[Libva] Evaluate VP9 Hardware accelerated encode/decode on KabyLake
Charles, Daniel
daniel.charles at intel.com
Thu Dec 8 01:24:34 UTC 2016
That's not expected, libdrm should also compile ok on the defaults.
Normally what I see Ubuntu users do is to run $sudo make install
If you just want to install it on a custom folder, --prefix=<some_dir>
should be sufficient for all packages you listed, no need to mess up
with --exec-dir
--
Daniel.
On Wed, Dec 7, 2016 at 5:07 PM, Vijayaraghavan, Vasavee
<vasavee.vijayaraghavan at intel.com> wrote:
> Hi Daniel.
> I believe so, I used this configuration because my libdrm doesn’t build if I use the default config options.
>
> -Thanks
> Vasavee
>
> -----Original Message-----
> From: Charles, Daniel [mailto:daniel.charles at intel.com]
> Sent: Wednesday, December 7, 2016 3:36 PM
> To: Vijayaraghavan, Vasavee <vasavee.vijayaraghavan at intel.com>
> Cc: Xiang, Haihao <haihao.xiang at intel.com>; libva at lists.freedesktop.org
> Subject: Re: [Libva] Evaluate VP9 Hardware accelerated encode/decode on KabyLake
>
> Hello Vasavee,
>
> Is your user allowed to write files on the --prefix=/usr and the --exec-prefix=/ directories?
>
> If you want to install it on the default place you don't need to specify those
>
> --
> Daniel.
>
> On Wed, Dec 7, 2016 at 2:24 PM, Vijayaraghavan, Vasavee <vasavee.vijayaraghavan at intel.com> wrote:
>> Hi Haihao,
>>
>> I am trying to build the intel graphics stack on Ubuntu 16.10 with:
>> -linux kernel version 4.8.0 (default kernel that comes with Ubuntu
>> 16.10) -libdrm version 2.4.68 -libva version 1.7.3
>>
>> I am having trouble upgrading the libva-intel-driver-1.7.3.
>> I have error while trying to compile it (I used this for configuring:
>> ./configure --prefix=/usr --exec-prefix=/) Error below:
>> user at test-MS-B142:~/Downloads/libva-intel-driver-1.7.3$ make Making
>> all in debian.upstream
>> make[1]: Entering directory '/home/user/Downloads/libva-intel-driver-1.7.3/debian.upstream'
>> make[1]: Nothing to be done for 'all'.
>> make[1]: Leaving directory '/home/user/Downloads/libva-intel-driver-1.7.3/debian.upstream'
>> Making all in src
>> make[1]: Entering directory '/home/user/Downloads/libva-intel-driver-1.7.3/src'
>> GEN intel_version.h
>> make all-recursive
>> make[2]: Entering directory '/home/user/Downloads/libva-intel-driver-1.7.3/src'
>> Making all in shaders
>> make[3]: Entering directory '/home/user/Downloads/libva-intel-driver-1.7.3/src/shaders'
>> Making all in h264
>> make[4]: Entering directory '/home/user/Downloads/libva-intel-driver-1.7.3/src/shaders/h264'
>> Making all in ildb
>> make[5]: Entering directory '/home/user/Downloads/libva-intel-driver-1.7.3/src/shaders/h264/ildb'
>> make[5]: Nothing to be done for 'all'.
>> make[5]: Leaving directory '/home/user/Downloads/libva-intel-driver-1.7.3/src/shaders/h264/ildb'
>> Making all in mc
>> make[5]: Entering directory '/home/user/Downloads/libva-intel-driver-1.7.3/src/shaders/h264/mc'
>> make[5]: Nothing to be done for 'all'.
>> make[5]: Leaving directory '/home/user/Downloads/libva-intel-driver-1.7.3/src/shaders/h264/mc'
>> make[5]: Entering directory '/home/user/Downloads/libva-intel-driver-1.7.3/src/shaders/h264'
>> make[5]: Nothing to be done for 'all-am'.
>> make[5]: Leaving directory '/home/user/Downloads/libva-intel-driver-1.7.3/src/shaders/h264'
>> make[4]: Leaving directory '/home/user/Downloads/libva-intel-driver-1.7.3/src/shaders/h264'
>> Making all in mpeg2
>> make[4]: Entering directory '/home/user/Downloads/libva-intel-driver-1.7.3/src/shaders/mpeg2'
>> Making all in vld
>> make[5]: Entering directory '/home/user/Downloads/libva-intel-driver-1.7.3/src/shaders/mpeg2/vld'
>> GEN frame_intra.g4b
>> frame_intra.g4s: 1: syntax error at ""
>> Makefile:560: recipe for target 'frame_intra.g4b' failed
>> make[5]: *** [frame_intra.g4b] Error 1
>> make[5]: Leaving directory '/home/user/Downloads/libva-intel-driver-1.7.3/src/shaders/mpeg2/vld'
>> Makefile:366: recipe for target 'all-recursive' failed
>> make[4]: *** [all-recursive] Error 1
>> make[4]: Leaving directory '/home/user/Downloads/libva-intel-driver-1.7.3/src/shaders/mpeg2'
>> Makefile:367: recipe for target 'all-recursive' failed
>> make[3]: *** [all-recursive] Error 1
>> make[3]: Leaving directory '/home/user/Downloads/libva-intel-driver-1.7.3/src/shaders'
>> Makefile:1170: recipe for target 'all-recursive' failed
>> make[2]: *** [all-recursive] Error 1
>> make[2]: Leaving directory '/home/user/Downloads/libva-intel-driver-1.7.3/src'
>> Makefile:595: recipe for target 'all' failed
>> make[1]: *** [all] Error 2
>> make[1]: Leaving directory '/home/user/Downloads/libva-intel-driver-1.7.3/src'
>> Makefile:403: recipe for target 'all-recursive' failed
>> make: *** [all-recursive] Error 1
>>
>> Output of vainfo:
>> libva info: VA-API version 0.39.2
>> libva info: va_getDriverName() returns 0 libva info: Trying to open
>> /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so
>> libva info: Found init function __vaDriverInit_0_39 libva info:
>> va_openDriver() returns 0
>> vainfo: VA-API version: 0.39 (libva 1.7.3)
>> vainfo: Driver version: Intel i965 driver for Intel(R) Kabylake -
>> 1.7.1
>> vainfo: Supported profile and entrypoints
>> VAProfileMPEG2Simple : VAEntrypointVLD
>> VAProfileMPEG2Simple : VAEntrypointEncSlice
>> VAProfileMPEG2Main : VAEntrypointVLD
>> VAProfileMPEG2Main : VAEntrypointEncSlice
>> VAProfileH264ConstrainedBaseline: VAEntrypointVLD
>> VAProfileH264ConstrainedBaseline: VAEntrypointEncSlice
>> VAProfileH264Main : VAEntrypointVLD
>> VAProfileH264Main : VAEntrypointEncSlice
>> VAProfileH264High : VAEntrypointVLD
>> VAProfileH264High : VAEntrypointEncSlice
>> VAProfileH264MultiviewHigh : VAEntrypointVLD
>> VAProfileH264MultiviewHigh : VAEntrypointEncSlice
>> VAProfileH264StereoHigh : VAEntrypointVLD
>> VAProfileH264StereoHigh : VAEntrypointEncSlice
>> VAProfileVC1Simple : VAEntrypointVLD
>> VAProfileVC1Main : VAEntrypointVLD
>> VAProfileVC1Advanced : VAEntrypointVLD
>> VAProfileNone : VAEntrypointVideoProc
>> VAProfileJPEGBaseline : VAEntrypointVLD
>> VAProfileJPEGBaseline : VAEntrypointEncPicture
>> VAProfileVP8Version0_3 : VAEntrypointVLD
>> VAProfileVP8Version0_3 : VAEntrypointEncSlice
>> VAProfileHEVCMain : VAEntrypointVLD
>> VAProfileHEVCMain : VAEntrypointEncSlice
>> VAProfileHEVCMain10 : VAEntrypointVLD
>> VAProfileVP9Profile0 : VAEntrypointVLD
>> VAProfileVP9Profile0 : VAEntrypointEncSlice
>> VAProfileVP9Profile2 : VAEntrypointVLD
>>
>> -Thanks
>> Vasavee
>>
>> -----Original Message-----
>> From: Xiang, Haihao
>> Sent: Tuesday, November 29, 2016 12:12 AM
>> To: Vijayaraghavan, Vasavee <vasavee.vijayaraghavan at intel.com>;
>> libva at lists.freedesktop.org
>> Subject: Re: [Libva] Evaluate VP9 Hardware accelerated encode/decode
>> on KabyLake
>>
>>
>> 1. Linux kernel
>>
>> It would be better to install a recent stable kernel or rc kernel. The kernel in the specific Linux OS might not support Kabylake.
>>
>> 2. Mesa/Cairo
>>
>> It is not needed.
>>
>> 3. Xorg / xf86-video-intel
>>
>> It is not needed if you won't playback a video, otherwise you should check xf86-video-intel supports Kabylake or not. Usually you needn't update Xorg.
>>
>> 4. libdrm
>>
>> libdrm in the specific Linux OS might not support Kabylake, so it would be better to install a recent version of libdrm.
>>
>> 5. libva/libva-intel-driver
>>
>> The latest version is 1.7.3
>>
>> Thanks
>> Haihao
>>
>>> Sorry, didn’t realize I had to reply all. Reposting my message again:
>>>
>>> Hi Haihao,
>>>
>>> Thank you for your response.
>>> I am not sure if I have to use a specific software for my tests, but
>>> looking a bit about the below three options (ffmpeg, gstreamer and
>>> libyami) and assuming I go with libyami, do I have to:
>>>
>>> 1. Simply Follow the build procedure given here: https://github.com/0
>>> 1org/libyami/wiki/Build after installing the specific Linux OS
>>>
>>> (Or)
>>>
>>> 2. Do I have to build the entire graphics software stack after
>>> installing the Linux OS including:
>>>
>>> Linux Kernel - 4.7.2
>>> Mesa - 12.0.1
>>> xf86-video-intel - 2.99.917
>>> Libdrm - 2.4.68
>>> Libva - 1.7.2
>>> vaapi intel-driver - 1.7.2
>>> Cairo - 1.15.2
>>> Xorg Xserver - 1.18.3
>>>
>>> as mentioned in https://01.org/linuxgraphics/downloads/2016q3-intel-g
>>> raphics-stack-release
>>>
>>> -Best Regards,
>>> Vasavee
>>>
>>> -----Original Message-----
>>> From: Xiang, Haihao
>>> Sent: Monday, November 28, 2016 8:16 PM
>>> To: Vijayaraghavan, Vasavee <vasavee.vijayaraghavan at intel.com>; libva
>>> @lists.freedesktop.org
>>> Subject: Re: [Libva] Evaluate VP9 Hardware accelerated encode/decode
>>> on KabyLake
>>>
>>>
>>> Hi Vasavee,
>>>
>>> You can run a software using VA-API to evaluate VP9 hardware
>>> accelerated encode/decode, suc as:
>>>
>>> libyami:
>>> https://github.com/01org/libyami (core) https://github.com/01org/liby
>>> ami-utils (utilities based on libyami)
>>>
>>> gstreamer-vaapi
>>> https://gstreamer.freedesktop.org/modules/gstreamer-vaapi.html
>>>
>>> or a FFmpeg/Libav based player which enables HW accelerated decode.
>>>
>>> Thanks
>>> Haihao
>>>
>>>
>>>
>>> > Hi all,
>>> >
>>> > I am new to this subscription list.
>>> > I want to evaluate VP9 hardware accelerated encode/decode on
>>> > KabyLake.
>>> > Can someone give me useful pointers as in where I can get started
>>> > to run hardware accelerated encode/decode tests on KabyLake? I am
>>> > targeting to run the tests on Linux OS.
>>> >
>>> > Best Regards,
>>> > Vasavee
>>> >
>>> > _______________________________________________
>>> > Libva mailing list
>>> > Libva at lists.freedesktop.org
>>> > https://lists.freedesktop.org/mailman/listinfo/libva
>> _______________________________________________
>> Libva mailing list
>> Libva at lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/libva
More information about the Libva
mailing list