[Libva] [PATCHv2] Parse aspect ratio when using GStreamer codec parsers
Simon Farnsworth
simon.farnsworth at onelan.co.uk
Wed Sep 12 10:30:31 PDT 2012
Not all encoded material uses square pixels. MPEG-4 part 2 already parsed
the aspect ratio from the bitstream; add equivalent code for H.264, MPEG-2
and VC-1.
Signed-off-by: Simon Farnsworth <simon.farnsworth at onelan.co.uk>
---
This is a respin based on using the calculated versions in the decoder
directly. I've not been able to get beyond compile testing due to other
issues with my test system, but as I'm not going to have time to attack this
again until after XDC (24th September at the earliest).
I'm sending this out anyway, so that other people can test it.
gst-libs/gst/vaapi/gstvaapidecoder_h264.c | 5 +++++
gst-libs/gst/vaapi/gstvaapidecoder_mpeg2.c | 1 +
gst-libs/gst/vaapi/gstvaapidecoder_vc1.c | 14 ++++++++++++++
3 files changed, 20 insertions(+)
diff --git a/gst-libs/gst/vaapi/gstvaapidecoder_h264.c b/gst-libs/gst/vaapi/gstvaapidecoder_h264.c
index 89fef91..edfd641 100644
--- a/gst-libs/gst/vaapi/gstvaapidecoder_h264.c
+++ b/gst-libs/gst/vaapi/gstvaapidecoder_h264.c
@@ -685,6 +685,7 @@ end:
static GstVaapiDecoderStatus
decode_sps(GstVaapiDecoderH264 *decoder, GstH264NalUnit *nalu)
{
+ GstVaapiDecoder * const base_decoder = GST_VAAPI_DECODER(decoder);
GstVaapiDecoderH264Private * const priv = decoder->priv;
GstH264SPS * const sps = &priv->last_sps;
GstH264ParserResult result;
@@ -699,6 +700,10 @@ decode_sps(GstVaapiDecoderH264 *decoder, GstH264NalUnit *nalu)
if (result != GST_H264_PARSER_OK)
return get_status(result);
+ gst_vaapi_decoder_set_pixel_aspect_ratio(base_decoder,
+ sps->vui_parameters.par_n,
+ sps->vui_parameters.par_d);
+
return ensure_context(decoder, sps);
}
diff --git a/gst-libs/gst/vaapi/gstvaapidecoder_mpeg2.c b/gst-libs/gst/vaapi/gstvaapidecoder_mpeg2.c
index 38ecb33..48e9c2b 100644
--- a/gst-libs/gst/vaapi/gstvaapidecoder_mpeg2.c
+++ b/gst-libs/gst/vaapi/gstvaapidecoder_mpeg2.c
@@ -513,6 +513,7 @@ decode_sequence(GstVaapiDecoderMpeg2 *decoder, guchar *buf, guint buf_size)
priv->fps_d = seq_hdr->fps_d;
pts_set_framerate(&priv->tsg, priv->fps_n, priv->fps_d);
gst_vaapi_decoder_set_framerate(base_decoder, priv->fps_n, priv->fps_d);
+ gst_vaapi_decoder_set_pixel_aspect_ratio(base_decoder, seq_hdr->par_w, seq_hdr->par_h);
priv->width = seq_hdr->width;
priv->height = seq_hdr->height;
diff --git a/gst-libs/gst/vaapi/gstvaapidecoder_vc1.c b/gst-libs/gst/vaapi/gstvaapidecoder_vc1.c
index 63fbc73..539902c 100644
--- a/gst-libs/gst/vaapi/gstvaapidecoder_vc1.c
+++ b/gst-libs/gst/vaapi/gstvaapidecoder_vc1.c
@@ -330,6 +330,20 @@ decode_sequence(GstVaapiDecoderVC1 *decoder, GstVC1BDU *rbdu, GstVC1BDU *ebdu)
switch (seq_hdr->profile) {
case GST_VC1_PROFILE_SIMPLE:
case GST_VC1_PROFILE_MAIN:
+ break;
+ case GST_VC1_PROFILE_ADVANCED:
+ gst_vaapi_decoder_set_pixel_aspect_ratio(base_decoder,
+ adv_hdr->par_n,
+ adv_hdr->par_d);
+ break;
+ default:
+ g_assert(0 && "XXX: we already validated the profile above");
+ break;
+ }
+
+ switch (seq_hdr->profile) {
+ case GST_VC1_PROFILE_SIMPLE:
+ case GST_VC1_PROFILE_MAIN:
width = seq_hdr->struct_c.coded_width;
height = seq_hdr->struct_c.coded_height;
break;
--
1.7.11.2
More information about the Libva
mailing list