configure option
dnl ===================================================================
AC_MSG_CHECKING([whether to enable dependency tracking])
if test "$enable_dependency_tracking" = "no"; then
    nodep=TRUE
    AC_MSG_RESULT([no])
else
    AC_MSG_RESULT([yes])
fi
AC_SUBST(nodep)

dnl ===================================================================
dnl Number of CPUs to use during the build
dnl ===================================================================
AC_MSG_CHECKING([for number of processors to use])
# plain --with-parallelism is just the default
if test -n "$with_parallelism" -a "$with_parallelism" != "yes"; then
    if test "$with_parallelism" = "no"; then
        PARALLELISM=0
    else
        PARALLELISM=$with_parallelism
    fi
else
    if test "$enable_icecream" = "yes"; then
        PARALLELISM="40"
    else
        case `uname -s` in

        Darwin|FreeBSD|NetBSD|OpenBSD)
            PARALLELISM=`sysctl -n hw.ncpu`
            ;;

        Linux)
            PARALLELISM=`getconf _NPROCESSORS_ONLN`
        ;;
        # what else than above does profit here *and* has /proc?
        *)
            PARALLELISM=`grep $'^processor\t*:' /proc/cpuinfo | wc -l`
            ;;
        esac

        # If we hit the catch-all case, but /proc/cpuinfo doesn't exist or has an
        # unexpected format, 'wc -l' will have returned 0 (and we won't use -j at all).
    fi
fi

if test "$no_parallelism_make" = "YES" && test $PARALLELISM -gt 1; then
    if test -z "$with_parallelism"; then
            AC_MSG_WARN([gmake 3.81 crashes with parallelism > 1, reducing it to 1. upgrade to 3.82 to avoid this.])
            add_warning "gmake 3.81 crashes with parallelism > 1, reducing it to 1. upgrade to 3.82 to avoid this."
            PARALLELISM="1"
    else
        add_warning "make 3.81 is prone to crashes with parallelism > 1. Since --with-parallelism was explicitly given, it is honored, but do not complain when make segfaults on you."
    fi
fi

if test $PARALLELISM -eq 0; then
    AC_MSG_RESULT([explicit make -j option needed])
else
    AC_MSG_RESULT([$PARALLELISM])
fi
AC_SUBST(PARALLELISM)

IWYU_PATH="$with_iwyu"
AC_SUBST(IWYU_PATH)
if test ! -z "$IWYU_PATH"; then
    if test ! -f "$IWYU_PATH"; then
        AC_MSG_ERROR([cannot find include-what-you-use binary specified by --with-iwyu])
    fi
fi

#
# Set up ILIB for MSVC build
#
ILIB1=
if test "$build_os" = "cygwin"; then
    ILIB="."
    if test -n "$JAVA_HOME"; then
        ILIB="$ILIB;$JAVA_HOME/lib"
    fi
    ILIB1=-link
    ILIB="$ILIB;$COMPATH/lib/$WIN_HOST_ARCH"
    ILIB1="$ILIB1 -LIBPATH:$COMPATH/lib/$WIN_HOST_ARCH"
    ILIB="$ILIB;$WINDOWS_SDK_HOME/lib/$WIN_HOST_ARCH"
    ILIB1="$ILIB1 -LIBPATH:$WINDOWS_SDK_HOME/lib/$WIN_HOST_ARCH"
    if test $WINDOWS_SDK_VERSION = 80 -o $WINDOWS_SDK_VERSION = 81 -o $WINDOWS_SDK_VERSION = 10; then
        ILIB="$ILIB;$WINDOWS_SDK_HOME/lib/$winsdklibsubdir/um/$WIN_HOST_ARCH"
        ILIB1="$ILIB1 -LIBPATH:$WINDOWS_SDK_HOME/lib/$winsdklibsubdir/um/$WIN_HOST_ARCH"
    fi
    PathFormat "${UCRTSDKDIR}lib/$UCRTVERSION/ucrt/$WIN_HOST_ARCH"
    ucrtlibpath_formatted=$formatted_path
    ILIB="$ILIB;$ucrtlibpath_formatted"
    ILIB1="$ILIB1 -LIBPATH:$ucrtlibpath_formatted"
    if test -f "$DOTNET_FRAMEWORK_HOME/lib/mscoree.lib"; then
        ILIB="$ILIB;$DOTNET_FRAMEWORK_HOME/lib"
    else
        ILIB="$ILIB;$DOTNET_FRAMEWORK_HOME/Lib/um/$WIN_HOST_ARCH"
    fi

    if test "$cross_compiling" != "yes"; then
        ILIB_FOR_BUILD="$ILIB"
    fi
fi
AC_SUBST(ILIB)
AC_SUBST(ILIB_FOR_BUILD)

AC_MSG_CHECKING([whether $CXX_BASE supports a working C++20 consteval])
dnl ...that does not suffer from <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=96994> "Missing code
dnl from consteval constructor initializing const variable",
dnl <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98752> "wrong 'error: ‘this’ is not a constant
dnl expression' with consteval constructor", <https://bugs.llvm.org/show_bug.cgi?id=50063> "code
dnl using consteval: 'clang/lib/CodeGen/Address.h:38: llvm::Value*
dnl clang::CodeGen::Address::getPointer() const: Assertion `isValid()' failed.'", or
dnl <https://developercommunity.visualstudio.com/t/1581879> "Bogus error C7595 with consteval
dnl constructor in ternary expression (/std:c++latest)":
AC_LANG_PUSH([C++])
save_CXX=$CXX
if test "$COM" = MSC && test "$COM_IS_CLANG" != TRUE; then
    CXX="env LIB=$ILIB $CXX"
fi
save_CXXFLAGS=$CXXFLAGS
CXXFLAGS="$CXXFLAGS $CXXFLAGS_CXX11"
AC_RUN_IFELSE([AC_LANG_PROGRAM([
        struct S {
            consteval S() { i = 1; }
            int i = 0;
        };
        S const s;

        struct S1 { consteval S1(int) {} };
        struct S2 {
            S1 x;
            S2(): x(0) {}
        };

        struct S3 {
            consteval S3() {}
            union {
                int a;
                unsigned b = 0;
            };
        };
        void f() { S3(); }

        struct S4 { consteval S4() = default; };
        void f4(bool b) { b ? S4() : S4(); }
    ], [
        return (s.i == 1) ? 0 : 1;
    ])], [
        AC_DEFINE([HAVE_CPP_CONSTEVAL],[1])
        AC_MSG_RESULT([yes])
    ], [AC_MSG_RESULT([no])], [AC_MSG_RESULT([assumed no (cross compiling)])])
CXX=$save_CXX
CXXFLAGS=$save_CXXFLAGS
AC_LANG_POP([C++])

# ===================================================================
# Creating bigger shared library to link against
# ===================================================================
AC_MSG_CHECKING([whether to create huge library])
MERGELIBS=

if test $_os = iOS -o $_os = Android; then
    # Never any point in mergelibs for these as we build just static
    # libraries anyway...
    enable_mergelibs=no
fi

if test -n "$enable_mergelibs" -a "$enable_mergelibs" != "no"; then
    if test $_os != Linux -a $_os != WINNT; then
        add_warning "--enable-mergelibs is not tested for this platform"
    fi
    MERGELIBS="TRUE"
    AC_MSG_RESULT([yes])
    AC_DEFINE(ENABLE_MERGELIBS)
else
    AC_MSG_RESULT([no])
fi
AC_SUBST([MERGELIBS])

dnl ===================================================================
dnl icerun is a wrapper that stops us spawning tens of processes
dnl locally - for tools that can't be executed on the compile cluster
dnl this avoids a dozen javac's ganging up on your laptop to kill it.
dnl ===================================================================
AC_MSG_CHECKING([whether to use icerun wrapper])
ICECREAM_RUN=
if test "$enable_icecream" = "yes" && which icerun >/dev/null 2>&1 ; then
    ICECREAM_RUN=icerun
    AC_MSG_RESULT([yes])
else
    AC_MSG_RESULT([no])
fi
AC_SUBST(ICECREAM_RUN)

dnl ===================================================================
dnl Setup the ICECC_VERSION for the build the same way it was set for
dnl configure, so that CC/CXX and ICECC_VERSION are in sync
dnl ===================================================================
x_ICECC_VERSION=[\#]
if test -n "$ICECC_VERSION" ; then
    x_ICECC_VERSION=
fi
AC_SUBST(x_ICECC_VERSION)
AC_SUBST(ICECC_VERSION)

dnl ===================================================================

AC_MSG_CHECKING([MPL subset])
MPL_SUBSET=

if test "$enable_mpl_subset" = "yes"; then
    warn_report=false
    if test "$enable_report_builder" != "no" -a "$with_java" != "no"; then
        warn_report=true
    elif test "$ENABLE_REPORTBUILDER" = "TRUE"; then
        warn_report=true
    fi
    if test "$warn_report" = "true"; then
        AC_MSG_ERROR([need to --disable-report-builder - extended database report builder.])
    fi
    if test "x$enable_postgresql_sdbc" != "xno"; then
        AC_MSG_ERROR([need to --disable-postgresql-sdbc - the PostgreSQL database backend.])
    fi
    if test "$enable_lotuswordpro" = "yes"; then
        AC_MSG_ERROR([need to --disable-lotuswordpro - a Lotus Word Pro file format import filter.])
    fi
    if test "$WITH_WEBDAV" = "neon"; then
        AC_MSG_ERROR([need --with-webdav=serf or --without-webdav - webdav support.])
    fi
    if test -n "$ENABLE_POPPLER"; then
        if test "x$SYSTEM_POPPLER" = "x"; then
            AC_MSG_ERROR([need to disable PDF import via poppler or use system library])
        fi
    fi
    # cf. m4/libo_check_extension.m4
    if test "x$WITH_EXTRA_EXTENSIONS" != "x"; then
        AC_MSG_ERROR([need to disable extra extensions '$WITH_EXTRA_EXTENSIONS'])
    fi
    for theme in $WITH_THEMES; do
        case $theme in
        breeze|breeze_dark|breeze_dark_svg|breeze_svg|elementary|elementary_svg|karasa_jaga|karasa_jaga_svg) #denylist of icon themes under GPL or LGPL
            AC_MSG_ERROR([need to disable icon themes from '$WITH_THEMES': $theme present, use --with-theme=colibre]) ;;
        *) : ;;
        esac
    done

    ENABLE_OPENGL_TRANSITIONS=

    if test "$enable_lpsolve" != "no" -o "x$ENABLE_LPSOLVE" = "xTRUE"; then
        AC_MSG_ERROR([need to --disable-lpsolve - calc linear programming solver.])
    fi

    MPL_SUBSET="TRUE"
    AC_DEFINE(MPL_HAVE_SUBSET)
    AC_MSG_RESULT([only])
else
    AC_MSG_RESULT([no restrictions])
fi
AC_SUBST(MPL_SUBSET)

dnl ===================================================================

AC_MSG_CHECKING([formula logger])
ENABLE_FORMULA_LOGGER=

if test "x$enable_formula_logger" = "xyes"; then
    AC_MSG_RESULT([yes])
    AC_DEFINE(ENABLE_FORMULA_LOGGER)
    ENABLE_FORMULA_LOGGER=TRUE
elif test -n "$ENABLE_DBGUTIL" ; then
    AC_MSG_RESULT([yes])
    AC_DEFINE(ENABLE_FORMULA_LOGGER)
    ENABLE_FORMULA_LOGGER=TRUE
else
    AC_MSG_RESULT([no])
fi

AC_SUBST(ENABLE_FORMULA_LOGGER)

dnl ===================================================================
dnl Checking for active Antivirus software.
dnl ===================================================================

if test $_os = WINNT -a -f "$SRC_ROOT/antivirusDetection.vbs" ; then
    AC_MSG_CHECKING([for active Antivirus software])
    ANTIVIRUS_LIST=`cscript.exe //Nologo $SRC_ROOT/antivirusDetection.vbs`
    if [ [ "$ANTIVIRUS_LIST" != "NULL" ] ]; then
        if [ [ "$ANTIVIRUS_LIST" != "NOT_FOUND" ] ]; then
            AC_MSG_RESULT([found])
            EICAR_STRING='X5O!P%@AP@<:@4\PZX54(P^)7CC)7}$EICAR-STANDARD-ANTIVIRUS-TEST-FILE!$H+H*'
            echo $EICAR_STRING > $SRC_ROOT/eicar
            EICAR_TEMP_FILE_CONTENTS=`cat $SRC_ROOT/eicar`
            rm $SRC_ROOT/eicar
            if [ [ "$EICAR_STRING" != "$EICAR_TEMP_FILE_CONTENTS" ] ]; then
                AC_MSG_ERROR([Exclude the build and source directories associated with LibreOffice in the following Antivirus software: $ANTIVIRUS_LIST])
            fi
            echo $EICAR_STRING > $BUILDDIR/eicar
            EICAR_TEMP_FILE_CONTENTS=`cat $BUILDDIR/eicar`
            rm $BUILDDIR/eicar
            if [ [ "$EICAR_STRING" != "$EICAR_TEMP_FILE_CONTENTS" ] ]; then
                AC_MSG_ERROR([Exclude the build and source directories associated with LibreOffice in the following Antivirus software: $ANTIVIRUS_LIST])
            fi
            add_warning "To speed up builds and avoid failures in unit tests, it is highly recommended that you exclude the build and source directories associated with LibreOffice in the following Antivirus software: $ANTIVIRUS_LIST"
        else
            AC_MSG_RESULT([not found])
        fi
    else
        AC_MSG_RESULT([n/a])
    fi
fi

dnl ===================================================================
dnl Setting up the environment.
dnl ===================================================================
AC_MSG_NOTICE([setting up the build environment variables...])

AC_SUBST(COMPATH)

if test "$build_os" = "cygwin"; then
    if test -d "$COMPATH/atlmfc/lib/spectre"; then
        ATL_LIB="$COMPATH/atlmfc/lib/spectre"
        ATL_INCLUDE="$COMPATH/atlmfc/include"
    elif test -d "$COMPATH/atlmfc/lib"; then
        ATL_LIB="$COMPATH/atlmfc/lib"
        ATL_INCLUDE="$COMPATH/atlmfc/include"
    else
        ATL_LIB="$WINDOWS_SDK_HOME/lib" # Doesn't exist for VSE
        ATL_INCLUDE="$WINDOWS_SDK_HOME/include/atl"
    fi
    ATL_LIB="$ATL_LIB/$WIN_HOST_ARCH"
    ATL_LIB=`win_short_path_for_make "$ATL_LIB"`
    ATL_INCLUDE=`win_short_path_for_make "$ATL_INCLUDE"`

    # sort.exe and find.exe also exist in C:/Windows/system32 so need /usr/bin/
    PathFormat "/usr/bin/find.exe"
    FIND="$formatted_path"
    PathFormat "/usr/bin/sort.exe"
    SORT="$formatted_path"
    PathFormat "/usr/bin/grep.exe"
    WIN_GREP="$formatted_path"
    PathFormat "/usr/bin/ls.exe"
    WIN_LS="$formatted_path"
    PathFormat "/usr/bin/touch.exe"
    WIN_TOUCH="$formatted_path"
else
    FIND=find
    SORT=sort
fi

AC_SUBST(ATL_INCLUDE)
AC_SUBST(ATL_LIB)
AC_SUBST(FIND)
AC_SUBST(SORT)
AC_SUBST(WIN_GREP)
AC_SUBST(WIN_LS)
AC_SUBST(WIN_TOUCH)

AC_SUBST(BUILD_TYPE)

AC_SUBST(SOLARINC)

PathFormat "$PERL"
PERL="$formatted_path"
AC_SUBST(PERL)

if test -n "$TMPDIR"; then
    TEMP_DIRECTORY="$TMPDIR"
else
    TEMP_DIRECTORY="/tmp"
fi
if test "$build_os" = "cygwin"; then
    TEMP_DIRECTORY=`cygpath -m "$TEMP_DIRECTORY"`
fi
AC_SUBST(TEMP_DIRECTORY)

# setup the PATH for the environment
if test -n "$LO_PATH_FOR_BUILD"; then
    LO_PATH="$LO_PATH_FOR_BUILD"
    case "$host_os" in
    cygwin*|wsl*)
        pathmunge "$MSVC_HOST_PATH" "before"
        ;;
    esac
else
    LO_PATH="$PATH"

    case "$host_os" in

    aix*|dragonfly*|freebsd*|linux-gnu*|*netbsd*|openbsd*)
        if test "$ENABLE_JAVA" != ""; then
            pathmunge "$JAVA_HOME/bin" "after"
        fi
        ;;

    cygwin*|wsl*)
        # Win32 make needs native paths
        if test "$GNUMAKE_WIN_NATIVE" = "TRUE" ; then
            LO_PATH=`cygpath -p -m "$PATH"`
        fi
        if test "$WIN_BUILD_ARCH" = "x64"; then
            # needed for msi packaging
            pathmunge "$WINDOWS_SDK_BINDIR_NO_ARCH/x86" "before"
        fi
        # .NET 4.6 and higher don't have bin directory
        if test -f "$DOTNET_FRAMEWORK_HOME/bin"; then
            pathmunge "$DOTNET_FRAMEWORK_HOME/bin" "before"
        fi
        pathmunge "$WINDOWS_SDK_HOME/bin" "before"
        pathmunge "$CSC_PATH" "before"
        pathmunge "$MIDL_PATH" "before"
        pathmunge "$AL_PATH" "before"
        pathmunge "$MSVC_MULTI_PATH" "before"
        pathmunge "$MSVC_BUILD_PATH" "before"
        if test -n "$MSBUILD_PATH" ; then
            pathmunge "$MSBUILD_PATH" "before"
        fi
        pathmunge "$WINDOWS_SDK_BINDIR_NO_ARCH/$WIN_BUILD_ARCH" "before"
        if test "$ENABLE_JAVA" != ""; then
            if test -d "$JAVA_HOME/jre/bin/client"; then
                pathmunge "$JAVA_HOME/jre/bin/client" "before"
            fi
            if test -d "$JAVA_HOME/jre/bin/hotspot"; then
                pathmunge "$JAVA_HOME/jre/bin/hotspot" "before"
            fi
            pathmunge "$JAVA_HOME/bin" "before"
        fi
        pathmunge "$MSVC_HOST_PATH" "before"
        ;;

    solaris*)
        pathmunge "/usr/css/bin" "before"
        if test "$ENABLE_JAVA" != ""; then
            pathmunge "$JAVA_HOME/bin" "after"
        fi
        ;;
    esac
fi

AC_SUBST(LO_PATH)

# Allow to pass LO_ELFCHECK_ALLOWLIST from autogen.input to bin/check-elf-dynamic-objects:
if test "$LO_ELFCHECK_ALLOWLIST" = x || test "${LO_ELFCHECK_ALLOWLIST-x}" != x; then
    x_LO_ELFCHECK_ALLOWLIST=
else
    x_LO_ELFCHECK_ALLOWLIST=[\#]
fi
AC_SUBST(x_LO_ELFCHECK_ALLOWLIST)
AC_SUBST(LO_ELFCHECK_ALLOWLIST)

libo_FUZZ_SUMMARY

# Generate a configuration sha256 we can use for deps
if test -f config_host.mk; then
    config_sha256=`$SHA256SUM config_host.mk | sed "s/ .*//"`
fi
if test -f config_host_lang.mk; then
    config_lang_sha256=`$SHA256SUM config_host_lang.mk | sed "s/ .*//"`
fi

CFLAGS=$my_original_CFLAGS
CXXFLAGS=$my_original_CXXFLAGS
CPPFLAGS=$my_original_CPPFLAGS

AC_CONFIG_LINKS([include:include])

# Keep in sync with list of files far up, at AC_MSG_CHECKING([for
# BUILD platform configuration] - otherwise breaks cross building
AC_CONFIG_FILES([config_host.mk
                 config_host_lang.mk
                 Makefile
                 bin/bffvalidator.sh
                 bin/odfvalidator.sh
                 bin/officeotron.sh
                 hardened_runtime.xcent
                 instsetoo_native/util/openoffice.lst
                 sysui/desktop/macosx/Info.plist
                 vs-code-template.code-workspace:.vscode/vs-code-template.code-workspace.in])
AC_CONFIG_HEADERS([config_host/config_buildid.h])
AC_CONFIG_HEADERS([config_host/config_box2d.h])
AC_CONFIG_HEADERS([config_host/config_clang.h])
AC_CONFIG_HEADERS([config_host/config_crypto.h])
AC_CONFIG_HEADERS([config_host/config_dconf.h])
AC_CONFIG_HEADERS([config_host/config_eot.h])
AC_CONFIG_HEADERS([config_host/config_extensions.h])
AC_CONFIG_HEADERS([config_host/config_cairo_canvas.h])
AC_CONFIG_HEADERS([config_host/config_cxxabi.h])
AC_CONFIG_HEADERS([config_host/config_dbus.h])
AC_CONFIG_HEADERS([config_host/config_features.h])
AC_CONFIG_HEADERS([config_host/config_feature_desktop.h])
AC_CONFIG_HEADERS([config_host/config_feature_opencl.h])
AC_CONFIG_HEADERS([config_host/config_firebird.h])
AC_CONFIG_HEADERS([config_host/config_folders.h])
AC_CONFIG_HEADERS([config_host/config_fuzzers.h])
AC_CONFIG_HEADERS([config_host/config_gio.h])
AC_CONFIG_HEADERS([config_host/config_global.h])
AC_CONFIG_HEADERS([config_host/config_gpgme.h])
AC_CONFIG_HEADERS([config_host/config_java.h])
AC_CONFIG_HEADERS([config_host/config_langs.h])
AC_CONFIG_HEADERS([config_host/config_lgpl.h])
AC_CONFIG_HEADERS([config_host/config_libcxx.h])
AC_CONFIG_HEADERS([config_host/config_liblangtag.h])
AC_CONFIG_HEADERS([config_host/config_locales.h])
AC_CONFIG_HEADERS([config_host/config_mpl.h])
AC_CONFIG_HEADERS([config_host/config_oox.h])
AC_CONFIG_HEADERS([config_host/config_options.h])
AC_CONFIG_HEADERS([config_host/config_options_calc.h])
AC_CONFIG_HEADERS([config_host/config_zxing.h])
AC_CONFIG_HEADERS([config_host/config_skia.h])
AC_CONFIG_HEADERS([config_host/config_typesizes.h])
AC_CONFIG_HEADERS([config_host/config_vendor.h])
AC_CONFIG_HEADERS([config_host/config_vcl.h])
AC_CONFIG_HEADERS([config_host/config_vclplug.h])
AC_CONFIG_HEADERS([config_host/config_version.h])
AC_CONFIG_HEADERS([config_host/config_oauth2.h])
AC_CONFIG_HEADERS([config_host/config_poppler.h])
AC_CONFIG_HEADERS([config_host/config_python.h])
AC_CONFIG_HEADERS([config_host/config_writerperfect.h])
AC_CONFIG_HEADERS([solenv/lockfile/autoconf.h])
AC_OUTPUT

if test "$CROSS_COMPILING" = TRUE; then
    (echo; echo export BUILD_TYPE_FOR_HOST=$BUILD_TYPE) >>config_build.mk
fi

# touch the config timestamp file
if test ! -f config_host.mk.stamp; then
    echo > config_host.mk.stamp
elif test "$config_sha256" = `$SHA256SUM config_host.mk | sed "s/ .*//"`; then
    echo "Host Configuration unchanged - avoiding scp2 stamp update"
else
    echo > config_host.mk.stamp
fi

# touch the config lang timestamp file
if test ! -f config_host_lang.mk.stamp; then
    echo > config_host_lang.mk.stamp
elif test "$config_lang_sha256" = `$SHA256SUM config_host_lang.mk | sed "s/ .*//"`; then
    echo "Language Configuration unchanged - avoiding scp2 stamp update"
else
    echo > config_host_lang.mk.stamp
fi


if test \( "$STALE_MAKE" = "TRUE" -o "$HAVE_GNUMAKE_FILE_FUNC" != "TRUE" \) \
        -a "$build_os" = "cygwin"; then

cat << _EOS
****************************************************************************
WARNING:
Your make version is known to be horribly slow, and hard to debug
problems with. To get a reasonably functional make please do:

to install a pre-compiled binary make for Win32

 mkdir -p /opt/lo/bin
 cd /opt/lo/bin
 wget https://dev-www.libreoffice.org/bin/cygwin/make-4.2.1-msvc.exe
 cp make-4.2.1-msvc.exe make
 chmod +x make

to install from source:
place yourself in a working directory of you choice.

 git clone git://git.savannah.gnu.org/make.git

 [go to Start menu, open "Visual Studio 2019" or "Visual Studio 2022", and then click "x86 Native Tools Command Prompt" or "x64 Native Tools Command Prompt"]
 set PATH=%PATH%;C:\Cygwin\bin
 [or Cygwin64, if that is what you have]
 cd path-to-make-repo-you-cloned-above
 build_w32.bat --without-guile

should result in a WinRel/gnumake.exe.
Copy it to the Cygwin /opt/lo/bin directory as make.exe

Then re-run autogen.sh

Note: autogen.sh will try to use /opt/lo/bin/make if the environment variable GNUMAKE is not already defined.
Alternatively, you can install the 'new' make where ever you want and make sure that `which make` finds it.

_EOS
if test "$HAVE_GNUMAKE_FILE_FUNC" != "TRUE"; then
    AC_MSG_ERROR([no file function found; the build will fail without it; use GNU make 4.0 or later])
fi
fi


cat << _EOF
****************************************************************************

To build, run:
$GNUMAKE

To view some help, run:
$GNUMAKE help

_EOF

if test $_os != WINNT -a "$CROSS_COMPILING" != TRUE; then
    cat << _EOF
After the build has finished successfully, you can immediately run what you built using the command:
_EOF

    if test $_os = Darwin; then
        echo open instdir/$PRODUCTNAME_WITHOUT_SPACES.app
    else
        echo instdir/program/soffice
    fi
    cat << _EOF

If you want to run the smoketest, run:
$GNUMAKE check

_EOF
fi

if test -s "$WARNINGS_FILE_FOR_BUILD"; then
    echo "BUILD / cross-toolset config, repeated ($WARNINGS_FILE_FOR_BUILD)"
    cat "$WARNINGS_FILE_FOR_BUILD"
    echo
fi

if test -s "$WARNINGS_FILE"; then
    echo "HOST config ($WARNINGS_FILE)"
    cat "$WARNINGS_FILE"
fi

dnl vim:set shiftwidth=4 softtabstop=4 expandtab:
-------------- next part --------------
 # config variable for LibreOffice
 # this file is intended to be able to be included in a Makefile
 # and not to be sourced in a shell session
 #

# Horrible hack to prepend spaces to expansions
# Spaces are usually eaten by make parser but not if variable expands to space.
# Space prefix is desirable because system CFLAGS may be completely empty,
# which means that the variables defined here would need extra twiddling
# to get them into invoked external configures and override pkg-config there.
gb_SPACE:=$(gb_SPACE) $(gb_SPACE)
export SRC_ROOT=@SRC_ROOT@
export BUILDDIR=@BUILDDIR@

@x_AFLAGS@ export AFLAGS=@AFLAGS@
export ABW_CFLAGS=$(gb_SPACE)@ABW_CFLAGS@
export ABW_LIBS=$(gb_SPACE)@ABW_LIBS@
export ANDROID_NDK_HOME=@ANDROID_NDK_HOME@
export ANDROID_APP_ABI=@ANDROID_APP_ABI@
export ANDROID_SDK_HOME=@ANDROID_SDK_HOME@
export ANDROID_PACKAGE_NAME=@ANDROID_PACKAGE_NAME@
export ANDROID_BINUTILS_PREBUILT_ROOT=@ANDROID_BINUTILS_PREBUILT_ROOT@
export ANDROID_GCC_TOOLCHAIN_VERSION=@ANDROID_GCC_TOOLCHAIN_VERSION@
export ANT=@ANT@
export ANT_HOME=@ANT_HOME@
export ANT_LIB=@ANT_LIB@
export APR_CFLAGS=$(gb_SPACE)@APR_CFLAGS@
export APR_LIBS=$(gb_SPACE)@APR_LIBS@
export AR=@AR@
export ASSERT_ALWAYS_ABORT=@ASSERT_ALWAYS_ABORT@
export ATL_INCLUDE=@ATL_INCLUDE@
export ATL_LIB=@ATL_LIB@
export ATOMIC_LIB=@ATOMIC_LIB@
export AVAHI_CFLAGS=$(gb_SPACE)@AVAHI_CFLAGS@
export AVAHI_LIBS=$(gb_SPACE)@AVAHI_LIBS@
export LIBATOMIC_OPS_CFLAGS=$(gb_SPACE)@LIBATOMIC_OPS_CFLAGS@
export LIBATOMIC_OPS_LIBS=$(gb_SPACE)@LIBATOMIC_OPS_LIBS@
export BINDIR=@BINDIR@
export BISON=@BISON@
export BOOST_CPPFLAGS=@BOOST_CPPFLAGS@
export BOOST_CXXFLAGS=@BOOST_CXXFLAGS@
export BOOST_LOCALE_LIB=@BOOST_LOCALE_LIB@
export BOOST_DATE_TIME_LIB=@BOOST_DATE_TIME_LIB@
export BOOST_FILESYSTEM_LIB=@BOOST_FILESYSTEM_LIB@
export BOOST_IOSTREAMS_LIB=@BOOST_IOSTREAMS_LIB@
export BOOST_LDFLAGS=@BOOST_LDFLAGS@
export BOOST_SYSTEM_LIB=@BOOST_SYSTEM_LIB@
export BOX2D_CFLAGS=@BOX2D_CFLAGS@
export BOX2D_LIBS=@BOX2D_LIBS@
export BRAND_INTRO_IMAGES=@BRAND_INTRO_IMAGES@
export BREAKPAD_SYMBOL_CONFIG=@BREAKPAD_SYMBOL_CONFIG@
export BSH_JAR=@BSH_JAR@
export BUILD_PLATFORM=@build@
export BUILD_POSTGRESQL_SDBC=@BUILD_POSTGRESQL_SDBC@
export BUILD_TYPE=@BUILD_TYPE@
export BUILD_X64=@BUILD_X64@
export BUILD_X86=@BUILD_X86@
export BUILDING_PCH_WITH_OBJ=@BUILDING_PCH_WITH_OBJ@
export BZIP2_CFLAGS=$(gb_SPACE)@BZIP2_CFLAGS@
export BZIP2_LIBS=$(gb_SPACE)@BZIP2_LIBS@
export CAIRO_CFLAGS=$(gb_SPACE)@CAIRO_CFLAGS@
export CAIRO_LIBS=$(gb_SPACE)@CAIRO_LIBS@
export CC=@CC@
export CC_FOR_BUILD=@CC_FOR_BUILD@
export CCACHE_DEPEND_MODE=@CCACHE_DEPEND_MODE@
export CDR_CFLAGS=$(gb_SPACE)@CDR_CFLAGS@
export CDR_LIBS=$(gb_SPACE)@CDR_LIBS@
@x_CFLAGS@ export CFLAGS=@CFLAGS@
export CLANG_USE_LD=@CLANG_USE_LD@
export CLANGDIR=@CLANGDIR@
export CLANGLIBDIR=@CLANGLIBDIR@
export CLANGSYSINCLUDE=@CLANGSYSINCLUDE@
export CLANGTOOLLIBS=@CLANGTOOLLIBS@
export CLUCENE_CFLAGS=$(gb_SPACE)@CLUCENE_CFLAGS@
export CLUCENE_LIBS=$(gb_SPACE)@CLUCENE_LIBS@
export LIBCMIS_CFLAGS=$(gb_SPACE)@LIBCMIS_CFLAGS@
export LIBCMIS_LIBS=$(gb_SPACE)@LIBCMIS_LIBS@
export COM=@COM@
export COMPATH=@COMPATH@
export COMPILER_PLUGINS=@COMPILER_PLUGINS@
export COMPILER_PLUGINS_ANALYZER_PCH=@COMPILER_PLUGINS_ANALYZER_PCH@
export COMPILER_PLUGINS_COM_IS_CLANG=@COMPILER_PLUGINS_COM_IS_CLANG@
export COMPILER_PLUGINS_CXX=@COMPILER_PLUGINS_CXX@
export COMPILER_PLUGINS_CXXFLAGS=@COMPILER_PLUGINS_CXXFLAGS@
export COMPILER_PLUGINS_CXX_LINKFLAGS=@COMPILER_PLUGINS_CXX_LINKFLAGS@
export COMPILER_PLUGINS_DEBUG=@COMPILER_PLUGINS_DEBUG@
export COMPILER_PLUGINS_TOOLING_ARGS=@COMPILER_PLUGINS_TOOLING_ARGS@
export COM_IS_CLANG=@COM_IS_CLANG@
export CPPU_ENV=@CPPU_ENV@
export CPPU_ENV_FOR_BUILD=@CPPU_ENV_FOR_BUILD@
export CPPUNIT_CFLAGS=$(gb_SPACE)@CPPUNIT_CFLAGS@
export CPPUNIT_LIBS=$(gb_SPACE)@CPPUNIT_LIBS@
export CPUNAME=@CPUNAME@
export CROSS_COMPILING=@CROSS_COMPILING@
export CUCKOO_CFLAGS=$(gb_SPACE)@CUCKOO_CFLAGS@
export CURL=@CURL@
export CURL_CFLAGS=$(gb_SPACE)@CURL_CFLAGS@
export CURL_LIBS=$(gb_SPACE)@CURL_LIBS@
export CUSTOM_BRAND_DIR=@CUSTOM_BRAND_DIR@
export CUSTOM_BRAND_IMAGES=@CUSTOM_BRAND_IMAGES@
export CXX=@CXX@
export CXX_FOR_BUILD=@CXX_FOR_BUILD@
export CXX_X64_BINARY=@CXX_X64_BINARY@
export CXX_X86_BINARY=@CXX_X86_BINARY@
@x_CXXFLAGS@ export CXXFLAGS=@CXXFLAGS@
export CXXFLAGS_CXX11=@CXXFLAGS_CXX11@
export CXXFLAGS_INTRINSICS_SSE2=@CXXFLAGS_INTRINSICS_SSE2@
export CXXFLAGS_INTRINSICS_SSSE3=@CXXFLAGS_INTRINSICS_SSSE3@
export CXXFLAGS_INTRINSICS_SSE41=@CXXFLAGS_INTRINSICS_SSE41@
export CXXFLAGS_INTRINSICS_SSE42=@CXXFLAGS_INTRINSICS_SSE42@
export CXXFLAGS_INTRINSICS_AVX=@CXXFLAGS_INTRINSICS_AVX@
export CXXFLAGS_INTRINSICS_AVX2=@CXXFLAGS_INTRINSICS_AVX2@
export CXXFLAGS_INTRINSICS_AVX512=@CXXFLAGS_INTRINSICS_AVX512@
export CXXFLAGS_INTRINSICS_AVX512F=@CXXFLAGS_INTRINSICS_AVX512F@
export CXXFLAGS_INTRINSICS_F16C=@CXXFLAGS_INTRINSICS_F16C@
export CXXFLAGS_INTRINSICS_FMA=@CXXFLAGS_INTRINSICS_FMA@
export DATADIR=@DATADIR@
export DBUS_CFLAGS=$(gb_SPACE)@DBUS_CFLAGS@
export DBUS_LIBS=$(gb_SPACE)@DBUS_LIBS@
export DBUS_GLIB_CFLAGS=$(gb_SPACE)@DBUS_GLIB_CFLAGS@
export DBUS_GLIB_LIBS=$(gb_SPACE)@DBUS_GLIB_LIBS@
export DBUS_HAVE_GLIB=@DBUS_HAVE_GLIB@
export DCONF_CFLAGS=@DCONF_CFLAGS@
export DCONF_LIBS=@DCONF_LIBS@
export DEFAULT_BRAND_IMAGES=@DEFAULT_BRAND_IMAGES@
export DICT_SYSTEM_DIR=@DICT_SYSTEM_DIR@
export DISABLE_CVE_TESTS=@DISABLE_CVE_TESTS@
export DISABLE_DYNLOADING=@DISABLE_DYNLOADING@
export DISABLE_PYTHON=@DISABLE_PYTHON@
export DLOPEN_LIBS=@DLOPEN_LIBS@
export DOCDIR=@DOCDIR@
export DOXYGEN=@DOXYGEN@
export DO_FETCH_TARBALLS=@DO_FETCH_TARBALLS@
export DPKG=@DPKG@
export EBOOK_CFLAGS=$(gb_SPACE)@EBOOK_CFLAGS@
export EBOOK_LIBS=$(gb_SPACE)@EBOOK_LIBS@
export ENABLE_ANDROID_LOK=@ENABLE_ANDROID_LOK@
export ENABLE_ANDROID_EDITING=@ENABLE_ANDROID_EDITING@
export ENABLE_AVAHI=@ENABLE_AVAHI@
export ENABLE_BREAKPAD=@ENABLE_BREAKPAD@
export DEFAULT_CRASHDUMP_VALUE=@DEFAULT_CRASHDUMP_VALUE@
export ENABLE_CAIRO_CANVAS=@ENABLE_CAIRO_CANVAS@
export ENABLE_CHART_TESTS=@ENABLE_CHART_TESTS@
export ENABLE_CIPHER_OPENSSL_BACKEND=@ENABLE_CIPHER_OPENSSL_BACKEND@
export ENABLE_LIBCMIS=@ENABLE_LIBCMIS@
export ENABLE_COINMP=@ENABLE_COINMP@
export SYSTEM_COINMP=@SYSTEM_COINMP@
export COINMP_CFLAGS=@COINMP_CFLAGS@
export COINMP_LIBS=@COINMP_LIBS@
export ENABLE_CUPS=@ENABLE_CUPS@
export ENABLE_CURL=@ENABLE_CURL@
export ENABLE_DBGUTIL=@ENABLE_DBGUTIL@
export ENABLE_DBUS=@ENABLE_DBUS@
export ENABLE_DCONF=@ENABLE_DCONF@
export ENABLE_DEBUG=@ENABLE_DEBUG@
export ENABLE_EOT=@ENABLE_EOT@
export ENABLE_EVOAB2=@ENABLE_EVOAB2@
export ENABLE_FIREBIRD_SDBC=@ENABLE_FIREBIRD_SDBC@
export ENABLE_FORMULA_LOGGER=@ENABLE_FORMULA_LOGGER@
export ENABLE_GDB_INDEX=@ENABLE_GDB_INDEX@
export ENABLE_GIO=@ENABLE_GIO@
export ENABLE_GPGMEPP=@ENABLE_GPGMEPP@
export ENABLE_GSTREAMER_1_0=@ENABLE_GSTREAMER_1_0@
export ENABLE_GTK3=@ENABLE_GTK3@
export ENABLE_GTK4=@ENABLE_GTK4@
export DISABLE_GUI=@DISABLE_GUI@
export ENABLE_HEADLESS=@ENABLE_HEADLESS@
export ENABLE_HTMLHELP=@ENABLE_HTMLHELP@
export ENABLE_JAVA=@ENABLE_JAVA@
export ENABLE_LDAP=@ENABLE_LDAP@
export ENABLE_LPSOLVE=@ENABLE_LPSOLVE@
export ENABLE_LTO=@ENABLE_LTO@
export ENABLE_LWP=@ENABLE_LWP@
export ENABLE_MACOSX_SANDBOX=@ENABLE_MACOSX_SANDBOX@
export ENABLE_MEDIAWIKI=@ENABLE_MEDIAWIKI@
export ENABLE_MARIADBC=@ENABLE_MARIADBC@
export ENABLE_NSS=@ENABLE_NSS@
export ENABLE_ONLINE_UPDATE=@ENABLE_ONLINE_UPDATE@
export ENABLE_ONLINE_UPDATE_MAR=@ENABLE_ONLINE_UPDATE_MAR@
export ENABLE_EXTENSION_UPDATE=@ENABLE_EXTENSION_UPDATE@
export ENABLE_OOENV=@ENABLE_OOENV@
export ENABLE_OPENGL_TRANSITIONS=@ENABLE_OPENGL_TRANSITIONS@
export ENABLE_OPENGL_CANVAS=@ENABLE_OPENGL_CANVAS@
export ENABLE_OPENSSL=@ENABLE_OPENSSL@
export ENABLE_OPTIMIZED=@ENABLE_OPTIMIZED@
export ENABLE_OPTIMIZED_DEBUG=@ENABLE_OPTIMIZED_DEBUG@
export ENABLE_PCH=@ENABLE_PCH@
export ENABLE_PDFIMPORT=@ENABLE_PDFIMPORT@
export ENABLE_PDFIUM=@ENABLE_PDFIUM@
export ENABLE_POPPLER=@ENABLE_POPPLER@
export ENABLE_QT5=@ENABLE_QT5@
export ENABLE_QT6=@ENABLE_QT6@
export ENABLE_KF5=@ENABLE_KF5@
export ENABLE_GTK3_KDE5=@ENABLE_GTK3_KDE5@
export ENABLE_RANDR=@ENABLE_RANDR@
export ENABLE_RELEASE_BUILD=@ENABLE_RELEASE_BUILD@
export ENABLE_REPORTBUILDER=@ENABLE_REPORTBUILDER@
export ENABLE_RUNTIME_OPTIMIZATIONS=@ENABLE_RUNTIME_OPTIMIZATIONS@
export ENABLE_SAL_LOG=@ENABLE_SAL_LOG@
export ENABLE_SCRIPTING_BEANSHELL=@ENABLE_SCRIPTING_BEANSHELL@
export ENABLE_SCRIPTING_JAVASCRIPT=@ENABLE_SCRIPTING_JAVASCRIPT@
export ENABLE_SDREMOTE=@ENABLE_SDREMOTE@
export ENABLE_SDREMOTE_BLUETOOTH=@ENABLE_SDREMOTE_BLUETOOTH@
export ENABLE_SERVICES_RDB_FROM_BUILD=@ENABLE_SERVICES_RDB_FROM_BUILD@
export ENABLE_SILENT_MSI=@ENABLE_SILENT_MSI@
export ENABLE_SKIA=@ENABLE_SKIA@
export ENABLE_SKIA_DEBUG=@ENABLE_SKIA_DEBUG@
export ENABLE_SYMBOLS_FOR=@ENABLE_SYMBOLS_FOR@
export ENABLE_VALGRIND=@ENABLE_VALGRIND@
export ENABLE_WASM_STRIP=@ENABLE_WASM_STRIP@
export ENABLE_WERROR=@ENABLE_WERROR@
export ENABLE_Z7_DEBUG=@ENABLE_Z7_DEBUG@
export ENDIANNESS=@ENDIANNESS@
export EPM=@EPM@
export EPM_FLAGS=@EPM_FLAGS@
export EPUBGEN_CFLAGS=$(gb_SPACE)@EPUBGEN_CFLAGS@
export EPUBGEN_LIBS=$(gb_SPACE)@EPUBGEN_LIBS@
export ETONYEK_CFLAGS=$(gb_SPACE)@ETONYEK_CFLAGS@
export ETONYEK_LIBS=$(gb_SPACE)@ETONYEK_LIBS@
export debug=@ENABLE_DEBUG@
export FIND=@FIND@
export FIREBIRD_CFLAGS=$(gb_SPACE)@FIREBIRD_CFLAGS@
export FIREBIRD_LIBS=$(gb_SPACE)@FIREBIRD_LIBS@
export FLEX=@FLEX@
export FLUTE_JAR=@FLUTE_JAR@
export FONTCONFIG_CFLAGS=$(gb_SPACE)@FONTCONFIG_CFLAGS@
export FONTCONFIG_LIBS=$(gb_SPACE)@FONTCONFIG_LIBS@
export FONTFORGE=@FONTFORGE@
export FREEHAND_CFLAGS=$(gb_SPACE)@FREEHAND_CFLAGS@
export FREEHAND_LIBS=$(gb_SPACE)@FREEHAND_LIBS@
export FREETYPE_CFLAGS=$(gb_SPACE)@FREETYPE_CFLAGS@
export FREETYPE_LIBS=$(gb_SPACE)@FREETYPE_LIBS@
export GCC_VERSION=@GCC_VERSION@
export GIO_CFLAGS=$(gb_SPACE)@GIO_CFLAGS@
export GIO_LIBS=$(gb_SPACE)@GIO_LIBS@
export GIT_REFERENCE_SRC=@GIT_REFERENCE_SRC@
export GIT_LINK_SRC=@GIT_LINK_SRC@
export GIT_NEEDED_SUBMODULES=@GIT_NEEDED_SUBMODULES@
export EPOXY_CFLAGS=$(gb_SPACE)@EPOXY_CFLAGS@
export EPOXY_LIBS=$(gb_SPACE)@EPOXY_LIBS@
export GLM_CFLAGS=$(gb_SPACE)@GLM_CFLAGS@
export GPG_ERROR_CFLAGS=$(gb_SPACE)@GPG_ERROR_CFLAGS@
export GPG_ERROR_LIBS=$(gb_SPACE)@GPG_ERROR_LIBS@
export GPGMEPP_CFLAGS=$(gb_SPACE)@GPGMEPP_CFLAGS@
export GPGMEPP_LIBS=$(gb_SPACE)@GPGMEPP_LIBS@
export GNUTLS_CFLAGS=$(gb_SPACE)@GNUTLS_CFLAGS@
export GNUTLS_LIBS=$(gb_SPACE)@GNUTLS_LIBS@
export PARALLELISM?=@PARALLELISM@
@x_GNUCP@ export GNUCOPY=@GNUCP@
export GNUPATCH=@GNUPATCH@
export GNUTAR=@GNUTAR@
export GOBJECT_CFLAGS=$(gb_SPACE)@GOBJECT_CFLAGS@
export GOBJECT_LIBS=$(gb_SPACE)@GOBJECT_LIBS@
export GPERF=@GPERF@
export GRAPHITE_CFLAGS=$(gb_SPACE)@GRAPHITE_CFLAGS@
export GRAPHITE_LIBS=$(gb_SPACE)@GRAPHITE_LIBS@
export HARFBUZZ_CFLAGS=$(gb_SPACE)@HARFBUZZ_CFLAGS@
export HARFBUZZ_LIBS=$(gb_SPACE)@HARFBUZZ_LIBS@
@x_Cygwin@ export GREP=@WIN_GREP@
export GSSAPI_LIBS=@GSSAPI_LIBS@
export GSTREAMER_1_0_CFLAGS=$(gb_SPACE)@GSTREAMER_1_0_CFLAGS@
export GSTREAMER_1_0_LIBS=$(gb_SPACE)@GSTREAMER_1_0_LIBS@
export GTK3_CFLAGS=$(gb_SPACE)@GTK3_CFLAGS@
export GTK3_LIBS=$(gb_SPACE)@GTK3_LIBS@
export GTK4_CFLAGS=$(gb_SPACE)@GTK4_CFLAGS@
export GTK4_LIBS=$(gb_SPACE)@GTK4_LIBS@
export LIBADWAITA_CFLAGS=$(gb_SPACE)@LIBADWAITA_CFLAGS@
export LIBADWAITA_LIBS=$(gb_SPACE)@LIBADWAITA_LIBS@
export USING_X11=@USING_X11@
export HAMCREST_JAR=@HAMCREST_JAR@
export HAVE_BROKEN_GCC_WMAYBE_UNINITIALIZED=@HAVE_BROKEN_GCC_WMAYBE_UNINITIALIZED@
export HAVE_BROKEN_GCC_WSTRINGOP_OVERFLOW=@HAVE_BROKEN_GCC_WSTRINGOP_OVERFLOW@
export HAVE_CLANG_DEBUG_INFO_KIND_CONSTRUCTOR=@HAVE_CLANG_DEBUG_INFO_KIND_CONSTRUCTOR@
export HAVE_CXX20_ATOMIC_REF=@HAVE_CXX20_ATOMIC_REF@
export HAVE_DLLEXPORTINLINES=@HAVE_DLLEXPORTINLINES@
export HAVE_LO_CLANG_DLLEXPORTINLINES=@HAVE_LO_CLANG_DLLEXPORTINLINES@
export HAVE_GCC_AVX=@HAVE_GCC_AVX@
export HAVE_GCC_BUILTIN_ATOMIC=@HAVE_GCC_BUILTIN_ATOMIC@
export HAVE_GCC_FNO_ENFORCE_EH_SPECS=@HAVE_GCC_FNO_ENFORCE_EH_SPECS@
export HAVE_GCC_FNO_SIZED_DEALLOCATION=@HAVE_GCC_FNO_SIZED_DEALLOCATION@
export HAVE_GCC_GGDB2=@HAVE_GCC_GGDB2@
export HAVE_GCC_SPLIT_DWARF=@HAVE_GCC_SPLIT_DWARF@
export HAVE_GCC_STACK_CLASH_PROTECTION=@HAVE_GCC_STACK_CLASH_PROTECTION@
export HAVE_GNUMAKE_FILE_FUNC=@HAVE_GNUMAKE_FILE_FUNC@
export HAVE_LD_BSYMBOLIC_FUNCTIONS=@HAVE_LD_BSYMBOLIC_FUNCTIONS@
export HAVE_LD_HASH_STYLE=@HAVE_LD_HASH_STYLE@
export HAVE_LIBSTDCPP=@HAVE_LIBSTDCPP@
export HAVE_POSIX_FALLOCATE=@HAVE_POSIX_FALLOCATE@
export HAVE_WDEPRECATED_COPY_DTOR=@HAVE_WDEPRECATED_COPY_DTOR@
export HELP_ONLINE=@HELP_ONLINE@
export HELP_OMINDEX_PAGE=@HELP_OMINDEX_PAGE@
export HOST_PLATFORM=@HOST_PLATFORM@
export HSQLDB_JAR=@HSQLDB_JAR@
export HSQLDB_USE_JDBC_4_1=@HSQLDB_USE_JDBC_4_1@
export HUNSPELL_CFLAGS=$(gb_SPACE)@HUNSPELL_CFLAGS@
export HUNSPELL_LIBS=$(gb_SPACE)@HUNSPELL_LIBS@
export HYPHEN_LIB=$(gb_SPACE)@HYPHEN_LIB@
export HYPH_SYSTEM_DIR=@HYPH_SYSTEM_DIR@
export ICECREAM_RUN=@ICECREAM_RUN@
@x_ICECC_VERSION@ export ICECC_VERSION=@ICECC_VERSION@
export ICU_CFLAGS=$(gb_SPACE)@ICU_CFLAGS@
export ICU_LIBS=$(gb_SPACE)@ICU_LIBS@
export ICU_MAJOR=@ICU_MAJOR@
export ICU_MINOR=@ICU_MINOR@
export ICU_RECLASSIFIED_CONDITIONAL_JAPANESE_STARTER=@ICU_RECLASSIFIED_CONDITIONAL_JAPANESE_STARTER@
export ICU_RECLASSIFIED_HEBREW_LETTER=@ICU_RECLASSIFIED_HEBREW_LETTER@
export ICU_RECLASSIFIED_PREPEND_SET_EMPTY=@ICU_RECLASSIFIED_PREPEND_SET_EMPTY@
export ICU_UCHAR_TYPE=@ICU_UCHAR_TYPE@
export INTROSPECTION_SCANNER=@INTROSPECTION_SCANNER@
export ILIB=@ILIB@
export ILIB_FOR_BUILD=@ILIB_FOR_BUILD@
export INSTALLDIR=@INSTALLDIR@
export INSTALLDIRNAME=@INSTALLDIRNAME@
export INSTALL_NAME_TOOL=@INSTALL_NAME_TOOL@
export INSTDIR=@INSTDIR@
export INSTDIR_FOR_BUILD=@INSTDIR_FOR_BUILD@
export INSTROOT=@INSTROOT@
export INSTROOTBASE=@INSTROOTBASE@
export INSTROOT_FOR_BUILD=@INSTROOT_FOR_BUILD@
export IWYU_PATH=@IWYU_PATH@
export JAVACOMPILER=@JAVACOMPILER@
export JAVADOC=@JAVADOC@
export JAVADOCISGJDOC=@JAVADOCISGJDOC@
export JAVACFLAGS=@JAVACFLAGS@
export JAVAIFLAGS=@JAVAIFLAGS@
export JAVAIFLAGS_FOR_BUILD=@JAVAIFLAGS_FOR_BUILD@
export JAVA_CLASSPATH_NOT_SET=@JAVA_CLASSPATH_NOT_SET@
export JAVAINTERPRETER=@JAVAINTERPRETER@
export JAVA_HOME=@JAVA_HOME@
export JAVA_HOME_FOR_BUILD=@JAVA_HOME_FOR_BUILD@
export JAVA_SOURCE_VER=@JAVA_SOURCE_VER@
export JAVA_TARGET_VER=@JAVA_TARGET_VER@
export JAWTLIB=@JAWTLIB@
export JDK=@JDK@
export JDK_FOR_BUILD=@JDK_FOR_BUILD@
export JFREEREPORT_JAR=@JFREEREPORT_JAR@
export JITC_PROCESSOR_TYPE=@JITC_PROCESSOR_TYPE@
export JVM_ONE_PATH_CHECK=@JVM_ONE_PATH_CHECK@
export KF5_CFLAGS=$(gb_SPACE)@KF5_CFLAGS@
export KF5_LIBS=$(gb_SPACE)@KF5_LIBS@
export KRB5_LIBS=@KRB5_LIBS@
export LCMS2_CFLAGS=$(gb_SPACE)@LCMS2_CFLAGS@
export LCMS2_LIBS=$(gb_SPACE)@LCMS2_LIBS@
export LD=@LD@
export LD_GC_SECTIONS=@LD_GC_SECTIONS@
export LD_PLUGIN=@LD_PLUGIN@
@x_LDFLAGS@ export LDFLAGS=@LDFLAGS@
export LFS_CFLAGS=@LFS_CFLAGS@
export LIBASSUAN_CFLAGS=$(gb_SPACE)@LIBASSUAN_CFLAGS@
export LIBASSUAN_LIBS=$(gb_SPACE)@LIBASSUAN_LIBS@
export LIBBASE_JAR=@LIBBASE_JAR@
export LIBDIR=@LIBDIR@
export LIBEOT_CFLAGS=$(gb_SPACE)@LIBEOT_CFLAGS@
export LIBEOT_LIBS=$(gb_SPACE)@LIBEOT_LIBS@
export LIBEXSLT_CFLAGS=$(gb_SPACE)@LIBEXSLT_CFLAGS@
export LIBEXSLT_LIBS=$(gb_SPACE)@LIBEXSLT_LIBS@
export LIBEXTTEXTCAT_CFLAGS=$(gb_SPACE)@LIBEXTTEXTCAT_CFLAGS@
export LIBEXTTEXTCAT_LIBS=$(gb_SPACE)@LIBEXTTEXTCAT_LIBS@
export LIBFONTS_JAR=@LIBFONTS_JAR@
export LIBFORMULA_JAR=@LIBFORMULA_JAR@
export LIBGCRYPT_CFLAGS=@LIBGCRYPT_CFLAGS@
export LIBGCRYPT_LIBS=@LIBGCRYPT_LIBS@
export LIBJPEG_CFLAGS=$(gb_SPACE)@LIBJPEG_CFLAGS@
export LIBJPEG_LIBS=$(gb_SPACE)@LIBJPEG_LIBS@
export LIBLANGTAG_CFLAGS=$(gb_SPACE)@LIBLANGTAG_CFLAGS@
export LIBLANGTAG_LIBS=$(gb_SPACE)@LIBLANGTAG_LIBS@
export LIBLAYOUT_JAR=@LIBLAYOUT_JAR@
export LIBLOADER_JAR=@LIBLOADER_JAR@
export LIBNUMBERTEXT_CFLAGS=$(gb_SPACE)@LIBNUMBERTEXT_CFLAGS@
export LIBNUMBERTEXT_LIBS=$(gb_SPACE)@LIBNUMBERTEXT_LIBS@
export LIB_FUZZING_ENGINE=@LIB_FUZZING_ENGINE@
export LIBO_BIN_FOLDER=@LIBO_BIN_FOLDER@
export LIBO_BIN_FOLDER_FOR_BUILD=@LIBO_BIN_FOLDER_FOR_BUILD@
export LIBO_ETC_FOLDER=@LIBO_ETC_FOLDER@
export LIBO_LIB_FOLDER=@LIBO_LIB_FOLDER@
export LIBO_LIB_FOLDER_FOR_BUILD=@LIBO_LIB_FOLDER_FOR_BUILD@
export LIBO_LIB_PYUNO_FOLDER=@LIBO_LIB_PYUNO_FOLDER@
export LIBO_SHARE_FOLDER=@LIBO_SHARE_FOLDER@
export LIBO_SHARE_HELP_FOLDER=@LIBO_SHARE_HELP_FOLDER@
export LIBO_SHARE_JAVA_FOLDER=@LIBO_SHARE_JAVA_FOLDER@
export LIBO_SHARE_PRESETS_FOLDER=@LIBO_SHARE_PRESETS_FOLDER@
export LIBO_SHARE_READMES_FOLDER=@LIBO_SHARE_READMES_FOLDER@
export LIBO_SHARE_RESOURCE_FOLDER=@LIBO_SHARE_RESOURCE_FOLDER@
export LIBO_URE_BIN_FOLDER=@LIBO_URE_BIN_FOLDER@
export LIBO_URE_ETC_FOLDER=@LIBO_URE_ETC_FOLDER@
export LIBO_URE_LIB_FOLDER=@LIBO_URE_LIB_FOLDER@
export LIBO_URE_LIB_FOLDER_FOR_BUILD=@LIBO_URE_LIB_FOLDER_FOR_BUILD@
export LIBO_URE_MISC_FOLDER=@LIBO_URE_MISC_FOLDER@
export LIBO_URE_MISC_FOLDER_FOR_BUILD=@LIBO_URE_MISC_FOLDER_FOR_BUILD@
export LIBO_URE_SHARE_JAVA_FOLDER=@LIBO_URE_SHARE_JAVA_FOLDER@
export LIBO_VERSION_MAJOR=@LIBO_VERSION_MAJOR@
export LIBO_VERSION_MICRO=@LIBO_VERSION_MICRO@
export LIBO_VERSION_MINOR=@LIBO_VERSION_MINOR@
export LIBO_VERSION_PATCH=@LIBO_VERSION_PATCH@
export LIBO_VERSION_SUFFIX=@LIBO_VERSION_SUFFIX@
export LIBO_VERSION_SUFFIX_SUFFIX=@LIBO_VERSION_SUFFIX_SUFFIX@
export LIBPNG_CFLAGS=$(gb_SPACE)@LIBPNG_CFLAGS@
export LIBPNG_LIBS=$(gb_SPACE)@LIBPNG_LIBS@
export LIBREPOSITORY_JAR=@LIBREPOSITORY_JAR@
export LIBSERIALIZER_JAR=@LIBSERIALIZER_JAR@
export LIBTOMMATH_CFLAGS=@LIBTOMMATH_CFLAGS@
export LIBTOMMATH_LIBS=@LIBTOMMATH_LIBS@
export LIBTOOL=@LIBTOOL@
export LIBXML_CFLAGS=$(gb_SPACE)@LIBXML_CFLAGS@
export LIBXML_JAR=@LIBXML_JAR@
export LIBXML_LIBS=$(gb_SPACE)@LIBXML_LIBS@
export LIBXSLT_CFLAGS=$(gb_SPACE)@LIBXSLT_CFLAGS@
export LIBXSLT_LIBS=$(gb_SPACE)@LIBXSLT_LIBS@
export LOCKFILE=@LOCKFILE@
export LO_CLANG_CC=@LO_CLANG_CC@
export LO_CLANG_CXX=@LO_CLANG_CXX@
export LO_CLANG_CXXFLAGS_INTRINSICS_SSE2=@LO_CLANG_CXXFLAGS_INTRINSICS_SSE2@
export LO_CLANG_CXXFLAGS_INTRINSICS_SSSE3=@LO_CLANG_CXXFLAGS_INTRINSICS_SSSE3@
export LO_CLANG_CXXFLAGS_INTRINSICS_SSE41=@LO_CLANG_CXXFLAGS_INTRINSICS_SSE41@
export LO_CLANG_CXXFLAGS_INTRINSICS_SSE42=@LO_CLANG_CXXFLAGS_INTRINSICS_SSE42@
export LO_CLANG_CXXFLAGS_INTRINSICS_AVX=@LO_CLANG_CXXFLAGS_INTRINSICS_AVX@
export LO_CLANG_CXXFLAGS_INTRINSICS_AVX2=@LO_CLANG_CXXFLAGS_INTRINSICS_AVX2@
export LO_CLANG_CXXFLAGS_INTRINSICS_AVX512=@LO_CLANG_CXXFLAGS_INTRINSICS_AVX512@
export LO_CLANG_CXXFLAGS_INTRINSICS_AVX512F=@LO_CLANG_CXXFLAGS_INTRINSICS_AVX512F@
export LO_CLANG_CXXFLAGS_INTRINSICS_F16C=@LO_CLANG_CXXFLAGS_INTRINSICS_F16C@
export LO_CLANG_CXXFLAGS_INTRINSICS_FMA=@LO_CLANG_CXXFLAGS_INTRINSICS_FMA@
@x_LO_ELFCHECK_ALLOWLIST@ export LO_ELFCHECK_ALLOWLIST=@LO_ELFCHECK_ALLOWLIST@
@x_Cygwin@ export LS=@WIN_LS@
export MACOSX_BUNDLE_IDENTIFIER=@MACOSX_BUNDLE_IDENTIFIER@
export MACOSX_CODESIGNING_IDENTITY=@MACOSX_CODESIGNING_IDENTITY@
export MACOSX_DEPLOYMENT_TARGET=@MACOSX_DEPLOYMENT_TARGET@
export MACOSX_PACKAGE_SIGNING_IDENTITY=@MACOSX_PACKAGE_SIGNING_IDENTITY@
export MACOSX_SDK_PATH=@MACOSX_SDK_PATH@
export MAC_OS_X_VERSION_MAX_ALLOWED=@MAC_OS_X_VERSION_MAX_ALLOWED@
export MAC_OS_X_VERSION_MIN_REQUIRED=@MAC_OS_X_VERSION_MIN_REQUIRED@
export MANDIR=@MANDIR@
export MARIADBC_MAJOR=@MARIADBC_MAJOR@
export MARIADBC_MICRO=@MARIADBC_MICRO@
export MARIADBC_MINOR=@MARIADBC_MINOR@
export MARIADB_CFLAGS=$(gb_SPACE)@MARIADB_CFLAGS@
export MARIADB_LIBS=$(gb_SPACE)@MARIADB_LIBS@
export LIBMARIADB=@LIBMARIADB@
export LIBMARIADB_PATH=@LIBMARIADB_PATH@
export BUNDLE_MARIADB_CONNECTOR_C=@BUNDLE_MARIADB_CONNECTOR_C@
export MDDS_CFLAGS=$(gb_SPACE)@MDDS_CFLAGS@
export MDDS_LIBS=$(gb_SPACE)@MDDS_LIBS@
export MERGELIBS=@MERGELIBS@
export ML_EXE=@ML_EXE@
export MOC5=@MOC5@
export MOC6=@MOC6@
export MPL_SUBSET=@MPL_SUBSET@
export MSGFMT=@MSGFMT@
export MSGUNIQ=@MSGUNIQ@
export MSM_PATH=@MSM_PATH@
export MSPUB_CFLAGS=$(gb_SPACE)@MSPUB_CFLAGS@
export MSPUB_LIBS=$(gb_SPACE)@MSPUB_LIBS@
export MSVC_CXX=@MSVC_CXX@
export MSVC_DLLS=@MSVC_DLLS@
export MSVC_DLL_PATH=@MSVC_DLL_PATH@
export MSVC_USE_DEBUG_RUNTIME=@MSVC_USE_DEBUG_RUNTIME@
export MWAW_CFLAGS=$(gb_SPACE)@MWAW_CFLAGS@
export MWAW_LIBS=$(gb_SPACE)@MWAW_LIBS@
export MYTHES_CFLAGS=$(gb_SPACE)@MYTHES_CFLAGS@
export MYTHES_LIBS=$(gb_SPACE)@MYTHES_LIBS@
export NASM=@NASM@
export NAFLAGS=@NAFLAGS@
export NEON_CFLAGS=$(gb_SPACE)@NEON_CFLAGS@
export NEON_LIBS=$(gb_SPACE)@NEON_LIBS@
export NEON_VERSION=@NEON_VERSION@
export NM=@NM@
export NSS_CFLAGS=$(gb_SPACE)@NSS_CFLAGS@
export NSS_LIBS=$(gb_SPACE)@NSS_LIBS@
export NUMBERTEXT_EXTENSION_PACK=@NUMBERTEXT_EXTENSION_PACK@
export nodep=@nodep@
@x_OBJCFLAGS@ export OBJCFLAGS=@OBJCFLAGS@
@x_OBJCXXFLAGS@ export OBJCXXFLAGS=@OBJCXXFLAGS@
export OBJDUMP=@OBJDUMP@
export ODFGEN_CFLAGS=$(gb_SPACE)@ODFGEN_CFLAGS@
export ODFGEN_LIBS=$(gb_SPACE)@ODFGEN_LIBS@
export ODFVALIDATOR=@ODFVALIDATOR@
export OFFICEOTRON=@OFFICEOTRON@
export BFFVALIDATOR=@BFFVALIDATOR@
export OOO_JUNIT_JAR=@OOO_JUNIT_JAR@
export OOO_VENDOR=@OOO_VENDOR@
export OPENSSL_CFLAGS=$(gb_SPACE)@OPENSSL_CFLAGS@
export OPENSSL_LIBS=$(gb_SPACE)@OPENSSL_LIBS@
export ORCUS_CFLAGS=$(gb_SPACE)@ORCUS_CFLAGS@
export ORCUS_LIBS=$(gb_SPACE)@ORCUS_LIBS@
export OS=@OS@
export OS_FOR_BUILD=@OS_FOR_BUILD@
export PATH=@LO_PATH@
export LIBO_PATH_SEPARATOR=@P_SEP@
export PAGEMAKER_CFLAGS=$(gb_SPACE)@PAGEMAKER_CFLAGS@
export PAGEMAKER_LIBS=$(gb_SPACE)@PAGEMAKER_LIBS@
export PCH_INSTANTIATE_TEMPLATES=@PCH_INSTANTIATE_TEMPLATES@
export PCH_CODEGEN=@PCH_CODEGEN@
export PCH_DEBUGINFO=@PCH_DEBUGINFO@
export PCH_NO_CODEGEN=@PCH_NO_CODEGEN@
export PERL=@PERL@
export PKGFORMAT=@PKGFORMAT@
export PKGMK=@PKGMK@
export PKG_CONFIG=@PKG_CONFIG@
ifneq (@PKG_CONFIG_PATH@,)
export PKG_CONFIG_PATH=@PKG_CONFIG_PATH@
else
unexport PKG_CONFIG_PATH
endif
ifneq (@PKG_CONFIG_LIBDIR@,)
export PKG_CONFIG_LIBDIR=@PKG_CONFIG_LIBDIR@
else
unexport PKG_CONFIG_LIBDIR
endif
export PLATFORMID=@PLATFORMID@
export POPPLER_CFLAGS=$(gb_SPACE)@POPPLER_CFLAGS@
export POPPLER_LIBS=$(gb_SPACE)@POPPLER_LIBS@
export POSTGRESQL_INC=@POSTGRESQL_INC@
export POSTGRESQL_LIB=@POSTGRESQL_LIB@
export PREFIXDIR=@PREFIXDIR@
export PRIVACY_POLICY_URL=@PRIVACY_POLICY_URL@
export PRODUCTNAME=@PRODUCTNAME@
export PRODUCTNAME_WITHOUT_SPACES=@PRODUCTNAME_WITHOUT_SPACES@
export PRODUCTVERSION=@PRODUCTVERSION@
export PROGRESSBARCOLOR=@PROGRESSBARCOLOR@
export PROGRESSFRAMECOLOR=@PROGRESSFRAMECOLOR@
export PROGRESSPOSITION=@PROGRESSPOSITION@
export PROGRESSSIZE=@PROGRESSSIZE@
export PROGRESSTEXTBASELINE=@PROGRESSTEXTBASELINE@
export PROGRESSTEXTCOLOR=@PROGRESSTEXTCOLOR@
export PTHREAD_CFLAGS=@PTHREAD_CFLAGS@
export PTHREAD_LIBS=@PTHREAD_LIBS@
export PYTHON_CFLAGS=$(gb_SPACE)@PYTHON_CFLAGS@
export PYTHON_FOR_BUILD=@PYTHON_FOR_BUILD@
export PYTHON_LIBS=$(gb_SPACE)@PYTHON_LIBS@
export PYTHON_VERSION=@PYTHON_VERSION@
export PYTHON_VERSION_MAJOR=@PYTHON_VERSION_MAJOR@
export PYTHON_VERSION_MINOR=@PYTHON_VERSION_MINOR@
export PYTHONWARNINGS=@PYTHONWARNINGS@
export ENABLE_ZXING=@ENABLE_ZXING@
export ZXING_CFLAGS=$(gb_SPACE)@ZXING_CFLAGS@
export ZXING_LIBS=$(gb_SPACE)@ZXING_LIBS@
export QT5_CFLAGS=$(gb_SPACE)@QT5_CFLAGS@
export QT5_LIBS=$(gb_SPACE)@QT5_LIBS@
export QT5_GOBJECT_CFLAGS=$(gb_SPACE)@QT5_GOBJECT_CFLAGS@
export QT5_GOBJECT_LIBS=$(gb_SPACE)@QT5_GOBJECT_LIBS@
export QT5_HAVE_GOBJECT=@QT5_HAVE_GOBJECT@
export QT5_PLATFORMS_SRCDIR=@QT5_PLATFORMS_SRCDIR@
export QT6_CFLAGS=$(gb_SPACE)@QT6_CFLAGS@
export QT6_LIBS=$(gb_SPACE)@QT6_LIBS@
export QT6_PLATFORMS_SRCDIR=@QT6_PLATFORMS_SRCDIR@
export QXP_CFLAGS=$(gb_SPACE)@QXP_CFLAGS@
export QXP_LIBS=$(gb_SPACE)@QXP_LIBS@
export RANLIB=@RANLIB@
export RAPTOR_MAJOR=@RAPTOR_MAJOR@
export RASQAL_MAJOR=@RASQAL_MAJOR@
export READELF=@READELF@
export REDLAND_CFLAGS=$(gb_SPACE)@REDLAND_CFLAGS@
export REDLAND_LIBS=$(gb_SPACE)@REDLAND_LIBS@
export REDLAND_MAJOR=@REDLAND_MAJOR@
export REVENGE_CFLAGS=$(gb_SPACE)@REVENGE_CFLAGS@
export REVENGE_LIBS=$(gb_SPACE)@REVENGE_LIBS@
export RHINO_JAR=@RHINO_JAR@
export RPM=@RPM@
export RTL_ARCH=@RTL_ARCH@
export RTL_OS=@RTL_OS@
export SAC_JAR=@SAC_JAR@
export SAL_ENABLE_FILE_LOCKING=1
export SCPDEFS=@SCPDEFS@
export SDKDIRNAME=@SDKDIRNAME@
export SDKDIRNAME_FOR_BUILD=@SDKDIRNAME_FOR_BUILD@
export SERF_CFLAGS=$(gb_SPACE)@SERF_CFLAGS@
export SERF_LIBS=$(gb_SPACE)@SERF_LIBS@
export SHA256SUM=@SHA256SUM@
export SHOWINCLUDES_PREFIX=@SHOWINCLUDES_PREFIX@
export SIZEOF_SIZE_T=@SIZEOF_SIZE_T@
export SKIA_DISABLE_VMA_USE_STL_SHARED_MUTEX=@SKIA_DISABLE_VMA_USE_STL_SHARED_MUTEX@
export SKIA_GPU=@SKIA_GPU@
export SOLARINC=@SOLARINC@
export SORT=@SORT@
export SPLIT_APP_MODULES=@SPLIT_APP_MODULES@
export SPLIT_OPT_FEATURES=@SPLIT_OPT_FEATURES@
export SRCDIR=@SRC_ROOT@
export STAROFFICE_CFLAGS=$(gb_SPACE)@STAROFFICE_CFLAGS@
export STAROFFICE_LIBS=$(gb_SPACE)@STAROFFICE_LIBS@
export STRIP=@STRIP@
export STRIP_COMPONENTS=@STRIP_COMPONENTS@
export SYSBASE=@SYSBASE@
export SYSTEM_ABSEIL=@SYSTEM_ABSEIL@
export ABSEIL_CFLAGS=@ABSEIL_CFLAGS@
export ABSEIL_LIBS=@ABSEIL_LIBS@
export SYSTEM_ABW=@SYSTEM_ABW@
export SYSTEM_APR=@SYSTEM_APR@
export SYSTEM_BLUEZ=@SYSTEM_BLUEZ@
export SYSTEM_BOOST=@SYSTEM_BOOST@
export SYSTEM_BSH=@SYSTEM_BSH@
export SYSTEM_BOX2D=@SYSTEM_BOX2D@
export SYSTEM_BZIP2=@SYSTEM_BZIP2@
export SYSTEM_CAIRO=@SYSTEM_CAIRO@
export SYSTEM_CLUCENE=@SYSTEM_CLUCENE@
export SYSTEM_CPPUNIT=@SYSTEM_CPPUNIT@
export SYSTEM_CUCKOO=@SYSTEM_CUCKOO@
export SYSTEM_CURL=@SYSTEM_CURL@
export SYSTEM_DICTS=@SYSTEM_DICTS@
export SYSTEM_EXPAT=@SYSTEM_EXPAT@
export SYSTEM_FONTCONFIG=@SYSTEM_FONTCONFIG@
export SYSTEM_FREETYPE=@SYSTEM_FREETYPE@
export SYSTEM_FIREBIRD=@SYSTEM_FIREBIRD@
export SYSTEM_GENBRK=@SYSTEM_GENBRK@
export SYSTEM_GENCCODE=@SYSTEM_GENCCODE@
export SYSTEM_GENCMN=@SYSTEM_GENCMN@
export SYSTEM_EPOXY=@SYSTEM_EPOXY@
export SYSTEM_GLM=@SYSTEM_GLM@
export SYSTEM_GPGMEPP=@SYSTEM_GPGMEPP@
export SYSTEM_GRAPHITE=@SYSTEM_GRAPHITE@
export SYSTEM_HARFBUZZ=@SYSTEM_HARFBUZZ@
export SYSTEM_HSQLDB=@SYSTEM_HSQLDB@
export SYSTEM_HUNSPELL=@SYSTEM_HUNSPELL@
export SYSTEM_HYPH=@SYSTEM_HYPH@
export SYSTEM_ICU=@SYSTEM_ICU@
export SYSTEM_JFREEREPORT=@SYSTEM_JFREEREPORT@
export SYSTEM_LIBJPEG=@SYSTEM_LIBJPEG@
export SYSTEM_LCMS2=@SYSTEM_LCMS2@
export SYSTEM_CDR=@SYSTEM_CDR@
export SYSTEM_LIBCMIS=@SYSTEM_LIBCMIS@
export SYSTEM_EBOOK=@SYSTEM_EBOOK@
export SYSTEM_ETONYEK=@SYSTEM_ETONYEK@
export SYSTEM_EPUBGEN=@SYSTEM_EPUBGEN@
export SYSTEM_FREEHAND=@SYSTEM_FREEHAND@
export SYSTEM_LIBATOMIC_OPS=@SYSTEM_LIBATOMIC_OPS@
export SYSTEM_LIBEOT=@SYSTEM_LIBEOT@
export SYSTEM_LIBEXTTEXTCAT=@SYSTEM_LIBEXTTEXTCAT@
export SYSTEM_LIBEXTTEXTCAT_DATA=@SYSTEM_LIBEXTTEXTCAT_DATA@
export SYSTEM_LIBLANGTAG=@SYSTEM_LIBLANGTAG@
export SYSTEM_LIBNUMBERTEXT=@SYSTEM_LIBNUMBERTEXT@
export SYSTEM_LIBNUMBERTEXT_DATA=@SYSTEM_LIBNUMBERTEXT_DATA@
export SYSTEM_LIBORCUS=@SYSTEM_LIBORCUS@
export SYSTEM_LIBPNG=@SYSTEM_LIBPNG@
export SYSTEM_LIBTOMMATH=@SYSTEM_LIBTOMMATH@
export SYSTEM_LIBXML=@SYSTEM_LIBXML@
export SYSTEM_LIBXML_FOR_BUILD=@SYSTEM_LIBXML_FOR_BUILD@
export SYSTEM_LIBXSLT=@SYSTEM_LIBXSLT@
export SYSTEM_LIBXSLT_FOR_BUILD=@SYSTEM_LIBXSLT_FOR_BUILD@
export SYSTEM_LPSOLVE=@SYSTEM_LPSOLVE@
export SYSTEM_MDDS=@SYSTEM_MDDS@
export SYSTEM_MARIADB_CONNECTOR_C=@SYSTEM_MARIADB_CONNECTOR_C@
export SYSTEM_MSPUB=@SYSTEM_MSPUB@
export SYSTEM_MWAW=@SYSTEM_MWAW@
export SYSTEM_MYTHES=@SYSTEM_MYTHES@
export SYSTEM_NEON=@SYSTEM_NEON@
export SYSTEM_NSS=@SYSTEM_NSS@
export SYSTEM_ODBC_HEADERS=@SYSTEM_ODBC_HEADERS@
export SYSTEM_ODFGEN=@SYSTEM_ODFGEN@
export SYSTEM_OPENJPEG2=@SYSTEM_OPENJPEG2@
export OPENJPEG2_CFLAGS=@OPENJPEG2_CFLAGS@
export OPENJPEG2_LIBS=@OPENJPEG2_LIBS@
export SYSTEM_OPENLDAP=@SYSTEM_OPENLDAP@
export SYSTEM_OPENSSL=@SYSTEM_OPENSSL@
export SYSTEM_PAGEMAKER=@SYSTEM_PAGEMAKER@
export SYSTEM_POPPLER=@SYSTEM_POPPLER@
export SYSTEM_POSTGRESQL=@SYSTEM_POSTGRESQL@
export SYSTEM_PYTHON=@SYSTEM_PYTHON@
export SYSTEM_ZXING=@SYSTEM_ZXING@
export SYSTEM_QXP=@SYSTEM_QXP@
export SYSTEM_REDLAND=@SYSTEM_REDLAND@
export SYSTEM_REVENGE=@SYSTEM_REVENGE@
export SYSTEM_RHINO=@SYSTEM_RHINO@
export SYSTEM_SERF=@SYSTEM_SERF@
export SYSTEM_STAROFFICE=@SYSTEM_STAROFFICE@
export SYSTEM_UCPP=@SYSTEM_UCPP@
export SYSTEM_UCPP_IS_GCC=@SYSTEM_UCPP_IS_GCC@
export SYSTEM_VISIO=@SYSTEM_VISIO@
export SYSTEM_WPD=@SYSTEM_WPD@
export SYSTEM_WPG=@SYSTEM_WPG@
export SYSTEM_WPS=@SYSTEM_WPS@
export SYSTEM_XMLSEC=@SYSTEM_XMLSEC@
export SYSTEM_ZLIB=@SYSTEM_ZLIB@
export SYSTEM_ZMF=@SYSTEM_ZMF@
export TARFILE_LOCATION=@TARFILE_LOCATION@
export TESTINSTALLDIR=@TESTINSTALLDIR@
export THES_SYSTEM_DIR=@THES_SYSTEM_DIR@
export TLS=@TLS@
export TMPDIR=@TEMP_DIRECTORY@
export TOUCH=@TOUCH@
export UCRTSDKDIR=@UCRTSDKDIR@
export UCRTVERSION=@UCRTVERSION@
export UCRT_REDISTDIR=@UCRT_REDISTDIR@
export USE_HEADLESS_CODE=@USE_HEADLESS_CODE@
export USE_LD=@USE_LD@
export USE_LIBRARY_BIN_TAR=@USE_LIBRARY_BIN_TAR@
export USE_XINERAMA=@USE_XINERAMA@
export UPDATE_CONFIG=@UPDATE_CONFIG@
export UUIDGEN=@UUIDGEN@
export VALGRIND_CFLAGS=$(gb_SPACE)@VALGRIND_CFLAGS@
export VCL_PLUGIN_INFO=@VCL_PLUGIN_INFO@
export VCTOOLSET=@VCTOOLSET@
export VCVER=@VCVER@
export DEVENV=@DEVENV@
export VISIO_CFLAGS=$(gb_SPACE)@VISIO_CFLAGS@
export VISIO_LIBS=$(gb_SPACE)@VISIO_LIBS@
export WGET=@WGET@
export WINDOWS_BUILD_SIGNING=@WINDOWS_BUILD_SIGNING@
export WINDOWS_SDK_HOME=@WINDOWS_SDK_HOME@
export WINDOWS_SDK_LIB_SUBDIR=@WINDOWS_SDK_LIB_SUBDIR@
export WINDOWS_SDK_VERSION=@WINDOWS_SDK_VERSION@
export WINDOWS_SDK_WILANGID=@WINDOWS_SDK_WILANGID@
export WINDOWS_X64=@WINDOWS_X64@
export WITH_COMPAT_OOWRAPPERS=@WITH_COMPAT_OOWRAPPERS@
export WITH_EXTENSION_INTEGRATION=@WITH_EXTENSION_INTEGRATION@
export WITH_EXTRA_EXTENSIONS=@WITH_EXTRA_EXTENSIONS@
export WITH_FONTS=@WITH_FONTS@
export WITH_GALLERY_BUILD=@WITH_GALLERY_BUILD@
export WITH_GSSAPI=@WITH_GSSAPI@
export WITH_KRB5=@WITH_KRB5@
export WITH_LINKER_HASH_STYLE=@WITH_LINKER_HASH_STYLE@
export WITH_LOCALES=@WITH_LOCALES@
export WITH_MYSPELL_DICTS=@WITH_MYSPELL_DICTS@
export WITH_POOR_HELP_LOCALIZATIONS=@WITH_POOR_HELP_LOCALIZATIONS@
export WITH_THEMES=@WITH_THEMES@
export WITH_WEBDAV=@WITH_WEBDAV@
export WORKDIR=@WORKDIR@
export WORKDIR_FOR_BUILD=@WORKDIR_FOR_BUILD@
export WPD_CFLAGS=$(gb_SPACE)@WPD_CFLAGS@
export WPD_LIBS=$(gb_SPACE)@WPD_LIBS@
export WPG_CFLAGS=$(gb_SPACE)@WPG_CFLAGS@
export WPG_LIBS=$(gb_SPACE)@WPG_LIBS@
export WPS_CFLAGS=$(gb_SPACE)@WPS_CFLAGS@
export WPS_LIBS=$(gb_SPACE)@WPS_LIBS@
export XINERAMA_LINK=@XINERAMA_LINK@
export XMLLINT=@XMLLINT@
export XMLSEC_CFLAGS=$(gb_SPACE)@XMLSEC_CFLAGS@
export XMLSEC_LIBS=$(gb_SPACE)@XMLSEC_LIBS@
export XRANDR_CFLAGS=$(gb_SPACE)@XRANDR_CFLAGS@
export XRANDR_LIBS=$(gb_SPACE)@XRANDR_LIBS@
export XRENDER_CFLAGS=$(gb_SPACE)@XRENDER_CFLAGS@
export XRENDER_LIBS=$(gb_SPACE)@XRENDER_LIBS@
export XSLTPROC=@XSLTPROC@
export ZLIB_CFLAGS=$(gb_SPACE)@ZLIB_CFLAGS@
export ZLIB_LIBS=$(gb_SPACE)@ZLIB_LIBS@
export ZMF_CFLAGS=$(gb_SPACE)@ZMF_CFLAGS@
export ZMF_LIBS=$(gb_SPACE)@ZMF_LIBS@

# lang-related stuff
include $(BUILDDIR)/config_$(gb_Side)_lang.mk

# tarball names
# does use some of the variables defined above
include @SRC_ROOT@/download.lst
-------------- next part --------------
 # config variable for LibreOffice
 # this file is intended to be able to be included in a Makefile
 # and not to be sourced in a shell session
 #

# Horrible hack to prepend spaces to expansions
# Spaces are usually eaten by make parser but not if variable expands to space.
# Space prefix is desirable because system CFLAGS may be completely empty,
# which means that the variables defined here would need extra twiddling
# to get them into invoked external configures and override pkg-config there.
gb_SPACE:=$(gb_SPACE) $(gb_SPACE)
export SRC_ROOT=/home/christian/repos/libreoffice
export BUILDDIR=/home/christian/repos/libreoffice

# export AFLAGS=
export ABW_CFLAGS=$(gb_SPACE)
export ABW_LIBS=$(gb_SPACE)
export ANDROID_NDK_HOME=
export ANDROID_APP_ABI=
export ANDROID_SDK_HOME=
export ANDROID_PACKAGE_NAME=
export ANDROID_BINUTILS_PREBUILT_ROOT=
export ANDROID_GCC_TOOLCHAIN_VERSION=
export ANT=
export ANT_HOME=
export ANT_LIB=
export APR_CFLAGS=$(gb_SPACE)
export APR_LIBS=$(gb_SPACE)
export AR=ar
export ASSERT_ALWAYS_ABORT=TRUE
export ATL_INCLUDE=
export ATL_LIB=
export ATOMIC_LIB=
export AVAHI_CFLAGS=$(gb_SPACE)
export AVAHI_LIBS=$(gb_SPACE)
export LIBATOMIC_OPS_CFLAGS=$(gb_SPACE)
export LIBATOMIC_OPS_LIBS=$(gb_SPACE)
export BINDIR=/usr/local/bin
export BISON=/usr/bin/bison
export BOOST_CPPFLAGS=-I/home/christian/repos/libreoffice/external/boost/include -I/home/christian/repos/libreoffice/workdir/UnpackedTarball/boost
export BOOST_CXXFLAGS=-D_GLIBCXX_HAS_GTHREADS
export BOOST_LOCALE_LIB=
export BOOST_DATE_TIME_LIB=
export BOOST_FILESYSTEM_LIB=
export BOOST_IOSTREAMS_LIB=
export BOOST_LDFLAGS=
export BOOST_SYSTEM_LIB=
export BOX2D_CFLAGS=
export BOX2D_LIBS=
export BRAND_INTRO_IMAGES=intro.png intro-highres.png
export BREAKPAD_SYMBOL_CONFIG=
export BSH_JAR=
export BUILD_PLATFORM=x86_64-pc-linux-gnu
export BUILD_POSTGRESQL_SDBC=TRUE
export BUILD_TYPE=LibO DESKTOP AVMEDIA DBCONNECTIVITY EXTENSIONS SCRIPTING DYNLOADING NATIVE HELPTOOLS XMLHELP LIBCMIS UCPP LIBJPEG_TURBO CLUCENE EXPAT XMLSEC REVENGE ODFGEN EPUBGEN WPD WPG WPS VISIO CDR MSPUB MWAW ETONYEK FREEHAND EBOOK ABW PAGEMAKER QXP ZMF STAROFFICE LCMS2 CPPUNIT PYUNO LIBRELOGO MARIADBC MARIADB_CONNECTOR_C POSTGRESQL LIBTOMMATH FIREBIRD CURL BOOST MDDS CUCKOO GLM NSS OPENLDAP SANE ICU ORCUS GRAPHITE HARFBUZZ OPENSSL CRYPTO_NSS REDLAND HUNSPELL ZXING BOX2D HYPHEN MYTHES COINMP LPSOLVE LIBEXTTEXTCAT LIBNUMBERTEXT EPOXY OPENCL PDFIUM POPPLER SKIA LIBGPGERROR LIBASSUAN GPGMEPP OPENSYMBOL MORE_FONTS LIBLANGTAG LIBPNG
export BUILD_X64=
export BUILD_X86=
export BUILDING_PCH_WITH_OBJ=
export BZIP2_CFLAGS=$(gb_SPACE)
export BZIP2_LIBS=$(gb_SPACE)
export CAIRO_CFLAGS=$(gb_SPACE)-isystem /usr/include/cairo -isystem /usr/include/glib-2.0 -isystem /usr/lib64/glib-2.0/include -isystem /usr/include/sysprof-4 -isystem /usr/include/pixman-1 -isystem /usr/include/freetype2 -isystem /usr/include/libpng16 -isystem /usr/include/harfbuzz -isystem /usr/include/libxml2 -pthread 
export CAIRO_LIBS=$(gb_SPACE) -lcairo
export CC=gcc
export CC_FOR_BUILD=gcc
export CCACHE_DEPEND_MODE=1
export CDR_CFLAGS=$(gb_SPACE)
export CDR_LIBS=$(gb_SPACE)
# export CFLAGS=
export CLANG_USE_LD=
export CLANGDIR=
export CLANGLIBDIR=
export CLANGSYSINCLUDE=
export CLANGTOOLLIBS=
export CLUCENE_CFLAGS=$(gb_SPACE)
export CLUCENE_LIBS=$(gb_SPACE)
export LIBCMIS_CFLAGS=$(gb_SPACE)
export LIBCMIS_LIBS=$(gb_SPACE)
export COM=GCC
export COMPATH=/usr/lib64/ccache
export COMPILER_PLUGINS=
export COMPILER_PLUGINS_ANALYZER_PCH=TRUE
export COMPILER_PLUGINS_COM_IS_CLANG=
export COMPILER_PLUGINS_CXX=
export COMPILER_PLUGINS_CXXFLAGS=
export COMPILER_PLUGINS_CXX_LINKFLAGS=
export COMPILER_PLUGINS_DEBUG=
export COMPILER_PLUGINS_TOOLING_ARGS=
export COM_IS_CLANG=
export CPPU_ENV=gcc3
export CPPU_ENV_FOR_BUILD=gcc3
export CPPUNIT_CFLAGS=$(gb_SPACE)
export CPPUNIT_LIBS=$(gb_SPACE)
export CPUNAME=X86_64
export CROSS_COMPILING=
export CUCKOO_CFLAGS=$(gb_SPACE)-isystem /home/christian/repos/libreoffice/workdir/UnpackedTarball/cuckoo
export CURL=/usr/bin/curl
export CURL_CFLAGS=$(gb_SPACE)
export CURL_LIBS=$(gb_SPACE)
export CUSTOM_BRAND_DIR=
export CUSTOM_BRAND_IMAGES=
export CXX=g++
export CXX_FOR_BUILD=
export CXX_X64_BINARY=
export CXX_X86_BINARY=
# export CXXFLAGS=
export CXXFLAGS_CXX11=-std=c++17
export CXXFLAGS_INTRINSICS_SSE2=-msse2
export CXXFLAGS_INTRINSICS_SSSE3=-mssse3
export CXXFLAGS_INTRINSICS_SSE41=-msse4.1
export CXXFLAGS_INTRINSICS_SSE42=-msse4.2
export CXXFLAGS_INTRINSICS_AVX=-mavx
export CXXFLAGS_INTRINSICS_AVX2=-mavx2
export CXXFLAGS_INTRINSICS_AVX512=-mavx512f -mavx512vl -mavx512bw -mavx512dq -mavx512cd
export CXXFLAGS_INTRINSICS_AVX512F=-mavx512f
export CXXFLAGS_INTRINSICS_F16C=-mf16c
export CXXFLAGS_INTRINSICS_FMA=-mfma
export DATADIR=/usr/local/share
export DBUS_CFLAGS=$(gb_SPACE)-isystem /usr/include/dbus-1.0 -isystem /usr/lib64/dbus-1.0/include 
export DBUS_LIBS=$(gb_SPACE) -ldbus-1
export DBUS_GLIB_CFLAGS=$(gb_SPACE)-I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/sysprof-4 -pthread 
export DBUS_GLIB_LIBS=$(gb_SPACE)-lglib-2.0 
export DBUS_HAVE_GLIB=TRUE
export DCONF_CFLAGS=-I/usr/include/dconf -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/sysprof-4 -I/usr/include/libmount -I/usr/include/blkid -pthread 
export DCONF_LIBS=-ldconf -lgio-2.0 -lgobject-2.0 -lglib-2.0 
export DEFAULT_BRAND_IMAGES=intro.png intro-highres.png logo.svg logo_inverted.svg logo-sc.svg logo-sc_inverted.svg about.svg
export DICT_SYSTEM_DIR=file:///usr/share/myspell
export DISABLE_CVE_TESTS=
export DISABLE_DYNLOADING=
export DISABLE_PYTHON=
export DLOPEN_LIBS=
export DOCDIR=/usr/local/share/doc/libreoffice
export DOXYGEN=
export DO_FETCH_TARBALLS=TRUE
export DPKG=
export EBOOK_CFLAGS=$(gb_SPACE)
export EBOOK_LIBS=$(gb_SPACE)
export ENABLE_ANDROID_LOK=
export ENABLE_ANDROID_EDITING=
export ENABLE_AVAHI=
export ENABLE_BREAKPAD=
export DEFAULT_CRASHDUMP_VALUE=true
export ENABLE_CAIRO_CANVAS=TRUE
export ENABLE_CHART_TESTS=
export ENABLE_CIPHER_OPENSSL_BACKEND=
export ENABLE_LIBCMIS=TRUE
export ENABLE_COINMP=TRUE
export SYSTEM_COINMP=
export COINMP_CFLAGS=
export COINMP_LIBS=
export ENABLE_CUPS=TRUE
export ENABLE_CURL=TRUE
export ENABLE_DBGUTIL=TRUE
export ENABLE_DBUS=TRUE
export ENABLE_DCONF=TRUE
export ENABLE_DEBUG=TRUE
export ENABLE_EOT=
export ENABLE_EVOAB2=
export ENABLE_FIREBIRD_SDBC=TRUE
export ENABLE_FORMULA_LOGGER=TRUE
export ENABLE_GDB_INDEX=TRUE
export ENABLE_GIO=TRUE
export ENABLE_GPGMEPP=TRUE
export ENABLE_GSTREAMER_1_0=TRUE
export ENABLE_GTK3=TRUE
export ENABLE_GTK4=TRUE
export DISABLE_GUI=
export ENABLE_HEADLESS=TRUE
export ENABLE_HTMLHELP=
export ENABLE_JAVA=
export ENABLE_LDAP=TRUE
export ENABLE_LPSOLVE=TRUE
export ENABLE_LTO=
export ENABLE_LWP=TRUE
export ENABLE_MACOSX_SANDBOX=
export ENABLE_MEDIAWIKI=
export ENABLE_MARIADBC=TRUE
export ENABLE_NSS=TRUE
export ENABLE_ONLINE_UPDATE=
export ENABLE_ONLINE_UPDATE_MAR=
export ENABLE_EXTENSION_UPDATE=TRUE
export ENABLE_OOENV=TRUE
export ENABLE_OPENGL_TRANSITIONS=TRUE
export ENABLE_OPENGL_CANVAS=TRUE
export ENABLE_OPENSSL=TRUE
export ENABLE_OPTIMIZED=
export ENABLE_OPTIMIZED_DEBUG=
export ENABLE_PCH=
export ENABLE_PDFIMPORT=TRUE
export ENABLE_PDFIUM=TRUE
export ENABLE_POPPLER=TRUE
export ENABLE_QT5=
export ENABLE_QT6=
export ENABLE_KF5=
export ENABLE_GTK3_KDE5=
export ENABLE_RANDR=TRUE
export ENABLE_RELEASE_BUILD=
export ENABLE_REPORTBUILDER=
export ENABLE_RUNTIME_OPTIMIZATIONS=TRUE
export ENABLE_SAL_LOG=TRUE
export ENABLE_SCRIPTING_BEANSHELL=
export ENABLE_SCRIPTING_JAVASCRIPT=
export ENABLE_SDREMOTE=TRUE
export ENABLE_SDREMOTE_BLUETOOTH=TRUE
export ENABLE_SERVICES_RDB_FROM_BUILD=
export ENABLE_SILENT_MSI=
export ENABLE_SKIA=TRUE
export ENABLE_SKIA_DEBUG=
export ENABLE_SYMBOLS_FOR=all
export ENABLE_VALGRIND=TRUE
export ENABLE_WASM_STRIP=
export ENABLE_WERROR=
export ENABLE_Z7_DEBUG=TRUE
export ENDIANNESS=little
export EPM=NO
export EPM_FLAGS=
export EPUBGEN_CFLAGS=$(gb_SPACE)
export EPUBGEN_LIBS=$(gb_SPACE)
export ETONYEK_CFLAGS=$(gb_SPACE)
export ETONYEK_LIBS=$(gb_SPACE)
export debug=TRUE
export FIND=find
export FIREBIRD_CFLAGS=$(gb_SPACE)-I/home/christian/repos/libreoffice/workdir/UnpackedTarball/firebird/gen/Release/firebird/include
export FIREBIRD_LIBS=$(gb_SPACE)-lfbclient
export FLEX=/usr/bin/flex
export FLUTE_JAR=
export FONTCONFIG_CFLAGS=$(gb_SPACE)-I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/sysprof-4 -pthread -I/usr/include/libxml2 
export FONTCONFIG_LIBS=$(gb_SPACE) -lfontconfig -lfreetype
export FONTFORGE=
export FREEHAND_CFLAGS=$(gb_SPACE)
export FREEHAND_LIBS=$(gb_SPACE)
export FREETYPE_CFLAGS=$(gb_SPACE)-isystem /usr/include/freetype2 -isystem /usr/include/libpng16 -isystem /usr/include/harfbuzz -isystem /usr/include/glib-2.0 -isystem /usr/lib64/glib-2.0/include -isystem /usr/include/sysprof-4 -pthread 
export FREETYPE_LIBS=$(gb_SPACE) -lfreetype
export GCC_VERSION=1102
export GIO_CFLAGS=$(gb_SPACE)-isystem /usr/include/glib-2.0 -isystem /usr/lib64/glib-2.0/include -isystem /usr/include/sysprof-4 -isystem /usr/include/libmount -isystem /usr/include/blkid -pthread 
export GIO_LIBS=$(gb_SPACE) -lgio-2.0 -lgobject-2.0 -lglib-2.0
export GIT_REFERENCE_SRC=
export GIT_LINK_SRC=
export GIT_NEEDED_SUBMODULES=
export EPOXY_CFLAGS=$(gb_SPACE)-I/home/christian/repos/libreoffice/workdir/UnpackedTarball/epoxy/include
export EPOXY_LIBS=$(gb_SPACE)
export GLM_CFLAGS=$(gb_SPACE)-isystem /home/christian/repos/libreoffice/workdir/UnpackedTarball/glm
export GPG_ERROR_CFLAGS=$(gb_SPACE)-I/home/christian/repos/libreoffice/workdir/UnpackedTarball/libgpg-error/src
export GPG_ERROR_LIBS=$(gb_SPACE)-L/home/christian/repos/libreoffice/workdir/UnpackedTarball/libgpg-error/src/.libs -lgpg-error
export GPGMEPP_CFLAGS=$(gb_SPACE)
export GPGMEPP_LIBS=$(gb_SPACE)
export GNUTLS_CFLAGS=$(gb_SPACE)
export GNUTLS_LIBS=$(gb_SPACE)
export PARALLELISM?=12
 export GNUCOPY=/usr/bin/cp
export GNUPATCH=/usr/bin/patch
export GNUTAR=gtar
export GOBJECT_CFLAGS=$(gb_SPACE)
export GOBJECT_LIBS=$(gb_SPACE)
export GPERF=/usr/bin/gperf
export GRAPHITE_CFLAGS=$(gb_SPACE)-I/home/christian/repos/libreoffice/workdir/UnpackedTarball/graphite/include -DGRAPHITE2_STATIC
export GRAPHITE_LIBS=$(gb_SPACE)-L/home/christian/repos/libreoffice/workdir/LinkTarget/StaticLibrary -lgraphite
export HARFBUZZ_CFLAGS=$(gb_SPACE)-I/home/christian/repos/libreoffice/workdir/UnpackedTarball/harfbuzz/src
export HARFBUZZ_LIBS=$(gb_SPACE)-L/home/christian/repos/libreoffice/workdir/UnpackedTarball/harfbuzz/src/.libs -lharfbuzz
# export GREP=
export GSSAPI_LIBS=-lgssapi_krb5 
export GSTREAMER_1_0_CFLAGS=$(gb_SPACE)-isystem /usr/include/gstreamer-1.0 -isystem /usr/include/glib-2.0 -isystem /usr/lib64/glib-2.0/include -isystem /usr/include/sysprof-4 -isystem /usr/include/orc-0.4 -pthread 
export GSTREAMER_1_0_LIBS=$(gb_SPACE) -lgstpbutils-1.0 -lgstaudio-1.0 -lgstvideo-1.0 -lgstbase-1.0 -lgstreamer-1.0 -lgobject-2.0 -lglib-2.0
export GTK3_CFLAGS=$(gb_SPACE)-isystem /usr/include/gtk-3.0 -isystem /usr/include/pango-1.0 -isystem /usr/include/glib-2.0 -isystem /usr/lib64/glib-2.0/include -isystem /usr/include/sysprof-4 -isystem /usr/include/harfbuzz -isystem /usr/include/freetype2 -isystem /usr/include/libpng16 -isystem /usr/include/libmount -isystem /usr/include/blkid -isystem /usr/include/fribidi -isystem /usr/include/libxml2 -isystem /usr/include/cairo -isystem /usr/include/pixman-1 -isystem /usr/include/gdk-pixbuf-2.0 -isystem /usr/include/gio-unix-2.0 -isystem /usr/include/cloudproviders -isystem /usr/include/atk-1.0 -isystem /usr/include/at-spi2-atk/2.0 -isystem /usr/include/dbus-1.0 -isystem /usr/lib64/dbus-1.0/include -isystem /usr/include/at-spi-2.0 -isystem /usr/include/gtk-3.0/unix-print -pthread  -DGDK_DISABLE_DEPRECATED -DGTK_DISABLE_DEPRECATED
export GTK3_LIBS=$(gb_SPACE) -lgtk-3 -lgdk-3 -lpangocairo-1.0 -lpango-1.0 -lharfbuzz -latk-1.0 -lcairo-gobject -lgdk_pixbuf-2.0 -lgio-2.0 -lgobject-2.0 -lgmodule-2.0 -pthread -lglib-2.0 -lglib-2.0 -lcairo
export GTK4_CFLAGS=$(gb_SPACE)-isystem /usr/local/include/gtk-4.0 -isystem /usr/include/pango-1.0 -isystem /usr/include/glib-2.0 -isystem /usr/lib64/glib-2.0/include -isystem /usr/include/sysprof-4 -isystem /usr/include/harfbuzz -isystem /usr/include/freetype2 -isystem /usr/include/libpng16 -isystem /usr/include/libmount -isystem /usr/include/blkid -isystem /usr/include/fribidi -isystem /usr/include/libxml2 -isystem /usr/include/cairo -isystem /usr/include/pixman-1 -isystem /usr/include/gdk-pixbuf-2.0 -isystem /usr/include/graphene-1.0 -isystem /usr/lib64/graphene-1.0/include -mfpmath=sse -msse -msse2 -isystem /usr/include/gio-unix-2.0 -isystem /usr/include/atk-1.0 -pthread  -DGDK_DISABLE_DEPRECATED -DGTK_DISABLE_DEPRECATED
export GTK4_LIBS=$(gb_SPACE) -L/usr/local/lib64 -lgtk-4 -lpangocairo-1.0 -lpango-1.0 -lharfbuzz -lgdk_pixbuf-2.0 -lcairo-gobject -lvulkan -lgraphene-1.0 -lgio-2.0 -lgmodule-2.0 -pthread -lglib-2.0 -lcairo -latk-1.0 -lgobject-2.0 -lglib-2.0
export LIBADWAITA_CFLAGS=$(gb_SPACE)-isystem /usr/local/include/libadwaita-1 -isystem /usr/local/include/gtk-4.0 -isystem /usr/include/pango-1.0 -isystem /usr/include/glib-2.0 -isystem /usr/lib64/glib-2.0/include -isystem /usr/include/sysprof-4 -isystem /usr/include/harfbuzz -isystem /usr/include/freetype2 -isystem /usr/include/libpng16 -isystem /usr/include/libmount -isystem /usr/include/blkid -isystem /usr/include/fribidi -isystem /usr/include/libxml2 -isystem /usr/include/cairo -isystem /usr/include/pixman-1 -isystem /usr/include/gdk-pixbuf-2.0 -isystem /usr/include/graphene-1.0 -isystem /usr/lib64/graphene-1.0/include -mfpmath=sse -msse -msse2 -isystem /usr/include/gio-unix-2.0 -pthread 
export LIBADWAITA_LIBS=$(gb_SPACE) -L/usr/local/lib64 -ladwaita-1 -lgtk-4 -lpangocairo-1.0 -lpango-1.0 -lharfbuzz -lgdk_pixbuf-2.0 -lcairo-gobject -lcairo -lvulkan -lgraphene-1.0 -lgio-2.0 -lgobject-2.0 -lglib-2.0
export USING_X11=TRUE
export HAMCREST_JAR=
export HAVE_BROKEN_GCC_WMAYBE_UNINITIALIZED=
export HAVE_BROKEN_GCC_WSTRINGOP_OVERFLOW=
export HAVE_CLANG_DEBUG_INFO_KIND_CONSTRUCTOR=
export HAVE_CXX20_ATOMIC_REF=
export HAVE_DLLEXPORTINLINES=
export HAVE_LO_CLANG_DLLEXPORTINLINES=
export HAVE_GCC_AVX=TRUE
export HAVE_GCC_BUILTIN_ATOMIC=TRUE
export HAVE_GCC_FNO_ENFORCE_EH_SPECS=TRUE
export HAVE_GCC_FNO_SIZED_DEALLOCATION=TRUE
export HAVE_GCC_GGDB2=TRUE
export HAVE_GCC_SPLIT_DWARF=TRUE
export HAVE_GCC_STACK_CLASH_PROTECTION=TRUE
export HAVE_GNUMAKE_FILE_FUNC=TRUE
export HAVE_LD_BSYMBOLIC_FUNCTIONS=TRUE
export HAVE_LD_HASH_STYLE=TRUE
export HAVE_LIBSTDCPP=TRUE
export HAVE_POSIX_FALLOCATE=YES
export HAVE_WDEPRECATED_COPY_DTOR=TRUE
export HELP_ONLINE=
export HELP_OMINDEX_PAGE=
export HOST_PLATFORM=x86_64-pc-linux-gnu
export HSQLDB_JAR=
export HSQLDB_USE_JDBC_4_1=
export HUNSPELL_CFLAGS=$(gb_SPACE)-I/home/christian/repos/libreoffice/workdir/UnpackedTarball/hunspell/src/hunspell
export HUNSPELL_LIBS=$(gb_SPACE)-L/home/christian/repos/libreoffice/workdir/UnpackedTarball/hunspell/src/hunspell/.libs -lhunspell-1.7
export HYPHEN_LIB=$(gb_SPACE)-L/home/christian/repos/libreoffice/workdir/UnpackedTarball/hyphen/.libs -lhyphen
export HYPH_SYSTEM_DIR=file:///usr/share/hyphen
export ICECREAM_RUN=
# export ICECC_VERSION=
export ICU_CFLAGS=$(gb_SPACE)-I/home/christian/repos/libreoffice/workdir/UnpackedTarball/icu/source/i18n -I/home/christian/repos/libreoffice/workdir/UnpackedTarball/icu/source/common
export ICU_LIBS=$(gb_SPACE)-L/home/christian/repos/libreoffice/workdir/UnpackedTarball/icu/source/lib
export ICU_MAJOR=70
export ICU_MINOR=1
export ICU_RECLASSIFIED_CONDITIONAL_JAPANESE_STARTER=TRUE
export ICU_RECLASSIFIED_HEBREW_LETTER=TRUE
export ICU_RECLASSIFIED_PREPEND_SET_EMPTY=TRUE
export ICU_UCHAR_TYPE=-DUCHAR_TYPE=uint16_t
export INTROSPECTION_SCANNER=
export ILIB=
export ILIB_FOR_BUILD=
export INSTALLDIR=/usr/local/lib/libreoffice
export INSTALLDIRNAME=libreoffice
export INSTALL_NAME_TOOL=
export INSTDIR=/home/christian/repos/libreoffice/instdir
export INSTDIR_FOR_BUILD=/home/christian/repos/libreoffice/instdir
export INSTROOT=/home/christian/repos/libreoffice/instdir
export INSTROOTBASE=/home/christian/repos/libreoffice/instdir
export INSTROOT_FOR_BUILD=/home/christian/repos/libreoffice/instdir
export IWYU_PATH=
export JAVACOMPILER=
export JAVADOC=
export JAVADOCISGJDOC=
export JAVACFLAGS=
export JAVAIFLAGS=
export JAVAIFLAGS_FOR_BUILD=
export JAVA_CLASSPATH_NOT_SET=
export JAVAINTERPRETER=
export JAVA_HOME=
export JAVA_HOME_FOR_BUILD=
export JAVA_SOURCE_VER=
export JAVA_TARGET_VER=
export JAWTLIB=
export JDK=
export JDK_FOR_BUILD=
export JFREEREPORT_JAR=
export JITC_PROCESSOR_TYPE=
export JVM_ONE_PATH_CHECK=
export KF5_CFLAGS=$(gb_SPACE)
export KF5_LIBS=$(gb_SPACE)
export KRB5_LIBS=-lcom_err  -lkrb5 
export LCMS2_CFLAGS=$(gb_SPACE)-I/home/christian/repos/libreoffice/workdir/UnpackedTarball/lcms2/include -Wno-long-long
export LCMS2_LIBS=$(gb_SPACE)-L/home/christian/repos/libreoffice/workdir/UnpackedTarball/lcms2/src/.libs -llcms2
export LD=
export LD_GC_SECTIONS=-Wl,--gc-sections
export LD_PLUGIN=
# export LDFLAGS= -fuse-ld=gold  
export LFS_CFLAGS=
export LIBASSUAN_CFLAGS=$(gb_SPACE)-I/home/christian/repos/libreoffice/workdir/UnpackedTarball/libassuan/src
export LIBASSUAN_LIBS=$(gb_SPACE)-L/home/christian/repos/libreoffice/workdir/UnpackedTarball/libassuan/src/.libs -lassuan
export LIBBASE_JAR=
export LIBDIR=/usr/local/lib
export LIBEOT_CFLAGS=$(gb_SPACE)
export LIBEOT_LIBS=$(gb_SPACE)
export LIBEXSLT_CFLAGS=$(gb_SPACE)-isystem /usr/include/libxml2 
export LIBEXSLT_LIBS=$(gb_SPACE) -lexslt -lxslt -lxml2
export LIBEXTTEXTCAT_CFLAGS=$(gb_SPACE)
export LIBEXTTEXTCAT_LIBS=$(gb_SPACE)
export LIBFONTS_JAR=
export LIBFORMULA_JAR=
export LIBGCRYPT_CFLAGS=
export LIBGCRYPT_LIBS=
export LIBJPEG_CFLAGS=$(gb_SPACE)
export LIBJPEG_LIBS=$(gb_SPACE)
export LIBLANGTAG_CFLAGS=$(gb_SPACE)-I/home/christian/repos/libreoffice/workdir/UnpackedTarball/liblangtag
export LIBLANGTAG_LIBS=$(gb_SPACE)-L/home/christian/repos/libreoffice/workdir/UnpackedTarball/liblangtag/liblangtag/.libs -llangtag
export LIBLAYOUT_JAR=
export LIBLOADER_JAR=
export LIBNUMBERTEXT_CFLAGS=$(gb_SPACE)
export LIBNUMBERTEXT_LIBS=$(gb_SPACE)
export LIB_FUZZING_ENGINE=
export LIBO_BIN_FOLDER=program
export LIBO_BIN_FOLDER_FOR_BUILD=program
export LIBO_ETC_FOLDER=program
export LIBO_LIB_FOLDER=program
export LIBO_LIB_FOLDER_FOR_BUILD=program
export LIBO_LIB_PYUNO_FOLDER=program
export LIBO_SHARE_FOLDER=share
export LIBO_SHARE_HELP_FOLDER=help
export LIBO_SHARE_JAVA_FOLDER=program/classes
export LIBO_SHARE_PRESETS_FOLDER=presets
export LIBO_SHARE_READMES_FOLDER=readmes
export LIBO_SHARE_RESOURCE_FOLDER=program/resource
export LIBO_URE_BIN_FOLDER=program
export LIBO_URE_ETC_FOLDER=program
export LIBO_URE_LIB_FOLDER=program
export LIBO_URE_LIB_FOLDER_FOR_BUILD=program
export LIBO_URE_MISC_FOLDER=program
export LIBO_URE_MISC_FOLDER_FOR_BUILD=program
export LIBO_URE_SHARE_JAVA_FOLDER=program/classes
export LIBO_VERSION_MAJOR=7
export LIBO_VERSION_MICRO=0
export LIBO_VERSION_MINOR=4
export LIBO_VERSION_PATCH=0
export LIBO_VERSION_SUFFIX=.alpha0
export LIBO_VERSION_SUFFIX_SUFFIX=+
export LIBPNG_CFLAGS=$(gb_SPACE)-I/home/christian/repos/libreoffice/workdir/UnpackedTarball/libpng
export LIBPNG_LIBS=$(gb_SPACE)-L/home/christian/repos/libreoffice/workdir/LinkTarget/StaticLibrary -llibpng
export LIBREPOSITORY_JAR=
export LIBSERIALIZER_JAR=
export LIBTOMMATH_CFLAGS=-I/home/christian/repos/libreoffice/workdir/UnpackedTarball/libtommath
export LIBTOMMATH_LIBS=-ltommath
export LIBTOOL=
export LIBXML_CFLAGS=$(gb_SPACE)-isystem /usr/include/libxml2 
export LIBXML_JAR=
export LIBXML_LIBS=$(gb_SPACE) -lxml2
export LIBXSLT_CFLAGS=$(gb_SPACE)-isystem /usr/include/libxml2 
export LIBXSLT_LIBS=$(gb_SPACE) -lxslt -lxml2
export LOCKFILE=
export LO_CLANG_CC=clang
export LO_CLANG_CXX=clang++
export LO_CLANG_CXXFLAGS_INTRINSICS_SSE2=-msse2
export LO_CLANG_CXXFLAGS_INTRINSICS_SSSE3=-mssse3
export LO_CLANG_CXXFLAGS_INTRINSICS_SSE41=-msse4.1
export LO_CLANG_CXXFLAGS_INTRINSICS_SSE42=-msse4.2
export LO_CLANG_CXXFLAGS_INTRINSICS_AVX=-mavx
export LO_CLANG_CXXFLAGS_INTRINSICS_AVX2=-mavx2
export LO_CLANG_CXXFLAGS_INTRINSICS_AVX512=-mavx512f -mavx512vl -mavx512bw -mavx512dq -mavx512cd
export LO_CLANG_CXXFLAGS_INTRINSICS_AVX512F=-mavx512f
export LO_CLANG_CXXFLAGS_INTRINSICS_F16C=-mf16c
export LO_CLANG_CXXFLAGS_INTRINSICS_FMA=-mfma
# export LO_ELFCHECK_ALLOWLIST=
# export LS=
export MACOSX_BUNDLE_IDENTIFIER=
export MACOSX_CODESIGNING_IDENTITY=
export MACOSX_DEPLOYMENT_TARGET=
export MACOSX_PACKAGE_SIGNING_IDENTITY=
export MACOSX_SDK_PATH=
export MAC_OS_X_VERSION_MAX_ALLOWED=
export MAC_OS_X_VERSION_MIN_REQUIRED=
export MANDIR=/usr/local/share/man
export MARIADBC_MAJOR=1
export MARIADBC_MICRO=2
export MARIADBC_MINOR=0
export MARIADB_CFLAGS=$(gb_SPACE)-I/home/christian/repos/libreoffice/workdir/UnpackedTarball/mariadb-connector-c/include
export MARIADB_LIBS=$(gb_SPACE)-L/home/christian/repos/libreoffice/workdir/LinkTarget/StaticLibrary -lmariadb-connector-c
export LIBMARIADB=
export LIBMARIADB_PATH=
export BUNDLE_MARIADB_CONNECTOR_C=
export MDDS_CFLAGS=$(gb_SPACE)-I/home/christian/repos/libreoffice/workdir/UnpackedTarball/mdds/include
export MDDS_LIBS=$(gb_SPACE)
export MERGELIBS=
export ML_EXE=
export MOC5=moc
export MOC6=moc
export MPL_SUBSET=
export MSGFMT=
export MSGUNIQ=
export MSM_PATH=
export MSPUB_CFLAGS=$(gb_SPACE)
export MSPUB_LIBS=$(gb_SPACE)
export MSVC_CXX=
export MSVC_DLLS=
export MSVC_DLL_PATH=
export MSVC_USE_DEBUG_RUNTIME=TRUE
export MWAW_CFLAGS=$(gb_SPACE)
export MWAW_LIBS=$(gb_SPACE)
export MYTHES_CFLAGS=$(gb_SPACE)
export MYTHES_LIBS=$(gb_SPACE)-L/home/christian/repos/libreoffice/workdir/UnpackedTarball/mythes/.libs -lmythes-1.2
export NASM=nasm
export NAFLAGS=-felf64 -DELF -D__x86_64__ -DPIC
export NEON_CFLAGS=$(gb_SPACE)
export NEON_LIBS=$(gb_SPACE)
export NEON_VERSION=
export NM=nm
export NSS_CFLAGS=$(gb_SPACE)
export NSS_LIBS=$(gb_SPACE)
export NUMBERTEXT_EXTENSION_PACK=
export nodep=
# export OBJCFLAGS=
# export OBJCXXFLAGS=
export OBJDUMP=objdump
export ODFGEN_CFLAGS=$(gb_SPACE)
export ODFGEN_LIBS=$(gb_SPACE)
export ODFVALIDATOR=
export OFFICEOTRON=
export BFFVALIDATOR=
export OOO_JUNIT_JAR=
export OOO_VENDOR=christian
export OPENSSL_CFLAGS=$(gb_SPACE)
export OPENSSL_LIBS=$(gb_SPACE)
export ORCUS_CFLAGS=$(gb_SPACE)
export ORCUS_LIBS=$(gb_SPACE)
export OS=LINUX
export OS_FOR_BUILD=LINUX
export PATH=/home/christian/perl5/bin:/home/christian/.local/bin:/home/christian/bin:/usr/lib64/ccache:/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin
export LIBO_PATH_SEPARATOR=:
export PAGEMAKER_CFLAGS=$(gb_SPACE)
export PAGEMAKER_LIBS=$(gb_SPACE)
export PCH_INSTANTIATE_TEMPLATES=
export PCH_CODEGEN=
export PCH_DEBUGINFO=
export PCH_NO_CODEGEN=
export PERL=/usr/bin/perl
export PKGFORMAT=
export PKGMK=
export PKG_CONFIG=/usr/bin/pkg-config
ifneq (,)
export PKG_CONFIG_PATH=
else
unexport PKG_CONFIG_PATH
endif
ifneq (,)
export PKG_CONFIG_LIBDIR=
else
unexport PKG_CONFIG_LIBDIR
endif
export PLATFORMID=linux_x86_64
export POPPLER_CFLAGS=$(gb_SPACE)
export POPPLER_LIBS=$(gb_SPACE)
export POSTGRESQL_INC=%OVERRIDE_ME%
export POSTGRESQL_LIB=
export PREFIXDIR=/usr/local
export PRIVACY_POLICY_URL=undefined
export PRODUCTNAME=LibreOfficeDev
export PRODUCTNAME_WITHOUT_SPACES=LibreOfficeDev
export PRODUCTVERSION=7.4
export PROGRESSBARCOLOR=
export PROGRESSFRAMECOLOR=
export PROGRESSPOSITION=
export PROGRESSSIZE=
export PROGRESSTEXTBASELINE=
export PROGRESSTEXTCOLOR=
export PTHREAD_CFLAGS=
export PTHREAD_LIBS=
export PYTHON_CFLAGS=$(gb_SPACE)-I/usr/include/python3.10 
export PYTHON_FOR_BUILD=/usr/bin/python
export PYTHON_LIBS=$(gb_SPACE) -lpython3.10 -lcrypt -ldl -lm
export PYTHON_VERSION=3.10
export PYTHON_VERSION_MAJOR=
export PYTHON_VERSION_MINOR=
export PYTHONWARNINGS=
export ENABLE_ZXING=TRUE
export ZXING_CFLAGS=$(gb_SPACE)
export ZXING_LIBS=$(gb_SPACE)
export QT5_CFLAGS=$(gb_SPACE)
export QT5_LIBS=$(gb_SPACE)
export QT5_GOBJECT_CFLAGS=$(gb_SPACE)
export QT5_GOBJECT_LIBS=$(gb_SPACE)
export QT5_HAVE_GOBJECT=
export QT5_PLATFORMS_SRCDIR=
export QT6_CFLAGS=$(gb_SPACE)
export QT6_LIBS=$(gb_SPACE)
export QT6_PLATFORMS_SRCDIR=
export QXP_CFLAGS=$(gb_SPACE)
export QXP_LIBS=$(gb_SPACE)
export RANLIB=ranlib
export RAPTOR_MAJOR=0
export RASQAL_MAJOR=3
export READELF=readelf
export REDLAND_CFLAGS=$(gb_SPACE)
export REDLAND_LIBS=$(gb_SPACE)
export REDLAND_MAJOR=0
export REVENGE_CFLAGS=$(gb_SPACE)-I/home/christian/repos/libreoffice/workdir/UnpackedTarball/librevenge/inc
export REVENGE_LIBS=$(gb_SPACE)-L/home/christian/repos/libreoffice/workdir/UnpackedTarball/librevenge/src/lib/.libs -lrevenge-0.0
export RHINO_JAR=
export RPM=
export RTL_ARCH=X86_64
export RTL_OS=Linux
export SAC_JAR=
export SAL_ENABLE_FILE_LOCKING=1
export SCPDEFS= -DWITH_POSTGRESQL_SDBC -DWITH_FIREBIRD_SDBC -DWITHOUT_EXTENSION_MEDIAWIKI -DWITHOUT_SCRIPTING_BEANSHELL -DWITHOUT_SCRIPTING_JAVASCRIPT -DWITH_EXTENSION_INTEGRATION -DENABLE_EXTENSION_UPDATE
export SDKDIRNAME=sdk
export SDKDIRNAME_FOR_BUILD=sdk
export SERF_CFLAGS=$(gb_SPACE)
export SERF_LIBS=$(gb_SPACE)
export SHA256SUM=shasum -a 256
export SHOWINCLUDES_PREFIX=
export SIZEOF_SIZE_T=8
export SKIA_DISABLE_VMA_USE_STL_SHARED_MUTEX=
export SKIA_GPU=VULKAN
export SOLARINC=-I/home/christian/repos/libreoffice/include  
export SORT=sort
export SPLIT_APP_MODULES=
export SPLIT_OPT_FEATURES=
export SRCDIR=/home/christian/repos/libreoffice
export STAROFFICE_CFLAGS=$(gb_SPACE)
export STAROFFICE_LIBS=$(gb_SPACE)
export STRIP=strip
export STRIP_COMPONENTS=--strip-components
export SYSBASE=
export SYSTEM_ABSEIL=
export ABSEIL_CFLAGS=
export ABSEIL_LIBS=
export SYSTEM_ABW=
export SYSTEM_APR=
export SYSTEM_BLUEZ=
export SYSTEM_BOOST=
export SYSTEM_BSH=
export SYSTEM_BOX2D=
export SYSTEM_BZIP2=
export SYSTEM_CAIRO=TRUE
export SYSTEM_CLUCENE=
export SYSTEM_CPPUNIT=
export SYSTEM_CUCKOO=
export SYSTEM_CURL=
export SYSTEM_DICTS=TRUE
export SYSTEM_EXPAT=
export SYSTEM_FONTCONFIG=TRUE
export SYSTEM_FREETYPE=TRUE
export SYSTEM_FIREBIRD=
export SYSTEM_GENBRK=
export SYSTEM_GENCCODE=
export SYSTEM_GENCMN=
export SYSTEM_EPOXY=
export SYSTEM_GLM=
export SYSTEM_GPGMEPP=
export SYSTEM_GRAPHITE=
export SYSTEM_HARFBUZZ=
export SYSTEM_HSQLDB=
export SYSTEM_HUNSPELL=
export SYSTEM_HYPH=
export SYSTEM_ICU=
export SYSTEM_JFREEREPORT=
export SYSTEM_LIBJPEG=
export SYSTEM_LCMS2=
export SYSTEM_CDR=
export SYSTEM_LIBCMIS=
export SYSTEM_EBOOK=
export SYSTEM_ETONYEK=
export SYSTEM_EPUBGEN=
export SYSTEM_FREEHAND=
export SYSTEM_LIBATOMIC_OPS=
export SYSTEM_LIBEOT=
export SYSTEM_LIBEXTTEXTCAT=
export SYSTEM_LIBEXTTEXTCAT_DATA=
export SYSTEM_LIBLANGTAG=
export SYSTEM_LIBNUMBERTEXT=
export SYSTEM_LIBNUMBERTEXT_DATA=
export SYSTEM_LIBORCUS=
export SYSTEM_LIBPNG=
export SYSTEM_LIBTOMMATH=
export SYSTEM_LIBXML=TRUE
export SYSTEM_LIBXML_FOR_BUILD=TRUE
export SYSTEM_LIBXSLT=TRUE
export SYSTEM_LIBXSLT_FOR_BUILD=TRUE
export SYSTEM_LPSOLVE=
export SYSTEM_MDDS=
export SYSTEM_MARIADB_CONNECTOR_C=
export SYSTEM_MSPUB=
export SYSTEM_MWAW=
export SYSTEM_MYTHES=
export SYSTEM_NEON=
export SYSTEM_NSS=
export SYSTEM_ODBC_HEADERS=
export SYSTEM_ODFGEN=
export SYSTEM_OPENJPEG2=FALSE
export OPENJPEG2_CFLAGS=
export OPENJPEG2_LIBS=
export SYSTEM_OPENLDAP=
export SYSTEM_OPENSSL=
export SYSTEM_PAGEMAKER=
export SYSTEM_POPPLER=
export SYSTEM_POSTGRESQL=
export SYSTEM_PYTHON=TRUE
export SYSTEM_ZXING=
export SYSTEM_QXP=
export SYSTEM_REDLAND=
export SYSTEM_REVENGE=
export SYSTEM_RHINO=
export SYSTEM_SERF=
export SYSTEM_STAROFFICE=
export SYSTEM_UCPP=
export SYSTEM_UCPP_IS_GCC=
export SYSTEM_VISIO=
export SYSTEM_WPD=
export SYSTEM_WPG=
export SYSTEM_WPS=
export SYSTEM_XMLSEC=
export SYSTEM_ZLIB=TRUE
export SYSTEM_ZMF=
export TARFILE_LOCATION=/home/christian/repos/libreoffice/external/tarballs
export TESTINSTALLDIR=/home/christian/repos/libreoffice/test-install
export THES_SYSTEM_DIR=file:///usr/share/mythes
export TLS=NSS
export TMPDIR=/tmp
export TOUCH=/usr/bin/touch
export UCRTSDKDIR=
export UCRTVERSION=
export UCRT_REDISTDIR=
export USE_HEADLESS_CODE=TRUE
export USE_LD=-fuse-ld=gold
export USE_LIBRARY_BIN_TAR=
export USE_XINERAMA=TRUE
export UPDATE_CONFIG=
export UUIDGEN=/usr/bin/uuidgen
export VALGRIND_CFLAGS=$(gb_SPACE)
export VCL_PLUGIN_INFO= gtk3 gtk4
export VCTOOLSET=
export VCVER=
export DEVENV=
export VISIO_CFLAGS=$(gb_SPACE)
export VISIO_LIBS=$(gb_SPACE)
export WGET=wget
export WINDOWS_BUILD_SIGNING=FALSE
export WINDOWS_SDK_HOME=
export WINDOWS_SDK_LIB_SUBDIR=
export WINDOWS_SDK_VERSION=
export WINDOWS_SDK_WILANGID=
export WINDOWS_X64=
export WITH_COMPAT_OOWRAPPERS=
export WITH_EXTENSION_INTEGRATION=TRUE
export WITH_EXTRA_EXTENSIONS=
export WITH_FONTS=TRUE
export WITH_GALLERY_BUILD=TRUE
export WITH_GSSAPI=TRUE
export WITH_KRB5=TRUE
export WITH_LINKER_HASH_STYLE=gnu
export WITH_LOCALES=
export WITH_MYSPELL_DICTS=
export WITH_POOR_HELP_LOCALIZATIONS=
export WITH_THEMES= breeze breeze_dark breeze_dark_svg breeze_svg colibre colibre_svg elementary elementary_svg karasa_jaga karasa_jaga_svg sifr sifr_dark sifr_dark_svg sifr_svg sukapura sukapura_svg 
export WITH_WEBDAV=curl
export WORKDIR=/home/christian/repos/libreoffice/workdir
export WORKDIR_FOR_BUILD=/home/christian/repos/libreoffice/workdir
export WPD_CFLAGS=$(gb_SPACE)-I/home/christian/repos/libreoffice/workdir/UnpackedTarball/libwpd/inc
export WPD_LIBS=$(gb_SPACE)-L/home/christian/repos/libreoffice/workdir/UnpackedTarball/libwpd/src/lib/.libs -lwpd-0.10
export WPG_CFLAGS=$(gb_SPACE)
export WPG_LIBS=$(gb_SPACE)
export WPS_CFLAGS=$(gb_SPACE)
export WPS_LIBS=$(gb_SPACE)
export XINERAMA_LINK=dynamic
export XMLLINT=/usr/bin/xmllint
export XMLSEC_CFLAGS=$(gb_SPACE)
export XMLSEC_LIBS=$(gb_SPACE)
export XRANDR_CFLAGS=$(gb_SPACE)
export XRANDR_LIBS=$(gb_SPACE) -lXrandr
export XRENDER_CFLAGS=$(gb_SPACE)
export XRENDER_LIBS=$(gb_SPACE) -lXrender -lX11
export XSLTPROC=/usr/bin/xsltproc
export ZLIB_CFLAGS=$(gb_SPACE)
export ZLIB_LIBS=$(gb_SPACE)-lz
export ZMF_CFLAGS=$(gb_SPACE)
export ZMF_LIBS=$(gb_SPACE)

# lang-related stuff
include $(BUILDDIR)/config_$(gb_Side)_lang.mk

# tarball names
# does use some of the variables defined above
include /home/christian/repos/libreoffice/download.lst


More information about the LibreOffice mailing list